diff --git a/ports/raspberrypi/boards/adafruit_macropad_rp2040/board.c b/ports/raspberrypi/boards/adafruit_macropad_rp2040/board.c
index 3fb4b21cbf..214662e331 100644
--- a/ports/raspberrypi/boards/adafruit_macropad_rp2040/board.c
+++ b/ports/raspberrypi/boards/adafruit_macropad_rp2040/board.c
@@ -24,13 +24,86 @@
  * THE SOFTWARE.
  */
 
-#include "supervisor/board.h"
-
+#include "shared-bindings/board/__init__.h"
+#include "shared-bindings/displayio/FourWire.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+#include "shared-bindings/busio/SPI.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "src/rp2_common/hardware_gpio/include/hardware/gpio.h"
 #include "supervisor/shared/board.h"
 
+displayio_fourwire_obj_t board_display_obj;
+
+#define DELAY 0x80
+
+uint8_t display_init_sequence[] = {
+    0xae, 0, // sleep
+    0xd5, 1, 0x80, // fOsc divide by 2
+    0xa8, 1, 0x3f, // multiplex 64
+    0xd3, 1, 0x00, // offset 0
+    0x40, 1, 0x00, // start line 0
+    0xad, 1, 0x8b, // dc/dc on
+    0xa1, 0, // segment remap = 0
+    0xc8, 0, // scan incr
+    0xda, 1, 0x12, // com pins
+    0x81, 1, 0xff, // contrast 255
+    0xd9, 1, 0x1f, // pre/dis-charge 2DCLKs/2CLKs
+    0xdb, 1, 0x20, // VCOM deslect 0.770
+    0x20, 1, 0x20,
+    0x33, 0, // VPP 9V
+    0xa6, 0, // not inverted
+    0xa4, 0, // normal
+    0xaf, 0, // on
+};
+
 void board_init(void) {
+    busio_spi_obj_t *spi = &displays[0].fourwire_bus.inline_bus;
+    common_hal_busio_spi_construct(spi, &pin_GPIO26, &pin_GPIO27, NULL);
+    common_hal_busio_spi_never_reset(spi);
+
+    displayio_fourwire_obj_t *bus = &displays[0].fourwire_bus;
+    bus->base.type = &displayio_fourwire_type;
+    common_hal_displayio_fourwire_construct(bus,
+        spi,
+        &pin_GPIO24, // Command or data
+        &pin_GPIO22, // Chip select
+        &pin_GPIO23, // Reset
+        1000000, // Baudrate
+        0, // Polarity
+        0); // Phase
+
+    displayio_display_obj_t *display = &displays[0].display;
+    display->base.type = &displayio_display_type;
+    common_hal_displayio_display_construct(display,
+        bus,
+        128, // Width
+        64, // Height
+        2, // column start
+        0, // row start
+        0, // rotation
+        1, // Color depth
+        true, // grayscale
+        false, // pixels in byte share row. Only used with depth < 8
+        1, // bytes per cell. Only valid for depths < 8
+        false, // reverse_pixels_in_byte. Only valid for depths < 8
+        true, // reverse_pixels_in_word
+        0, // Set column command
+        0, // Set row command
+        0, // Write memory command
+        0xd3, // set vertical scroll command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        NULL,
+        0x81,
+        1.0f, // brightness
+        false, // auto_brightness
+        true, // single_byte_bounds
+        true, // data as commands
+        true, // auto_refresh
+        60, // native_frames_per_second
+        true, // backlight_on_high
+        true); // SH1107_addressing
 }
 
 bool board_requests_safe_mode(void) {
diff --git a/ports/raspberrypi/boards/adafruit_macropad_rp2040/pins.c b/ports/raspberrypi/boards/adafruit_macropad_rp2040/pins.c
index bc57161ec5..17ff8d9a41 100644
--- a/ports/raspberrypi/boards/adafruit_macropad_rp2040/pins.c
+++ b/ports/raspberrypi/boards/adafruit_macropad_rp2040/pins.c
@@ -1,4 +1,5 @@
 #include "shared-bindings/board/__init__.h"
+#include "shared-module/displayio/__init__.h"
 
 STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_KEY1), MP_ROM_PTR(&pin_GPIO1) },
@@ -43,5 +44,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
 
     { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
     { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_i2c_obj) },
+
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)}
 };
 MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);