Merge branch 'adafruit:main' into main

locale/ID.po

@@ -106,6 +106,7 @@ msgstr "%q berisi pin duplikat"
 msgid "%q failure: %d"
 msgstr "%q gagal: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -186,7 +187,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -399,6 +399,10 @@ msgstr "ADC2 sedang digunakan oleh WiFi"
 msgid "Address must be %d bytes long"
 msgstr "Alamat harus sepanjang %d byte"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr ""
@@ -479,7 +483,7 @@ msgstr "Sudah disebarkan."
 msgid "Already have all-matches listener"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -503,7 +507,7 @@ msgstr "Send yang lain sudah aktif"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array harus mengandung halfwords (ketik 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Nilai array harus berupa byte tunggal."
@@ -927,10 +931,10 @@ msgstr "Error pada regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Diharapkan %q"
@@ -1033,7 +1037,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1648,11 +1651,14 @@ msgstr ""
 "Hanya monokrom, 4bpp atau 8bpp yang diindeks, dan 16bpp atau lebih yang "
 "didukung: %d bpp diberikan"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1773,6 +1779,10 @@ msgstr ""
 "ideal. Jika ini tidak dapat dihindari, berikan allow_inefficient=True ke "
 "konstruktor"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "Pin harus berurutan"
@@ -1819,6 +1829,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull tidak digunakan saat arah output."
@@ -1965,7 +1979,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Potongan dan nilai panjangnya berbeda."
@@ -2239,8 +2253,8 @@ msgstr "Tidak dapat membaca data palet warna"
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2498,7 +2512,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "diperlukan array/byte di sisi kanan"
 
@@ -3757,7 +3771,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""

locale/cs.po

@@ -107,6 +107,7 @@ msgstr "%q obsahuje duplicitní piny"
 msgid "%q failure: %d"
 msgstr "%q: selhání %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -187,7 +188,6 @@ msgstr "%q je mimo hranice"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -400,6 +400,10 @@ msgstr "WiFi používá ADC2"
 msgid "Address must be %d bytes long"
 msgstr "Adresa musí být %d bajtů dlouhá"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Všechny CAN periferie jsou používány"
@@ -480,7 +484,7 @@ msgstr "Již propagujeme."
 msgid "Already have all-matches listener"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -504,7 +508,7 @@ msgstr "Další odesílání je již aktivní"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Pole musí obsahovat poloviční slova (typ „H“)"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Hodnoty pole by měly být jednoduché bajty."
@@ -925,10 +929,10 @@ msgstr "Chyba v regulárním výrazu"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Očekává se %q"
@@ -1031,7 +1035,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1644,11 +1647,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1764,6 +1770,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1810,6 +1820,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -1954,7 +1968,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@@ -2228,8 +2242,8 @@ msgstr ""
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2485,7 +2499,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
@@ -3743,7 +3757,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""

locale/de_DE.po

@@ -108,6 +108,7 @@ msgstr "%q enthält doppelte Pins"
 msgid "%q failure: %d"
 msgstr "%q Fehler: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -189,7 +190,6 @@ msgstr "%q außerhalb der Grenzen"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -403,6 +403,10 @@ msgstr "ADC2 wird vom WiFi benutzt"
 msgid "Address must be %d bytes long"
 msgstr "Die Adresse muss %d Bytes lang sein"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Alle CAN-Schnittstellen sind in Benutzung"
@@ -483,7 +487,7 @@ msgstr "Bereits am Anbieten (advertising)."
 msgid "Already have all-matches listener"
 msgstr "All-Matchers-Listener bereits vorhanden"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -507,7 +511,7 @@ msgstr "Ein anderer Sendevorgang ist schon aktiv"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array muss Halbwörter enthalten (type 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Array-Werte sollten aus Einzelbytes bestehen."
@@ -933,10 +937,10 @@ msgstr "Fehler in regex"
 msgid "Error: Failure to bind"
 msgstr "Error: Bind Fehler"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Erwartet ein(e) %q"
@@ -1040,7 +1044,6 @@ msgstr "Die Firmware ist doppelt vorhanden"
 msgid "Firmware is invalid"
 msgstr "Die Firmware ist ungültig"
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr "Die Firmware ist zu groß"
@@ -1665,11 +1668,14 @@ msgstr ""
 "Nur monochrome, indizierte 4bpp oder 8bpp, und 16bpp oder größere BMPs "
 "unterstützt: %d bpp wurden gegeben"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr "Nur ein %q kann im Deep-Sleep gesetzt werden."
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1788,6 +1794,10 @@ msgstr ""
 "Bytes verbraucht. Wenn dies nicht vermieden werden kann, übergib "
 "allow_inefficient=True an den Konstruktor"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "Pins müssen geordnet sein"
@@ -1835,6 +1845,10 @@ msgstr "Programm macht OUT ohne Laden von OSR"
 msgid "Program size invalid"
 msgstr "Programm-Größe ist ungültig"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull wird nicht verwendet, wenn die Richtung output ist."
@@ -1979,7 +1993,7 @@ msgstr "Größe nicht unterstützt"
 msgid "Sleep Memory not available"
 msgstr "Sleep-Speicher nicht verfügbar"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice und Wert (value) haben unterschiedliche Längen."
@@ -2267,9 +2281,9 @@ msgstr "Konnte Farbpalettendaten nicht lesen"
 msgid "Unable to start mDNS query"
 msgstr "mDNS-Abfrage kann nicht gestartet werden"
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
-msgstr "Schreiben nicht möglich"
+msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
@@ -2540,7 +2554,7 @@ msgid "array has too many dimensions"
 msgstr "Das Array hat zu viele Dimensionen"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "Array/Bytes auf der rechten Seite erforderlich"
 
