diff --git a/.gitmodules b/.gitmodules
index dfd718630c..3de3c6a51e 100644
--- a/.gitmodules
+++ b/.gitmodules
@@ -187,10 +187,6 @@
 [submodule "frozen/Adafruit_CircuitPython_APDS9960"]
 	path = frozen/Adafruit_CircuitPython_APDS9960
 	url = https://github.com/adafruit/Adafruit_CircuitPython_APDS9960
-[submodule "ports/broadcom/peripherals"]
-	path = ports/broadcom/peripherals
-	url = https://github.com/adafruit/broadcom-peripherals.git
-	branch = main-build
 [submodule "rpi-firmware"]
 	path = ports/broadcom/firmware
 	url = https://github.com/raspberrypi/rpi-firmware.git
@@ -328,3 +324,7 @@
 [submodule "frozen/Adafruit_CircuitPython_SSD1680"]
 	path = frozen/Adafruit_CircuitPython_SSD1680
 	url = https://github.com/adafruit/Adafruit_CircuitPython_SSD1680
+[submodule "ports/broadcom/peripherals"]
+	path = ports/broadcom/peripherals
+	url = https://github.com/adafruit/broadcom-peripherals.git
+	branch = main-build
diff --git a/ports/broadcom/common-hal/busio/I2C.c b/ports/broadcom/common-hal/busio/I2C.c
index 3142fda145..64187f434b 100644
--- a/ports/broadcom/common-hal/busio/I2C.c
+++ b/ports/broadcom/common-hal/busio/I2C.c
@@ -98,7 +98,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
     self->sda_pin = sda;
     self->scl_pin = scl;
 
-    uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+    uint32_t source_clock = vcmailbox_get_clock_rate(VCMAILBOX_CLOCK_CORE);
     uint16_t clock_divider = source_clock / frequency;
     self->peripheral->DIV_b.CDIV = clock_divider;
 
diff --git a/ports/broadcom/common-hal/busio/SPI.c b/ports/broadcom/common-hal/busio/SPI.c
index 017674dfc0..5780ebe801 100644
--- a/ports/broadcom/common-hal/busio/SPI.c
+++ b/ports/broadcom/common-hal/busio/SPI.c
@@ -87,6 +87,8 @@ void common_hal_busio_spi_construct(busio_spi_obj_t *self,
         mp_raise_NotImplementedError(translate("Half duplex SPI is not implemented"));
     }
 
+    // BCM_VERSION != 2711 have 3 SPI but as listed in peripherals/gen/pins.c two are on
+    // index 0, once one index 0 SPI is found the other will throw an invalid_pins error.
     for (size_t i = 0; i < NUM_SPI; i++) {
         if (spi_in_use[i]) {
             continue;
@@ -157,6 +159,7 @@ void common_hal_busio_spi_deinit(busio_spi_obj_t *self) {
     common_hal_reset_pin(self->MOSI);
     common_hal_reset_pin(self->MISO);
     self->clock = NULL;
+    spi_in_use[self->index] = false;
 
     if (self->index == 1 ||
         self->index == 2) {
@@ -180,7 +183,7 @@ bool common_hal_busio_spi_configure(busio_spi_obj_t *self,
 
     if (self->index == 1 || self->index == 2) {
         SPI1_Type *p = aux_spi[self->index];
-        uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+        uint32_t source_clock = vcmailbox_get_clock_rate(VCMAILBOX_CLOCK_CORE);
         uint16_t clock_divider = source_clock / baudrate;
         if (source_clock % baudrate > 0) {
             clock_divider += 2;
@@ -198,7 +201,7 @@ bool common_hal_busio_spi_configure(busio_spi_obj_t *self,
         SPI0_Type *p = spi[self->index];
         p->CS = polarity << SPI0_CS_CPOL_Pos |
             phase << SPI0_CS_CPHA_Pos;
-        uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+        uint32_t source_clock = vcmailbox_get_clock_rate(VCMAILBOX_CLOCK_CORE);
         uint16_t clock_divider = source_clock / baudrate;
         if (source_clock % baudrate > 0) {
             clock_divider += 2;
diff --git a/ports/broadcom/common-hal/busio/UART.c b/ports/broadcom/common-hal/busio/UART.c
index 9f51f15acb..5be098cf03 100644
--- a/ports/broadcom/common-hal/busio/UART.c
+++ b/ports/broadcom/common-hal/busio/UART.c
@@ -124,7 +124,7 @@ void pl011_IRQHandler(uint8_t index) {
     // Clear the interrupt in case we weren't able to clear it by emptying the
     // FIFO. (This won't clear the FIFO.)
     ARM_UART_PL011_Type *pl011 = uart[index];
-    pl011->ICR = UART0_ICR_RXIC_Msk;
+    pl011->ICR = ARM_UART_PL011_ICR_RXIC_Msk;
 }
 
 void UART0_IRQHandler(void) {
@@ -258,31 +258,31 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
 
         common_hal_busio_uart_set_baudrate(self, baudrate);
 
