Added type hints previously missed

shared-bindings/_pixelbuf/__init__.c

@@ -41,7 +41,7 @@
 //| Byteorders are configured with strings, such as "RGB" or "RGBD"."""
 // TODO: Pull in docs from pypixelbuf.
 
-//| def colorwheel(n: int) -> Any:
+//| def colorwheel(n: int) -> int:
 //|     """C implementation of the common wheel() function found in many examples.
 //|     Returns the colorwheel RGB value as an integer value for n (usable in :py:class:`PixelBuf`, neopixel, and dotstar)."""
 //|     ...

shared-bindings/digitalio/Direction.c

@@ -46,10 +46,10 @@
 //|         going."""
 //|         ...
 //|
-//|     INPUT: Any = ...
+//|     INPUT: Direction = ...
 //|     """Read digital data in"""
 //|
-//|     OUTPUT: Any = ...
+//|     OUTPUT: Direction = ...
 //|     """Write digital data out"""
 //|
 const mp_obj_type_t digitalio_direction_type;

shared-bindings/digitalio/DriveMode.c

@@ -34,10 +34,10 @@
 //|         digital values."""
 //|         ...
 //|
-//|     PUSH_PULL: Any = ...
+//|     PUSH_PULL: DriveMode = ...
 //|     """Output both high and low digital values"""
 //|
-//|     OPEN_DRAIN: Any = ...
+//|     OPEN_DRAIN: DriveMode = ...
 //|     """Output low digital values but go into high z for digital high. This is
 //|     useful for i2c and other protocols that share a digital line."""
 //|

shared-bindings/digitalio/Pull.c

@@ -34,11 +34,11 @@
 //|         digital values in."""
 //|         ...
 //|
-//|     UP: Any = ...
+//|     UP: Pull = ...
 //|     """When the input line isn't being driven the pull up can pull the state
 //|     of the line high so it reads as true."""
 //|
-//|     DOWN: Any = ...
+//|     DOWN: Pull = ...
 //|     """When the input line isn't being driven the pull down can pull the
 //|     state of the line low so it reads as false."""
 //|

shared-bindings/displayio/__init__.c

@@ -50,7 +50,7 @@
 //|
 
 
-//| def release_displays() -> Any:
+//| def release_displays() -> None:
 //|     """Releases any actively used displays so their busses and pins can be used again. This will also
 //|     release the builtin display on boards that have one. You will need to reinitialize it yourself
 //|     afterwards. This may take seconds to complete if an active EPaperDisplay is refreshing.

shared-bindings/microcontroller/__init__.c

@@ -54,7 +54,7 @@
 //| This object is the sole instance of `microcontroller.Processor`."""
 //|
 
-//| def delay_us(delay: Any) -> Any:
+//| def delay_us(delay: int) -> None:
 //|     """Dedicated delay method used for very short delays. **Do not** do long delays
 //|     because this stops all other functions from completing. Think of this as an empty
 //|     ``while`` loop that runs for the specified ``(delay)`` time. If you have other
@@ -72,7 +72,7 @@ STATIC mp_obj_t mcu_delay_us(mp_obj_t delay_obj) {
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_1(mcu_delay_us_obj, mcu_delay_us);
 
-//| def disable_interrupts() -> Any:
+//| def disable_interrupts() -> None:
 //|     """Disable all interrupts. Be very careful, this can stall everything."""
 //|     ...
 //|
@@ -82,7 +82,7 @@ STATIC mp_obj_t mcu_disable_interrupts(void) {
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_disable_interrupts_obj, mcu_disable_interrupts);
 
-//| def enable_interrupts() -> Any:
+//| def enable_interrupts() -> None:
 //|     """Enable the interrupts that were enabled at the last disable."""
 //|     ...
 //|
@@ -92,7 +92,7 @@ STATIC mp_obj_t mcu_enable_interrupts(void) {
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_enable_interrupts_obj, mcu_enable_interrupts);
 
-//| def on_next_reset(run_mode: microcontroller.RunMode) -> Any:
+//| def on_next_reset(run_mode: microcontroller.RunMode) -> None:
 //|     """Configure the run mode used the next time the microcontroller is reset but
 //|     not powered down.
 //|
@@ -117,7 +117,7 @@ STATIC mp_obj_t mcu_on_next_reset(mp_obj_t run_mode_obj) {
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_1(mcu_on_next_reset_obj, mcu_on_next_reset);
 
-//| def reset() -> Any:
+//| def reset() -> None:
 //|     """Reset the microcontroller. After reset, the microcontroller will enter the
 //|     run mode last set by `on_next_reset`.
 //|

shared-bindings/socket/__init__.c

@@ -509,7 +509,7 @@ STATIC const mp_obj_type_t socket_type = {
     .locals_dict = (mp_obj_dict_t*)&socket_locals_dict,
 };
 
-//| def getaddrinfo(host: Any, port: Any) -> Any:
+//| def getaddrinfo(host: string, port: string) -> tuple:
 //|     """Gets the address information for a hostname and port
 //|
 //|     Returns the appropriate family, socket type, socket protocol and