From 80ff1c49a60c5325c7d43ae50f6530fe3dde262b Mon Sep 17 00:00:00 2001 From: ladyada Date: Sun, 4 Feb 2018 23:00:23 -0500 Subject: [PATCH] pIRKey tested w/ hardware - basically a trinket or gemma with only dotstar LED + IR Receiver --- atmel-samd/boards/pirkey_m0/board.c | 38 ++++ atmel-samd/boards/pirkey_m0/conf_access.h | 115 ++++++++++ atmel-samd/boards/pirkey_m0/conf_board.h | 14 ++ atmel-samd/boards/pirkey_m0/conf_clocks.h | 1 + atmel-samd/boards/pirkey_m0/conf_usb.h | 220 +++++++++++++++++++ atmel-samd/boards/pirkey_m0/mpconfigboard.h | 18 ++ atmel-samd/boards/pirkey_m0/mpconfigboard.mk | 7 + atmel-samd/boards/pirkey_m0/pins.c | 9 + 8 files changed, 422 insertions(+) create mode 100644 atmel-samd/boards/pirkey_m0/board.c create mode 100644 atmel-samd/boards/pirkey_m0/conf_access.h create mode 100644 atmel-samd/boards/pirkey_m0/conf_board.h create mode 100644 atmel-samd/boards/pirkey_m0/conf_clocks.h create mode 100644 atmel-samd/boards/pirkey_m0/conf_usb.h create mode 100644 atmel-samd/boards/pirkey_m0/mpconfigboard.h create mode 100644 atmel-samd/boards/pirkey_m0/mpconfigboard.mk create mode 100644 atmel-samd/boards/pirkey_m0/pins.c diff --git a/atmel-samd/boards/pirkey_m0/board.c b/atmel-samd/boards/pirkey_m0/board.c new file mode 100644 index 0000000000..c8e20206a1 --- /dev/null +++ b/atmel-samd/boards/pirkey_m0/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) +{ +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/atmel-samd/boards/pirkey_m0/conf_access.h b/atmel-samd/boards/pirkey_m0/conf_access.h new file mode 100644 index 0000000000..25109b75ca --- /dev/null +++ b/atmel-samd/boards/pirkey_m0/conf_access.h @@ -0,0 +1,115 @@ +/** + * \file + * + * \brief Memory access control configuration file. + * + * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ +/* + * Support and FAQ: visit Atmel Support + */ + +#ifndef _CONF_ACCESS_H_ +#define _CONF_ACCESS_H_ + +#include "compiler.h" +#include "board.h" + + +/*! \name Activation of Logical Unit Numbers + */ +//! @{ +#define LUN_0 ENABLE //!< On-Chip Virtual Memory. +#define LUN_1 DISABLE //!< AT45DBX Data Flash. +#define LUN_2 DISABLE //!< SD/MMC Card over SPI. +#define LUN_3 DISABLE //!< SD/MMC Card over MCI Slot 0. +#define LUN_4 DISABLE +#define LUN_5 DISABLE +#define LUN_6 DISABLE +#define LUN_7 DISABLE +#define LUN_USB DISABLE //!< Host Mass-Storage Memory. +//! @} + +/*! \name LUN 0 Definitions + */ +//! @{ +#define LUN_0_INCLUDE "access_vfs.h" +#define Lun_0_test_unit_ready vfs_test_unit_ready +#define Lun_0_read_capacity vfs_read_capacity +#define Lun_0_unload NULL +#define Lun_0_wr_protect vfs_wr_protect +#define Lun_0_removal vfs_removal +#define Lun_0_usb_read_10 vfs_usb_read_10 +#define Lun_0_usb_write_10 vfs_usb_write_10 +#define LUN_0_NAME "\"MicroPython VFS[0]\"" +//! @} + +#define MEM_USB LUN_USB + +/*! \name Actions Associated with Memory Accesses + * + * Write here the action to associate with each memory access. + * + * \warning Be careful not to waste time in order not to disturb the functions. + */ +//! @{ +#define memory_start_read_action(nb_sectors) +#define memory_stop_read_action() +#define memory_start_write_action(nb_sectors) +#define memory_stop_write_action() +//! @} + +/*! \name Activation of Interface Features + */ +//! @{ +#define ACCESS_USB true //!