djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

revise boards/ files for 3.0. All now compiled (but I don't have all to test).

Browse Source
This commit is contained in:
Dan Halbert 2018-01-04 14:16:53 -05:00
parent 19d353ccd9
commit d0cc8abd31
27 changed files with 102 additions and 1486 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ports/atmel-samd/boards/arduino_zero/mpconfigboard.h
View File

@ -1,5 +1,3 @@
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Arduino Zero" #define MICROPY_HW_BOARD_NAME "Arduino Zero"
#define MICROPY_HW_MCU_NAME "samd21g18" #define MICROPY_HW_MCU_NAME "samd21g18"

2
ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
View File

@ -1,5 +1,3 @@
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Adafruit CircuitPlayground Express" #define MICROPY_HW_BOARD_NAME "Adafruit CircuitPlayground Express"
#define MICROPY_HW_MCU_NAME "samd21g18" #define MICROPY_HW_MCU_NAME "samd21g18"

3
ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.h
View File

@ -1,8 +1,5 @@
// LEDs // LEDs
//#define MICROPY_HW_LED_MSC PIN_PA17 // red //#define MICROPY_HW_LED_MSC PIN_PA17 // red
// #define UART_REPL
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Adalogger" #define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Adalogger"
#define MICROPY_HW_MCU_NAME "samd21g18" #define MICROPY_HW_MCU_NAME "samd21g18"

2
ports/atmel-samd/boards/feather_m0_basic/mpconfigboard.h
View File

@ -1,7 +1,5 @@
// LEDs // LEDs
//#define MICROPY_HW_LED_MSC PIN_PA17 // red //#define MICROPY_HW_LED_MSC PIN_PA17 // red
// #define UART_REPL
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Basic" #define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Basic"
#define MICROPY_HW_MCU_NAME "samd21g18" #define MICROPY_HW_MCU_NAME "samd21g18"

115
ports/atmel-samd/boards/feather_m0_supersized/conf_access.h
View File

@ -1,115 +0,0 @@
/**
* \file
*
* \brief Memory access control configuration file.
*
* Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_ACCESS_H_
#define _CONF_ACCESS_H_
#include "compiler.h"
#include "board.h"
/*! \name Activation of Logical Unit Numbers
*/
//! @{
#define LUN_0 ENABLE //!< On-Chip Virtual Memory.
#define LUN_1 DISABLE //!< AT45DBX Data Flash.
#define LUN_2 DISABLE //!< SD/MMC Card over SPI.
#define LUN_3 DISABLE //!< SD/MMC Card over MCI Slot 0.
#define LUN_4 DISABLE
#define LUN_5 DISABLE
#define LUN_6 DISABLE
#define LUN_7 DISABLE
#define LUN_USB DISABLE //!< Host Mass-Storage Memory.
//! @}
/*! \name LUN 0 Definitions
*/
//! @{
#define LUN_0_INCLUDE "access_vfs.h"
#define Lun_0_test_unit_ready vfs_test_unit_ready
#define Lun_0_read_capacity vfs_read_capacity
#define Lun_0_unload NULL
#define Lun_0_wr_protect vfs_wr_protect
#define Lun_0_removal vfs_removal
#define Lun_0_usb_read_10 vfs_usb_read_10
#define Lun_0_usb_write_10 vfs_usb_write_10
#define LUN_0_NAME "\"CircuitPython VFS[0]\""
//! @}
#define MEM_USB LUN_USB
/*! \name Actions Associated with Memory Accesses
*
* Write here the action to associate with each memory access.
*
* \warning Be careful not to waste time in order not to disturb the functions.
*/
//! @{
#define memory_start_read_action(nb_sectors)
#define memory_stop_read_action()
#define memory_start_write_action(nb_sectors)
#define memory_stop_write_action()
//! @}
/*! \name Activation of Interface Features
*/
//! @{
#define ACCESS_USB true //!< MEM <-> USB interface.
#define ACCESS_MEM_TO_RAM false //!< MEM <-> RAM interface.
#define ACCESS_STREAM false //!< Streaming MEM <-> MEM interface.
#define ACCESS_STREAM_RECORD false //!< Streaming MEM <-> MEM interface in record mode.
#define ACCESS_MEM_TO_MEM false //!< MEM <-> MEM interface.
#define ACCESS_CODEC false //!< Codec interface.
//! @}
/*! \name Specific Options for Access Control
*/
//! @{
#define GLOBAL_WR_PROTECT false //!< Management of a global write protection.
//! @}
#endif // _CONF_ACCESS_H_

14
ports/atmel-samd/boards/feather_m0_supersized/conf_board.h
View File

@ -1,14 +0,0 @@
/**
* \file
*
* \brief User board configuration template
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CONF_BOARD_H
#define CONF_BOARD_H
#endif // CONF_BOARD_H

1
ports/atmel-samd/boards/feather_m0_supersized/conf_clocks.h
View File

@ -1 +0,0 @@
#include "conf_clocks_external_32k.h"

