Merge pull request #6 from adafruit/main

Merging latest changes
This commit is contained in:
Enrique Casado 2020-12-04 11:44:37 +01:00 committed by GitHub
commit d64d48ed3a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
276 changed files with 9353 additions and 1919 deletions

View File

@ -14,7 +14,7 @@ on:
jobs:
test:
runs-on: ubuntu-18.04
runs-on: ubuntu-20.04
steps:
- name: Dump GitHub context
env:
@ -119,6 +119,7 @@ jobs:
zip -9r circuitpython-stubs.zip circuitpython-stubs
[ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp circuitpython-stubs.zip s3://adafruit-circuit-python/bin/stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip --no-progress --region us-east-1
env:
AWS_PAGER: ''
AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested'))
@ -159,13 +160,14 @@ jobs:
run: |
[ -z "$AWS_ACCESS_KEY_ID" ] || aws s3 cp mpy-cross/mpy-cross s3://adafruit-circuit-python/bin/mpy-cross/mpy-cross-macos-catalina-${{ env.CP_VERSION }} --no-progress --region us-east-1
env:
AWS_PAGER: ''
AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested'))
build-arm:
runs-on: ubuntu-18.04
runs-on: ubuntu-20.04
needs: test
strategy:
fail-fast: false
@ -196,6 +198,8 @@ jobs:
- "circuitplayground_express_displayio"
- "clue_nrf52840_express"
- "cp32-m4"
- "cp_sapling_m0"
- "cp_sapling_m0_spiflash"
- "datalore_ip_m4"
- "datum_distance"
- "datum_imu"
@ -315,7 +319,8 @@ jobs:
- "teensy40"
- "teensy41"
- "teknikio_bluebird"
- "thunderpack"
- "thunderpack_v11"
- "thunderpack_v12"
- "tinkeringtech_scoutmakes_azul"
- "trellis_m4_express"
- "trinket_m0"
@ -363,12 +368,13 @@ jobs:
- name: Upload to S3
run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1"
env:
AWS_PAGER: ''
AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested'))
build-riscv:
runs-on: ubuntu-18.04
runs-on: ubuntu-20.04
needs: test
strategy:
fail-fast: false
@ -411,11 +417,12 @@ jobs:
- name: Upload to S3
run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1"
env:
AWS_PAGER: ''
AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested'))
build-xtensa:
runs-on: ubuntu-latest
runs-on: ubuntu-20.04
needs: test
strategy:
fail-fast: false
@ -505,6 +512,7 @@ jobs:
- name: Upload to S3
run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1"
env:
AWS_PAGER: ''
AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
if: github.event_name == 'push' || (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested'))

View File

@ -10,7 +10,7 @@ on:
jobs:
website:
runs-on: ubuntu-latest
runs-on: ubuntu-20.04
steps:
- name: Dump GitHub context
env:

View File

@ -11,7 +11,7 @@ on:
jobs:
pre-commit:
runs-on: ubuntu-latest
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v1
- uses: actions/setup-python@v1

5
.gitmodules vendored
View File

@ -152,4 +152,7 @@
url = https://github.com/adafruit/Adafruit_CircuitPython_RFM69.git
[submodule "ports/esp32s2/esp-idf"]
path = ports/esp32s2/esp-idf
url = https://github.com/espressif/esp-idf.git
url = https://github.com/jepler/esp-idf.git
[submodule "ports/esp32s2/certificates/nina-fw"]
path = ports/esp32s2/certificates/nina-fw
url = https://github.com/adafruit/nina-fw.git

View File

@ -114,14 +114,14 @@ Behavior
finishes or is interrupted. After it is done running, the vm and
hardware is reinitialized. **This means you cannot read state from**
``code.py`` **in the REPL anymore.** CircuitPython's goal for this
change includes reduce confusion about pins and memory being used.
change includes reducing confusion about pins and memory being used.
- After ``code.py`` the REPL can be entered by pressing any key. It no
longer shares state with ``code.py`` so it is a fresh vm.
- Autoreload state will be maintained across reload.
- Adds a safe mode that does not run user code after a hard crash or
brown out. The hope is that this will make it easier to fix code that
causes nasty crashes by making it available through mass storage
after the crash. A reset (the button) is needed after its fixed to
after the crash. A reset (the button) is needed after it's fixed to
get back into normal mode.
- RGB status LED indicating CircuitPython state, and errors through a sequence of colored flashes.
- Re-runs ``code.py`` or other main file after file system writes over USB mass storage. (Disable with

View File

@ -172,6 +172,7 @@ exclude_patterns = ["**/build*",
"ports/atmel-samd/tools",
"ports/cxd56/mkspk",
"ports/cxd56/spresense-exported-sdk",
"ports/esp32s2/certificates",
"ports/esp32s2/esp-idf",
"ports/esp32s2/peripherals",
"ports/litex/hw",

View File

@ -21,7 +21,7 @@
STATIC uintptr_t machine_mem_get_addr(mp_obj_t addr_o, uint align) {
uintptr_t addr = mp_obj_int_get_truncated(addr_o);
if ((addr & (align - 1)) != 0) {
nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, translate("address %08x is not aligned to %d bytes"), addr, align));
mp_raise_ValueError_varg(translate("address %08x is not aligned to %d bytes"), addr, align);
}
return addr;
}

View File

@ -62,7 +62,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(mod_uheapq_heappush_obj, mod_uheapq_heappush);
STATIC mp_obj_t mod_uheapq_heappop(mp_obj_t heap_in) {
mp_obj_list_t *heap = get_heap(heap_in);
if (heap->len == 0) {
nlr_raise(mp_obj_new_exception_msg(&mp_type_IndexError, translate("empty heap")));
mp_raise_IndexError(translate("empty heap"));
}
mp_obj_t item = heap->items[0];
heap->len -= 1;

View File

@ -57,6 +57,8 @@ typedef struct _ujson_stream_t {
int errcode;
mp_obj_t python_readinto[2 + 1];
mp_obj_array_t bytearray_obj;
size_t start;
size_t end;
byte cur;
} ujson_stream_t;
@ -77,28 +79,44 @@ STATIC byte ujson_stream_next(ujson_stream_t *s) {
return s->cur;
}
// We read from an object's `readinto` method in chunks larger than the json
// parser needs to reduce the number of function calls done.
#define CIRCUITPY_JSON_READ_CHUNK_SIZE 64
STATIC mp_uint_t ujson_python_readinto(mp_obj_t obj, void *buf, mp_uint_t size, int *errcode) {
(void) size; // Ignore size because we know it's always 1.
ujson_stream_t* s = obj;
s->bytearray_obj.items = buf;
s->bytearray_obj.len = size;
*errcode = 0;
mp_obj_t ret = mp_call_method_n_kw(1, 0, s->python_readinto);
if (ret == mp_const_none) {
*errcode = MP_EAGAIN;
return MP_STREAM_ERROR;
if (s->start == s->end) {
*errcode = 0;
mp_obj_t ret = mp_call_method_n_kw(1, 0, s->python_readinto);
if (ret == mp_const_none) {
*errcode = MP_EAGAIN;
return MP_STREAM_ERROR;
}
s->start = 0;
s->end = mp_obj_get_int(ret);
}
return mp_obj_get_int(ret);
*((uint8_t *)buf) = ((uint8_t*) s->bytearray_obj.items)[s->start];
s->start++;
return 1;
}
STATIC mp_obj_t _mod_ujson_load(mp_obj_t stream_obj, bool return_first_json) {
const mp_stream_p_t *stream_p = mp_proto_get(MP_QSTR_protocol_stream, stream_obj);
ujson_stream_t s;
uint8_t character_buffer[CIRCUITPY_JSON_READ_CHUNK_SIZE];
if (stream_p == NULL) {
s.start = 0;
s.end = 0;
mp_load_method(stream_obj, MP_QSTR_readinto, s.python_readinto);
s.bytearray_obj.base.type = &mp_type_bytearray;
s.bytearray_obj.typecode = BYTEARRAY_TYPECODE;
s.bytearray_obj.len = CIRCUITPY_JSON_READ_CHUNK_SIZE;
s.bytearray_obj.free = 0;
// len and items are set at read time
s.bytearray_obj.items = character_buffer;
s.python_readinto[2] = MP_OBJ_FROM_PTR(&s.bytearray_obj);
s.stream_obj = &s;
s.read = ujson_python_readinto;

View File

@ -43,7 +43,7 @@ STATIC mp_obj_t match_group(mp_obj_t self_in, mp_obj_t no_in) {
mp_obj_match_t *self = MP_OBJ_TO_PTR(self_in);
mp_int_t no = mp_obj_get_int(no_in);
if (no < 0 || no >= self->num_matches) {
nlr_raise(mp_obj_new_exception_arg1(&mp_type_IndexError, no_in));
mp_raise_arg1(&mp_type_IndexError, no_in);
}
const char *start = self->caps[no * 2];
@ -82,7 +82,7 @@ STATIC void match_span_helper(size_t n_args, const mp_obj_t *args, mp_obj_t span
if (n_args == 2) {
no = mp_obj_get_int(args[1]);
if (no < 0 || no >= self->num_matches) {
nlr_raise(mp_obj_new_exception_arg1(&mp_type_IndexError, args[1]));
mp_raise_arg1(&mp_type_IndexError, args[1]);
}
}
@ -326,7 +326,7 @@ STATIC mp_obj_t re_sub_helper(mp_obj_t self_in, size_t n_args, const mp_obj_t *a
}
if (match_no >= (unsigned int)match->num_matches) {
nlr_raise(mp_obj_new_exception_arg1(&mp_type_IndexError, MP_OBJ_NEW_SMALL_INT(match_no)));
mp_raise_arg1(&mp_type_IndexError, MP_OBJ_NEW_SMALL_INT(match_no));
}
const char *start_match = match->caps[match_no * 2];

View File

@ -179,7 +179,7 @@ STATIC mp_obj_t mod_uzlib_decompress(size_t n_args, const mp_obj_t *args) {
return res;
error:
nlr_raise(mp_obj_new_exception_arg1(&mp_type_ValueError, MP_OBJ_NEW_SMALL_INT(st)));
mp_raise_arg1(&mp_type_ValueError, MP_OBJ_NEW_SMALL_INT(st));
}
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(mod_uzlib_decompress_obj, 1, 3, mod_uzlib_decompress);

@ -1 +1 @@
Subproject commit 8242b84753355433b61230ab6631c06e5ac77f35
Subproject commit aa7e741530df471d206a4a321823a37a913a0eb8

View File

@ -24,7 +24,7 @@ typedef struct _mp_obj_vfs_posix_file_t {
#ifdef MICROPY_CPYTHON_COMPAT
STATIC void check_fd_is_open(const mp_obj_vfs_posix_file_t *o) {
if (o->fd < 0) {
nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, translate("I/O operation on closed file")));
mp_raise_ValueError(translate("I/O operation on closed file"));
}
}
#else

@ -1 +1 @@
Subproject commit 43017e30a1e772b67ac68293a944e863c031e389
Subproject commit 53902152c674b0ba31536b50291f7ddd28960f47

@ -1 +1 @@
Subproject commit de6b7704c530d886ad8dfa0fa1864764d86117ee
Subproject commit 902c16f49197a8baf5e71ec924a812a86e733a74

@ -1 +1 @@
Subproject commit 8b2c82255750488232eae72f3d5dcbacfd6227f3
Subproject commit 218b80e63ab6ff87c1851e403f08b3d716d68f5e

View File

@ -101,7 +101,7 @@ STATIC int parse_compile_execute(const void *source, mp_parse_input_kind_t input
#endif
}
// If the code was loaded from a file its likely to be running for a while so we'll long
// If the code was loaded from a file it's likely to be running for a while so we'll long
// live it and collect any garbage before running.
if (input_kind == MP_PARSE_FILE_INPUT) {
module_fun = make_obj_long_lived(module_fun, 6);
@ -132,6 +132,10 @@ STATIC int parse_compile_execute(const void *source, mp_parse_input_kind_t input
if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_SystemExit)) {
// at the moment, the value of SystemExit is unused
ret = pyexec_system_exit;
#if CIRCUITPY_ALARM
} else if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_DeepSleepRequest)) {
ret = PYEXEC_DEEP_SLEEP;
#endif
} else {
if ((mp_obj_t) nlr.ret_val != MP_OBJ_FROM_PTR(&MP_STATE_VM(mp_reload_exception))) {
mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);

View File

@ -49,6 +49,7 @@ extern int pyexec_system_exit;
#define PYEXEC_FORCED_EXIT (0x100)
#define PYEXEC_SWITCH_MODE (0x200)
#define PYEXEC_EXCEPTION (0x400)
#define PYEXEC_DEEP_SLEEP (0x800)
int pyexec_raw_repl(void);
int pyexec_friendly_repl(void);

View File

@ -5,7 +5,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-10-10 23:51+0000\n"
"Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@ -300,7 +300,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr "Semua perangkat I2C sedang digunakan"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -336,6 +338,7 @@ msgstr "Semua timer untuk pin ini sedang digunakan"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -435,6 +438,11 @@ msgstr "Di bawah frame rate minimum"
msgid "Bit clock and word select must share a clock unit"
msgstr "Bit clock dan word harus memiliki kesamaan pada clock unit"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Kedalaman bit harus kelipatan 8."
@ -496,7 +504,8 @@ msgstr "Panjang buffer harus kelipatan 512"
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Penyangga harus memiliki panjang setidaknya 1"
@ -854,6 +863,10 @@ msgstr "Diharapkan sebuah UUID"
msgid "Expected an Address"
msgstr "Diharapkan sebuah Alamat"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -867,6 +880,10 @@ msgstr "Penyebaran yang diperluas dengan respon pindai tidak didukung."
msgid "FFT is defined for ndarrays only"
msgstr "FFT didefinisikan hanya untuk ndarrays"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -996,6 +1013,10 @@ msgstr "Gagal Inisialisasi I2C"
msgid "I2SOut not available"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1013,6 +1034,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "Ukuran penyangga salah"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1093,6 +1118,7 @@ msgid "Invalid byteorder string"
msgstr "String byteorder tidak valid"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Periode penangkapan tidak valid. Kisaran yang valid: 1 - 500"
@ -1269,6 +1295,10 @@ msgstr "Harus menyediakan pin MISO atau MOSI"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Harus menggunakan kelipatan 6 pin rgb, bukan %d"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr "Nama terlalu panjang"
@ -1287,6 +1317,11 @@ msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip"
msgid "No DMA channel found"
msgstr "tidak ada channel DMA ditemukan"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1421,14 +1456,14 @@ msgstr "Parity ganjil tidak didukung"
msgid "Only 8 or 16 bit mono with "
msgstr "Hanya 8 atau 16 bit mono dengan "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1446,6 +1481,10 @@ msgstr ""
"Hanya monokrom, 4bpp atau 8bpp yang diindeks, dan 16bpp atau lebih yang "
"didukung: %d bpp diberikan"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1505,6 +1544,10 @@ msgstr "Pin harus mendukung interupsi perangkat keras"
msgid "Pin number already reserved by EXTI"
msgstr "Nomor pin sudah dipesan oleh EXTI"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1571,7 +1614,7 @@ msgstr "Pembalikan RS485 ditentukan saat tidak dalam mode RS485"
msgid "RTC calibration is not supported on this board"
msgstr "Kalibrasi RTC tidak didukung pada board ini"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "RTC tidak didukung di board ini"
@ -1718,6 +1761,10 @@ msgstr "Aliran tidak menemukan metode readinto() atau write()."
msgid "Supply at least one UART pin"
msgstr "Berikan setidaknya satu pin UART"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1785,6 +1832,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1981,7 +2032,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr "PERINGATAN: Nama file kode anda mempunyai dua ekstensi\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2066,10 +2117,6 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -2078,6 +2125,10 @@ msgstr ""
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr ""
@ -2095,14 +2146,22 @@ msgstr "argumen num/types tidak cocok"
msgid "argument should be a '%q' not a '%q'"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2112,15 +2171,15 @@ msgid "attributes not supported yet"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2325,6 +2384,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
@ -2341,10 +2404,6 @@ msgstr ""
msgid "cannot perform relative import"
msgstr "tidak dapat melakukan relative import"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr ""
@ -2417,10 +2476,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2429,6 +2484,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2437,10 +2496,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
@ -2470,6 +2525,10 @@ msgstr ""
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2499,6 +2558,10 @@ msgstr ""
msgid "end_x should be an int"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2585,6 +2648,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
@ -2638,8 +2705,8 @@ msgstr "fungsi mendapatkan nilai ganda untuk argumen '%q'"
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2709,6 +2776,7 @@ msgstr "lapisan (padding) tidak benar"
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index keluar dari jangkauan"
@ -2733,6 +2801,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr "inline assembler harus sebuah fungsi"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2741,6 +2813,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2753,6 +2829,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr ""
@ -2765,6 +2857,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr ""
@ -2835,6 +2931,10 @@ msgstr ""
msgid "invalid syntax for number"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
@ -2933,6 +3033,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
@ -2982,10 +3086,6 @@ msgstr ""
msgid "must use keyword argument for key function"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""
@ -3068,6 +3168,10 @@ msgstr "non-keyword arg setelah */**"
msgid "non-keyword arg after keyword arg"
msgstr "non-keyword arg setelah keyword arg"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
@ -3080,10 +3184,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3136,6 +3236,10 @@ msgstr ""
msgid "odd-length string"
msgstr "panjang data string memiliki keganjilan (odd-length)"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
#, fuzzy
msgid "offset out of bounds"
@ -3159,6 +3263,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
@ -3249,6 +3361,7 @@ msgstr ""
msgid "pow() with 3 arguments requires integers"
msgstr ""
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3292,6 +3405,10 @@ msgstr "relative import"
msgid "requested length %d but object has length %d"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "anotasi return harus sebuah identifier"
@ -3310,8 +3427,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3337,7 +3454,7 @@ msgid "script compilation not supported"
msgstr "kompilasi script tidak didukung"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3380,10 +3497,6 @@ msgstr "memulai ulang software(soft reboot)\n"
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3464,6 +3577,7 @@ msgstr ""
msgid "time.struct_time() takes a 9-sequence"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3489,6 +3603,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""
@ -3506,6 +3624,10 @@ msgstr ""
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr ""
@ -3648,6 +3770,14 @@ msgstr ""
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3660,12 +3790,12 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c

View File

@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@ -296,7 +296,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr ""
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -332,6 +334,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -429,6 +432,11 @@ msgstr ""
msgid "Bit clock and word select must share a clock unit"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr ""
@ -490,7 +498,8 @@ msgstr ""
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr ""
@ -836,6 +845,10 @@ msgstr ""
msgid "Expected an Address"
msgstr ""
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -849,6 +862,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -977,6 +994,10 @@ msgstr ""
msgid "I2SOut not available"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -992,6 +1013,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1072,6 +1097,7 @@ msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr ""
@ -1248,6 +1274,10 @@ msgstr ""
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1266,6 +1296,11 @@ msgstr ""
msgid "No DMA channel found"
msgstr ""
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1398,14 +1433,14 @@ msgstr ""
msgid "Only 8 or 16 bit mono with "
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1419,6 +1454,10 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1476,6 +1515,10 @@ msgstr ""
msgid "Pin number already reserved by EXTI"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1537,7 +1580,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr ""
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""
@ -1683,6 +1726,10 @@ msgstr ""
msgid "Supply at least one UART pin"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1746,6 +1793,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1941,7 +1992,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2020,10 +2071,6 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -2032,6 +2079,10 @@ msgstr ""
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr ""
@ -2049,14 +2100,22 @@ msgstr ""
msgid "argument should be a '%q' not a '%q'"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2066,15 +2125,15 @@ msgid "attributes not supported yet"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2278,6 +2337,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
@ -2294,10 +2357,6 @@ msgstr ""
msgid "cannot perform relative import"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr ""
@ -2370,10 +2429,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2382,6 +2437,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2390,10 +2449,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
@ -2423,6 +2478,10 @@ msgstr ""
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2452,6 +2511,10 @@ msgstr ""
msgid "end_x should be an int"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2538,6 +2601,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
@ -2591,8 +2658,8 @@ msgstr ""
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2662,6 +2729,7 @@ msgstr ""
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr ""
@ -2686,6 +2754,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2694,6 +2766,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2706,6 +2782,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr ""
@ -2718,6 +2810,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr ""
@ -2788,6 +2884,10 @@ msgstr ""
msgid "invalid syntax for number"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
@ -2886,6 +2986,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
@ -2935,10 +3039,6 @@ msgstr ""
msgid "must use keyword argument for key function"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""
@ -3021,6 +3121,10 @@ msgstr ""
msgid "non-keyword arg after keyword arg"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
@ -3033,10 +3137,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3089,6 +3189,10 @@ msgstr ""
msgid "odd-length string"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""
@ -3111,6 +3215,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
@ -3201,6 +3313,7 @@ msgstr ""
msgid "pow() with 3 arguments requires integers"
msgstr ""
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3244,6 +3357,10 @@ msgstr ""
msgid "requested length %d but object has length %d"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
@ -3262,8 +3379,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3289,7 +3406,7 @@ msgid "script compilation not supported"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3332,10 +3449,6 @@ msgstr ""
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3416,6 +3529,7 @@ msgstr ""
msgid "time.struct_time() takes a 9-sequence"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3440,6 +3554,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""
@ -3457,6 +3575,10 @@ msgstr ""
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr ""
@ -3599,6 +3721,14 @@ msgstr ""
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3611,12 +3741,12 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c

View File

@ -5,16 +5,16 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-05-24 03:22+0000\n"
"Last-Translator: dronecz <mzuzelka@gmail.com>\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-12-02 20:29+0000\n"
"Last-Translator: vkuthan <vit.kuthan@seznam.cz>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: cs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
"X-Generator: Weblate 4.1-dev\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -74,7 +74,7 @@ msgstr "%q index je mimo rozsah"
#: py/obj.c
msgid "%q indices must be integers, not %q"
msgstr ""
msgstr "%q indexy musí být celá čísla, ne %q"
#: shared-bindings/vectorio/Polygon.c
msgid "%q list must be a list"
@ -82,7 +82,7 @@ msgstr "Seznam %q musí být seznam"
#: shared-bindings/memorymonitor/AllocationAlarm.c
msgid "%q must be >= 0"
msgstr ""
msgstr "%q musí být >= 0"
#: shared-bindings/_bleio/CharacteristicBuffer.c
#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
@ -98,7 +98,7 @@ msgstr " %q musí být n-tice délky 2"
#: shared-bindings/canio/Match.c
msgid "%q out of range"
msgstr ""
msgstr "%q je mimo rozsah"
#: ports/atmel-samd/common-hal/microcontroller/Pin.c
msgid "%q pin invalid"
@ -122,35 +122,35 @@ msgstr ""
#: py/proto.c
msgid "'%q' object does not support '%q'"
msgstr ""
msgstr "Objekt '%q' nepodporuje '%q'"
#: py/obj.c
msgid "'%q' object does not support item assignment"
msgstr ""
msgstr "Objekt '%q' nepodporuje přiřazení položek"
#: py/obj.c
msgid "'%q' object does not support item deletion"
msgstr ""
msgstr "Objekt '%q' nepodporuje mazání položek"
#: py/runtime.c
msgid "'%q' object has no attribute '%q'"
msgstr ""
msgstr "Objekt '%q' nemá žádný atribut"
#: py/runtime.c
msgid "'%q' object is not an iterator"
msgstr ""
msgstr "Objekt '%q' není iterátor"
#: py/objtype.c py/runtime.c
msgid "'%q' object is not callable"
msgstr ""
msgstr "Objekt '%q' nelze volat"
#: py/runtime.c
msgid "'%q' object is not iterable"
msgstr ""
msgstr "Objekt '%q' není iterovatelný"
#: py/obj.c
msgid "'%q' object is not subscriptable"
msgstr ""
msgstr "Objekt '%q' nelze zapsat"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
@ -170,17 +170,17 @@ msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr ""
msgstr "'%s' očekává register FPU"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr ""
msgstr "'%s' očekává adresu ve formátu [a, b]"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr ""
msgstr "'%s' očekává integer (celé číslo)"
#: py/emitinlinethumb.c
#, c-format
@ -190,7 +190,7 @@ msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr ""
msgstr "'%s' očekává {r0, r1, ...}"
#: py/emitinlinextensa.c
#, c-format
@ -300,7 +300,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr ""
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -336,6 +338,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -433,6 +436,11 @@ msgstr ""
msgid "Bit clock and word select must share a clock unit"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr ""
@ -494,7 +502,8 @@ msgstr ""
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr ""
@ -840,6 +849,10 @@ msgstr ""
msgid "Expected an Address"
msgstr ""
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -853,6 +866,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -981,6 +998,10 @@ msgstr ""
msgid "I2SOut not available"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -996,6 +1017,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1076,6 +1101,7 @@ msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr ""
@ -1252,6 +1278,10 @@ msgstr ""
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1270,6 +1300,11 @@ msgstr ""
msgid "No DMA channel found"
msgstr ""
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1402,14 +1437,14 @@ msgstr ""
msgid "Only 8 or 16 bit mono with "
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1423,6 +1458,10 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1480,6 +1519,10 @@ msgstr ""
msgid "Pin number already reserved by EXTI"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1541,7 +1584,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr ""
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""
@ -1687,6 +1730,10 @@ msgstr ""
msgid "Supply at least one UART pin"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1750,6 +1797,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1945,7 +1996,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2024,10 +2075,6 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -2036,6 +2083,10 @@ msgstr ""
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr ""
@ -2053,14 +2104,22 @@ msgstr ""
msgid "argument should be a '%q' not a '%q'"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2070,15 +2129,15 @@ msgid "attributes not supported yet"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2282,6 +2341,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
@ -2298,10 +2361,6 @@ msgstr ""
msgid "cannot perform relative import"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr ""
@ -2374,10 +2433,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2386,6 +2441,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2394,10 +2453,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
@ -2427,6 +2482,10 @@ msgstr ""
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2456,6 +2515,10 @@ msgstr ""
msgid "end_x should be an int"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2542,6 +2605,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
@ -2595,8 +2662,8 @@ msgstr ""
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2666,6 +2733,7 @@ msgstr ""
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr ""
@ -2690,6 +2758,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2698,6 +2770,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2710,6 +2786,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr ""
@ -2722,6 +2814,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr ""
@ -2792,6 +2888,10 @@ msgstr ""
msgid "invalid syntax for number"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
@ -2890,6 +2990,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
@ -2939,10 +3043,6 @@ msgstr ""
msgid "must use keyword argument for key function"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""
@ -3025,6 +3125,10 @@ msgstr ""
msgid "non-keyword arg after keyword arg"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
@ -3037,10 +3141,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3093,6 +3193,10 @@ msgstr ""
msgid "odd-length string"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""
@ -3115,6 +3219,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
@ -3205,6 +3317,7 @@ msgstr ""
msgid "pow() with 3 arguments requires integers"
msgstr ""
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3248,6 +3361,10 @@ msgstr ""
msgid "requested length %d but object has length %d"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
@ -3266,8 +3383,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3293,7 +3410,7 @@ msgid "script compilation not supported"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3336,10 +3453,6 @@ msgstr ""
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3420,6 +3533,7 @@ msgstr ""
msgid "time.struct_time() takes a 9-sequence"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3444,6 +3558,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""
@ -3461,6 +3579,10 @@ msgstr ""
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr ""
@ -3603,6 +3725,14 @@ msgstr ""
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3615,12 +3745,12 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c

