docs: Update network docs to reflect changes to code.

docs/library/network.rst

@@ -5,27 +5,116 @@
 .. module:: network
    :synopsis: network configuration
 
-This module provides network drivers and routing configuration.
+This module provides network drivers and routing configuration.  Network
+drivers for specific hardware are available within this module and are
+used to configure a hardware network interface.  Configured interfaces
+are then available for use via the :mod:`socket` module.
 
+For example::
 
-class CC3k
+    # configure a specific network interface
+    # see below for examples of specific drivers
+    import network
+    nic = network.Driver(...)
+    print(nic.ifconfig())
+
+    # now use socket as usual
+    import socket
+    addr = socket.getaddrinfo('micropython.org', 80)[0][-1]
+    s = socket.socket()
+    s.connect(addr)
+    s.send(b'GET / HTTP/1.1\r\nHost: micropython.org\r\n\r\n')
+    data = s.recv(1000)
+    s.close()
+
+class CC3K
 ==========
 
+This class provides a driver for CC3000 wifi modules.  Example usage::
+
+    import network
+    nic = network.CC3K(pyb.SPI(2), pyb.Pin.board.Y5, pyb.Pin.board.Y4, pyb.Pin.board.Y3)
+    nic.connect('your-ssid', 'your-password')
+    while not nic.isconnected():
+        pyb.delay(50)
+    print(nic.ifconfig())
+
+    # now use socket as usual
+    ...
+
+For this example to work the CC3000 module must have the following connections:
+
+    - MOSI connected to Y8
+    - MISO connected to Y7
+    - CLK connected to Y6
+    - CS connected to Y5
+    - VBEN connected to Y4
+    - IRQ connected to Y3
+
+It is possible to use other SPI busses and other pins for CS, VBEN and IRQ.
+
 Constructors
 ------------
 
-.. class:: CC3k(spi, pin_cs, pin_en, pin_irq)
+.. class:: CC3K(spi, pin_cs, pin_en, pin_irq)
 
-   Initialise the CC3000 using the given SPI bus and pins and return a CC3k object.
+   Create a CC3K driver object, initialise the CC3000 module using the given SPI bus
+   and pins, and return the CC3K object.
 
+   Arguments are:
+
+     - ``spi`` is an :ref:`SPI object <pyb.SPI>` which is the SPI bus that the CC3000 is
+       connected to (the MOSI, MISO and CLK pins).
+     - ``pin_cs`` is a :ref:`Pin object <pyb.Pin>` which is connected to the CC3000 CS pin.
+     - ``pin_en`` is a :ref:`Pin object <pyb.Pin>` which is connected to the CC3000 VBEN pin.
+     - ``pin_irq`` is a :ref:`Pin object <pyb.Pin>` which is connected to the CC3000 IRQ pin.
+
+   All of these objects will be initialised by the driver, so there is no need to
+   initialise them yourself.  For example, you can use::
+
+     nic = network.CC3K(pyb.SPI(2), pyb.Pin.board.Y5, pyb.Pin.board.Y4, pyb.Pin.board.Y3)
 
 Methods
 -------
 
 .. method:: cc3k.connect(ssid, key=None, \*, security=WPA2, bssid=None)
 
+   Connect to a wifi access point using the given SSID, and other security
+   parameters.
 
-class WIZnet5k
+.. method:: cc3k.disconnect()
+
+   Disconnect from the wifi access point.
+
+.. method:: cc3k.isconnected()
+
+   Returns True if connected to a wifi access point and has a valid IP address,
+   False otherwise.
+
+.. method:: cc3k.ifconfig()
+
+   Returns a 7-tuple with (ip, subnet mask, gateway, DNS server, DHCP server,
+   MAC address, SSID).
+
+.. method:: cc3k.patch_version()
+
+   Return the version of the patch program (firmware) on the CC3000.
+
+.. method:: cc3k.patch_program('pgm')
+
+   Upload the current firmware to the CC3000.  You must pass 'pgm' as the first
+   argument in order for the upload to proceed.
+
+Constants
+---------
+
+.. data:: CC3K.WEP
+.. data:: CC3K.WPA
+.. data:: CC3K.WPA2
+
+   security type to use
+
+class WIZNET5K
 ==============
 
 This class allows you to control WIZnet5x00 Ethernet adaptors based on
@@ -33,31 +122,56 @@ the W5200 and W5500 chipsets (only W5200 tested).
 
 Example usage::
 
-    import wiznet5k
+    import network
-    w = wiznet5k.WIZnet5k()
+    nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
-    print(w.ipaddr())
+    print(nic.ifconfig())
-    w.gethostbyname('micropython.org')
-    s = w.socket()
-    s.connect(('192.168.0.2', 8080))
-    s.send('hello')
-    print(s.recv(10))
 
+    # now use socket as usual
+    ...
+
+For this example to work the WIZnet5x00 module must have the following connections:
+
+    - MOSI connected to X8
+    - MISO connected to X7
+    - SCLK connected to X6
+    - nSS connected to X5
+    - nRESET connected to X4
+
+It is possible to use other SPI busses and other pins for nSS and nRESET.
 
 Constructors
 ------------
 
-.. class:: WIZnet5k(spi, pin_cs, pin_rst)
+.. class:: WIZNET5K(spi, pin_cs, pin_rst)
 
-   Create and return a WIZnet5k object.
+   Create a WIZNET5K driver object, initialise the WIZnet5x00 module using the given
+   SPI bus and pins, and return the WIZNET5K object.
 
+   Arguments are:
+
+     - ``spi`` is an :ref:`SPI object <pyb.SPI>` which is the SPI bus that the WIZnet5x00 is
+       connected to (the MOSI, MISO and SCLK pins).
+     - ``pin_cs`` is a :ref:`Pin object <pyb.Pin>` which is connected to the WIZnet5x00 nSS pin.
+     - ``pin_rst`` is a :ref:`Pin object <pyb.Pin>` which is connected to the WIZnet5x00 nRESET pin.
+
+   All of these objects will be initialised by the driver, so there is no need to
+   initialise them yourself.  For example, you can use::
+
+     nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
 
 Methods
 -------
 
-.. method:: wiznet5k.ipaddr([(ip, subnet, gateway, dns)])
+.. method:: wiznet5k.ifconfig([(ip, subnet, gateway, dns)])
 
    Get/set IP address, subnet mask, gateway and DNS.
 
+   When called with no arguments, this method returns a 4-tuple with the above information.
+
+   To set the above values, pass a 4-tuple with the required information.  For example::
+
+    nic.ifconfig(('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8'))
+
 .. method:: wiznet5k.regs()
 
-   Dump WIZnet5k registers.
+   Dump the WIZnet5x00 registers.  Useful for debugging.