Merge pull request #1202 from tannewt/wrong_playback_frequency

Clock the SAMD21 much faster so it can actually convert at its max
This commit is contained in:
Dan Halbert 2018-09-18 22:08:07 -04:00 committed by GitHub
commit af7a0eedf0
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 21 additions and 8 deletions

View File

@ -385,7 +385,7 @@
// <i> Select the clock source for DAC.
#ifndef CONF_GCLK_DAC_SRC
#define CONF_GCLK_DAC_SRC GCLK_CLKCTRL_GEN_GCLK1_Val
#define CONF_GCLK_DAC_SRC GCLK_CLKCTRL_GEN_GCLK0_Val
#endif
/**
@ -393,7 +393,7 @@
* \brief DAC's Clock frequency
*/
#ifndef CONF_GCLK_DAC_FREQUENCY
#define CONF_GCLK_DAC_FREQUENCY 320000
#define CONF_GCLK_DAC_FREQUENCY 48000000
#endif
// <y> USB Clock Source

View File

@ -109,13 +109,14 @@ void common_hal_audioio_audioout_construct(audioio_audioout_obj_t* self,
_pm_enable_bus_clock(PM_BUS_APBC, DAC);
#endif
// SAMD21: This clock should be <= 12 MHz, per datasheet section 47.6.3.
// SAMD51: This clock should be <= 350kHz, per datasheet table 37-6.
// SAMD51: This clock should be <= 12 MHz, per datasheet section 47.6.3.
// SAMD21: This clock is 48mhz despite the datasheet saying it must only be <= 350kHz, per
// datasheet table 37-6. It's incorrect because the max output rate is 350ksps and is only
// achieved when the GCLK is more than 8mhz.
_gclk_enable_channel(DAC_GCLK_ID, CONF_GCLK_DAC_SRC);
DAC->CTRLA.bit.SWRST = 1;
while (DAC->CTRLA.bit.SWRST == 1) {}
DAC->CTRLA.bit.SWRST = 1;
while (DAC->CTRLA.bit.SWRST == 1) {}
bool channel0_enabled = true;
#ifdef SAMD51
@ -126,9 +127,11 @@ void common_hal_audioio_audioout_construct(audioio_audioout_obj_t* self,
if (channel0_enabled) {
#ifdef SAMD21
DAC->EVCTRL.reg |= DAC_EVCTRL_STARTEI;
// We disable the voltage pump because we always run at 3.3v.
DAC->CTRLB.reg = DAC_CTRLB_REFSEL_AVCC |
DAC_CTRLB_LEFTADJ |
DAC_CTRLB_EOEN;
DAC_CTRLB_EOEN |
DAC_CTRLB_VPD;
#endif
#ifdef SAMD51
DAC->EVCTRL.reg |= DAC_EVCTRL_STARTEI0;
@ -278,6 +281,16 @@ void common_hal_audioio_audioout_play(audioio_audioout_obj_t* self,
common_hal_audioio_audioout_stop(self);
}
audio_dma_result result = AUDIO_DMA_OK;
uint32_t sample_rate = audiosample_sample_rate(sample);
#ifdef SAMD21
uint32_t max_sample_rate = 350000;
#endif
#ifdef SAMD51
uint32_t max_sample_rate = 1000000;
#endif
if (sample_rate > max_sample_rate) {
mp_raise_ValueError_varg("Sample rate too high. It must be less than %d", max_sample_rate);
}
#ifdef SAMD21
result = audio_dma_setup_playback(&self->left_dma, sample, loop, true, 0,
false /* output unsigned */,