Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice

lib/tinyusb

@@ -1 +1 @@
-Subproject commit 96d96a94b887bc1b648a175c28b377dba76a9068
+Subproject commit 00c440cb26fbea7fd367623454d8b67855f1372f

locale/ID.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -330,6 +330,14 @@ msgstr ""
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -520,6 +528,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr ""
@@ -968,6 +980,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr "Tidak ada dukungan hardware untuk pin"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr ""
@@ -1317,9 +1333,6 @@ msgid "Unsupported pull value."
 msgstr ""
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/circuitpython.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -326,6 +326,14 @@ msgstr ""
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -509,6 +517,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr ""
@@ -953,6 +965,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr ""
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr ""
@@ -1293,9 +1309,6 @@ msgid "Unsupported pull value."
 msgstr ""
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/de_DE.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Pascal Deneaux\n"
 "Language-Team: Sebastian Plamauer, Pascal Deneaux\n"
@@ -330,6 +330,14 @@ msgstr "Die Helligkeit ist nicht einstellbar"
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr "Der Puffergröße ist inkorrekt. Sie sollte %d bytes haben."
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -513,6 +521,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr "Die Zielkapazität ist kleiner als destination_length."
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr "Die Rotation der Anzeige muss in 90-Grad-Schritten erfolgen"
@@ -966,6 +978,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr "Keine Hardwareunterstützung an diesem Pin"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr "Kein Speicherplatz auf Gerät"
@@ -1324,9 +1340,6 @@ msgid "Unsupported pull value."
 msgstr "Nicht unterstützter Pull-Wert"
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/en_US.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -326,6 +326,14 @@ msgstr ""
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -509,6 +517,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr ""
@@ -953,6 +965,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr ""
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr ""
@@ -1293,9 +1309,6 @@ msgid "Unsupported pull value."
 msgstr ""
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/en_x_pirate.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: @sommersoft, @MrCertainly\n"
@@ -330,6 +330,14 @@ msgstr ""
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -513,6 +521,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr ""
@@ -957,6 +969,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr ""
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr ""
@@ -1297,9 +1313,6 @@ msgid "Unsupported pull value."
 msgstr ""
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/es.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -334,6 +334,14 @@ msgstr "El brillo no se puede ajustar"
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr "Tamaño de buffer incorrecto. Debe ser de %d bytes."
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -517,6 +525,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr "Capacidad de destino es mas pequeña que destination_length."
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr "Rotación de display debe ser en incrementos de 90 grados"
@@ -968,6 +980,10 @@ msgstr "Sin soporte de hardware en el pin clk"
 msgid "No hardware support on pin"
 msgstr "Sin soporte de hardware en pin"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr "No queda espacio en el dispositivo"
@@ -1334,9 +1350,6 @@ msgid "Unsupported pull value."
 msgstr "valor pull no soportado."
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/fil.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -332,6 +332,14 @@ msgstr ""
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr "Mali ang size ng buffer. Dapat %d bytes."
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -521,6 +529,10 @@ msgid "Destination capacity is smaller than destination_length."
 msgstr ""
 "Ang kapasidad ng destinasyon ay mas maliit kaysa sa destination_length."
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr ""
@@ -977,6 +989,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr "Walang support sa hardware ang pin"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr ""
@@ -1338,9 +1354,6 @@ msgid "Unsupported pull value."
 msgstr "Hindi suportado ang pull value."
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/fr.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2019-04-14 20:05+0100\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -337,6 +337,14 @@ msgstr "Luminosité non-ajustable"
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr "Tampon de taille incorrect. Devrait être de %d octets."
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -525,6 +533,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr "La capacité de destination est plus petite que 'destination_length'."
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr "La rotation d'affichage doit se faire par incréments de 90 degrés"
@@ -986,6 +998,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr "Pas de support matériel pour cette broche"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr "Il n'y a plus d'espace libre sur le périphérique"
@@ -1363,9 +1379,6 @@ msgid "Unsupported pull value."
 msgstr "Valeur de tirage 'pull' non supportée."
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/it_IT.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -332,6 +332,14 @@ msgstr "Illiminazione non è regolabile"
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr "Buffer di lunghezza non valida. Dovrebbe essere di %d bytes."
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -521,6 +529,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr "La capacità di destinazione è più piccola di destination_length."
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr ""
@@ -976,6 +988,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr "Nessun supporto hardware sul pin"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr "Non che spazio sul dispositivo"
@@ -1337,9 +1353,6 @@ msgid "Unsupported pull value."
 msgstr "Valore di pull non supportato."
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/pl.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@@ -329,6 +329,14 @@ msgstr "Jasność nie jest regulowana"
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr "Zła wielkość bufora. Powinno być %d bajtów."
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -512,6 +520,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr "Pojemność celu mniejsza od destination_length."
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr "Wyświetlacz można obracać co 90 stopni"
@@ -963,6 +975,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr "Brak sprzętowej obsługi na nóżce"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr "Brak miejsca"
@@ -1313,9 +1329,6 @@ msgid "Unsupported pull value."
 msgstr "Zła wartość podciągnięcia."
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/pt_BR.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -329,6 +329,14 @@ msgstr ""
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr "Buffer de tamanho incorreto. Deve ser %d bytes."
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -516,6 +524,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr ""
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr ""
@@ -968,6 +980,10 @@ msgstr "Sem suporte de hardware no pino de clock"
 msgid "No hardware support on pin"
 msgstr "Nenhum suporte de hardware no pino"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr ""
@@ -1314,9 +1330,6 @@ msgid "Unsupported pull value."
 msgstr ""
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