@@ -3822,7 +3836,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "nur eine sample_rate=16000 wird unterstützt"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
@@ -4424,6 +4438,9 @@ msgstr "zi muss eine Gleitkommazahl sein"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi muss die Form (n_section, 2) haben"
 
+#~ msgid "Unable to write"
+#~ msgstr "Schreiben nicht möglich"
+
 #~ msgid "%q length must be >= 1"
 #~ msgstr "%q Länge muss >= 1 sein"
 

locale/el.po

@@ -112,6 +112,7 @@ msgstr "%q περιέχει διπλότυπα pins"
 msgid "%q failure: %d"
 msgstr "%q αποτυχία: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -192,7 +193,6 @@ msgstr "%q εκτός ορίων"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -406,6 +406,10 @@ msgstr "Το ADC2 χρησιμοποιείται απο το WIFI"
 msgid "Address must be %d bytes long"
 msgstr "Η διεύθυνση πρέπει να είναι %d bytes μεγάλη"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Όλα τα περιφεριακά CAN είναι σε χρήση"
@@ -486,7 +490,7 @@ msgstr "Ήδη διαφημίζουμε."
 msgid "Already have all-matches listener"
 msgstr "Ύπάρχει ήδη all-matches ακροατής"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -510,7 +514,7 @@ msgstr "Άλλη αποστολή είναι ήδη ενεργή"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "H παράταξη πρέπει να περιέχει halfwords (τύπου 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Η τιμές της παράταξη πρέπει να είναι μονά bytes."
@@ -939,10 +943,10 @@ msgstr ""
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr ""
@@ -1045,7 +1049,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1653,11 +1656,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1773,6 +1779,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1819,6 +1829,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -1963,7 +1977,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@@ -2237,8 +2251,8 @@ msgstr ""
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2494,7 +2508,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
@@ -3752,7 +3766,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""

locale/en_GB.po

@@ -110,6 +110,7 @@ msgstr "%q contains duplicate pins"
 msgid "%q failure: %d"
 msgstr "%q failure: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -190,7 +191,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -403,6 +403,10 @@ msgstr "ADC2 is being used by WiFi"
 msgid "Address must be %d bytes long"
 msgstr "Address must be %d bytes long"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "All CAN peripherals are in use"
@@ -483,7 +487,7 @@ msgstr "Already advertising."
 msgid "Already have all-matches listener"
 msgstr "Already have all-matches listener"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -507,7 +511,7 @@ msgstr "Another send is already active"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array must contain halfwords (type 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Array values should be single bytes."
@@ -928,10 +932,10 @@ msgstr "Error in regex"
 msgid "Error: Failure to bind"
 msgstr "Error: Failure to bind"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Expected a %q"
@@ -1034,7 +1038,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1648,11 +1651,14 @@ msgstr ""
 "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
 "%d bpp given"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1772,6 +1778,10 @@ msgstr ""
 "bytes.  If this cannot be avoided, pass allow_inefficient=True to the "
 "constructor"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "Pins must be sequential"
@@ -1816,6 +1826,10 @@ msgstr "Program does OUT without loading OSR"
 msgid "Program size invalid"
 msgstr "Program size invalid"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull not used when direction is output."
@@ -1960,7 +1974,7 @@ msgstr "Size not supported"
 msgid "Sleep Memory not available"
 msgstr "Sleep Memory not available"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice and value different lengths."
@@ -2241,8 +2255,8 @@ msgstr "Unable to read colour palette data"
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2501,7 +2515,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes required on right side"
 