-        uint32_t line_control = UART0_LCR_H_FEN_Msk;
-        line_control |= (bits - 5) << UART0_LCR_H_WLEN_Pos;
+        uint32_t line_control = ARM_UART_PL011_LCR_H_FEN_Msk;
+        line_control |= (bits - 5) << ARM_UART_PL011_LCR_H_WLEN_Pos;
         if (stop == 2) {
-            line_control |= UART0_LCR_H_STP2_Msk;
+            line_control |= ARM_UART_PL011_LCR_H_STP2_Msk;
         }
         if (parity != BUSIO_UART_PARITY_NONE) {
-            line_control |= UART0_LCR_H_PEN_Msk;
+            line_control |= ARM_UART_PL011_LCR_H_PEN_Msk;
         }
         if (parity == BUSIO_UART_PARITY_EVEN) {
-            line_control |= UART0_LCR_H_EPS_Msk;
+            line_control |= ARM_UART_PL011_LCR_H_EPS_Msk;
         }
         pl011->LCR_H = line_control;
 
-        uint32_t control = UART0_CR_UARTEN_Msk;
+        uint32_t control = ARM_UART_PL011_CR_UARTEN_Msk;
         if (tx != NULL) {
-            control |= UART0_CR_TXE_Msk;
+            control |= ARM_UART_PL011_CR_TXE_Msk;
         }
         if (rx != NULL) {
-            control |= UART0_CR_RXE_Msk;
+            control |= ARM_UART_PL011_CR_RXE_Msk;
         }
         if (cts != NULL) {
-            control |= UART0_CR_CTSEN_Msk;
+            control |= ARM_UART_PL011_CR_CTSEN_Msk;
         }
         if (rts != NULL) {
-            control |= UART0_CR_RTSEN_Msk;
+            control |= ARM_UART_PL011_CR_RTSEN_Msk;
         }
         pl011->CR = control;
     }
@@ -460,7 +460,7 @@ uint32_t common_hal_busio_uart_get_baudrate(busio_uart_obj_t *self) {
 
 void common_hal_busio_uart_set_baudrate(busio_uart_obj_t *self, uint32_t baudrate) {
     if (self->uart_id == 1) {
-        uint32_t source_clock = vcmailbox_get_clock_rate_measured(VCMAILBOX_CLOCK_CORE);
+        uint32_t source_clock = vcmailbox_get_clock_rate(VCMAILBOX_CLOCK_CORE);
         UART1->BAUD = ((source_clock / (baudrate * 8)) - 1);
     } else {
         ARM_UART_PL011_Type *pl011 = uart[self->uart_id];
diff --git a/ports/broadcom/common-hal/sdioio/SDCard.c b/ports/broadcom/common-hal/sdioio/SDCard.c
index 27b36041de..cf8bfb1faa 100644
--- a/ports/broadcom/common-hal/sdioio/SDCard.c
+++ b/ports/broadcom/common-hal/sdioio/SDCard.c
@@ -122,27 +122,27 @@ STATIC sdmmc_err_t _do_transaction(int slot, sdmmc_command_t *cmdinfo) {
         if (EMMC->STATUS_b.DAT_INHIBIT) {
             return SDMMC_ERR_BUSY;
         }
-        cmd_flags = EMMC_CMDTM_TM_BLKCNT_EN_Msk | EMMC_CMDTM_CMD_ISDATA_Msk;
+        cmd_flags = Arasan_EMMC_Distributor_CMDTM_TM_BLKCNT_EN_Msk | Arasan_EMMC_Distributor_CMDTM_CMD_ISDATA_Msk;
         if (cmdinfo->datalen > cmdinfo->blklen) {
-            cmd_flags |= EMMC_CMDTM_TM_MULTI_BLOCK_Msk;
+            cmd_flags |= Arasan_EMMC_Distributor_CMDTM_TM_MULTI_BLOCK_Msk;
             if ((cmdinfo->flags & SCF_AUTO_STOP) != 0) {
-                cmd_flags |= 1 << EMMC_CMDTM_TM_AUTO_CMD_EN_Pos;
+                cmd_flags |= 1 << Arasan_EMMC_Distributor_CMDTM_TM_AUTO_CMD_EN_Pos;
             }
         }
         if (read) {
-            cmd_flags |= EMMC_CMDTM_TM_DAT_DIR_Msk;
+            cmd_flags |= Arasan_EMMC_Distributor_CMDTM_TM_DAT_DIR_Msk;
         }
-        EMMC->BLKSIZECNT = (cmdinfo->datalen / cmdinfo->blklen) << EMMC_BLKSIZECNT_BLKCNT_Pos |
-            cmdinfo->blklen << EMMC_BLKSIZECNT_BLKSIZE_Pos;
+        EMMC->BLKSIZECNT = (cmdinfo->datalen / cmdinfo->blklen) << Arasan_EMMC_Distributor_BLKSIZECNT_BLKCNT_Pos |
+            cmdinfo->blklen << Arasan_EMMC_Distributor_BLKSIZECNT_BLKSIZE_Pos;
     }
 