locale/zh_Latn_pinyin.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-08-19 21:38-0500\n"
+"POT-Creation-Date: 2019-08-22 15:20-0400\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -330,6 +330,14 @@ msgstr "Liàngdù wúfǎ tiáozhěng"
 msgid "Buffer incorrect size. Should be %d bytes."
 msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè. Yīnggāi shì %d zì jié."
 
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is not a bytearray."
+msgstr ""
+
+#: shared-bindings/displayio/Display.c
+msgid "Buffer is too small"
+msgstr ""
+
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
@@ -513,6 +521,10 @@ msgstr ""
 msgid "Destination capacity is smaller than destination_length."
 msgstr "Mùbiāo róngliàng xiǎoyú mùdì de_chángdù."
 
+#: shared-bindings/displayio/Display.c
+msgid "Display must have a 16 bit colorspace."
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display rotation must be in 90 degree increments"
 msgstr "Xiǎnshì xuánzhuǎn bìxū 90 dù jiā xīn"
@@ -963,6 +975,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr "Méiyǒu zài yǐn jiǎo shàng de yìngjiàn zhīchí"
 
+#: shared-module/touchio/TouchIn.c
+msgid "No pulldown on pin; 1Mohm recommended"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "No space left on device"
 msgstr "Shèbèi shàng méiyǒu kònggé"
@@ -1320,9 +1336,6 @@ msgid "Unsupported pull value."
 msgstr "Bù zhīchí de lādòng zhí."
 
 #: ports/nrf/common-hal/bleio/Characteristic.c
-msgid "Value length  required fixed length"
-msgstr ""
-
 #: ports/nrf/common-hal/bleio/Descriptor.c
 msgid "Value length != required fixed length"
 msgstr ""

ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.mk

@@ -14,5 +14,3 @@ LONGINT_IMPL = MPZ
 
 # No I2S on SAMD51G
 CIRCUITPY_AUDIOBUSIO = 0
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/cp32-m4/mpconfigboard.mk

@@ -14,5 +14,3 @@ EXTERNAL_FLASH_DEVICES = "W25Q128JV_PM"
 CIRCUITPY_PS2IO = 1
 # No I2S on SAMD51G.
 CIRCUITPY_AUDIOBUSIO = 0
-# No touch on SAMD51 yet.
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/datalore_ip_m4/mpconfigboard.mk

@@ -15,5 +15,3 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_NETWORK = 1
 MICROPY_PY_WIZNET5K = 5500
 CIRCUITPY_PS2IO = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/feather_m4_express/mpconfigboard.mk

@@ -15,5 +15,3 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_NETWORK = 1
 MICROPY_PY_WIZNET5K = 5500
 CIRCUITPY_PS2IO = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/grandcentral_m4_express/mpconfigboard.mk

@@ -13,5 +13,3 @@ EXTERNAL_FLASH_DEVICES = "W25Q64JV_IQ, GD25Q64C"
 LONGINT_IMPL = MPZ
 
 CIRCUITPY_PS2IO = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/itsybitsy_m0_express/mpconfigboard.mk

@@ -14,3 +14,6 @@ LONGINT_IMPL = MPZ
 
 CFLAGS_INLINE_LIMIT = 60
 SUPEROPT_GC = 0
+
+CIRCUITPY_I2CSLAVE = 0
+CIRCUITPY_RTC = 0

ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.mk

@@ -15,5 +15,3 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_PS2IO = 1
 # No I2S on SAMD51G
 CIRCUITPY_AUDIOBUSIO = 0
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk

@@ -11,8 +11,6 @@ QSPI_FLASH_FILESYSTEM = 0
 INTERNAL_FLASH_FILESYSTEM = 1
 LONGINT_IMPL = MPZ
 
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0
 # Not needed.
 CIRCUITPY_AUDIOBUSIO = 0
 CIRCUITPY_DISPLAYIO = 0

ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk

@@ -15,5 +15,3 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_NETWORK = 1
 MICROPY_PY_WIZNET5K = 5500
 CIRCUITPY_PS2IO = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/metro_m4_express/mpconfigboard.mk

@@ -15,5 +15,3 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_NETWORK = 1
 MICROPY_PY_WIZNET5K = 5500
 CIRCUITPY_PS2IO = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk

@@ -15,5 +15,3 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_PS2IO = 1
 # No I2S on SAMD51G
 CIRCUITPY_AUDIOBUSIO = 0
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/pybadge/mpconfigboard.mk

@@ -17,7 +17,5 @@ CIRCUITPY_DISPLAYIO = 1
 CIRCUITPY_GAMEPAD = 1
 CIRCUITPY_GAMEPADSHIFT = 1
 CIRCUITPY_STAGE = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0
 