@@ -3762,7 +3776,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "only sample_rate=16000 is supported"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "only slices with step=1 (aka None) are supported"

locale/es.po

@@ -112,6 +112,7 @@ msgstr "%q contiene pines duplicados"
 msgid "%q failure: %d"
 msgstr "%q fallo: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -192,7 +193,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -405,6 +405,10 @@ msgstr "ADC2 está siendo usado por WiFi"
 msgid "Address must be %d bytes long"
 msgstr "La dirección debe tener %d bytes de largo"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Todos los periféricos CAN están en uso"
@@ -487,7 +491,7 @@ msgstr "Ya se encuentra publicando."
 msgid "Already have all-matches listener"
 msgstr "Ya se tiene un escucha de todas las coincidencias"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -511,7 +515,7 @@ msgstr "Otro envío ya está activo"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "El array debe contener medias palabras (escriba 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Valores del array deben ser bytes individuales."
@@ -938,10 +942,10 @@ msgstr "Error en regex"
 msgid "Error: Failure to bind"
 msgstr "Error: fallo al vincular"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Se espera un %q"
@@ -1044,7 +1048,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1672,11 +1675,14 @@ msgstr ""
 "Solo se admiten BMP monocromáticos, indexados de 4 bpp u 8 bpp y 16 bpp o "
 "más: %d bpp proporcionados"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1797,6 +1803,10 @@ msgstr ""
 "ideales. Si esto no se puede evitar, pase allow_inefficient=True al "
 "constructor"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "Los pines deben estar en orden secuencial"
@@ -1844,6 +1854,10 @@ msgstr "El programa hace OUT sin cargar OSR"
 msgid "Program size invalid"
 msgstr "El tamaño del programa no es correcto"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull no se usa cuando la dirección es output."
@@ -1989,7 +2003,7 @@ msgstr "Sin capacidades para el tamaño"
 msgid "Sleep Memory not available"
 msgstr "Memoria de sueño no disponible"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice y value tienen tamaños diferentes."
@@ -2273,8 +2287,8 @@ msgstr "No se pudo leer los datos de la paleta de colores"
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2537,7 +2551,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes requeridos en el lado derecho"
 
@@ -3809,7 +3823,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "solo se admite sample_rate=16000"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "solo se admiten segmentos con step=1 (alias None)"

locale/fil.po

@@ -101,6 +101,7 @@ msgstr ""
 msgid "%q failure: %d"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -181,7 +182,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -395,6 +395,10 @@ msgstr ""
 msgid "Address must be %d bytes long"
 msgstr "ang palette ay dapat 32 bytes ang haba"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr ""
@@ -476,7 +480,7 @@ msgstr ""
 msgid "Already have all-matches listener"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -500,7 +504,7 @@ msgstr "Isa pang send ay aktibo na"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "May halfwords (type 'H') dapat ang array"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Array values ay dapat single bytes."
@@ -924,10 +928,10 @@ msgstr "May pagkakamali sa REGEX"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Umasa ng %q"
@@ -1030,7 +1034,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1643,11 +1646,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1764,6 +1770,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1808,6 +1818,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull hindi ginagamit kapag ang direksyon ay output."
@@ -1953,7 +1967,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice at value iba't ibang haba."
@@ -2227,8 +2241,8 @@ msgstr ""
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2486,7 +2500,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes kinakailangan sa kanang bahagi"
 
@@ -3761,7 +3775,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "ang mga slices lamang na may hakbang = 1 (aka None) ang sinusuportahan"

locale/fr.po

@@ -112,6 +112,7 @@ msgstr "%q contient des broches en double"
 msgid "%q failure: %d"
 msgstr "Échec de %q : %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -192,7 +193,6 @@ msgstr "%q est hors limites"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -405,6 +405,10 @@ msgstr "ADC2 est utilisé pars le Wifi"
 msgid "Address must be %d bytes long"
 msgstr "L'adresse doit être longue de %d octets"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Tous les périphériques CAN sont utilisés"
@@ -485,7 +489,7 @@ msgstr "S'annonce déjà."
 msgid "Already have all-matches listener"
 msgstr "Il y a déjà un auditeur all-matches"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -509,7 +513,7 @@ msgstr "Un autre envoi est déjà actif"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "La matrice doit contenir des demi-mots (type 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Les valeurs de la matrice doivent être des octets singuliers."
@@ -948,10 +952,10 @@ msgstr "Erreur dans l'expression régulière"
 msgid "Error: Failure to bind"
 msgstr "Erreur : Impossible de lier"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Attendu un %q"
@@ -1055,7 +1059,6 @@ msgstr "Le logiciel est identique"
 msgid "Firmware is invalid"
 msgstr "Logiciel invalide"
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr "Logiciel trop volumineux"
@@ -1692,11 +1695,14 @@ msgstr ""
 "Seulement les BMP monochromes, 4 bpp ou 8 bpp, ou 16 bpp et plus sont "
 "supportés: %d bpp fournis"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr "Une seul %q autorisée en sommeil profond."
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1817,6 +1823,10 @@ msgstr ""
 "octets idéal. Si cela ne peut pas être évité, transmettez allow_inefficient "
 "= True au constructeur"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "Les broches doivent être séquentielles"
@@ -1865,6 +1875,10 @@ msgstr "Le programme fait des sorties sans charger d'OSR"
 msgid "Program size invalid"
 msgstr "Taille du programme invalide"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'."
@@ -2009,7 +2023,7 @@ msgstr "Taille n'est pas supportée"
 msgid "Sleep Memory not available"
 msgstr "La mémoire de sommeil n'est pas disponible"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Tranche et valeur de tailles différentes."
@@ -2298,9 +2312,9 @@ msgstr "Impossible de lire les données de la palette de couleurs"
 msgid "Unable to start mDNS query"
 msgstr "Impossible de lancer la requête mDNS"
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
-msgstr "Écriture impossible"
+msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
@@ -2569,7 +2583,7 @@ msgid "array has too many dimensions"
 msgstr "la tableau à trop de dimensions"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "matrice/octets requis à la droite"
 