View File

@ -5,15 +5,15 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-06-16 18:24+0000\n"
"Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-11-26 03:11+0000\n"
"Last-Translator: Daniel Bravo Darriba <bravodarriba@gmail.com>\n"
"Language: de_DE\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Weblate 4.1.1-dev\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -57,7 +57,7 @@ msgstr "%d Adress-Pins und %d rgb-Pins zeigen eine Höhe von %d, nicht von %d"
#: ports/atmel-samd/common-hal/sdioio/SDCard.c
msgid "%q failure: %d"
msgstr ""
msgstr "%q Fehler: %d"
#: shared-bindings/microcontroller/Pin.c
msgid "%q in use"
@ -299,7 +299,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr "Alle I2C-Peripheriegeräte sind in Benutzung"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -335,6 +337,7 @@ msgstr "Alle timer für diesen Pin werden bereits benutzt"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -436,6 +439,11 @@ msgstr "Unterhalb der minimalen Frame Rate"
msgid "Bit clock and word select must share a clock unit"
msgstr "Bit clock und word select müssen eine clock unit teilen"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Bit depth muss ein Vielfaches von 8 sein."
@ -497,7 +505,8 @@ msgstr "Die Pufferlänge muss ein vielfaches von 512 sein"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Der Puffer muss ein vielfaches von 512 bytes sein"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Der Puffer muss eine Mindestenslänge von 1 haben"
@ -850,6 +859,10 @@ msgstr "Eine UUID wird erwartet"
msgid "Expected an Address"
msgstr "Erwartet eine Adresse"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -864,6 +877,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr "FFT ist nur für ndarrays definiert"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr "SSL Handshake fehlgeschlagen"
@ -996,6 +1013,10 @@ msgstr "I2C-Init-Fehler"
msgid "I2SOut not available"
msgstr "I2SOut nicht verfügbar"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1013,6 +1034,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "Inkorrekte Puffergröße"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1093,6 +1118,7 @@ msgid "Invalid byteorder string"
msgstr "Ungültige Byteorder String"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Ungültiger Aufnahmezeitraum. Gültiger Bereich: 1 - 500"
@ -1271,6 +1297,10 @@ msgstr "Muss MISO- oder MOSI-Pin bereitstellen"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Muss ein Vielfaches von 6 RGB-Pins verwenden, nicht %d"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr "Name zu lang"
@ -1289,6 +1319,11 @@ msgstr "Kein DAC im Chip vorhanden"
msgid "No DMA channel found"
msgstr "Kein DMA Kanal gefunden"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1423,14 +1458,14 @@ msgstr "Eine ungerade Parität wird nicht unterstützt"
msgid "Only 8 or 16 bit mono with "
msgstr "Nur 8 oder 16 bit mono mit "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1448,6 +1483,10 @@ msgstr ""
"Nur monochrome, indizierte 4bpp oder 8bpp, und 16bpp oder größere BMPs "
"unterstützt: %d bpp wurden gegeben"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1505,6 +1544,10 @@ msgstr "Pin muss Hardware-Interrupts unterstützen"
msgid "Pin number already reserved by EXTI"
msgstr "PIN-Nummer bereits von EXTI reserviert"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1571,7 +1614,7 @@ msgstr "RS485-Inversion angegeben, wenn nicht im RS485-Modus"
msgid "RTC calibration is not supported on this board"
msgstr "Die RTC-Kalibrierung wird auf diesem Board nicht unterstützt"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "Eine RTC wird auf diesem Board nicht unterstützt"
@ -1717,6 +1760,10 @@ msgstr "Stream fehlt readinto() oder write() Methode."
msgid "Supply at least one UART pin"
msgstr "Geben Sie mindestens einen UART-Pin an"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1791,6 +1838,10 @@ msgstr "Kachelwert außerhalb der Grenzen"
msgid "Tile width must exactly divide bitmap width"
msgstr "Die Kachelbreite muss die Bitmap-Breite genau teilen"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1994,7 +2045,7 @@ msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
"WARNUNG: Der Dateiname deines Programms hat zwei Dateityperweiterungen\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2083,10 +2134,6 @@ msgstr "Adresse außerhalb der Grenzen"
msgid "addresses is empty"
msgstr "adresses ist leer"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr "arctan2 ist nur für Skalare und ndarrays implementiert"
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "arg ist eine leere Sequenz"
@ -2095,6 +2142,10 @@ msgstr "arg ist eine leere Sequenz"
msgid "argsort argument must be an ndarray"
msgstr "Das Argument argsort muss ein ndarray sein"
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr "Argument hat falschen Typ"
@ -2112,14 +2163,22 @@ msgstr "Anzahl/Typen der Argumente passen nicht"
msgid "argument should be a '%q' not a '%q'"
msgstr "Argument sollte '%q' sein, nicht '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "Argumente müssen ndarrays sein"
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "Array/Bytes auf der rechten Seite erforderlich"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr "Sie haben versucht argmin/argmax von einer leeren Sequenz zu bekommen"
@ -2129,16 +2188,16 @@ msgid "attributes not supported yet"
msgstr "Attribute werden noch nicht unterstützt"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr "Die Achse muss -1, 0, Keine oder 1 sein"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr "Die Achse muss -1, 0 oder 1 sein"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgstr "Die Achse muss None, 0 oder 1 sein"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
msgid "bad compile mode"
@ -2349,6 +2408,10 @@ msgstr ""
"kann nicht von der manuellen Feldspezifikation zur automatischen "
"Feldnummerierung wechseln"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "Kann '%q' Instanzen nicht erstellen"
@ -2365,11 +2428,6 @@ msgstr "Name %q kann nicht importiert werden"
msgid "cannot perform relative import"
msgstr "kann keinen relativen Import durchführen"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
"Array kann nicht umgeformt werden (inkompatible Eingabe- / Ausgabeform)"
#: py/emitnative.c
msgid "casting"
msgstr "Umwandlung (cast)"
@ -2444,10 +2502,6 @@ msgstr "Convolve-Argumente müssen ndarrays sein"
msgid "convolve arguments must not be empty"
msgstr "Convolve Argumente dürfen nicht leer sein"
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr "Eingabearray konnte nicht aus der Form übertragen werden"
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "Vandermonde-Matrix konnte nicht invertiert werden"
@ -2456,6 +2510,10 @@ msgstr "Vandermonde-Matrix konnte nicht invertiert werden"
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2464,10 +2522,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr "ddof muss kleiner als die Länge des Datensatzes sein"
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "Dezimalzahlen nicht unterstützt"
@ -2499,6 +2553,10 @@ msgstr "Die Wörterbuch-Aktualisierungssequenz hat eine falsche Länge"
msgid "diff argument must be an ndarray"
msgstr "diff Argument muss ein ndarray sein"
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2528,6 +2586,10 @@ msgstr "Ende des Formats wärend der Suche nach einem conversion specifier"
msgid "end_x should be an int"
msgstr "end_x sollte ein int sein"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2614,6 +2676,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "Das erste Argument muss iterierbar sein"
@ -2667,9 +2733,9 @@ msgstr "Funktion hat mehrere Werte für Argument '%q'"
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr "Die Funktion ist nur für Skalare und Ndarrays implementiert"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
@ -2739,6 +2805,7 @@ msgstr "padding ist inkorrekt"
msgid "index is out of bounds"
msgstr "Index ist außerhalb der Grenzen"
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index außerhalb der Reichweite"
@ -2763,6 +2830,10 @@ msgstr "Länge von initial_value ist falsch"
msgid "inline assembler must be a function"
msgstr "inline assembler muss eine function sein"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr "Das Eingabeargument muss eine Ganzzahl oder ein 2-Tupel sein"
@ -2771,6 +2842,10 @@ msgstr "Das Eingabeargument muss eine Ganzzahl oder ein 2-Tupel sein"
msgid "input array length must be power of 2"
msgstr "Die Länge des Eingabearrays muss eine Potenz von 2 sein"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr "Eingabedaten müssen iterierbar sein"
@ -2783,6 +2858,22 @@ msgstr "Eingabematrix ist asymmetrisch"
msgid "input matrix is singular"
msgstr "Eingabematrix ist singulär"
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "Die Eingabe muss eine quadratische Matrix sein"
@ -2795,6 +2886,10 @@ msgstr "Die Eingabe muss Tupel, Liste, Bereich oder Ndarray sein"
msgid "input vectors must be of equal length"
msgstr "Eingabevektoren müssen gleich lang sein"
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "int() arg 2 muss >= 2 und <= 36 sein"
@ -2865,6 +2960,10 @@ msgstr "ungültige Syntax für integer mit Basis %d"
msgid "invalid syntax for number"
msgstr "ungültige Syntax für number"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass() arg 1 muss eine Klasse sein"
@ -2969,6 +3068,10 @@ msgstr "max_length muss 0-%d sein, wenn fixed_length %s ist"
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "maximale Rekursionstiefe überschritten"
@ -3018,10 +3121,6 @@ msgstr "muss ein Objekt verursachen (raise)"
msgid "must use keyword argument for key function"
msgstr "muss Schlüsselwortargument für key function verwenden"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr "n muss zwischen 0 und 9 liegen"
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "Name '%q' ist nirgends definiert worden (Schreibweise kontrollieren)"
@ -3104,6 +3203,10 @@ msgstr "Nicht-Schlüsselwort arg nach * / **"
msgid "non-keyword arg after keyword arg"
msgstr "Nicht-Schlüsselwort Argument nach Schlüsselwort Argument"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "keine 128-bit UUID"
@ -3117,10 +3220,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr "Nicht genügend Argumente für den Formatierungs-String"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr "Die Anzahl der Argumente muss 2 oder 3 sein"
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr "Die Anzahl der Punkte muss mindestens 2 betragen"
@ -3173,6 +3272,10 @@ msgstr "Objekt mit Pufferprotokoll (buffer protocol) erforderlich"
msgid "odd-length string"
msgstr "String mit ungerader Länge"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "offset außerhalb der Grenzen"
@ -3196,6 +3299,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr "Operanden konnten nicht zusammen gesendet werden"
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "Die Operation ist für ndarrays nicht implementiert"
@ -3288,6 +3399,7 @@ msgstr "pow() drittes Argument darf nicht 0 sein"
msgid "pow() with 3 arguments requires integers"
msgstr "pow () mit 3 Argumenten erfordert Integer"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3331,6 +3443,10 @@ msgstr "relativer Import"
msgid "requested length %d but object has length %d"
msgstr "die ersuchte Länge ist %d, aber das Objekt hat eine Länge von %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "Rückgabewert-Beschreibung muss ein Identifier sein"
@ -3349,9 +3465,9 @@ msgstr "rgb_pins[%d] dupliziert eine andere Pinbelegung"
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins [%d] befindet sich nicht am selben Port wie clock"
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr "Die rechte Seite muss ein Ndarray oder ein Skalar sein"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
msgid "rsplit(None,n)"
@ -3378,8 +3494,8 @@ msgid "script compilation not supported"
msgstr "kompilieren von Skripten nicht unterstützt"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr "Form muss ein 2-Tupel sein"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
msgid "sign not allowed in string format specifier"
@ -3421,10 +3537,6 @@ msgstr "weicher reboot\n"
msgid "sort argument must be an ndarray"
msgstr "sortierungs Argument muss ein ndarray sein"
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3506,6 +3618,7 @@ msgstr "threshold muss im Intervall 0-65536 liegen"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() nimmt eine 9-Sequenz an"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr "Das Zeitlimit hat den maximal zulässigen Wert überschritten"
@ -3530,6 +3643,10 @@ msgstr "Zeitlimit beim warten auf v2 Karte"
msgid "timestamp out of range for platform time_t"
msgstr "Zeitstempel außerhalb des Bereichs für Plattform time_t"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "zu viele Argumente mit dem angegebenen Format"
@ -3547,6 +3664,10 @@ msgstr "zu viele Werte zum Auspacken (erwartet %d)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "Tupelindex außerhalb des Bereichs"
@ -3693,6 +3814,14 @@ msgstr "value_count muss größer als 0 sein"
msgid "vectors must have same lengths"
msgstr "Vektoren müssen die selbe Länge haben"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3705,13 +3834,13 @@ msgstr ""
msgid "window must be <= interval"
msgstr "Fenster muss <= Intervall sein"
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "falscher Argumenttyp"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "falscher Indextyp"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3761,6 +3890,49 @@ msgstr ""
msgid "zi must be of shape (n_section, 2)"
msgstr ""
#~ msgid "arctan2 is implemented for scalars and ndarrays only"
#~ msgstr "arctan2 ist nur für Skalare und ndarrays implementiert"
#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "Die Achse muss -1, 0, Keine oder 1 sein"
#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "Die Achse muss -1, 0 oder 1 sein"
#~ msgid "axis must be None, 0, or 1"
#~ msgstr "Die Achse muss None, 0 oder 1 sein"
#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr ""
#~ "Array kann nicht umgeformt werden (inkompatible Eingabe- / Ausgabeform)"
#~ msgid "could not broadast input array from shape"
#~ msgstr "Eingabearray konnte nicht aus der Form übertragen werden"
#~ msgid "ddof must be smaller than length of data set"
#~ msgstr "ddof muss kleiner als die Länge des Datensatzes sein"
#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr "Die Funktion ist nur für Skalare und Ndarrays implementiert"
#~ msgid "n must be between 0, and 9"
#~ msgstr "n muss zwischen 0 und 9 liegen"
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "Die Anzahl der Argumente muss 2 oder 3 sein"
#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "Die rechte Seite muss ein Ndarray oder ein Skalar sein"
#~ msgid "shape must be a 2-tuple"
#~ msgstr "Form muss ein 2-Tupel sein"
#~ msgid "wrong argument type"
#~ msgstr "falscher Argumenttyp"
#~ msgid "wrong index type"
#~ msgstr "falscher Indextyp"
#~ msgid ""
#~ "\n"
#~ "To exit, please reset the board without "

View File

@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: Automatically generated\n"
"Language-Team: none\n"
@ -295,7 +295,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr ""
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -331,6 +333,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -428,6 +431,11 @@ msgstr ""
msgid "Bit clock and word select must share a clock unit"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr ""
@ -489,7 +497,8 @@ msgstr ""
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr ""
@ -835,6 +844,10 @@ msgstr ""
msgid "Expected an Address"
msgstr ""
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -848,6 +861,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -976,6 +993,10 @@ msgstr ""
msgid "I2SOut not available"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -991,6 +1012,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1071,6 +1096,7 @@ msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr ""
@ -1247,6 +1273,10 @@ msgstr ""
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1265,6 +1295,11 @@ msgstr ""
msgid "No DMA channel found"
msgstr ""
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1397,14 +1432,14 @@ msgstr ""
msgid "Only 8 or 16 bit mono with "
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1418,6 +1453,10 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1475,6 +1514,10 @@ msgstr ""
msgid "Pin number already reserved by EXTI"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1536,7 +1579,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr ""
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""
@ -1682,6 +1725,10 @@ msgstr ""
msgid "Supply at least one UART pin"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1745,6 +1792,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1940,7 +1991,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2019,10 +2070,6 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -2031,6 +2078,10 @@ msgstr ""
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr ""
@ -2048,14 +2099,22 @@ msgstr ""
msgid "argument should be a '%q' not a '%q'"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2065,15 +2124,15 @@ msgid "attributes not supported yet"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2277,6 +2336,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
@ -2293,10 +2356,6 @@ msgstr ""
msgid "cannot perform relative import"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr ""
@ -2369,10 +2428,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2381,6 +2436,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2389,10 +2448,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
@ -2422,6 +2477,10 @@ msgstr ""
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2451,6 +2510,10 @@ msgstr ""
msgid "end_x should be an int"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2537,6 +2600,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
@ -2590,8 +2657,8 @@ msgstr ""
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2661,6 +2728,7 @@ msgstr ""
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr ""
@ -2685,6 +2753,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2693,6 +2765,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2705,6 +2781,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr ""
@ -2717,6 +2809,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr ""
@ -2787,6 +2883,10 @@ msgstr ""
msgid "invalid syntax for number"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
@ -2885,6 +2985,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
@ -2934,10 +3038,6 @@ msgstr ""
msgid "must use keyword argument for key function"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""
@ -3020,6 +3120,10 @@ msgstr ""
msgid "non-keyword arg after keyword arg"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
@ -3032,10 +3136,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3088,6 +3188,10 @@ msgstr ""
msgid "odd-length string"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""
@ -3110,6 +3214,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
@ -3200,6 +3312,7 @@ msgstr ""
msgid "pow() with 3 arguments requires integers"
msgstr ""
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3243,6 +3356,10 @@ msgstr ""
msgid "requested length %d but object has length %d"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
@ -3261,8 +3378,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3288,7 +3405,7 @@ msgid "script compilation not supported"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3331,10 +3448,6 @@ msgstr ""
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3415,6 +3528,7 @@ msgstr ""
msgid "time.struct_time() takes a 9-sequence"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3439,6 +3553,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""
@ -3456,6 +3574,10 @@ msgstr ""
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr ""
@ -3598,6 +3720,14 @@ msgstr ""
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3610,12 +3740,12 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c

View File

@ -7,16 +7,16 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-11-01 16:26+0000\n"
"Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-11-27 18:34+0000\n"
"Last-Translator: Iván Montiel Cardona <ivan_montiel2013@hotmail.com>\n"
"Language-Team: \n"
"Language: es\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Weblate 4.3.2-dev\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -303,9 +303,11 @@ msgstr "Todos los periféricos CAN están en uso"
msgid "All I2C peripherals are in use"
msgstr "Todos los periféricos I2C están siendo usados"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
msgstr "Todas las unidades PCNT en uso"
#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/esp32s2/common-hal/canio/Listener.c
@ -341,6 +343,7 @@ msgstr "Todos los timers para este pin están siendo utilizados"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -436,12 +439,17 @@ msgstr "El periférico no maneja el Baudrate"
#: shared-module/displayio/Display.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Below minimum frame rate"
msgstr "Por debajo de taza mínima de refrescamiento"
msgstr "Por debajo de la tasa mínima de refrescamiento"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr "Bit clock y word select deben compartir una unidad de reloj"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr "Bit depth tiene que ser de 1 a 6 inclusivo, no %d"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Bits depth debe ser múltiplo de 8."
@ -492,7 +500,7 @@ msgstr "El buffer es muy pequeño"
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#, c-format
msgid "Buffer length %d too big. It must be less than %d"
msgstr "La longitud del buffer %d es muy grande. Debe ser menor a %d"
msgstr "Longitud del buffer %d es demasiado grande. Tiene que ser menor a %d"
#: ports/atmel-samd/common-hal/sdioio/SDCard.c
#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
@ -503,7 +511,8 @@ msgstr "El tamaño del búfer debe ser múltiplo de 512"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Búfer deber ser un múltiplo de 512 bytes"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Buffer debe ser de longitud 1 como minimo"
@ -514,7 +523,7 @@ msgstr "Buffer demasiado grande e incapaz de asignar"
#: shared-bindings/_bleio/PacketBuffer.c
#, c-format
msgid "Buffer too short by %d bytes"
msgstr "Búfer muy corto por %d bytes"
msgstr "Búffer muy corto por %d bytes"
#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
#: ports/nrf/common-hal/displayio/ParallelBus.c
@ -723,7 +732,7 @@ msgstr "No se puede definir la dirección"
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Could not start PWM"
msgstr "No se pudo iniciar el PWM"
msgstr "No se pudo iniciar PWM"
#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
@ -740,7 +749,7 @@ msgstr "No se pudo asignar el primer buffer"
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate input buffer"
msgstr "No se pudo encontrar el búfer de entrada"
msgstr "No se pudo encontrar el buffer de entrada"
#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
#: shared-module/audiomp3/MP3Decoder.c
@ -855,6 +864,10 @@ msgstr "Se esperaba un UUID"
msgid "Expected an Address"
msgstr "Se esperaba una dirección"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -868,6 +881,10 @@ msgstr "No se admiten anuncios extendidos con respuesta de escaneo."
msgid "FFT is defined for ndarrays only"
msgstr "FFT se define solo para ndarrays"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr "FFT solo esta implementado para arrays lineales"
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr "Fallo en saludo SSL"
@ -926,7 +943,7 @@ msgstr "No se puede liberar el mutex, err 0x%04x"
#: supervisor/shared/safe_mode.c
msgid "Failed to write internal flash."
msgstr "Error al escribir al flash interno."
msgstr "Error al escribir el flash interno."
#: py/moduerrno.c
msgid "File exists"
@ -965,7 +982,7 @@ msgstr "La función requiere lock"
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Group already used"
msgstr "El grupo ya está siendo utilizado"
msgstr "Grupo ya está siendo utilizado"
#: shared-module/displayio/Group.c
msgid "Group full"
@ -991,12 +1008,16 @@ msgstr "Operación I/O en archivo cerrado"
#: ports/stm/common-hal/busio/I2C.c
msgid "I2C Init Error"
msgstr "Error de inicio de I2C"
msgstr "I2C Error de inicio"
#: shared-bindings/audiobusio/I2SOut.c
msgid "I2SOut not available"
msgstr "I2SOut no disponible"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1014,6 +1035,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "Tamaño incorrecto del buffer"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr "Inicializacion fallida por falta de memoria"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "La entrada está durando mucho tiempo"
@ -1094,6 +1119,7 @@ msgid "Invalid byteorder string"
msgstr "Cadena de byteorder inválida"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Inválido periodo de captura. Rango válido: 1 - 500"
@ -1270,6 +1296,10 @@ msgstr "Debe proporcionar un pin MISO o MOSI"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Debe usar un múltiplo de 6 pines rgb, no %d"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr "Error NVS"
#: py/parse.c
msgid "Name too long"
msgstr "Nombre muy largo"
@ -1288,6 +1318,11 @@ msgstr "El chip no tiene DAC"
msgid "No DMA channel found"
msgstr "No se encontró el canal DMA"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1383,7 +1418,7 @@ msgstr "No hay temporizador disponible"
#: supervisor/shared/safe_mode.c
msgid "Nordic Soft Device failure assertion."
msgstr "fallo de aserción de dispositivo Nordic Soft."
msgstr "Fallo de aserción de dispositivo Nordic Soft."
#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
msgid "Not a valid IP string"
@ -1422,14 +1457,14 @@ msgstr "Paridad impar no soportada"
msgid "Only 8 or 16 bit mono with "
msgstr "Solo mono de 8 ó 16 bit con "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr "Solo hay capacidad para enchufes IPv4 SOCK_STREAM"
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Solo hay capacidad para direcciones IPv4"
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr "Solo se admiten sockets IPv4"
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1447,6 +1482,10 @@ msgstr ""
"Solo se admiten BMP monocromáticos, indexados de 4 bpp u 8 bpp y 16 bpp o "
"más: %d bpp proporcionados"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr "Solo un color puede ser transparente a la vez"
@ -1479,7 +1518,7 @@ msgstr ""
#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
#: ports/stm/common-hal/displayio/ParallelBus.c
msgid "ParallelBus not yet supported"
msgstr "ParallelBus no soportado aún"
msgstr "ParallelBus todavía no soportado"
#: py/moduerrno.c
msgid "Permission denied"
@ -1506,6 +1545,10 @@ msgstr "El pin debe admitir interrupciones de hardware"
msgid "Pin number already reserved by EXTI"
msgstr "Número de pin ya reservado por EXTI"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1513,8 +1556,9 @@ msgid ""
"bytes. If this cannot be avoided, pass allow_inefficient=True to the "
"constructor"
msgstr ""
"El pinout utiliza %d bytes por elemento, lo que consume más del ideal de %d "
"bytes. Si esto no se puede evitar, pase allow_inefficient=True al constructor"
"El pinout utiliza %d bytes por elemento, lo que consume más de los %d bytes "
"ideales. Si esto no se puede evitar, pase allow_inefficient=True al "
"constructor"
#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
@ -1545,7 +1589,7 @@ msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "Prefix buffer must be on the heap"
msgstr "El búfer de prefijo debe estar en el montículo"
msgstr "El prefijo del buffer debe estar en el heap"
#: main.c
msgid "Press any key to enter the REPL. Use CTRL-D to reload."
@ -1558,7 +1602,7 @@ msgstr "Pull no se usa cuando la dirección es output."
#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr "Error de desinicializado del RNG"
msgstr "Error de desinicialización de RNG"
#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
@ -1567,14 +1611,14 @@ msgstr "Error de inicialización de RNG"
#: ports/esp32s2/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr "Se especifica inversión de RS485 sin estar en modo RS485"
msgstr "Se especifica inversión de RS485 si no está en modo RS485"
#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
msgid "RTC calibration is not supported on this board"
msgstr "Calibración de RTC no es soportada en esta placa"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "RTC no soportado en esta placa"
@ -1602,7 +1646,7 @@ msgstr "Objeto de solo-lectura"
#: shared-bindings/displayio/EPaperDisplay.c
msgid "Refresh too soon"
msgstr "Actualizando demasiado pronto"
msgstr "Refresco demasiado pronto"
#: shared-bindings/canio/RemoteTransmissionRequest.c
msgid "RemoteTransmissionRequests limited to 8 bytes"
@ -1662,7 +1706,7 @@ msgstr "Frecuencia de muestreo demasiado alta. Debe ser menor a %d"
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Scan already in progess. Stop with stop_scan."
msgstr "Escaneo en progreso. Use stop_scan para detener."
msgstr "Escaneo en progreso. Usa stop_scan para detener."
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Selected CTS pin not valid"
@ -1702,7 +1746,7 @@ msgstr "SocketPool solo se puede usar con wifi.radio"
#: shared-bindings/aesio/aes.c
msgid "Source and destination buffers must be the same length"
msgstr "Los búferes de fuente y destino deben ser del mismo tamaño"
msgstr "Los buffers de fuente y destino deben ser del mismo tamaño"
#: extmod/modure.c
msgid "Splitting with sub-captures"
@ -1720,6 +1764,10 @@ msgstr "A Stream le falta el método readinto() o write()."
msgid "Supply at least one UART pin"
msgstr "Suministre al menos un pin UART"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr "La entrada del sistema debe ser gnss.SatelliteSystem"
@ -1733,7 +1781,7 @@ msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
"Please increase the stack size if you know how, or if not:"
msgstr ""
"El montículo de CircuitPython se dañó porque la pila era demasiado pequeña.\n"
"El heap de CircuitPython se dañó porque la pila era demasiado pequeña.\n"
"Aumente el tamaño de la pila si sabe cómo, o si no:"
#: supervisor/shared/safe_mode.c
@ -1741,8 +1789,8 @@ msgid ""
"The `microcontroller` module was used to boot into safe mode. Press reset to "
"exit safe mode.\n"
msgstr ""
"El módulo de `microcontroller` fue utilizado para bootear en modo seguro. "
"Presione reset para salir del modo seguro.\n"
"El módulo de `microcontroller` fue utilizado para arrancar en modo seguro. "
"Presiona reset para salir del modo seguro.\n"
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
@ -1754,9 +1802,9 @@ msgid ""
"enough power for the whole circuit and press reset (after ejecting "
"CIRCUITPY).\n"
msgstr ""
"La alimentación de la microntroladora bajó. Asegúrate que tu fuente de "
"poder\n"
"pueda suplir suficiente energía para todo el circuito y presione reset "
"La alimentación del microntrolador cayó. Asegúrate que tu fuente de "
"alimentación\n"
"pueda aportar suficiente energía para todo el circuito y presiona reset "
"(luego de\n"
"expulsar CIRCUITPY)\n"
@ -1792,6 +1840,10 @@ msgstr "Valor de mosaico fuera de límites"
msgid "Tile width must exactly divide bitmap width"
msgstr "Ancho del Tile debe dividir exactamente el ancho de mapa de bits"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1936,7 +1988,7 @@ msgstr "Error de seguridad desconocido: 0x%04x"
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown soft device error: %04x"
msgstr "Error suave desconocido en dispositivo: %04x"
msgstr "Error leve desconocido en dispositivo: %04x"
#: shared-bindings/_pixelbuf/PixelBuf.c
#, c-format
@ -1949,7 +2001,7 @@ msgid ""
"declined or ignored."
msgstr ""
"Problema no especificado. Puede ser que la señal de emparejamiento del otro "
"dispositivo fue declinada o ignorada."
"dispositivo fue denegada o ignorada."
#: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
@ -1994,7 +2046,7 @@ msgstr "Tiempo de espera agotado para lectura de voltaje"
msgid "WARNING: Your code filename has two extensions\n"
msgstr "ADVERTENCIA: El nombre de archivo de tu código tiene dos extensiones\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
"WatchDogTimer no se puede desinicializar luego de definirse en modo RESET"
@ -2039,7 +2091,7 @@ msgstr "La clave de WiFi debe ser entre 8 y 63 caracteres"
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Writes not supported on Characteristic"
msgstr "Escrituras no admitidas en la característica"
msgstr "Escrituras no admitidas en Characteristic"
#: supervisor/shared/safe_mode.c
msgid "You are in safe mode: something unanticipated happened.\n"
@ -2082,10 +2134,6 @@ msgstr "address fuera de límites"
msgid "addresses is empty"
msgstr "addresses esta vacío"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr "arctan2 se encuentra implementado solo para escalares y ndarrays"
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "argumento es una secuencia vacía"
@ -2094,6 +2142,10 @@ msgstr "argumento es una secuencia vacía"
msgid "argsort argument must be an ndarray"
msgstr "El argumento para argsort debe ser un ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr "El argot no está implementado para arrays aplanados"
#: py/runtime.c
msgid "argument has wrong type"
msgstr "el argumento tiene un tipo erroneo"
@ -2111,33 +2163,41 @@ msgstr "argumento número/tipos no coinciden"
msgid "argument should be a '%q' not a '%q'"
msgstr "argumento deberia ser un '%q' no un '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "argumentos deben ser ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr "Longitud del array e índice tienen que ser iguales"
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "array/bytes requeridos en el lado derecho"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr "Intendo de obteber (arg)min/(arg)max de secuencia vacía"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr "se trató de traer argmin/argmax de una secuencia vacía"
msgstr "intento de obtener argmin/argmax de una secuencia vacía"
#: py/objstr.c
msgid "attributes not supported yet"
msgstr "atributos aún no soportados"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr "eje debe ser -1, 0, None o 1"
msgid "axis is out of bounds"
msgstr "Eje está fuera de sus límites"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr "eje debe ser -1, 0, o 1"
msgid "axis must be None, or an integer"
msgstr "Eje tiene que ser None, o un entero"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgstr "eje debe ser None, 0, o 1"
msgid "axis too long"
msgstr "Eje demasiado largo"
#: py/builtinevex.c
msgid "bad compile mode"
@ -2345,6 +2405,10 @@ msgstr ""
"no se puede cambiar de especificación de campo manual a numeración "
"automática de campos"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr "No se puede realizar cast de la salida sin una regla de cast"
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "no se pueden crear '%q' instancias"
@ -2361,10 +2425,6 @@ msgstr "no se puede importar name '%q'"
msgid "cannot perform relative import"
msgstr "no se puedo realizar importación relativa"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr "no se puede reformar el arreglo (forma de entrada/salida incompatible)"
#: py/emitnative.c
msgid "casting"
msgstr "convirtiendo tipo"
@ -2383,7 +2443,7 @@ msgstr "El argumento de chr() no esta en el rango(256)"
#: shared-module/vectorio/Circle.c
msgid "circle can only be registered in one parent"
msgstr "circle solo puede ser registrado con un pariente"
msgstr "circulo solo puede ser registrado con un pariente"
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
@ -2437,10 +2497,6 @@ msgstr "los argumentos para convolve deben ser ndarrays"
msgid "convolve arguments must not be empty"
msgstr "los argumentos para convolve no deben estar vacíos"
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr "no se pudo anunciar la matriz de entrada desde la forma"
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "no se pudo invertir la matriz de Vandermonde"
@ -2449,6 +2505,10 @@ msgstr "no se pudo invertir la matriz de Vandermonde"
msgid "couldn't determine SD card version"
msgstr "no se pudo determinar la versión de la tarjeta SD"
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr "Cruce está definido para un array 1D de longitud 3"
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr "los datos deben permitir iteración"
@ -2457,10 +2517,6 @@ msgstr "los datos deben permitir iteración"
msgid "data must be of equal length"
msgstr "los datos deben ser de igual tamaño"
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr "ddof debe ser menor que la longitud del conjunto de datos"
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "números decimales no soportados"
@ -2492,6 +2548,10 @@ msgstr "la secuencia de actualizacion del dict tiene una longitud incorrecta"
msgid "diff argument must be an ndarray"
msgstr "El argumento diff debe ser un ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr "Orden de diferenciación fuera de rango"
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2521,6 +2581,10 @@ msgstr "el final del formato mientras se busca el especificador de conversión"
msgid "end_x should be an int"
msgstr "end_x debe ser un int"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2607,9 +2671,13 @@ msgstr "se debe poder llamar al primer argumento"
msgid "first argument must be a function"
msgstr "el primer argumento debe ser una función"
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr "Primer argumento tiene que ser una tupla de ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "el primer argumento debe permitir iteración"
msgstr "el primer argumento debe ser un iterable"
#: extmod/ulab/code/vector/vectorise.c
msgid "first argument must be an ndarray"
@ -2629,7 +2697,7 @@ msgstr "el argumento invertido debe ser un ndarray"
#: py/objint.c
msgid "float too big"
msgstr "punto flotante muy grande"
msgstr "punto flotante demasiado grande"
#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
@ -2660,9 +2728,9 @@ msgstr "la función tiene múltiples valores para el argumento '%q'"
msgid "function has the same sign at the ends of interval"
msgstr "la función tiene el mismo signo a extremos del intervalo"
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr "la función está implementada solo para escalares y ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr "Función solo definida para ndarrays"
#: py/argcheck.c
#, c-format
@ -2731,6 +2799,7 @@ msgstr "relleno (padding) incorrecto"
msgid "index is out of bounds"
msgstr "el índice está fuera de límites"
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index fuera de rango"
@ -2755,6 +2824,10 @@ msgstr "el tamaño de initial_value es incorrecto"
msgid "inline assembler must be a function"
msgstr "ensamblador en línea debe ser una función"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr "Formas de entrada y salida no son compactibles"
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr "el argumento de entrada debe ser un entero o una tupla de par"
@ -2763,9 +2836,13 @@ msgstr "el argumento de entrada debe ser un entero o una tupla de par"
msgid "input array length must be power of 2"
msgstr "el tamaño del arreglo de entrada debe ser potencia de 2"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr "Arrays de entrada no son compactibles"
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr "los datos de entrada deben permitir iteración"
msgstr "los datos de entrada deben ser iterables"
#: extmod/ulab/code/linalg/linalg.c
msgid "input matrix is asymmetric"
@ -2775,6 +2852,22 @@ msgstr "la matriz de entrada es asimétrica"
msgid "input matrix is singular"
msgstr "la matriz de entrada es singular"
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr "Entrada tiene que ser un ndarray denso"
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr "Entrada tiene que ser un tensor de rango 2"
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr "Entrada tiene que ser un ndarray"
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr "Entrada tiene que ser unidimensional"
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "la entrada debe ser una matriz cuadrada"
@ -2787,6 +2880,10 @@ msgstr "la entrada debe ser una tupla, lista, rango o ndarray"
msgid "input vectors must be of equal length"
msgstr "los vectores de entrada deben ser de igual tamaño"
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr "Entradas no son iterables"
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "int() arg 2 debe ser >= 2 y <= 36"
@ -2857,6 +2954,10 @@ msgstr "sintaxis inválida para entero con base %d"
msgid "invalid syntax for number"
msgstr "sintaxis inválida para número"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass() arg 1 debe ser una clase"
@ -2926,7 +3027,7 @@ msgstr "long int no soportado en esta compilación"
#: ports/esp32s2/common-hal/canio/CAN.c
msgid "loopback + silent mode not supported by peripheral"
msgstr ""
msgstr "Loopback + modo silencioso no están soportados por periférico"
#: py/parse.c
msgid "malformed f-string"
@ -2958,17 +3059,21 @@ msgstr "max_length debe ser 0-%d cuando fixed_length es %s"
msgid "max_length must be > 0"
msgstr "max_lenght debe ser > 0"
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr "Máximo número de dimensiones es 4"
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "profundidad máxima de recursión excedida"
#: extmod/ulab/code/approx/approx.c
msgid "maxiter must be > 0"
msgstr ""
msgstr "maxiter tiene que ser > 0"
#: extmod/ulab/code/approx/approx.c
msgid "maxiter should be > 0"
msgstr ""
msgstr "maxiter debe ser > 0"
#: py/runtime.c
#, c-format
@ -3007,10 +3112,6 @@ msgstr "debe hacer un raise de un objeto"
msgid "must use keyword argument for key function"
msgstr "debe utilizar argumento de palabra clave para la función clave"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr "n debe estar entre 0 y 9"
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "name '%q' no esta definido"
@ -3095,6 +3196,10 @@ msgstr ""
"no deberia estar/tener agumento por palabra clave despues de argumento por "
"palabra clave"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr "norma está definida para arrays 1D y 2D"
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "no es 128-bit UUID"
@ -3108,10 +3213,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr "no suficientes argumentos para format string"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr "el número de argumentos debe ser 2 o 3"
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr "el número de puntos debe ser al menos 2"
@ -3164,6 +3265,10 @@ msgstr "objeto con protocolo de buffer requerido"
msgid "odd-length string"
msgstr "string de longitud impar"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr "offset es demasiado grande"
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "offset fuera de límites"
@ -3186,6 +3291,14 @@ msgstr "solo se admiten segmentos con step=1 (alias None)"
msgid "operands could not be broadcast together"
msgstr "los operandos no se pueden transmitir juntos"
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr "operación solo está implementada para arrays booleanos de 1D"
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr "operación no está implementada para arrays aplanados"
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "la operación no está implementada para ndarrays"
@ -3276,6 +3389,7 @@ msgstr "el 3er argumento de pow() no puede ser 0"
msgid "pow() with 3 arguments requires integers"
msgstr "pow() con 3 argumentos requiere enteros"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3319,6 +3433,10 @@ msgstr "import relativo"
msgid "requested length %d but object has length %d"
msgstr "longitud solicitada %d pero el objeto tiene longitud %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr "resultados no pueden aplicar cast a un tipo específico"
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "la anotación de retorno debe ser un identificador"
@ -3337,9 +3455,9 @@ msgstr "rgb_pins[%d] duplica otra asignación de pin"
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] no está en el mismo puerto que el reloj"
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr "el lado derecho debe ser un ndarray o escalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr "Argumento enrolado tiene que ser un ndarray"
#: py/objstr.c
msgid "rsplit(None,n)"
@ -3366,8 +3484,8 @@ msgid "script compilation not supported"
msgstr "script de compilación no soportado"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr "la forma debe ser una tupla de 2"
msgid "shape must be a tuple"
msgstr "forma tiene que ser una tupla"
#: py/objstr.c
msgid "sign not allowed in string format specifier"
@ -3409,10 +3527,6 @@ msgstr "reinicio suave\n"
msgid "sort argument must be an ndarray"
msgstr "argumento de ordenado debe ser un ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr "el arreglo sos debe de forma (n_section, 6)"
@ -3493,6 +3607,7 @@ msgstr "limite debe ser en el rango 0-65536"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() toma un sequencio 9"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3518,6 +3633,10 @@ msgstr "tiempo de espera agotado esperando a tarjeta v2"
msgid "timestamp out of range for platform time_t"
msgstr "timestamp fuera de rango para plataform time_t"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr "tobytes solo pueden ser invocados por arrays densos"
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "demasiados argumentos provistos con el formato dado"
@ -3535,6 +3654,10 @@ msgstr "demasiados valores para descomprimir (%d esperado)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr "trapz está definido para arreglos 1D de igual tamaño"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "tuple index fuera de rango"
@ -3546,12 +3669,12 @@ msgstr "tupla/lista tiene una longitud incorrecta"
#: ports/esp32s2/common-hal/canio/CAN.c
#, c-format
msgid "twai_driver_install returned esp-idf error #%d"
msgstr ""
msgstr "twai_driver_install devolvió esp-idf error #%d"
#: ports/esp32s2/common-hal/canio/CAN.c
#, c-format
msgid "twai_start returned esp-idf error #%d"
msgstr ""
msgstr "twai_start devolvió esp-idf error #%d"
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
@ -3677,6 +3800,14 @@ msgstr "value_count debe ser > 0"
msgid "vectors must have same lengths"
msgstr "los vectores deben tener el mismo tamaño"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr "watchdog no inicializado"
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr "el tiempo de espera del perro guardián debe ser mayor a 0"
@ -3689,13 +3820,13 @@ msgstr "el ancho debe ser mayor que cero"
msgid "window must be <= interval"
msgstr "la ventana debe ser <= intervalo"
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "tipo de argumento incorrecto"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr "indice de eje erróneo"
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "tipo de índice incorrecto"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr "eje especificado erróneo"
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3745,6 +3876,52 @@ msgstr "zi debe ser de tipo flotante"
msgid "zi must be of shape (n_section, 2)"
msgstr "zi debe ser una forma (n_section,2)"
#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
#~ msgstr "Solo hay capacidad para enchufes IPv4 SOCK_STREAM"
#~ msgid "arctan2 is implemented for scalars and ndarrays only"
#~ msgstr "arctan2 se encuentra implementado solo para escalares y ndarrays"
#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "eje debe ser -1, 0, None o 1"
#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "eje debe ser -1, 0, o 1"
#~ msgid "axis must be None, 0, or 1"
#~ msgstr "eje debe ser None, 0, o 1"
#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr ""
#~ "no se puede reformar el arreglo (forma de entrada/salida incompatible)"
#~ msgid "could not broadast input array from shape"
#~ msgstr "no se pudo anunciar la matriz de entrada desde la forma"
#~ msgid "ddof must be smaller than length of data set"
#~ msgstr "ddof debe ser menor que la longitud del conjunto de datos"
#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr "la función está implementada solo para escalares y ndarrays"
#~ msgid "n must be between 0, and 9"
#~ msgstr "n debe estar entre 0 y 9"
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "el número de argumentos debe ser 2 o 3"
#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "el lado derecho debe ser un ndarray o escalar"
#~ msgid "shape must be a 2-tuple"
#~ msgstr "la forma debe ser una tupla de 2"
#~ msgid "wrong argument type"
#~ msgstr "tipo de argumento incorrecto"
#~ msgid "wrong index type"
#~ msgstr "tipo de índice incorrecto"
#~ msgid "specify size or data, but not both"
#~ msgstr "especifique o tamaño o datos, pero no ambos"

