Merge branch 'adafruit:main' into main

conf.py

@@ -77,6 +77,7 @@ needs_sphinx = '1.3'
 extensions = [
     'sphinx.ext.autodoc',
     'sphinx.ext.doctest',
+    "sphinxcontrib.jquery",
     'sphinxcontrib.rsvgconverter',
     'sphinx.ext.intersphinx',
     'sphinx.ext.todo',

locale/ID.po

@@ -403,10 +403,6 @@ msgstr "0.0 ke kompleks berpangkat"
 msgid "3-arg pow() not supported"
 msgstr "pow() 3-arg tidak didukung"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1283,6 +1279,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Ukuran potongan format tidak valid"

locale/circuitpython.pot

@@ -400,10 +400,6 @@ msgstr ""
 msgid "3-arg pow() not supported"
 msgstr ""
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1271,6 +1267,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr ""

locale/cs.po

@@ -404,10 +404,6 @@ msgstr ""
 msgid "3-arg pow() not supported"
 msgstr "pow() nepodporuje 3 argumenty"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "64 bit typy"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1283,6 +1279,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr "Chybný data_pin[%d]"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Neplatná velikost bloku"
@@ -4382,6 +4382,9 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "64 bit types"
+#~ msgstr "64 bit typy"
+
 #~ msgid "No key was specified"
 #~ msgstr "Nebyl zadán klíč"
 

locale/de_DE.po

@@ -6,14 +6,14 @@ msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-03-01 17:39+0000\n"
+"PO-Revision-Date: 2023-03-28 14:18+0000\n"
-"Last-Translator: Ettore Atalan <atalanttore@googlemail.com>\n"
+"Last-Translator: Luc <some_physics@live.com>\n"
 "Language: de_DE\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.16\n"
+"X-Generator: Weblate 4.17-dev\n"
 
 #: main.c
 msgid ""
@@ -37,12 +37,17 @@ msgid ""
 "Please file an issue with your program at https://github.com/adafruit/"
 "circuitpython/issues."
 msgstr ""
+"\n"
+"Bitte erstellen Sie ein Problem (Issue) für Ihr Programm unter https://"
+"github.com/adafruit/circuitpython/issues."
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Press reset to exit safe mode.\n"
 msgstr ""
+"\n"
+"Drücke Reset, um den Sicherheitsmodus zu beenden.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -189,7 +194,7 @@ msgstr "%q muss >= %d sein"
 
 #: shared-bindings/analogbufio/BufferedIn.c
 msgid "%q must be a bytearray or array of type 'H' or 'B'"
-msgstr ""
+msgstr "%q muss ein Bytearray oder ein Array vom Typ 'H' oder 'B' sein"
 
 #: shared-bindings/audiocore/RawSample.c
 msgid "%q must be a bytearray or array of type 'h', 'H', 'b', or 'B'"
@@ -198,7 +203,7 @@ msgstr ""
 
 #: ports/espressif/common-hal/analogbufio/BufferedIn.c
 msgid "%q must be array of type 'H'"
-msgstr ""
+msgstr "%q muss ein Array vom Typ 'H' sein"
 
 #: ports/raspberrypi/bindings/cyw43/__init__.c py/argcheck.c py/objexcept.c
 #: shared-bindings/canio/CAN.c shared-bindings/digitalio/Pull.c
@@ -409,10 +414,6 @@ msgstr "0.0 zu einer komplexen Potenz"
 msgid "3-arg pow() not supported"
 msgstr "3-arg pow() wird nicht unterstützt"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "64 bit-Typen"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -526,7 +527,7 @@ msgstr "Sucht bereits nach Wifi-Netzwerken"
 #: shared-module/os/getenv.c
 #, c-format
 msgid "An error occurred while retrieving '%s':\n"
-msgstr ""
+msgstr "Ein Fehler ist aufgetreten beim Abfragen von '%s':\n"
 
 #: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
 msgid "Another PWMAudioOut is already active"
@@ -602,7 +603,7 @@ msgstr "Bitmap-Grösse und Bits pro Wert müssen übereinstimmen"
 
 #: supervisor/shared/safe_mode.c
 msgid "Boot device must be first (interface #0)."
-msgstr ""
+msgstr "Boot-Device muss an erster Stelle kommen (Interface #0)."
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
@@ -792,9 +793,8 @@ msgstr ""
 "Die Frequenz eines bereits verwendeten Timers kann nicht variiert werden"
 
 #: ports/nrf/common-hal/alarm/pin/PinAlarm.c
-#, fuzzy
 msgid "Cannot wake on pin edge, only level"
-msgstr "Kann nicht durch \"Pin edge\" geweckt werden nur durch \"level\""
+msgstr "Kann nicht durch Flanke an Pin geweckt werden, sondern nur durch Pegel"
 
 #: ports/espressif/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
@@ -826,11 +826,11 @@ msgstr ""
 
 #: shared-bindings/bitmaptools/__init__.c
 msgid "Coordinate arrays have different lengths"
-msgstr ""
+msgstr "Koordinaten-Arrays haben unterschiedliche Längen"
 
 #: shared-bindings/bitmaptools/__init__.c
 msgid "Coordinate arrays types have different sizes"
-msgstr ""
+msgstr "Typen der Koordinaten-Arrays haben unterschiedliche Längen"
 
 #: py/persistentcode.c
 msgid "Corrupt .mpy file"
@@ -951,7 +951,7 @@ msgstr "Fehler in regex"
 
 #: supervisor/shared/safe_mode.c
 msgid "Error in safemode.py."
-msgstr ""
+msgstr "Fehler in safemode.py."
 
 #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
 msgid "Error: Failure to bind"
@@ -1028,7 +1028,7 @@ msgstr "Interner Flash konnte nicht geschrieben werden."
 
 #: supervisor/shared/safe_mode.c
 msgid "Fault detected by hardware."
-msgstr ""
+msgstr "Hardware hat Fehler festgestellt."
 
 #: py/moduerrno.c
 msgid "File exists"
@@ -1121,12 +1121,13 @@ msgstr "Hardware in Benutzung, probiere alternative Pins"
 
 #: supervisor/shared/safe_mode.c
 msgid "Heap allocation when VM not running."
-msgstr ""
+msgstr "Allokation auf Heap während VM nicht läuft."
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Heap was corrupted because the stack was too small. Increase stack size."
 msgstr ""
+"Heap wurde beschädigt, weil der Stack zu klein war. Bitte Stack vergrößern."
 
 #: extmod/vfs_posix_file.c py/objstringio.c
 msgid "I/O operation on closed file"
@@ -1250,7 +1251,7 @@ msgstr "Der Interne WatchDog Timer ist abgelaufen."
 
 #: supervisor/shared/safe_mode.c
 msgid "Interrupt error."
-msgstr ""
+msgstr "Interrupt Fehler."
 
 #: ports/mimxrt10xx/common-hal/pwmio/PWMOut.c py/argcheck.c
 #: shared-bindings/digitalio/DigitalInOut.c
@@ -1278,7 +1279,7 @@ msgstr "Ungültige BSSID"
 
 #: main.c
 msgid "Invalid CIRCUITPY_PYSTACK_SIZE\n"
-msgstr ""
+msgstr "Ungültiger Wert CIRCUITPY_PYSTACK_SIZE\n"
 
 #: shared-bindings/wifi/Radio.c
 msgid "Invalid MAC address"
@@ -1302,6 +1303,10 @@ msgstr "Ungültiges Byte %.*s"
 msgid "Invalid data_pins[%d]"
 msgstr "Ungültige data_pins[%d]"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Ungültige format chunk size"
@@ -1325,7 +1330,7 @@ msgstr "Ungültiger Zustand"
 
 #: shared-module/os/getenv.c
 msgid "Invalid unicode escape"
-msgstr ""
+msgstr "Ungültiges Unicode-Escape-Zeichen"
 
 #: shared-bindings/aesio/aes.c
 msgid "Key must be 16, 24, or 32 bytes long"
@@ -1720,7 +1725,7 @@ msgstr "Zeit für Vorgang abgelaufen"
 
 #: ports/raspberrypi/common-hal/mdns/Server.c
 msgid "Out of MDNS service slots"
-msgstr ""
+msgstr "Keine freien Slots für MDNS-Dienst mehr verfügbar"
 
 #: ports/espressif/common-hal/espidf/__init__.c
 msgid "Out of memory"
@@ -1826,7 +1831,7 @@ msgstr "Polygone brauchen mindestens 3 Punkte"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Prefix buffer must be on the heap"
-msgstr "Der Präfix-Puffer muss sich auf dem Heap befinden"
+msgstr "Präfix-Puffer muss sich auf dem Heap befinden"
 
 #: main.c
 msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
@@ -1874,7 +1879,7 @@ msgstr "RNG DeInit-Fehler"
 
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG Init Error"
-msgstr "RNG Init-Fehler"
+msgstr "RNG-Init-Fehler"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
@@ -1977,7 +1982,7 @@ msgstr "Maßstabs-Abmeßungen müssen durch 3 teilbar sein"
 #: ports/espressif/common-hal/_bleio/Adapter.c
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Scan already in progress. Stop with stop_scan."
-msgstr ""
+msgstr "Scan läuft schon. Stoppen mit stop_scan."
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
@@ -2015,7 +2020,7 @@ msgstr "SocketPool kann nur mit wifi.radio verwendet werden"
 
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
-msgstr "Quell- und Zielbuffer müssen gleich lang sein"
+msgstr "Quell- und Zielpuffer müssen gleich lang sein"
 
 #: shared-bindings/paralleldisplay/ParallelBus.c
 msgid "Specify exactly one of data0 or data_pins"
@@ -2035,7 +2040,7 @@ msgstr "Stereo rechts muss sich auf PWM-Kanal B befinden"
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "Stopping AP is not supported."
-msgstr ""
+msgstr "Das Stoppen des AP wird nicht unterstützt."
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Supply one of monotonic_time or epoch_time"
@@ -2052,6 +2057,8 @@ msgstr "Zeitüberschreitung beim Auslesen der Temperatur"
 #: supervisor/shared/safe_mode.c
 msgid "The `microcontroller` module was used to boot into safe mode."
 msgstr ""
+"Das 'microcontroller'-Modul wurde benutzt, um in den Sichheitsmodus zu "
+"booten."
 