 FROZEN_MPY_DIRS += $(TOP)/frozen/circuitpython-stage/pybadge

ports/atmel-samd/boards/pybadge_airlift/mpconfigboard.mk

@@ -17,7 +17,5 @@ CIRCUITPY_DISPLAYIO = 1
 CIRCUITPY_GAMEPAD = 1
 CIRCUITPY_GAMEPADSHIFT = 1
 CIRCUITPY_STAGE = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0
 
 FROZEN_MPY_DIRS += $(TOP)/frozen/circuitpython-stage/pybadge

ports/atmel-samd/boards/pygamer/mpconfigboard.mk

@@ -17,7 +17,5 @@ CIRCUITPY_DISPLAYIO = 1
 CIRCUITPY_GAMEPAD = 1
 CIRCUITPY_GAMEPADSHIFT = 1
 CIRCUITPY_STAGE = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0
 
 FROZEN_MPY_DIRS += $(TOP)/frozen/circuitpython-stage/pygamer

ports/atmel-samd/boards/pygamer_advance/mpconfigboard.mk

@@ -17,7 +17,5 @@ CIRCUITPY_DISPLAYIO = 1
 CIRCUITPY_GAMEPAD = 1
 CIRCUITPY_GAMEPADSHIFT = 1
 CIRCUITPY_STAGE = 1
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0
 
 FROZEN_MPY_DIRS += $(TOP)/frozen/circuitpython-stage/pybadge

ports/atmel-samd/boards/pyportal/mpconfigboard.mk

@@ -11,6 +11,3 @@ QSPI_FLASH_FILESYSTEM = 1
 EXTERNAL_FLASH_DEVICE_COUNT = 2
 EXTERNAL_FLASH_DEVICES = "W25Q64JV_IQ, GD25Q64C"
 LONGINT_IMPL = MPZ
-
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/pyportal_titano/mpconfigboard.mk

@@ -11,6 +11,3 @@ QSPI_FLASH_FILESYSTEM = 1
 EXTERNAL_FLASH_DEVICE_COUNT = 2
 EXTERNAL_FLASH_DEVICES = "W25Q64JV_IQ, GD25Q64C"
 LONGINT_IMPL = MPZ
-
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/robohatmm1_m4/mpconfigboard.mk

@@ -17,8 +17,6 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_PS2IO = 1
 # No I2S on SAMD51G
 CIRCUITPY_AUDIOBUSIO = 0
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0
 # Make room for more stuff
 CIRCUITPY_DISPLAYIO = 0
 CIRCUITPY_FREQUENCYIO = 0
@@ -28,4 +26,3 @@ FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
 #FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_INA219
 #FROZEN_MPY_DIRS += $(TOP)/frozen/RoboticsMasters_CircuitPython_MPU9250
-

ports/atmel-samd/boards/sam32/mpconfigboard.mk

@@ -9,6 +9,3 @@ CHIP_FAMILY = samd51
 
 INTERNAL_FLASH_FILESYSTEM = 1
 LONGINT_IMPL = MPZ
-
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/boards/trellis_m4_express/mpconfigboard.mk

@@ -15,5 +15,3 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_PS2IO = 1
 # No I2S on SAMD51G
 CIRCUITPY_AUDIOBUSIO = 0
-# No touch on SAMD51 yet
-CIRCUITPY_TOUCHIO = 0

ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c

@@ -35,7 +35,7 @@
 
 void common_hal_rotaryio_incrementalencoder_construct(rotaryio_incrementalencoder_obj_t* self,
     const mcu_pin_obj_t* pin_a, const mcu_pin_obj_t* pin_b) {
-    if (!pin_a->has_extint || !pin_a->has_extint) {
+    if (!pin_a->has_extint || !pin_b->has_extint) {
         mp_raise_RuntimeError(translate("Both pins must support hardware interrupts"));
     }
 

ports/atmel-samd/common-hal/touchio/TouchIn.c

@@ -34,9 +34,10 @@
 #include "shared-bindings/touchio/TouchIn.h"
 #include "supervisor/shared/translate.h"
 
+// Native touchio only exists for SAMD21
 #ifdef SAMD21
+
 #include "hpl/pm/hpl_pm_base.h"
-#endif
 
 #include "samd/clocks.h"
 #include "samd/pins.h"
@@ -65,7 +66,6 @@ void common_hal_touchio_touchin_construct(touchio_touchin_obj_t* self,
     claim_pin(pin);
 
     // Turn on the PTC if its not in use. We won't turn it off until reset.
-    #ifdef SAMD21
     if ((( Ptc *) PTC)->CTRLA.bit.ENABLE == 0) {
         // We run the PTC at 8mhz so divide the 48mhz clock by 6.
         uint8_t gclk = find_free_gclk(6);
@@ -94,7 +94,6 @@ void common_hal_touchio_touchin_construct(touchio_touchin_obj_t* self,
     // but for touches using fruit or other objects, the difference is much less.
 