View File

@ -5,7 +5,7 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2018-12-20 22:15-0800\n"
"Last-Translator: Timothy <me@timothygarcia.ca>\n"
"Language-Team: fil\n"
@ -297,7 +297,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr "Lahat ng I2C peripherals ginagamit"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -334,6 +336,7 @@ msgstr "Lahat ng timers para sa pin na ito ay ginagamit"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -433,6 +436,11 @@ msgstr ""
msgid "Bit clock and word select must share a clock unit"
msgstr "Ang bit clock at word select dapat makibahagi sa isang clock unit"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Bit depth ay dapat multiple ng 8."
@ -494,7 +502,8 @@ msgstr ""
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Buffer dapat ay hindi baba sa 1 na haba"
@ -848,6 +857,10 @@ msgstr "Umasa ng %q"
msgid "Expected an Address"
msgstr ""
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -861,6 +874,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -989,6 +1006,10 @@ msgstr ""
msgid "I2SOut not available"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1006,6 +1027,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1086,6 +1111,7 @@ msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr ""
@ -1262,6 +1288,10 @@ msgstr ""
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1280,6 +1310,11 @@ msgstr "Walang DAC sa chip"
msgid "No DMA channel found"
msgstr "Walang DMA channel na mahanap"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1415,14 +1450,14 @@ msgstr "Odd na parity ay hindi supportado"
msgid "Only 8 or 16 bit mono with "
msgstr "Tanging 8 o 16 na bit mono na may "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1436,6 +1471,10 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1494,6 +1533,10 @@ msgstr ""
msgid "Pin number already reserved by EXTI"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1557,7 +1600,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr "RTC calibration ay hindi supportado ng board na ito"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "Hindi supportado ang RTC sa board na ito"
@ -1704,6 +1747,10 @@ msgstr "Stream kulang ng readinto() o write() method."
msgid "Supply at least one UART pin"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1767,6 +1814,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1966,7 +2017,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr "BABALA: Ang pangalan ng file ay may dalawang extension\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2051,10 +2102,6 @@ msgstr "wala sa sakop ang address"
msgid "addresses is empty"
msgstr "walang laman ang address"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "arg ay walang laman na sequence"
@ -2063,6 +2110,10 @@ msgstr "arg ay walang laman na sequence"
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr "may maling type ang argument"
@ -2080,14 +2131,22 @@ msgstr "hindi tugma ang argument num/types"
msgid "argument should be a '%q' not a '%q'"
msgstr "argument ay dapat na '%q' hindi '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "array/bytes kinakailangan sa kanang bahagi"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2097,15 +2156,15 @@ msgid "attributes not supported yet"
msgstr "attributes hindi sinusuportahan"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2316,6 +2375,10 @@ msgstr ""
"hindi mapalitan ang manual field specification sa awtomatikong field "
"numbering"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "hindi magawa '%q' instances"
@ -2332,10 +2395,6 @@ msgstr "hindi ma-import ang name %q"
msgid "cannot perform relative import"
msgstr "hindi maaring isagawa ang relative import"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr "casting"
@ -2408,10 +2467,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2420,6 +2475,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2428,10 +2487,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "decimal numbers hindi sinusuportahan"
@ -2465,6 +2520,10 @@ msgstr "may mali sa haba ng dict update sequence"
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2495,6 +2554,10 @@ msgstr "sa huli ng format habang naghahanap sa conversion specifier"
msgid "end_x should be an int"
msgstr "y ay dapat int"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2581,6 +2644,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
@ -2634,8 +2701,8 @@ msgstr "ang function ay nakakuha ng maraming values para sa argument '%q'"
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2706,6 +2773,7 @@ msgstr "mali ang padding"
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index wala sa sakop"
@ -2730,6 +2798,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr "inline assembler ay dapat na function"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2738,6 +2810,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2750,6 +2826,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr ""
@ -2762,6 +2854,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "int() arg 2 ay dapat >=2 at <= 36"
@ -2832,6 +2928,10 @@ msgstr "maling sintaks sa integer na may base %d"
msgid "invalid syntax for number"
msgstr "maling sintaks sa number"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass() arg 1 ay dapat na class"
@ -2934,6 +3034,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "lumagpas ang maximum recursion depth"
@ -2983,10 +3087,6 @@ msgstr "dapat itaas ang isang object"
msgid "must use keyword argument for key function"
msgstr "dapat gumamit ng keyword argument para sa key function"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "name '%q' ay hindi defined"
@ -3069,6 +3169,10 @@ msgstr "non-keyword arg sa huli ng */**"
msgid "non-keyword arg after keyword arg"
msgstr "non-keyword arg sa huli ng keyword arg"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
@ -3081,10 +3185,6 @@ msgstr "hindi lahat ng arguments na i-convert habang string formatting"
msgid "not enough arguments for format string"
msgstr "kulang sa arguments para sa format string"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3137,6 +3237,10 @@ msgstr "object na may buffer protocol kinakailangan"
msgid "odd-length string"
msgstr "odd-length string"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
#, fuzzy
msgid "offset out of bounds"
@ -3160,6 +3264,14 @@ msgstr "ang mga slices lamang na may hakbang = 1 (aka None) ang sinusuportahan"
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
@ -3251,6 +3363,7 @@ msgstr "pow() 3rd argument ay hindi maaring 0"
msgid "pow() with 3 arguments requires integers"
msgstr "pow() na may 3 argumento kailangan ng integers"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3294,6 +3407,10 @@ msgstr "relative import"
msgid "requested length %d but object has length %d"
msgstr "hiniling ang haba %d ngunit may haba ang object na %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "return annotation ay dapat na identifier"
@ -3312,8 +3429,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3341,7 +3458,7 @@ msgid "script compilation not supported"
msgstr "script kompilasyon hindi supportado"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3384,10 +3501,6 @@ msgstr "malambot na reboot\n"
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3469,6 +3582,7 @@ msgstr "ang threshold ay dapat sa range 0-65536"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() kumukuha ng 9-sequence"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3494,6 +3608,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr "wala sa sakop ng timestamp ang platform time_t"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "masyadong maraming mga argumento na ibinigay sa ibinigay na format"
@ -3511,6 +3629,10 @@ msgstr "masyadong maraming values para i-unpact (umaasa ng %d)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "indeks ng tuple wala sa sakop"
@ -3653,6 +3775,14 @@ msgstr ""
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3665,12 +3795,12 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c

View File

@ -7,15 +7,15 @@ msgid ""
msgstr ""
"Project-Id-Version: 0.1\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-10-22 20:48+0000\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-11-24 22:45+0000\n"
"Last-Translator: Antonin ENFRUN <antonin.e@me.com>\n"
"Language: fr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n > 1;\n"
"X-Generator: Weblate 4.3.1\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -298,15 +298,17 @@ msgstr "Type d'adresse hors plage"
#: ports/esp32s2/common-hal/canio/CAN.c
msgid "All CAN peripherals are in use"
msgstr ""
msgstr "Tous les périphériques CAN sont utilisés"
#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
msgstr "Tous les périphériques I2C sont utilisés"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
msgstr "Toutes les unités PCNT sont utilisées"
#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/esp32s2/common-hal/canio/Listener.c
@ -340,6 +342,7 @@ msgstr "Tous les timers pour cette broche sont utilisés"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -431,7 +434,7 @@ msgstr ""
#: ports/esp32s2/common-hal/canio/CAN.c
msgid "Baudrate not supported by peripheral"
msgstr ""
msgstr "Baudrate non prise en charge par le périphérique"
#: shared-module/displayio/Display.c
#: shared-module/framebufferio/FramebufferDisplay.c
@ -442,6 +445,11 @@ msgstr "Inférieur à la fréquence d'images minimale"
msgid "Bit clock and word select must share a clock unit"
msgstr "'bit clock' et 'word select' doivent partager une horloge"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr "Bit depth doit être compris entre 1 et 6 inclus, et non %d"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "La profondeur de bit doit être un multiple de 8."
@ -503,7 +511,8 @@ msgstr "La longueur de la mémoire tampon doit être un multiple de 512"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "La mémoire tampon doit être un multiple de 512"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Le tampon doit être de longueur au moins 1"
@ -859,6 +868,10 @@ msgstr "Un UUID est attendu"
msgid "Expected an Address"
msgstr "Attendu une adresse"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -873,6 +886,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr "La FFT est définie pour les ndarrays uniquement"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr "FFT n'est implémenté que pour les tableaux linéaires"
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr "Échec du handshake SSL"
@ -1002,6 +1019,10 @@ msgstr "Erreur d'initialisation I2C"
msgid "I2SOut not available"
msgstr "I2SOut n'est pas disponible"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1019,6 +1040,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "Taille de tampon incorrecte"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr "L'initialisation a échoué par manque de mémoire"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "L'entrée prend trop de temps"
@ -1099,6 +1124,7 @@ msgid "Invalid byteorder string"
msgstr "Chaîne d'octets non valide"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Période de capture invalide. Gamme valide : 1 à 500"
@ -1275,6 +1301,10 @@ msgstr "Doit fournir une broche MISO ou MOSI"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Doit utiliser un multiple de 6 broches RVB, pas %d"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr "Nom trop long"
@ -1293,6 +1323,11 @@ msgstr "Pas de DAC sur la puce"
msgid "No DMA channel found"
msgstr "Aucun canal DMA trouvé"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1427,14 +1462,14 @@ msgstr "Parité impaire non supportée"
msgid "Only 8 or 16 bit mono with "
msgstr "Uniquement 8 ou 16 bit mono avec "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr "Seules les sockets IPv4 SOCK_STREAM sont prises en charge"
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Seules les adresses IPv4 sont prises en charge"
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1452,6 +1487,10 @@ msgstr ""
"Prise en charge uniquement des monochromes, 4 bpp ou 8 bpp indexés et 16 bpp "
"ou plus : %d bpp fournis"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr "Une seule couleur peut être transparente à la fois"
@ -1513,6 +1552,10 @@ msgstr "La broche doit prendre en charge les interruptions matérielles"
msgid "Pin number already reserved by EXTI"
msgstr "Numéro de broche déjà réservé par EXTI"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1581,7 +1624,7 @@ msgstr "Inversion RS485 spécifiée lorsqu'elle n'est pas en mode RS485"
msgid "RTC calibration is not supported on this board"
msgstr "étalonnage de la RTC non supportée sur cette carte"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "RTC non supportée sur cette carte"
@ -1727,6 +1770,10 @@ msgstr "Il manque une méthode readinto() ou write() au flux."
msgid "Supply at least one UART pin"
msgstr "Fournissez au moins une broche UART"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr "L'entrée du système doit être gnss.SatelliteSystem"
@ -1799,6 +1846,10 @@ msgstr "Valeur de tuile hors limites"
msgid "Tile width must exactly divide bitmap width"
msgstr "La largeur de la tuile doit diviser exactement la largeur de l'image"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -2004,7 +2055,7 @@ msgstr "La lecture de la tension a expiré"
msgid "WARNING: Your code filename has two extensions\n"
msgstr "ATTENTION : le nom de fichier de votre code a deux extensions\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
"WatchDogTimer ne peut pas être désinitialisé une fois que le mode est réglé "
@ -2092,10 +2143,6 @@ msgstr "adresse hors limites"
msgid "addresses is empty"
msgstr "adresses vides"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr "arctan2 est implémenté uniquement pour les scalaires et les ndarrays"
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "l'argument est une séquence vide"
@ -2104,6 +2151,10 @@ msgstr "l'argument est une séquence vide"
msgid "argsort argument must be an ndarray"
msgstr "L'argument argsort doit être un ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr "argsort n'est pas mis en œuvre pour les tableaux aplatis"
#: py/runtime.c
msgid "argument has wrong type"
msgstr "l'argument est d'un mauvais type"
@ -2121,14 +2172,22 @@ msgstr "argument num/types ne correspond pas"
msgid "argument should be a '%q' not a '%q'"
msgstr "l'argument devrait être un(e) '%q', pas '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "les arguments doivent être des ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr "la longueur du tableau et de l'index doit être égale"
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "tableau/octets requis à droite"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr "tentative dobtenir (arg)min/(arg)max d'une séquence vide"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr "tenter d'obtenir argmin / argmax d'une séquence vide"
@ -2138,16 +2197,16 @@ msgid "attributes not supported yet"
msgstr "attribut pas encore supporté"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr "l'axe doit être -1, 0, None ou 1"
msgid "axis is out of bounds"
msgstr "axis est hors limites"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr "l'axe doit être -1, 0 ou 1"
msgid "axis must be None, or an integer"
msgstr "axis doit être None ou un entier"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgstr "l'axe doit être None, 0 ou 1"
msgid "axis too long"
msgstr "axis trop long"
#: py/builtinevex.c
msgid "bad compile mode"
@ -2359,6 +2418,10 @@ msgstr ""
"impossible de passer d'une spécification manuelle des champs à une "
"énumération auto"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "ne peut pas créer une instance de '%q'"
@ -2375,11 +2438,6 @@ msgstr "ne peut pas importer le nom %q"
msgid "cannot perform relative import"
msgstr "ne peut pas réaliser un import relatif"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
"ne peut pas remodeler le tableau (forme d'entrée / sortie incompatible)"
#: py/emitnative.c
msgid "casting"
msgstr "typage"
@ -2454,10 +2512,6 @@ msgstr "les arguments convolve doivent être des ndarrays"
msgid "convolve arguments must not be empty"
msgstr "les arguments convolve ne doivent pas être vides"
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr "n'a pas pu diffuser le tableau d'entrée à partir de la forme"
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "n'a pas pu inverser la matrice Vandermonde"
@ -2466,6 +2520,10 @@ msgstr "n'a pas pu inverser la matrice Vandermonde"
msgid "couldn't determine SD card version"
msgstr "impossible de déterminer la version de la carte SD"
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr "cross est défini pour les tableaux 1D de longueur 3"
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr "les données doivent être les objets iterables"
@ -2474,10 +2532,6 @@ msgstr "les données doivent être les objets iterables"
msgid "data must be of equal length"
msgstr "les données doivent être de longueur égale"
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr "ddof doit être inférieur à la longueur de l'ensemble de données"
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "nombres décimaux non supportés"
@ -2509,6 +2563,10 @@ msgstr "la séquence de mise à jour de dict a une mauvaise longueur"
msgid "diff argument must be an ndarray"
msgstr "l'argument diff doit être un ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr "differentiation order hors plage"
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2538,6 +2596,10 @@ msgstr "fin de format en cherchant une spécification de conversion"
msgid "end_x should be an int"
msgstr "end_x doit être un entier 'int'"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2626,6 +2688,10 @@ msgstr "le premier argument doit être un appelable"
msgid "first argument must be a function"
msgstr "le premier argument doit être une fonction"
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr "le premier argument doit être un tuple de ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "le premier argument doit être un itérable"
@ -2679,10 +2745,9 @@ msgstr "la fonction a reçu plusieurs valeurs pour l'argument '%q'"
msgid "function has the same sign at the ends of interval"
msgstr "la fonction a le même signe aux extrémités de lintervalle"
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr ""
"la fonction est implémentée pour les scalaires et les ndarrays uniquement"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr "La fonction n'est définie que pour les ndarrays"
#: py/argcheck.c
#, c-format
@ -2751,6 +2816,7 @@ msgstr "espacement incorrect"
msgid "index is out of bounds"
msgstr "l'index est hors limites"
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index hors gamme"
@ -2776,6 +2842,10 @@ msgstr "la longueur de initial_value est incorrecte"
msgid "inline assembler must be a function"
msgstr "l'assembleur doit être une fonction"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr "les formes d'entrée et de sortie ne sont pas compatibles"
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr "l'argument d'entrée doit être un entier ou un tuple 2"
@ -2784,6 +2854,10 @@ msgstr "l'argument d'entrée doit être un entier ou un tuple 2"
msgid "input array length must be power of 2"
msgstr "la longueur du tableau d'entrée doit être une puissance de 2"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr "les tableaux d'entrée ne sont pas compatibles"
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr "les données d'entrée doivent être un itérable"
@ -2796,6 +2870,22 @@ msgstr "la matrice d'entrée est asymétrique"
msgid "input matrix is singular"
msgstr "la matrice d'entrée est singulière"
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr "l'entrée doit être un tableau dense"
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr "l'entrée doit être un tenseur de rang 2"
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "l'entrée doit être une matrice carrée"
@ -2808,6 +2898,10 @@ msgstr "l'entrée doit être tuple, list, range ou ndarray"
msgid "input vectors must be of equal length"
msgstr "les vecteurs d'entrée doivent être de longueur égale"
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "l'argument 2 de int() doit être >=2 et <=36"
@ -2878,6 +2972,10 @@ msgstr "syntaxe invalide pour un entier de base %d"
msgid "invalid syntax for number"
msgstr "syntaxe invalide pour un nombre"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "l'argument 1 de issubclass() doit être une classe"
@ -2948,7 +3046,7 @@ msgstr "entiers longs non supportés dans cette build"
#: ports/esp32s2/common-hal/canio/CAN.c
msgid "loopback + silent mode not supported by peripheral"
msgstr ""
msgstr "loopback + silent mode non pris en charge par le périphérique"
#: py/parse.c
msgid "malformed f-string"
@ -2980,17 +3078,21 @@ msgstr "max_length doit être 0-%d lorsque fixed_length est %s"
msgid "max_length must be > 0"
msgstr "max_length doit être > 0"
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "profondeur maximale de récursivité dépassée"
#: extmod/ulab/code/approx/approx.c
msgid "maxiter must be > 0"
msgstr ""
msgstr "maxiter doit être > 0"
#: extmod/ulab/code/approx/approx.c
msgid "maxiter should be > 0"
msgstr ""
msgstr "maxiter devrait être > 0"
#: py/runtime.c
#, c-format
@ -3029,10 +3131,6 @@ msgstr "doit lever un objet"
msgid "must use keyword argument for key function"
msgstr "doit utiliser un argument nommé pour une fonction key"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr "n doit être compris entre 0 et 9"
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "nom '%q' non défini"
@ -3116,6 +3214,10 @@ msgstr "argument non-nommé après */**"
msgid "non-keyword arg after keyword arg"
msgstr "argument non-nommé après argument nommé"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "n'est pas un UUID 128 bits"
@ -3129,10 +3231,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr "pas assez d'arguments pour la chaîne de format"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr "le nombre d'arguments doit être 2 ou 3"
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr "le nombre de points doit être d'au moins 2"
@ -3185,6 +3283,10 @@ msgstr "un objet avec un protocole de tampon est nécessaire"
msgid "odd-length string"
msgstr "chaîne de longueur impaire"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "décalage hors limites"
@ -3207,6 +3309,14 @@ msgstr "seules les tranches avec 'step=1' (cad None) sont supportées"
msgid "operands could not be broadcast together"
msgstr "les opérandes ne pouvaient pas être diffusés ensemble"
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "l'opération n'est pas implémentée sur les ndarrays"
@ -3300,6 +3410,7 @@ msgstr "le 3e argument de pow() ne peut être 0"
msgid "pow() with 3 arguments requires integers"
msgstr "pow() avec 3 arguments nécessite des entiers"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3343,6 +3454,10 @@ msgstr "import relatif"
msgid "requested length %d but object has length %d"
msgstr "la longueur requise est %d mais l'objet est long de %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "l'annotation de return doit être un identifiant"
@ -3361,9 +3476,9 @@ msgstr "rgb_pins[%d] duplique une autre affectation de broches"
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] n'est pas sur le même port que l'horloge"
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr "le côté droit doit être un ndarray ou un scalaire"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
msgid "rsplit(None,n)"
@ -3390,8 +3505,8 @@ msgid "script compilation not supported"
msgstr "compilation de script non supportée"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr "la forme doit être un tuple 2"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
msgid "sign not allowed in string format specifier"
@ -3433,10 +3548,6 @@ msgstr "redémarrage logiciel\n"
msgid "sort argument must be an ndarray"
msgstr "l'argument de «sort» doit être un ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr "le tableau sos doit être de forme (n_section, 6)"
@ -3518,6 +3629,7 @@ msgstr "le seuil doit être dans la gamme 0-65536"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() prend une séquence de longueur 9"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr "le délai d'expiration a dépassé la valeur maximale prise en charge"
@ -3542,6 +3654,10 @@ msgstr "Délai dexpiration dépassé en attendant une carte v2"
msgid "timestamp out of range for platform time_t"
msgstr "'timestamp' hors bornes pour 'time_t' de la plateforme"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "trop d'arguments fournis avec ce format"
@ -3559,6 +3675,10 @@ msgstr "trop de valeur à dégrouper (%d attendues)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr "trapz n'est défini que pour des tableaux 1D de longueur égale"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "index du tuple hors gamme"
@ -3570,12 +3690,12 @@ msgstr "tuple/liste a une mauvaise longueur"
#: ports/esp32s2/common-hal/canio/CAN.c
#, c-format
msgid "twai_driver_install returned esp-idf error #%d"
msgstr ""
msgstr "twai_driver_install a renvoyé l'erreur esp-idf #%d"
#: ports/esp32s2/common-hal/canio/CAN.c
#, c-format
msgid "twai_start returned esp-idf error #%d"
msgstr ""
msgstr "twai_start a renvoyé l'erreur esp-idf #%d"
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
@ -3701,6 +3821,14 @@ msgstr "'value_count' doit être > 0"
msgid "vectors must have same lengths"
msgstr "les vecteurs doivent avoir la même longueur"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr "chien de garde non initialisé"
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr "watchdog timeout doit être supérieur à 0"
@ -3713,13 +3841,13 @@ msgstr "width doit être plus grand que zero"
msgid "window must be <= interval"
msgstr "la fenêtre doit être <= intervalle"
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "type d'argument incorrect"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "type d'index incorrect"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3769,6 +3897,57 @@ msgstr "zi doit être de type float"
msgid "zi must be of shape (n_section, 2)"
msgstr "zi doit être de forme (n_section, 2)"
#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
#~ msgstr "Seules les sockets IPv4 SOCK_STREAM sont prises en charge"
#~ msgid "arctan2 is implemented for scalars and ndarrays only"
#~ msgstr ""
#~ "arctan2 est implémenté uniquement pour les scalaires et les ndarrays"
#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "l'axe doit être -1, 0, None ou 1"
#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "l'axe doit être -1, 0 ou 1"
#~ msgid "axis must be None, 0, or 1"
#~ msgstr "l'axe doit être None, 0 ou 1"
#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr ""
#~ "ne peut pas remodeler le tableau (forme d'entrée / sortie incompatible)"
#~ msgid "could not broadast input array from shape"
#~ msgstr "n'a pas pu diffuser le tableau d'entrée à partir de la forme"
#~ msgid "ddof must be smaller than length of data set"
#~ msgstr "ddof doit être inférieur à la longueur de l'ensemble de données"
#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr ""
#~ "la fonction est implémentée pour les scalaires et les ndarrays uniquement"
#~ msgid "n must be between 0, and 9"
#~ msgstr "n doit être compris entre 0 et 9"
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "le nombre d'arguments doit être 2 ou 3"
#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "le côté droit doit être un ndarray ou un scalaire"
#~ msgid "shape must be a 2-tuple"
#~ msgstr "la forme doit être un tuple 2"
#~ msgid "sorted axis can't be longer than 65535"
#~ msgstr "sorted axis ne peut pas dépasser 65535"
#~ msgid "wrong argument type"
#~ msgstr "type d'argument incorrect"
#~ msgid "wrong index type"
#~ msgstr "type d'index incorrect"
#~ msgid "Must provide SCK pin"
#~ msgstr "Vous devez fournir un code PIN SCK"

View File

@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: Automatically generated\n"
"Language-Team: none\n"
@ -295,7 +295,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr ""
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -331,6 +333,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -428,6 +431,11 @@ msgstr ""
msgid "Bit clock and word select must share a clock unit"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr ""
@ -489,7 +497,8 @@ msgstr ""
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr ""
@ -835,6 +844,10 @@ msgstr ""
msgid "Expected an Address"
msgstr ""
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -848,6 +861,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -976,6 +993,10 @@ msgstr ""
msgid "I2SOut not available"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -991,6 +1012,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1071,6 +1096,7 @@ msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr ""
@ -1247,6 +1273,10 @@ msgstr ""
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1265,6 +1295,11 @@ msgstr ""
msgid "No DMA channel found"
msgstr ""
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1397,14 +1432,14 @@ msgstr ""
msgid "Only 8 or 16 bit mono with "
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1418,6 +1453,10 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1475,6 +1514,10 @@ msgstr ""
msgid "Pin number already reserved by EXTI"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1536,7 +1579,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr ""
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""
@ -1682,6 +1725,10 @@ msgstr ""
msgid "Supply at least one UART pin"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1745,6 +1792,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1940,7 +1991,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2019,10 +2070,6 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -2031,6 +2078,10 @@ msgstr ""
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr ""
@ -2048,14 +2099,22 @@ msgstr ""
msgid "argument should be a '%q' not a '%q'"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2065,15 +2124,15 @@ msgid "attributes not supported yet"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2277,6 +2336,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
@ -2293,10 +2356,6 @@ msgstr ""
msgid "cannot perform relative import"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr ""
@ -2369,10 +2428,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2381,6 +2436,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2389,10 +2448,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
@ -2422,6 +2477,10 @@ msgstr ""
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2451,6 +2510,10 @@ msgstr ""
msgid "end_x should be an int"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2537,6 +2600,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
@ -2590,8 +2657,8 @@ msgstr ""
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2661,6 +2728,7 @@ msgstr ""
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr ""
@ -2685,6 +2753,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2693,6 +2765,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2705,6 +2781,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr ""
@ -2717,6 +2809,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr ""
@ -2787,6 +2883,10 @@ msgstr ""
msgid "invalid syntax for number"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
@ -2885,6 +2985,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
@ -2934,10 +3038,6 @@ msgstr ""
msgid "must use keyword argument for key function"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""
@ -3020,6 +3120,10 @@ msgstr ""
msgid "non-keyword arg after keyword arg"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
@ -3032,10 +3136,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3088,6 +3188,10 @@ msgstr ""
msgid "odd-length string"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""
@ -3110,6 +3214,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
@ -3200,6 +3312,7 @@ msgstr ""
msgid "pow() with 3 arguments requires integers"
msgstr ""
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3243,6 +3356,10 @@ msgstr ""
msgid "requested length %d but object has length %d"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
@ -3261,8 +3378,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3288,7 +3405,7 @@ msgid "script compilation not supported"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3331,10 +3448,6 @@ msgstr ""
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3415,6 +3528,7 @@ msgstr ""
msgid "time.struct_time() takes a 9-sequence"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3439,6 +3553,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""
@ -3456,6 +3574,10 @@ msgstr ""
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr ""
@ -3598,6 +3720,14 @@ msgstr ""
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3610,12 +3740,12 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c