 #: py/obj.c
 msgid "The above exception was the direct cause of the following exception:"
@@ -2065,6 +2072,8 @@ msgstr "Die Länge von rgb_pins muss 6, 12, 18, 24 oder 30 betragen"
 #: supervisor/shared/safe_mode.c
 msgid "The power dipped. Make sure you are providing enough power."
 msgstr ""
+"Die Spannung ist eingebrochen. Stelle sicher, dass genügend Leistung "
+"verfügbar ist."
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -2073,7 +2082,7 @@ msgstr ""
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's channel count does not match the mixer's"
-msgstr "Die Kanalanzahl des Samples stimmt nicht mit der des Mixers überein"
+msgstr "Die Kanalanzahl des Samples stimmt nicht mit der des Mischers überein"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's sample rate does not match the mixer's"
@@ -2081,12 +2090,11 @@ msgstr "Die Abtastrate der Probe stimmt nicht mit der des Mischers überein"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's signedness does not match the mixer's"
-msgstr ""
+msgstr "Der Vorzeichentyp des Samples stimmt nicht mit dem des Mixers überein"
-"Die Art des Vorzeichens des Samples stimmt nicht mit dem des Mixers überein"
 
 #: supervisor/shared/safe_mode.c
 msgid "Third-party firmware fatal error."
-msgstr ""
+msgstr "Fataler Fehler bei Drittanbieter-Firmware."
 
 #: shared-module/imagecapture/ParallelImageCapture.c
 msgid "This microcontroller does not support continuous capture."
@@ -2106,7 +2114,7 @@ msgstr "Die Kachelhöhe muss die Bitmaphöhe genau teilen"
 
 #: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
 msgid "Tile index out of bounds"
-msgstr "Kachel index außerhalb der Grenzen"
+msgstr "Kachelindex außerhalb der Grenzen"
 
 #: shared-bindings/displayio/TileGrid.c
 msgid "Tile width must exactly divide bitmap width"
@@ -2133,7 +2141,7 @@ msgstr "Zu viele Kanäle im sample."
 
 #: shared-module/displayio/__init__.c
 msgid "Too many display busses"
-msgstr "Zu viele Display Busse"
+msgstr "Zu viele Anzeigebusse"
 
 #: shared-module/displayio/__init__.c
 msgid "Too many displays"
@@ -2169,7 +2177,7 @@ msgstr "UART-Initialisierung"
 
 #: ports/raspberrypi/common-hal/busio/UART.c
 msgid "UART peripheral in use"
-msgstr ""
+msgstr "UART-Endgerät in Benutzung"
 
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART re-init"
@@ -2220,12 +2228,12 @@ msgstr "Konnte keine Buffer für Vorzeichenumwandlung allozieren"
 
 #: supervisor/shared/safe_mode.c
 msgid "Unable to allocate the heap."
-msgstr ""
+msgstr "Keine Allokation auf dem Heap möglich."
 
 #: ports/espressif/common-hal/analogbufio/BufferedIn.c
 #, c-format
 msgid "Unable to configure ADC DMA controller, ErrorCode:%d"
-msgstr ""
+msgstr "ADC-DMA-Controller konnte nicht konfiguriert werden, Fehlercode: %d"
 
 #: ports/espressif/common-hal/busio/I2C.c
 msgid "Unable to create lock"
@@ -2248,7 +2256,7 @@ msgstr "Parser konnte nicht gestartet werden"
 #: ports/espressif/common-hal/analogbufio/BufferedIn.c
 #, c-format
 msgid "Unable to initialize ADC DMA controller, ErrorCode:%d"
-msgstr ""
+msgstr "ADC-DMA-Controller konnte nicht initialisiert werden, Fehlercode: %d"
 
 #: shared-module/displayio/OnDiskBitmap.c
 msgid "Unable to read color palette data"
@@ -2257,7 +2265,7 @@ msgstr "Konnte Farbpalettendaten nicht lesen"
 #: ports/espressif/common-hal/analogbufio/BufferedIn.c
 #, c-format
 msgid "Unable to start ADC DMA controller, ErrorCode:%d"
-msgstr ""
+msgstr "ADC-DMA-Controller konnte nicht gestartet werden, Fehlercode: %d"
 
 #: ports/espressif/common-hal/mdns/Server.c
 #: ports/raspberrypi/common-hal/mdns/Server.c
@@ -2298,7 +2306,7 @@ msgstr "Unbekannter BLE-Fehler: %d"
 #: ports/raspberrypi/common-hal/wifi/__init__.c
 #, c-format
 msgid "Unknown error code %d"
-msgstr ""
+msgstr "Unbekannter Fehlercode %d"
 
 #: shared-bindings/wifi/Radio.c
 #, c-format
@@ -2376,7 +2384,7 @@ msgstr "Update fehlgeschlagen"
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
-msgstr "Wert Länge != Erforderliche feste Länge"
+msgstr "Länge des Wertes != Erforderliche feste Länge"
 
 #: ports/espressif/common-hal/_bleio/Characteristic.c
 #: ports/espressif/common-hal/_bleio/Descriptor.c
@@ -2437,11 +2445,11 @@ msgstr "Wi-Fi: "
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "Wifi is in access point mode."
-msgstr ""
+msgstr "Das Wifi ist im Accesspoint-Modus."
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "Wifi is in station mode."
-msgstr ""
+msgstr "Das Wifi ist im Station-Modus."
 
 #: ports/raspberrypi/common-hal/wifi/Radio.c
 msgid "Wifi is not enabled"
@@ -2454,59 +2462,59 @@ msgstr "Aufgeweckt durch Alarm.\n"
 #: ports/espressif/common-hal/_bleio/PacketBuffer.c
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
-msgstr "Schreiben nicht unterstüzt für diese Charakteristik"
+msgstr "Schreiben für diese Charakteristik nicht unterstützt"
 
 #: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
 #: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
 #: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
 #: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
 msgid "You pressed both buttons at start up."
-msgstr ""
+msgstr "Beide Knöpfe wurden beim Starten gedrückt."
 
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
 msgid "You pressed button A at start up."
-msgstr ""
+msgstr "Knopf A wurde beim Starten gedrückt."
 
 #: supervisor/shared/safe_mode.c
 msgid "You pressed the BOOT button at start up"
-msgstr ""
+msgstr "Der BOOT-Knopf wurde beim Starten gedrückt."
 
 #: ports/espressif/boards/adafruit_huzzah32_breakout/mpconfigboard.h
 msgid "You pressed the GPIO0 button at start up."
-msgstr ""
+msgstr "Der GPIO0-Knopf wurde beim Starten gedrückt."
 
 #: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
 msgid "You pressed the Rec button at start up."
-msgstr ""
+msgstr "Der Rec-Knopf wurde beim Starten gedrückt."
 
 #: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
 msgid "You pressed the SW38 button at start up."
-msgstr ""
+msgstr "Der SW38-Knopf wurde beim Starten gedrückt."
 
 #: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
 msgid "You pressed the VOLUME button at start up."
-msgstr ""
+msgstr "Der VOLUME-Knopf wurde beim Starten gedrückt."
 
 #: ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h
 #: ports/espressif/boards/m5stack_atom_u/mpconfigboard.h
 msgid "You pressed the central button at start up."
-msgstr ""
+msgstr "Der zentrale Knopf wurde beim Starten gedrückt."
 
 #: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
 msgid "You pressed the left button at start up."
-msgstr ""
+msgstr "Der linke Knopf wurde beim Starten gedrückt."
 
 #: supervisor/shared/safe_mode.c
 msgid "You pressed the reset button during boot."
-msgstr ""
+msgstr "Der Reset-Knopf wurde beim Booten gedrückt."
 
