Add Waveshare RP2040-LCD-0.96
This commit is contained in:
parent
ef2bcf7f50
commit
af35337136
|
@ -0,0 +1,129 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "supervisor/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
#include "shared-module/displayio/__init__.h"
|
||||
#include "shared-module/displayio/mipi_constants.h"
|
||||
|
||||
#define DELAY 0x80
|
||||
|
||||
|
||||
// display init sequence according to Adafruit_CircuitPython_ST7735R
|
||||
// https://github.com/adafruit/Adafruit_CircuitPython_ST7735R
|
||||
uint8_t display_init_sequence[] = {
|
||||
// sw reset
|
||||
0x01, 0 | DELAY, 0x96,
|
||||
// SLPOUT and Delay
|
||||
0x11, 0 | DELAY, 0xFF,
|
||||
0xB1, 0x03, 0x01, 0x2C, 0x2D, // _FRMCTR1
|
||||
0xB3, 0x06, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D, // _FRMCTR3
|
||||
0xB4, 0x01, 0x07, // _INVCTR line inversion
|
||||
0xC0, 0x03, 0xA2, 0x02, 0x84, // _PWCTR1 GVDD = 4.7V, 1.0uA
|
||||
0xC1, 0x01, 0xC5, // _PWCTR2 VGH=14.7V, VGL=-7.35V
|
||||
0xC2, 0x02, 0x0A, 0x00, // _PWCTR3 Opamp current small, Boost frequency
|
||||
0xC3, 0x02, 0x8A, 0x2A,
|
||||
0xC4, 0x02, 0x8A, 0xEE,
|
||||
0xC5, 0x01, 0x0E, // _VMCTR1 VCOMH = 4V, VOML = -1.1V
|
||||
0x20, 0x00, // _INVOFF
|
||||
0x36, 0x01, 0x18, // _MADCTL bottom to top refresh
|
||||
// 1 clk cycle nonoverlap, 2 cycle gate rise, 3 cycle osc equalie,
|
||||
// fix on VTL
|
||||
0x3A, 0x01, 0x05, // COLMOD - 16bit color
|
||||
0xE0, 0x10, 0x02, 0x1C, 0x07, 0x12, 0x37, 0x32, 0x29, 0x2D, 0x29, 0x25, 0x2B, 0x39, 0x00, 0x01, 0x03, 0x10, // _GMCTRP1 Gamma
|
||||
0xE1, 0x10, 0x03, 0x1D, 0x07, 0x06, 0x2E, 0x2C, 0x29, 0x2D, 0x2E, 0x2E, 0x37, 0x3F, 0x00, 0x00, 0x02, 0x10, // _GMCTRN1
|
||||
0x13, 0 | DELAY, 0x0A, // _NORON
|
||||
0x29, 0 | DELAY, 0x64, // _DISPON
|
||||
// 0x36, 0x01, 0xC0, // _MADCTL Default rotation plus BGR encoding
|
||||
0x36, 0x01, 0xC8, // _MADCTL Default rotation plus RGB encoding
|
||||
0x21, 0x00, // _INVON
|
||||
};
|
||||
|
||||
static void display_init(void) {
|
||||
busio_spi_obj_t *spi = &displays[0].fourwire_bus.inline_bus;
|
||||
common_hal_busio_spi_construct(
|
||||
spi,
|
||||
&pin_GPIO10, // CLK
|
||||
&pin_GPIO11, // MOSI
|
||||
NULL, // MISO not connected
|
||||
false // Not half-duplex
|
||||
);
|
||||
|
||||
common_hal_busio_spi_never_reset(spi);
|
||||
|
||||
displayio_fourwire_obj_t *bus = &displays[0].fourwire_bus;
|
||||
bus->base.type = &displayio_fourwire_type;
|
||||
|
||||
common_hal_displayio_fourwire_construct(
|
||||
bus,
|
||||
spi,
|
||||
&pin_GPIO8, // DC
|
||||
&pin_GPIO9, // CS
|
||||
&pin_GPIO12, // RST
|
||||
40000000, // baudrate
|
||||
0, // polarity
|
||||
0 // phase
|
||||
);
|
||||
|
||||
displayio_display_obj_t *display = &displays[0].display;
|
||||
display->base.type = &displayio_display_type;
|
||||
common_hal_displayio_display_construct(
|
||||
display,
|
||||
bus,
|
||||
160, // width (after rotation)
|
||||
80, // height (after rotation)
|
||||
26, // column start
|
||||
1, // row start
|
||||
90, // rotation
|
||||
16, // color depth
|
||||
false, // grayscale
|
||||
false, // pixels in a byte share a row. Only valid for depths < 8
|
||||
1, // bytes per cell. Only valid for depths < 8
|
||||
false, // reverse_pixels_in_byte. Only valid for depths < 8
|
||||
true, // reverse_pixels_in_word
|
||||
MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
|
||||
MIPI_COMMAND_SET_PAGE_ADDRESS, // set row command
|
||||
MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
|
||||
display_init_sequence,
|
||||
sizeof(display_init_sequence),
|
||||
&pin_GPIO25, // backlight pin
|
||||
NO_BRIGHTNESS_COMMAND,
|
||||
1.0f, // brightness
|
||||
false, // single_byte_bounds
|
||||
false, // data_as_commands
|
||||
true, // auto_refresh
|
||||
60, // native_frames_per_second
|
||||
true, // backlight_on_high
|
||||
false, // SH1107_addressing
|
||||
50000 // backlight pwm frequency
|
||||
);
|
||||
}
|
||||
|
||||
void board_init(void) {
|
||||
// Display
|
||||
display_init();
|
||||
}
|
||||
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
|
|
@ -0,0 +1,11 @@
|
|||