@@ -3852,7 +3866,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "seul sample_rate = 16000 est pris en charge"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "seules les tranches avec 'step=1' (cad None) sont supportées"
@@ -4452,6 +4466,9 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "Unable to write"
+#~ msgstr "Écriture impossible"
+
 #~ msgid "%q length must be >= 1"
 #~ msgstr "La longueur de %q doit être >= 1"
 

locale/hi.po

@@ -100,6 +100,7 @@ msgstr ""
 msgid "%q failure: %d"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -180,7 +181,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -393,6 +393,10 @@ msgstr ""
 msgid "Address must be %d bytes long"
 msgstr ""
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr ""
@@ -473,7 +477,7 @@ msgstr ""
 msgid "Already have all-matches listener"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -497,7 +501,7 @@ msgstr ""
 msgid "Array must contain halfwords (type 'H')"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr ""
@@ -914,10 +918,10 @@ msgstr ""
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr ""
@@ -1020,7 +1024,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1628,11 +1631,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1748,6 +1754,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1792,6 +1802,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -1936,7 +1950,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@@ -2210,8 +2224,8 @@ msgstr ""
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2467,7 +2481,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
@@ -3725,7 +3739,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""

locale/it_IT.po

@@ -107,6 +107,7 @@ msgstr ""
 msgid "%q failure: %d"
 msgstr "%q fallito: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -187,7 +188,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -401,6 +401,10 @@ msgstr "ADC2 sta usando il WiFi"
 msgid "Address must be %d bytes long"
 msgstr "L'indirizzo deve essere lungo %d byte"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Tutte le periferiche CAN sono in uso"
@@ -482,7 +486,7 @@ msgstr ""
 msgid "Already have all-matches listener"
 msgstr "Già in possesso di tutti i listener abbinati"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -506,7 +510,7 @@ msgstr "Another send è gia activato"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array deve avere mezzoparole (typo 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "I valori dell'Array dovrebbero essere bytes singoli."
@@ -929,10 +933,10 @@ msgstr "Errore nella regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Atteso un %q"
@@ -1035,7 +1039,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1650,11 +1653,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1773,6 +1779,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1818,6 +1828,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -1963,7 +1977,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@@ -2237,8 +2251,8 @@ msgstr ""
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2496,7 +2510,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
@@ -3772,7 +3786,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "solo slice con step=1 (aka None) sono supportate"

locale/ja.po

@@ -105,6 +105,7 @@ msgstr ""
 msgid "%q failure: %d"
 msgstr "%q 失敗: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -185,7 +186,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -398,6 +398,10 @@ msgstr ""
 msgid "Address must be %d bytes long"
 msgstr "アドレスは、%dバイト長でなければなりません"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "全てのCAN周辺機器が使用中"
@@ -478,7 +482,7 @@ msgstr "すでにアドバータイズ中"
 msgid "Already have all-matches listener"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -502,7 +506,7 @@ msgstr "他のsendがすでにアクティブ"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "array のタイプは16ビット ('H') でなければなりません"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Arrayの各値は1バイトでなければなりません"
@@ -923,10 +927,10 @@ msgstr "正規表現にエラーがあります"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "%qが必要"
@@ -1029,7 +1033,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1641,11 +1644,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1761,6 +1767,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1805,6 +1815,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "方向がoutputのときpullは使われません"
@@ -1949,7 +1963,7 @@ msgstr "サイズは対応していません"
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "スライスと値の長さが一致しません"
@@ -2224,8 +2238,8 @@ msgstr "カラーパレットデータを読み込めません"
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2481,7 +2495,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "右辺にはarray/bytesが必要"
 