220
ports/atmel-samd/boards/feather_m0_supersized/conf_usb.h
View File

@ -1,220 +0,0 @@
#include <stdbool.h>
#include <stdint.h>
#include "asf/common/services/usb/class/cdc/usb_protocol_cdc.h"
#ifndef CONF_USB_H_INCLUDED
#define CONF_USB_H_INCLUDED
#define USB_DEVICE_MAJOR_VERSION 1
#define USB_DEVICE_MINOR_VERSION 0
#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA)
#define USB_DEVICE_ATTR \
(USB_CONFIG_ATTR_BUS_POWERED)
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
//! USB Device string definitions (Optional)
#ifndef USB_DEVICE_MANUFACTURE_NAME
# define USB_DEVICE_MANUFACTURE_NAME "Dave Astels"
#endif
#ifndef USB_DEVICE_PRODUCT_NAME
# define USB_DEVICE_PRODUCT_NAME "Hacked Feather M0 Express with 8Mbyte SPI flash"
#endif
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 32
extern char serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
//! Control endpoint size
#define USB_DEVICE_EP_CTRL_SIZE 64
//! Interfaces for this device (CDC COM + CDC DATA + MSC + HID mouse + HID kbd)
#define USB_DEVICE_NB_INTERFACE 5
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
// (4 | USB_EP_DIR_IN) // CDC TX
// (5 | USB_EP_DIR_OUT) // CDC RX
// (1 | USB_EP_DIR_IN) // MSC IN
// (2 | USB_EP_DIR_OUT) // MSC OUT
// (6 | USB_EP_DIR_IN) // HID mouse report
// (7 | USB_EP_DIR_IN) // HID keyboard report
#define USB_DEVICE_MAX_EP 7
#define UDI_CDC_PORT_NB 1
#define UDI_CDC_ENABLE_EXT(port) mp_cdc_enable(port)
extern bool mp_cdc_enable(uint8_t port);
#define UDI_CDC_DISABLE_EXT(port) mp_cdc_disable(port)
extern void mp_cdc_disable(uint8_t port);
#define UDI_CDC_LOW_RATE
#define UDI_CDC_DEFAULT_RATE 115200
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
#define UDI_CDC_DEFAULT_DATABITS 8
#define UDI_CDC_RX_NOTIFY(port) usb_rx_notify()
void usb_rx_notify(void);
#define UDI_CDC_SET_CODING_EXT(port,cfg) usb_coding_notify(port, cfg)
void usb_coding_notify(uint8_t port, usb_cdc_line_coding_t* coding);
#define UDI_CDC_SET_DTR_EXT(port,set) usb_dtr_notify(port, set)
void usb_dtr_notify(uint8_t port, bool set);
#define UDI_CDC_SET_RTS_EXT(port,set) usb_rts_notify(port, set)
void usb_rts_notify(uint8_t port, bool set);
/**
* USB CDC low level configuration
* In standalone these configurations are defined by the CDC module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
#define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT) // RX
//! Interface numbers
#define UDI_CDC_COMM_IFACE_NUMBER_0 0
#define UDI_CDC_DATA_IFACE_NUMBER_0 1
/**
* Configuration of MSC interface
* @{
*/
//! Vendor name and Product version of MSC interface
#define UDI_MSC_GLOBAL_VENDOR_ID \
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0'
//! Interface callback definition
#define UDI_MSC_ENABLE_EXT() mp_msc_enable()
extern bool mp_msc_enable(void);
#define UDI_MSC_DISABLE_EXT() mp_msc_disable()
extern void mp_msc_disable(void);
//! Enable id string of interface to add an extra USB string
#define UDI_MSC_STRING_ID 5
/**
* USB MSC low level configuration
* In standalone these configurations are defined by the MSC module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
//! Interface number
#define UDI_MSC_IFACE_NUMBER 2
/**
* Configuration of HID Mouse interface
* @{
*/
//! Interface callback definition
#define UDI_HID_MOUSE_ENABLE_EXT() mp_mouse_enable()
extern bool mp_mouse_enable(void);
#define UDI_HID_MOUSE_DISABLE_EXT() mp_mouse_disable()
extern void mp_mouse_disable(void);
//! Enable id string of interface to add an extra USB string
#define UDI_HID_MOUSE_STRING_ID 6
/**
* USB HID Mouse low level configuration
* In standalone these configurations are defined by the HID Mouse module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_HID_MOUSE_EP_IN (6 | USB_EP_DIR_IN)
//! Interface number
#define UDI_HID_MOUSE_IFACE_NUMBER 3
//@}
//@}
/**
* Configuration of HID Keyboard interface
* @{
*/
//! Interface callback definition
#define UDI_HID_KBD_ENABLE_EXT() mp_keyboard_enable()
extern bool mp_keyboard_enable(void);
#define UDI_HID_KBD_DISABLE_EXT() mp_keyboard_disable()
extern void mp_keyboard_disable(void);
#define UDI_HID_KBD_CHANGE_LED(value) mp_keyboard_led(value)
extern void mp_keyboard_led(uint8_t);
//! Enable id string of interface to add an extra USB string
#define UDI_HID_KBD_STRING_ID 7
/**
* USB HID Keyboard low level configuration
* In standalone these configurations are defined by the HID Keyboard module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_HID_KBD_EP_IN (7 | USB_EP_DIR_IN)
//! Interface number
#define UDI_HID_KBD_IFACE_NUMBER 4
/**
* Description of Composite Device
* @{
*/
//! USB Interfaces descriptor structure
#define UDI_COMPOSITE_DESC_T \
usb_iad_desc_t udi_cdc_iad; \
udi_cdc_comm_desc_t udi_cdc_comm; \
udi_cdc_data_desc_t udi_cdc_data; \
udi_msc_desc_t udi_msc; \
udi_hid_mouse_desc_t udi_hid_mouse; \
udi_hid_kbd_desc_t udi_hid_kbd
//! USB Interfaces descriptor value for Full Speed
#define UDI_COMPOSITE_DESC_FS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
.udi_msc = UDI_MSC_DESC_FS, \
.udi_hid_mouse = UDI_HID_MOUSE_DESC, \
.udi_hid_kbd = UDI_HID_KBD_DESC
//! USB Interfaces descriptor value for High Speed
#define UDI_COMPOSITE_DESC_HS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
.udi_msc = UDI_MSC_DESC_HS, \
.udi_hid_mouse = UDI_HID_MOUSE_DESC, \
.udi_hid_kbd = UDI_HID_KBD_DESC
//! USB Interface APIs
#define UDI_COMPOSITE_API \
&udi_api_cdc_comm, \
&udi_api_cdc_data, \
&udi_api_msc, \
&udi_api_hid_mouse, \
&udi_api_hid_kbd
//@}
/**
* USB Device Driver Configuration
* @{
*/
//@}
//! The includes of classes and other headers must be done at the end of this file to avoid compile error
#include "udi_cdc.h"
#include "udi_msc.h"
#include "udi_hid_mouse.h"
#include "udi_hid_kbd.h"
#endif

39
ports/atmel-samd/boards/feather_m0_supersized/mpconfigboard.h
View File

@ -1,33 +1,44 @@
/* Adafruit Feather M0 Express with an 8MB SPI flash instead of the usual 2MB */ /* Adafruit Feather M0 Express with an 8MB SPI flash instead of the usual 2MB */
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Hacked Feather M0 Express with 8Mbyte SPI flash" #define MICROPY_HW_BOARD_NAME "Hacked Feather M0 Express with 8Mbyte SPI flash"
#define MICROPY_HW_MCU_NAME "samd21g18" #define MICROPY_HW_MCU_NAME "samd21g18"
#define MICROPY_HW_NEOPIXEL (&pin_PA06) #define MICROPY_HW_NEOPIXEL (&pin_PA06)
// Salae reads 12mhz which is the limit even though we set it to the safer 8mhz. // Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz.
#define SPI_FLASH_BAUDRATE (8000000) #define SPI_FLASH_BAUDRATE (8000000)
#define SPI_FLASH_MUX_SETTING SPI_SIGNAL_MUX_SETTING_C #define SPI_FLASH_MOSI_PIN PIN_PA08
#define SPI_FLASH_PAD0_PINMUX PINMUX_PA08D_SERCOM2_PAD0 // MOSI #define SPI_FLASH_MISO_PIN PIN_PA14
// Use default pinmux for the chip select since we manage it ourselves. #define SPI_FLASH_SCK_PIN PIN_PA09
#define SPI_FLASH_PAD1_PINMUX PINMUX_PA09D_SERCOM2_PAD1 // SCK #define SPI_FLASH_CS_PIN PIN_PA13
#define SPI_FLASH_PAD2_PINMUX PINMUX_PA14C_SERCOM2_PAD2 // MISO #define SPI_FLASH_MOSI_PIN_FUNCTION PINMUX_PA08D_SERCOM2_PAD0
#define SPI_FLASH_PAD3_PINMUX PINMUX_UNUSED // SCK #define SPI_FLASH_MISO_PIN_FUNCTION PINMUX_PA14C_SERCOM2_PAD2
#define SPI_FLASH_SERCOM SERCOM2 #define SPI_FLASH_SCK_PIN_FUNCTION PINMUX_PA09D_SERCOM2_PAD1
#define SPI_FLASH_SERCOM SERCOM2
#define SPI_FLASH_SERCOM_INDEX 2
#define SPI_FLASH_MOSI_PAD 0
#define SPI_FLASH_MISO_PAD 2
#define SPI_FLASH_SCK_PAD 1
// <o> Transmit Data Pinout
// <0x0=>PAD[0,1]_DO_SCK
// <0x1=>PAD[2,3]_DO_SCK
// <0x2=>PAD[3,1]_DO_SCK
// <0x3=>PAD[0,3]_DO_SCK
#define SPI_FLASH_DOPO 0
#define SPI_FLASH_DIPO 2 // same as MISO pad
#define SPI_FLASH_CS PIN_PA13 // These are pins not to reset.
#define MICROPY_PORT_A (PORT_PA06 | PORT_PA08 | PORT_PA09 | PORT_PA13 | PORT_PA14 | PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_A (PORT_PA06 | PORT_PA08 | PORT_PA09 | PORT_PA14 | PORT_PA13 | PORT_PA14 | PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_B ( 0 ) #define MICROPY_PORT_B ( 0 )
#define MICROPY_PORT_C ( 0 )
#include "spi_flash.h" #include "spi_flash.h"
// If you change this, then make sure to update the linker scripts as well to // If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code. // make sure you don't overwrite code.
#define CIRCUITPY_INTERNAL_NVM_SIZE 256 // #define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define CIRCUITPY_INTERNAL_NVM_SIZE 0
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE) #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)