     self->threshold = get_raw_reading(self) + 100;
-    #endif
 }
 
 bool common_hal_touchio_touchin_deinited(touchio_touchin_obj_t* self) {
@@ -139,3 +138,5 @@ uint16_t common_hal_touchio_touchin_get_threshold(touchio_touchin_obj_t *self) {
 void common_hal_touchio_touchin_set_threshold(touchio_touchin_obj_t *self, uint16_t new_threshold) {
     self->threshold = new_threshold;
 }
+
+#endif // SAMD21

ports/atmel-samd/common-hal/touchio/TouchIn.h

@@ -27,6 +27,9 @@
 #ifndef MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_TOUCHIO_TOUCHIN_H
 #define MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_TOUCHIO_TOUCHIN_H
 
+// Native touchio only exists for SAMD21
+#ifdef SAMD21
+
 #include "common-hal/microcontroller/Pin.h"
 
 #include "samd21_ptc_component.h"
@@ -42,4 +45,6 @@ typedef struct {
 
 void touchin_reset(void);
 
+#endif // SAMD21
+
 #endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_TOUCHIO_TOUCHIN_H

ports/atmel-samd/mpconfigport.mk

@@ -18,11 +18,13 @@ endif
 ifeq ($(CHIP_FAMILY),samd21)
 # frequencyio not yet verified as working on SAMD21.
 CIRCUITPY_FREQUENCYIO = 0
+CIRCUITPY_TOUCHIO_USE_NATIVE = 1
 endif
 
 # Put samd51-only choices here.
 ifeq ($(CHIP_FAMILY),samd51)
 CIRCUITPY_SAMD = 1
+CIRCUITPY_TOUCHIO_USE_NATIVE = 0
 endif
 
 INTERNAL_LIBM = 1

ports/atmel-samd/supervisor/port.c

@@ -54,7 +54,11 @@
 #include "common-hal/pulseio/PWMOut.h"
 #include "common-hal/ps2io/Ps2.h"
 #include "common-hal/rtc/RTC.h"
+
+#if CIRCUITPY_TOUCHIO_USE_NATIVE
 #include "common-hal/touchio/TouchIn.h"
+#endif
+
 #include "samd/cache.h"
 #include "samd/clocks.h"
 #include "samd/events.h"
@@ -211,7 +215,7 @@ void reset_port(void) {
     //pdmin_reset();
 #endif
 
-#if CIRCUITPY_TOUCHIO
+#if CIRCUITPY_TOUCHIO && CIRCUITPY_TOUCHIO_USE_NATIVE
     touchin_reset();
 #endif
     eic_reset();

ports/nrf/Makefile

@@ -184,8 +184,7 @@ SRC_C += \
 # USB source files for nrf52840
 ifeq ($(MCU_SUB_VARIANT),nrf52840)
 SRC_C += \
-	lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c \
+	lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c
-	lib/tinyusb/src/portable/nordic/nrf5x/hal_nrf5x.c
 endif
 
 SRC_COMMON_HAL_EXPANDED = $(addprefix shared-bindings/, $(SRC_COMMON_HAL)) \

ports/nrf/boards/circuitplayground_bluefruit/mpconfigboard.h

@@ -34,10 +34,11 @@
 #define FLASH_SIZE                  (0x100000)
 #define FLASH_PAGE_SIZE             (4096)
 
-#define MICROPY_HW_NEOPIXEL         (&pin_P0_13)
-
 #define MICROPY_HW_LED_STATUS       (&pin_P1_14)
 
+// Unusually, board does not have a 32 kHz xtal. Nearly all boards do.
+#define BOARD_HAS_32KHZ_XTAL (0)
+
 #if QSPI_FLASH_FILESYSTEM
 #define MICROPY_QSPI_DATA0                NRF_GPIO_PIN_MAP(0, 21)
 #define MICROPY_QSPI_DATA1                NRF_GPIO_PIN_MAP(0, 23)
@@ -60,8 +61,6 @@
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 
-#define BOARD_HAS_CRYSTAL 1
-
 #define DEFAULT_I2C_BUS_SCL         (&pin_P0_04)
 #define DEFAULT_I2C_BUS_SDA         (&pin_P0_05)
 

ports/nrf/common-hal/bleio/Adapter.c

@@ -47,8 +47,17 @@ STATIC void softdevice_assert_handler(uint32_t id, uint32_t pc, uint32_t info) {
 
 STATIC uint32_t ble_stack_enable(void) {
     nrf_clock_lf_cfg_t clock_config = {
+#if BOARD_HAS_32KHZ_XTAL
         .source       = NRF_CLOCK_LF_SRC_XTAL,
-        .accuracy = NRF_CLOCK_LF_ACCURACY_20_PPM
+        .rc_ctiv      = 0,
+        .rc_temp_ctiv = 0,
+        .accuracy     = NRF_CLOCK_LF_ACCURACY_20_PPM,
+#else
+        .source       = NRF_CLOCK_LF_SRC_RC,
+        .rc_ctiv      = 16,
+        .rc_temp_ctiv = 2,
+        .accuracy     = NRF_CLOCK_LF_ACCURACY_250_PPM,
+#endif
     };
 
     uint32_t err_code = sd_softdevice_enable(&clock_config, softdevice_assert_handler);

ports/nrf/common-hal/bleio/Characteristic.c

@@ -183,7 +183,7 @@ void common_hal_bleio_characteristic_set_value(bleio_characteristic_obj_t *self,
                                          (self->props & CHAR_PROP_WRITE_NO_RESPONSE));
         } else {
             if (self->fixed_length && bufinfo->len != self->max_length) {
-                mp_raise_ValueError(translate("Value length  required fixed length"));
+                mp_raise_ValueError(translate("Value length != required fixed length"));
             }
             if (bufinfo->len > self->max_length) {
                 mp_raise_ValueError(translate("Value length > max_length"));

ports/nrf/mpconfigport.h

@@ -53,6 +53,11 @@
 
 #include "py/circuitpy_mpconfig.h"
 
