Merge pull request #2596 from hierophect/stm32-espruino-pico
STM32: Espruino Pico
This commit is contained in:
hierophect
GitHub
commit
b93d6e861b
1
.github/workflows/build.yml
vendored
1
.github/workflows/build.yml
vendored
@ -146,6 +146,7 @@ jobs:
|
|||||||
- "electronut_labs_blip"
|
- "electronut_labs_blip"
|
||||||
- "electronut_labs_papyr"
|
- "electronut_labs_papyr"
|
||||||
- "escornabot_makech"
|
- "escornabot_makech"
|
||||||
|
- "espruino_pico"
|
||||||
- "feather_bluefruit_sense"
|
- "feather_bluefruit_sense"
|
||||||
- "feather_m0_adalogger"
|
- "feather_m0_adalogger"
|
||||||
- "feather_m0_basic"
|
- "feather_m0_basic"
|
||||||
|
|||||||
107
ports/stm32f4/boards/STM32F401xd_fs.ld
Normal file
107
ports/stm32f4/boards/STM32F401xd_fs.ld
Normal file
@ -0,0 +1,107 @@
|
|||||||
|
/*
|
||||||
|
GNU linker script for STM32F401 with bootloader (such as the Meowbit)
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 384K /* entire flash */
|
||||||
|
FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sector 0 */
|
||||||
|
FLASH_FS (rx) : ORIGIN = 0x08004000, LENGTH = 48K /* sectors 1,2,3 are 16K */
|
||||||
|
FLASH_TEXT (rx) : ORIGIN = 0x08010000, LENGTH = 320K /* sector 4 is 64K, sectors 5,6,7 are 128K */
|
||||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* produce a link error if there is not this amount of RAM for these sections */
|
||||||
|
_minimum_stack_size = 2K;
|
||||||
|
_minimum_heap_size = 16K;
|
||||||
|
|
||||||
|
/* Define tho top end of the stack. The stack is full descending so begins just
|
||||||
|
above last byte of RAM. Note that EABI requires the stack to be 8-byte
|
||||||
|
aligned for a call. */
|
||||||
|
_estack = ORIGIN(RAM) + LENGTH(RAM);
|
||||||
|
|
||||||
|
/* RAM extents for the garbage collector */
|
||||||
|
_ram_start = ORIGIN(RAM);
|
||||||
|
_ram_end = ORIGIN(RAM) + LENGTH(RAM);
|
||||||
|
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
|
||||||
|
/* This first flash block is 16K annd the isr vectors only take up
|
||||||
|
about 400 bytes. Micropython pads this with files, but this didn't
|
||||||
|
work with the size of Circuitpython's ff object. */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH_ISR
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
/* *(.glue_7) */ /* glue arm to thumb code */
|
||||||
|
/* *(.glue_7t) */ /* glue thumb to arm code */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbol at end of code */
|
||||||
|
} >FLASH_TEXT
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* This is the initialized data section
|
||||||
|
The program executes knowing that the data is in the RAM
|
||||||
|
but the loader puts the initial values in the FLASH (inidata).
|
||||||
|
It is one task of the startup to copy the initial values from FLASH to RAM. */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start; used by startup code in order to initialise the .data section in RAM */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end; used by startup code in order to initialise the .data section in RAM */
|
||||||
|
} >RAM AT> FLASH_TEXT
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sbss = .; /* define a global symbol at bss start; used by startup code */
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end; used by startup code and GC */
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* this is to define the start of the heap, and make sure we have a minimum size */
|
||||||
|
.heap :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
. = . + _minimum_heap_size;
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* this just checks there is enough RAM for the stack */
|
||||||
|
.stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
. = . + _minimum_stack_size;
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
15
ports/stm32f4/boards/espruino_pico/README.md
Normal file
15
ports/stm32f4/boards/espruino_pico/README.md
Normal file
@ -0,0 +1,15 @@
|
|||||||
|
# Flashing the Espruino Pico
|
||||||
|
|
||||||
|
The Espruino Pico is normally updated via a bootloader activated by the Espruino web app. This approach is not practical for Circuitpython as it takes too much space from the internal filesystem - thus, you will need to follow the instructions for advanced reflashing using the built-in ROM bootloader on all STM32F4 MCUs (instructions sourced from https://www.espruino.com/Pico#advanced-reflashing)
|
||||||
|
|
||||||
|
- Short out the BOOT0/BTN solder jumper on the back of the board - you can do this by drawing over it with a pencil.