2
ports/atmel-samd/boards/gemma_m0/mpconfigboard.h
View File

@ -1,5 +1,3 @@
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Adafruit Gemma M0" #define MICROPY_HW_BOARD_NAME "Adafruit Gemma M0"
#define MICROPY_HW_MCU_NAME "samd21e18" #define MICROPY_HW_MCU_NAME "samd21e18"

115
ports/atmel-samd/boards/itsybitsy_m0/conf_access.h
View File

@ -1,115 +0,0 @@
/**
* \file
*
* \brief Memory access control configuration file.
*
* Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_ACCESS_H_
#define _CONF_ACCESS_H_
#include "compiler.h"
#include "board.h"
/*! \name Activation of Logical Unit Numbers
*/
//! @{
#define LUN_0 ENABLE //!< On-Chip Virtual Memory.
#define LUN_1 DISABLE //!< AT45DBX Data Flash.
#define LUN_2 DISABLE //!< SD/MMC Card over SPI.
#define LUN_3 DISABLE //!< SD/MMC Card over MCI Slot 0.
#define LUN_4 DISABLE
#define LUN_5 DISABLE
#define LUN_6 DISABLE
#define LUN_7 DISABLE
#define LUN_USB DISABLE //!< Host Mass-Storage Memory.
//! @}
/*! \name LUN 0 Definitions
*/
//! @{
#define LUN_0_INCLUDE "access_vfs.h"
#define Lun_0_test_unit_ready vfs_test_unit_ready
#define Lun_0_read_capacity vfs_read_capacity
#define Lun_0_unload NULL
#define Lun_0_wr_protect vfs_wr_protect
#define Lun_0_removal vfs_removal
#define Lun_0_usb_read_10 vfs_usb_read_10
#define Lun_0_usb_write_10 vfs_usb_write_10
#define LUN_0_NAME "\"MicroPython VFS[0]\""
//! @}
#define MEM_USB LUN_USB
/*! \name Actions Associated with Memory Accesses
*
* Write here the action to associate with each memory access.
*
* \warning Be careful not to waste time in order not to disturb the functions.
*/
//! @{
#define memory_start_read_action(nb_sectors)
#define memory_stop_read_action()
#define memory_start_write_action(nb_sectors)
#define memory_stop_write_action()
//! @}
/*! \name Activation of Interface Features
*/
//! @{
#define ACCESS_USB true //!< MEM <-> USB interface.
#define ACCESS_MEM_TO_RAM false //!< MEM <-> RAM interface.
#define ACCESS_STREAM false //!< Streaming MEM <-> MEM interface.
#define ACCESS_STREAM_RECORD false //!< Streaming MEM <-> MEM interface in record mode.
#define ACCESS_MEM_TO_MEM false //!< MEM <-> MEM interface.
#define ACCESS_CODEC false //!< Codec interface.
//! @}
/*! \name Specific Options for Access Control
*/
//! @{
#define GLOBAL_WR_PROTECT false //!< Management of a global write protection.
//! @}
#endif // _CONF_ACCESS_H_

14
ports/atmel-samd/boards/itsybitsy_m0/conf_board.h
View File

@ -1,14 +0,0 @@
/**
* \file
*
* \brief User board configuration template
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CONF_BOARD_H
#define CONF_BOARD_H
#endif // CONF_BOARD_H

1
ports/atmel-samd/boards/itsybitsy_m0/conf_clocks.h
View File

@ -1 +0,0 @@
#include "conf_clocks_crystalless.h"