@@ -3744,7 +3758,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""

locale/ko.po

@@ -101,6 +101,7 @@ msgstr ""
 msgid "%q failure: %d"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -181,7 +182,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -394,6 +394,10 @@ msgstr ""
 msgid "Address must be %d bytes long"
 msgstr ""
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr ""
@@ -474,7 +478,7 @@ msgstr ""
 msgid "Already have all-matches listener"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -498,7 +502,7 @@ msgstr ""
 msgid "Array must contain halfwords (type 'H')"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr ""
@@ -917,10 +921,10 @@ msgstr "Regex에 오류가 있습니다."
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "%q 이 예상되었습니다."
@@ -1023,7 +1027,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1631,11 +1634,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1751,6 +1757,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1795,6 +1805,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -1939,7 +1953,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@@ -2214,8 +2228,8 @@ msgstr ""
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2471,7 +2485,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
@@ -3729,7 +3743,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""

locale/nl.po

@@ -103,6 +103,7 @@ msgstr ""
 msgid "%q failure: %d"
 msgstr "%q fout: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -183,7 +184,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -396,6 +396,10 @@ msgstr "ADC2 wordt gebruikt door WiFi"
 msgid "Address must be %d bytes long"
 msgstr "Adres moet %d bytes lang zijn"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Alle CAN-peripherals zijn in gebruik"
@@ -476,7 +480,7 @@ msgstr "Advertising is al bezig."
 msgid "Already have all-matches listener"
 msgstr "Heeft al een luisteraar voor 'all-matches'"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -500,7 +504,7 @@ msgstr "Een andere send is al actief"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array moet halfwords (type 'H') bevatten"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Array waardes moet enkele bytes zijn."
@@ -922,10 +926,10 @@ msgstr "Fout in regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Verwacht een %q"
@@ -1028,7 +1032,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1645,11 +1648,14 @@ msgstr ""
 "Alleen monochrome en 4bpp of 8bpp, en 16bpp of grotere geïndiceerde BMP's "
 "zijn ondersteund: %d bpp is gegeven"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1770,6 +1776,10 @@ msgstr ""
 "gebruikt. Als dit niet kan worden vermeden, geef dan het argument "
 "allow_inefficient=True aan de constructor"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1816,6 +1826,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull niet gebruikt wanneer de richting output is."
@@ -1960,7 +1974,7 @@ msgstr "Afmeting niet ondersteund"
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice en waarde hebben verschillende lengtes."
@@ -2234,8 +2248,8 @@ msgstr "Niet in staat kleurenpalet data te lezen"
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2497,7 +2511,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes vereist aan de rechterkant"
 
@@ -3762,7 +3776,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "alleen sample_rate=16000 wordt ondersteund"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "alleen segmenten met step=1 (ook wel None) worden ondersteund"

locale/pl.po

@@ -105,6 +105,7 @@ msgstr ""
 msgid "%q failure: %d"
 msgstr "%q niepowodzenie: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -185,7 +186,6 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -398,6 +398,10 @@ msgstr "ADC2 jest używany przez WiFi"
 msgid "Address must be %d bytes long"
 msgstr "Adres musi mieć %d bajtów"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr ""
@@ -478,7 +482,7 @@ msgstr ""
 msgid "Already have all-matches listener"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -502,7 +506,7 @@ msgstr "Wysyłanie jest już w toku"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Tablica musi zawierać pół-słowa (typ 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Wartości powinny być bajtami."
@@ -923,10 +927,10 @@ msgstr "Błąd w regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Oczekiwano %q"
@@ -1029,7 +1033,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr ""
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr ""
@@ -1639,11 +1642,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1759,6 +1765,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1803,6 +1813,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Podciągnięcie nieużywane w trybie wyjścia."
@@ -1947,7 +1961,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Fragment i wartość są różnych długości."
@@ -2221,8 +2235,8 @@ msgstr "Nie można odczytać danych palety"
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2478,7 +2492,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "tablica/bytes wymagane po prawej stronie"
 
@@ -3737,7 +3751,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "obsługiwane jest tylko sample_rate=16000"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "tylko fragmenty ze step=1 (lub None) są wspierane"