|
||||||
|
- Install ST's DFU utility on Windows, or dfu-util for Mac or Linux
|
||||||
|
- **Mac**: install with Homebrew: `brew install dfu-util`
|
||||||
|
- **Linux**: install with apt-get: `sudo apt-get install dfu-util`
|
||||||
|
- **Windows**: download [ST's application](https://www.st.com/en/development-tools/stsw-stm32080.html) or install the Linux subsystem for Windows 10 and follow the linux instructions.
|
||||||
|
- Hold down the Pico's button while plugging it into USB (when overwriting Espruino's default firmware)
|
||||||
|
- Navigate to the same directory as your firmware.bin file for Circuitpython and run the following command: `sudo dfu-util -a 0 -s 0x08000000 -D firmware.bin` or use the ST utility on Windows.
|
||||||
|
- Restart the board.
|
||||||
|
|
||||||
|
|
||||||
|
To reinstall Espruino, follow the same steps with the latest Espruino Pico binary from espruino.com/binaries. This will reinstall the usual Espruino bootloader. You must un-short the BOOT0/BTN jumper to re-use the original Espruino Bootloader again. If you used a Pencil mark then you may need to use cleaning fluid and a small brush to totally clear out the graphite.
|
||||||
39
ports/stm32f4/boards/espruino_pico/board.c
Normal file
39
ports/stm32f4/boards/espruino_pico/board.c
Normal file
@ -0,0 +1,39 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "boards/board.h"
|
||||||
|
#include "mpconfigboard.h"
|
||||||
|
|
||||||
|
void board_init(void) {
|
||||||
|
}
|
||||||
|
|
||||||
|
bool board_requests_safe_mode(void) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
void reset_board(void) {
|
||||||
|
|
||||||
|
}
|
||||||
39
ports/stm32f4/boards/espruino_pico/mpconfigboard.h
Normal file
39
ports/stm32f4/boards/espruino_pico/mpconfigboard.h
Normal file
@ -0,0 +1,39 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
//Micropython setup
|
||||||
|
|
||||||
|
#define MICROPY_HW_BOARD_NAME "Espruino Pico"
|
||||||
|
#define MICROPY_HW_MCU_NAME "STM32F401xD"
|
||||||
|
|
||||||
|
#define FLASH_SIZE (0x60000)
|
||||||
|
#define FLASH_PAGE_SIZE (0x4000)
|
||||||
|
|
||||||
|
#define AUTORESET_DELAY_MS 500
|
||||||
|
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000)
|
||||||
|
|
||||||
|
#define BOARD_OSC_DIV 8
|
||||||
|
|
||||||
16
ports/stm32f4/boards/espruino_pico/mpconfigboard.mk
Normal file
16
ports/stm32f4/boards/espruino_pico/mpconfigboard.mk
Normal file
@ -0,0 +1,16 @@
|
|||||||
|
USB_VID = 0x239A
|
||||||
|
USB_PID = 0x808E
|
||||||
|
USB_PRODUCT = "Espruino Pico"
|
||||||
|
USB_MANUFACTURER = "Espruino"
|
||||||
|
USB_DEVICES = "CDC,MSC"
|
||||||
|
|
||||||
|
INTERNAL_FLASH_FILESYSTEM = 1
|
||||||
|
LONGINT_IMPL = NONE
|
||||||
|
|
||||||
|
MCU_SERIES = m4
|
||||||
|
MCU_VARIANT = stm32f4
|
||||||
|
MCU_SUB_VARIANT = stm32f401xe
|
||||||
|
MCU_PACKAGE = 48
|
||||||
|
CMSIS_MCU = STM32F401xE
|
||||||
|
LD_FILE = boards/STM32F401xd_fs.ld # use for internal flash
|
||||||
|
|
||||||
33
ports/stm32f4/boards/espruino_pico/pins.c
Normal file
33
ports/stm32f4/boards/espruino_pico/pins.c
Normal file
@ -0,0 +1,33 @@
|
|||||||
|
#include "shared-bindings/board/__init__.h"
|
||||||
|
|
||||||
|
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B15), MP_ROM_PTR(&pin_PB15) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B14), MP_ROM_PTR(&pin_PB14) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B13), MP_ROM_PTR(&pin_PB13) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B10), MP_ROM_PTR(&pin_PB10) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B1), MP_ROM_PTR(&pin_PB01) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA07) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA06) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA05) },
|
||||||
|
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B3), MP_ROM_PTR(&pin_PB03) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B4), MP_ROM_PTR(&pin_PB04) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B5), MP_ROM_PTR(&pin_PB05) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B6), MP_ROM_PTR(&pin_PB06) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B7), MP_ROM_PTR(&pin_PB07) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PA08) },
|
||||||
|
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA04) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA03) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA02) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA01) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA00) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PA10) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B9), MP_ROM_PTR(&pin_PB09) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_B8), MP_ROM_PTR(&pin_PB08) },
|
||||||
|
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_BTN), MP_ROM_PTR(&pin_PC13) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PB02) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PB12) },
|
||||||
|
};
|
||||||
|
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||||
440
ports/stm32f4/boards/espruino_pico/stm32f4xx_hal_conf.h
Normal file
440
ports/stm32f4/boards/espruino_pico/stm32f4xx_hal_conf.h
Normal file
@ -0,0 +1,440 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32f4xx_hal_conf_template.h
|
||||||
|
* @author MCD Application Team
|
||||||
|
* @brief HAL configuration template file.