 #: supervisor/shared/micropython.c
 msgid "[truncated due to length]"
-msgstr ""
+msgstr "[abgeschnitten wegen der Länge]"
 
 #: py/objtype.c
 msgid "__init__() should return None"
@@ -2579,7 +2587,7 @@ msgstr "Das Array hat zu viele Dimensionen"
 
 #: extmod/ulab/code/ndarray.c
 msgid "array is too big"
-msgstr ""
+msgstr "Array ist zu groß"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
@@ -2794,8 +2802,8 @@ msgstr "kann keinen relativen Import durchführen"
 #: py/objgenerator.c
 msgid "can't send non-None value to a just-started generator"
 msgstr ""
-"Nicht \"None\" Werte können nicht an einen gerade gestarteten Generator "
+"Nicht-None-Wert kann nicht an einen gerade gestarteten Generator gesendet "
-"gesendet werden"
+"werden"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "can't set 512 block size"
@@ -2807,7 +2815,7 @@ msgstr "kann Attribut nicht setzen"
 
 #: py/runtime.c shared-bindings/supervisor/Runtime.c
 msgid "can't set attribute '%q'"
-msgstr ""
+msgstr "Attribut '%q' kann nicht gesetzt werden"
 
 #: py/emitnative.c
 msgid "can't store '%q'"
@@ -2877,7 +2885,7 @@ msgstr "Kanal wird erneut initialisiert"
 
 #: shared-bindings/_stage/Text.c
 msgid "chars buffer too small"
-msgstr "(char) Zeichenpuffer zu klein"
+msgstr "Zeichenpuffer zu klein"
 
 #: py/modbuiltins.c
 msgid "chr() arg not in range(0x110000)"
@@ -2943,7 +2951,7 @@ msgstr "Convolve-Argumente müssen ndarrays sein"
 
 #: extmod/ulab/code/numpy/filter.c
 msgid "convolve arguments must not be empty"
-msgstr "Convolve Argumente dürfen nicht leer sein"
+msgstr "Faltungsargumente dürfen nicht leer sein"
 
 #: extmod/ulab/code/numpy/io/io.c
 msgid "corrupted file"
@@ -2994,8 +3002,8 @@ msgstr "default ist keine Funktion"
 msgid ""
 "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
 msgstr ""
-"Der Zielbuffer muss ein Bytearray oder ein Array vom Typ 'B' für bit_depth = "
+"Zielpuffer muss ein Bytearray oder ein Array vom Typ 'B' für bit_depth = 8 "
-"8 sein"
+"sein"
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
@@ -3055,7 +3063,7 @@ msgstr "leere Sequenz"
 
 #: py/objstr.c
 msgid "end of format while looking for conversion specifier"
-msgstr "Ende des Formats wärend der Suche nach einem conversion specifier"
+msgstr "Ende des Formats bei der Suche nach einem Konvertierungsspezifizierer"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "epoch_time not supported on this board"
@@ -3071,6 +3079,8 @@ msgid ""
 "espcamera.Camera requires reserved PSRAM to be configured. See the "
 "documentation for instructions."
 msgstr ""
+"espcamera.Camera benötigt reservierten PSRAM um konfiguriert zu werden. "
+"Siehe Dokumentation für Anweisungen."
 
 #: py/runtime.c
 msgid "exceptions must derive from BaseException"
@@ -3290,7 +3300,7 @@ msgstr "Index ist außerhalb der Grenzen"
 
 #: shared-bindings/_pixelmap/PixelMap.c
 msgid "index must be tuple or int"
-msgstr ""
+msgstr "Index muss tuple oder int sein"
 
 #: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
 #: ports/espressif/common-hal/pulseio/PulseIn.c
@@ -3482,7 +3492,7 @@ msgstr "issubclass() arg 2 muss eine Klasse oder ein Tupel von Klassen sein"
 
 #: extmod/ulab/code/numpy/linalg/linalg.c
 msgid "iterations did not converge"
-msgstr "Iterationen sind nicht konvergiert (converged)"
+msgstr "Iterationen sind nicht konvergiert"
 
 #: py/objstr.c
 msgid "join expects a list of str/bytes objects consistent with self object"
@@ -3550,7 +3560,7 @@ msgstr "mDNS funktioniert nur mit integriertem WiFi"
 
 #: py/parse.c
 msgid "malformed f-string"
-msgstr "fehlformatierter f-string"
+msgstr "fehlerhafter F-String"
 
 #: shared-bindings/_stage/Layer.c
 msgid "map buffer too small"
@@ -3634,7 +3644,7 @@ msgstr "Mehrfache Vererbung nicht unterstützt"
 
 #: py/emitnative.c
 msgid "must raise an object"
-msgstr "muss ein Objekt verursachen (raise)"
+msgstr "muss ein Objekt aufwerfen (raise)"
 
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
@@ -3654,7 +3664,7 @@ msgstr "native Methode zu groß"
 
 #: py/emitnative.c
 msgid "native yield"
-msgstr "native Ausbeute (yield)"
+msgstr "natives yield"
 
 #: py/runtime.c
 #, c-format
@@ -3667,15 +3677,15 @@ msgstr "negative Fakultät"
 
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
-msgstr "negative Potenz ohne Gleitkomma (float) Unterstützung"
+msgstr "negative Potenz ohne Gleitkomma(float)-Unterstützung"
 
 #: py/objint_mpz.c py/runtime.c
 msgid "negative shift count"
-msgstr "Negative shift Anzahl"
+msgstr "Negative Anzahl an Verschiebungen"
 
 #: shared-bindings/_pixelmap/PixelMap.c
 msgid "nested index must be int"
-msgstr ""
+msgstr "verschachtelter Index muss int sein"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no SD card"
@@ -3683,11 +3693,11 @@ msgstr "keine SD-Karte"
 
 #: py/vm.c
 msgid "no active exception to reraise"
-msgstr "Keine aktive Ausnahme zu verusachen (raise)"
+msgstr "Keine aktive Ausnahme zum Wiederaufwerfen (reraise)"
 
 #: py/compile.c
 msgid "no binding for nonlocal found"
-msgstr "Kein Binding für nonlocal gefunden"
+msgstr "Keine Bindung für nichtlokale Variable gefunden"
 
 #: shared-module/msgpack/__init__.c
 msgid "no default packer"
@@ -3717,7 +3727,7 @@ msgstr "kein solches Attribut"
 #: ports/espressif/common-hal/_bleio/Connection.c
 #: ports/nrf/common-hal/_bleio/Connection.c
 msgid "non-UUID found in service_uuids_whitelist"
-msgstr "non-UUID gefunden in service_uuids_whitelist"
+msgstr "Nicht-UUID in service_uuids_whitelist gefunden"
 
 #: py/compile.c
 msgid "non-default argument follows default argument"
@@ -3733,7 +3743,7 @@ msgstr "Nicht-Schlüsselwort arg nach * / **"
 
 #: py/compile.c
 msgid "non-keyword arg after keyword arg"
-msgstr "Nicht-Schlüsselwort Argument nach Schlüsselwort Argument"
+msgstr "Nicht-Schlüsselwort-Argument nach Schlüsselwort-Argument"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "non-zero timeout must be > 0.01"
@@ -3750,11 +3760,12 @@ msgstr "keine 128-bit UUID"
 #: py/objstr.c
 msgid "not all arguments converted during string formatting"
 msgstr ""
-"Nicht alle Argumente wurden während der Formatierung des Strings konvertiert"
+"Nicht alle Argumente wurden während der Formatierung der Zeichenfolge "
+"konvertiert"
 
 #: py/objstr.c
 msgid "not enough arguments for format string"
-msgstr "Nicht genügend Argumente für den Formatierungs-String"
+msgstr "Nicht genügend Argumente für die Formatzeichenfolge"
 
 #: extmod/ulab/code/numpy/carray/carray_tools.c
 msgid "not implemented for complex dtype"
@@ -3850,11 +3861,11 @@ msgstr "nur Mono wird unterstützt"
 
 #: extmod/ulab/code/numpy/create.c
 msgid "only ndarrays can be concatenated"
-msgstr ""
+msgstr "nur ndarrays können aneinandergehängt werden"
 
 #: ports/stm/common-hal/audiobusio/PDMIn.c
 msgid "only oversample=64 is supported"
-msgstr ""
+msgstr "nur oversample=64 wird unterstützt"
 
 #: ports/nrf/common-hal/audiobusio/PDMIn.c
 #: ports/stm/common-hal/audiobusio/PDMIn.c
@@ -3891,7 +3902,7 @@ msgstr "Operation wird nur für boolesche 1D-Arrays implementiert"
 
 #: extmod/ulab/code/numpy/numerical.c
 msgid "operation is not implemented on ndarrays"
-msgstr "Die Operation ist für ndarrays nicht implementiert"
+msgstr "Operation ist auf ndarrays nicht implementiert"
 
 #: extmod/ulab/code/ndarray.c
 msgid "operation is not supported for given type"
@@ -3943,7 +3954,7 @@ msgstr "Die Parameter müssen Register der Reihenfolge a2 bis a5 sein"
 
 #: py/emitinlinethumb.c
 msgid "parameters must be registers in sequence r0 to r3"
-msgstr "Die Parameter müssen Register der Reihenfolge r0 bis r3 sein"
+msgstr "Parameter müssen Register im Bereich von r0 bis r3 sein"
 
 #: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
 msgid "pixel coordinates out of bounds"
@@ -3984,7 +3995,7 @@ msgstr "pow() drittes Argument darf nicht 0 sein"
 
 #: py/objint_mpz.c
 msgid "pow() with 3 arguments requires integers"
-msgstr "pow() mit 3 Argumenten erfordert Integer"
+msgstr "pow() mit 3 Argumenten erfordert ganze Zahlen"
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 msgid "pull masks conflict with direction masks"
@@ -4016,7 +4027,7 @@ msgstr "Rückgabewert-Beschreibung muss ein Identifier sein"
 
 #: py/emitnative.c
 msgid "return expected '%q' but got '%q'"
-msgstr "Rückgabe erwartet '%q', aber '%q' erhalten"
+msgstr "Rückgabe (return) erwartet '%q', hat aber '%q' erhalten"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
@@ -4026,7 +4037,7 @@ msgstr "rgb_pins[%d] dupliziert eine andere Pinbelegung"
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "rgb_pins[%d] is not on the same port as clock"
-msgstr "rgb_pins [%d] befindet sich nicht am selben Port wie clock"
+msgstr "rgb_pins[%d] befindet sich nicht am selben Port wie clock"
 
 #: extmod/ulab/code/numpy/numerical.c
 msgid "roll argument must be an ndarray"
@@ -4063,7 +4074,7 @@ msgstr "kurze Lektüre"
 
 #: py/objstr.c
 msgid "sign not allowed in string format specifier"
-msgstr "Vorzeichen nicht erlaubt in einem String formatierungs specifier"
+msgstr "Vorzeichen im Zeichenfolgenformatbezeichner nicht zulässig"
 