221
ports/atmel-samd/boards/itsybitsy_m0/conf_usb.h
View File

@ -1,221 +0,0 @@
#include <stdbool.h>
#include <stdint.h>
#include "asf/common/services/usb/class/cdc/usb_protocol_cdc.h"
#ifndef CONF_USB_H_INCLUDED
#define CONF_USB_H_INCLUDED
#define USB_DEVICE_MAJOR_VERSION 1
#define USB_DEVICE_MINOR_VERSION 0
#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA)
#define USB_DEVICE_ATTR \
(USB_CONFIG_ATTR_BUS_POWERED)
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
//! USB Device string definitions (Optional)
#ifndef USB_DEVICE_MANUFACTURE_NAME
# define USB_DEVICE_MANUFACTURE_NAME "Adafruit Industries"
#endif
#ifndef USB_DEVICE_PRODUCT_NAME
# define USB_DEVICE_PRODUCT_NAME "ItsyBitsy M0"
#endif
// #define USB_DEVICE_SERIAL_NAME "12...EF"
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 32
extern char serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
//! Control endpoint size
#define USB_DEVICE_EP_CTRL_SIZE 64
//! Interfaces for this device (CDC COM + CDC DATA + MSC + HID mouse + HID kbd)
#define USB_DEVICE_NB_INTERFACE 5
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
// (4 | USB_EP_DIR_IN) // CDC TX
// (5 | USB_EP_DIR_OUT) // CDC RX
// (1 | USB_EP_DIR_IN) // MSC IN
// (2 | USB_EP_DIR_OUT) // MSC OUT
// (6 | USB_EP_DIR_IN) // HID mouse report
// (7 | USB_EP_DIR_IN) // HID keyboard report
#define USB_DEVICE_MAX_EP 7
#define UDI_CDC_PORT_NB 1
#define UDI_CDC_ENABLE_EXT(port) mp_cdc_enable(port)
extern bool mp_cdc_enable(uint8_t port);
#define UDI_CDC_DISABLE_EXT(port) mp_cdc_disable(port)
extern void mp_cdc_disable(uint8_t port);
#define UDI_CDC_LOW_RATE
#define UDI_CDC_DEFAULT_RATE 115200
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
#define UDI_CDC_DEFAULT_DATABITS 8
#define UDI_CDC_RX_NOTIFY(port) usb_rx_notify()
void usb_rx_notify(void);
#define UDI_CDC_SET_CODING_EXT(port,cfg) usb_coding_notify(port, cfg)
void usb_coding_notify(uint8_t port, usb_cdc_line_coding_t* coding);
#define UDI_CDC_SET_DTR_EXT(port,set) usb_dtr_notify(port, set)
void usb_dtr_notify(uint8_t port, bool set);
#define UDI_CDC_SET_RTS_EXT(port,set) usb_rts_notify(port, set)
void usb_rts_notify(uint8_t port, bool set);
/**
* USB CDC low level configuration
* In standalone these configurations are defined by the CDC module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
#define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT) // RX
//! Interface numbers
#define UDI_CDC_COMM_IFACE_NUMBER_0 0
#define UDI_CDC_DATA_IFACE_NUMBER_0 1
/**
* Configuration of MSC interface
* @{
*/
//! Vendor name and Product version of MSC interface
#define UDI_MSC_GLOBAL_VENDOR_ID \
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0'
//! Interface callback definition
#define UDI_MSC_ENABLE_EXT() mp_msc_enable()
extern bool mp_msc_enable(void);
#define UDI_MSC_DISABLE_EXT() mp_msc_disable()
extern void mp_msc_disable(void);
//! Enable id string of interface to add an extra USB string
#define UDI_MSC_STRING_ID 5
/**
* USB MSC low level configuration
* In standalone these configurations are defined by the MSC module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
//! Interface number
#define UDI_MSC_IFACE_NUMBER 2
/**
* Configuration of HID Mouse interface
* @{
*/
//! Interface callback definition
#define UDI_HID_MOUSE_ENABLE_EXT() mp_mouse_enable()
extern bool mp_mouse_enable(void);
#define UDI_HID_MOUSE_DISABLE_EXT() mp_mouse_disable()
extern void mp_mouse_disable(void);
//! Enable id string of interface to add an extra USB string
#define UDI_HID_MOUSE_STRING_ID 6
/**
* USB HID Mouse low level configuration
* In standalone these configurations are defined by the HID Mouse module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_HID_MOUSE_EP_IN (6 | USB_EP_DIR_IN)
//! Interface number
#define UDI_HID_MOUSE_IFACE_NUMBER 3
//@}
//@}
/**
* Configuration of HID Keyboard interface
* @{
*/
//! Interface callback definition
#define UDI_HID_KBD_ENABLE_EXT() mp_keyboard_enable()
extern bool mp_keyboard_enable(void);
#define UDI_HID_KBD_DISABLE_EXT() mp_keyboard_disable()
extern void mp_keyboard_disable(void);
#define UDI_HID_KBD_CHANGE_LED(value) mp_keyboard_led(value)
extern void mp_keyboard_led(uint8_t);
//! Enable id string of interface to add an extra USB string
#define UDI_HID_KBD_STRING_ID 7
/**
* USB HID Keyboard low level configuration
* In standalone these configurations are defined by the HID Keyboard module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_HID_KBD_EP_IN (7 | USB_EP_DIR_IN)
//! Interface number
#define UDI_HID_KBD_IFACE_NUMBER 4
/**
* Description of Composite Device
* @{
*/
//! USB Interfaces descriptor structure
#define UDI_COMPOSITE_DESC_T \
usb_iad_desc_t udi_cdc_iad; \
udi_cdc_comm_desc_t udi_cdc_comm; \
udi_cdc_data_desc_t udi_cdc_data; \
udi_msc_desc_t udi_msc; \
udi_hid_mouse_desc_t udi_hid_mouse; \
udi_hid_kbd_desc_t udi_hid_kbd
//! USB Interfaces descriptor value for Full Speed
#define UDI_COMPOSITE_DESC_FS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
.udi_msc = UDI_MSC_DESC_FS, \
.udi_hid_mouse = UDI_HID_MOUSE_DESC, \
.udi_hid_kbd = UDI_HID_KBD_DESC
//! USB Interfaces descriptor value for High Speed
#define UDI_COMPOSITE_DESC_HS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
.udi_msc = UDI_MSC_DESC_HS, \
.udi_hid_mouse = UDI_HID_MOUSE_DESC, \
.udi_hid_kbd = UDI_HID_KBD_DESC
//! USB Interface APIs
#define UDI_COMPOSITE_API \
&udi_api_cdc_comm, \
&udi_api_cdc_data, \
&udi_api_msc, \
&udi_api_hid_mouse, \
&udi_api_hid_kbd
//@}
/**
* USB Device Driver Configuration
* @{
*/
//@}
//! The includes of classes and other headers must be done at the end of this file to avoid compile error
#include "udi_cdc.h"
#include "udi_msc.h"
#include "udi_hid_mouse.h"
#include "udi_hid_kbd.h"
#endif

40
ports/atmel-samd/boards/itsybitsy_m0/mpconfigboard.h
View File

@ -1,5 +1,3 @@
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Adafruit ItsyBitsy M0" #define MICROPY_HW_BOARD_NAME "Adafruit ItsyBitsy M0"
#define MICROPY_HW_MCU_NAME "samd21g18" #define MICROPY_HW_MCU_NAME "samd21g18"
@ -7,28 +5,40 @@
#define MICROPY_HW_APA102_MOSI (&pin_PA01) #define MICROPY_HW_APA102_MOSI (&pin_PA01)
#define MICROPY_HW_APA102_SCK (&pin_PA00) #define MICROPY_HW_APA102_SCK (&pin_PA00)
#define MICROPY_PORT_A (PORT_PA00 | PORT_PA01 | PORT_PA27 | PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_B (PORT_PB22 | PORT_PB23 | PORT_PB03 )
// Salae reads 12mhz which is the limit even though we set it to the safer 8mhz. // Salae reads 12mhz which is the limit even though we set it to the safer 8mhz.
#define SPI_FLASH_BAUDRATE (8000000) #define SPI_FLASH_BAUDRATE (8000000)
#define SPI_FLASH_MUX_SETTING SPI_SIGNAL_MUX_SETTING_F #define SPI_FLASH_MOSI_PIN PIN_PB22
#define SPI_FLASH_PAD2_PINMUX PINMUX_PB22D_SERCOM5_PAD2 // MOSI #define SPI_FLASH_MISO_PIN PIN_PB03
// Use default pinmux for the chip select since we manage it ourselves. #define SPI_FLASH_SCK_PIN PIN_PB23
#define SPI_FLASH_PAD3_PINMUX PINMUX_PB23D_SERCOM5_PAD3 // SCK #define SPI_FLASH_CS_PIN PIN_PA27
#define SPI_FLASH_PAD1_PINMUX PINMUX_PB03D_SERCOM5_PAD1 // MISO #define SPI_FLASH_MOSI_PIN_FUNCTION PINMUX_PB22D_SERCOM5_PAD2
#define SPI_FLASH_PAD0_PINMUX PINMUX_UNUSED // #define SPI_FLASH_MISO_PIN_FUNCTION PINMUX_PB03D_SERCOM5_PAD1
#define SPI_FLASH_SERCOM SERCOM5 #define SPI_FLASH_SCK_PIN_FUNCTION PINMUX_PB23D_SERCOM5_PAD3
#define SPI_FLASH_SERCOM SERCOM5
#define SPI_FLASH_CS PIN_PA27 #define SPI_FLASH_SERCOM_INDEX 5
#define SPI_FLASH_MOSI_PAD 2
#define SPI_FLASH_MISO_PAD 1
#define SPI_FLASH_SCK_PAD 3
// <o> Transmit Data Pinout
// <0x0=>PAD[0,1]_DO_SCK
// <0x1=>PAD[2,3]_DO_SCK
// <0x2=>PAD[3,1]_DO_SCK
// <0x3=>PAD[0,3]_DO_SCK
#define SPI_FLASH_DOPO 1
#define SPI_FLASH_DIPO 1 // same as MISO pad
// These are pins not to reset.
#define MICROPY_PORT_A (PORT_PA00 | PORT_PA01 | PORT_PA27 | PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_B (PORT_PB22 | PORT_PB23 | PORT_PB03 )
#define MICROPY_PORT_C (0)
#include "spi_flash.h" #include "spi_flash.h"
// If you change this, then make sure to update the linker scripts as well to // If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code. // make sure you don't overwrite code.
#define CIRCUITPY_INTERNAL_NVM_SIZE 256 // #define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define CIRCUITPY_INTERNAL_NVM_SIZE 0
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE) #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
//#include "flash_S25FL216K.h" //#include "flash_S25FL216K.h"