View File

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2018-10-02 16:27+0200\n"
"Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
"Language-Team: \n"
@ -296,7 +296,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr "Tutte le periferiche I2C sono in uso"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -333,6 +335,7 @@ msgstr "Tutti i timer per questo pin sono in uso"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -433,6 +436,11 @@ msgid "Bit clock and word select must share a clock unit"
msgstr ""
"Clock di bit e selezione parola devono condividere la stessa unità di clock"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "La profondità di bit deve essere multipla di 8."
@ -494,7 +502,8 @@ msgstr ""
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Il buffer deve essere lungo almeno 1"
@ -848,6 +857,10 @@ msgstr "Atteso un %q"
msgid "Expected an Address"
msgstr ""
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -861,6 +874,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -989,6 +1006,10 @@ msgstr ""
msgid "I2SOut not available"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1006,6 +1027,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1087,6 +1112,7 @@ msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "periodo di cattura invalido. Zona valida: 1 - 500"
@ -1266,6 +1292,10 @@ msgstr ""
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1284,6 +1314,11 @@ msgstr "Nessun DAC sul chip"
msgid "No DMA channel found"
msgstr "Nessun canale DMA trovato"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1420,14 +1455,14 @@ msgstr "operazione I2C non supportata"
msgid "Only 8 or 16 bit mono with "
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1441,6 +1476,10 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1503,6 +1542,10 @@ msgstr ""
msgid "Pin number already reserved by EXTI"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1566,7 +1609,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr "calibrazione RTC non supportata su questa scheda"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "RTC non supportato su questa scheda"
@ -1715,6 +1758,10 @@ msgstr "Metodi mancanti readinto() o write() allo stream."
msgid "Supply at least one UART pin"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1778,6 +1825,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1975,7 +2026,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr "ATTENZIONE: Il nome del sorgente ha due estensioni\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2054,10 +2105,6 @@ msgstr "indirizzo fuori limite"
msgid "addresses is empty"
msgstr "gli indirizzi sono vuoti"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "l'argomento è una sequenza vuota"
@ -2066,6 +2113,10 @@ msgstr "l'argomento è una sequenza vuota"
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr "il tipo dell'argomento è errato"
@ -2083,14 +2134,22 @@ msgstr "discrepanza di numero/tipo di argomenti"
msgid "argument should be a '%q' not a '%q'"
msgstr "l'argomento dovrebbe essere un '%q' e non un '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2100,15 +2159,15 @@ msgid "attributes not supported yet"
msgstr "attributi non ancora supportati"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2316,6 +2375,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "creare '%q' istanze"
@ -2332,10 +2395,6 @@ msgstr "impossibile imporate il nome %q"
msgid "cannot perform relative import"
msgstr "impossibile effettuare l'importazione relativa"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr "casting"
@ -2410,10 +2469,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2422,6 +2477,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2430,10 +2489,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "numeri decimali non supportati"
@ -2466,6 +2521,10 @@ msgstr "sequanza di aggiornamento del dizionario ha la lunghezza errata"
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2496,6 +2555,10 @@ msgstr ""
msgid "end_x should be an int"
msgstr "y dovrebbe essere un int"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2582,6 +2645,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
@ -2635,8 +2702,8 @@ msgstr "la funzione ha ricevuto valori multipli per l'argomento '%q'"
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2707,6 +2774,7 @@ msgstr "padding incorretto"
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "indice fuori intervallo"
@ -2731,6 +2799,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr "inline assembler deve essere una funzione"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2739,6 +2811,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2751,6 +2827,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr ""
@ -2763,6 +2855,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "il secondo argomanto di int() deve essere >= 2 e <= 36"
@ -2833,6 +2929,10 @@ msgstr "sintassi invalida per l'intero con base %d"
msgid "invalid syntax for number"
msgstr "sintassi invalida per il numero"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "il primo argomento di issubclass() deve essere una classe"
@ -2936,6 +3036,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "profondità massima di ricorsione superata"
@ -2985,10 +3089,6 @@ msgstr "deve lanciare un oggetto"
msgid "must use keyword argument for key function"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "nome '%q'non definito"
@ -3072,6 +3172,10 @@ msgstr "argomento non nominato dopo */**"
msgid "non-keyword arg after keyword arg"
msgstr "argomento non nominato seguito da argomento nominato"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
@ -3086,10 +3190,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr "argomenti non sufficienti per la stringa di formattazione"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3142,6 +3242,10 @@ msgstr ""
msgid "odd-length string"
msgstr "stringa di lunghezza dispari"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
#, fuzzy
msgid "offset out of bounds"
@ -3165,6 +3269,14 @@ msgstr "solo slice con step=1 (aka None) sono supportate"
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
@ -3258,6 +3370,7 @@ msgstr "il terzo argomento di pow() non può essere 0"
msgid "pow() with 3 arguments requires integers"
msgstr "pow() con 3 argomenti richiede interi"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3301,6 +3414,10 @@ msgstr "importazione relativa"
msgid "requested length %d but object has length %d"
msgstr "lunghezza %d richiesta ma l'oggetto ha lunghezza %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
@ -3319,8 +3436,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3348,7 +3465,7 @@ msgid "script compilation not supported"
msgstr "compilazione dello scrip non suportata"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3391,10 +3508,6 @@ msgstr "soft reboot\n"
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3476,6 +3589,7 @@ msgstr "la soglia deve essere nell'intervallo 0-65536"
msgid "time.struct_time() takes a 9-sequence"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3501,6 +3615,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr "timestamp è fuori intervallo per il time_t della piattaforma"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "troppi argomenti forniti con il formato specificato"
@ -3518,6 +3636,10 @@ msgstr "troppi valori da scompattare (%d attesi)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "indice della tupla fuori intervallo"
@ -3660,6 +3782,14 @@ msgstr ""
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3672,12 +3802,12 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c

View File

@ -7,8 +7,8 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-11-06 20:29+0000\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-11-27 18:34+0000\n"
"Last-Translator: sporeball <sporeballdev@gmail.com>\n"
"Language-Team: none\n"
"Language: ja\n"
@ -16,7 +16,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 4.3.2\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -182,7 +182,7 @@ msgstr ""
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr ""
msgstr "'%s' には整数が必要"
#: py/emitinlinethumb.c
#, c-format
@ -302,7 +302,9 @@ msgstr "全てのCAN周辺機器が使用中"
msgid "All I2C peripherals are in use"
msgstr "全てのI2C周辺機器が使用中"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -338,6 +340,7 @@ msgstr "このピン用の全てのタイマが使用中"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -437,6 +440,11 @@ msgstr "最低のフレームレート未満"
msgid "Bit clock and word select must share a clock unit"
msgstr "bit clockとword selectはクロックユニットを共有しなければなりません"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "ビット深度は8の倍数でなければなりません"
@ -498,7 +506,8 @@ msgstr "バッファ長は512の倍数でなければなりません"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "バッファは512の倍数でなければなりません"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "バッファ長は少なくとも1以上でなければなりません"
@ -848,6 +857,10 @@ msgstr "UUIDが必要"
msgid "Expected an Address"
msgstr "Addressが必要"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -861,6 +874,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr "FFTはndarrayでのみ使えます"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -989,6 +1006,10 @@ msgstr "I2C初期化エラー"
msgid "I2SOut not available"
msgstr "I2SOutが利用できません"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1006,6 +1027,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "バッファサイズが正しくありません"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1086,6 +1111,7 @@ msgid "Invalid byteorder string"
msgstr "不正なバイトオーダー文字列"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "不正なキャプチャ周期。有効な周期は1-500"
@ -1262,6 +1288,10 @@ msgstr "MISOピンまたはMOSIピンが必要"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "%d個でなく6の倍数個のrgbピンを使ってください"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr "名前が長すぎます"
@ -1280,6 +1310,11 @@ msgstr "チップにDACがありません"
msgid "No DMA channel found"
msgstr "DMAチャネルが見つかりません"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1414,14 +1449,14 @@ msgstr "奇数パリティには対応していません"
msgid "Only 8 or 16 bit mono with "
msgstr "8または16ビットの "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1435,6 +1470,10 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1493,6 +1532,10 @@ msgstr "ピンはハードウェア割り込みに対応していなければな
msgid "Pin number already reserved by EXTI"
msgstr "ピン番号はすでにEXTIによって予約されています"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1554,7 +1597,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr "このボードはRTCのキャリブレーションに非対応"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "このボードはRTCに対応していません"
@ -1700,6 +1743,10 @@ msgstr "ストリームにreadinto()またはwrite()メソッドがありませ
msgid "Supply at least one UART pin"
msgstr "少なくとも1つのUARTピンが必要"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr "system引数はgnss.SatelliteSystemでなければなりません"
@ -1769,6 +1816,10 @@ msgstr "タイル値が範囲外"
msgid "Tile width must exactly divide bitmap width"
msgstr "タイルの幅はビットマップの幅を割り切れる値でなければなりません"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1965,7 +2016,7 @@ msgstr "電圧読み取りがタイムアウト"
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2044,10 +2095,6 @@ msgstr "アドレスが範囲外"
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -2056,6 +2103,10 @@ msgstr ""
msgid "argsort argument must be an ndarray"
msgstr "argsortの引数はndarrayでなければなりません"
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr ""
@ -2073,14 +2124,22 @@ msgstr ""
msgid "argument should be a '%q' not a '%q'"
msgstr "引数には '%q' が必要('%q' ではなく)"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "引数はndarrayでなければなりません"
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "右辺にはarray/bytesが必要"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2090,16 +2149,16 @@ msgid "attributes not supported yet"
msgstr "属性は未対応です"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr "axisは -1, 0, 1, None のいずれかでなければなりません"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr "axisは -1, 0, 1 のいずれかでなければなりません"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgstr "axisは None, 0, 1 のいずれか"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
msgid "bad compile mode"
@ -2302,6 +2361,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr "手動と自動のフィールド指定は混在できません"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
@ -2318,10 +2381,6 @@ msgstr ""
msgid "cannot perform relative import"
msgstr "相対インポートはできません"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr "入力/出力シェイプが互換でなくreshapeできません"
#: py/emitnative.c
msgid "casting"
msgstr ""
@ -2396,10 +2455,6 @@ msgstr "convolve引数はndarrayでなければなりません"
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "ヴァンデルモンド行列の逆行列を求められません"
@ -2408,6 +2463,10 @@ msgstr "ヴァンデルモンド行列の逆行列を求められません"
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr "dataはイテレート可能でなければなりません"
@ -2416,10 +2475,6 @@ msgstr "dataはイテレート可能でなければなりません"
msgid "data must be of equal length"
msgstr "dataは同じ長さでなければなりません"
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
@ -2451,6 +2506,10 @@ msgstr ""
msgid "diff argument must be an ndarray"
msgstr "引数はndarrayでなければなりません"
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2480,6 +2539,10 @@ msgstr ""
msgid "end_x should be an int"
msgstr "end_xは整数でなければなりません"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2566,6 +2629,10 @@ msgstr "1つ目の引数は呼び出し可能でなければなりません"
msgid "first argument must be a function"
msgstr "1つ目の引数は関数でなければなりません"
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "1つ目の引数はイテレート可能でなければなりません"
@ -2619,9 +2686,9 @@ msgstr ""
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr "スカラ値およびndarrayのみを受け取ります"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
@ -2690,6 +2757,7 @@ msgstr ""
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "インデクスが範囲外"
@ -2715,6 +2783,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr "インラインアセンブラは関数でなければなりません"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2723,6 +2795,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr "入力array長は2の累乗でなければなりません"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2735,6 +2811,22 @@ msgstr "入力行列が非対称"
msgid "input matrix is singular"
msgstr "入力が非正則行列"
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "入力は正方行列でなければなりません"
@ -2747,6 +2839,10 @@ msgstr "入力はtuple, list, range, ndarrayでなければなりません"
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "int()の第2引数は2以上36以下でなければなりません"
@ -2786,7 +2882,7 @@ msgstr ""
#: shared-bindings/wifi/Radio.c
msgid "invalid hostname"
msgstr ""
msgstr "不正なホスト名"
#: extmod/modussl_axtls.c
msgid "invalid key"
@ -2817,6 +2913,10 @@ msgstr ""
msgid "invalid syntax for number"
msgstr "数字として不正な構文"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass()の第1引数はクラスでなければなりません"
@ -2915,6 +3015,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr "max_lengthは0より大きくなければなりません"
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "最大の再帰深度を超えました"
@ -2964,10 +3068,6 @@ msgstr ""
msgid "must use keyword argument for key function"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr "nは0から9まで"
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "名前 '%q' は定義されていません"
@ -3050,6 +3150,10 @@ msgstr "*/** の後に非キーワード引数は置けません"
msgid "non-keyword arg after keyword arg"
msgstr "キーワード引数の後に非キーワード引数は置けません"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "128ビットのUUIDではありません"
@ -3062,10 +3166,6 @@ msgstr "文字列書式化で全ての引数が使われていません"
msgid "not enough arguments for format string"
msgstr "書式化文字列への引数が足りません"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr "引数は2個または3個でなければなりません"
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3118,6 +3218,10 @@ msgstr ""
msgid "odd-length string"
msgstr "奇数長の文字列"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""
@ -3140,6 +3244,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "この演算はndarray上で実装されていません"
@ -3232,6 +3344,7 @@ msgstr "pow()の3つ目の引数は0にできません"
msgid "pow() with 3 arguments requires integers"
msgstr "pow()の第3引数には整数が必要"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3275,6 +3388,10 @@ msgstr "相対インポート"
msgid "requested length %d but object has length %d"
msgstr "必要な長さは%dですがオブジェクトの長さは%d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "戻り値のアノテーションは識別子でなければなりません"
@ -3293,9 +3410,9 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d]はクロックと同じポートではありません"
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr "右辺は ndarray またはスカラ値でなければなりません"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
msgid "rsplit(None,n)"
@ -3321,8 +3438,8 @@ msgid "script compilation not supported"
msgstr "スクリプトのコンパイルは非対応"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr "shapeは2値のタプルでなければなりません"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
msgid "sign not allowed in string format specifier"
@ -3364,10 +3481,6 @@ msgstr "ソフトリブート\n"
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3448,6 +3561,7 @@ msgstr "threshouldは0から65536まで"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time()は9要素のシーケンスを受け取ります"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr "タイムアウト長は対応する最大値を超えています"
@ -3472,6 +3586,10 @@ msgstr "v2カードの待機がタイムアウトしました"
msgid "timestamp out of range for platform time_t"
msgstr "timestampがプラットフォームのtime_tの範囲外"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "指定された書式に対して引数が多すぎます"
@ -3489,6 +3607,10 @@ msgstr "アンパックする値が多すぎます (%d個を期待)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr "trapzは同じ長さの1次元arrayに対して定義されています"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr ""
@ -3631,6 +3753,14 @@ msgstr "value_countは0より大きくなければなりません"
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr "watchdogのtimeoutは0以上でなければなりません"
@ -3643,13 +3773,13 @@ msgstr ""
msgid "window must be <= interval"
msgstr "windowはinterval以下でなければなりません"
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "引数の型が不正"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "インデクスの型が不正"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3673,7 +3803,7 @@ msgstr ""
#: shared-module/displayio/Shape.c
msgid "x value out of bounds"
msgstr ""
msgstr "xが範囲外"
#: shared-bindings/displayio/Shape.c
msgid "y should be an int"
@ -3699,6 +3829,39 @@ msgstr "ziはfloat値でなければなりません"
msgid "zi must be of shape (n_section, 2)"
msgstr ""
#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "axisは -1, 0, 1, None のいずれかでなければなりません"
#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "axisは -1, 0, 1 のいずれかでなければなりません"
#~ msgid "axis must be None, 0, or 1"
#~ msgstr "axisは None, 0, 1 のいずれか"
#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr "入力/出力シェイプが互換でなくreshapeできません"
#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr "スカラ値およびndarrayのみを受け取ります"
#~ msgid "n must be between 0, and 9"
#~ msgstr "nは0から9まで"
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "引数は2個または3個でなければなりません"
#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "右辺は ndarray またはスカラ値でなければなりません"
#~ msgid "shape must be a 2-tuple"
#~ msgstr "shapeは2値のタプルでなければなりません"
#~ msgid "wrong argument type"
#~ msgstr "引数の型が不正"
#~ msgid "wrong index type"
#~ msgstr "インデクスの型が不正"
#~ msgid "Must provide SCK pin"
#~ msgstr "SCKピンが必要"

View File

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-10-05 12:12+0000\n"
"Last-Translator: Michal Čihař <michal@cihar.com>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@ -298,7 +298,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr "사용중인 모든 I2C주변 기기"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -334,6 +336,7 @@ msgstr "핀의 모든 타이머가 사용 중입니다"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -433,6 +436,11 @@ msgstr ""
msgid "Bit clock and word select must share a clock unit"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr ""
@ -494,7 +502,8 @@ msgstr ""
msgid "Buffer must be a multiple of 512 bytes"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "잘못된 크기의 버퍼. >1 여야합니다"
@ -840,6 +849,10 @@ msgstr "UUID이 예상되었습니다."
msgid "Expected an Address"
msgstr ""
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -853,6 +866,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -981,6 +998,10 @@ msgstr ""
msgid "I2SOut not available"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -996,6 +1017,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1076,6 +1101,7 @@ msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr ""
@ -1252,6 +1278,10 @@ msgstr ""
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
@ -1270,6 +1300,11 @@ msgstr ""
msgid "No DMA channel found"
msgstr ""
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1402,14 +1437,14 @@ msgstr ""
msgid "Only 8 or 16 bit mono with "
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1423,6 +1458,10 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
@ -1480,6 +1519,10 @@ msgstr ""
msgid "Pin number already reserved by EXTI"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1541,7 +1584,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr ""
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""
@ -1687,6 +1730,10 @@ msgstr ""
msgid "Supply at least one UART pin"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
@ -1750,6 +1797,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1946,7 +1997,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2025,10 +2076,6 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@ -2037,6 +2084,10 @@ msgstr ""
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr ""
@ -2054,14 +2105,22 @@ msgstr ""
msgid "argument should be a '%q' not a '%q'"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2071,15 +2130,15 @@ msgid "attributes not supported yet"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2283,6 +2342,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
@ -2299,10 +2362,6 @@ msgstr ""
msgid "cannot perform relative import"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr ""
@ -2375,10 +2434,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2387,6 +2442,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2395,10 +2454,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
@ -2428,6 +2483,10 @@ msgstr ""
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2457,6 +2516,10 @@ msgstr ""
msgid "end_x should be an int"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2543,6 +2606,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
@ -2596,8 +2663,8 @@ msgstr ""
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2667,6 +2734,7 @@ msgstr ""
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr ""
@ -2691,6 +2759,10 @@ msgstr ""
msgid "inline assembler must be a function"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2699,6 +2771,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2711,6 +2787,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr ""
@ -2723,6 +2815,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr ""
@ -2793,6 +2889,10 @@ msgstr "구문(syntax)가 정수가 유효하지 않습니다"
msgid "invalid syntax for number"
msgstr "숫자에 대한 구문(syntax)가 유효하지 않습니다"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
@ -2891,6 +2991,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
@ -2940,10 +3044,6 @@ msgstr ""
msgid "must use keyword argument for key function"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""
@ -3026,6 +3126,10 @@ msgstr ""
msgid "non-keyword arg after keyword arg"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
@ -3038,10 +3142,6 @@ msgstr ""
msgid "not enough arguments for format string"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
@ -3094,6 +3194,10 @@ msgstr ""
msgid "odd-length string"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""
@ -3116,6 +3220,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
@ -3206,6 +3318,7 @@ msgstr ""
msgid "pow() with 3 arguments requires integers"
msgstr ""
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3249,6 +3362,10 @@ msgstr ""
msgid "requested length %d but object has length %d"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
@ -3267,8 +3384,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3294,7 +3411,7 @@ msgid "script compilation not supported"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3337,10 +3454,6 @@ msgstr ""
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
@ -3421,6 +3534,7 @@ msgstr ""
msgid "time.struct_time() takes a 9-sequence"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3445,6 +3559,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""
@ -3462,6 +3580,10 @@ msgstr ""
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr ""
@ -3604,6 +3726,14 @@ msgstr ""
msgid "vectors must have same lengths"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3616,12 +3746,12 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c

View File

@ -5,7 +5,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-10-27 16:47+0000\n"
"Last-Translator: Jelle Jager <jell@jjc.id.au>\n"
"Language-Team: none\n"
@ -300,7 +300,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr "Alle I2C peripherals zijn in gebruik"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -336,6 +338,7 @@ msgstr "Alle timers voor deze pin zijn in gebruik"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -435,6 +438,11 @@ msgstr "Onder de minimum frame rate"
msgid "Bit clock and word select must share a clock unit"
msgstr "Bit clock en word select moeten een clock eenheid delen"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Bit diepte moet een meervoud van 8 zijn."
@ -496,7 +504,8 @@ msgstr "Buffer lengte moet een veelvoud van 512 zijn"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Buffer moet een veelvoud van 512 bytes zijn"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Buffer moet op zijn minst lengte 1 zijn"
@ -848,6 +857,10 @@ msgstr "Verwachtte een UUID"
msgid "Expected an Address"
msgstr "Verwachtte een adres"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -861,6 +874,10 @@ msgstr "Extended advertisements met scan antwoord niet ondersteund."
msgid "FFT is defined for ndarrays only"
msgstr "FFT alleen voor ndarrays gedefineerd"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr "SSL handdruk mislukt"
@ -991,6 +1008,10 @@ msgstr "I2C Init Fout"
msgid "I2SOut not available"
msgstr "I2SOut is niet beschikbaar"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1008,6 +1029,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "Incorrecte buffer grootte"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "Invoer duurt te lang"
@ -1088,6 +1113,7 @@ msgid "Invalid byteorder string"
msgstr "Ongeldige byteorder string"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Ongeldige vastlegging periode. Geldig bereik: 1 - 500"
@ -1264,6 +1290,10 @@ msgstr "MISO of MOSI moeten worden gegeven"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Een meervoud van 6 rgb pinnen moet worden gebruikt, niet %d"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr "Naam te lang"
@ -1282,6 +1312,11 @@ msgstr "Geen DAC op de chip"
msgid "No DMA channel found"
msgstr "Geen DMA kanaal gevonden"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1416,14 +1451,14 @@ msgstr "Oneven pariteit is niet ondersteund"
msgid "Only 8 or 16 bit mono with "
msgstr "Alleen 8 of 16 bit mono met "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr "Alleen IPv4 SOCK_STREAM sockets worden ondersteund"
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Alleen IPv4 adressen worden ondersteund"
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1441,6 +1476,10 @@ msgstr ""
"Alleen monochrome en 4bpp of 8bpp, en 16bpp of grotere geïndiceerde BMP's "
"zijn ondersteund: %d bpp is gegeven"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr "Er kan maar één kleur per keer transparant zijn"
@ -1501,6 +1540,10 @@ msgstr "Pin moet hardware interrupts ondersteunen"
msgid "Pin number already reserved by EXTI"
msgstr "Pin nummer al gereserveerd door EXTI"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1571,7 +1614,7 @@ msgstr "RS485 inversie gespecificeerd terwijl niet in RS485 modus"
msgid "RTC calibration is not supported on this board"
msgstr "RTC calibratie niet ondersteund door dit board"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "RTC is niet ondersteund door dit board"
@ -1717,6 +1760,10 @@ msgstr "Stream mist readinto() of write() methode."
msgid "Supply at least one UART pin"
msgstr "Geef op zijn minst 1 UART pin op"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr "Systeem invoer moet gnss.SatelliteSystem zijn"
@ -1788,6 +1835,10 @@ msgstr "Tile waarde buiten bereik"
msgid "Tile width must exactly divide bitmap width"
msgstr "Tile breedte moet exact de bitmap breedte verdelen"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1987,7 +2038,7 @@ msgstr "Voltage lees time-out"
msgid "WARNING: Your code filename has two extensions\n"
msgstr "WAARSCHUWING: De bestandsnaam van de code heeft twee extensies\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
"WatchDogTimer kan niet worden gedeïnitialiseerd zodra de modus in ingesteld "
@ -2075,10 +2126,6 @@ msgstr "adres buiten bereik"
msgid "addresses is empty"
msgstr "adressen zijn leeg"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr "arctan2 is alleen geïmplementeerd voor scalars en ndarrays"
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "arg is een lege sequentie"
@ -2087,6 +2134,10 @@ msgstr "arg is een lege sequentie"
msgid "argsort argument must be an ndarray"
msgstr "argsort argument moet een ndarray zijn"
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr "argument heeft onjuist type"
@ -2104,14 +2155,22 @@ msgstr "argument num/typen komen niet overeen"
msgid "argument should be a '%q' not a '%q'"
msgstr "argument moet een '%q' zijn en niet een '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "argumenten moeten ndarrays zijn"
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "array/bytes vereist aan de rechterkant"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr "poging om argmin/argmax van een lege sequentie te krijgen"
@ -2121,16 +2180,16 @@ msgid "attributes not supported yet"
msgstr "attributen nog niet ondersteund"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr "as moet -1, 0, None, of 1 zijn"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr "as moet -1, 0, of 1 zijn"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgstr "as moet None, 0, of 1 zijn"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
msgid "bad compile mode"
@ -2334,6 +2393,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr "kan niet schakelen tussen handmatige en automatische veld specificatie"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "kan geen instanties van '%q' creëren"
@ -2350,10 +2413,6 @@ msgstr "kan naam %q niet importeren"
msgid "cannot perform relative import"
msgstr "kan geen relatieve import uitvoeren"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr "kan de array niet hervormen (niet verenigbare input/output vorm)"
#: py/emitnative.c
msgid "casting"
msgstr "casting"
@ -2427,10 +2486,6 @@ msgstr "convolutie argumenten moeten ndarrays zijn"
msgid "convolve arguments must not be empty"
msgstr "convolutie argumenten mogen niet leeg zijn"
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr "kon de invoerarray niet vanuit vorm uitzenden"
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "kon de Vandermonde matrix niet omkeren"
@ -2439,6 +2494,10 @@ msgstr "kon de Vandermonde matrix niet omkeren"
msgid "couldn't determine SD card version"
msgstr "kon SD kaart versie niet bepalen"
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr "data moet itereerbaar zijn"
@ -2447,10 +2506,6 @@ msgstr "data moet itereerbaar zijn"
msgid "data must be of equal length"
msgstr "data moet van gelijke lengte zijn"
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr "ddof kleiner dan de lengte van de data set"
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "decimale getallen zijn niet ondersteund"
@ -2482,6 +2537,10 @@ msgstr "dict update sequence heeft de verkeerde lengte"
msgid "diff argument must be an ndarray"
msgstr "diff argument moet een ndarray zijn"
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2511,6 +2570,10 @@ msgstr "einde van format terwijl zoekend naar conversie-specifier"
msgid "end_x should be an int"
msgstr "end_x moet een int zijn"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2597,6 +2660,10 @@ msgstr "eerste argument moet een aanroepbare (callable) zijn"
msgid "first argument must be a function"
msgstr "eerste argument moet een functie zijn"
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "eerst argument moet een iterabel zijn"
@ -2650,9 +2717,9 @@ msgstr "functie kreeg meedere waarden voor argument '%q'"
msgid "function has the same sign at the ends of interval"
msgstr "functie heeft hetzelfde teken aan beide uiteinden van het interval"
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr "funtie is alleen geïmplementeerd voor scalars en ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
@ -2722,6 +2789,7 @@ msgstr "vulling (padding) is onjuist"
msgid "index is out of bounds"
msgstr "index is buiten bereik"
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index is buiten bereik"
@ -2746,6 +2814,10 @@ msgstr "lengte van initial_value is onjuist"
msgid "inline assembler must be a function"
msgstr "inline assembler moet een functie zijn"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr "invoerargument moet een integer of 2-tuple zijn"
@ -2754,6 +2826,10 @@ msgstr "invoerargument moet een integer of 2-tuple zijn"
msgid "input array length must be power of 2"
msgstr "invoer array lengte moet een macht van 2 zijn"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr "invoerdata moet itereerbaar zijn"
@ -2766,6 +2842,22 @@ msgstr "invoermatrix is asymmetrisch"
msgid "input matrix is singular"
msgstr "invoermatrix is singulier"
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "invoer moet een vierkante matrix zijn"
@ -2778,6 +2870,10 @@ msgstr "invoer moet een tuple, lijst, bereik of ndarray zijn"
msgid "input vectors must be of equal length"
msgstr "invoervectors moeten van gelijke lengte zijn"
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "int() argument 2 moet >=2 en <= 36 zijn"
@ -2848,6 +2944,10 @@ msgstr "ongeldige syntax voor integer met grondtal %d"
msgid "invalid syntax for number"
msgstr "ongeldige syntax voor nummer"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass() argument 1 moet een klasse zijn"
@ -2949,6 +3049,10 @@ msgstr "max_length moet 0-%d zijn als fixed_length %s is"
msgid "max_length must be > 0"
msgstr "max_length moet >0 zijn"
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "maximale recursiediepte overschreden"
@ -2998,10 +3102,6 @@ msgstr "moet een object oproepen (raise)"
msgid "must use keyword argument for key function"
msgstr "voor sleutelfunctie moet een trefwoordargument gebruikt worden"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr "n moet tussen 0 en 9 liggen"
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "naam '%q' is niet gedefinieerd"
@ -3084,6 +3184,10 @@ msgstr "niet-trefwoord argument na */**"
msgid "non-keyword arg after keyword arg"
msgstr "niet-trefwoord argument na trefwoord argument"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "geen 128-bit UUID"
@ -3096,10 +3200,6 @@ msgstr "niet alle argumenten omgezet bij formattering van string"
msgid "not enough arguments for format string"
msgstr "niet genoeg argumenten om string te formatteren"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr "aantal argumenten moet 2 of 3 zijn"
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr "aantal punten moet minimaal 2 zijn"
@ -3152,6 +3252,10 @@ msgstr "object met buffer protocol vereist"
msgid "odd-length string"
msgstr "string met oneven lengte"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "offset buiten bereik"
@ -3174,6 +3278,14 @@ msgstr "alleen segmenten met step=1 (ook wel None) worden ondersteund"
msgid "operands could not be broadcast together"
msgstr "operands konden niet samen verzonden worden"
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "bewerking is voor ndarrays niet geïmplementeerd"
@ -3265,6 +3377,7 @@ msgstr "derde argument van pow() mag geen 0 zijn"
msgid "pow() with 3 arguments requires integers"
msgstr "pow() met 3 argumenten vereist integers"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3308,6 +3421,10 @@ msgstr "relatieve import"
msgid "requested length %d but object has length %d"
msgstr "gevraagde lengte is %d maar object heeft lengte %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "return annotatie moet een identifier zijn"
@ -3326,9 +3443,9 @@ msgstr "rgb_pins[%d] is hetzelfde als een andere pintoewijzing"
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] bevindt zich niet op dezelfde poort als klok"
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr "de rechterkant moet een ndarray of scalar zijn"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
msgid "rsplit(None,n)"
@ -3355,8 +3472,8 @@ msgid "script compilation not supported"
msgstr "scriptcompilatie wordt niet ondersteund"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr "vorm moet een 2-tuple zijn"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
msgid "sign not allowed in string format specifier"
@ -3398,10 +3515,6 @@ msgstr "zachte herstart\n"
msgid "sort argument must be an ndarray"
msgstr "sorteerargument moet een ndarray zijn"
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr "sos array moet vorm (n_section, 6) hebben"
@ -3482,6 +3595,7 @@ msgstr "drempelwaarde moet in het bereik 0-65536 liggen"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() accepteert een 9-rij"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr "time-outduur is groter dan de ondersteunde maximale waarde"
@ -3506,6 +3620,10 @@ msgstr "timeout bij wachten op v2 kaart"
msgid "timestamp out of range for platform time_t"
msgstr "timestamp buiten bereik voor platform time_t"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "te veel argumenten opgegeven bij dit formaat"
@ -3523,6 +3641,10 @@ msgstr "te veel waarden om uit te pakken (%d verwacht)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr "trapz is gedefinieerd voor eendimensionale arrays van gelijke lengte"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "tuple index buiten bereik"
@ -3665,6 +3787,14 @@ msgstr "value_count moet groter dan 0 zijn"
msgid "vectors must have same lengths"
msgstr "vectoren moeten van gelijke lengte zijn"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr "watchdog time-out moet groter zijn dan 0"
@ -3677,13 +3807,13 @@ msgstr "breedte moet groter dan nul zijn"
msgid "window must be <= interval"
msgstr "window moet <= interval zijn"
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "onjuist argumenttype"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "onjuist indextype"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3733,6 +3863,51 @@ msgstr "zi moet van type float zijn"
msgid "zi must be of shape (n_section, 2)"
msgstr "zi moet vorm (n_section, 2) hebben"
#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
#~ msgstr "Alleen IPv4 SOCK_STREAM sockets worden ondersteund"
#~ msgid "arctan2 is implemented for scalars and ndarrays only"
#~ msgstr "arctan2 is alleen geïmplementeerd voor scalars en ndarrays"
#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "as moet -1, 0, None, of 1 zijn"
#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "as moet -1, 0, of 1 zijn"
#~ msgid "axis must be None, 0, or 1"
#~ msgstr "as moet None, 0, of 1 zijn"
#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr "kan de array niet hervormen (niet verenigbare input/output vorm)"
#~ msgid "could not broadast input array from shape"
#~ msgstr "kon de invoerarray niet vanuit vorm uitzenden"
#~ msgid "ddof must be smaller than length of data set"
#~ msgstr "ddof kleiner dan de lengte van de data set"
#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr "funtie is alleen geïmplementeerd voor scalars en ndarrays"
#~ msgid "n must be between 0, and 9"
#~ msgstr "n moet tussen 0 en 9 liggen"
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "aantal argumenten moet 2 of 3 zijn"
#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "de rechterkant moet een ndarray of scalar zijn"
#~ msgid "shape must be a 2-tuple"
#~ msgstr "vorm moet een 2-tuple zijn"
#~ msgid "wrong argument type"
#~ msgstr "onjuist argumenttype"
#~ msgid "wrong index type"
#~ msgstr "onjuist indextype"
#~ msgid "Must provide SCK pin"
#~ msgstr "SCK pin moet opgegeven worden"

