diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index abadd83b6a..2343144dfa 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -2391,6 +2391,10 @@ msgstr ""
 msgid "You pressed the GPIO0 button at start up."
 msgstr ""
 
+#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
+msgid "You pressed the Rec button at start up."
+msgstr ""
+
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
 msgstr ""
diff --git a/ports/espressif/boards/espressif_esp32_lyrat/board.c b/ports/espressif/boards/espressif_esp32_lyrat/board.c
new file mode 100644
index 0000000000..8c0c8b8b0b
--- /dev/null
+++ b/ports/espressif/boards/espressif_esp32_lyrat/board.c
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Radio Sound, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "components/driver/include/driver/gpio.h"
+#include "components/hal/include/hal/gpio_hal.h"
+#include "common-hal/microcontroller/Pin.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
diff --git a/ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h b/ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
new file mode 100644
index 0000000000..7835e93f21
--- /dev/null
+++ b/ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
@@ -0,0 +1,50 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Radio Sound, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Espressif ESP32-LyraT"
+#define MICROPY_HW_MCU_NAME         "ESP32"
+
+#define MICROPY_HW_LED_STATUS (&pin_GPIO22)
+
+#define CIRCUITPY_BOARD_I2C         (1)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO23, .sda = &pin_GPIO18}}
+
+#define CIRCUITPY_BOARD_SPI         (1)
+#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO14, .mosi = &pin_GPIO13, .miso = &pin_GPIO12}}
+
+#define CIRCUITPY_BOARD_UART        (0)
+
+// For entering safe mode, use Rec button
+#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO36)
+
+// Explanation of how a user got into safe mode
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the Rec button at start up.")
+
+// UART pins attached to the USB-serial converter chip
+#define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)
+#define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3)
diff --git a/ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.mk b/ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.mk
new file mode 100644
index 0000000000..e9fcd24e61
--- /dev/null
+++ b/ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.mk
@@ -0,0 +1,10 @@
+CIRCUITPY_CREATOR_ID =  0x000C303A
+CIRCUITPY_CREATION_ID = 0x0032A000
+
+IDF_TARGET = esp32
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 40m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+
+CIRCUITPY_ESPCAMERA = 0
diff --git a/ports/espressif/boards/espressif_esp32_lyrat/pins.c b/ports/espressif/boards/espressif_esp32_lyrat/pins.c
new file mode 100644
index 0000000000..afef90e480
--- /dev/null
+++ b/ports/espressif/boards/espressif_esp32_lyrat/pins.c
@@ -0,0 +1,56 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // External pins are in silkscreen order, from top to bottom, left side, then right side
+    { MP_ROM_QSTR(MP_QSTR_CS0), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO23) },
+    { MP_ROM_QSTR(MP_QSTR_D23), MP_ROM_PTR(&pin_GPIO23) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO25) },
+
+    { MP_ROM_QSTR(MP_QSTR_D26), MP_ROM_PTR(&pin_GPIO26) },
+
+    { MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO22) },
+    { MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_GPIO22) },
+    { MP_ROM_QSTR(MP_QSTR_D22), MP_ROM_PTR(&pin_GPIO22) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_REC), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_SW36), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_MODE), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_SW39), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
diff --git a/ports/espressif/boards/espressif_esp32_lyrat/sdkconfig b/ports/espressif/boards/espressif_esp32_lyrat/sdkconfig
new file mode 100644
index 0000000000..4b2981ba62
--- /dev/null
+++ b/ports/espressif/boards/espressif_esp32_lyrat/sdkconfig
@@ -0,0 +1,37 @@
+CONFIG_ESP32_SPIRAM_SUPPORT=y
+# SPI RAM config
+#
+CONFIG_SPIRAM_TYPE_AUTO=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
+CONFIG_SPIRAM_SIZE=4194304
+CONFIG_SPIRAM_SPEED_40M=y
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+CONFIG_SPIRAM_IGNORE_NOTFOUND=y
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
+# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
+CONFIG_SPIRAM_CACHE_WORKAROUND=y
+
+# Uncomment (remove ###) to send ESP_LOG  output to TX/RX pins
+### #
+### # ESP System Settings
+### #
+### CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y
+### # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
+### CONFIG_ESP_CONSOLE_UART_CUSTOM=y
+### # CONFIG_ESP_CONSOLE_NONE is not set
+### CONFIG_ESP_CONSOLE_UART=y
+### CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_0=y
+### # CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_1 is not set
+### CONFIG_ESP_CONSOLE_UART_NUM=0
+### CONFIG_ESP_CONSOLE_UART_TX_GPIO=8
+### CONFIG_ESP_CONSOLE_UART_RX_GPIO=7
+### CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
+### # CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
+### # end of ESP System Settings