+#ifndef BOARD_HAS_32KHZ_XTAL
+// Assume crystal is present, which is the most common case.
+#define BOARD_HAS_32KHZ_XTAL (1)
+#endif
+
 #define MICROPY_PORT_ROOT_POINTERS \
     CIRCUITPY_COMMON_ROOT_POINTERS \
     ble_drv_evt_handler_entry_t* ble_drv_evt_handler_entries; \

ports/nrf/peripherals/nrf/clocks.c

@@ -26,11 +26,15 @@
  */
 
 #include "nrfx.h"
+#include "mpconfigport.h"
 
 void nrf_peripherals_clocks_init(void) {
-    // Set low-frequency clock source to be crystal. If there's a crystalless board, this will need to be
+
-    // generalized.
+#if BOARD_HAS_32KHZ_XTAL
     NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk);
+#else
+    NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_RC << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk);
+#endif
     NRF_CLOCK->TASKS_LFCLKSTART = 1UL;
 
     // Wait for clocks to start.

py/circuitpy_defns.mk

@@ -217,9 +217,8 @@ ifeq ($(CIRCUITPY_PEW),1)
 SRC_PATTERNS += _pew/%
 endif
 
-# All possible sources are listed here, and are filtered by SRC_PATTERNS.
+# All possible sources are listed here, and are filtered by SRC_PATTERNS in SRC_COMMON_HAL
-SRC_COMMON_HAL = \
+SRC_COMMON_HAL_ALL = \
-$(filter $(SRC_PATTERNS), \
 	analogio/AnalogIn.c \
 	analogio/AnalogOut.c \
 	analogio/__init__.c \
@@ -272,10 +271,9 @@ $(filter $(SRC_PATTERNS), \
 	rtc/__init__.c \
 	supervisor/Runtime.c \
 	supervisor/__init__.c \
-	time/__init__.c \
+	time/__init__.c
-	touchio/TouchIn.c \
+
-	touchio/__init__.c \
+SRC_COMMON_HAL = $(filter $(SRC_PATTERNS), $(SRC_COMMON_HAL_ALL))
-)
 
 # These don't have corresponding files in each port but are still located in
 # shared-bindings to make it clear what the contents of the modules are.
@@ -298,9 +296,7 @@ SRC_BINDINGS_ENUMS += \
 	help.c \
 	util.c
 
-# All possible sources are listed here, and are filtered by SRC_PATTERNS.
+SRC_SHARED_MODULE_ALL = \
-SRC_SHARED_MODULE = \
-$(filter $(SRC_PATTERNS), \
 	_pixelbuf/PixelBuf.c \
 	_pixelbuf/__init__.c \
 	_stage/Layer.c \
@@ -350,8 +346,23 @@ $(filter $(SRC_PATTERNS), \
 	uheap/__init__.c \
 	ustack/__init__.c \
 	_pew/__init__.c \
-	_pew/PewPew.c \
+	_pew/PewPew.c
-)
+
+# All possible sources are listed here, and are filtered by SRC_PATTERNS.
+SRC_SHARED_MODULE = $(filter $(SRC_PATTERNS), $(SRC_SHARED_MODULE_ALL))
+
+# Use the native touchio if requested. This flag is set conditionally in, say, mpconfigport.h.
+# The presence of common-hal/touchio/* # does not imply it's available for all chips in a port,
+# so there is an explicit flag. For example, SAMD21 touchio is native, but SAMD51 is not.
+ifeq ($(CIRCUITPY_TOUCHIO_USE_NATIVE),1)
+SRC_COMMON_HAL_ALL += \
+	touchio/TouchIn.c \
+	touchio/__init__.c
+else
+SRC_SHARED_MODULE_ALL += \
+	touchio/TouchIn.c \
+	touchio/__init__.c
+endif
 
 ifeq ($(INTERNAL_LIBM),1)
 SRC_LIBM = \

py/circuitpy_mpconfig.mk

@@ -74,6 +74,12 @@ CIRCUITPY_AUDIOIO = $(CIRCUITPY_FULL_BUILD)
 endif
 CFLAGS += -DCIRCUITPY_AUDIOIO=$(CIRCUITPY_AUDIOIO)
 
+ifndef CIRCUITPY_AUDIOIO_COMPAT
+CIRCUITPY_AUDIOIO_COMPAT = $(CIRCUITPY_AUDIOIO)
+endif
+CFLAGS += -DCIRCUITPY_AUDIOIO_COMPAT=$(CIRCUITPY_AUDIOIO_COMPAT)
+
+
 ifndef CIRCUITPY_AUDIOPWMIO
 CIRCUITPY_AUDIOPWMIO = 0
 endif
@@ -235,6 +241,12 @@ CIRCUITPY_TIME = $(CIRCUITPY_DEFAULT_BUILD)
 endif
 CFLAGS += -DCIRCUITPY_TIME=$(CIRCUITPY_TIME)
 