View File

@ -6,8 +6,8 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-09-29 01:39+0000\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-12-02 20:29+0000\n"
"Last-Translator: Maciej Stankiewicz <tawezik@gmail.com>\n"
"Language-Team: pl\n"
"Language: pl\n"
@ -16,7 +16,7 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
"|| n%100>=20) ? 1 : 2;\n"
"X-Generator: Weblate 4.3-dev\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -76,7 +76,7 @@ msgstr "%q poza zakresem"
#: py/obj.c
msgid "%q indices must be integers, not %q"
msgstr ""
msgstr "%q indeksy muszą być liczbami typu int, a nie %q"
#: shared-bindings/vectorio/Polygon.c
msgid "%q list must be a list"
@ -104,7 +104,7 @@ msgstr "%q poza zakresem"
#: ports/atmel-samd/common-hal/microcontroller/Pin.c
msgid "%q pin invalid"
msgstr ""
msgstr "nieprawidłowy pin %q"
#: shared-bindings/fontio/BuiltinFont.c
msgid "%q should be an int"
@ -128,11 +128,11 @@ msgstr "Obiekt '%q' nie wspiera '%q'"
#: py/obj.c
msgid "'%q' object does not support item assignment"
msgstr ""
msgstr "'%q' obiekt nie wspiera dopisywania elementów"
#: py/obj.c
msgid "'%q' object does not support item deletion"
msgstr ""
msgstr "obiekt '%q' nie wspiera usuwania elementów"
#: py/runtime.c
msgid "'%q' object has no attribute '%q'"
@ -152,7 +152,7 @@ msgstr "Obiekt '%q' nie jest iterowalny"
#: py/obj.c
msgid "'%q' object is not subscriptable"
msgstr ""
msgstr "obiekt '%q' nie jest indeksowany"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
@ -254,7 +254,7 @@ msgstr "'return' poza funkcją"
#: py/compile.c
msgid "'yield from' inside async function"
msgstr ""
msgstr "'yield from' wewnątrz funkcji asynchronicznej"
#: py/compile.c
msgid "'yield' outside function"
@ -283,7 +283,7 @@ msgstr "Kanał przerwań sprzętowych w użyciu"
#: ports/esp32s2/common-hal/analogio/AnalogIn.c
msgid "ADC2 is being used by WiFi"
msgstr ""
msgstr "ADC2 jest używany przez WiFi"
#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
#, c-format
@ -292,7 +292,7 @@ msgstr "Adres musi mieć %d bajtów"
#: shared-bindings/_bleio/Address.c
msgid "Address type out of range"
msgstr ""
msgstr "Typ adresu poza zakresem"
#: ports/esp32s2/common-hal/canio/CAN.c
msgid "All CAN peripherals are in use"
@ -302,7 +302,9 @@ msgstr ""
msgid "All I2C peripherals are in use"
msgstr "Wszystkie peryferia I2C w użyciu"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
@ -338,6 +340,7 @@ msgstr "Wszystkie timery tej nóżki w użyciu"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -406,7 +409,7 @@ msgstr "Próba przydzielenia %d bloków"
#: supervisor/shared/safe_mode.c
msgid "Attempted heap allocation when MicroPython VM not running."
msgstr ""
msgstr "Próba przydziału sterty, gdy MicroPython VM nie działa."
#: shared-bindings/wifi/Radio.c
msgid "Authentication failure"
@ -437,6 +440,11 @@ msgstr ""
msgid "Bit clock and word select must share a clock unit"
msgstr "Zegar bitowy i wybór słowa muszą współdzielić jednostkę zegara"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Głębia musi być wielokrotnością 8."
@ -498,7 +506,8 @@ msgstr "Długość bufora musi być wielokrotnością 512"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Bufor musi być wielokrotnością 512 bajtów"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Bufor musi mieć długość 1 lub więcej"
@ -848,6 +857,10 @@ msgstr "Oczekiwano UUID"
msgid "Expected an Address"
msgstr "Oczekiwano adresu"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -861,6 +874,10 @@ msgstr ""
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr ""
@ -989,6 +1006,10 @@ msgstr "Błąd inicjalizacji I2C"
msgid "I2SOut not available"
msgstr "I2SOut niedostępne"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1006,6 +1027,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "Niewłaściwa wielkość bufora"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
@ -1033,7 +1058,7 @@ msgstr "Błąd wewnętrzny #%d"
#: shared-bindings/sdioio/SDCard.c
msgid "Invalid %q"
msgstr ""
msgstr "Nieprawidłowe %q"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
@ -1086,6 +1111,7 @@ msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Zły okres. Poprawny zakres to: 1 - 500"
@ -1107,7 +1133,7 @@ msgstr "Zła wielkość fragmentu formatu"
#: ports/esp32s2/common-hal/pwmio/PWMOut.c
msgid "Invalid frequency"
msgstr ""
msgstr "Nieprawidłowa częstotliwość"
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Invalid frequency supplied"
@ -1174,7 +1200,7 @@ msgstr "Zły tryb uruchomienia."
#: shared-module/_bleio/Attribute.c
msgid "Invalid security_mode"
msgstr ""
msgstr "Nieprawidłowy security_mode"
#: shared-bindings/audiomixer/Mixer.c
msgid "Invalid voice"
@ -1206,7 +1232,7 @@ msgstr ""
#: shared-module/displayio/Group.c
msgid "Layer must be a Group or TileGrid subclass."
msgstr "Layer musi dziedziczyć z Group albo TileGrid"
msgstr "Layer musi dziedziczyć z Group albo TileGrid."
#: py/objslice.c
msgid "Length must be an int"
@ -1263,6 +1289,10 @@ msgstr "Należy podać pin MISO lub MOSI"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr "Za długa nazwa"
@ -1281,6 +1311,11 @@ msgstr "Brak DAC"
msgid "No DMA channel found"
msgstr "Nie znaleziono kanału DMA"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1344,7 +1379,7 @@ msgstr ""
#: ports/esp32s2/common-hal/pwmio/PWMOut.c
msgid "No more channels available"
msgstr ""
msgstr "Brak dostępnych kanałów"
#: ports/esp32s2/common-hal/pwmio/PWMOut.c
msgid "No more timers available"
@ -1372,7 +1407,7 @@ msgstr "Brak pliku/katalogu"
#: shared-module/rgbmatrix/RGBMatrix.c
msgid "No timer available"
msgstr ""
msgstr "Brak dostępnego timera"
#: supervisor/shared/safe_mode.c
msgid "Nordic Soft Device failure assertion."
@ -1413,14 +1448,14 @@ msgstr "Nieparzysta parzystość nie jest wspierana"
msgid "Only 8 or 16 bit mono with "
msgstr "Tylko 8 lub 16 bitów mono z "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr ""
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1434,9 +1469,13 @@ msgid ""
"%d bpp given"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
msgstr "W danym momencie przezroczysty może być tylko jeden kolor"
#: shared-bindings/ipaddress/__init__.c
msgid "Only raw int supported for ip"
@ -1491,6 +1530,10 @@ msgstr "Pin musi obsługiwać przerwania sprzętowe"
msgid "Pin number already reserved by EXTI"
msgstr ""
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1505,7 +1548,7 @@ msgstr "Oraz moduły w systemie plików\n"
#: shared-module/vectorio/Polygon.c
msgid "Polygon needs at least 3 points"
msgstr ""
msgstr "Wielokąt musi mieć co najmniej 3 punkty"
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
msgid ""
@ -1552,7 +1595,7 @@ msgstr ""
msgid "RTC calibration is not supported on this board"
msgstr "Brak obsługi kalibracji RTC"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "Brak obsługi RTC"
@ -1563,7 +1606,7 @@ msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
msgstr "Błąd generowania liczb losowych"
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
@ -1644,11 +1687,11 @@ msgstr "Skanuj już w toku. Zatrzymaj za pomocą stop_scan."
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Selected CTS pin not valid"
msgstr ""
msgstr "Wybrany pin CTS jest nieprawidłowy"
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Selected RTS pin not valid"
msgstr ""
msgstr "Wybrany pin RTS jest nieprawidłowy"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
@ -1696,6 +1739,10 @@ msgstr "Strumień nie ma metod readinto() lub write()."
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr "Podaj co najmniej jeden pin UART"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
@ -1761,6 +1808,10 @@ msgstr ""
msgid "Tile width must exactly divide bitmap width"
msgstr "Szerokość bitmapy musi być wielokrotnością szerokości kafelka"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1817,7 +1868,7 @@ msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART write error"
msgstr ""
msgstr "Błąd zapisu UART"
#: shared-module/usb_hid/Device.c
msgid "USB Busy"
@ -1956,7 +2007,7 @@ msgstr ""
msgid "WARNING: Your code filename has two extensions\n"
msgstr "UWAGA: Nazwa pliku ma dwa rozszerzenia\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
@ -2014,7 +2065,7 @@ msgstr "__init__() powinien zwracać None"
#: py/objtype.c
msgid "__init__() should return None, not '%q'"
msgstr ""
msgstr "__init__() powinno zwrócić None, a nie '%q'"
#: py/objobject.c
msgid "__new__ arg must be a user-type"
@ -2041,10 +2092,6 @@ msgstr "adres poza zakresem"
msgid "addresses is empty"
msgstr "adres jest pusty"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "arg jest puste"
@ -2053,6 +2100,10 @@ msgstr "arg jest puste"
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr "argument ma zły typ"
@ -2070,14 +2121,22 @@ msgstr "zła liczba lub typ argumentów"
msgid "argument should be a '%q' not a '%q'"
msgstr "argument powinien być '%q' a nie '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "tablica/bytes wymagane po prawej stronie"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
@ -2087,15 +2146,15 @@ msgid "attributes not supported yet"
msgstr "atrybuty nie są jeszcze obsługiwane"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
@ -2299,6 +2358,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr "nie można zmienić z ręcznego numerowaniu pól do automatycznego"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "nie można tworzyć instancji '%q'"
@ -2315,10 +2378,6 @@ msgstr "nie można zaimportować nazwy %q"
msgid "cannot perform relative import"
msgstr "nie można wykonać relatywnego importu"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr "rzutowanie"
@ -2391,10 +2450,6 @@ msgstr ""
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
@ -2403,6 +2458,10 @@ msgstr ""
msgid "couldn't determine SD card version"
msgstr "nie można określić wersji karty SD"
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr ""
@ -2411,10 +2470,6 @@ msgstr ""
msgid "data must be of equal length"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "liczby dziesiętne nieobsługiwane"
@ -2445,6 +2500,10 @@ msgstr "sekwencja ma złą długość"
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2474,6 +2533,10 @@ msgstr "koniec formatu przy szukaniu specyfikacji konwersji"
msgid "end_x should be an int"
msgstr "end_x powinien być całkowity"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2560,6 +2623,10 @@ msgstr ""
msgid "first argument must be a function"
msgstr "pierwszy argument musi być funkcją"
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "pierwszy argument musi być iterowalny"
@ -2613,8 +2680,8 @@ msgstr "funkcja dostała wiele wartości dla argumentu '%q'"
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
@ -2684,6 +2751,7 @@ msgstr "złe wypełnienie"
msgid "index is out of bounds"
msgstr "indeks jest poza zakresem"
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "indeks poza zakresem"
@ -2708,6 +2776,10 @@ msgstr "długość initial_value jest nieprawidłowa"
msgid "inline assembler must be a function"
msgstr "wtrącony asembler musi być funkcją"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
@ -2716,6 +2788,10 @@ msgstr ""
msgid "input array length must be power of 2"
msgstr "długość tablicy wejściowej musi być potęgą 2"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr ""
@ -2728,6 +2804,22 @@ msgstr ""
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "wejście musi być macierzą kwadratową"
@ -2740,6 +2832,10 @@ msgstr ""
msgid "input vectors must be of equal length"
msgstr "wektory wejściowe muszą być równej długości"
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "argument 2 do int() busi być pomiędzy 2 a 36"
@ -2810,6 +2906,10 @@ msgstr "zła składnia dla liczby całkowitej w bazie %d"
msgid "invalid syntax for number"
msgstr "zła składnia dla liczby"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "argument 1 dla issubclass() musi być klasą"
@ -2908,6 +3008,10 @@ msgstr ""
msgid "max_length must be > 0"
msgstr "max_length musi być > 0"
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "przekroczono dozwoloną głębokość rekurencji"
@ -2957,10 +3061,6 @@ msgstr "wyjątek musi być obiektem"
msgid "must use keyword argument for key function"
msgstr "funkcja key musi być podana jako argument nazwany"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "nazwa '%q' niezdefiniowana"
@ -3043,6 +3143,10 @@ msgstr "argument nienazwany po */**"
msgid "non-keyword arg after keyword arg"
msgstr "argument nienazwany po nazwanym"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "to nie jest 128-bitowy UUID"
@ -3055,13 +3159,9 @@ msgstr "nie wszystkie argumenty wykorzystane w formatowaniu"
msgid "not enough arguments for format string"
msgstr "nie dość argumentów przy formatowaniu"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr ""
msgstr "liczba punktów musi wynosić co najmniej 2"
#: py/obj.c
msgid "object '%q' is not a tuple or list"
@ -3111,6 +3211,10 @@ msgstr "wymagany obiekt z protokołem buforu"
msgid "odd-length string"
msgstr "łańcuch o nieparzystej długości"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "offset poza zakresem"
@ -3131,6 +3235,14 @@ msgstr "tylko fragmenty ze step=1 (lub None) są wspierane"
#: extmod/ulab/code/compare/compare.c extmod/ulab/code/ndarray.c
#: extmod/ulab/code/vector/vectorise.c
msgid "operands could not be broadcast together"
msgstr "operandy nie mogły być rozgłaszane razem"
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
@ -3224,6 +3336,7 @@ msgstr "trzeci argument pow() nie może być 0"
msgid "pow() with 3 arguments requires integers"
msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3267,6 +3380,10 @@ msgstr "relatywny import"
msgid "requested length %d but object has length %d"
msgstr "zażądano długości %d ale obiekt ma długość %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "anotacja wartości musi być identyfikatorem"
@ -3285,8 +3402,8 @@ msgstr ""
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
@ -3313,7 +3430,7 @@ msgid "script compilation not supported"
msgstr "kompilowanie skryptów nieobsługiwane"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
@ -3354,11 +3471,7 @@ msgstr "programowy reset\n"
#: extmod/ulab/code/numerical/numerical.c
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr ""
msgstr "argument sort musi być ndarray"
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
@ -3374,7 +3487,7 @@ msgstr ""
#: shared-bindings/displayio/Bitmap.c
msgid "source palette too large"
msgstr ""
msgstr "źródłowa paleta jest zbyt duża"
#: py/objstr.c
msgid "start/end indices"
@ -3440,6 +3553,7 @@ msgstr "threshold musi być w zakresie 0-65536"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() wymaga 9-elementowej sekwencji"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
@ -3464,6 +3578,10 @@ msgstr ""
msgid "timestamp out of range for platform time_t"
msgstr "timestamp poza zakresem dla time_t na tej platformie"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "zbyt wiele argumentów podanych dla tego formatu"
@ -3481,6 +3599,10 @@ msgstr "zbyt wiele wartości do rozpakowania (oczekiwano %d)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "indeks krotki poza zakresem"
@ -3623,6 +3745,14 @@ msgstr "value_count musi być > 0"
msgid "vectors must have same lengths"
msgstr "wektory muszą mieć identyczną długość"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
@ -3635,13 +3765,13 @@ msgstr ""
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "zły typ argumentu"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "zły typ indeksu"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3657,7 +3787,7 @@ msgstr "zła liczba wartości do rozpakowania"
#: extmod/ulab/code/ndarray.c
msgid "wrong operand type"
msgstr ""
msgstr "zły typ operandu"
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong output type"
@ -3691,6 +3821,15 @@ msgstr ""
msgid "zi must be of shape (n_section, 2)"
msgstr ""
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "liczba argumentów musi wynosić 2 lub 3"
#~ msgid "wrong argument type"
#~ msgstr "zły typ argumentu"
#~ msgid "wrong index type"
#~ msgstr "zły typ indeksu"
#~ msgid "Must provide SCK pin"
#~ msgstr "Należy podać pin SCK"

View File

@ -5,8 +5,8 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-11-08 10:26+0000\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-11-30 18:06+0000\n"
"Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
"Language-Team: \n"
"Language: pt_BR\n"
@ -14,7 +14,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n > 1;\n"
"X-Generator: Weblate 4.3.2\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -304,7 +304,9 @@ msgstr "Todos os periféricos CAN estão em uso"
msgid "All I2C peripherals are in use"
msgstr "Todos os periféricos I2C estão em uso"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr "Todas as unidades PCNT estão em uso"
@ -340,6 +342,7 @@ msgstr "Todos os temporizadores para este pino estão em uso"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -443,6 +446,11 @@ msgstr ""
"O clock de bits e a seleção de palavras devem compartilhar uma unidade de "
"clock"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr "A profundidade dos bits deve ser de 1 até 6 inclusive, porém não %d"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "A profundidade de bits deve ser o múltiplo de 8."
@ -504,7 +512,8 @@ msgstr "O comprimento do Buffer deve ser um múltiplo de 512"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "O buffer deve ser um múltiplo de 512 bytes"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "O comprimento do buffer deve ter pelo menos 1"
@ -857,6 +866,10 @@ msgstr "Um UUID é necessário"
msgid "Expected an Address"
msgstr "Um endereço esperado"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -870,6 +883,10 @@ msgstr "Anúncios estendidos não compatíveis com a resposta da varredura."
msgid "FFT is defined for ndarrays only"
msgstr "O FFT é definido apenas para ndarrays"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr "O FFT é implementado apenas para matrizes lineares"
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr "Houve uma falha no handshake do SSL"
@ -1000,6 +1017,10 @@ msgstr "Erro de inicialização do I2C"
msgid "I2SOut not available"
msgstr "O I2SOut não está disponível"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1017,6 +1038,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "O tamanho do buffer está incorreto"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr "A inicialização falhou devido à falta de memória"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "A entrada está demorando demais"
@ -1097,6 +1122,7 @@ msgid "Invalid byteorder string"
msgstr "A cadeia de bytes é inválida"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "O período de captura é inválido. O intervalo válido é: 1 - 500"
@ -1273,6 +1299,10 @@ msgstr "Deve informar os pinos MISO ou MOSI"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Deve utilizar um múltiplo de 6 pinos rgb, não %d"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr "Erro NVS"
#: py/parse.c
msgid "Name too long"
msgstr "Nome muito longo"
@ -1291,6 +1321,11 @@ msgstr "Nenhum DAC no chip"
msgid "No DMA channel found"
msgstr "Nenhum canal DMA encontrado"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1424,14 +1459,14 @@ msgstr "A paridade ímpar não é compatível"
msgid "Only 8 or 16 bit mono with "
msgstr "Apenas mono com 8 ou 16 bits com "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr "São suportados apenas soquetes IPv4 SOCK_STREAM"
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Somente os endereços IPv4 são suportados"
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr "Apenas soquetes IPv4 são suportados"
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1449,6 +1484,10 @@ msgstr ""
"São compatíveis apenas os BMPs monocromáticos, indexados em 4bpp ou 8bpp e "
"16bpp ou superior: determinado %d bpp"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr "Apenas uma cor pode ser transparente de cada vez"
@ -1510,6 +1549,10 @@ msgstr "O pino deve ser compatível com as interrupções do hardware"
msgid "Pin number already reserved by EXTI"
msgstr "Número do PIN já está reservado através da EXTI"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1581,7 +1624,7 @@ msgstr "A definição da inversão do RS485 quando não está no modo RS485"
msgid "RTC calibration is not supported on this board"
msgstr "A calibração RTC não é suportada nesta placa"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "O RTC não é suportado nesta placa"
@ -1727,6 +1770,10 @@ msgstr "Transmita o método ausente readinto() ou write()."
msgid "Supply at least one UART pin"
msgstr "Forneça pelo menos um pino UART"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr "A entrada no sistema deve ser gnss.SatelliteSystem"
@ -1799,6 +1846,10 @@ msgstr "O valor do bloco está fora dos limites"
msgid "Tile width must exactly divide bitmap width"
msgstr "A largura do bloco deve dividir exatamente com a largura do bitmap"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -2001,7 +2052,7 @@ msgstr "O tempo limite de leitura da tensão expirou"
msgid "WARNING: Your code filename has two extensions\n"
msgstr "AVISO: Seu arquivo de código tem duas extensões\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
"O WatchDogTimer não pode ser não-inicializado uma vez que o modo é definido "
@ -2090,10 +2141,6 @@ msgstr "endereço fora dos limites"
msgid "addresses is empty"
msgstr "os endereços estão vazios"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr "O arctan2 está implementado apenas para escalares e ndarrays"
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "o arg é uma sequência vazia"
@ -2102,6 +2149,10 @@ msgstr "o arg é uma sequência vazia"
msgid "argsort argument must be an ndarray"
msgstr "O argumento argsort deve ser um ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr "argsort não é implementado para matrizes achatadas"
#: py/runtime.c
msgid "argument has wrong type"
msgstr "argumento tem tipo errado"
@ -2119,14 +2170,22 @@ msgstr "o argumento num/tipos não combinam"
msgid "argument should be a '%q' not a '%q'"
msgstr "o argumento deve ser um '%q' e não um '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "os argumentos devem ser ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr "a matriz e comprimento do índice devem ser iguais"
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "matriz/bytes são necessários no lado direito"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr "tentativa de obter (arg)min/(arg)max da sequência vazia"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr "tente obter argmin/argmax de uma sequência vazia"
@ -2136,16 +2195,16 @@ msgid "attributes not supported yet"
msgstr "atributos ainda não suportados"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr "o eixo deve ser -1, 0, Nenhum ou 1"
msgid "axis is out of bounds"
msgstr "o eixo está fora dos limites"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr "o eixo deve ser -1, 0 ou 1"
msgid "axis must be None, or an integer"
msgstr "eixo deve ser Nenhum ou um número inteiro"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgstr "o eixo deve ser Nenhum, 0 ou 1"
msgid "axis too long"
msgstr "o eixo é muito longo"
#: py/builtinevex.c
msgid "bad compile mode"
@ -2352,6 +2411,10 @@ msgid ""
msgstr ""
"não é possível alternar da especificação de campo manual para a automática"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr "não pode lançar a saída com a regra de fundição"
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "não é possível criar instâncias '%q'"
@ -2368,11 +2431,6 @@ msgstr "não pode importar nome %q"
msgid "cannot perform relative import"
msgstr "não pode executar a importação relativa"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
"não é possível remodelar a matriz (formato de entrada/saída incompatível)"
#: py/emitnative.c
msgid "casting"
msgstr "fundição"
@ -2447,10 +2505,6 @@ msgstr "os argumentos convolutivos devem ser ndarrays"
msgid "convolve arguments must not be empty"
msgstr "os argumentos convolutivos não devem estar vazios"
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr "não foi possível transmitir a matriz da entrada a partir da forma"
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "não foi possível inverter a matriz Vandermonde"
@ -2459,6 +2513,10 @@ msgstr "não foi possível inverter a matriz Vandermonde"
msgid "couldn't determine SD card version"
msgstr "não foi possível determinar a versão do cartão SD"
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr "a cruz é definida para matrizes 1D de comprimento 3"
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr "os dados devem ser iteráveis"
@ -2467,10 +2525,6 @@ msgstr "os dados devem ser iteráveis"
msgid "data must be of equal length"
msgstr "os dados devem ser de igual comprimento"
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr "O ddof deve ser menor que o comprimento do conjunto dos dados"
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "os números decimais não são compatíveis"
@ -2503,6 +2557,10 @@ msgstr "sequência da atualização dict tem o comprimento errado"
msgid "diff argument must be an ndarray"
msgstr "O argumento diff deve ser um ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr "ordem de diferenciação fora do alcance"
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2532,6 +2590,10 @@ msgstr "final de formato enquanto procura pelo especificador de conversão"
msgid "end_x should be an int"
msgstr "end_x deve ser um int"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2618,6 +2680,10 @@ msgstr "o primeiro argumento deve ser chamável"
msgid "first argument must be a function"
msgstr "o primeiro argumento deve ser uma função"
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr "o primeiro argumento deve ser um tuple de ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "o primeiro argumento deve ser um iterável"
@ -2671,9 +2737,9 @@ msgstr "A função obteve vários valores para o argumento '%q'"
msgid "function has the same sign at the ends of interval"
msgstr "a função tem o mesmo sinal nas extremidades do intervalo"
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr "A função foi implementada apenas para escalares e ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr "A função é definida apenas para ndarrays"
#: py/argcheck.c
#, c-format
@ -2742,6 +2808,7 @@ msgstr "preenchimento incorreto"
msgid "index is out of bounds"
msgstr "o índice está fora dos limites"
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "Índice fora do intervalo"
@ -2766,6 +2833,10 @@ msgstr "O comprimento do initial_value está errado"
msgid "inline assembler must be a function"
msgstr "o assembler em linha deve ser uma função"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr "as formas de entrada e saída não são compatíveis"
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr "o argumento da entrada deve ser um número inteiro ou uma tupla de 2"
@ -2774,6 +2845,10 @@ msgstr "o argumento da entrada deve ser um número inteiro ou uma tupla de 2"
msgid "input array length must be power of 2"
msgstr "comprimento da matriz da entrada deve ter potência de 2"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr "as matrizes da entrada não são compatíveis"
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr "os dados da entrada devem ser iteráveis"
@ -2786,6 +2861,22 @@ msgstr "a matriz da entrada é assimétrica"
msgid "input matrix is singular"
msgstr "a matriz da entrada é singular"
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr "a entrada deve ser um ndarray denso"
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr "a entrada dos dados deve ser um tensor de nível 2"
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr "a entrada deve ser um ndarray"
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr "a entrada deve ser unidimensional"
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "a entrada deve ser uma matriz quadrada"
@ -2798,6 +2889,10 @@ msgstr "A entrada deve ser tupla, lista, intervalo ou matriz"
msgid "input vectors must be of equal length"
msgstr "os vetores da entrada devem ter o mesmo comprimento"
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr "as entradas não são iteráveis"
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "int() arg 2 deve ser >= 2 e <= 36"
@ -2868,6 +2963,10 @@ msgstr "sintaxe inválida para o número inteiro com base %d"
msgid "invalid syntax for number"
msgstr "sintaxe inválida para o número"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass() arg 1 deve ser uma classe"
@ -2969,6 +3068,10 @@ msgstr "o max_length deve ser 0-%d quando Fixed_length for %s"
msgid "max_length must be > 0"
msgstr "max_length deve ser > 0"
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr "O número máximo de dimensões são 4"
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "a recursão máxima da profundidade foi excedida"
@ -3020,10 +3123,6 @@ msgstr "deve levantar um objeto"
msgid "must use keyword argument for key function"
msgstr "deve usar o argumento da palavra-chave para a função da chave"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr "n deve estar entre 0 e 9"
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "o nome '%q' não está definido"
@ -3106,6 +3205,10 @@ msgstr "um arg sem palavra-chave após */ **"
msgid "non-keyword arg after keyword arg"
msgstr "um arg não-palavra-chave após a palavra-chave arg"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr "a norma é definida para matrizes 1D e 2D"
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "não é um UUID com 128 bits"
@ -3118,10 +3221,6 @@ msgstr "nem todos os argumentos são convertidos durante a formatação da strin
msgid "not enough arguments for format string"
msgstr "argumentos insuficientes para o formato da string"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr "a quantidade dos argumentos deve ser 2 ou 3"
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr "a quantidade dos pontos deve ser pelo menos 2"
@ -3174,6 +3273,10 @@ msgstr "é necessário objeto com protocolo do buffer"
msgid "odd-length string"
msgstr "sequência com comprimento ímpar"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr "o offset é muito grande"
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "desvio fora dos limites"
@ -3197,6 +3300,14 @@ msgstr ""
msgid "operands could not be broadcast together"
msgstr "os operandos não puderam ser transmitidos juntos"
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr "A operação é implementada apenas para matrizes booleanas 1D"
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr "a operação não é implementada para a matriz achatada"
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "a operação não foi implementada nos ndarrays"
@ -3291,6 +3402,7 @@ msgstr "O terceiro argumento pow() não pode ser 0"
msgid "pow() with 3 arguments requires integers"
msgstr "o pow() com 3 argumentos requer números inteiros"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3334,6 +3446,10 @@ msgstr "importação relativa"
msgid "requested length %d but object has length %d"
msgstr "o comprimento solicitado %d, porém o objeto tem comprimento %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr "os resultados não podem ser lançados para um determinado tipo"
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "a anotação do retorno deve ser um identificador"
@ -3352,9 +3468,9 @@ msgstr "rgb_pins[%d] duplica outra atribuição dos pinos"
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] não está na mesma porta que o clock"
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr "o lado direito deve ser um ndarray ou um escalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr "argumento de enrolar deve ser um ndarray"
#: py/objstr.c
msgid "rsplit(None,n)"
@ -3381,8 +3497,8 @@ msgid "script compilation not supported"
msgstr "compilação de script não suportada"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr "a forma deve ser uma tupla de 2"
msgid "shape must be a tuple"
msgstr "a forma deve ser uma tupla"
#: py/objstr.c
msgid "sign not allowed in string format specifier"
@ -3424,10 +3540,6 @@ msgstr "reinicialização soft\n"
msgid "sort argument must be an ndarray"
msgstr "o argumento da classificação deve ser um ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr "o eixo ordenado não pode ser maior do que 65535"
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr "o sos da matriz deve estar na forma (n_section, 6)"
@ -3508,6 +3620,7 @@ msgstr "Limite deve estar no alcance de 0-65536"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() leva uma sequência com 9"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr "a duração do tempo limite excedeu o valor máximo suportado"
@ -3532,6 +3645,10 @@ msgstr "o tempo limite na espera pelo cartão v2"
msgid "timestamp out of range for platform time_t"
msgstr "timestamp fora do intervalo para a plataforma time_t"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr "os tobytes podem ser invocados apenas nas matrizes densas"
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "Muitos argumentos fornecidos com o formato dado"
@ -3549,6 +3666,10 @@ msgstr "valores demais para descompactar (esperado %d)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr "o trapz está definido para 1D arrays de igual tamanho"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "o índice da tupla está fora do intervalo"
@ -3691,6 +3812,14 @@ msgstr "o value_count deve ser > 0"
msgid "vectors must have same lengths"
msgstr "os vetores devem ter os mesmos comprimentos"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr "o watchdog não foi inicializado"
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr "o tempo limite do watchdog deve ser maior que 0"
@ -3703,13 +3832,13 @@ msgstr "a largura deve ser maior que zero"
msgid "window must be <= interval"
msgstr "a janela deve ser <= intervalo"
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "tipo do argumento errado"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr "índice do eixo errado"
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "tipo do índice errado"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr "um eixo errado foi definido"
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3759,6 +3888,55 @@ msgstr "zi deve ser de um tipo float"
msgid "zi must be of shape (n_section, 2)"
msgstr "zi deve estar na forma (n_section, 2)"
#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
#~ msgstr "São suportados apenas soquetes IPv4 SOCK_STREAM"
#~ msgid "arctan2 is implemented for scalars and ndarrays only"
#~ msgstr "O arctan2 está implementado apenas para escalares e ndarrays"
#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "o eixo deve ser -1, 0, Nenhum ou 1"
#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "o eixo deve ser -1, 0 ou 1"
#~ msgid "axis must be None, 0, or 1"
#~ msgstr "o eixo deve ser Nenhum, 0 ou 1"
#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr ""
#~ "não é possível remodelar a matriz (formato de entrada/saída incompatível)"
#~ msgid "could not broadast input array from shape"
#~ msgstr "não foi possível transmitir a matriz da entrada a partir da forma"
#~ msgid "ddof must be smaller than length of data set"
#~ msgstr "O ddof deve ser menor que o comprimento do conjunto dos dados"
#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr "A função foi implementada apenas para escalares e ndarrays"
#~ msgid "n must be between 0, and 9"
#~ msgstr "n deve estar entre 0 e 9"
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "a quantidade dos argumentos deve ser 2 ou 3"
#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "o lado direito deve ser um ndarray ou um escalar"
#~ msgid "shape must be a 2-tuple"
#~ msgstr "a forma deve ser uma tupla de 2"
#~ msgid "sorted axis can't be longer than 65535"
#~ msgstr "o eixo ordenado não pode ser maior do que 65535"
#~ msgid "wrong argument type"
#~ msgstr "tipo do argumento errado"
#~ msgid "wrong index type"
#~ msgstr "tipo do índice errado"
#~ msgid "specify size or data, but not both"
#~ msgstr "defina o tamanho ou os dados, porém não ambos"

