djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

shorten safe mode messages; improve message printing; fix CIRCUITPY_SAFEMODE_PY=0

Browse Source
This commit is contained in:
Dan Halbert 2023-02-13 21:29:57 -05:00
parent d8231f1588
commit d46d9d5c21
6 changed files with 88 additions and 89 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
locale/circuitpython.pot
View File

@ -31,14 +31,20 @@ msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Please file an issue with the contents of your CIRCUITPY drive at \n"
"https://github.com/adafruit/circuitpython/issues\n"
"Please file an issue with your program at https://github.com/adafruit/"
"circuitpython/issues."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"To exit, reset the board without requesting safe mode."
"Press reset to exit safe mode.\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"You are in safe mode because:\n"
msgstr ""
#: py/obj.c
@ -536,10 +542,6 @@ msgstr ""
msgid "Attempt to allocate %d blocks"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Attempted heap allocation when VM not running."
msgstr ""
#: ports/raspberrypi/audio_dma.c
msgid "Audio conversion not implemented"
msgstr ""
@ -588,7 +590,7 @@ msgid "Bitmap size and bits per value must match"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Boot device must be first device (interface #0)."
msgid "Boot device must be first (interface #0)."
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
@ -790,10 +792,6 @@ msgstr ""
msgid "CircuitPython core code crashed hard. Whoops!\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "CircuitPython was unable to allocate the heap."
msgstr ""
#: shared-module/bitbangio/I2C.c
msgid "Clock stretch too long"
msgstr ""
@ -832,10 +830,6 @@ msgstr ""
msgid "Couldn't allocate decoder"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Crash into the HardFault_Handler."
msgstr ""
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr ""
@ -1003,6 +997,10 @@ msgstr ""
msgid "Failed to write internal flash."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Fault detected by hardware."
msgstr ""
#: py/moduerrno.c
msgid "File exists"
msgstr ""
@ -1088,6 +1086,15 @@ msgstr ""
msgid "Hardware in use, try alternative pins"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Heap allocation when VM not running."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"Heap was corrupted because the stack was too small. Increase stack size."
msgstr ""
#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr ""
@ -1993,15 +2000,7 @@ msgid "Temperature read timed out"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
"Increase the stack size if you know how. If not:"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The `microcontroller` module was used to boot into safe mode. Press reset to "
"exit safe mode."
msgid "The `microcontroller` module was used to boot into safe mode."
msgstr ""
#: py/obj.c
@ -2013,10 +2012,7 @@ msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The microcontroller's power dipped. Make sure your power supply provides\n"
"enough power for the whole circuit and press reset (after ejecting "
"CIRCUITPY)."
msgid "The power dipped. Make sure you are providing enough power."
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
@ -2162,6 +2158,10 @@ msgstr ""
msgid "Unable to allocate buffers for signed conversion"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Unable to allocate the heap."
msgstr ""
#: ports/espressif/common-hal/busio/I2C.c
msgid "Unable to create lock"
msgstr ""
@ -2367,10 +2367,6 @@ msgstr ""
msgid "Writes not supported on Characteristic"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "You are in safe mode because:\n"
msgstr ""
#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
@ -2385,7 +2381,7 @@ msgid "You pressed button A at start up."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "You pressed the BOOT button at start up."
msgid "You pressed the BOOT button at start up"
msgstr ""
#: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h

6
py/circuitpy_defns.mk
View File

@ -525,12 +525,16 @@ $(filter $(SRC_PATTERNS), \
qrio/PixelPolicy.c \
qrio/QRInfo.c \
supervisor/RunReason.c \
supervisor/SafeModeReason.c \
supervisor/StatusBar.c \
wifi/AuthMode.c \
wifi/Packet.c \
)
ifeq ($(CIRCUITPY_SAFEMODE_PY),1)
SRC_BINDINGS_ENUMS += \
supervisor/SafeModeReason.c
endif
SRC_BINDINGS_ENUMS += \
util.c