2
ports/atmel-samd/boards/trinket_m0/mpconfigboard.h
View File

@ -1,5 +1,3 @@
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Adafruit Trinket M0" #define MICROPY_HW_BOARD_NAME "Adafruit Trinket M0"
#define MICROPY_HW_MCU_NAME "samd21e18" #define MICROPY_HW_MCU_NAME "samd21e18"

115
ports/atmel-samd/boards/trinket_m0_haxpress/conf_access.h
View File

@ -1,115 +0,0 @@
/**
* \file
*
* \brief Memory access control configuration file.
*
* Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_ACCESS_H_
#define _CONF_ACCESS_H_
#include "compiler.h"
#include "board.h"
/*! \name Activation of Logical Unit Numbers
*/
//! @{
#define LUN_0 ENABLE //!< On-Chip Virtual Memory.
#define LUN_1 DISABLE //!< AT45DBX Data Flash.
#define LUN_2 DISABLE //!< SD/MMC Card over SPI.
#define LUN_3 DISABLE //!< SD/MMC Card over MCI Slot 0.
#define LUN_4 DISABLE
#define LUN_5 DISABLE
#define LUN_6 DISABLE
#define LUN_7 DISABLE
#define LUN_USB DISABLE //!< Host Mass-Storage Memory.
//! @}
/*! \name LUN 0 Definitions
*/
//! @{
#define LUN_0_INCLUDE "access_vfs.h"
#define Lun_0_test_unit_ready vfs_test_unit_ready
#define Lun_0_read_capacity vfs_read_capacity
#define Lun_0_unload NULL
#define Lun_0_wr_protect vfs_wr_protect
#define Lun_0_removal vfs_removal
#define Lun_0_usb_read_10 vfs_usb_read_10
#define Lun_0_usb_write_10 vfs_usb_write_10
#define LUN_0_NAME "\"CircuitPython VFS[0]\""
//! @}
#define MEM_USB LUN_USB
/*! \name Actions Associated with Memory Accesses
*
* Write here the action to associate with each memory access.
*
* \warning Be careful not to waste time in order not to disturb the functions.
*/
//! @{
#define memory_start_read_action(nb_sectors)
#define memory_stop_read_action()
#define memory_start_write_action(nb_sectors)
#define memory_stop_write_action()
//! @}
/*! \name Activation of Interface Features
*/
//! @{
#define ACCESS_USB true //!< MEM <-> USB interface.
#define ACCESS_MEM_TO_RAM false //!< MEM <-> RAM interface.
#define ACCESS_STREAM false //!< Streaming MEM <-> MEM interface.
#define ACCESS_STREAM_RECORD false //!< Streaming MEM <-> MEM interface in record mode.
#define ACCESS_MEM_TO_MEM false //!< MEM <-> MEM interface.
#define ACCESS_CODEC false //!< Codec interface.
//! @}
/*! \name Specific Options for Access Control
*/
//! @{
#define GLOBAL_WR_PROTECT false //!< Management of a global write protection.
//! @}
#endif // _CONF_ACCESS_H_

14
ports/atmel-samd/boards/trinket_m0_haxpress/conf_board.h
View File

@ -1,14 +0,0 @@
/**
* \file
*
* \brief User board configuration template
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CONF_BOARD_H
#define CONF_BOARD_H
#endif // CONF_BOARD_H

1
ports/atmel-samd/boards/trinket_m0_haxpress/conf_clocks.h
View File

@ -1 +0,0 @@
#include "conf_clocks_crystalless.h"

221
ports/atmel-samd/boards/trinket_m0_haxpress/conf_usb.h
View File

@ -1,221 +0,0 @@
#include <stdbool.h>
#include <stdint.h>
#include "asf/common/services/usb/class/cdc/usb_protocol_cdc.h"
#ifndef CONF_USB_H_INCLUDED
#define CONF_USB_H_INCLUDED
#define USB_DEVICE_MAJOR_VERSION 1
#define USB_DEVICE_MINOR_VERSION 0
#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA)
#define USB_DEVICE_ATTR \
(USB_CONFIG_ATTR_BUS_POWERED)
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
//! USB Device string definitions (Optional)
#ifndef USB_DEVICE_MANUFACTURE_NAME
# define USB_DEVICE_MANUFACTURE_NAME "Radomir Dopieralski"
#endif
#ifndef USB_DEVICE_PRODUCT_NAME
# define USB_DEVICE_PRODUCT_NAME "Trinket M0 Haxpress"
#endif
// #define USB_DEVICE_SERIAL_NAME "12...EF"
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 32
extern char serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
//! Control endpoint size
#define USB_DEVICE_EP_CTRL_SIZE 64
//! Interfaces for this device (CDC COM + CDC DATA + MSC + HID mouse + HID kbd)
#define USB_DEVICE_NB_INTERFACE 5
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
// (4 | USB_EP_DIR_IN) // CDC TX
// (5 | USB_EP_DIR_OUT) // CDC RX
// (1 | USB_EP_DIR_IN) // MSC IN
// (2 | USB_EP_DIR_OUT) // MSC OUT
// (6 | USB_EP_DIR_IN) // HID mouse report
// (7 | USB_EP_DIR_IN) // HID keyboard report
#define USB_DEVICE_MAX_EP 7
#define UDI_CDC_PORT_NB 1
#define UDI_CDC_ENABLE_EXT(port) mp_cdc_enable(port)
extern bool mp_cdc_enable(uint8_t port);
#define UDI_CDC_DISABLE_EXT(port) mp_cdc_disable(port)
extern void mp_cdc_disable(uint8_t port);
#define UDI_CDC_LOW_RATE
#define UDI_CDC_DEFAULT_RATE 115200
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
#define UDI_CDC_DEFAULT_DATABITS 8
#define UDI_CDC_RX_NOTIFY(port) usb_rx_notify()
void usb_rx_notify(void);
#define UDI_CDC_SET_CODING_EXT(port,cfg) usb_coding_notify(port, cfg)
void usb_coding_notify(uint8_t port, usb_cdc_line_coding_t* coding);
#define UDI_CDC_SET_DTR_EXT(port,set) usb_dtr_notify(port, set)
void usb_dtr_notify(uint8_t port, bool set);
#define UDI_CDC_SET_RTS_EXT(port,set) usb_rts_notify(port, set)
void usb_rts_notify(uint8_t port, bool set);
/**
* USB CDC low level configuration
* In standalone these configurations are defined by the CDC module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
#define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT) // RX
//! Interface numbers
#define UDI_CDC_COMM_IFACE_NUMBER_0 0
#define UDI_CDC_DATA_IFACE_NUMBER_0 1
/**
* Configuration of MSC interface
* @{
*/
//! Vendor name and Product version of MSC interface
#define UDI_MSC_GLOBAL_VENDOR_ID \
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0'
//! Interface callback definition
#define UDI_MSC_ENABLE_EXT() mp_msc_enable()
extern bool mp_msc_enable(void);
#define UDI_MSC_DISABLE_EXT() mp_msc_disable()
extern void mp_msc_disable(void);
//! Enable id string of interface to add an extra USB string
#define UDI_MSC_STRING_ID 5
/**
* USB MSC low level configuration
* In standalone these configurations are defined by the MSC module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
//! Interface number
#define UDI_MSC_IFACE_NUMBER 2
/**
* Configuration of HID Mouse interface
* @{
*/
//! Interface callback definition
#define UDI_HID_MOUSE_ENABLE_EXT() mp_mouse_enable()
extern bool mp_mouse_enable(void);
#define UDI_HID_MOUSE_DISABLE_EXT() mp_mouse_disable()
extern void mp_mouse_disable(void);
//! Enable id string of interface to add an extra USB string
#define UDI_HID_MOUSE_STRING_ID 6
/**
* USB HID Mouse low level configuration
* In standalone these configurations are defined by the HID Mouse module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_HID_MOUSE_EP_IN (6 | USB_EP_DIR_IN)
//! Interface number
#define UDI_HID_MOUSE_IFACE_NUMBER 3
//@}
//@}
/**
* Configuration of HID Keyboard interface
* @{
*/
//! Interface callback definition
#define UDI_HID_KBD_ENABLE_EXT() mp_keyboard_enable()
extern bool mp_keyboard_enable(void);
#define UDI_HID_KBD_DISABLE_EXT() mp_keyboard_disable()
extern void mp_keyboard_disable(void);
#define UDI_HID_KBD_CHANGE_LED(value) mp_keyboard_led(value)
extern void mp_keyboard_led(uint8_t);
//! Enable id string of interface to add an extra USB string
#define UDI_HID_KBD_STRING_ID 7
/**
* USB HID Keyboard low level configuration
* In standalone these configurations are defined by the HID Keyboard module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_HID_KBD_EP_IN (7 | USB_EP_DIR_IN)
//! Interface number
#define UDI_HID_KBD_IFACE_NUMBER 4
/**
* Description of Composite Device
* @{
*/
//! USB Interfaces descriptor structure
#define UDI_COMPOSITE_DESC_T \
usb_iad_desc_t udi_cdc_iad; \
udi_cdc_comm_desc_t udi_cdc_comm; \
udi_cdc_data_desc_t udi_cdc_data; \
udi_msc_desc_t udi_msc; \
udi_hid_mouse_desc_t udi_hid_mouse; \
udi_hid_kbd_desc_t udi_hid_kbd
//! USB Interfaces descriptor value for Full Speed
#define UDI_COMPOSITE_DESC_FS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
.udi_msc = UDI_MSC_DESC_FS, \
.udi_hid_mouse = UDI_HID_MOUSE_DESC, \
.udi_hid_kbd = UDI_HID_KBD_DESC
//! USB Interfaces descriptor value for High Speed
#define UDI_COMPOSITE_DESC_HS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
.udi_msc = UDI_MSC_DESC_HS, \
.udi_hid_mouse = UDI_HID_MOUSE_DESC, \
.udi_hid_kbd = UDI_HID_KBD_DESC
//! USB Interface APIs
#define UDI_COMPOSITE_API \
&udi_api_cdc_comm, \
&udi_api_cdc_data, \
&udi_api_msc, \
&udi_api_hid_mouse, \
&udi_api_hid_kbd
//@}
/**
* USB Device Driver Configuration
* @{
*/
//@}
//! The includes of classes and other headers must be done at the end of this file to avoid compile error
#include "udi_cdc.h"
#include "udi_msc.h"
#include "udi_hid_mouse.h"
#include "udi_hid_kbd.h"
#endif