+# touchio might be native or generic. See circuitpy_defns.mk.
+ifndef CIRCUITPY_TOUCHIO_USE_NATIVE
+CIRCUITPY_TOUCHIO_USE_NATIVE = 0
+endif
+CFLAGS += -DCIRCUITPY_TOUCHIO_USE_NATIVE=$(CIRCUITPY_TOUCHIO_USE_NATIVE)
+
 ifndef CIRCUITPY_TOUCHIO
 CIRCUITPY_TOUCHIO = $(CIRCUITPY_DEFAULT_BUILD)
 endif

shared-bindings/audioio/__init__.c

@@ -33,6 +33,12 @@
 #include "shared-bindings/audioio/__init__.h"
 #include "shared-bindings/audioio/AudioOut.h"
 
+#ifdef CIRCUITPY_AUDIOIO_COMPAT
+#include "shared-bindings/audiocore/Mixer.h"
+#include "shared-bindings/audiocore/RawSample.h"
+#include "shared-bindings/audiocore/WaveFile.h"
+#endif
+
 //| :mod:`audioio` --- Support for audio input and output
 //| ======================================================
 //|
@@ -57,10 +63,19 @@
 //| Since CircuitPython 5, `Mixer`, `RawSample` and `WaveFile` are moved
 //| to :mod:`audiocore`.
 //|
+//| For compatibility with CircuitPython 4.x, some builds allow the items in
+//| `audiocore` to be imported from `audioio`.  This will be removed for all
+//| boards in a future build of CicuitPython.
+//|
 
 STATIC const mp_rom_map_elem_t audioio_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_audioio) },
     { MP_ROM_QSTR(MP_QSTR_AudioOut), MP_ROM_PTR(&audioio_audioout_type) },
+#ifdef CIRCUITPY_AUDIOIO_COMPAT
+    { MP_ROM_QSTR(MP_QSTR_Mixer), MP_ROM_PTR(&audioio_mixer_type) },
+    { MP_ROM_QSTR(MP_QSTR_RawSample), MP_ROM_PTR(&audioio_rawsample_type) },
+    { MP_ROM_QSTR(MP_QSTR_WaveFile), MP_ROM_PTR(&audioio_wavefile_type) },
+#endif
 };
 
 STATIC MP_DEFINE_CONST_DICT(audioio_module_globals, audioio_module_globals_table);

shared-bindings/displayio/Display.c

@@ -337,6 +337,23 @@ const mp_obj_property_t displayio_display_height_obj = {
               (mp_obj_t)&mp_const_none_obj},
 };
 
+//|   .. attribute:: rotation
+//|
+//|     The rotation of the display as an int in degrees.
+//|
+STATIC mp_obj_t displayio_display_obj_get_rotation(mp_obj_t self_in) {
+    displayio_display_obj_t *self = native_display(self_in);
+    return MP_OBJ_NEW_SMALL_INT(common_hal_displayio_display_get_rotation(self));
+}
+MP_DEFINE_CONST_FUN_OBJ_1(displayio_display_get_rotation_obj, displayio_display_obj_get_rotation);
+
+const mp_obj_property_t displayio_display_rotation_obj = {
+    .base.type = &mp_type_property,
+    .proxy = {(mp_obj_t)&displayio_display_get_rotation_obj,
+              (mp_obj_t)&mp_const_none_obj,
+              (mp_obj_t)&mp_const_none_obj},
+};
+
 //|   .. attribute:: bus
 //|
 //|	The bus being used by the display
@@ -356,16 +373,81 @@ const mp_obj_property_t displayio_display_bus_obj = {
 };
 