View File

@ -5,8 +5,8 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-11-05 20:26+0000\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-11-30 18:06+0000\n"
"Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: sv\n"
@ -14,7 +14,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Weblate 4.3.2\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -300,9 +300,11 @@ msgstr "All I2C-kringutrustning används"
msgid "All I2C peripherals are in use"
msgstr "All I2C-kringutrustning används"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
msgstr "Alla PCNT-enheter används"
#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/esp32s2/common-hal/canio/Listener.c
@ -336,6 +338,7 @@ msgstr "Alla timers för denna pinne är i bruk"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -435,6 +438,11 @@ msgstr "Under minsta bildfrekvens"
msgid "Bit clock and word select must share a clock unit"
msgstr "Bitklocka och ordval måste dela en klockenhet"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr "Bitdjup måste vara inom 1 till 6, inte %d"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Bitdjup måste vara multipel av 8."
@ -496,7 +504,8 @@ msgstr "Buffertlängd måste vara en multipel av 512"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Bufferten måste vara en multipel av 512 byte"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Bufferten måste ha minst längd 1"
@ -848,6 +857,10 @@ msgstr "Förväntade en UUID"
msgid "Expected an Address"
msgstr "Förväntade en adress"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -861,6 +874,10 @@ msgstr "Utökad annonsering i kombination med skanningssvar stöds inte."
msgid "FFT is defined for ndarrays only"
msgstr "FFT är enbart definierade för ndarrays"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr "FTT är enbart implementerad för linjära matriser"
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr "Misslyckad SSL-handskakning"
@ -989,6 +1006,10 @@ msgstr "I2C init-fel"
msgid "I2SOut not available"
msgstr "I2SOut är inte tillgängligt"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1006,6 +1027,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "Fel buffertstorlek"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr "Initieringen misslyckades på grund av minnesbrist"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "Indata tar för lång tid"
@ -1086,6 +1111,7 @@ msgid "Invalid byteorder string"
msgstr "Ogiltig byteorder-sträng"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Ogiltig inspelningsperiod. Giltigt intervall: 1 - 500"
@ -1263,6 +1289,10 @@ msgstr "Måste ange MISO- eller MOSI-pinne"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Måste använda ett multipel av 6 rgb-pinnar, inte %d"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr "NVS-fel"
#: py/parse.c
msgid "Name too long"
msgstr "Name är för långt"
@ -1281,6 +1311,11 @@ msgstr "Ingen DAC på chipet"
msgid "No DMA channel found"
msgstr "Ingen DMA-kanal hittades"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1415,14 +1450,14 @@ msgstr "Udda paritet stöds inte"
msgid "Only 8 or 16 bit mono with "
msgstr "Endast 8 eller 16 bitars mono med "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr "Endast IPv4 SOCK_STREAM sockets stöds"
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Endast IPv4-adresser stöds"
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr "Endast IPv4-socket stöds"
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1439,6 +1474,10 @@ msgstr ""
"Endast monokrom, indexerad 4 bpp eller 8 bpp och 16 bpp eller högre BMP: er "
"stöds: %d bpp angiven"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr "Bara en färg kan vara genomskinlig i taget"
@ -1498,6 +1537,10 @@ msgstr "Pinnen måste stödja hårdvaruavbrott"
msgid "Pin number already reserved by EXTI"
msgstr "PInn-nummer redan reserverat av EXTI"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1567,7 +1610,7 @@ msgstr "RS485-inversion specificerad när den inte är i RS485-läge"
msgid "RTC calibration is not supported on this board"
msgstr "RTC-kalibrering stöds inte av detta kort"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "RTC stöds inte av detta kort"
@ -1713,6 +1756,10 @@ msgstr "Stream saknar readinto() eller write() metod."
msgid "Supply at least one UART pin"
msgstr "Ange minst en UART-pinne"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr "Systeminträdet måste vara gnss. SatellitSystem"
@ -1784,6 +1831,10 @@ msgstr "Tile-värde utanför intervall"
msgid "Tile width must exactly divide bitmap width"
msgstr "Tile-bredd måste vara jämnt delbar med bredd på bitmap"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1983,7 +2034,7 @@ msgstr "Avläsning av spänning tog för lång tid"
msgid "WARNING: Your code filename has two extensions\n"
msgstr "VARNING: Ditt filnamn för kod har två tillägg\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr "WatchDogTimer kan inte avinitialiseras när läget är inställt på RESET"
@ -2068,10 +2119,6 @@ msgstr "adress utanför gränsen"
msgid "addresses is empty"
msgstr "adresserna är tomma"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr "arctan2 är enbart implementerad för scalar och ndarray"
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "arg är en tom sekvens"
@ -2080,6 +2127,10 @@ msgstr "arg är en tom sekvens"
msgid "argsort argument must be an ndarray"
msgstr "argumentet argsort måste vara en ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr "argsort är inte implementerad för tillplattade matriser"
#: py/runtime.c
msgid "argument has wrong type"
msgstr "argumentet har fel typ"
@ -2097,14 +2148,22 @@ msgstr "argument antal/typ matchar inte"
msgid "argument should be a '%q' not a '%q'"
msgstr "argumentet skall vara en '%q', inte en '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "argumenten måste vara ndarray"
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr "array och indexlängd måste vara lika"
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "array/bytes krävs på höger sida"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr "försök att läsa (arg)min/(arg)max av tom sekvens"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr "försök att få argmin/argmax för en tom sekvens"
@ -2114,16 +2173,16 @@ msgid "attributes not supported yet"
msgstr "attribut stöds inte än"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr "axis ska vara -1, 0, None eller 1"
msgid "axis is out of bounds"
msgstr "axis är utanför gränsen"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr "axis ska vara -1, 0 eller 1"
msgid "axis must be None, or an integer"
msgstr "axis måste vara None eller ett heltal"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgstr "axis ska vara None, 0, eller 1"
msgid "axis too long"
msgstr "axis för lång"
#: py/builtinevex.c
msgid "bad compile mode"
@ -2328,6 +2387,10 @@ msgid ""
msgstr ""
"kan inte byta från manuell fältspecifikation till automatisk fältnumrering"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr "kan inte casta utdata med regel"
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "kan inte skapa instanser av '%q'"
@ -2344,10 +2407,6 @@ msgstr "kan inte importera namn %q"
msgid "cannot perform relative import"
msgstr "kan inte utföra relativ import"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr "kan inte omforma matris (inkompatibel indata-/utdataform)"
#: py/emitnative.c
msgid "casting"
msgstr "casting inte implementerad"
@ -2420,10 +2479,6 @@ msgstr "Argumenten convolve måste vara ndarray:er"
msgid "convolve arguments must not be empty"
msgstr "Argumenten convolve kan inte vara tomma"
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr "Kan inte sända indatamatris från form"
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "kan inte invertera Vandermonde-matris"
@ -2432,6 +2487,10 @@ msgstr "kan inte invertera Vandermonde-matris"
msgid "couldn't determine SD card version"
msgstr "kan inte avgöra SD-kortversion"
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr "cross är definierad för 1D-matriser med längd 3"
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr "data måste vara itererbar"
@ -2440,10 +2499,6 @@ msgstr "data måste vara itererbar"
msgid "data must be of equal length"
msgstr "data måste vara av samma längd"
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr "ddof måste vara mindre än längden på datauppsättningen"
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "decimaltal stöds inte"
@ -2476,6 +2531,10 @@ msgstr "uppdateringssekvensen för dict har fel längd"
msgid "diff argument must be an ndarray"
msgstr "argumentet diff måste vara en ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr "differentieringsordning utanför intervallet"
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2505,6 +2564,10 @@ msgstr "slut på format vid sökning efter konverteringsspecificerare"
msgid "end_x should be an int"
msgstr "color ska vara en int"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2591,6 +2654,10 @@ msgstr "första argumentet måste vara en callable"
msgid "first argument must be a function"
msgstr "första argumentet måste vara en funktion"
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr "första argumentet måste vara en tupel av ndarray"
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "första argumentet måste vara en iterable"
@ -2644,9 +2711,9 @@ msgstr "funktionen fick flera värden för argumentet '%q'"
msgid "function has the same sign at the ends of interval"
msgstr "funktionen har samma teckenvärden vid slutet av intervall"
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr "funktionen är endast implementerad för scalar och ndarray"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr "funktionen är enbart definierad för ndarray"
#: py/argcheck.c
#, c-format
@ -2715,6 +2782,7 @@ msgstr "felaktig utfyllnad"
msgid "index is out of bounds"
msgstr "index är utanför gränserna"
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index utanför intervallet"
@ -2739,6 +2807,10 @@ msgstr "initial_value-längd är fel"
msgid "inline assembler must be a function"
msgstr "inline assembler måste vara en funktion"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr "indata- och utdataformer är inte kompatibla"
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr "indataargumentet måste vara ett heltal eller en 2-tupel"
@ -2747,6 +2819,10 @@ msgstr "indataargumentet måste vara ett heltal eller en 2-tupel"
msgid "input array length must be power of 2"
msgstr "indataarraylängden måste vara en multipel av 2"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr "indatamatriser är inte kompatibla"
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr "indata måste vara en iterable"
@ -2759,6 +2835,22 @@ msgstr "indatamatrisen är asymmetrisk"
msgid "input matrix is singular"
msgstr "indatamatrisen är singulär"
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr "indata måste vara en dense ndarray"
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr "indata måste vara en tensor av rank 2"
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr "indata måste vara en ndarray"
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr "indata måste vara endimensionell"
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "indata måste vara kvadratmatris"
@ -2771,6 +2863,10 @@ msgstr "indata måste vara tupel, lista, range, eller ndarray"
msgid "input vectors must be of equal length"
msgstr "indatavektorer måste ha samma längd"
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr "indata är inte iterbara"
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "int() arg 2 måste vara >= 2 och <= 36"
@ -2841,6 +2937,10 @@ msgstr "ogiltig syntax för heltal med bas %d"
msgid "invalid syntax for number"
msgstr "ogiltig syntax för tal"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass() arg 1 måste vara en klass"
@ -2942,6 +3042,10 @@ msgstr "max_length måste vara 0-%d när fixed_length är %s"
msgid "max_length must be > 0"
msgstr "max_length måste vara > 0"
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr "maximalt antal dimensioner är 4"
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "maximal rekursionsdjup överskriden"
@ -2991,10 +3095,6 @@ msgstr "måste ge ett objekt"
msgid "must use keyword argument for key function"
msgstr "måste använda nyckelordsargument för nyckelfunktion"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr "n måste vara mellan 0 och 9"
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "namnet '%q' är inte definierat"
@ -3077,6 +3177,10 @@ msgstr "icke nyckelord arg efter * / **"
msgid "non-keyword arg after keyword arg"
msgstr "icke nyckelord arg efter nyckelord arg"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr "norm är definierad för 1D- och 2D-matriser"
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "inte en 128-bitars UUID"
@ -3089,10 +3193,6 @@ msgstr "inte alla argument omvandlade under strängformatering"
msgid "not enough arguments for format string"
msgstr "inte tillräckligt med argument för formatsträng"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr "antal argument måste vara 2 eller 3"
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr "antal punkter måste vara minst 2"
@ -3145,6 +3245,10 @@ msgstr "objekt med buffertprotokoll krävs"
msgid "odd-length string"
msgstr "sträng har udda längd"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr "offset är för stor"
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "offset utanför gränserna"
@ -3167,6 +3271,14 @@ msgstr "endast segment med steg=1 (aka Ingen) stöds"
msgid "operands could not be broadcast together"
msgstr "operander kan inte sändas tillsammans"
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr "operationen är enbart implementerad för 1D Boolean-matriser"
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr "operationen inte implementeras för tillplattad matris"
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "åtgärden är inte implementerad för ndarray:er"
@ -3258,6 +3370,7 @@ msgstr "pow() 3: e argument kan inte vara 0"
msgid "pow() with 3 arguments requires integers"
msgstr "pow() med 3 argument kräver heltal"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3301,6 +3414,10 @@ msgstr "relativ import"
msgid "requested length %d but object has length %d"
msgstr "begärd längd %d men objektet har längden %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr "resultaten kan inte castas till angiven typ"
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "retur-annotation måste vara en identifierare"
@ -3319,9 +3436,9 @@ msgstr "rgb_pins[%d] duplicerar en annan pinntilldelning"
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] är inte på samma port som en klocka"
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr "höger sida måste vara en ndarray, eller en scalar"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr "argumentet roll måste vara en ndarray"
#: py/objstr.c
msgid "rsplit(None,n)"
@ -3348,8 +3465,8 @@ msgid "script compilation not supported"
msgstr "skriptkompilering stöds inte"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr "shape måste vara en 2-tupel"
msgid "shape must be a tuple"
msgstr "shape måste vara en tuple"
#: py/objstr.c
msgid "sign not allowed in string format specifier"
@ -3391,10 +3508,6 @@ msgstr "mjuk omstart\n"
msgid "sort argument must be an ndarray"
msgstr "argumentet sort måste vara en ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr "sorterad axel kan inte vara längre än 65535"
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr "sos array måste ha form (n_section, 6)"
@ -3475,6 +3588,7 @@ msgstr "tröskelvärdet måste ligga i intervallet 0-65536"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() kräver en 9-sekvens"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr "timeout-längd överskred det maximala värde som stöds"
@ -3499,6 +3613,10 @@ msgstr "timeout för v2-kort"
msgid "timestamp out of range for platform time_t"
msgstr "timestamp utom räckvidd för plattformens \"time_t\""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr "tobyte kan enbart anropas för täta matriser"
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "för många argument för det givna formatet"
@ -3516,6 +3634,10 @@ msgstr "för många värden att packa upp (förväntat %d)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr "trapz är definierad för 1D-matriser med samma längd"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "tupelindex utanför intervallet"
@ -3658,6 +3780,14 @@ msgstr "value_count måste vara > 0"
msgid "vectors must have same lengths"
msgstr "vektorer måste ha samma längd"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr "watchdog är inte initierad"
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr "watchdog timeout måste vara större än 0"
@ -3670,13 +3800,13 @@ msgstr "width måste vara större än noll"
msgid "window must be <= interval"
msgstr "window måste vara <= interval"
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "fel typ av argument"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr "fel axelindex"
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "fel indextyp"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr "fel axel angiven"
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3726,6 +3856,54 @@ msgstr "zi måste vara av typ float"
msgid "zi must be of shape (n_section, 2)"
msgstr "zi måste vara i formen (n_section, 2)"
#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
#~ msgstr "Endast IPv4 SOCK_STREAM sockets stöds"
#~ msgid "arctan2 is implemented for scalars and ndarrays only"
#~ msgstr "arctan2 är enbart implementerad för scalar och ndarray"
#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "axis ska vara -1, 0, None eller 1"
#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "axis ska vara -1, 0 eller 1"
#~ msgid "axis must be None, 0, or 1"
#~ msgstr "axis ska vara None, 0, eller 1"
#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr "kan inte omforma matris (inkompatibel indata-/utdataform)"
#~ msgid "could not broadast input array from shape"
#~ msgstr "Kan inte sända indatamatris från form"
#~ msgid "ddof must be smaller than length of data set"
#~ msgstr "ddof måste vara mindre än längden på datauppsättningen"
#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr "funktionen är endast implementerad för scalar och ndarray"
#~ msgid "n must be between 0, and 9"
#~ msgstr "n måste vara mellan 0 och 9"
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "antal argument måste vara 2 eller 3"
#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "höger sida måste vara en ndarray, eller en scalar"
#~ msgid "shape must be a 2-tuple"
#~ msgstr "shape måste vara en 2-tupel"
#~ msgid "sorted axis can't be longer than 65535"
#~ msgstr "sorterad axel kan inte vara längre än 65535"
#~ msgid "wrong argument type"
#~ msgstr "fel typ av argument"
#~ msgid "wrong index type"
#~ msgstr "fel indextyp"
#~ msgid "specify size or data, but not both"
#~ msgstr "ange storlek eller data, men inte båda"

View File

@ -6,8 +6,8 @@ msgid ""
msgstr ""
"Project-Id-Version: circuitpython-cn\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-04 21:18+0530\n"
"PO-Revision-Date: 2020-10-28 21:45+0000\n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-11-19 01:28+0000\n"
"Last-Translator: hexthat <hexthat@gmail.com>\n"
"Language-Team: Chinese Hanyu Pinyin\n"
"Language: zh_Latn_pinyin\n"
@ -15,7 +15,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 4.3.2-dev\n"
"X-Generator: Weblate 4.4-dev\n"
#: main.c
msgid ""
@ -302,9 +302,11 @@ msgstr "suǒ yǒu CAN wài shè dōu zài shǐ yòng zhōng"
msgid "All I2C peripherals are in use"
msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng"
#: ports/esp32s2/peripherals/pcnt_handler.c
#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr ""
msgstr "suǒ yǒu zhèng zài shǐ yòng zhōng de PCNT dān yuán"
#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/esp32s2/common-hal/canio/Listener.c
@ -338,6 +340,7 @@ msgstr "Cǐ yǐn jiǎo de suǒyǒu jìshí qì zhèngzài shǐyòng"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
@ -437,6 +440,11 @@ msgstr "Dī yú zuìdī zhèng sùlǜ"
msgid "Bit clock and word select must share a clock unit"
msgstr "Bǐtè shízhōng hé dānzì xuǎnzé bìxū gòngxiǎng shízhōng dānwèi"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr "wèi shēn dù bì xū bāo hán 1 dào 6 ér bù shì %d"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Bǐtè shēndù bìxū shì 8 bèi yǐshàng."
@ -498,7 +506,8 @@ msgstr "Huǎn chōng qū cháng dù bì xū wéi 512 de bèi shù"
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Huǎn chōng qū bì xū shì 512 zì jié de bèi shù"
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Huǎnchōng qū bìxū zhìshǎo chángdù 1"
@ -846,6 +855,10 @@ msgstr "Yùqí UUID"
msgid "Expected an Address"
msgstr "Qídài yīgè dìzhǐ"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
@ -859,6 +872,10 @@ msgstr "Bù zhīchí dài yǒu sǎomiáo xiǎngyìng de kuòzhǎn guǎngbò."
msgid "FFT is defined for ndarrays only"
msgstr "FFT jǐn wéi ndarrays dìng yì"
#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr "SSL wòshǒu shībài"
@ -987,6 +1004,10 @@ msgstr "I2C chūshǐhuà cuòwù"
msgid "I2SOut not available"
msgstr "I2SOut bù kě yòng"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
@ -1004,6 +1025,10 @@ msgstr ""
msgid "Incorrect buffer size"
msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr "yóu yú nèi cún bù zú, chū shǐ huà shī bài"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "Shūrù shíjiānguò zhǎng"
@ -1084,6 +1109,7 @@ msgid "Invalid byteorder string"
msgstr "Wúxiào de zì jié shùnxù zìfú chuàn"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Wúxiào de bǔhuò zhōuqí. Yǒuxiào fànwéi: 1-500"
@ -1260,6 +1286,10 @@ msgstr "Bìxū tígōng MISO huò MOSI yǐn jiǎo"
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "bì xū shǐ yòng 6 RGB yǐn jiǎo de bèi shù, ér bù shì %d"
#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr "Míngchēng tài zhǎng"
@ -1278,6 +1308,11 @@ msgstr "Méiyǒu DAC zài xīnpiàn shàng de"
msgid "No DMA channel found"
msgstr "Wèi zhǎodào DMA píndào"
#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""
#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
@ -1411,14 +1446,14 @@ msgstr "Bù zhīchí jīshù"
msgid "Only 8 or 16 bit mono with "
msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi "
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 SOCK_STREAM sockets supported"
msgstr "Jǐn zhīchí IPv4 SOCK_STREAM tào jiē zì"
#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Jǐn zhīchí IPv4 dìzhǐ"
#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
@ -1436,6 +1471,10 @@ msgstr ""
"Jǐn zhīchí dān sè, suǒyǐn wéi 4bpp huò 8bpp yǐjí 16bpp huò gèng gāo de BMP: "
"Gěi chū %d bpp"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr "Yīcì zhǐ néng yǒuyī zhǒng yánsè shì tòumíng de"
@ -1494,6 +1533,10 @@ msgstr "Yǐn jiǎo bìxū zhīchí yìngjiàn zhōngduàn"
msgid "Pin number already reserved by EXTI"
msgstr "Zhēn hào yǐ bèi EXTI bǎoliú"
#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
@ -1559,7 +1602,7 @@ msgstr "Wèi chǔyú RS485 móshì shí zhǐdìngle RS485 fǎn zhuǎn"
msgid "RTC calibration is not supported on this board"
msgstr "Cǐ bǎn bù zhīchí RTC jiàozhǔn"
#: shared-bindings/time/__init__.c
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "Cǐ bǎn bù zhīchí RTC"
@ -1705,6 +1748,10 @@ msgstr "Liú quēshǎo readinto() huò write() fāngfǎ."
msgid "Supply at least one UART pin"
msgstr "Dìngyì zhìshǎo yīgè UART yǐn jiǎo"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr "Xìtǒng tiáomù bìxū shì gnss.SatelliteSystem"
@ -1775,6 +1822,10 @@ msgstr "Píng pū zhí chāochū fànwéi"
msgid "Tile width must exactly divide bitmap width"
msgstr "Píng pū kuāndù bìxū huàfēn wèi tú kuāndù"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
@ -1974,7 +2025,7 @@ msgstr "Diànyā dòu qǔ chāoshí"
msgid "WARNING: Your code filename has two extensions\n"
msgstr "Jǐnggào: Nǐ de dàimǎ wénjiàn míng yǒu liǎng gè kuòzhǎn míng\n"
#: shared-bindings/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr "Yīdàn jiāng móshì shèzhì wèi RESET, jiù wúfǎ chūshǐhuà WatchDog Timer"
@ -2060,10 +2111,6 @@ msgstr "dìzhǐ chāochū biānjiè"
msgid "addresses is empty"
msgstr "dìzhǐ wèi kōng"
#: extmod/ulab/code/vector/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr "arctan2 jǐn zhēnduì biāoliàng hé ndarray shíxiàn"
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "cānshù shì yīgè kōng de xùliè"
@ -2072,6 +2119,10 @@ msgstr "cānshù shì yīgè kōng de xùliè"
msgid "argsort argument must be an ndarray"
msgstr "argsort cānshù bìxū shì ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr "cānshù lèixíng cuòwù"
@ -2089,14 +2140,22 @@ msgstr "cānshù biānhào/lèixíng bù pǐpèi"
msgid "argument should be a '%q' not a '%q'"
msgstr "cānshù yīnggāi shì '%q', 'bùshì '%q'"
#: extmod/ulab/code/linalg/linalg.c
#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "cānshù bìxū shì ndarrays"
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "yòu cè xūyào shùzǔ/zì jié"
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr "chángshì huòqǔ kōng xùliè de argmin/ argmax"
@ -2106,16 +2165,16 @@ msgid "attributes not supported yet"
msgstr "shǔxìng shàngwèi zhīchí"
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr "zhóu bìxū wèi-1,0, wú huò 1"
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr "zhóu bìxū wèi-1,0 huò 1"
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, 0, or 1"
msgstr "zhóu bìxū wèi None,0 huò 1"
msgid "axis too long"
msgstr ""
#: py/builtinevex.c
msgid "bad compile mode"
@ -2318,6 +2377,10 @@ msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr "wúfǎ cóng shǒudòng zìduàn guīgé qiēhuàn dào zìdòng zìduàn biānhào"
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "wúfǎ chuàngjiàn '%q' ' shílì"
@ -2334,10 +2397,6 @@ msgstr "wúfǎ dǎorù míngchēng %q"
msgid "cannot perform relative import"
msgstr "wúfǎ zhíxíng xiāngguān dǎorù"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr "wúfǎ zhěngxíng shùzǔ (bù jiānróng de shūrù/shūchū xíngzhuàng)"
#: py/emitnative.c
msgid "casting"
msgstr "tóuyǐng"
@ -2413,10 +2472,6 @@ msgstr "juàn jī cānshù bìxū shì ndarrays"
msgid "convolve arguments must not be empty"
msgstr "juàn jī cān shǔ bùnéng wéi kōng"
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr "wúfǎ guǎngbò xíngzhuàng de shūrù shùzǔ"
#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "wúfǎ fǎn zhuǎn fàndéméng dé jǔzhèn"
@ -2425,6 +2480,10 @@ msgstr "wúfǎ fǎn zhuǎn fàndéméng dé jǔzhèn"
msgid "couldn't determine SD card version"
msgstr "wúfǎ quèdìng SD kǎ bǎnběn"
#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr "shùjù bìxū shì kě diédài de"
@ -2433,10 +2492,6 @@ msgstr "shùjù bìxū shì kě diédài de"
msgid "data must be of equal length"
msgstr "shùjù chángdù bìxū xiāngděng"
#: extmod/ulab/code/numerical/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr "ddof bìxū xiǎoyú shùjù jí de chángdù"
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "bù zhīchí xiǎoshù shù"
@ -2468,6 +2523,10 @@ msgstr "yǔfǎ gēngxīn xùliè de chángdù cuòwù"
msgid "diff argument must be an ndarray"
msgstr "bùtóng de cānshù bìxū shì ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
@ -2497,6 +2556,10 @@ msgstr "xúnzhǎo zhuǎnhuàn biāozhù géshì de jiéshù"
msgid "end_x should be an int"
msgstr "jiéwěi_x yīnggāi shì yīgè zhěngshù"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
@ -2583,6 +2646,10 @@ msgstr "dì yī gè cānshù bìxū shì kě tiáo yòng de"
msgid "first argument must be a function"
msgstr "dì yīgè cānshù bìxū shì yī gè hánshù"
#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "dì yī gè cānshù bìxū shì kě diédài de"
@ -2636,9 +2703,9 @@ msgstr "hánshù huòdé cānshù '%q' de duōchóng zhí"
msgid "function has the same sign at the ends of interval"
msgstr "hánshù zài jiàngé mòwěi jùyǒu xiāngtóng de fúhào"
#: extmod/ulab/code/compare/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr "gāi hánshù jǐn zhēnduì biāoliàng hé ndarray shíxiàn"
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
@ -2707,6 +2774,7 @@ msgstr "bù zhèngquè de tiánchōng"
msgid "index is out of bounds"
msgstr "suǒyǐn chāochū fànwéi"
#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "suǒyǐn chāochū fànwéi"
@ -2731,6 +2799,10 @@ msgstr "Initial_value chángdù cuòwù"
msgid "inline assembler must be a function"
msgstr "nèi lián jíhé bìxū shì yīgè hánshù"
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr "shūrù cānshù bìxū shì zhěngshù huò 2 yuán zǔ"
@ -2739,6 +2811,10 @@ msgstr "shūrù cānshù bìxū shì zhěngshù huò 2 yuán zǔ"
msgid "input array length must be power of 2"
msgstr "shūrù shùzǔ de chángdù bìxū shì 2 de mì"
#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr "shūrù shùjù bìxū shì kě diédài de"
@ -2751,6 +2827,22 @@ msgstr "shūrù jǔzhèn bù duìchèn"
msgid "input matrix is singular"
msgstr "shūrù jǔzhèn shì qíyì de"
#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr ""
#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "shūrù bìxū wèi fāng jǔzhèn"
@ -2763,6 +2855,10 @@ msgstr "shūrù bìxū shì yuán zǔ, lièbiǎo, fànwéi huò ndarray"
msgid "input vectors must be of equal length"
msgstr "shūrù xiàngliàng de chángdù bìxū xiāngděng"
#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "zhěngshù() cānshù 2 bìxū > = 2 qiě <= 36"
@ -2833,6 +2929,10 @@ msgstr "jīshù wèi %d de zhěng shǔ de yǔfǎ wúxiào"
msgid "invalid syntax for number"
msgstr "wúxiào de hàomǎ yǔfǎ"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass() cānshù 1 bìxū shì yīgè lèi"
@ -2932,6 +3032,10 @@ msgstr "Dāng gùdìng chángdù wèi %s shí, zuìdà chángdù bìxū wèi 0-%
msgid "max_length must be > 0"
msgstr "Max_length bìxū > 0"
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "chāochū zuìdà dìguī shēndù"
@ -2981,10 +3085,6 @@ msgstr "bìxū tíchū duìxiàng"
msgid "must use keyword argument for key function"
msgstr "bìxū shǐyòng guānjiàn cí cānshù"
#: extmod/ulab/code/numerical/numerical.c
msgid "n must be between 0, and 9"
msgstr "n bìxū jiè yú 0 dào 9 zhī jiān"
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "míngchēng '%q' wèi dìngyì"
@ -3067,6 +3167,10 @@ msgstr "zài */** zhīhòu fēi guānjiàn cí cānshù"
msgid "non-keyword arg after keyword arg"
msgstr "guānjiàn zì cānshù zhīhòu de fēi guānjiàn zì cānshù"
#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "bùshì 128 wèi UUID"
@ -3079,10 +3183,6 @@ msgstr "bùshì zì chuàn géshì huà guòchéng zhōng zhuǎnhuàn de suǒyǒ
msgid "not enough arguments for format string"
msgstr "géshì zìfú chuàn cān shǔ bùzú"
#: extmod/ulab/code/poly/poly.c
msgid "number of arguments must be 2, or 3"
msgstr "cānshù shùliàng bìxū wèi 2 huò 3"
#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr "diǎnshù bìxū zhìshǎo wèi 2"
@ -3135,6 +3235,10 @@ msgstr "xūyào huǎnchōng qū xiéyì de duìxiàng"
msgid "odd-length string"
msgstr "jīshù zìfú chuàn"
#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "piānlí biānjiè"
@ -3157,6 +3261,14 @@ msgstr "jǐn zhīchí bù zhǎng = 1(jí wú) de qiēpiàn"
msgid "operands could not be broadcast together"
msgstr "cāozuò shǔ bùnéng yīqǐ guǎngbò"
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""
#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "cāozuò wèi zài ndarrays shàng shíxiàn"
@ -3247,6 +3359,7 @@ msgstr "pow() 3 cān shǔ bùnéng wéi 0"
msgid "pow() with 3 arguments requires integers"
msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@ -3290,6 +3403,10 @@ msgstr "xiāngduì dǎorù"
msgid "requested length %d but object has length %d"
msgstr "qǐngqiú chángdù %d dàn duìxiàng chángdù %d"
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "fǎnhuí zhùshì bìxū shì biāozhì fú"
@ -3308,9 +3425,9 @@ msgstr "rgb_pins[%d] fùzhì lìng yīgè yǐn jiǎo fēnpèi"
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] yǔ shízhōng bùzài tóng yīgè duānkǒu shàng"
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr "yòubiān bìxū shì ndarray huò biāoliàng"
#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
msgid "rsplit(None,n)"
@ -3337,8 +3454,8 @@ msgid "script compilation not supported"
msgstr "bù zhīchí jiǎoběn biānyì"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr "xíngzhuàng bìxū shì 2 yuán zǔ"
msgid "shape must be a tuple"
msgstr ""
#: py/objstr.c
msgid "sign not allowed in string format specifier"
@ -3380,10 +3497,6 @@ msgstr "ruǎn chóngqǐ\n"
msgid "sort argument must be an ndarray"
msgstr "páixù cānshù bìxū shì ndarray"
#: extmod/ulab/code/numerical/numerical.c
msgid "sorted axis can't be longer than 65535"
msgstr "pái xù zhóu bù néng chāo guò 65535"
#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr "sos shùzǔ de xíngzhuàng bìxū wèi (n_section, 6)"
@ -3464,6 +3577,7 @@ msgstr "yùzhí bìxū zài fànwéi 0-65536"
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() xūyào 9 xùliè"
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr "chāoshí shíjiān chāoguò zuìdà zhīchí zhí"
@ -3488,6 +3602,10 @@ msgstr "děngdài v2 kǎ chāoshí"
msgid "timestamp out of range for platform time_t"
msgstr "time_t shíjiān chuō chāochū píngtái fànwéi"
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "tígōng jǐ dìng géshì de cānshù tài duō"
@ -3505,6 +3623,10 @@ msgstr "dǎkāi tài duō zhí (yùqí %d)"
msgid "trapz is defined for 1D arrays of equal length"
msgstr "Trapz shì wèi děng zhǎng de 1D shùzǔ dìngyì de"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""
#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "yuán zǔ suǒyǐn chāochū fànwéi"
@ -3647,6 +3769,14 @@ msgstr "zhí jìshù bìxū wèi > 0"
msgid "vectors must have same lengths"
msgstr "xiàngliàng bìxū jùyǒu xiāngtóng de chángdù"
#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""
#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr "wèi chū shǐ huà jiān shì qì"
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr "kān mén gǒu chāoshí bìxū dàyú 0"
@ -3659,13 +3789,13 @@ msgstr "kuāndù bìxū dàyú líng"
msgid "window must be <= interval"
msgstr "Chuāngkǒu bìxū shì <= jiàngé"
#: extmod/ulab/code/linalg/linalg.c
msgid "wrong argument type"
msgstr "cuòwù de cānshù lèixíng"
#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr "cuòwù de suǒyǐn lèixíng"
#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
@ -3715,6 +3845,54 @@ msgstr "zi bìxū wèi fú diǎn xíng"
msgid "zi must be of shape (n_section, 2)"
msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
#~ msgstr "Jǐn zhīchí IPv4 SOCK_STREAM tào jiē zì"
#~ msgid "arctan2 is implemented for scalars and ndarrays only"
#~ msgstr "arctan2 jǐn zhēnduì biāoliàng hé ndarray shíxiàn"
#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "zhóu bìxū wèi-1,0, wú huò 1"
#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "zhóu bìxū wèi-1,0 huò 1"
#~ msgid "axis must be None, 0, or 1"
#~ msgstr "zhóu bìxū wèi None,0 huò 1"
#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr "wúfǎ zhěngxíng shùzǔ (bù jiānróng de shūrù/shūchū xíngzhuàng)"
#~ msgid "could not broadast input array from shape"
#~ msgstr "wúfǎ guǎngbò xíngzhuàng de shūrù shùzǔ"
#~ msgid "ddof must be smaller than length of data set"
#~ msgstr "ddof bìxū xiǎoyú shùjù jí de chángdù"
#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr "gāi hánshù jǐn zhēnduì biāoliàng hé ndarray shíxiàn"
#~ msgid "n must be between 0, and 9"
#~ msgstr "n bìxū jiè yú 0 dào 9 zhī jiān"
#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "cānshù shùliàng bìxū wèi 2 huò 3"
#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "yòubiān bìxū shì ndarray huò biāoliàng"
#~ msgid "shape must be a 2-tuple"
#~ msgstr "xíngzhuàng bìxū shì 2 yuán zǔ"
#~ msgid "sorted axis can't be longer than 65535"
#~ msgstr "pái xù zhóu bù néng chāo guò 65535"
#~ msgid "wrong argument type"
#~ msgstr "cuòwù de cānshù lèixíng"
#~ msgid "wrong index type"
#~ msgstr "cuòwù de suǒyǐn lèixíng"
#~ msgid "Must provide SCK pin"
#~ msgstr "bì xū tí gòng SCK yǐn jiǎo"