|
||||||
|
* This file should be copied to the application folder and renamed
|
||||||
|
* to stm32f4xx_hal_conf.h.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __STM32F4xx_HAL_CONF_H
|
||||||
|
#define __STM32F4xx_HAL_CONF_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* ########################## Module Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief This is the list of modules to be used in the HAL driver
|
||||||
|
*/
|
||||||
|
#define HAL_MODULE_ENABLED
|
||||||
|
|
||||||
|
#define HAL_ADC_MODULE_ENABLED
|
||||||
|
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||||
|
/* #define HAL_CAN_MODULE_ENABLED */
|
||||||
|
/* #define HAL_CRC_MODULE_ENABLED */
|
||||||
|
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||||
|
#define HAL_DAC_MODULE_ENABLED
|
||||||
|
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||||
|
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||||
|
/* #define HAL_ETH_MODULE_ENABLED */
|
||||||
|
/* #define HAL_NAND_MODULE_ENABLED */
|
||||||
|
/* #define HAL_NOR_MODULE_ENABLED */
|
||||||
|
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||||
|
/* #define HAL_HASH_MODULE_ENABLED */
|
||||||
|
#define HAL_I2C_MODULE_ENABLED
|
||||||
|
#define HAL_I2S_MODULE_ENABLED
|
||||||
|
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||||
|
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||||
|
/* #define HAL_RNG_MODULE_ENABLED */
|
||||||
|
/* #define HAL_RTC_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SAI_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SD_MODULE_ENABLED */
|
||||||
|
/* #define HAL_MMC_MODULE_ENABLED */
|
||||||
|
#define HAL_SPI_MODULE_ENABLED
|
||||||
|
#define HAL_TIM_MODULE_ENABLED
|
||||||
|
#define HAL_UART_MODULE_ENABLED
|
||||||
|
#define HAL_USART_MODULE_ENABLED
|
||||||
|
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||||
|
#define HAL_PCD_MODULE_ENABLED
|
||||||
|
/* #define HAL_HCD_MODULE_ENABLED */
|
||||||
|
/* #define HAL_DSI_MODULE_ENABLED */
|
||||||
|
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||||
|
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||||
|
/* #define HAL_CEC_MODULE_ENABLED */
|
||||||
|
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||||
|
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||||
|
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||||
|
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||||
|
/* #define HAL_EXTI_MODULE_ENABLED */
|
||||||
|
#define HAL_GPIO_MODULE_ENABLED
|
||||||
|
#define HAL_EXTI_MODULE_ENABLED
|
||||||
|
#define HAL_DMA_MODULE_ENABLED
|
||||||
|
#define HAL_RCC_MODULE_ENABLED
|
||||||
|
#define HAL_FLASH_MODULE_ENABLED
|
||||||
|
#define HAL_PWR_MODULE_ENABLED
|
||||||
|
#define HAL_CORTEX_MODULE_ENABLED
|
||||||
|
|
||||||
|
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||||
|
/**
|
||||||
|
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSE is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#if !defined (HSE_VALUE)
|
||||||
|
#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
|
||||||
|
#endif /* HSE_VALUE */
|
||||||
|
|
||||||
|
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||||
|
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||||
|
#endif /* HSE_STARTUP_TIMEOUT */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal High Speed oscillator (HSI) value.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSI is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#if !defined (HSI_VALUE)
|
||||||
|
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||||
|
#endif /* HSI_VALUE */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal Low Speed oscillator (LSI) value.