 #: py/objstr.c
 msgid "sign not allowed with integer format specifier 'c'"
@@ -4095,7 +4106,7 @@ msgstr "weicher reboot\n"
 
 #: extmod/ulab/code/numpy/numerical.c
 msgid "sort argument must be an ndarray"
-msgstr "sortierungs Argument muss ein ndarray sein"
+msgstr "Sortierungsargument muss ein ndarray sein"
 
 #: extmod/ulab/code/scipy/signal/signal.c
 msgid "sos array must be of shape (n_section, 6)"
@@ -4215,7 +4226,7 @@ msgstr "zu viele Lokale für die native Methode"
 #: py/runtime.c
 #, c-format
 msgid "too many values to unpack (expected %d)"
-msgstr "zu viele Werte zum Auspacken (erwartet %d)"
+msgstr "zu viele Werte zum Auspacken (%d erwartet)"
 
 #: extmod/ulab/code/numpy/approx.c
 msgid "trapz is defined for 1D arrays of equal length"
@@ -4249,7 +4260,7 @@ msgstr "Typ ist kein akzeptierter Basis-Typ"
 
 #: py/objgenerator.c py/runtime.c
 msgid "type object '%q' has no attribute '%q'"
-msgstr "Typ vom Objekt '%q' hat kein Attribut '%q'"
+msgstr "Typ-Objekt '%q' hat kein Attribut '%q'"
 
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
@@ -4279,7 +4290,7 @@ msgstr "unerwartetes Schlüsselwort-Argument '%q'"
 
 #: py/lexer.c
 msgid "unicode name escapes"
-msgstr "Unicode Name ausgebrochen (escaped)"
+msgstr "Escaping von Unicode-Namen"
 
 #: py/parse.c
 msgid "unindent doesn't match any outer indent level"
@@ -4288,7 +4299,7 @@ msgstr "unindent stimmt mit keiner äußeren Einrückungsebene überein"
 #: py/objstr.c
 #, c-format
 msgid "unknown conversion specifier %c"
-msgstr "unbekannter Konvertierungs specifier %c"
+msgstr "unbekannter Konvertierungsspezifizierer %c"
 
 #: py/objstr.c
 msgid "unknown format code '%c' for object of type '%q'"
@@ -4305,7 +4316,7 @@ msgstr "unbekannter Typ '%q'"
 #: py/objstr.c
 #, c-format
 msgid "unmatched '%c' in format"
-msgstr ""
+msgstr "'%c' in Format konnte nicht zugeordnet werden"
 
 #: py/objtype.c py/runtime.c
 msgid "unreadable attribute"
@@ -4458,6 +4469,9 @@ msgstr "zi muss eine Gleitkommazahl sein"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi muss die Form (n_section, 2) haben"
 
+#~ msgid "64 bit types"
+#~ msgstr "64 bit-Typen"
+
 #~ msgid "No key was specified"
 #~ msgstr "Es wurde kein Schlüssel angegeben"
 

locale/el.po

@@ -408,11 +408,6 @@ msgstr "0.0 σε μία σύνθετη δύναμη"
 msgid "3-arg pow() not supported"
 msgstr "pow() με 3 παραμέτρους δεν υποστηρίζεται"
 
-#: shared-module/msgpack/__init__.c
-#, fuzzy
-msgid "64 bit types"
-msgstr "64 bit τύποι"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1292,6 +1287,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr ""
@@ -4390,6 +4389,10 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#, fuzzy
+#~ msgid "64 bit types"
+#~ msgstr "64 bit τύποι"
+
 #~ msgid "%q pin invalid"
 #~ msgstr "%q άκυρο pin"
 

locale/en_GB.po

@@ -407,10 +407,6 @@ msgstr "0.0 to a complex power"
 msgid "3-arg pow() not supported"
 msgstr "3-arg pow() not supported"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "64 bit types"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1284,6 +1280,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr "Invalid data_pins[%d]"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Invalid format chunk size"
@@ -4393,6 +4393,9 @@ msgstr "zi must be of float type"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi must be of shape (n_section, 2)"
 
+#~ msgid "64 bit types"
+#~ msgstr "64 bit types"
+
 #~ msgid "No key was specified"
 #~ msgstr "No key was specified"
 

locale/es.po

@@ -415,10 +415,6 @@ msgstr "0.0 a una potencia compleja"
 msgid "3-arg pow() not supported"
 msgstr "pow() con 3 argumentos no soportado"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "tipos de 64 bit"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1317,6 +1313,10 @@ msgstr "byte %.*s Inválido"
 msgid "Invalid data_pins[%d]"
 msgstr "Inválidos los data_pins[%d]"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Formato de fragmento de formato no válido"
@@ -4466,6 +4466,9 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 
+#~ msgid "64 bit types"
+#~ msgstr "tipos de 64 bit"
+
 #~ msgid "No key was specified"
 #~ msgstr "No se especificó ninguna llave"
 

locale/fil.po

@@ -402,10 +402,6 @@ msgstr "0.0 para sa complex power"
 msgid "3-arg pow() not supported"
 msgstr "3-arg pow() hindi suportado"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1283,6 +1279,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Mali ang format ng chunk size"

locale/fr.po

@@ -412,10 +412,6 @@ msgstr "0.0 à une puissance complexe"
 msgid "3-arg pow() not supported"
 msgstr "pow() non supporté avec 3 paramètres"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "types à 64 bit"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1323,6 +1319,10 @@ msgstr "Octet invalide %.*s"
 msgid "Invalid data_pins[%d]"
 msgstr "data_pins[%d] invalide"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Taille de bloc de formatage invalide"
@@ -4485,6 +4485,9 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "64 bit types"
+#~ msgstr "types à 64 bit"
+
 #~ msgid "No key was specified"
 #~ msgstr "Aucune clé n'a été spécifiée"
 

locale/hi.po

@@ -400,10 +400,6 @@ msgstr ""
 msgid "3-arg pow() not supported"
 msgstr ""
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1271,6 +1267,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr ""

locale/it_IT.po

@@ -405,10 +405,6 @@ msgstr "0.0 elevato alla potenza di un numero complesso"
 msgid "3-arg pow() not supported"
 msgstr "pow() con tre argmomenti non supportata"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "Tipo 64 bits"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1285,6 +1281,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr ""
@@ -4415,6 +4415,9 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "64 bit types"
+#~ msgstr "Tipo 64 bits"
+
 #~ msgid "too many arguments provided with the given format"
 #~ msgstr "troppi argomenti forniti con il formato specificato"
 

locale/ja.po

@@ -407,10 +407,6 @@ msgstr "0.0を複素数でべき乗"
 msgid "3-arg pow() not supported"
 msgstr "引数3つのpow()は非対応"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1284,6 +1280,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "フォーマットチャンクのサイズが不正"

locale/ko.po

@@ -401,10 +401,6 @@ msgstr ""
 msgid "3-arg pow() not supported"
 msgstr ""
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1274,6 +1270,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "형식 청크 크기가 잘못되었습니다"

locale/nl.po

@@ -400,10 +400,6 @@ msgstr "0.0 tot een complexe macht"
 msgid "3-arg pow() not supported"
 msgstr "3-arg pow() niet ondersteund"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1279,6 +1275,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Ongeldig formaat stuk grootte"

locale/pl.po

@@ -402,10 +402,6 @@ msgstr "0.0 do potęgi zespolonej"
 msgid "3-arg pow() not supported"
 msgstr "3-argumentowy pow() jest niewspierany"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1279,6 +1275,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr ""
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Zła wielkość fragmentu formatu"

locale/pt_BR.po

@@ -417,10 +417,6 @@ msgstr "0,0 para uma potência complexa"
 msgid "3-arg pow() not supported"
 msgstr "3-arg pow() não compatível"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "Tipos 64 bit"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1313,6 +1309,10 @@ msgstr "Byte %.*s inválido"
 msgid "Invalid data_pins[%d]"
 msgstr "data_pins[%d] inválido"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Tamanho do pedaço de formato inválido"
@@ -4466,6 +4466,9 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "64 bit types"
+#~ msgstr "Tipos 64 bit"
+
 #~ msgid "No key was specified"
 #~ msgstr "Nenhuma chave foi definida"
 

locale/ru.po

@@ -407,10 +407,6 @@ msgstr "0.0 в комплексную степень"
 msgid "3-arg pow() not supported"
 msgstr "3-аргументный pow() не поддерживается"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "64-битные типы"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1316,6 +1312,10 @@ msgstr "Неверный байт %.*s"
 msgid "Invalid data_pins[%d]"
 msgstr "Неверный data_pins[%d]"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Неверный размер блока формата"
@@ -4430,6 +4430,9 @@ msgstr "zi должно быть типа float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi должен иметь форму (n_section, 2)"
 
+#~ msgid "64 bit types"
+#~ msgstr "64-битные типы"
+
 #~ msgid "No key was specified"
 #~ msgstr "Ключ не был указан"
 

locale/sv.po

@@ -414,10 +414,6 @@ msgstr "0,0 till ett komplext nummer"
 msgid "3-arg pow() not supported"
 msgstr "3-arguments pow() stöds inte"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "64-bitars typer"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1298,6 +1294,10 @@ msgstr "Ogiltig byte %.*s"
 msgid "Invalid data_pins[%d]"
 msgstr "Ogiltig data_pins[%d]"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Ogiltig formatsegmentstorlek"
@@ -4428,6 +4428,9 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 
+#~ msgid "64 bit types"
+#~ msgstr "64-bitars typer"
+
 #~ msgid "No key was specified"
 #~ msgstr "Ingen nyckel angavs"
 

locale/tr.po

@@ -409,10 +409,6 @@ msgstr "0.0'dan bir karmaşık güce"
 msgid "3-arg pow() not supported"
 msgstr "3-argümanlı pow() desteklenmemektedir"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "64 bit tipler"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1290,6 +1286,10 @@ msgstr ""
 msgid "Invalid data_pins[%d]"
 msgstr "Geçersiz veri_pini [%d]"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Geçersiz biçim yığın boyutu"
@@ -4389,6 +4389,9 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "64 bit types"
+#~ msgstr "64 bit tipler"
+
 #~ msgid "%q pin invalid"
 #~ msgstr "%q pini geçersiz"
 

locale/zh_Latn_pinyin.po

@@ -416,10 +416,6 @@ msgstr "0.0 de fùshù cì mì"
 msgid "3-arg pow() not supported"
 msgstr "bù zhī chí 3-arg pow()"
 