 
+//|   .. method:: fill_row(y, buffer)
+//|
+//|     Extract the pixels from a single row
+//|
+//|     :param int y: The top edge of the area
+//|     :param bytearray buffer: The buffer in which to place the pixel data
+STATIC mp_obj_t displayio_display_obj_fill_row(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
+    enum { ARG_y, ARG_buffer };
+    static const mp_arg_t allowed_args[] = {
+        { MP_QSTR_y, MP_ARG_INT | MP_ARG_REQUIRED, {.u_int = -1} },
+        { MP_QSTR_buffer, MP_ARG_OBJ | MP_ARG_REQUIRED, {} },
+    };
+    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
+    mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
+    displayio_display_obj_t *self = native_display(pos_args[0]);
+    mp_int_t y = args[ARG_y].u_int;
+    mp_obj_t *result = args[ARG_buffer].u_obj;
+
+    mp_buffer_info_t bufinfo;
+    mp_get_buffer_raise(result, &bufinfo, MP_BUFFER_WRITE);
+
+    if (bufinfo.typecode != BYTEARRAY_TYPECODE) {
+      mp_raise_ValueError(translate("Buffer is not a bytearray."));
+    }
+    if (self->colorspace.depth != 16) {
+      mp_raise_ValueError(translate("Display must have a 16 bit colorspace."));
+    }
+
+    displayio_area_t area = {
+      .x1 = 0,
+      .y1 = y,
+      .x2 = self->width,
+      .y2 = y + 1
+    };
+    uint8_t pixels_per_word = (sizeof(uint32_t) * 8) / self->colorspace.depth;
+    uint16_t buffer_size = self->width / pixels_per_word;
+    uint16_t pixels_per_buffer = displayio_area_size(&area);
+    if (pixels_per_buffer % pixels_per_word) {
+      buffer_size += 1;
+    }
+
+    uint32_t *result_buffer = bufinfo.buf;
+    size_t result_buffer_size = bufinfo.len;
+
+    if (result_buffer_size >= (buffer_size * 4)) {
+      volatile uint32_t mask_length = (pixels_per_buffer / 32) + 1;
+      uint32_t mask[mask_length];
+
+      for (uint16_t k = 0; k < mask_length; k++) {
+        mask[k] = 0x00000000;
+      }
+
+      displayio_display_fill_area(self, &area, mask, result_buffer);
+      return result;
+    } else {
+      mp_raise_ValueError(translate("Buffer is too small"));
+    }
+}
+MP_DEFINE_CONST_FUN_OBJ_KW(displayio_display_fill_row_obj, 1, displayio_display_obj_fill_row);
+
+
+
+
 STATIC const mp_rom_map_elem_t displayio_display_locals_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_show), MP_ROM_PTR(&displayio_display_show_obj) },
     { MP_ROM_QSTR(MP_QSTR_refresh_soon), MP_ROM_PTR(&displayio_display_refresh_soon_obj) },
     { MP_ROM_QSTR(MP_QSTR_wait_for_frame), MP_ROM_PTR(&displayio_display_wait_for_frame_obj) },
+    { MP_ROM_QSTR(MP_QSTR_fill_row), MP_ROM_PTR(&displayio_display_fill_row_obj) },
 
     { MP_ROM_QSTR(MP_QSTR_brightness), MP_ROM_PTR(&displayio_display_brightness_obj) },
     { MP_ROM_QSTR(MP_QSTR_auto_brightness), MP_ROM_PTR(&displayio_display_auto_brightness_obj) },
 
     { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&displayio_display_width_obj) },
     { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&displayio_display_height_obj) },
+    { MP_ROM_QSTR(MP_QSTR_rotation), MP_ROM_PTR(&displayio_display_rotation_obj) },
     { MP_ROM_QSTR(MP_QSTR_bus), MP_ROM_PTR(&displayio_display_bus_obj) },
 };
 STATIC MP_DEFINE_CONST_DICT(displayio_display_locals_dict, displayio_display_locals_dict_table);

shared-bindings/displayio/Display.h

@@ -69,6 +69,7 @@ void common_hal_displayio_display_set_auto_brightness(displayio_display_obj_t* s
 
 uint16_t common_hal_displayio_display_get_width(displayio_display_obj_t* self);
 uint16_t common_hal_displayio_display_get_height(displayio_display_obj_t* self);
+uint16_t common_hal_displayio_display_get_rotation(displayio_display_obj_t* self);
 
 mp_float_t common_hal_displayio_display_get_brightness(displayio_display_obj_t* self);
 bool common_hal_displayio_display_set_brightness(displayio_display_obj_t* self, mp_float_t brightness);

shared-bindings/touchio/TouchIn.c

@@ -68,10 +68,11 @@ STATIC mp_obj_t touchio_touchin_make_new(const mp_obj_type_t *type,
     // 1st argument is the pin
     mp_obj_t pin_obj = args[0];
     assert_pin(pin_obj, false);
+    const mcu_pin_obj_t *pin = MP_OBJ_TO_PTR(pin_obj);
+    assert_pin_free(pin);
 
     touchio_touchin_obj_t *self = m_new_obj(touchio_touchin_obj_t);
     self->base.type = &touchio_touchin_type;
-    const mcu_pin_obj_t *pin = MP_OBJ_TO_PTR(pin_obj);
     common_hal_touchio_touchin_construct(self, pin);
 
     return (mp_obj_t) self;

shared-bindings/touchio/TouchIn.h

@@ -28,7 +28,12 @@
 #define MICROPY_INCLUDED_SHARED_BINDINGS_TOUCHIO_TOUCHIN_H
 
 #include "common-hal/microcontroller/Pin.h"
+
+#if CIRCUITPY_TOUCHIO_USE_NATIVE
 #include "common-hal/touchio/TouchIn.h"
+#else
+#include "shared-module/touchio/TouchIn.h"
+#endif
 
 extern const mp_obj_type_t touchio_touchin_type;
 

shared-module/displayio/Display.c

@@ -119,7 +119,7 @@ void common_hal_displayio_display_construct(displayio_display_obj_t* self,
 
     self->width = width;
     self->height = height;
-    rotation = rotation % 360;
+    self->rotation = rotation % 360;
     self->transform.x = 0;
     self->transform.y = 0;
     self->transform.scale = 1;
@@ -257,6 +257,10 @@ uint16_t common_hal_displayio_display_get_height(displayio_display_obj_t* self){
     return self->height;
 }
 