39
ports/atmel-samd/boards/trinket_m0_haxpress/mpconfigboard.h
View File

@ -1,27 +1,37 @@
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "Trinket M0 Haxpress" #define MICROPY_HW_BOARD_NAME "Trinket M0 Haxpress"
#define MICROPY_HW_MCU_NAME "samd21e18" #define MICROPY_HW_MCU_NAME "samd21e18"
// Rev B - Black // Rev B - Black
#define MICROPY_HW_APA102_MOSI (&pin_PA00) // #define MICROPY_HW_APA102_MOSI (&pin_PA00)
#define MICROPY_HW_APA102_SCK (&pin_PA01) // #define MICROPY_HW_APA102_SCK (&pin_PA01)
// Salae reads 12mhz which is the limit even though we set it to the // Salae reads 12mhz which is the limit even though we set it to the
// safer 8mhz. // safer 8mhz.
#define SPI_FLASH_BAUDRATE (8000000) #define SPI_FLASH_BAUDRATE (8000000)
#define SPI_FLASH_MUX_SETTING SPI_SIGNAL_MUX_SETTING_D #define SPI_FLASH_MOSI_PIN PIN_PA16
#define SPI_FLASH_PAD0_PINMUX PINMUX_PA16D_SERCOM3_PAD0 // MOSI #define SPI_FLASH_MISO_PIN PIN_PA19
#define SPI_FLASH_PAD1_PINMUX PINMUX_PA17D_SERCOM3_PAD1 // SCK #define SPI_FLASH_SCK_PIN PIN_PA17
#define SPI_FLASH_PAD2_PINMUX PINMUX_UNUSED // Use default pinmux for the chip #define SPI_FLASH_CS_PIN PIN_PA11
// select since we manage it #define SPI_FLASH_MOSI_PIN_FUNCTION PINMUX_PA16D_SERCOM3_PAD0
// ourselves. #define SPI_FLASH_MISO_PIN_FUNCTION PINMUX_PA19D_SERCOM3_PAD3
#define SPI_FLASH_PAD3_PINMUX PINMUX_PA19D_SERCOM3_PAD3 // MISO #define SPI_FLASH_SCK_PIN_FUNCTION PINMUX_PA17D_SERCOM3_PAD1
#define SPI_FLASH_SERCOM SERCOM3 #define SPI_FLASH_SERCOM SERCOM3
#define SPI_FLASH_SERCOM_INDEX 3
#define SPI_FLASH_MOSI_PAD 0
#define SPI_FLASH_MISO_PAD 3
#define SPI_FLASH_SCK_PAD 1
// <o> Transmit Data Pinout
// <0x0=>PAD[0,1]_DO_SCK
// <0x1=>PAD[2,3]_DO_SCK
// <0x2=>PAD[3,1]_DO_SCK
// <0x3=>PAD[0,3]_DO_SCK
#define SPI_FLASH_DOPO 0
#define SPI_FLASH_DIPO 3 // same as MISO pad
#define SPI_FLASH_CS PIN_PA11 #define SPI_FLASH_CS PIN_PA11
// These are pins not to reset.
#define MICROPY_PORT_A (PORT_PA00 | PORT_PA01 | PORT_PA11 | PORT_PA16 |\ #define MICROPY_PORT_A (PORT_PA00 | PORT_PA01 | PORT_PA11 | PORT_PA16 |\
PORT_PA17 | PORT_PA18 | PORT_PA19 | PORT_PA24 |\ PORT_PA17 | PORT_PA18 | PORT_PA19 | PORT_PA24 |\
PORT_PA25) PORT_PA25)
@ -32,7 +42,10 @@
#include "spi_flash.h" #include "spi_flash.h"
#define CIRCUITPY_INTERNAL_NVM_SIZE 256 // If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code.
//#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define CIRCUITPY_INTERNAL_NVM_SIZE 0
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE) #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#include "flash_W25Q32BV.h" #include "flash_W25Q32BV.h"