-#: shared-module/msgpack/__init__.c
-msgid "64 bit types"
-msgstr "64 wèi lèixíng"
-
 #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -1305,6 +1301,10 @@ msgstr "wú xiào zì jié %.*s"
 msgid "Invalid data_pins[%d]"
 msgstr "wú xiào data_pins[%d]"
 
+#: shared-module/msgpack/__init__.c
+msgid "Invalid format"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
 msgstr "Géshì kuài dàxiǎo wúxiào"
@@ -4434,6 +4434,9 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 
+#~ msgid "64 bit types"
+#~ msgstr "64 wèi lèixíng"
+
 #~ msgid "No key was specified"
 #~ msgstr "Wèi zhǐdìng mì yào"
 

ports/espressif/bindings/espnow/ESPNow.c

@@ -53,7 +53,7 @@ static void espnow_check_for_deinit(espnow_obj_t *self) {
 //| class ESPNow:
 //|     """Provides access to the ESP-NOW protocol."""
 //|
-//|     def __init__(self, buffer_size: Optional[int], phy_rate: Optional[int]) -> None:
+//|     def __init__(self, buffer_size: int = 526, phy_rate: int = 0) -> None:
 //|         """Allocate and initialize `ESPNow` instance as a singleton.
 //|
 //|         :param int buffer_size: The size of the internal ring buffer. Default: 526 bytes.

ports/espressif/bindings/espnow/Peer.c

@@ -40,10 +40,11 @@
 //|     def __init__(
 //|         self,
 //|         mac: bytes,
+//|         *,
 //|         lmk: Optional[bytes],
 //|         channel: int = 0,
 //|         interface: int = 0,
-//|         encrypt: bool = False,
+//|         encrypted: bool = False,
 //|     ) -> None:
 //|         """Construct a new peer object.
 //|
@@ -51,17 +52,17 @@
 //|         :param bytes lmk: The Local Master Key (lmk) of the peer.
 //|         :param int channel: The peer's channel. Default: 0 ie. use the current channel.
 //|         :param int interface: The WiFi interface to use. Default: 0 ie. STA.
-//|         :param bool encrypt: Whether or not to use encryption.
+//|         :param bool encrypted: Whether or not to use encryption.
 //|         """
 //|         ...
 STATIC mp_obj_t espnow_peer_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *all_args) {
-    enum { ARG_mac, ARG_lmk, ARG_channel, ARG_interface, ARG_encrypt };
+    enum { ARG_mac, ARG_lmk, ARG_channel, ARG_interface, ARG_encrypted };
     static const mp_arg_t allowed_args[] = {
         { MP_QSTR_mac,      MP_ARG_OBJ | MP_ARG_REQUIRED },
-        { MP_QSTR_lmk,      MP_ARG_OBJ, { .u_obj = mp_const_none } },
+        { MP_QSTR_lmk,      MP_ARG_OBJ | MP_ARG_KW_ONLY, { .u_obj = mp_const_none } },
-        { MP_QSTR_channel,  MP_ARG_INT, { .u_obj = mp_const_none } },
+        { MP_QSTR_channel,  MP_ARG_INT | MP_ARG_KW_ONLY, { .u_int = 0 } },
-        { MP_QSTR_interface,MP_ARG_INT, { .u_obj = mp_const_none } },
+        { MP_QSTR_interface,MP_ARG_INT | MP_ARG_KW_ONLY, { .u_int = 0 } },
-        { MP_QSTR_encrypt,  MP_ARG_BOOL,{ .u_obj = mp_const_none } },
+        { MP_QSTR_encrypted,MP_ARG_BOOL | MP_ARG_KW_ONLY, { .u_bool = false } },
     };
 
     mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
@@ -77,20 +78,11 @@ STATIC mp_obj_t espnow_peer_make_new(const mp_obj_type_t *type, size_t n_args, s
 
     memcpy(self->peer_info.peer_addr, common_hal_espnow_get_bytes_len(args[ARG_mac].u_obj, ESP_NOW_ETH_ALEN), ESP_NOW_ETH_ALEN);
 
-    const mp_obj_t channel = args[ARG_channel].u_obj;
+    self->peer_info.channel = mp_arg_validate_int_range(args[ARG_channel].u_int, 0, 14, MP_QSTR_channel);
-    if (channel != mp_const_none) {
-        self->peer_info.channel = mp_arg_validate_int_range(mp_obj_get_int(channel), 0, 14, MP_QSTR_channel);
-    }
 
-    const mp_obj_t interface = args[ARG_interface].u_obj;
+    self->peer_info.ifidx = (wifi_interface_t)mp_arg_validate_int_range(args[ARG_interface].u_int, 0, 1, MP_QSTR_interface);
-    if (interface != mp_const_none) {
-        self->peer_info.ifidx = (wifi_interface_t)mp_arg_validate_int_range(mp_obj_get_int(interface), 0, 1, MP_QSTR_interface);
-    }
 
-    const mp_obj_t encrypt = args[ARG_encrypt].u_obj;
+    self->peer_info.encrypt = args[ARG_encrypted].u_bool;
-    if (encrypt != mp_const_none) {
-        self->peer_info.encrypt = mp_obj_is_true(encrypt);
-    }
 
     const mp_obj_t lmk = args[ARG_lmk].u_obj;
     if (lmk != mp_const_none) {

ports/espressif/boards/deneyap_kart/mpconfigboard.mk

@@ -1,5 +1,5 @@
-CIRCUITPY_CREATOR_ID =  0x00001209
+CIRCUITPY_CREATOR_ID =  0x19231923
-CIRCUITPY_CREATION_ID = 0x0032D001
+CIRCUITPY_CREATION_ID = 0x00320001
 
 IDF_TARGET = esp32
 

ports/espressif/boards/deneyap_kart_1a/mpconfigboard.mk

@@ -1,5 +1,5 @@
-CIRCUITPY_CREATOR_ID =  0x00001209
+CIRCUITPY_CREATOR_ID =  0x19231923
-CIRCUITPY_CREATION_ID = 0x0032D002
+CIRCUITPY_CREATION_ID = 0x00320002
 
 IDF_TARGET = esp32
 

ports/espressif/boards/deneyap_kart_1a_v2/board.c

@@ -0,0 +1,32 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/deneyap_kart_1a_v2/mpconfigboard.h

@@ -0,0 +1,47 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Deneyap Kart 1A v2"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
+#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
+
+#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO38)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO39)
+
+#define DOUBLE_TAP_PIN (&pin_GPIO34)

ports/espressif/boards/deneyap_kart_1a_v2/mpconfigboard.mk

@@ -0,0 +1,12 @@
+USB_VID = 0x239A
+USB_PID = 0x8148
+
+USB_PRODUCT = "Deneyap Kart 1A v2"
+USB_MANUFACTURER = "Turkish Technology Team Foundation"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+CIRCUITPY_ESPCAMERA = 0

ports/espressif/boards/deneyap_kart_1a_v2/pins.c

@@ -0,0 +1,73 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) },
+
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C_POWER), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
+
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_GPIO17) },
+
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO33) },
+
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO37) },
+
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_GPIO38) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/deneyap_kart_1a_v2/sdkconfig

@@ -0,0 +1,47 @@
+#
+# Component config
+#
+#
+# ESP32S3-Specific
+#
+CONFIG_ESP32S3_SPIRAM_SUPPORT=y
+#
+# SPI RAM config
+#
+# CONFIG_SPIRAM_MODE_QUAD is not set
+CONFIG_SPIRAM_MODE_OCT=y
+# CONFIG_SPIRAM_TYPE_AUTO is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
+CONFIG_SPIRAM_TYPE_ESPPSRAM64=y
+CONFIG_SPIRAM_SIZE=8388608
+#
+# PSRAM Clock and CS IO for ESP32S3
+#
+CONFIG_DEFAULT_PSRAM_CLK_IO=30
+CONFIG_DEFAULT_PSRAM_CS_IO=26
+# end of PSRAM Clock and CS IO for ESP32S3
+
+# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
+# CONFIG_SPIRAM_RODATA is not set
+# CONFIG_SPIRAM_SPEED_120M is not set
+CONFIG_SPIRAM_SPEED_80M=y
+# CONFIG_SPIRAM_SPEED_40M is not set
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+# end of SPI RAM config
+
+# end of ESP32S3-Specific
+
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
+# end of LWIP
+
+# end of Component config

ports/espressif/boards/deneyap_kart_g/mpconfigboard.mk

@@ -1,5 +1,5 @@
-CIRCUITPY_CREATOR_ID =  0x00001209
+CIRCUITPY_CREATOR_ID =  0x19231923
-CIRCUITPY_CREATION_ID = 0x0032D003
+CIRCUITPY_CREATION_ID = 0x00C30001
 
 IDF_TARGET = esp32c3
 

ports/espressif/boards/deneyap_mini/board.c

@@ -0,0 +1,31 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/deneyap_mini/mpconfigboard.h