|
||||||
|
*/
|
||||||
|
#if !defined (LSI_VALUE)
|
||||||
|
#define LSI_VALUE ((uint32_t)40000)
|
||||||
|
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||||
|
The real value may vary depending on the variations
|
||||||
|
in voltage and temperature. */
|
||||||
|
/**
|
||||||
|
* @brief External Low Speed oscillator (LSE) value.
|
||||||
|
*/
|
||||||
|
#if !defined (LSE_VALUE)
|
||||||
|
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
|
||||||
|
#endif /* LSE_VALUE */
|
||||||
|
|
||||||
|
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||||
|
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
||||||
|
#endif /* LSE_STARTUP_TIMEOUT */
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief External clock source for I2S peripheral
|
||||||
|
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||||
|
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||||
|
*/
|
||||||
|
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||||
|
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
|
||||||
|
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||||
|
|
||||||
|
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||||
|
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||||
|
|
||||||
|
/* ########################### System Configuration ######################### */
|
||||||
|
/**
|
||||||
|
* @brief This is the HAL system configuration section
|
||||||
|
*/
|
||||||
|
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
||||||
|
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
||||||
|
#define USE_RTOS 0U
|
||||||
|
#define PREFETCH_ENABLE 1U
|
||||||
|
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||||
|
#define DATA_CACHE_ENABLE 1U
|
||||||
|
|
||||||
|
/* ########################## Assert Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||||
|
* HAL drivers code
|
||||||
|
*/
|
||||||
|
/* #define USE_FULL_ASSERT 1U */
|
||||||
|
|
||||||
|
/* ################## Ethernet peripheral configuration ##################### */
|
||||||
|
|
||||||
|
/* Section 1 : Ethernet peripheral configuration */
|
||||||
|
|
||||||
|
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||||
|
#define MAC_ADDR0 2U
|
||||||
|
#define MAC_ADDR1 0U
|
||||||
|
#define MAC_ADDR2 0U
|
||||||
|
#define MAC_ADDR3 0U
|
||||||
|
#define MAC_ADDR4 0U
|
||||||
|
#define MAC_ADDR5 0U
|
||||||
|
|
||||||
|
/* Definition of the Ethernet driver buffers size and count */
|
||||||
|
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||||
|
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||||
|
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||||
|
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||||
|
|
||||||
|
/* Section 2: PHY configuration section */
|
||||||
|
|
||||||
|
/* DP83848_PHY_ADDRESS Address*/
|
||||||
|
#define DP83848_PHY_ADDRESS 0x01U
|
||||||
|
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||||
|
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
|
||||||
|
/* PHY Configuration delay */
|
||||||
|
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
|
||||||
|
|
||||||
|
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
|
||||||
|
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
|
||||||
|
|
||||||
|
/* Section 3: Common PHY Registers */
|
||||||
|
|
||||||
|
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
|
||||||
|
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
|
||||||
|
|
||||||
|
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
|
||||||
|
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
|
||||||
|
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||||
|
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||||
|
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||||
|
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||||
|
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
|
||||||
|
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
|
||||||
|
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
|
||||||
|
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
|
||||||
|
|
||||||
|
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
|
||||||
|
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
|
||||||
|
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
|
||||||
|
|
||||||
|
/* Section 4: Extended PHY Registers */
|
||||||
|
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||||
|
|
||||||
|
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||||
|
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||||
|
|
||||||
|
/* ################## SPI peripheral configuration ########################## */
|
||||||
|
|
||||||
|
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||||
|
* Activated: CRC code is present inside driver
|
||||||
|
* Deactivated: CRC code cleaned from driver
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define USE_SPI_CRC 0U
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
/**
|
||||||
|
* @brief Include module's header file
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef HAL_RCC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_rcc.h"
|
||||||
|
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_exti.h"
|
||||||
|
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_gpio.h"
|
||||||
|
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DMA_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dma.h"
|
||||||
|
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_cortex.h"
|
||||||
|
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_adc.h"
|
||||||
|
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_can.h"
|
||||||
|
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CRC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_crc.h"
|
||||||
|
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_cryp.h"
|
||||||
|
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dma2d.h"
|
||||||
|
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dac.h"
|
||||||
|
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dcmi.h"
|
||||||
|