115
ports/atmel-samd/boards/ugame/conf_access.h
View File

@ -1,115 +0,0 @@
/**
* \file
*
* \brief Memory access control configuration file.
*
* Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* \page License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an
* Atmel microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef _CONF_ACCESS_H_
#define _CONF_ACCESS_H_
#include "compiler.h"
#include "board.h"
/*! \name Activation of Logical Unit Numbers
*/
//! @{
#define LUN_0 ENABLE //!< On-Chip Virtual Memory.
#define LUN_1 DISABLE //!< AT45DBX Data Flash.
#define LUN_2 DISABLE //!< SD/MMC Card over SPI.
#define LUN_3 DISABLE //!< SD/MMC Card over MCI Slot 0.
#define LUN_4 DISABLE
#define LUN_5 DISABLE
#define LUN_6 DISABLE
#define LUN_7 DISABLE
#define LUN_USB DISABLE //!< Host Mass-Storage Memory.
//! @}
/*! \name LUN 0 Definitions
*/
//! @{
#define LUN_0_INCLUDE "access_vfs.h"
#define Lun_0_test_unit_ready vfs_test_unit_ready
#define Lun_0_read_capacity vfs_read_capacity
#define Lun_0_unload NULL
#define Lun_0_wr_protect vfs_wr_protect
#define Lun_0_removal vfs_removal
#define Lun_0_usb_read_10 vfs_usb_read_10
#define Lun_0_usb_write_10 vfs_usb_write_10
#define LUN_0_NAME "\"CircuitPython VFS[0]\""
//! @}
#define MEM_USB LUN_USB
/*! \name Actions Associated with Memory Accesses
*
* Write here the action to associate with each memory access.
*
* \warning Be careful not to waste time in order not to disturb the functions.
*/
//! @{
#define memory_start_read_action(nb_sectors)
#define memory_stop_read_action()
#define memory_start_write_action(nb_sectors)
#define memory_stop_write_action()
//! @}
/*! \name Activation of Interface Features
*/
//! @{
#define ACCESS_USB true //!< MEM <-> USB interface.
#define ACCESS_MEM_TO_RAM false //!< MEM <-> RAM interface.
#define ACCESS_STREAM false //!< Streaming MEM <-> MEM interface.
#define ACCESS_STREAM_RECORD false //!< Streaming MEM <-> MEM interface in record mode.
#define ACCESS_MEM_TO_MEM false //!< MEM <-> MEM interface.
#define ACCESS_CODEC false //!< Codec interface.
//! @}
/*! \name Specific Options for Access Control
*/
//! @{
#define GLOBAL_WR_PROTECT false //!< Management of a global write protection.
//! @}
#endif // _CONF_ACCESS_H_

14
ports/atmel-samd/boards/ugame/conf_board.h
View File

@ -1,14 +0,0 @@
/**
* \file
*
* \brief User board configuration template
*
*/
/*
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
*/
#ifndef CONF_BOARD_H
#define CONF_BOARD_H
#endif // CONF_BOARD_H

1
ports/atmel-samd/boards/ugame/conf_clocks.h
View File

@ -1 +0,0 @@
#include "conf_clocks_crystalless.h"

221
ports/atmel-samd/boards/ugame/conf_usb.h
View File

@ -1,221 +0,0 @@
#include <stdbool.h>
#include <stdint.h>
#include "asf/common/services/usb/class/cdc/usb_protocol_cdc.h"
#ifndef CONF_USB_H_INCLUDED
#define CONF_USB_H_INCLUDED
#define USB_DEVICE_MAJOR_VERSION 1
#define USB_DEVICE_MINOR_VERSION 0
#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA)
#define USB_DEVICE_ATTR \
(USB_CONFIG_ATTR_BUS_POWERED)
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
//! USB Device string definitions (Optional)
#ifndef USB_DEVICE_MANUFACTURE_NAME
# define USB_DEVICE_MANUFACTURE_NAME "Radomir Dopieralski"
#endif
#ifndef USB_DEVICE_PRODUCT_NAME
# define USB_DEVICE_PRODUCT_NAME "uGame"
#endif
// #define USB_DEVICE_SERIAL_NAME "12...EF"
#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number
#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 32
extern char serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
//! Control endpoint size
#define USB_DEVICE_EP_CTRL_SIZE 64
//! Interfaces for this device (CDC COM + CDC DATA + MSC + HID mouse + HID kbd)
#define USB_DEVICE_NB_INTERFACE 5
// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
// (4 | USB_EP_DIR_IN) // CDC TX
// (5 | USB_EP_DIR_OUT) // CDC RX
// (1 | USB_EP_DIR_IN) // MSC IN
// (2 | USB_EP_DIR_OUT) // MSC OUT
// (6 | USB_EP_DIR_IN) // HID mouse report
// (7 | USB_EP_DIR_IN) // HID keyboard report
#define USB_DEVICE_MAX_EP 7
#define UDI_CDC_PORT_NB 1
#define UDI_CDC_ENABLE_EXT(port) mp_cdc_enable(port)
extern bool mp_cdc_enable(uint8_t port);
#define UDI_CDC_DISABLE_EXT(port) mp_cdc_disable(port)
extern void mp_cdc_disable(uint8_t port);
#define UDI_CDC_LOW_RATE
#define UDI_CDC_DEFAULT_RATE 115200
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
#define UDI_CDC_DEFAULT_DATABITS 8
#define UDI_CDC_RX_NOTIFY(port) usb_rx_notify()
void usb_rx_notify(void);
#define UDI_CDC_SET_CODING_EXT(port,cfg) usb_coding_notify(port, cfg)
void usb_coding_notify(uint8_t port, usb_cdc_line_coding_t* coding);
#define UDI_CDC_SET_DTR_EXT(port,set) usb_dtr_notify(port, set)
void usb_dtr_notify(uint8_t port, bool set);
#define UDI_CDC_SET_RTS_EXT(port,set) usb_rts_notify(port, set)
void usb_rts_notify(uint8_t port, bool set);
/**
* USB CDC low level configuration
* In standalone these configurations are defined by the CDC module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
#define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
#define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT) // RX
//! Interface numbers
#define UDI_CDC_COMM_IFACE_NUMBER_0 0
#define UDI_CDC_DATA_IFACE_NUMBER_0 1
/**
* Configuration of MSC interface
* @{
*/
//! Vendor name and Product version of MSC interface
#define UDI_MSC_GLOBAL_VENDOR_ID \
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
'1', '.', '0', '0'
//! Interface callback definition
#define UDI_MSC_ENABLE_EXT() mp_msc_enable()
extern bool mp_msc_enable(void);
#define UDI_MSC_DISABLE_EXT() mp_msc_disable()
extern void mp_msc_disable(void);
//! Enable id string of interface to add an extra USB string
#define UDI_MSC_STRING_ID 5
/**
* USB MSC low level configuration
* In standalone these configurations are defined by the MSC module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
//! Interface number
#define UDI_MSC_IFACE_NUMBER 2
/**
* Configuration of HID Mouse interface
* @{
*/
//! Interface callback definition
#define UDI_HID_MOUSE_ENABLE_EXT() mp_mouse_enable()
extern bool mp_mouse_enable(void);
#define UDI_HID_MOUSE_DISABLE_EXT() mp_mouse_disable()
extern void mp_mouse_disable(void);
//! Enable id string of interface to add an extra USB string
#define UDI_HID_MOUSE_STRING_ID 6
/**
* USB HID Mouse low level configuration
* In standalone these configurations are defined by the HID Mouse module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_HID_MOUSE_EP_IN (6 | USB_EP_DIR_IN)
//! Interface number
#define UDI_HID_MOUSE_IFACE_NUMBER 3
//@}
//@}
/**
* Configuration of HID Keyboard interface
* @{
*/
//! Interface callback definition
#define UDI_HID_KBD_ENABLE_EXT() mp_keyboard_enable()
extern bool mp_keyboard_enable(void);
#define UDI_HID_KBD_DISABLE_EXT() mp_keyboard_disable()
extern void mp_keyboard_disable(void);
#define UDI_HID_KBD_CHANGE_LED(value) mp_keyboard_led(value)
extern void mp_keyboard_led(uint8_t);
//! Enable id string of interface to add an extra USB string
#define UDI_HID_KBD_STRING_ID 7
/**
* USB HID Keyboard low level configuration
* In standalone these configurations are defined by the HID Keyboard module.
* For composite device, these configuration must be defined here
* @{
*/
//! Endpoint numbers definition
#define UDI_HID_KBD_EP_IN (7 | USB_EP_DIR_IN)
//! Interface number
#define UDI_HID_KBD_IFACE_NUMBER 4
/**
* Description of Composite Device
* @{
*/
//! USB Interfaces descriptor structure
#define UDI_COMPOSITE_DESC_T \
usb_iad_desc_t udi_cdc_iad; \
udi_cdc_comm_desc_t udi_cdc_comm; \
udi_cdc_data_desc_t udi_cdc_data; \
udi_msc_desc_t udi_msc; \
udi_hid_mouse_desc_t udi_hid_mouse; \
udi_hid_kbd_desc_t udi_hid_kbd
//! USB Interfaces descriptor value for Full Speed
#define UDI_COMPOSITE_DESC_FS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
.udi_msc = UDI_MSC_DESC_FS, \
.udi_hid_mouse = UDI_HID_MOUSE_DESC, \
.udi_hid_kbd = UDI_HID_KBD_DESC
//! USB Interfaces descriptor value for High Speed
#define UDI_COMPOSITE_DESC_HS \
.udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
.udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
.udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
.udi_msc = UDI_MSC_DESC_HS, \
.udi_hid_mouse = UDI_HID_MOUSE_DESC, \
.udi_hid_kbd = UDI_HID_KBD_DESC
//! USB Interface APIs
#define UDI_COMPOSITE_API \
&udi_api_cdc_comm, \
&udi_api_cdc_data, \
&udi_api_msc, \
&udi_api_hid_mouse, \
&udi_api_hid_kbd
//@}
/**
* USB Device Driver Configuration
* @{
*/
//@}
//! The includes of classes and other headers must be done at the end of this file to avoid compile error
#include "udi_cdc.h"
#include "udi_msc.h"
#include "udi_hid_mouse.h"
#include "udi_hid_kbd.h"
#endif