@@ -0,0 +1,39 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Deneyap Mini"
+#define MICROPY_HW_MCU_NAME         "ESP32S2"
+
+#define CIRCUITPY_BOARD_I2C         (1)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO37, .sda = &pin_GPIO36}}
+
+#define CIRCUITPY_BOARD_SPI         (1)
+#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO38, .mosi = &pin_GPIO40, .miso = &pin_GPIO39}}
+
+#define CIRCUITPY_BOARD_UART        (1)
+#define CIRCUITPY_BOARD_UART_PIN    {{.tx = &pin_GPIO43, .rx = &pin_GPIO44}}

ports/espressif/boards/deneyap_mini/mpconfigboard.mk

@@ -0,0 +1,12 @@
+USB_VID = 0x303A
+USB_PID = 0x8142
+
+USB_PRODUCT = "Deneyap Mini"
+USB_MANUFACTURER = "Turkish Technology Team Foundation"
+
+IDF_TARGET = esp32s2
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+CIRCUITPY_ESPCAMERA = 0

ports/espressif/boards/deneyap_mini/pins.c

@@ -0,0 +1,89 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO44) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO43) },
+
+    { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_GPIO42) },
+
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_GPIO41) },
+
+    { MP_ROM_QSTR(MP_QSTR_MO), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO40) },
+
+    { MP_ROM_QSTR(MP_QSTR_MI), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_MC), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO38) },
+
+    { MP_ROM_QSTR(MP_QSTR_SC), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO37) },
+
+    { MP_ROM_QSTR(MP_QSTR_SD), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO26) },
+
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_GPIO21) },
+
+    { MP_ROM_QSTR(MP_QSTR_DA1), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_DAC1), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_DA0), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_GPIO17) },
+
+    { MP_ROM_QSTR(MP_QSTR_BT), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_GPKEY), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_LEDB), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_LEDG), MP_ROM_PTR(&pin_GPIO33) },
+
+    { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_LEDR), MP_ROM_PTR(&pin_GPIO34) },
+
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_T0), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_T1), MP_ROM_PTR(&pin_GPIO9) },
+
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_T2), MP_ROM_PTR(&pin_GPIO10) },
+
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_T3), MP_ROM_PTR(&pin_GPIO11) },
+
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_T4), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_T5), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/deneyap_mini/sdkconfig

@@ -0,0 +1,4 @@
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="DeneyapMini"
+# end of LWIP

ports/espressif/boards/deneyap_mini_v2/board.c

@@ -0,0 +1,32 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/deneyap_mini_v2/mpconfigboard.h

@@ -0,0 +1,39 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Deneyap Mini v2"
+#define MICROPY_HW_MCU_NAME         "ESP32S2"
+
+#define CIRCUITPY_BOARD_I2C         (1)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO37, .sda = &pin_GPIO36}}
+
+#define CIRCUITPY_BOARD_SPI         (1)
+#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO38, .mosi = &pin_GPIO40, .miso = &pin_GPIO39}}
+
+#define CIRCUITPY_BOARD_UART        (1)
+#define CIRCUITPY_BOARD_UART_PIN    {{.tx = &pin_GPIO43, .rx = &pin_GPIO44}}

ports/espressif/boards/deneyap_mini_v2/mpconfigboard.mk

@@ -0,0 +1,11 @@
+USB_VID = 0x303A
+USB_PID = 0x8145
+
+USB_PRODUCT = "Deneyap Mini v2"
+USB_MANUFACTURER = "Turkish Technology Team Foundation"
+
+IDF_TARGET = esp32s2
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB

ports/espressif/boards/deneyap_mini_v2/pins.c

@@ -0,0 +1,85 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO44) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO43) },
+
+    { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_PWM0), MP_ROM_PTR(&pin_GPIO42) },
+
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_PWM1), MP_ROM_PTR(&pin_GPIO41) },
+
+    { MP_ROM_QSTR(MP_QSTR_MO), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO40) },
+
+    { MP_ROM_QSTR(MP_QSTR_MI), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_MC), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO38) },
+
+    { MP_ROM_QSTR(MP_QSTR_SC), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO37) },
+
+    { MP_ROM_QSTR(MP_QSTR_SD), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO26) },
+
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_GPIO21) },
+
+    { MP_ROM_QSTR(MP_QSTR_DA1), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_DAC1), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_DA0), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_GPIO17) },
+
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_GPKEY), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_RGBLED), MP_ROM_PTR(&pin_GPIO33) },
+
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_T0), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_T1), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_T2), MP_ROM_PTR(&pin_GPIO9) },
+
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_T3), MP_ROM_PTR(&pin_GPIO10) },
+
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_T4), MP_ROM_PTR(&pin_GPIO11) },
+
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_T5), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_T6), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/deneyap_mini_v2/sdkconfig

@@ -0,0 +1,37 @@
+CONFIG_ESP32S2_SPIRAM_SUPPORT=y
+#
+# SPI RAM config
+#
+# CONFIG_SPIRAM_TYPE_AUTO is not set
+CONFIG_SPIRAM_TYPE_ESPPSRAM16=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
+CONFIG_SPIRAM_SIZE=2097152
+# end of SPI RAM config
+
+CONFIG_DEFAULT_PSRAM_CLK_IO=30
+#
+# PSRAM clock and cs IO for ESP32S2
+#
+CONFIG_DEFAULT_PSRAM_CS_IO=26
+# end of PSRAM clock and cs IO for ESP32S2
+
+# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
+# CONFIG_SPIRAM_RODATA is not set
+# CONFIG_SPIRAM_SPEED_80M is not set
+CONFIG_SPIRAM_SPEED_40M=y
+# CONFIG_SPIRAM_SPEED_26M is not set
+# CONFIG_SPIRAM_SPEED_20M is not set
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="DeneyapMini_v2"
+# end of LWIP

ports/espressif/boards/m5stack_atoms3_lite/board.c

@@ -0,0 +1,29 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/m5stack_atoms3_lite/mpconfigboard.h

@@ -0,0 +1,36 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "M5Stack AtomS3 Lite"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO35)
+
+#define CIRCUITPY_BOARD_I2C         (2)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO39, .sda = &pin_GPIO38}, \
+                                     {.scl = &pin_GPIO1, .sda = &pin_GPIO2}}

ports/espressif/boards/m5stack_atoms3_lite/mpconfigboard.mk

@@ -0,0 +1,11 @@
+USB_VID = 0x303A
+USB_PID = 0x815F
+USB_PRODUCT = "M5Stack AtomS3 Lite"
+USB_MANUFACTURER = "M5Stack"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 8MB
+CIRCUITPY_ESPCAMERA = 0

ports/espressif/boards/m5stack_atoms3_lite/pins.c

@@ -0,0 +1,42 @@
+#include "shared-bindings/board/__init__.h"
+
+CIRCUITPY_BOARD_BUS_SINGLETON(porta_i2c, i2c, 1)
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_PORTA_SCL), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_PORTA_SDA), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO2) },
+
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
+
+    { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
+
+
+    { MP_ROM_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_GPIO38) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_BTN), MP_ROM_PTR(&pin_GPIO41) },
+
+    { MP_ROM_QSTR(MP_QSTR_IR_LED), MP_ROM_PTR(&pin_GPIO4) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_PORTA_I2C), MP_ROM_PTR(&board_porta_i2c_obj) },
+};
+
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/m5stack_atoms3_lite/sdkconfig

@@ -0,0 +1,7 @@
+CONFIG_ESP32S3_SPIRAM_SUPPORT=n
+
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
+# end of LWIP

ports/mimxrt10xx/common-hal/audiobusio/I2SOut.h

@@ -26,16 +26,13 @@
 
 #pragma once
 
+// Some boards don't implement I2SOut, so suppress any routines from here.
+#if CIRCUITPY_AUDIOBUSIO_I2SOUT
 #include "supervisor/background_callback.h"
 #include "common-hal/microcontroller/Pin.h"
 
 #include "common-hal/audiobusio/__init__.h"
 
-// Some boards don't implement I2SOut, so suppress any routines from here.
-#if CIRCUITPY_AUDIOBUSIO_I2SOUT
-
-#include "sdk/drivers/sai/fsl_sai.h"
-
 typedef struct {
     mp_obj_base_t base;
     i2s_t i2s;

ports/mimxrt10xx/common-hal/audiobusio/__init__.c

@@ -42,18 +42,23 @@
 
 /*
  * AUDIO PLL setting: Frequency = Fref * (DIV_SELECT + NUM / DENOM)
- *                              = 24 * (32 + 77/100)
+ *                              = 24 * (32 + 96 / 125) = 24 * (32.768)
- *                              = 786.48 MHz
+ *                              = 786.432 MHz = 48kHz * 16384
+ *
+ * This default clocking is used during initial configuration; it also works well for
+ * frequencies that evenly divide 192kHz, such as 8/12/24/48kHz. However, it doesn't work
+ * well for 44.1/22/11kHz, so there's the possibility of using a different
+ * setting when playing a particular sample.
  */
 const clock_audio_pll_config_t audioPllConfig = {
     .loopDivider = 32,  /* PLL loop divider. Valid range for DIV_SELECT divider value: 27~54. */
     .postDivider = 1,   /* Divider after the PLL, should only be 1, 2, 4, 8, 16. */
-    .numerator = 77,    /* 30 bit numerator of fractional loop divider. */
+    .numerator = 96,    /* 30 bit numerator of fractional loop divider. */
-    .denominator = 100, /* 30 bit denominator of fractional loop divider */
+    .denominator = 125, /* 30 bit denominator of fractional loop divider */
 };
 
 static I2S_Type *const i2s_instances[] = I2S_BASE_PTRS;
-static uint8_t i2s_in_use;
+static uint8_t i2s_in_use, i2s_playing;
 
 static I2S_Type *SAI_GetPeripheral(int idx) {
     if (idx < 0 || idx >= (int)MP_ARRAY_SIZE(i2s_instances)) {
@@ -344,7 +349,11 @@ void port_i2s_deinit(i2s_t *self) {
     }
     SAI_TransferAbortSend(self->peripheral, &self->handle);
     i2s_clock_off(self->peripheral);
-    i2s_in_use &= ~(1 << SAI_GetInstance(self->peripheral));
+
+    uint32_t instance_mask = 1 << SAI_GetInstance(self->peripheral);
+    i2s_in_use &= ~instance_mask;
+    i2s_playing &= ~instance_mask;
+
     if (!i2s_in_use) {
         CCM_ANALOG->PLL_AUDIO = CCM_ANALOG_PLL_AUDIO_BYPASS_MASK | CCM_ANALOG_PLL_AUDIO_POWERDOWN_MASK | CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC(kCLOCK_PllClkSrc24M);
     }
@@ -354,13 +363,51 @@ void port_i2s_deinit(i2s_t *self) {
     }
 }
 