+uint16_t common_hal_displayio_display_get_rotation(displayio_display_obj_t* self){
+    return self->rotation;
+}
+
 void common_hal_displayio_display_set_auto_brightness(displayio_display_obj_t* self, bool auto_brightness) {
     self->auto_brightness = auto_brightness;
 }

shared-module/displayio/Display.h

@@ -55,6 +55,7 @@ typedef struct {
     mp_float_t current_brightness;
     uint16_t width;
     uint16_t height;
+    uint16_t rotation;
     _displayio_colorspace_t colorspace;
     int16_t colstart;
     int16_t rowstart;

shared-module/touchio/TouchIn.c

@@ -28,15 +28,9 @@
 #include <string.h>
 #include <stdio.h>
 
-#include "py/nlr.h"
-#include "py/mperrno.h"
 #include "py/runtime.h"
-#include "py/binary.h"
 #include "py/mphal.h"
 #include "shared-bindings/touchio/TouchIn.h"
-#include "supervisor/shared/translate.h"
-
-#include "nrf.h"
 
 // This is a capacitive touch sensing routine using a single digital
 // pin.  The pin should be connected to the sensing pad, and to ground
@@ -57,15 +51,14 @@ static uint16_t get_raw_reading(touchio_touchin_obj_t *self) {
     for (uint16_t i = 0; i < N_SAMPLES; i++) {
         // set pad to digital output high for 10us to charge it
 
-        nrf_gpio_cfg_output(self->pin->number);
+        common_hal_digitalio_digitalinout_switch_to_output(self->digitalinout, true, DRIVE_MODE_PUSH_PULL);
-        nrf_gpio_pin_set(self->pin->number);
         mp_hal_delay_us(10);
 
         // set pad back to an input and take some samples
 
-        nrf_gpio_cfg_input(self->pin->number, NRF_GPIO_PIN_NOPULL);
+        common_hal_digitalio_digitalinout_switch_to_input(self->digitalinout, PULL_NONE);
 
-        while(nrf_gpio_pin_read(self->pin->number)) {
+        while(common_hal_digitalio_digitalinout_get_value(self->digitalinout)) {
             if (ticks >= TIMEOUT_TICKS) return TIMEOUT_TICKS;
             ticks++;
         }
@@ -73,16 +66,22 @@ static uint16_t get_raw_reading(touchio_touchin_obj_t *self) {
     return ticks;
 }
 
-void common_hal_touchio_touchin_construct(touchio_touchin_obj_t* self,
+void common_hal_touchio_touchin_construct(touchio_touchin_obj_t* self, const mcu_pin_obj_t *pin) {
-        const mcu_pin_obj_t *pin) {
-    self->pin = pin;
     claim_pin(pin);
+    self->digitalinout = m_new_obj(digitalio_digitalinout_obj_t);
+    self->digitalinout->base.type = &digitalio_digitalinout_type;
 
-    self->threshold = get_raw_reading(self) * 1.05 + 100;
+    common_hal_digitalio_digitalinout_construct(self->digitalinout, pin);
+
+    uint16_t raw_reading = get_raw_reading(self);
+    if (raw_reading == TIMEOUT_TICKS) {
+        mp_raise_ValueError(translate("No pulldown on pin; 1Mohm recommended"));
+    }
+    self->threshold = raw_reading * 1.05 + 100;
 }
 
 bool common_hal_touchio_touchin_deinited(touchio_touchin_obj_t* self) {
-    return self->pin == NULL;
+    return self->digitalinout == MP_OBJ_NULL;
 }
 
 void common_hal_touchio_touchin_deinit(touchio_touchin_obj_t* self) {
@@ -90,8 +89,8 @@ void common_hal_touchio_touchin_deinit(touchio_touchin_obj_t* self) {
         return;
     }
 
-    reset_pin_number(self->pin->number);
+    common_hal_digitalio_digitalinout_deinit(self->digitalinout);
-    self->pin = NULL;
+    self->digitalinout = MP_OBJ_NULL;
 }
 
 void touchin_reset() {

shared-module/touchio/TouchIn.h

@@ -25,19 +25,20 @@
  * THE SOFTWARE.
  */
 
-#ifndef MICROPY_INCLUDED_NRF_COMMON_HAL_TOUCHIO_TOUCHIN_H
+#ifndef MICROPY_INCLUDED_SHARED_MODULE_TOUCHIO_TOUCHIN_H
-#define MICROPY_INCLUDED_NRF_COMMON_HAL_TOUCHIO_TOUCHIN_H
+#define MICROPY_INCLUDED_SHARED_MODULE_TOUCHIO_TOUCHIN_H
 
 #include "common-hal/microcontroller/Pin.h"
+#include "shared-bindings/digitalio/DigitalInOut.h"
 
 #include "py/obj.h"
 
 typedef struct {
     mp_obj_base_t base;
-    const mcu_pin_obj_t *pin;
+    digitalio_digitalinout_obj_t *digitalinout;
     uint16_t threshold;
 } touchio_touchin_obj_t;
 
 void touchin_reset(void);
 
-#endif // MICROPY_INCLUDED_NRF_COMMON_HAL_TOUCHIO_TOUCHIN_H
+#endif // MICROPY_INCLUDED_SHARED_MODULE_TOUCHIO_TOUCHIN_H