52
ports/atmel-samd/boards/ugame/mpconfigboard.h
View File

@ -1,48 +1,46 @@
#define USB_REPL
#define MICROPY_HW_BOARD_NAME "uGame" #define MICROPY_HW_BOARD_NAME "uGame"
#define MICROPY_HW_MCU_NAME "samd21e18" #define MICROPY_HW_MCU_NAME "samd21e18"
#if 1
// Salae reads 12mhz which is the limit even though we set it to the // Salae reads 12mhz which is the limit even though we set it to the
// safer 8mhz. // safer 8mhz.
#define SPI_FLASH_BAUDRATE (8000000) #define SPI_FLASH_BAUDRATE (8000000)
#define SPI_FLASH_MUX_SETTING SPI_SIGNAL_MUX_SETTING_D #define SPI_FLASH_MOSI_PIN PIN_PA16
#define SPI_FLASH_PAD0_PINMUX PINMUX_PA16D_SERCOM3_PAD0 // MOSI #define SPI_FLASH_MISO_PIN PIN_PA19
#define SPI_FLASH_PAD1_PINMUX PINMUX_PA17D_SERCOM3_PAD1 // SCK #define SPI_FLASH_SCK_PIN PIN_PA17
#define SPI_FLASH_PAD2_PINMUX PINMUX_UNUSED // Use default pinmux for the chip #define SPI_FLASH_CS_PIN PIN_PA11
// select since we manage it #define SPI_FLASH_MOSI_PIN_FUNCTION PINMUX_PA16D_SERCOM3_PAD0
// ourselves. #define SPI_FLASH_MISO_PIN_FUNCTION PINMUX_PA19D_SERCOM3_PAD3
#define SPI_FLASH_PAD3_PINMUX PINMUX_PA19D_SERCOM3_PAD3 // MISO #define SPI_FLASH_SCK_PIN_FUNCTION PINMUX_PA17D_SERCOM3_PAD1
#define SPI_FLASH_SERCOM SERCOM3 #define SPI_FLASH_SERCOM SERCOM3
#define SPI_FLASH_SERCOM_INDEX 3
#define SPI_FLASH_CS PIN_PA11 #define SPI_FLASH_MOSI_PAD 0
#define SPI_FLASH_MISO_PAD 3
#define SPI_FLASH_SCK_PAD 1
// <o> Transmit Data Pinout
// <0x0=>PAD[0,1]_DO_SCK
// <0x1=>PAD[2,3]_DO_SCK
// <0x2=>PAD[3,1]_DO_SCK
// <0x3=>PAD[0,3]_DO_SCK
#define SPI_FLASH_DOPO 0
#define SPI_FLASH_DIPO 3 // same as MISO pad
// These are pins not to reset.
#define MICROPY_PORT_A (PORT_PA11 | PORT_PA16 |\ #define MICROPY_PORT_A (PORT_PA11 | PORT_PA16 |\
PORT_PA17 | PORT_PA18 | PORT_PA19 | PORT_PA24 |\ PORT_PA17 | PORT_PA18 | PORT_PA19 | PORT_PA24 |\
PORT_PA25) PORT_PA25)
#define MICROPY_PORT_B (0) #define MICROPY_PORT_B (0)
#define MICROPY_PORT_C (0)
#define CALIBRATE_CRYSTALLESS 1 #define CALIBRATE_CRYSTALLESS 1
#include "spi_flash.h" #include "spi_flash.h"
#define CIRCUITPY_INTERNAL_NVM_SIZE 256 // If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code.
//#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define CIRCUITPY_INTERNAL_NVM_SIZE 0
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE) #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
//#include "flash_W25Q32BV.h" //#include "flash_W25Q32BV.h"
#include "flash_S25FL216K.h" #include "flash_S25FL216K.h"
#else
#define MICROPY_PORT_A (PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_B (0)
#include "internal_flash.h"
#define CIRCUITPY_INTERNAL_NVM_SIZE 0
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000)
#endif

2
ports/atmel-samd/boards/ugame/mpconfigboard.mk
View File

@ -2,7 +2,7 @@ LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
#LD_FILE = boards/samd21x18-bootloader.ld #LD_FILE = boards/samd21x18-bootloader.ld
USB_VID = 0x239A USB_VID = 0x239A
USB_PID = 0x801F USB_PID = 0x801F
USB_PRODUCT = "UGame" USB_PRODUCT = "uGame"
USB_MANUFACTURER = "Radomir Dopieralski" USB_MANUFACTURER = "Radomir Dopieralski"
SPI_FLASH_FILESYSTEM = 1 SPI_FLASH_FILESYSTEM = 1