111
main.c
View File

@ -47,19 +47,29 @@
#include "mpconfigboard.h"
#include "supervisor/background_callback.h"
#include "supervisor/cpu.h"
#include "supervisor/filesystem.h"
#include "supervisor/memory.h"
#include "supervisor/port.h"
#include "supervisor/filesystem.h"
#include "supervisor/serial.h"
#include "supervisor/shared/autoreload.h"
#include "supervisor/shared/translate.h"
#include "supervisor/shared/rgb_led_status.h"
#include "supervisor/shared/safe_mode.h"
#include "supervisor/shared/status_leds.h"
#include "supervisor/shared/stack.h"
#include "supervisor/serial.h"
#include "supervisor/shared/status_leds.h"
#include "supervisor/shared/translate.h"
#include "supervisor/shared/workflow.h"
#include "supervisor/usb.h"
#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/microcontroller/Processor.h"
#include "shared-bindings/supervisor/Runtime.h"
#include "boards/board.h"
#if CIRCUITPY_ALARM
#include "shared-bindings/alarm/__init__.h"
#endif
#if CIRCUITPY_DISPLAYIO
#include "shared-module/displayio/__init__.h"
#endif
@ -85,26 +95,6 @@
#include "common-hal/canio/CAN.h"
#endif
void do_str(const char *src, mp_parse_input_kind_t input_kind) {
mp_lexer_t *lex = mp_lexer_new_from_str_len(MP_QSTR__lt_stdin_gt_, src, strlen(src), 0);
if (lex == NULL) {
//printf("MemoryError: lexer could not allocate memory\n");
return;
}
nlr_buf_t nlr;
if (nlr_push(&nlr) == 0) {
qstr source_name = lex->source_name;
mp_parse_tree_t parse_tree = mp_parse(lex, input_kind);
mp_obj_t module_fun = mp_compile(&parse_tree, source_name, MP_EMIT_OPT_NONE, true);
mp_call_function_0(module_fun);
nlr_pop();
} else {
// uncaught exception
mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);
}
}
#if MICROPY_ENABLE_PYSTACK
static size_t PLACE_IN_DTCM_BSS(_pystack[CIRCUITPY_PYSTACK_SIZE / sizeof(size_t)]);
#endif
@ -115,23 +105,27 @@ static void reset_devices(void) {
#endif
}
void start_mp(supervisor_allocation* heap) {
STATIC void start_mp(supervisor_allocation* heap) {
reset_status_led();
autoreload_stop();
supervisor_workflow_reset();
#if CIRCUITPY_ALARM
alarm_reset();
#endif
// Stack limit should be less than real stack size, so we have a chance
// to recover from limit hit. (Limit is measured in bytes.)
mp_stack_ctrl_init();
if (stack_alloc != NULL) {
mp_stack_set_limit(stack_alloc->length - 1024);
if (stack_get_bottom() != NULL) {
mp_stack_set_limit(stack_get_length() - 1024);
}
#if MICROPY_MAX_STACK_USAGE
// _ezero (same as _ebss) is an int, so start 4 bytes above it.
if (stack_alloc != NULL) {
mp_stack_set_bottom(stack_alloc->ptr);
if (stack_get_bottom() != NULL) {
mp_stack_set_bottom(stack_get_bottom());
mp_stack_fill_with_sentinel();
}
#endif
@ -148,7 +142,7 @@ void start_mp(supervisor_allocation* heap) {
#endif
#if MICROPY_ENABLE_GC
gc_init(heap->ptr, heap->ptr + heap->length / 4);
gc_init(heap->ptr, heap->ptr + get_allocation_length(heap) / 4);
#endif
mp_init();
mp_obj_list_init(mp_sys_path, 0);
@ -166,7 +160,7 @@ void start_mp(supervisor_allocation* heap) {
#endif
}
void stop_mp(void) {
STATIC void stop_mp(void) {
#if CIRCUITPY_NETWORK
network_module_deinit();
#endif
@ -191,7 +185,7 @@ void stop_mp(void) {
// Look for the first file that exists in the list of filenames, using mp_import_stat().
// Return its index. If no file found, return -1.
const char* first_existing_file_in_list(const char * const * filenames) {
STATIC const char* first_existing_file_in_list(const char * const * filenames) {
for (int i = 0; filenames[i] != (char*)""; i++) {
mp_import_stat_t stat = mp_import_stat(filenames[i]);
if (stat == MP_IMPORT_STAT_FILE) {
@ -201,7 +195,7 @@ const char* first_existing_file_in_list(const char * const * filenames) {
return NULL;
}
bool maybe_run_list(const char * const * filenames, pyexec_result_t* exec_result) {
STATIC bool maybe_run_list(const char * const * filenames, pyexec_result_t* exec_result) {
const char* filename = first_existing_file_in_list(filenames);
if (filename == NULL) {
return false;
@ -215,7 +209,7 @@ bool maybe_run_list(const char * const * filenames, pyexec_result_t* exec_result
return true;
}
void cleanup_after_vm(supervisor_allocation* heap) {
STATIC void cleanup_after_vm(supervisor_allocation* heap) {
// Reset port-independent devices, like CIRCUITPY_BLEIO_HCI.
reset_devices();
// Turn off the display and flush the fileystem before the heap disappears.
@ -244,7 +238,7 @@ void cleanup_after_vm(supervisor_allocation* heap) {
reset_status_led();
}
void print_code_py_status_message(safe_mode_t safe_mode) {
STATIC void print_code_py_status_message(safe_mode_t safe_mode) {
if (autoreload_is_enabled()) {
serial_write_compressed(translate("Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\n"));
} else {
@ -256,7 +250,7 @@ void print_code_py_status_message(safe_mode_t safe_mode) {
}
}
bool run_code_py(safe_mode_t safe_mode) {
STATIC bool run_code_py(safe_mode_t safe_mode) {
bool serial_connected_at_start = serial_connected();
#if CIRCUITPY_AUTORELOAD_DELAY_MS > 0
if (serial_connected_at_start) {
@ -276,10 +270,12 @@ bool run_code_py(safe_mode_t safe_mode) {
if (safe_mode == NO_SAFE_MODE) {
new_status_color(MAIN_RUNNING);
static const char * const supported_filenames[] = STRING_LIST("code.txt", "code.py", "main.py", "main.txt");
static const char * const supported_filenames[] = STRING_LIST(
"code.txt", "code.py", "main.py", "main.txt");
#if CIRCUITPY_FULL_BUILD
static const char * const double_extension_filenames[] = STRING_LIST("code.txt.py", "code.py.txt", "code.txt.txt","code.py.py",
"main.txt.py", "main.py.txt", "main.txt.txt","main.py.py");
static const char * const double_extension_filenames[] = STRING_LIST(
"code.txt.py", "code.py.txt", "code.txt.txt","code.py.py",
"main.txt.py", "main.py.txt", "main.txt.txt","main.py.py");
#endif
stack_resize();
@ -295,13 +291,25 @@ bool run_code_py(safe_mode_t safe_mode) {
}
}
#endif
// TODO: on deep sleep, make sure display is refreshed before sleeping (for e-ink).
cleanup_after_vm(heap);
if (result.return_code & PYEXEC_FORCED_EXIT) {
return reload_requested;
}
#if CIRCUITPY_ALARM
if (result.return_code & PYEXEC_DEEP_SLEEP) {
common_hal_alarm_enter_deep_sleep();
// Does not return.
}
#endif
}
// Program has finished running.
// Display a different completion message if the user has no USB attached (cannot save files)
if (!serial_connected_at_start) {
serial_write_compressed(translate("\nCode done running. Waiting for reload.\n"));
@ -311,24 +319,32 @@ bool run_code_py(safe_mode_t safe_mode) {
#if CIRCUITPY_DISPLAYIO
bool refreshed_epaper_display = false;
#endif
rgb_status_animation_t animation;
prep_rgb_status_animation(&result, found_main, safe_mode, &animation);
while (true) {
RUN_BACKGROUND_TASKS;
if (reload_requested) {
supervisor_set_run_reason(RUN_REASON_AUTO_RELOAD);
reload_requested = false;
return true;
}
if (serial_connected() && serial_bytes_available()) {
// Skip REPL if reload was requested.
return (serial_read() == CHAR_CTRL_D);
bool ctrl_d = serial_read() == CHAR_CTRL_D;
if (ctrl_d) {
supervisor_set_run_reason(RUN_REASON_REPL_RELOAD);
}
return (ctrl_d);
}
if (!serial_connected_before_animation && serial_connected()) {
if (!serial_connected_at_start) {
print_code_py_status_message(safe_mode);
}
print_safe_mode_message(safe_mode);
serial_write("\n");
serial_write_compressed(translate("Press any key to enter the REPL. Use CTRL-D to reload."));
@ -351,7 +367,7 @@ bool run_code_py(safe_mode_t safe_mode) {
FIL* boot_output_file;
void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
STATIC void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
// If not in safe mode, run boot before initing USB and capture output in a
// file.
if (filesystem_present() && safe_mode == NO_SAFE_MODE && MP_STATE_VM(vfs_mount_table) != NULL) {
@ -392,8 +408,9 @@ void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
if (!skip_boot_output) {
// Wait 1.5 seconds before opening CIRCUITPY_BOOT_OUTPUT_FILE for write,
// in case power is momentary or will fail shortly due to, say a low, battery.
mp_hal_delay_ms(1500);
if (common_hal_mcu_processor_get_reset_reason() == RESET_REASON_POWER_ON) {
mp_hal_delay_ms(1500);
}
// USB isn't up, so we can write the file.
filesystem_set_internal_writable_by_usb(false);
f_open(fs, boot_output_file, CIRCUITPY_BOOT_OUTPUT_FILE, FA_WRITE | FA_CREATE_ALWAYS);
@ -429,7 +446,7 @@ void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
}
}
int run_repl(void) {
STATIC int run_repl(void) {
int exit_code = PYEXEC_FORCED_EXIT;
stack_resize();
filesystem_flush();
@ -451,9 +468,6 @@ int __attribute__((used)) main(void) {
// initialise the cpu and peripherals
safe_mode_t safe_mode = port_init();
// Init memory after the port in case the port needs to set aside memory.
memory_init();
// Turn on LEDs
init_status_leds();
rgb_led_status_init();
@ -482,6 +496,9 @@ int __attribute__((used)) main(void) {
reset_devices();
reset_board();
// This is first time we are running CircuitPython after a reset or power-up.
supervisor_set_run_reason(RUN_REASON_STARTUP);
// If not in safe mode turn on autoreload by default but before boot.py in case it wants to change it.
if (safe_mode == NO_SAFE_MODE) {
autoreload_enable();

View File

@ -19,9 +19,9 @@ SUPEROPT_GC = 0
CFLAGS_INLINE_LIMIT = 60
CIRCUITPY_GAMEPAD = 1
CIRCUITPY_BUSDEVICE = 1
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_HID
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD
#FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_ADXL34x

View File

@ -15,6 +15,7 @@ CIRCUITPY_BITBANGIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_I2CPERIPHERAL = 0
CIRCUITPY_VECTORIO = 0
CIRCUITPY_BUSDEVICE = 0
CFLAGS_INLINE_LIMIT = 60
SUPEROPT_GC = 0

View File

@ -21,7 +21,6 @@ SUPEROPT_GC = 0
CFLAGS_INLINE_LIMIT = 55
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_HID
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH

View File

@ -25,7 +25,6 @@ CFLAGS_INLINE_LIMIT = 50
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Crickit
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH

View File

@ -26,7 +26,6 @@ SUPEROPT_GC = 0
CFLAGS_INLINE_LIMIT = 55
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

View File

@ -0,0 +1,40 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
#include "common-hal/microcontroller/Pin.h"
#include "supervisor/shared/board.h"
#include "hal/include/hal_gpio.h"
void board_init(void) {
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

View File

@ -0,0 +1,57 @@
#define MICROPY_HW_BOARD_NAME "CP Sapling M0"
#define MICROPY_HW_MCU_NAME "samd21e18"
#define MICROPY_HW_NEOPIXEL (&pin_PA15)
#define MICROPY_PORT_A (0)
#define MICROPY_PORT_B (0)
#define MICROPY_PORT_C (0)
#define IGNORE_PIN_PA02 1
#define IGNORE_PIN_PA03 1
#define IGNORE_PIN_PA04 1
#define IGNORE_PIN_PA05 1
#define IGNORE_PIN_PA06 1
#define IGNORE_PIN_PA07 1
#define IGNORE_PIN_PA12 1
#define IGNORE_PIN_PA13 1
#define IGNORE_PIN_PA14 1
#define IGNORE_PIN_PA20 1
#define IGNORE_PIN_PA21 1
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1
#define IGNORE_PIN_PA27 1
#define IGNORE_PIN_PA28 1
#define IGNORE_PIN_PA30 1
#define IGNORE_PIN_PA31 1
#define IGNORE_PIN_PB01 1
#define IGNORE_PIN_PB02 1
#define IGNORE_PIN_PB03 1
#define IGNORE_PIN_PB04 1
#define IGNORE_PIN_PB05 1
#define IGNORE_PIN_PB06 1
#define IGNORE_PIN_PB07 1
#define IGNORE_PIN_PB08 1
#define IGNORE_PIN_PB09 1
#define IGNORE_PIN_PB10 1
#define IGNORE_PIN_PB11 1
#define IGNORE_PIN_PB12 1
#define IGNORE_PIN_PB13 1
#define IGNORE_PIN_PB14 1
#define IGNORE_PIN_PB15 1
#define IGNORE_PIN_PB16 1
#define IGNORE_PIN_PB17 1
#define IGNORE_PIN_PB22 1
#define IGNORE_PIN_PB23 1
#define IGNORE_PIN_PB30 1
#define IGNORE_PIN_PB31 1
#define IGNORE_PIN_PB00 1
#define DEFAULT_I2C_BUS_SCL (&pin_PA09)
#define DEFAULT_I2C_BUS_SDA (&pin_PA08)
#define DEFAULT_SPI_BUS_SS (&pin_PA22)
#define DEFAULT_SPI_BUS_SCK (&pin_PA19)
#define DEFAULT_SPI_BUS_MOSI (&pin_PA18)
#define DEFAULT_SPI_BUS_MISO (&pin_PA17)

View File

@ -0,0 +1,24 @@
USB_VID = 0x1209
USB_PID = 0x4DDD
USB_PRODUCT = "CP Sapling"
USB_MANUFACTURER = "Oak Development Technologies"
CHIP_VARIANT = SAMD21E18A
CHIP_FAMILY = samd21
INTERNAL_FLASH_FILESYSTEM = 1
LONGINT_IMPL = NONE
CIRCUITPY_FULL_BUILD = 0
SUPEROPT_GC = 0
CFLAGS_BOARD = --param max-inline-insns-auto=15
ifeq ($(TRANSLATION), zh_Latn_pinyin)
RELEASE_NEEDS_CLEAN_BUILD = 1
CFLAGS_INLINE_LIMIT = 35
endif
ifeq ($(TRANSLATION), de_DE)
RELEASE_NEEDS_CLEAN_BUILD = 1
CFLAGS_INLINE_LIMIT = 35
SUPEROPT_VM = 0
endif

View File

@ -0,0 +1,38 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

View File

@ -0,0 +1,40 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
#include "common-hal/microcontroller/Pin.h"
#include "supervisor/shared/board.h"
#include "hal/include/hal_gpio.h"
void board_init(void) {
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

View File

@ -0,0 +1,62 @@
#define MICROPY_HW_BOARD_NAME "CP Sapling M0 w/ SPI Flash"
#define MICROPY_HW_MCU_NAME "samd21e18"
#define MICROPY_HW_NEOPIXEL (&pin_PA15)
#define MICROPY_PORT_A (0)
#define MICROPY_PORT_B (0)
#define MICROPY_PORT_C (0)
#define SPI_FLASH_MOSI_PIN &pin_PA18
#define SPI_FLASH_MISO_PIN &pin_PA17
#define SPI_FLASH_SCK_PIN &pin_PA19
#define SPI_FLASH_CS_PIN &pin_PA22
#define IGNORE_PIN_PA02 1
#define IGNORE_PIN_PA03 1
#define IGNORE_PIN_PA04 1
#define IGNORE_PIN_PA05 1
#define IGNORE_PIN_PA06 1
#define IGNORE_PIN_PA07 1
#define IGNORE_PIN_PA12 1
#define IGNORE_PIN_PA13 1
#define IGNORE_PIN_PA14 1
#define IGNORE_PIN_PA20 1
#define IGNORE_PIN_PA21 1
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1
#define IGNORE_PIN_PA27 1
#define IGNORE_PIN_PA28 1
#define IGNORE_PIN_PA30 1
#define IGNORE_PIN_PA31 1
#define IGNORE_PIN_PB01 1
#define IGNORE_PIN_PB02 1
#define IGNORE_PIN_PB03 1
#define IGNORE_PIN_PB04 1
#define IGNORE_PIN_PB05 1
#define IGNORE_PIN_PB06 1
#define IGNORE_PIN_PB07 1
#define IGNORE_PIN_PB08 1
#define IGNORE_PIN_PB09 1
#define IGNORE_PIN_PB10 1
#define IGNORE_PIN_PB11 1
#define IGNORE_PIN_PB12 1
#define IGNORE_PIN_PB13 1
#define IGNORE_PIN_PB14 1
#define IGNORE_PIN_PB15 1
#define IGNORE_PIN_PB16 1
#define IGNORE_PIN_PB17 1
#define IGNORE_PIN_PB22 1
#define IGNORE_PIN_PB23 1
#define IGNORE_PIN_PB30 1
#define IGNORE_PIN_PB31 1
#define IGNORE_PIN_PB00 1
#define DEFAULT_I2C_BUS_SCL (&pin_PA09)
#define DEFAULT_I2C_BUS_SDA (&pin_PA08)
#define DEFAULT_SPI_BUS_SS (&pin_PA22)
#define DEFAULT_SPI_BUS_SCK (&pin_PA19)
#define DEFAULT_SPI_BUS_MOSI (&pin_PA18)
#define DEFAULT_SPI_BUS_MISO (&pin_PA17)

View File

@ -0,0 +1,33 @@
USB_VID = 0x1209
USB_PID = 0x4DDE
USB_PRODUCT = "CP Sapling M0 w/ SPI Flash"
USB_MANUFACTURER = "Oak Development Technologies"
CHIP_VARIANT = SAMD21E18A
CHIP_FAMILY = samd21
INTERNAL_FLASH_FILESYSTEM = 0
LONGINT_IMPL = MPZ
SPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = AT25DF081A
CIRCUITPY_AUDIOIO = 0
CIRCUITPY_AUDIOBUSIO = 0
CIRCUITPY_BITBANGIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_FREQUENCYIO = 0
CIRCUITPY_I2CPERIPHERAL = 0
SUPEROPT_GC = 0
CFLAGS_BOARD = --param max-inline-insns-auto=15
ifeq ($(TRANSLATION), zh_Latn_pinyin)
RELEASE_NEEDS_CLEAN_BUILD = 1
CFLAGS_INLINE_LIMIT = 35
endif
ifeq ($(TRANSLATION), de_DE)
RELEASE_NEEDS_CLEAN_BUILD = 1
CFLAGS_INLINE_LIMIT = 35
SUPEROPT_VM = 0
endif

View File

@ -0,0 +1,38 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA18) },
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

View File

@ -12,11 +12,16 @@ EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = "GD25Q32C"
LONGINT_IMPL = MPZ
CIRCUITPY_FULLBUILD = 0
CIRCUITPY_BITBANGIO = 0
CIRCUITPY_FREQUENCYIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_I2CPERIPHERAL = 0
CIRCUITPY_I2CPERIPHERAL = 1
CIRCUITPY_VECTORIO = 0
CIRCUITPY_BUSDEVICE = 0
CIRCUITPY_DISPLAYIO = 0
CIRCUITPY_TOUCHIO = 0
CIRCUITPY_ROTARYIO = 0
CFLAGS_INLINE_LIMIT = 60

View File

@ -4,17 +4,17 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB11) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA12) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB10) },
{ MP_ROM_QSTR(MP_QSTR_D30), MP_ROM_PTR(&pin_PA30) },
{ MP_ROM_QSTR(MP_QSTR_D31), MP_ROM_PTR(&pin_PA31) },
{ MP_ROM_QSTR(MP_QSTR_D26), MP_ROM_PTR(&pin_PA30) },
{ MP_ROM_QSTR(MP_QSTR_D27), MP_ROM_PTR(&pin_PA31) },
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA17) },
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_OVTEMP), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA16) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA11) },
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA11) },
{ MP_ROM_QSTR(MP_QSTR_SAT_RESET), MP_ROM_PTR(&pin_PA11) },
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_SAT_PWR_ENABLE), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) },
{ MP_ROM_QSTR(MP_QSTR_INT_IMU_OBC), MP_ROM_PTR(&pin_PA19) },
@ -22,10 +22,17 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_PWRMON_SDA), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_PWRMON_SCL), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_PWRMON_ALERT), MP_ROM_PTR(&pin_PB03) },
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PB09) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB02) },
{ MP_ROM_QSTR(MP_QSTR_V_3V3_MEAS), MP_ROM_PTR(&pin_PB09) },
{ MP_ROM_QSTR(MP_QSTR_V_5V_MEAS), MP_ROM_PTR(&pin_PB02) },
{ MP_ROM_QSTR(MP_QSTR_FLASH_SCK), MP_ROM_PTR(&pin_PA23) },
{ MP_ROM_QSTR(MP_QSTR_FLASH_MOSI), MP_ROM_PTR(&pin_PA22) },
{ MP_ROM_QSTR(MP_QSTR_FLASH_MISO), MP_ROM_PTR(&pin_PA21) },
{ MP_ROM_QSTR(MP_QSTR_FLASH_CS), MP_ROM_PTR(&pin_PA20) },
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_I2C_MONITOR), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
};

View File

@ -26,12 +26,16 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB07) },
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PB06) },
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PB30) },
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA12) },
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA15) },
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PB00) },
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_D32), MP_ROM_PTR(&pin_PA30) },
{ MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_PA31) },
{ MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PB22) },
{ MP_ROM_QSTR(MP_QSTR_INT_IMU), MP_ROM_PTR(&pin_PA12) },
{ MP_ROM_QSTR(MP_QSTR_SAT_POWER), MP_ROM_PTR(&pin_PA15) },
{ MP_ROM_QSTR(MP_QSTR_OVTEMP), MP_ROM_PTR(&pin_PB00) },
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },

View File

@ -16,6 +16,7 @@ CIRCUITPY_FREQUENCYIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_I2CPERIPHERAL = 0
CIRCUITPY_VECTORIO = 0
CIRCUITPY_BUSDEVICE = 0
CFLAGS_INLINE_LIMIT = 60
SUPEROPT_GC = 0

View File

@ -20,7 +20,6 @@ CIRCUITPY_GAMEPAD = 0
CFLAGS_INLINE_LIMIT = 50
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Crickit
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Motor
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

View File

@ -21,11 +21,11 @@ CIRCUITPY_SAMD = 0
CIRCUITPY_USB_MIDI = 0
CIRCUITPY_USB_HID = 0
CIRCUITPY_TOUCHIO = 0
CIRCUITPY_BUSDEVICE = 1
CFLAGS_INLINE_LIMIT = 35
# Make more room.
SUPEROPT_GC = 0
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_RFM69

View File

@ -22,11 +22,11 @@ CIRCUITPY_SAMD = 0
CIRCUITPY_USB_MIDI = 0
CIRCUITPY_USB_HID = 0
CIRCUITPY_TOUCHIO = 0
CIRCUITPY_BUSDEVICE = 1
CFLAGS_INLINE_LIMIT = 35
# Make more room.
SUPEROPT_GC = 0
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_RFM9x

View File

@ -17,6 +17,7 @@ CIRCUITPY_COUNTIO = 0
CIRCUITPY_I2CPERIPHERAL = 0
# supersized, not ultra-supersized
CIRCUITPY_VECTORIO = 0
CIRCUITPY_BUSDEVICE = 0
CFLAGS_INLINE_LIMIT = 60
SUPEROPT_GC = 0

View File

@ -27,7 +27,6 @@ CFLAGS_INLINE_LIMIT = 55
SUPEROPT_GC = 0
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

View File

@ -33,6 +33,10 @@
#define DEFAULT_UART_BUS_RX (&pin_PA11)
#define DEFAULT_UART_BUS_TX (&pin_PA10)
// These pins are connected to the external crystal.
#define IGNORE_PIN_PA00 1
#define IGNORE_PIN_PA01 1
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1

View File

@ -15,6 +15,7 @@ CIRCUITPY_BITBANGIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_I2CPERIPHERAL = 0
CIRCUITPY_VECTORIO = 0
CIRCUITPY_BUSDEVICE = 0
CFLAGS_INLINE_LIMIT = 60
SUPEROPT_GC = 0

View File

@ -23,9 +23,6 @@
#define DEFAULT_SPI_BUS_MOSI (&pin_PB23)
#define DEFAULT_SPI_BUS_MISO (&pin_PB22)
#define DEFAULT_UART_BUS_RX (&pin_PB17)
#define DEFAULT_UART_BUS_TX (&pin_PB16)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1

View File

@ -30,10 +30,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA22)},
{MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA23)},
// UART
{MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB17)},
{MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB16)},
// I2C
{MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA12)},
{MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA13)},
@ -58,6 +54,8 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_GPIO0), MP_ROM_PTR(&pin_PA31)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_PA00)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_PB12)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_PB16)},
{MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_PB17)},
// TFT control pins
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_LITE), MP_ROM_PTR(&pin_PA01)},
@ -69,7 +67,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj)},
{MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj)},
{MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj)},
{MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)}};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

View File

@ -21,7 +21,6 @@ CIRCUITPY_GAMEPAD = 0
CIRCUITPY_RGBMATRIX = 0
CIRCUITPY_PS2IO = 0
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Register
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD

View File

@ -21,7 +21,6 @@ CIRCUITPY_GAMEPAD = 0
CIRCUITPY_RGBMATRIX = 0
CIRCUITPY_PS2IO = 0
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Register
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD

View File

@ -24,9 +24,6 @@
#define DEFAULT_SPI_BUS_MOSI (&pin_PA12)
#define DEFAULT_SPI_BUS_MISO (&pin_PA14)
#define DEFAULT_UART_BUS_RX (&pin_PB13)
#define DEFAULT_UART_BUS_TX (&pin_PB12)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1

View File

@ -58,10 +58,8 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_PB16) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_PB17) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RTS), MP_ROM_PTR(&pin_PA15) },
// UART
{ MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB12) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB13) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_PB12) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_PB13) },
// SPI
{ MP_OBJ_NEW_QSTR(MP_QSTR_MOSI),MP_ROM_PTR(&pin_PA12) },
@ -78,7 +76,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
};