< MEM <-> USB interface. +#define ACCESS_MEM_TO_RAM false //!< MEM <-> RAM interface. +#define ACCESS_STREAM false //!< Streaming MEM <-> MEM interface. +#define ACCESS_STREAM_RECORD false //!< Streaming MEM <-> MEM interface in record mode. +#define ACCESS_MEM_TO_MEM false //!< MEM <-> MEM interface. +#define ACCESS_CODEC false //!< Codec interface. +//! @} + +/*! \name Specific Options for Access Control + */ +//! @{ +#define GLOBAL_WR_PROTECT false //!< Management of a global write protection. +//! @} + + +#endif // _CONF_ACCESS_H_ diff --git a/atmel-samd/boards/pirkey_m0/conf_board.h b/atmel-samd/boards/pirkey_m0/conf_board.h new file mode 100644 index 0000000000..7b88c97fc2 --- /dev/null +++ b/atmel-samd/boards/pirkey_m0/conf_board.h @@ -0,0 +1,14 @@ +/** + * \file + * + * \brief User board configuration template + * + */ +/* + * Support and FAQ: visit Atmel Support + */ + +#ifndef CONF_BOARD_H +#define CONF_BOARD_H + +#endif // CONF_BOARD_H diff --git a/atmel-samd/boards/pirkey_m0/conf_clocks.h b/atmel-samd/boards/pirkey_m0/conf_clocks.h new file mode 100644 index 0000000000..9e4f7876be --- /dev/null +++ b/atmel-samd/boards/pirkey_m0/conf_clocks.h @@ -0,0 +1 @@ +#include "conf_clocks_crystalless.h" diff --git a/atmel-samd/boards/pirkey_m0/conf_usb.h b/atmel-samd/boards/pirkey_m0/conf_usb.h new file mode 100644 index 0000000000..caa086706d --- /dev/null +++ b/atmel-samd/boards/pirkey_m0/conf_usb.h @@ -0,0 +1,220 @@ + +#include +#include + +#include "asf/common/services/usb/class/cdc/usb_protocol_cdc.h" + +#ifndef CONF_USB_H_INCLUDED +#define CONF_USB_H_INCLUDED + +#define USB_DEVICE_MAJOR_VERSION 1 +#define USB_DEVICE_MINOR_VERSION 0 +#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA) +#define USB_DEVICE_ATTR \ + (USB_CONFIG_ATTR_BUS_POWERED) +// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED) +// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED) + +//! USB Device string definitions (Optional) +#ifndef USB_DEVICE_MANUFACTURE_NAME +# define USB_DEVICE_MANUFACTURE_NAME "Adafruit Industries" +#endif + +#ifndef USB_DEVICE_PRODUCT_NAME +# define USB_DEVICE_PRODUCT_NAME "pIRKey M0" +#endif + +#define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number +#define USB_DEVICE_GET_SERIAL_NAME_LENGTH 32 +extern char serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH]; + +//! Control endpoint size +#define USB_DEVICE_EP_CTRL_SIZE 64 + +//! Interfaces for this device (CDC COM + CDC DATA + MSC + HID mouse + HID kbd) +#define USB_DEVICE_NB_INTERFACE 5 + +// (3 | USB_EP_DIR_IN) // CDC Notify endpoint +// (4 | USB_EP_DIR_IN) // CDC TX +// (5 | USB_EP_DIR_OUT) // CDC RX +// (1 | USB_EP_DIR_IN) // MSC IN +// (2 | USB_EP_DIR_OUT) // MSC OUT +// (6 | USB_EP_DIR_IN) // HID mouse report +// (7 | USB_EP_DIR_IN) // HID keyboard report +#define USB_DEVICE_MAX_EP 7 + +#define UDI_CDC_PORT_NB 1 +#define UDI_CDC_ENABLE_EXT(port) mp_cdc_enable(port) +extern bool mp_cdc_enable(uint8_t port); +#define UDI_CDC_DISABLE_EXT(port) mp_cdc_disable(port) +extern void mp_cdc_disable(uint8_t port); +#define UDI_CDC_LOW_RATE + +#define UDI_CDC_DEFAULT_RATE 115200 +#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1 +#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE +#define