5
shared-bindings/supervisor/Runtime.c
View File

@ -117,7 +117,10 @@ MP_PROPERTY_GETTER(supervisor_runtime_run_reason_obj,
(mp_obj_t)&supervisor_runtime_get_run_reason_obj);
//| safe_mode_reason: SafeModeReason
//| """Why CircuitPython went into safe mode this particular time (read-only)."""
//| """Why CircuitPython went into safe mode this particular time (read-only).
//|
//| **Limitations**: Raises ``NotImplementedError`` on builds that do not implement ``safemode.py``.
//| """
STATIC mp_obj_t supervisor_runtime_get_safe_mode_reason(mp_obj_t self) {
#if CIRCUITPY_SAFEMODE_PY
return cp_enum_find(&supervisor_safe_mode_reason_type, get_safe_mode());

10
shared-bindings/supervisor/SafeModeReason.c
View File

@ -31,7 +31,6 @@
// Reuse the non-Python safe_mode_t enum
#include "supervisor/shared/safe_mode.h"
#if CIRCUITPY_SAFEMODE_PY
MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, NONE, SAFE_MODE_NONE);
MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, BROWNOUT, SAFE_MODE_BROWNOUT);
// alphabetical from here down
@ -50,16 +49,16 @@ MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, USB_TOO_MANY
MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, USB_TOO_MANY_INTERFACE_NAMES, SAFE_MODE_USB_TOO_MANY_INTERFACE_NAMES);
MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, USER, SAFE_MODE_USER);
MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, WATCHDOG, SAFE_MODE_WATCHDOG);
#endif
//| class SafeModeReason:
//| """The reason that CircuitPython went into safe mode."""
//| """The reason that CircuitPython went into safe mode.
//|
//| **Limitations**: Class not available on builds that do not implement ``safemode.py``.
//| """
//|
MAKE_ENUM_MAP(supervisor_safe_mode_reason) {
#if CIRCUITPY_SAFEMODE_PY
//| NONE: object
//| """CircuitPython is not in safe mode."""
//|
@ -146,7 +145,6 @@ MAKE_ENUM_MAP(supervisor_safe_mode_reason) {
//| """An internal watchdog timer expired."""
//|
MAKE_ENUM_MAP_ENTRY(safe_mode_reason, WATCHDOG),
#endif
};
STATIC MP_DEFINE_CONST_DICT(supervisor_safe_mode_reason_locals_dict, supervisor_safe_mode_reason_locals_table);

2
shared-bindings/supervisor/__init__.c
View File

@ -339,7 +339,7 @@ STATIC const mp_rom_map_elem_t supervisor_module_globals_table[] = {
#if CIRCUITPY_SAFEMODE_PY
{ MP_ROM_QSTR(MP_QSTR_SafeModeReason), MP_ROM_PTR(&supervisor_safe_mode_reason_type) },
#else
{ MP_ROM_QSTR(MP_QSTR_SafeModeReason), mp_const_none },
{ MP_ROM_QSTR(MP_QSTR_SafeModeReason), MP_ROM_NONE },
#endif
{ MP_ROM_QSTR(MP_QSTR_set_next_code_file), MP_ROM_PTR(&supervisor_set_next_code_file_obj) },
{ MP_ROM_QSTR(MP_QSTR_ticks_ms), MP_ROM_PTR(&supervisor_ticks_ms_obj) },