#define MICROPY_HW_BOARD_NAME "Waveshare RP2040-LCD-0.96"
|
||||
#define MICROPY_HW_MCU_NAME "rp2040"
|
||||
|
||||
#define CIRCUITPY_BOARD_I2C (1)
|
||||
#define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO21, .sda = &pin_GPIO20}}
|
||||
|
||||
#define CIRCUITPY_BOARD_SPI (1)
|
||||
#define CIRCUITPY_BOARD_SPI_PIN {{.clock = &pin_GPIO18, .mosi = &pin_GPIO19, .miso = &pin_GPIO16}}
|
||||
|
||||
#define CIRCUITPY_BOARD_UART (1)
|
||||
#define CIRCUITPY_BOARD_UART_PIN {{.tx = &pin_GPIO0, .rx = &pin_GPIO1}}
|
|
@ -0,0 +1,11 @@
|
|||
USB_VID = 0x2E8A
|
||||
USB_PID = 0x1021
|
||||
USB_PRODUCT = "Waveshare RP2040-LCD-0.96"
|
||||
USB_MANUFACTURER = "Waveshare Electronics"
|
||||
|
||||
CHIP_VARIANT = RP2040
|
||||
CHIP_FAMILY = rp2
|
||||
|
||||
EXTERNAL_FLASH_DEVICES = "W25Q16JVxQ"
|
||||
|
||||
CIRCUITPY__EVE = 1
|
|
@ -0,0 +1 @@
|
|||
// Put board-specific pico-sdk definitions here. This file must exist.
|
|
@ -0,0 +1,57 @@
|
|||
#include "shared-bindings/board/__init__.h"
|
||||
#include "shared-module/displayio/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP0), MP_ROM_PTR(&pin_GPIO0) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP1), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP2), MP_ROM_PTR(&pin_GPIO2) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP3), MP_ROM_PTR(&pin_GPIO3) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP4), MP_ROM_PTR(&pin_GPIO4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP5), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP6), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP7), MP_ROM_PTR(&pin_GPIO7) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP8), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP9), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP10), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP11), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP12), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP13), MP_ROM_PTR(&pin_GPIO13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP14), MP_ROM_PTR(&pin_GPIO14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP15), MP_ROM_PTR(&pin_GPIO15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP16), MP_ROM_PTR(&pin_GPIO16) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP17), MP_ROM_PTR(&pin_GPIO17) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP18), MP_ROM_PTR(&pin_GPIO18) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP19), MP_ROM_PTR(&pin_GPIO19) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP20), MP_ROM_PTR(&pin_GPIO20) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP21), MP_ROM_PTR(&pin_GPIO21) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP22), MP_ROM_PTR(&pin_GPIO22) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP25), MP_ROM_PTR(&pin_GPIO25) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP26), MP_ROM_PTR(&pin_GPIO26) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP27), MP_ROM_PTR(&pin_GPIO27) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP28), MP_ROM_PTR(&pin_GPIO28) },
|
||||
|
||||
// ADC
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO28) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP26_A0), MP_ROM_PTR(&pin_GPIO26) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP27_A1), MP_ROM_PTR(&pin_GPIO27) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP28_A2), MP_ROM_PTR(&pin_GPIO28) },
|
||||
|
||||
// 0.96 inch LCD ST7735s
|
||||
{ MP_ROM_QSTR(MP_QSTR_LCD_DC), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LCD_CLK), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LCD_DIN), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LCD_RST), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LCD_BL), MP_ROM_PTR(&pin_GPIO25) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
|
||||
|
||||
// Power pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_SMPS_MODE), MP_ROM_PTR(&pin_GPIO23) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VBUS_SENSE), MP_ROM_PTR(&pin_GPIO24) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO29) },
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
Loading…
Reference in New Issue