UDI_CDC_DEFAULT_DATABITS 8 + +#define UDI_CDC_RX_NOTIFY(port) usb_rx_notify() +void usb_rx_notify(void); +#define UDI_CDC_SET_CODING_EXT(port,cfg) usb_coding_notify(port, cfg) +void usb_coding_notify(uint8_t port, usb_cdc_line_coding_t* coding); +#define UDI_CDC_SET_DTR_EXT(port,set) usb_dtr_notify(port, set) +void usb_dtr_notify(uint8_t port, bool set); +#define UDI_CDC_SET_RTS_EXT(port,set) usb_rts_notify(port, set) +void usb_rts_notify(uint8_t port, bool set); + +/** + * USB CDC low level configuration + * In standalone these configurations are defined by the CDC module. + * For composite device, these configuration must be defined here + * @{ + */ +//! Endpoint numbers definition + +#define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint +#define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX +#define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT) // RX + +//! Interface numbers +#define UDI_CDC_COMM_IFACE_NUMBER_0 0 +#define UDI_CDC_DATA_IFACE_NUMBER_0 1 + +/** + * Configuration of MSC interface + * @{ + */ +//! Vendor name and Product version of MSC interface +#define UDI_MSC_GLOBAL_VENDOR_ID \ + 'A', 'T', 'M', 'E', 'L', ' ', ' ', ' ' +#define UDI_MSC_GLOBAL_PRODUCT_VERSION \ + '1', '.', '0', '0' + +//! Interface callback definition +#define UDI_MSC_ENABLE_EXT() mp_msc_enable() +extern bool mp_msc_enable(void); +#define UDI_MSC_DISABLE_EXT() mp_msc_disable() +extern void mp_msc_disable(void); + +//! Enable id string of interface to add an extra USB string +#define UDI_MSC_STRING_ID 5 + +/** + * USB MSC low level configuration + * In standalone these configurations are defined by the MSC module. + * For composite device, these configuration must be defined here + * @{ + */ +//! Endpoint numbers definition +#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN) +#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT) + +//! Interface number +#define UDI_MSC_IFACE_NUMBER 2 +/** + * Configuration of HID Mouse interface + * @{ + */ +//! Interface callback definition +#define UDI_HID_MOUSE_ENABLE_EXT() mp_mouse_enable() +extern bool mp_mouse_enable(void); +#define UDI_HID_MOUSE_DISABLE_EXT() mp_mouse_disable() +extern void mp_mouse_disable(void); + +//! Enable id string of interface to add an extra USB string +#define UDI_HID_MOUSE_STRING_ID 6 + +/** + * USB HID Mouse low level configuration + * In standalone these configurations are defined by the HID Mouse module. + * For composite device, these configuration must be defined here + * @{ + */ +//! Endpoint numbers definition +#define UDI_HID_MOUSE_EP_IN (6 | USB_EP_DIR_IN) + +//! Interface number +#define UDI_HID_MOUSE_IFACE_NUMBER 3 +//@} +//@} + +/** + * Configuration of HID Keyboard interface + * @{ + */ +//! Interface callback definition +#define UDI_HID_KBD_ENABLE_EXT() mp_keyboard_enable() +extern bool mp_keyboard_enable(void); +#define UDI_HID_KBD_DISABLE_EXT() mp_keyboard_disable() +extern void mp_keyboard_disable(void); +#define UDI_HID_KBD_CHANGE_LED(value) mp_keyboard_led(value) +extern void mp_keyboard_led(uint8_t); + +//! Enable id string of interface to add an extra USB string +#define UDI_HID_KBD_STRING_ID 7 + +/** + * USB HID Keyboard low level configuration + * In standalone these configurations are defined by the HID Keyboard