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ETH_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_eth.h"
|
||||||
|
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_flash.h"
|
||||||
|
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_sram.h"
|
||||||
|
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_NOR_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_nor.h"
|
||||||
|
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_NAND_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_nand.h"
|
||||||
|
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_pccard.h"
|
||||||
|
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_sdram.h"
|
||||||
|
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_HASH_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_hash.h"
|
||||||
|
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_i2c.h"
|
||||||
|
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2S_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_i2s.h"
|
||||||
|
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_iwdg.h"
|
||||||
|
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_ltdc.h"
|
||||||
|
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PWR_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_pwr.h"
|
||||||
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RNG_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_rng.h"
|
||||||
|
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RTC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_rtc.h"
|
||||||
|
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SAI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_sai.h"
|
||||||
|
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_sd.h"
|
||||||
|
#endif /* HAL_SD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_MMC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_mmc.h"
|
||||||
|
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_spi.h"
|
||||||
|
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_tim.h"
|
||||||
|
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_uart.h"
|
||||||
|
#endif /* HAL_UART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_USART_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_usart.h"
|
||||||
|
#endif /* HAL_USART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_irda.h"
|
||||||
|
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_smartcard.h"
|
||||||
|
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_wwdg.h"
|
||||||
|
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_pcd.h"
|
||||||
|
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_HCD_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_hcd.h"
|
||||||
|
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DSI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dsi.h"
|
||||||
|
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_qspi.h"
|
||||||
|
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CEC_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_cec.h"
|
||||||
|
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_fmpi2c.h"
|
||||||
|
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_spdifrx.h"
|
||||||
|
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_dfsdm.h"
|
||||||
|
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||||
|
#include "stm32f4xx_hal_lptim.h"
|
||||||
|
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
/* Exported macro ------------------------------------------------------------*/
|
||||||
|
#ifdef USE_FULL_ASSERT
|
||||||
|
/**
|
||||||
|
* @brief The assert_param macro is used for function's parameters check.
|
||||||
|
* @param expr: If expr is false, it calls assert_failed function
|
||||||
|
* which reports the name of the source file and the source
|
||||||
|
* line number of the call that failed.
|
||||||
|
* If expr is true, it returns no value.
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||||
|
/* Exported functions ------------------------------------------------------- */
|
||||||
|
void assert_failed(uint8_t* file, uint32_t line);
|
||||||
|
#else
|
||||||
|
#define assert_param(expr) ((void)0U)
|
||||||
|
#endif /* USE_FULL_ASSERT */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||||
|
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -19,6 +19,6 @@ MCU_VARIANT = stm32f4
|
|||||||
MCU_SUB_VARIANT = stm32f401xe
|
MCU_SUB_VARIANT = stm32f401xe
|
||||||
MCU_PACKAGE = 64
|
MCU_PACKAGE = 64
|
||||||
CMSIS_MCU = STM32F401xE
|
CMSIS_MCU = STM32F401xE
|
||||||
LD_FILE = boards/STM32F401_boot.ld
|
LD_FILE = boards/STM32F401xe_boot.ld
|
||||||
# LD_FILE = boards/STM32F401_fs.ld # use for internal flash
|
# LD_FILE = boards/STM32F401xe_fs.ld # use for internal flash
|
||||||
|
|
||||||
|
|||||||
@ -25,6 +25,7 @@
|
|||||||
* THE SOFTWARE.
|
* THE SOFTWARE.
|
||||||
*/
|
*/
|
||||||
#include "stm32f4xx_hal.h"
|
#include "stm32f4xx_hal.h"
|
||||||
|
#include "py/mpconfig.h"
|
||||||
|
|
||||||
void stm32f4_peripherals_clocks_init(void) {
|
void stm32f4_peripherals_clocks_init(void) {
|
||||||
//System clock init
|
//System clock init
|
||||||
@ -44,7 +45,7 @@ void stm32f4_peripherals_clocks_init(void) {
|
|||||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||||
RCC_OscInitStruct.PLL.PLLM = 12;
|
RCC_OscInitStruct.PLL.PLLM = BOARD_OSC_DIV;
|
||||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
|
||||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||||
|
|||||||
@ -38,7 +38,6 @@ void stm32f4_peripherals_gpio_init(void) {
|
|||||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||||
|
|
||||||
//Never reset pins
|
//Never reset pins
|
||||||
never_reset_pin_number(2,13); //PC13 anti tamp
|
|
||||||
never_reset_pin_number(2,14); //PC14 OSC32_IN
|
never_reset_pin_number(2,14); //PC14 OSC32_IN
|
||||||
never_reset_pin_number(2,15); //PC15 OSC32_OUT
|
never_reset_pin_number(2,15); //PC15 OSC32_OUT
|
||||||
never_reset_pin_number(0,13); //PA13 SWDIO
|
never_reset_pin_number(0,13); //PA13 SWDIO
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user