locale/pt_BR.po

@@ -109,6 +109,7 @@ msgstr "%q contém pinos duplicados"
 msgid "%q failure: %d"
 msgstr "%q falha: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -189,7 +190,6 @@ msgstr "%q fora dos limites"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -406,6 +406,10 @@ msgstr "O ADC2 está sendo usado pelo WiFi"
 msgid "Address must be %d bytes long"
 msgstr "O endereço deve ter %d bytes de comprimento"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Todos os periféricos CAN estão em uso"
@@ -486,7 +490,7 @@ msgstr "Já está anunciando."
 msgid "Already have all-matches listener"
 msgstr "Já há um ouvinte com todas as correspondências"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -510,7 +514,7 @@ msgstr "Outro envio já está ativo"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array deve conter meias palavras (tipo 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Os valores das matrizes devem ser bytes simples."
@@ -941,10 +945,10 @@ msgstr "Erro no regex"
 msgid "Error: Failure to bind"
 msgstr "Erro: Falha na vinculação"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Esperado um"
@@ -1047,7 +1051,6 @@ msgstr "O firmware está duplicado"
 msgid "Firmware is invalid"
 msgstr "O firmware é inválido"
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr "O firmware é muito grande"
@@ -1674,11 +1677,14 @@ msgstr ""
 "São compatíveis apenas os BMPs monocromáticos, indexados em 4bpp ou 8bpp e "
 "16bpp ou superior: determinado %d bpp"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr "Apenas um %q pode ser colocado em hibernação profunda."
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1799,6 +1805,10 @@ msgstr ""
 "ideal. Caso isso não possa ser evitado, passe allow_inefficient=True ao "
 "construtor"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "Os pinos devem ser sequenciais"
@@ -1848,6 +1858,10 @@ msgstr "O programa faz OUT sem carregar o OSR"
 msgid "Program size invalid"
 msgstr "O tamanho do programa é inválido"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "O Pull não foi usado quando a direção for gerada."
@@ -1992,7 +2006,7 @@ msgstr "O tamanho não é suportado"
 msgid "Sleep Memory not available"
 msgstr "Sleep memory não está disponível"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Fatie e avalie os diferentes comprimentos."
@@ -2280,9 +2294,9 @@ msgstr "Não foi possível ler os dados da paleta de cores"
 msgid "Unable to start mDNS query"
 msgstr "Não é possível iniciar a consulta mDNS"
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
-msgstr "Não é possível escrever"
+msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
@@ -2550,7 +2564,7 @@ msgid "array has too many dimensions"
 msgstr "a matriz possui muitas dimensões"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "matriz/bytes são necessários no lado direito"
 
@@ -3825,7 +3839,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "apenas sample_rate = 16000 é compatível"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
@@ -4427,6 +4441,9 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "Unable to write"
+#~ msgstr "Não é possível escrever"
+
 #~ msgid "%q length must be >= 1"
 #~ msgstr "o comprimento %q deve ser >=1"
 

locale/ru.po

@@ -111,6 +111,7 @@ msgstr "%q содержит пины-дупликаты"
 msgid "%q failure: %d"
 msgstr "%q сбой: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -191,7 +192,6 @@ msgstr "%q за пределом"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -404,6 +404,10 @@ msgstr "ADC2 используется WiFi"
 msgid "Address must be %d bytes long"
 msgstr "Адрес должен быть длиной %d байт"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Все периферийные устройства CAN уже используются"
@@ -484,7 +488,7 @@ msgstr "Уже объявляемся (advertising)."
 msgid "Already have all-matches listener"
 msgstr "Уже есть универсальный слушатель"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -508,7 +512,7 @@ msgstr "Другая передача уже активна"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Массив должен содержать полуслова (тип 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Значения массива должны быть однобайтовыми."
@@ -945,10 +949,10 @@ msgstr "Ошибка в регулярном выражении(regex)"
 msgid "Error: Failure to bind"
 msgstr "Ошибка: Сбой привязки"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Ожидалось(ся) %q"
@@ -1054,7 +1058,6 @@ msgstr "Прошивка является дубликатом"
 msgid "Firmware is invalid"
 msgstr "Прошивка является неправильной"
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr "Прошивка слишком большая"
@@ -1689,11 +1692,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1812,6 +1818,10 @@ msgstr ""
 "%d байт.   Если этого нельзя избежать, передайте allow_inefficient=True в "
 "конструктор"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "Пины должны быть последовательными"
@@ -1858,6 +1868,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -2002,7 +2016,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@@ -2278,8 +2292,8 @@ msgstr ""
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2535,7 +2549,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
@@ -3793,7 +3807,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""