module. + * For composite device, these configuration must be defined here + * @{ + */ +//! Endpoint numbers definition +#define UDI_HID_KBD_EP_IN (7 | USB_EP_DIR_IN) + +//! Interface number +#define UDI_HID_KBD_IFACE_NUMBER 4 + +/** + * Description of Composite Device + * @{ + */ +//! USB Interfaces descriptor structure +#define UDI_COMPOSITE_DESC_T \ + usb_iad_desc_t udi_cdc_iad; \ + udi_cdc_comm_desc_t udi_cdc_comm; \ + udi_cdc_data_desc_t udi_cdc_data; \ + udi_msc_desc_t udi_msc; \ + udi_hid_mouse_desc_t udi_hid_mouse; \ + udi_hid_kbd_desc_t udi_hid_kbd + +//! USB Interfaces descriptor value for Full Speed +#define UDI_COMPOSITE_DESC_FS \ + .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ + .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ + .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \ + .udi_msc = UDI_MSC_DESC_FS, \ + .udi_hid_mouse = UDI_HID_MOUSE_DESC, \ + .udi_hid_kbd = UDI_HID_KBD_DESC + +//! USB Interfaces descriptor value for High Speed +#define UDI_COMPOSITE_DESC_HS \ + .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \ + .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \ + .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \ + .udi_msc = UDI_MSC_DESC_HS, \ + .udi_hid_mouse = UDI_HID_MOUSE_DESC, \ + .udi_hid_kbd = UDI_HID_KBD_DESC + +//! USB Interface APIs +#define UDI_COMPOSITE_API \ + &udi_api_cdc_comm, \ + &udi_api_cdc_data, \ + &udi_api_msc, \ + &udi_api_hid_mouse, \ + &udi_api_hid_kbd +//@} + +/** + * USB Device Driver Configuration + * @{ + */ +//@} + +//! The includes of classes and other headers must be done at the end of this file to avoid compile error +#include "udi_cdc.h" +#include "udi_msc.h" +#include "udi_hid_mouse.h" +#include "udi_hid_kbd.h" + +#endif diff --git a/atmel-samd/boards/pirkey_m0/mpconfigboard.h b/atmel-samd/boards/pirkey_m0/mpconfigboard.h new file mode 100644 index 0000000000..3ce4003df5 --- /dev/null +++ b/atmel-samd/boards/pirkey_m0/mpconfigboard.h @@ -0,0 +1,18 @@ +#define USB_REPL + +#define MICROPY_HW_BOARD_NAME "Adafruit pIRKey M0" +#define MICROPY_HW_MCU_NAME "samd21e18" + +#define MICROPY_HW_APA102_MOSI (&pin_PA00) +#define MICROPY_HW_APA102_SCK (&pin_PA01) + +// #define CIRCUITPY_BITBANG_APA102 + +#define MICROPY_PORT_A (PORT_PA00 | PORT_PA01 | PORT_PA24 | PORT_PA25) +#define MICROPY_PORT_B (0) + +#define CIRCUITPY_INTERNAL_NVM_SIZE 0 + +#include "internal_flash.h" + +#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000) diff --git a/atmel-samd/boards/pirkey_m0/mpconfigboard.mk b/atmel-samd/boards/pirkey_m0/mpconfigboard.mk new file mode 100644 index 0000000000..12c1c6c923 --- /dev/null +++ b/atmel-samd/boards/pirkey_m0/mpconfigboard.mk @@ -0,0 +1,7 @@ +LD_FILE = boards/samd21x18-bootloader.ld +USB_VID = 0x239A +USB_PID = 0x8028 + +INTERNAL_FLASH_FILESYSTEM = 1 + +CHIP_VARIANT = SAMD21E18A diff --git a/atmel-samd/boards/pirkey_m0/pins.c b/atmel-samd/boards/pirkey_m0/pins.c new file mode 100644 index 0000000000..a1b7db85c8 --- /dev/null +++ b/atmel-samd/boards/pirkey_m0/pins.c @@ -0,0 +1,9 @@ +#include "samd21_pins.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_REMOTEIN), MP_ROM_PTR(&pin_PA28) }, + + { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_PA01) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);