42
supervisor/shared/safe_mode.c
View File

@ -145,8 +145,7 @@ void print_safe_mode_message(safe_mode_t reason) {
return;
}
serial_write("\r\n");
serial_write_compressed(translate("You are in safe mode because:\n"));
serial_write_compressed(translate("\nYou are in safe mode because:\n"));
const compressed_string_t *message = NULL;
@ -154,29 +153,31 @@ void print_safe_mode_message(safe_mode_t reason) {
switch (reason) {
case SAFE_MODE_BROWNOUT:
message = translate("The microcontroller's power dipped. Make sure your power supply provides\nenough power for the whole circuit and press reset (after ejecting CIRCUITPY).");
message = translate("The power dipped. Make sure you are providing enough power.");
break;
case SAFE_MODE_USER:
#if defined(BOARD_USER_SAFE_MODE_ACTION)
message = BOARD_USER_SAFE_MODE_ACTION;
#elif defined(CIRCUITPY_BOOT_BUTTON)
message = translate("You pressed the BOOT button at start up.");
message = translate("You pressed the BOOT button at start up");
#else
message = translate("You pressed the reset button during boot.");
#endif
serial_write_compressed(message);
message = translate("\nTo exit, reset the board without requesting safe mode.");
// The final piece is printed below.
break;
case SAFE_MODE_NO_CIRCUITPY:
message = translate("CIRCUITPY drive could not be found or created.");
break;
case SAFE_MODE_PROGRAMMATIC:
message = translate("The `microcontroller` module was used to boot into safe mode. Press reset to exit safe mode.");
message = translate("The `microcontroller` module was used to boot into safe mode.");
break;
#if CIRCUITPY_SAFEMODE_PY
case SAFE_MODE_SAFEMODE_PY_ERROR:
message = translate("Error in safemode.py.");
break;
#endif
case SAFE_MODE_STACK_OVERFLOW:
message = translate("Heap was corrupted because the stack was too small. Increase stack size.");
break;
case SAFE_MODE_USB_TOO_MANY_ENDPOINTS:
message = translate("USB devices need more endpoints than are available.");
break;
@ -184,7 +185,7 @@ void print_safe_mode_message(safe_mode_t reason) {
message = translate("USB devices specify too many interface names.");
break;
case SAFE_MODE_USB_BOOT_DEVICE_NOT_INTERFACE_ZERO:
message = translate("Boot device must be first device (interface #0).");
message = translate("Boot device must be first (interface #0).");
break;
case SAFE_MODE_WATCHDOG:
message = translate("Internal watchdog timer expired.");
@ -194,24 +195,20 @@ void print_safe_mode_message(safe_mode_t reason) {
}
if (message) {
// Non-crash safe mode.
serial_write_compressed(message);
serial_write("\r\n");
return;
}
} else {
// Something worse happened.
serial_write_compressed(translate("CircuitPython core code crashed hard. Whoops!\n"));
switch (reason) {
case SAFE_MODE_GC_ALLOC_OUTSIDE_VM:
message = translate("Attempted heap allocation when VM not running.");
message = translate("Heap allocation when VM not running.");
break;
case SAFE_MODE_FLASH_WRITE_FAIL:
message = translate("Failed to write internal flash.");
break;
case SAFE_MODE_HARD_FAULT:
message = translate("Crash into the HardFault_Handler.");
message = translate("Fault detected by hardware.");
break;
case SAFE_MODE_INTERRUPT_ERROR:
message = translate("Interrupt error.");
@ -220,18 +217,19 @@ void print_safe_mode_message(safe_mode_t reason) {
message = translate("NLR jump failed. Likely memory corruption.");
break;
case SAFE_MODE_NO_HEAP:
message = translate("CircuitPython was unable to allocate the heap.");
message = translate("Unable to allocate the heap.");
break;
case SAFE_MODE_SDK_FATAL_ERROR:
message = translate("Third-party firmware fatal error.");
break;
case SAFE_MODE_STACK_OVERFLOW:
message = translate("The CircuitPython heap was corrupted because the stack was too small.\nIncrease the stack size if you know how. If not:");
break;
default:
message = translate("Unknown reason.");
break;
}
serial_write_compressed(message);
serial_write_compressed(translate("\nPlease file an issue with the contents of your CIRCUITPY drive at \nhttps://github.com/adafruit/circuitpython/issues\n"));
serial_write_compressed(translate("\nPlease file an issue with your program at https://github.com/adafruit/circuitpython/issues."));
}
// Always tell user how to get out of safe mode.
serial_write_compressed(translate("\nPress reset to exit safe mode.\n"));
}