locale/sv.po

@@ -108,6 +108,7 @@ msgstr "%q innehåller dubblettstift"
 msgid "%q failure: %d"
 msgstr "%q-fel: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -190,7 +191,6 @@ msgstr "%q är utanför gränserna"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -403,6 +403,10 @@ msgstr "ADC2 används av WiFi"
 msgid "Address must be %d bytes long"
 msgstr "Adressen måste vara %d byte lång"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "All I2C-kringutrustning används"
@@ -483,7 +487,7 @@ msgstr "Annonserar redan."
 msgid "Already have all-matches listener"
 msgstr "Har redan lyssnare för all-matchningar"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -507,7 +511,7 @@ msgstr "En annan send är redan aktiv"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Matrisen måste innehålla halfwords (typ \"H\")"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Matrisvärden ska bestå av enstaka bytes."
@@ -931,10 +935,10 @@ msgstr "Fel i regex"
 msgid "Error: Failure to bind"
 msgstr "Fel: Bind misslyckades"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Förväntade %q"
@@ -1037,7 +1041,6 @@ msgstr "Firmware är en dubblett"
 msgid "Firmware is invalid"
 msgstr "Firmware är ogiltig"
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr "Firmware är för stor"
@@ -1657,11 +1660,14 @@ msgstr ""
 "Endast monokrom, indexerad 4 bpp eller 8 bpp och 16 bpp eller högre BMP: er "
 "stöds: %d bpp angiven"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr "Endast en %q kan sättas i djup sömn."
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1782,6 +1788,10 @@ msgstr ""
 "%d byte.  Om detta inte kan undvikas, skicka allow_inefficient=True till "
 "konstruktorn"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "Pinnarna måste vara i sekvens"
@@ -1828,6 +1838,10 @@ msgstr "Program gör OUT utan att läsa in OSR"
 msgid "Program size invalid"
 msgstr "Programstorlek ogiltig"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull används inte när riktningen är output."
@@ -1972,7 +1986,7 @@ msgstr "Storleken stöds inte"
 msgid "Sleep Memory not available"
 msgstr "Sömnminne inte tillgängligt"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice och värde har olika längd."
@@ -2256,9 +2270,9 @@ msgstr "Det går inte att läsa färgpalettdata"
 msgid "Unable to start mDNS query"
 msgstr "Det gick inte att starta mDNS-frågan"
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
-msgstr "Kan inte skriva"
+msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
@@ -2523,7 +2537,7 @@ msgid "array has too many dimensions"
 msgstr "array har för många dimensioner"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes krävs på höger sida"
 
@@ -3791,7 +3805,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "enbart sample_rate=16000 stöds"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "endast segment med steg=1 (aka Ingen) stöds"
@@ -4389,6 +4403,9 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 
+#~ msgid "Unable to write"
+#~ msgstr "Kan inte skriva"
+
 #~ msgid "%q length must be >= 1"
 #~ msgstr "längden på %q måste vara >= 1"
 

locale/tr.po

@@ -112,6 +112,7 @@ msgstr "%q yinelenen pinler içeriyor"
 msgid "%q failure: %d"
 msgstr "%q hata: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -192,7 +193,6 @@ msgstr "%q sınırların dışında"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -406,6 +406,10 @@ msgstr "ADC2, WiFi tarafından kullanılmaktadır"
 msgid "Address must be %d bytes long"
 msgstr "Adres %d byte uzunluğunda olmalıdır"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "Tüm CAN çevre birimleri kullanımda"
@@ -486,7 +490,7 @@ msgstr "Halihazırda duyuruluyor."
 msgid "Already have all-matches listener"
 msgstr "Tüm eşleşmelerle eşleşen dinleyiciniz var"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -510,7 +514,7 @@ msgstr "Başka bir gönderme zaten aktif"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Dizi yarımsözcüklere sahip olmalıdır (tip 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Dizi değerleri tekil bytelar olmalıdır."
@@ -930,10 +934,10 @@ msgstr "regex'te hata"
 msgid "Error: Failure to bind"
 msgstr "Hata: Bağlanamadı"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "%q bekleniyor"
@@ -1036,7 +1040,6 @@ msgstr ""
 msgid "Firmware is invalid"
 msgstr "Yazılım geçersiz"
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr "Yazılım çok büyük"
@@ -1651,11 +1654,14 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1771,6 +1777,10 @@ msgid ""
 "constructor"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr ""
@@ -1818,6 +1828,10 @@ msgstr ""
 msgid "Program size invalid"
 msgstr ""
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -1962,7 +1976,7 @@ msgstr ""
 msgid "Sleep Memory not available"
 msgstr ""
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@@ -2236,8 +2250,8 @@ msgstr ""
 msgid "Unable to start mDNS query"
 msgstr ""
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
 msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
@@ -2493,7 +2507,7 @@ msgid "array has too many dimensions"
 msgstr ""
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
@@ -3751,7 +3765,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""

locale/zh_Latn_pinyin.po

@@ -111,6 +111,7 @@ msgstr "%q bāo hán chóng fù de yǐn jiǎo"
 msgid "%q failure: %d"
 msgstr "%q Shībài: %d"
 
+#: ports/espressif/common-hal/espulp/ULP.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
@@ -192,7 +193,6 @@ msgstr "%q chāo chū jiè xiàn"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
@@ -405,6 +405,10 @@ msgstr "ADC2 zhèngzài bèi WiFi shǐ yòng"
 msgid "Address must be %d bytes long"
 msgstr "dìzhǐ chángdù bìxū shì %d zìjié"
 