     uint32_t response_type = EMMC_CMDTM_CMD_RSPNS_TYPE_RESPONSE_48BITS;
     uint32_t crc = 0;
     if ((cmdinfo->flags & SCF_RSP_CRC) != 0) {
-        crc |= EMMC_CMDTM_CMD_CRCCHK_EN_Msk;
+        crc |= Arasan_EMMC_Distributor_CMDTM_CMD_CRCCHK_EN_Msk;
     }
     if ((cmdinfo->flags & SCF_RSP_IDX) != 0) {
-        crc |= EMMC_CMDTM_CMD_IXCHK_EN_Msk;
+        crc |= Arasan_EMMC_Distributor_CMDTM_CMD_IXCHK_EN_Msk;
     }
     if ((cmdinfo->flags & SCF_RSP_136) != 0) {
         response_type = EMMC_CMDTM_CMD_RSPNS_TYPE_RESPONSE_136BITS;
@@ -152,8 +152,8 @@ STATIC sdmmc_err_t _do_transaction(int slot, sdmmc_command_t *cmdinfo) {
         response_type = EMMC_CMDTM_CMD_RSPNS_TYPE_RESPONSE_NONE;
     }
     uint32_t full_cmd = cmd_flags | crc |
-        cmdinfo->opcode << EMMC_CMDTM_CMD_INDEX_Pos |
-        response_type << EMMC_CMDTM_CMD_RSPNS_TYPE_Pos;
+        cmdinfo->opcode << Arasan_EMMC_Distributor_CMDTM_CMD_INDEX_Pos |
+        response_type << Arasan_EMMC_Distributor_CMDTM_CMD_RSPNS_TYPE_Pos;
     EMMC->CMDTM = full_cmd;
 
     // Wait for an interrupt to indicate completion of the command.
@@ -170,7 +170,7 @@ STATIC sdmmc_err_t _do_transaction(int slot, sdmmc_command_t *cmdinfo) {
         }
         return SDMMC_ERR_TIMEOUT;
     } else {
-        EMMC->INTERRUPT = EMMC_INTERRUPT_CMD_DONE_Msk;
+        EMMC->INTERRUPT = Arasan_EMMC_Distributor_INTERRUPT_CMD_DONE_Msk;
     }
 
     // Transfer the data.
@@ -197,7 +197,7 @@ STATIC sdmmc_err_t _do_transaction(int slot, sdmmc_command_t *cmdinfo) {
                 EMMC->DATA = ((uint32_t *)cmdinfo->data)[i];
             }
         }
-        uint32_t data_done_mask = EMMC_INTERRUPT_ERR_Msk | EMMC_INTERRUPT_DATA_DONE_Msk;
+        uint32_t data_done_mask = Arasan_EMMC_Distributor_INTERRUPT_ERR_Msk | Arasan_EMMC_Distributor_INTERRUPT_DATA_DONE_Msk;
         start_ticks = port_get_raw_ticks(NULL);
         while ((EMMC->INTERRUPT & data_done_mask) == 0 && (port_get_raw_ticks(NULL) - start_ticks) < (size_t)cmdinfo->timeout_ms) {
         }
@@ -282,7 +282,7 @@ void common_hal_sdioio_sdcard_construct(sdioio_sdcard_obj_t *self,
 
     }
     // Set max timeout
-    EMMC->CONTROL1 |= EMMC_CONTROL1_CLK_INTLEN_Msk | (0xe << EMMC_CONTROL1_DATA_TOUNIT_Pos);
+    EMMC->CONTROL1 |= Arasan_EMMC_Distributor_CONTROL1_CLK_INTLEN_Msk | (0xe << Arasan_EMMC_Distributor_CONTROL1_DATA_TOUNIT_Pos);
 
     EMMC->IRPT_MASK = 0xffffffff;
 
diff --git a/ports/broadcom/peripherals b/ports/broadcom/peripherals
index 0837008608..d3a6b50a21 160000
--- a/ports/broadcom/peripherals
+++ b/ports/broadcom/peripherals
@@ -1 +1 @@
-Subproject commit 08370086080759ed54ac1136d62d2ad24c6fa267
+Subproject commit d3a6b50a21e7dd49ba4bfa0374da3407594caa50