View File

@ -22,9 +22,6 @@
#define DEFAULT_SPI_BUS_MOSI (&pin_PA12)
#define DEFAULT_SPI_BUS_MISO (&pin_PA14)
#define DEFAULT_UART_BUS_RX (&pin_PB13)
#define DEFAULT_UART_BUS_TX (&pin_PB12)
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1

View File

@ -58,10 +58,8 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_PB16) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_PB17) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RTS), MP_ROM_PTR(&pin_PA15) },
// UART
{ MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB12) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB13) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_PB12) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_PB13) },
// SPI
{ MP_OBJ_NEW_QSTR(MP_QSTR_MOSI),MP_ROM_PTR(&pin_PA12) },
@ -78,7 +76,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
};

View File

@ -13,5 +13,4 @@ LONGINT_IMPL = MPZ
CIRCUITPY_AUDIOBUSIO = 0
CIRCUITPY_USTACK = 1
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

View File

@ -15,6 +15,7 @@ CIRCUITPY_BITBANGIO = 0
CIRCUITPY_GAMEPAD = 0
CIRCUITPY_I2CPERIPHERAL = 0
CIRCUITPY_VECTORIO = 0
CIRCUITPY_BUSDEVICE = 0
CFLAGS_INLINE_LIMIT = 60

View File

@ -16,6 +16,7 @@ CIRCUITPY_COUNTIO = 0
CIRCUITPY_GAMEPAD = 0
CIRCUITPY_I2CPERIPHERAL = 0
CIRCUITPY_VECTORIO = 0
CIRCUITPY_BUSDEVICE = 0
CFLAGS_INLINE_LIMIT = 60
SUPEROPT_GC = 0

View File

@ -21,6 +21,6 @@ CIRCUITPY_PULSEIO=0
CIRCUITPY_ROTARYIO=0
CIRCUITPY_TOUCHIO_USE_NATIVE=0
CIRCUITPY_TOUCHIO=0
CIRCUITPY_BUSDEVICE=1
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice

View File

@ -24,7 +24,7 @@ CIRCUITPY_TOUCHIO=0
CIRCUITPY_USB_MIDI=0
CIRCUITPY_RTC=0
CIRCUITPY_COUNTIO=0
CIRCUITPY_BUSDEVICE=1
# Include these Python libraries in firmware.
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD

View File

@ -326,7 +326,7 @@ static void setup_dma(audiobusio_pdmin_obj_t* self, uint32_t length,
// higher sample rate than specified. Then after the audio is
// recorded, a more expensive filter non-real-time filter could be
// used to down-sample and low-pass.
uint16_t sinc_filter [OVERSAMPLING] = {
const uint16_t sinc_filter [OVERSAMPLING] = {
0, 2, 9, 21, 39, 63, 94, 132,
179, 236, 302, 379, 467, 565, 674, 792,
920, 1055, 1196, 1341, 1487, 1633, 1776, 1913,
@ -337,7 +337,11 @@ uint16_t sinc_filter [OVERSAMPLING] = {
94, 63, 39, 21, 9, 2, 0, 0
};
#define REPEAT_16_TIMES(X) X X X X X X X X X X X X X X X X
#ifdef SAMD21
#define REPEAT_16_TIMES(X) do { for(uint8_t j=0; j<4; j++) { X X X X } } while (0)
#else
#define REPEAT_16_TIMES(X) do { X X X X X X X X X X X X X X X X } while(0)
#endif
static uint16_t filter_sample(uint32_t pdm_samples[4]) {
uint16_t running_sum = 0;
@ -354,7 +358,7 @@ static uint16_t filter_sample(uint32_t pdm_samples[4]) {
filter_ptr++;
pdm_sample <<= 1;
}
)
);
}
return running_sum;
}

View File

@ -129,7 +129,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) {
return true;
}
void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) {
void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type,
display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) {
displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj);
common_hal_digitalio_digitalinout_set_value(&self->command, byte_type == DISPLAY_DATA);
uint32_t* clear_write = (uint32_t*) &self->write_group->OUTCLR.reg;

View File

@ -65,6 +65,7 @@
#include "py/mphal.h"
#include "common-hal/microcontroller/Processor.h"
#include "shared-bindings/microcontroller/ResetReason.h"
#include "samd/adc.h"
@ -349,3 +350,7 @@ void common_hal_mcu_processor_get_uid(uint8_t raw_id[]) {
}
}
}
mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) {
return RESET_REASON_UNKNOWN;
}

View File

@ -42,6 +42,7 @@
#define CIRCUITPY_MCU_FAMILY samd21
#define MICROPY_PY_SYS_PLATFORM "Atmel SAMD21"
#define SPI_FLASH_MAX_BAUDRATE 8000000
#define MICROPY_PY_BUILTINS_COMPLEX (0)
#define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (0)
#define MICROPY_PY_FUNCTION_ATTRS (0)
// MICROPY_PY_UJSON depends on MICROPY_PY_IO

View File

@ -29,6 +29,10 @@ ifndef CIRCUITPY_AUDIOMP3
CIRCUITPY_AUDIOMP3 = 0
endif
ifndef CIRCUITPY_BUILTINS_POW3
CIRCUITPY_BUILTINS_POW3 = 0
endif
ifndef CIRCUITPY_FREQUENCYIO
CIRCUITPY_FREQUENCYIO = 0
endif

View File

@ -390,8 +390,8 @@ void reset_cpu(void) {
reset();
}
supervisor_allocation* port_fixed_stack(void) {
return NULL;
bool port_has_fixed_stack(void) {
return false;
}
uint32_t *port_stack_get_limit(void) {

View File

@ -31,6 +31,7 @@
// For NAN: remove when not needed.
#include <math.h>
#include "py/mphal.h"
#include "shared-bindings/microcontroller/ResetReason.h"
uint32_t common_hal_mcu_processor_get_frequency(void) {
return cxd56_get_cpu_baseclk();
@ -47,3 +48,7 @@ float common_hal_mcu_processor_get_voltage(void) {
void common_hal_mcu_processor_get_uid(uint8_t raw_id[]) {
boardctl(BOARDIOC_UNIQUEID, (uintptr_t) raw_id);
}
mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) {
return RESET_REASON_UNKNOWN;
}

View File

@ -98,8 +98,8 @@ void reset_to_bootloader(void) {
}
}
supervisor_allocation* port_fixed_stack(void) {
return NULL;
bool port_has_fixed_stack(void) {
return true;
}
uint32_t *port_stack_get_limit(void) {

View File

@ -104,6 +104,8 @@ INC += -isystem esp-idf/components/soc/soc/include
INC += -isystem esp-idf/components/soc/soc/esp32s2/include
INC += -isystem esp-idf/components/heap/include
INC += -isystem esp-idf/components/esp_system/include
INC += -isystem esp-idf/components/spi_flash/include
INC += -isystem esp-idf/components/nvs_flash/include
INC += -I$(BUILD)/esp-idf/config
CFLAGS += -DHAVE_CONFIG_H \
@ -188,6 +190,8 @@ SRC_C += \
lib/utils/pyexec.c \
lib/utils/stdout_helpers.c \
lib/utils/sys_stdio_mphal.c \
lib/netutils/netutils.c \
peripherals/timer.c \
peripherals/pcnt.c \
peripherals/pins.c \
peripherals/rmt.c \
@ -332,10 +336,10 @@ $(BUILD)/firmware.uf2: $(BUILD)/circuitpython-firmware.bin
$(Q)$(PYTHON3) $(TOP)/tools/uf2/utils/uf2conv.py -f 0xbfdd4eee -b 0x0000 -c -o $@ $^
flash: $(BUILD)/firmware.bin
esptool.py --chip esp32s2 -p $(PORT) --no-stub -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x0000 $^
esptool.py --chip esp32s2 -p $(PORT) --no-stub -b 460800 --before=default_reset --after=no_reset write_flash $(FLASH_FLAGS) 0x0000 $^
flash-circuitpython-only: $(BUILD)/circuitpython-firmware.bin
esptool.py --chip esp32s2 -p $(PORT) --no-stub -b 460800 --before=default_reset --after=hard_reset write_flash $(FLASH_FLAGS) 0x10000 $^
esptool.py --chip esp32s2 -p $(PORT) --no-stub -b 460800 --before=default_reset --after=no_reset write_flash $(FLASH_FLAGS) 0x10000 $^
include $(TOP)/py/mkrules.mk

View File

@ -26,7 +26,83 @@
#include "boards/board.h"
#include "mpconfigboard.h"
#include "shared-bindings/busio/SPI.h"
#include "shared-bindings/displayio/FourWire.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "shared-module/displayio/__init__.h"
#include "supervisor/shared/board.h"
#define DELAY 0x80
// This is an ILO373 control chip. The display is a 2.9" grayscale EInk.
const uint8_t display_start_sequence[] = {
0x01, 5, 0x03, 0x00, 0x2b, 0x2b, 0x13, // power setting
0x06, 3, 0x17, 0x17, 0x17, // booster soft start
0x04, DELAY, 200, // power on and wait 200 ms
0x00, 1, 0x7f, // panel setting
0x50, 1, 0x97, // CDI setting
0x30, 1, 0x3c, // PLL set to 50 Hx (M = 7, N = 4)
0x61, 3, 0x80, 0x01, 0x28, // Resolution
0x82, DELAY | 1, 0x12, 50, // VCM DC and delay 50ms
// Look up tables for voltage sequence for pixel transition
// Common voltage
0x20, 0x2a,
0x00, 0x0a, 0x00, 0x00, 0x00, 0x01,
0x60, 0x14, 0x14, 0x00, 0x00, 0x01,
0x00, 0x14, 0x00, 0x00, 0x00, 0x01,
0x00, 0x13, 0x0a, 0x01, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// White to white
0x21, 0x2a,
0x40, 0x0a, 0x00, 0x00, 0x00, 0x01,
0x90, 0x14, 0x14, 0x00, 0x00, 0x01,
0x10, 0x14, 0x0a, 0x00, 0x00, 0x01,
0xa0, 0x13, 0x01, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// Black to white
0x22, 0x2a,
0x40, 0x0a, 0x00, 0x00, 0x00, 0x01,
0x90, 0x14, 0x14, 0x00, 0x00, 0x01,
0x00, 0x14, 0x0a, 0x00, 0x00, 0x01,
0x99, 0x0c, 0x01, 0x03, 0x04, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// White to black
0x23, 0x2a,
0x40, 0x0a, 0x00, 0x00, 0x00, 0x01,
0x90, 0x14, 0x14, 0x00, 0x00, 0x01,
0x00, 0x14, 0x0a, 0x00, 0x00, 0x01,
0x99, 0x0b, 0x04, 0x04, 0x01, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// Black to black
0x24, 0x2a,
0x80, 0x0a, 0x00, 0x00, 0x00, 0x01,
0x90, 0x14, 0x14, 0x00, 0x00, 0x01,
0x20, 0x14, 0x0a, 0x00, 0x00, 0x01,
0x50, 0x13, 0x01, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
const uint8_t display_stop_sequence[] = {
0x50, 0x01, 0x17, // CDI Setting
0x82, 0x01, 0x00, // VCM DC to -0.1V
0x02, 0x00 // Power off
};
void board_init(void) {
// USB
@ -36,6 +112,52 @@ void board_init(void) {
// Debug UART
common_hal_never_reset_pin(&pin_GPIO43);
common_hal_never_reset_pin(&pin_GPIO44);
busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus;
common_hal_busio_spi_construct(spi, &pin_GPIO36, &pin_GPIO35, NULL);
common_hal_busio_spi_never_reset(spi);
displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
bus->base.type = &displayio_fourwire_type;
common_hal_displayio_fourwire_construct(bus,
spi,
&pin_GPIO7, // EPD_DC Command or data
&pin_GPIO8, // EPD_CS Chip select
&pin_GPIO6, // EPD_RST Reset
4000000, // Baudrate
0, // Polarity
0); // Phase
displayio_epaperdisplay_obj_t* display = &displays[0].epaper_display;
display->base.type = &displayio_epaperdisplay_type;
common_hal_displayio_epaperdisplay_construct(
display,
bus,
display_start_sequence, sizeof(display_start_sequence),
display_stop_sequence, sizeof(display_stop_sequence),
296, // width
128, // height
160, // ram_width
296, // ram_height
0, // colstart
0, // rowstart
270, // rotation
NO_COMMAND, // set_column_window_command
NO_COMMAND, // set_row_window_command
NO_COMMAND, // set_current_column_command
NO_COMMAND, // set_current_row_command
0x10, // write_black_ram_command
false, // black_bits_inverted
0x13, // write_color_ram_command
false, // color_bits_inverted
0x000000, // highlight_color
0x12, // refresh_display_command
1.0, // refresh_time
&pin_GPIO5, // busy_pin
false, // busy_state
5.0, // seconds_per_frame
false, // always_toggle_chip_select
true); // grayscale
}
bool board_requests_safe_mode(void) {

View File

@ -1,5 +1,7 @@
#include "shared-bindings/board/__init__.h"
#include "shared-module/displayio/__init__.h"
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
{ MP_ROM_QSTR(MP_QSTR_AD1), MP_ROM_PTR(&pin_GPIO18) },
@ -14,11 +16,19 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_EPD_CS), MP_ROM_PTR(&pin_GPIO8) },
{ MP_ROM_QSTR(MP_QSTR_BUTTON_A), MP_ROM_PTR(&pin_GPIO15) },
{ MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
{ MP_ROM_QSTR(MP_QSTR_BUTTON_B), MP_ROM_PTR(&pin_GPIO14) },
{ MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
{ MP_ROM_QSTR(MP_QSTR_BUTTON_C), MP_ROM_PTR(&pin_GPIO12) },
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
{ MP_ROM_QSTR(MP_QSTR_BUTTON_D), MP_ROM_PTR(&pin_GPIO11) },
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
{ MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO3) },
{ MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO4) },
{ MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO4) },
@ -34,8 +44,11 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) },
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) },
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO1) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].epaper_display)}
};
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

View File

@ -25,7 +25,6 @@
*/
//Micropython setup
#define MICROPY_HW_BOARD_NAME "microS2"
#define MICROPY_HW_MCU_NAME "ESP32S2"
@ -33,8 +32,20 @@
#define MICROPY_HW_BUTTON (&pin_GPIO0)
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
// Default bus pins
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO1)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2)
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36)
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
// Explanation of how a user got into safe mode.
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

View File

@ -37,3 +37,13 @@
// #define MICROPY_HW_APA102_MOSI (&pin_GPIO40)
// #define MICROPY_HW_APA102_SCK (&pin_GPIO45)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36)
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)

View File

@ -0,0 +1,3 @@
We share root certificates with the nina-fw to ensure they both use the same roots.
https://github.com/adafruit/nina-fw

@ -0,0 +1 @@
Subproject commit f2a0e601b23212dda4fe305eab30af49a7c7fb41

View File

@ -0,0 +1,198 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2016 Scott Shawcroft for Adafruit Industries
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/obj.h"
#include "py/objtuple.h"
#include "py/runtime.h"
#include "shared-bindings/alarm/pin/PinAlarm.h"
#include "shared-bindings/alarm/time/TimeAlarm.h"
#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/time/__init__.h"
#include "shared-bindings/wifi/__init__.h"
#include "common-hal/alarm/__init__.h"
#include "esp_log.h"
#include "esp_sleep.h"
STATIC mp_obj_tuple_t *_deep_sleep_alarms;
void alarm_reset(void) {
_deep_sleep_alarms = mp_const_empty_tuple;
}
void common_hal_alarm_disable_all(void) {
esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_ALL);
}
mp_obj_t common_hal_alarm_get_wake_alarm(void) {
switch (esp_sleep_get_wakeup_cause()) {
case ESP_SLEEP_WAKEUP_TIMER: {
// Wake up from timer.
alarm_time_time_alarm_obj_t *timer = m_new_obj(alarm_time_time_alarm_obj_t);
timer->base.type = &alarm_time_time_alarm_type;
return timer;
}
case ESP_SLEEP_WAKEUP_EXT0: {
// Wake up from GPIO
alarm_pin_pin_alarm_obj_t *ext0 = m_new_obj(alarm_pin_pin_alarm_obj_t);
ext0->base.type = &alarm_pin_pin_alarm_type;
return ext0;
}
case ESP_SLEEP_WAKEUP_TOUCHPAD:
// TODO: implement TouchIO
// Wake up from touch on pad, esp_sleep_get_touchpad_wakeup_status()
break;
case ESP_SLEEP_WAKEUP_UNDEFINED:
default:
// Not a deep sleep reset.
break;
}
return mp_const_none;
}
// Set up light sleep or deep sleep alarms.
STATIC void setup_sleep_alarms(size_t n_alarms, const mp_obj_t *alarms) {
bool time_alarm_set = false;
alarm_time_time_alarm_obj_t *time_alarm = MP_OBJ_NULL;
for (size_t i = 0; i < n_alarms; i++) {
if (MP_OBJ_IS_TYPE(alarms[i], &alarm_pin_pin_alarm_type)) {
mp_raise_NotImplementedError(translate("PinAlarm not yet implemented"));
}
else if (MP_OBJ_IS_TYPE(alarms[i], &alarm_time_time_alarm_type)) {
if (time_alarm_set) {
mp_raise_ValueError(translate("Only one alarm.time alarm can be set."));
}
time_alarm = MP_OBJ_TO_PTR(alarms[i]);
time_alarm_set = true;
}
}
if (time_alarm != MP_OBJ_NULL) {
// Compute how long to actually sleep, considering the time now.
mp_float_t now_secs = uint64_to_float(common_hal_time_monotonic_ms()) / 1000.0f;
mp_float_t wakeup_in_secs = MAX(0.0f, time_alarm->monotonic_time - now_secs);
const uint64_t sleep_for_us = (uint64_t) (wakeup_in_secs * 1000000);
ESP_LOGI("ALARM", "will sleep for us: %lld", sleep_for_us);
esp_sleep_enable_timer_wakeup(sleep_for_us);
}
}
mp_obj_t common_hal_alarm_wait_until_alarms(size_t n_alarms, const mp_obj_t *alarms) {
if (n_alarms == 0) {
return mp_const_none;
}
bool time_alarm_set = false;
alarm_time_time_alarm_obj_t *time_alarm = MP_OBJ_NULL;
for (size_t i = 0; i < n_alarms; i++) {
if (MP_OBJ_IS_TYPE(alarms[i], &alarm_pin_pin_alarm_type)) {
mp_raise_NotImplementedError(translate("PinAlarm not yet implemented"));
}
else if (MP_OBJ_IS_TYPE(alarms[i], &alarm_time_time_alarm_type)) {
if (time_alarm_set) {
mp_raise_ValueError(translate("Only one alarm.time alarm can be set."));
}
time_alarm = MP_OBJ_TO_PTR(alarms[i]);
time_alarm_set = true;
}
}
ESP_LOGI("ALARM", "waiting for alarms");
if (time_alarm_set && n_alarms == 1) {
// If we're only checking time, avoid a polling loop, so maybe we can save some power.
const mp_float_t now_secs = uint64_to_float(common_hal_time_monotonic_ms()) / 1000.0f;
const mp_float_t wakeup_in_secs = MAX(0.0f, time_alarm->monotonic_time - now_secs);
const uint32_t delay_ms = (uint32_t) (wakeup_in_secs * 1000.0f);
ESP_LOGI("ALARM", "Delay for ms: %d", delay_ms);
common_hal_time_delay_ms((uint32_t) delay_ms);
} else {
// Poll for alarms.
while (true) {
RUN_BACKGROUND_TASKS;
// Allow ctrl-C interrupt.
if (mp_hal_is_interrupted()) {
return mp_const_none;
}
// TODO: Check PinAlarms.
if (time_alarm != MP_OBJ_NULL &&
common_hal_time_monotonic_ms() * 1000.f >= time_alarm->monotonic_time) {
return time_alarm;
}
}
}
return mp_const_none;
}
// Is it safe to do a light sleep? Check whether WiFi is on or there are
// other ongoing tasks that should not be shut down.
static bool light_sleep_ok(void) {
return !common_hal_wifi_radio_get_enabled(&common_hal_wifi_radio_obj);
}
mp_obj_t common_hal_alarm_light_sleep_until_alarms(size_t n_alarms, const mp_obj_t *alarms) {
if (n_alarms == 0) {
return mp_const_none;
}
if (light_sleep_ok()) {
ESP_LOGI("ALARM", "start light sleep");
setup_sleep_alarms(n_alarms, alarms);
esp_light_sleep_start();
return common_hal_alarm_get_wake_alarm();
} else {
// Don't do an ESP32 light sleep.
return common_hal_alarm_wait_until_alarms(n_alarms, alarms);
}
}
void common_hal_alarm_exit_and_deep_sleep_until_alarms(size_t n_alarms, const mp_obj_t *alarms) {
setup_sleep_alarms(n_alarms, alarms);
// Raise an exception, which will be processed in main.c.
mp_raise_arg1(&mp_type_DeepSleepRequest, NULL);
}
void common_hal_alarm_prepare_for_deep_sleep(void) {
// Turn off WiFi and anything else that should be shut down cleanly.
common_hal_wifi_radio_set_enabled(&common_hal_wifi_radio_obj, false);
}
void NORETURN common_hal_alarm_enter_deep_sleep(void) {
ESP_LOGI("ALARM", "start deep sleep");
esp_deep_sleep_start();
}

View File

@ -0,0 +1,32 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Dan Halbert for Adafruit Industries.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM__INIT__H
#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM__INIT__H
void alarm_reset(void);
#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM__INIT__H

View File

@ -0,0 +1,53 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Dan Halbert for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "esp_sleep.h"
#include "shared-bindings/alarm/pin/PinAlarm.h"
#include "shared-bindings/microcontroller/Pin.h"
void common_hal_alarm_pin_pin_alarm_construct(alarm_pin_pin_alarm_obj_t *self, mcu_pin_obj_t *pin, bool value, bool edge, bool pull) {
self->pin = pin;
self->value = value;
self->edge = edge;
self->pull = pull;
}
mcu_pin_obj_t *common_hal_alarm_pin_pin_alarm_get_pin(alarm_pin_pin_alarm_obj_t *self) {
return self->pin;
}
bool common_hal_alarm_pin_pin_alarm_get_value(alarm_pin_pin_alarm_obj_t *self) {
return self->value;
}
bool common_hal_alarm_pin_pin_alarm_get_edge(alarm_pin_pin_alarm_obj_t *self) {
return self->edge;
}
bool common_hal_alarm_pin_pin_alarm_get_pull(alarm_pin_pin_alarm_obj_t *self) {
return self->pull;
}

View File

@ -0,0 +1,37 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Dan Halbert for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/obj.h"
#include "py/objtuple.h"
typedef struct {
mp_obj_base_t base;
mcu_pin_obj_t *pin;
bool value;
bool all_same_value;
bool edge;
bool pull;
} alarm_pin_pin_alarm_obj_t;

View File

@ -0,0 +1,35 @@
#include "shared-bindings/alarm_io/__init__.h"
#include "esp_sleep.h"
#include "driver/rtc_io.h"
mp_obj_t common_hal_alarm_io_pin_state (alarm_io_obj_t *self_in) {
if (!rtc_gpio_is_valid_gpio(self_in->gpio)) {
mp_raise_ValueError(translate("io must be rtc io"));
}
if (self_in->pull && !self_in->level) {
for (uint8_t i = 0; i<=4; i+=2) {
if (self_in->gpio == i) {
mp_raise_ValueError(translate("IOs 0, 2 & 4 do not support internal pullup in sleep"));
}
}
}
switch(esp_sleep_enable_ext0_wakeup(self_in->gpio, self_in->level)) {
case ESP_ERR_INVALID_ARG:
mp_raise_ValueError(translate("trigger level must be 0 or 1"));
case ESP_ERR_INVALID_STATE:
mp_raise_RuntimeError(translate("wakeup conflict"));
default:
break;
}
if (self_in->pull) { (self_in->level) ? rtc_gpio_pulldown_en(self_in->gpio) : rtc_gpio_pullup_en(self_in->gpio); }
return self_in;
}
void common_hal_alarm_io_disable (void) {
esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_EXT0 | ESP_SLEEP_WAKEUP_EXT1);
}

View File

@ -0,0 +1,39 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Dan Halbert for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "esp_sleep.h"
#include "py/runtime.h"
#include "shared-bindings/alarm/time/TimeAlarm.h"
void common_hal_alarm_time_time_alarm_construct(alarm_time_time_alarm_obj_t *self, mp_float_t monotonic_time) {
self->monotonic_time = monotonic_time;
}
mp_float_t common_hal_alarm_time_time_alarm_get_monotonic_time(alarm_time_time_alarm_obj_t *self) {
return self->monotonic_time;
}

View File

@ -0,0 +1,33 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Dan Halbert for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/obj.h"
typedef struct {
mp_obj_base_t base;
mp_float_t monotonic_time; // values compatible with time.monotonic_time()
} alarm_time_time_alarm_obj_t;

View File

@ -204,6 +204,14 @@ void common_hal_busio_spi_construct(busio_spi_obj_t *self,
// hal->dummy_bits = 0;
// hal->addr = 0;
claim_pin(self->clock_pin);
if (self->MOSI_pin != NULL) {
claim_pin(self->MOSI_pin);
}
if (self->MISO_pin != NULL) {
claim_pin(self->MISO_pin);
}
hal->io_mode = SPI_LL_IO_MODE_NORMAL;
common_hal_busio_spi_configure(self, 250000, 0, 0, 8);

View File

@ -57,7 +57,8 @@ bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) {
return false;
}
void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, display_chip_select_behavior_t chip_select, uint8_t *data, uint32_t data_length) {
void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type,
display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) {
}

View File

@ -0,0 +1,193 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 microDev
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "shared-bindings/frequencyio/FrequencyIn.h"
#include "py/runtime.h"
static void IRAM_ATTR pcnt_overflow_handler(void *self_in) {
frequencyio_frequencyin_obj_t * self = self_in;
// reset counter
pcnt_counter_clear(self->unit);
// increase multiplier
self->multiplier++;
// reset interrupt
PCNT.int_clr.val = BIT(self->unit);
}
static void IRAM_ATTR timer_interrupt_handler(void *self_in) {
frequencyio_frequencyin_obj_t * self = self_in;
// get counter value
int16_t count;
pcnt_get_counter_value(self->unit, &count);
self->frequency = ((count / 2.0) + (self->multiplier * INT16_MAX / 4.0)) / (self->capture_period);
// reset multiplier
self->multiplier = 0;
// reset counter
pcnt_counter_clear(self->unit);
// reset interrupt
timg_dev_t *device = self->timer.group ? &(TIMERG1) : &(TIMERG0);
if (self->timer.idx) {
device->int_clr.t1 = 1;
} else {
device->int_clr.t0 = 1;
}
device->hw_timer[self->timer.idx].config.alarm_en = 1;
}
static void init_pcnt(frequencyio_frequencyin_obj_t* self) {
// Prepare configuration for the PCNT unit
const pcnt_config_t pcnt_config = {
// Set PCNT input signal and control GPIOs
.pulse_gpio_num = self->pin,
.ctrl_gpio_num = PCNT_PIN_NOT_USED,
.channel = PCNT_CHANNEL_0,
// What to do on the positive / negative edge of pulse input?
.pos_mode = PCNT_COUNT_INC, // count both rising and falling edges
.neg_mode = PCNT_COUNT_INC,
// Set counter limit
.counter_h_lim = INT16_MAX,
.counter_l_lim = 0,
};
// initialize PCNT
const int8_t unit = peripherals_pcnt_init(pcnt_config);
if (unit == -1) {
mp_raise_RuntimeError(translate("All PCNT units in use"));
}
// set the GPIO back to high-impedance, as pcnt_unit_config sets it as pull-up
gpio_set_pull_mode(self->pin, GPIO_FLOATING);
self->unit = (pcnt_unit_t)unit;
// enable pcnt interrupt
pcnt_event_enable(self->unit, PCNT_EVT_H_LIM);
pcnt_isr_register(pcnt_overflow_handler, (void *)self, ESP_INTR_FLAG_IRAM, &self->handle);
pcnt_intr_enable(self->unit);
}
static void init_timer(frequencyio_frequencyin_obj_t* self) {
// Prepare configuration for the timer module
const timer_config_t config = {
.alarm_en = true,
.counter_en = false,
.intr_type = TIMER_INTR_LEVEL,
.counter_dir = TIMER_COUNT_UP,
.auto_reload = true,
.divider = 80 // 1 us per tick
};
// initialize Timer
peripherals_timer_init(&config, &self->timer);
if (self->timer.idx == TIMER_MAX || self->timer.group == TIMER_GROUP_MAX) {
mp_raise_RuntimeError(translate("All timers in use"));
}
timer_idx_t idx = self->timer.idx;
timer_group_t group = self->timer.group;
// enable timer interrupt
timer_set_alarm_value(group, idx, self->capture_period * 1000000);
timer_isr_register(group, idx, timer_interrupt_handler, (void *)self, ESP_INTR_FLAG_IRAM, &self->handle);
timer_enable_intr(group, idx);
// start timer
timer_start(self->timer.group, self->timer.idx);
}
void common_hal_frequencyio_frequencyin_construct(frequencyio_frequencyin_obj_t* self,
const mcu_pin_obj_t* pin, const uint16_t capture_period) {
if ((capture_period == 0) || (capture_period > 500)) {
mp_raise_ValueError(translate("Invalid capture period. Valid range: 1 - 500"));
}
self->pin = pin->number;
self->handle = NULL;
self->multiplier = 0;
self->capture_period = capture_period;
// initialize pcnt and timer
init_pcnt(self);
init_timer(self);
claim_pin(pin);
}
bool common_hal_frequencyio_frequencyin_deinited(frequencyio_frequencyin_obj_t* self) {
return self->unit == PCNT_UNIT_MAX;
}
void common_hal_frequencyio_frequencyin_deinit(frequencyio_frequencyin_obj_t* self) {
if (common_hal_frequencyio_frequencyin_deinited(self)) {
return;
}
reset_pin_number(self->pin);
peripherals_pcnt_deinit(&self->unit);
peripherals_timer_deinit(&self->timer);
if (self->handle) {
esp_intr_free(self->handle);
self->handle = NULL;
}
}
uint32_t common_hal_frequencyio_frequencyin_get_item(frequencyio_frequencyin_obj_t* self) {
return self->frequency;
}
void common_hal_frequencyio_frequencyin_pause(frequencyio_frequencyin_obj_t* self) {
pcnt_counter_pause(self->unit);
timer_pause(self->timer.group, self->timer.idx);
}
void common_hal_frequencyio_frequencyin_resume(frequencyio_frequencyin_obj_t* self) {
pcnt_counter_resume(self->unit);
timer_start(self->timer.group, self->timer.idx);
}
void common_hal_frequencyio_frequencyin_clear(frequencyio_frequencyin_obj_t* self) {
self->frequency = 0;
pcnt_counter_clear(self->unit);
timer_set_counter_value(self->timer.group, self->timer.idx, 0);
}
uint16_t common_hal_frequencyio_frequencyin_get_capture_period(frequencyio_frequencyin_obj_t *self) {
return self->capture_period;
}
void common_hal_frequencyio_frequencyin_set_capture_period(frequencyio_frequencyin_obj_t *self, uint16_t capture_period) {
if ((capture_period == 0) || (capture_period > 500)) {
mp_raise_ValueError(translate("Invalid capture period. Valid range: 1 - 500"));
}
self->capture_period = capture_period;
common_hal_frequencyio_frequencyin_clear(self);
timer_set_alarm_value(self->timer.group, self->timer.idx, capture_period * 1000000);
}

View File

@ -0,0 +1,45 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 microDev
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_FREQUENCYIO_FREQUENCYIN_H
#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_FREQUENCYIO_FREQUENCYIN_H
#include "py/obj.h"
#include "peripherals/pcnt.h"
#include "peripherals/timer.h"
typedef struct {
mp_obj_base_t base;
pcnt_unit_t unit;
timer_index_t timer;
intr_handle_t handle;
uint8_t pin;
uint8_t multiplier;
uint32_t frequency;
uint16_t capture_period;
} frequencyio_frequencyin_obj_t;
#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_FREQUENCYIO_FREQUENCYIN_H

View File

@ -0,0 +1 @@
// No ferquencyio module functions.

Some files were not shown because too many files have changed in this diff Show More