+#: ports/espressif/common-hal/memorymap/AddressRange.c
+msgid "Address range not allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
 msgstr "suǒyǒu CAN wàishè dōu zài shǐyòng zhōng"
@@ -485,7 +489,7 @@ msgstr "Mùqián zhèngzài guǎngbō."
 msgid "Already have all-matches listener"
 msgstr "yǐjīng yǒu all-matches jiāntīng qì"
 
-#: ports/espressif/common-hal/coproc/__init__.c
+#: ports/espressif/common-hal/espulp/ULP.c
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
 msgid "Already running"
@@ -509,7 +513,7 @@ msgstr "Lìng yīgè fāsòng (send) yǐjīng zài gōngzuò"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Shùzǔ bìxū bāohán halfwords (type 'H')"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "shùzǔ de zhí yīnggāi shì dān'gè zìjié."
@@ -932,10 +936,10 @@ msgstr "Zhèngzé biǎodá shì cuòwù"
 msgid "Error: Failure to bind"
 msgstr "cuò wù: bǎng dìng shī bài"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/espressif/bindings/espulp/ULP.c py/enum.c
-#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
-#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c
+#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c
-#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 msgid "Expected a %q"
 msgstr "Yù qí %q"
@@ -1038,7 +1042,6 @@ msgstr "gù jiàn chóng fù"
 msgid "Firmware is invalid"
 msgstr "gù jiàn wú xiào"
 
-#: ports/espressif/common-hal/coproc/Coproc.c
 #: ports/espressif/common-hal/dualbank/__init__.c
 msgid "Firmware is too big"
 msgstr "gù jiàn tài dà"
@@ -1663,11 +1666,14 @@ msgstr ""
 "Jǐn zhīchí dān sè, suǒyǐn wéi 4bpp huò 8bpp yǐjí 16bpp huò gèng gāo de BMP: "
 "Gěi chū %d bpp"
 
-#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c
 #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
 msgid "Only one %q can be set in deep sleep."
 msgstr "zài shēn dù shuì mián zhōng zhǐ néng shè zhì yí gè %q."
 
+#: ports/espressif/common-hal/espulp/ULPAlarm.c
+msgid "Only one %q can be set."
+msgstr ""
+
 #: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
@@ -1786,6 +1792,10 @@ msgstr ""
 "duōzì jié. Rúguǒ wúfǎ bìmiǎn, qǐng jiāng allow_inefficient = True chuándì "
 "gěigòuzào hánshù"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Pins 21+ not supported from ULP"
+msgstr ""
+
 #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
 msgid "Pins must be sequential"
 msgstr "yǐn jiǎo bì xū shì lián xù de"
@@ -1832,6 +1842,10 @@ msgstr "chéng xù zài bù jiā zǎi Osr de qíng kuàng xià zhí xíng OUT"
 msgid "Program size invalid"
 msgstr "chéng xù dà xiǎo wú xiào"
 
+#: ports/espressif/common-hal/espulp/ULP.c
+msgid "Program too long"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Fāngxiàng shūchū shí Pull méiyǒu shǐyòng."
@@ -1976,7 +1990,7 @@ msgstr "bù zhī chí dà xiǎo"
 msgid "Sleep Memory not available"
 msgstr "shuì mián jì yì bù kě yòng"
 
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Qiēpiàn hé zhí bùtóng chángdù."
@@ -2261,9 +2275,9 @@ msgstr "Wúfǎ dúqǔ tiáosèbǎn shùjù"
 msgid "Unable to start mDNS query"
 msgstr "wú fǎ qǐ dòng mDNS chá xún"
 
-#: shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/memorymap/AddressRange.c
-msgid "Unable to write"
+msgid "Unable to write to address."
-msgstr "wú fǎ xiě rù"
+msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
@@ -2528,7 +2542,7 @@ msgid "array has too many dimensions"
 msgstr "shùzǔ yǒu tài duō wéidù"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
-#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c
+#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "yòu cè xūyào shùzǔ/zì jié"
 
@@ -3795,7 +3809,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "Jǐn zhīchí cǎiyàng lǜ = 16000"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "jǐn zhīchí bù zhǎng = 1(jí wú) de qiēpiàn"
@@ -4395,6 +4409,9 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 
+#~ msgid "Unable to write"
+#~ msgstr "wú fǎ xiě rù"
+
 #~ msgid "%q length must be >= 1"
 #~ msgstr "%q cháng dù bìxū >= 1"
 

py/nlrthumb.c

@@ -36,7 +36,7 @@
 // For reference, arm/thumb callee save regs are:
 //      r4-r11, r13=sp
 
-__attribute__((naked)) unsigned int nlr_push(nlr_buf_t *nlr) {
+__attribute__((naked, returns_twice)) unsigned int nlr_push(nlr_buf_t *nlr) {
 
     __asm volatile (
         "str    r4, [r0, #12]       \n" // store r4 into nlr_buf