+static uint32_t gcd(uint32_t a, uint32_t b) {
+    while (b) {
+        uint32_t tmp = a % b;
+        a = b;
+        b = tmp;
+    }
+    return a;
+}
+
+static void set_sai_clocking_for_sample_rate(uint32_t sample_rate) {
+    mp_arg_validate_int_range((mp_uint_t)sample_rate, 4000, 192000, MP_QSTR_sample_rate);
+
+    uint32_t target_rate = sample_rate;
+    // ensure the PWM rate of MQS will be adequately high
+    while (target_rate < 175000) {
+        target_rate <<= 1;
+    }
+    target_rate *= 4096; // various prescalers divide by this much
+    uint32_t div = gcd(target_rate % 24000000, 24000000);
+    clock_audio_pll_config_t config = {
+        .loopDivider = target_rate / 24000000,
+        .postDivider = 1,
+        .numerator = (target_rate % 24000000) / div,
+        .denominator = 24000000 / div,
+    };
+    CLOCK_InitAudioPll(&config);
+}
+
 void port_i2s_play(i2s_t *self, mp_obj_t sample, bool loop) {
     self->sample = sample;
     self->loop = loop;
     self->bytes_per_sample = audiosample_bits_per_sample(sample) / 8;
     self->channel_count = audiosample_channel_count(sample);
+    int instance = SAI_GetInstance(self->peripheral);
+    i2s_playing |= (1 << instance);
     uint32_t sample_rate = audiosample_sample_rate(sample);
     if (sample_rate != self->sample_rate) {
+        if (__builtin_popcount(i2s_playing) <= 1) {
+            // as this is the first/only i2s instance playing audio, we can
+            // safely change the overall clock used by the SAI peripheral, to
+            // get more accurate frequency reproduction. If another i2s
+            // instance is playing, then we can't touch the audio PLL and have
+            // to live with what we can get, which may be inaccurate
+            set_sai_clocking_for_sample_rate(sample_rate);
+        }
         SAI_TxSetBitClockRate(self->peripheral, SAI_CLOCK_FREQ, sample_rate, 16, 2);
         self->sample_rate = sample_rate;
     }

ports/mimxrt10xx/common-hal/audiopwmio/PWMAudioOut.c

@@ -0,0 +1,158 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Jeff Epler for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include "mpconfigport.h"
+
+#include "py/gc.h"
+#include "py/mperrno.h"
+#include "py/runtime.h"
+#include "common-hal/audiobusio/__init__.h"
+#include "common-hal/audiopwmio/PWMAudioOut.h"
+#include "shared-bindings/audiopwmio/PWMAudioOut.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "supervisor/shared/translate/translate.h"
+#include "supervisor/shared/tick.h"
+
+// Where required we use identifier names that are required by NXP's
+// API, even though they do not conform to the naming standards that Adafruit
+// strives to adhere to. https://www.adafruit.com/blacklivesmatter
+#include "sdk/drivers/sai/fsl_sai.h"
+
+STATIC void config_periph_pin(const mcu_periph_obj_t *periph) {
+    if (!periph) {
+        return;
+    }
+    if (periph->pin->mux_reg) {
+        IOMUXC_SetPinMux(
+            periph->pin->mux_reg, periph->mux_mode,
+            periph->input_reg, periph->input_idx,
+            0,
+            1);
+    }
+
+    IOMUXC_SetPinConfig(0, 0, 0, 0,
+        periph->pin->cfg_reg,
+        IOMUXC_SW_PAD_CTL_PAD_HYS(0)
+        | IOMUXC_SW_PAD_CTL_PAD_PUS(0)
+        | IOMUXC_SW_PAD_CTL_PAD_PUE(0)
+        | IOMUXC_SW_PAD_CTL_PAD_PKE(1)
+        | IOMUXC_SW_PAD_CTL_PAD_ODE(0)
+        | IOMUXC_SW_PAD_CTL_PAD_SPEED(2)
+        | IOMUXC_SW_PAD_CTL_PAD_DSE(4)
+        | IOMUXC_SW_PAD_CTL_PAD_SRE(0));
+}
+
+static void config_mqs(void) {
+    CCM->CCGR0 = (CCM->CCGR0 & (~CCM_CCGR0_CG2_MASK)) | CCM_CCGR0_CG2(3);       /* Enable MQS hmclk. */
+
+    IOMUXC_MQSEnterSoftwareReset(IOMUXC_GPR, true);                             /* Reset MQS. */
+    IOMUXC_MQSEnterSoftwareReset(IOMUXC_GPR, false);                            /* Release reset MQS. */
+    IOMUXC_MQSEnable(IOMUXC_GPR, true);                                         /* Enable MQS. */
+    IOMUXC_MQSConfig(IOMUXC_GPR, kIOMUXC_MqsPwmOverSampleRate64, 0u);           /* 98.304MHz/64/(0+1) = 1.536MHz
+                                                                                Higher frequency PWM involves less low frequen cy harmonic.*/
+
+}
+
+// Caller validates that pins are free.
+void common_hal_audiopwmio_pwmaudioout_construct(audiopwmio_pwmaudioout_obj_t *self,
+    const mcu_pin_obj_t *left_channel, const mcu_pin_obj_t *right_channel, uint16_t default_value) {
+
+    int instance = -1;
+    const mcu_periph_obj_t *left_periph = find_pin_function(mcu_mqs_left_list, left_channel, &instance, MP_QSTR_left_channel);
+    const mcu_periph_obj_t *right_periph = find_pin_function(mcu_mqs_right_list, right_channel, &instance, MP_QSTR_right_channel);
+
+    sai_transceiver_t config;
+    SAI_GetClassicI2SConfig(&config, kSAI_WordWidth16bits, kSAI_Stereo, 1U << 0u);
+    config.frameSync.frameSyncEarly = false;
+    config.frameSync.frameSyncPolarity = kSAI_PolarityActiveHigh;
+    // config.syncMode = kSAI_ModeAsync;
+    config.fifo.fifoPacking = kSAI_FifoPackingDisabled;
+    // These identifier names are required by NXP's API, even though they do
+    // not conform to the naming standards that Adafruit strives to adhere to.
+    // https://www.adafruit.com/blacklivesmatter
+    // config.masterSlave = kSAI_Master;
+    port_i2s_initialize(&self->i2s, instance, &config);
+
+    self->left_channel = left_channel;
+    self->right_channel = right_channel;
+    claim_pin(left_channel);
+    claim_pin(right_channel);
+    config_periph_pin(left_periph);
+    config_periph_pin(right_periph);
+    config_mqs();
+}
+
+bool common_hal_audiopwmio_pwmaudioout_deinited(audiopwmio_pwmaudioout_obj_t *self) {
+    return port_i2s_deinited(&self->i2s);
+}
+
+void common_hal_audiopwmio_pwmaudioout_deinit(audiopwmio_pwmaudioout_obj_t *self) {
+    if (common_hal_audiopwmio_pwmaudioout_deinited(self)) {
+        return;
+    }
+
+    port_i2s_deinit(&self->i2s);
+
+    common_hal_reset_pin(self->left_channel);
+    self->left_channel = NULL;
+
+    common_hal_reset_pin(self->right_channel);
+    self->right_channel = NULL;
+
+    IOMUXC_MQSEnterSoftwareReset(IOMUXC_GPR, true);                             /* Reset MQS. */
+    CCM->CCGR0 = CCM->CCGR0 & (~CCM_CCGR0_CG2_MASK);                            /* Disable MQS hmclk. */
+}
+
+void common_hal_audiopwmio_pwmaudioout_play(audiopwmio_pwmaudioout_obj_t *self,
+    mp_obj_t sample, bool loop) {
+    if (common_hal_audiopwmio_pwmaudioout_get_playing(self)) {
+        common_hal_audiopwmio_pwmaudioout_stop(self);
+    }
+    port_i2s_play(&self->i2s, sample, loop);
+}
+
+void common_hal_audiopwmio_pwmaudioout_pause(audiopwmio_pwmaudioout_obj_t *self) {
+    port_i2s_pause(&self->i2s);
+}
+
+void common_hal_audiopwmio_pwmaudioout_resume(audiopwmio_pwmaudioout_obj_t *self) {
+    port_i2s_resume(&self->i2s);
+}
+
+bool common_hal_audiopwmio_pwmaudioout_get_paused(audiopwmio_pwmaudioout_obj_t *self) {
+    return port_i2s_get_paused(&self->i2s);
+}
+
+void common_hal_audiopwmio_pwmaudioout_stop(audiopwmio_pwmaudioout_obj_t *self) {
+    port_i2s_stop(&self->i2s);
+}
+
+bool common_hal_audiopwmio_pwmaudioout_get_playing(audiopwmio_pwmaudioout_obj_t *self) {
+    return port_i2s_get_playing(&self->i2s);
+}

ports/mimxrt10xx/common-hal/audiopwmio/PWMAudioOut.h

@@ -0,0 +1,41 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Jeff Epler for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#pragma once
+
+#if CIRCUITPY_AUDIOBUSIO_I2SOUT
+#include "supervisor/background_callback.h"
+#include "common-hal/microcontroller/Pin.h"
+
+#include "common-hal/audiobusio/__init__.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    i2s_t i2s;
+    const mcu_pin_obj_t *left_channel, *right_channel;
+} audiopwmio_pwmaudioout_obj_t;
+
+#endif

ports/mimxrt10xx/mpconfigport.mk

@@ -17,6 +17,7 @@ CIRCUITPY_AUDIOCORE = 1
 CIRCUITPY_AUDIOIO = 0
 CIRCUITPY_AUDIOMIXER = 1
 CIRCUITPY_AUDIOMP3 = 1
+CIRCUITPY_AUDIOPWMIO = 1
 CIRCUITPY_BUSDEVICE = 1
 CIRCUITPY_COUNTIO = 0
 CIRCUITPY_FREQUENCYIO = 0

ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.c

@@ -169,25 +169,31 @@ const mcu_pwm_obj_t mcu_pwm_list[20] = {
 
 const mcu_periph_obj_t mcu_sai_rx_bclk_list[] = {
     PERIPH_PIN(1, 0, 0, 0, &pin_GPIO_08),
-    PERIPH_PIN(2, 1, 0, 0, &pin_GPIO_00),
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_00),
 };
 const mcu_periph_obj_t mcu_sai_rx_data0_list[] = {
     PERIPH_PIN(1, 0, 0, 0, &pin_GPIO_03),
-    PERIPH_PIN(2, 1, 0, 0, &pin_GPIO_SD_03),
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_SD_03),
 };
 const mcu_periph_obj_t mcu_sai_rx_sync_list[] = {
     PERIPH_PIN(1, 0, 0, 0, &pin_GPIO_02),
-    PERIPH_PIN(2, 1, 0, 0, &pin_GPIO_SD_04),
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_SD_04),
 };
 const mcu_periph_obj_t mcu_sai_tx_bclk_list[] = {
     PERIPH_PIN(1, 0, 0, 0, &pin_GPIO_06),
-    PERIPH_PIN(2, 1, 0, 0, &pin_GPIO_SD_01),
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_SD_01),
 };
 const mcu_periph_obj_t mcu_sai_tx_data0_list[] = {
     PERIPH_PIN(1, 0, 0, 0, &pin_GPIO_04),
-    PERIPH_PIN(2, 1, 0, 0, &pin_GPIO_SD_02),
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_SD_02),
 };
 const mcu_periph_obj_t mcu_sai_tx_sync_list[] = {
     PERIPH_PIN(1, 0, 0, 0, &pin_GPIO_07),
-    PERIPH_PIN(2, 1, 0, 0, &pin_GPIO_SD_00),
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_SD_00),
+};
+const mcu_periph_obj_t mcu_mqs_left_list[] = {
+    PERIPH_PIN(3, 4, 0, 0, &pin_GPIO_AD_01),
+};
+const mcu_periph_obj_t mcu_mqs_right_list[] = {
+    PERIPH_PIN(3, 4, 0, 0, &pin_GPIO_AD_02),
 };

ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1011/periph.h

@@ -54,4 +54,7 @@ extern const mcu_periph_obj_t mcu_sai_tx_bclk_list[2];
 extern const mcu_periph_obj_t mcu_sai_tx_data0_list[2];
 extern const mcu_periph_obj_t mcu_sai_tx_sync_list[2];
 
+extern const mcu_periph_obj_t mcu_mqs_left_list[1];
+extern const mcu_periph_obj_t mcu_mqs_right_list[1];
+
 #endif // MICROPY_INCLUDED_MIMXRT10XX_MIMXRT1011_PERIPHERALS_MIMXRT1011_PERIPH_H

ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.c

@@ -311,3 +311,13 @@ const mcu_periph_obj_t mcu_sai_tx_sync_list[] = {
     PERIPH_PIN(3, 3, 0, 0, &pin_GPIO_EMC_34),
     PERIPH_PIN(3, 3, 0, 0, &pin_GPIO_SD_B1_07),
 };
+const mcu_periph_obj_t mcu_mqs_left_list[] = {
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_AD_B0_07),
+    PERIPH_PIN(3, 2, 0, 0, &pin_GPIO_EMC_17),
+    PERIPH_PIN(3, 3, 0, 0, &pin_GPIO_EMC_38),
+};
+const mcu_periph_obj_t mcu_mqs_right_list[] = {
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_AD_B0_06),
+    PERIPH_PIN(3, 2, 0, 0, &pin_GPIO_EMC_16),
+    PERIPH_PIN(3, 3, 0, 0, &pin_GPIO_EMC_37),
+};

ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1021/periph.h

@@ -53,3 +53,6 @@ extern const mcu_periph_obj_t mcu_sai_rx_sync_list[7];
 extern const mcu_periph_obj_t mcu_sai_tx_bclk_list[7];
 extern const mcu_periph_obj_t mcu_sai_tx_data0_list[7];
 extern const mcu_periph_obj_t mcu_sai_tx_sync_list[7];
+
+extern const mcu_periph_obj_t mcu_mqs_left_list[3];
+extern const mcu_periph_obj_t mcu_mqs_right_list[3];

ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.c

@@ -362,3 +362,13 @@ const mcu_periph_obj_t mcu_sai_tx_sync_list[] = {
     PERIPH_PIN(3, 3, 0, 0, &pin_GPIO_EMC_39),
     PERIPH_PIN(3, 8, 0, 0, &pin_GPIO_SD_B1_02),
 };
+const mcu_periph_obj_t mcu_mqs_left_list[] = {
+    PERIPH_PIN(3, 3, 0, 0, &pin_GPIO_EMC_14),
+    PERIPH_PIN(3, 2, 0, 0, &pin_GPIO_B0_01),
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_AD_B0_05),
+};
+const mcu_periph_obj_t mcu_mqs_right_list[] = {
+    PERIPH_PIN(3, 3, 0, 0, &pin_GPIO_EMC_13),
+    PERIPH_PIN(3, 2, 0, 0, &pin_GPIO_B0_00),
+    PERIPH_PIN(3, 1, 0, 0, &pin_GPIO_AD_B0_04),
+};

ports/mimxrt10xx/peripherals/mimxrt10xx/MIMXRT1062/periph.h

@@ -54,4 +54,7 @@ extern const mcu_periph_obj_t mcu_sai_tx_bclk_list[7];
 extern const mcu_periph_obj_t mcu_sai_tx_data0_list[7];
 extern const mcu_periph_obj_t mcu_sai_tx_sync_list[7];
 
+extern const mcu_periph_obj_t mcu_mqs_left_list[3];
+extern const mcu_periph_obj_t mcu_mqs_right_list[3];
+
 #endif // MICROPY_INCLUDED_MIMXRT10XX_MIMXRT1062_PERIPHERALS_MIMXRT1011_PERIPH_H

ports/raspberrypi/boards/adafruit_feather_rp2040_dvi/mpconfigboard.h

@@ -1,7 +1,7 @@
 #define MICROPY_HW_BOARD_NAME "Adafruit Feather RP2040 DVI"
 #define MICROPY_HW_MCU_NAME "rp2040"
 
-#define MICROPY_HW_NEOPIXEL (&pin_GPIO16)
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO4)
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO3)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO2)

ports/raspberrypi/boards/adafruit_feather_rp2040_dvi/pins.c

@@ -9,21 +9,7 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO29) },
     { MP_ROM_QSTR(MP_QSTR_D24), MP_ROM_PTR(&pin_GPIO24) },
     { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO25) },
-    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO14) },
-    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO15) },
-    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO8) },
 
-    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO1) },
-    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO1) },
-
-    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO0) },
-    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO0) },
-
-    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) },
-    { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO7) },
-
-    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO2) },
-    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO3) },
     { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
     { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
     { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
@@ -31,10 +17,29 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
     { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
 
-    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
+
     { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
 
     { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) },
+
     { MP_ROM_QSTR(MP_QSTR_CKN), MP_ROM_PTR(&pin_GPIO16) },
     { MP_ROM_QSTR(MP_QSTR_CKP), MP_ROM_PTR(&pin_GPIO17) },
     { MP_ROM_QSTR(MP_QSTR_D0N), MP_ROM_PTR(&pin_GPIO18) },

ports/raspberrypi/boards/adafruit_feather_rp2040_rfm/board.c

@@ -0,0 +1,29 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/raspberrypi/boards/adafruit_feather_rp2040_rfm/mpconfigboard.h

@@ -0,0 +1,14 @@
+#define MICROPY_HW_BOARD_NAME "Adafruit Feather RP2040 RFM"
+#define MICROPY_HW_MCU_NAME "rp2040"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO4)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO3)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO14)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO15)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO8)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO1)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO0)

ports/raspberrypi/boards/adafruit_feather_rp2040_rfm/mpconfigboard.mk

@@ -0,0 +1,9 @@
+USB_VID = 0x239A
+USB_PID = 0x812E
+USB_PRODUCT = "Feather RP2040 RFM"
+USB_MANUFACTURER = "Adafruit"
+
+CHIP_VARIANT = RP2040
+CHIP_FAMILY = rp2
+
+EXTERNAL_FLASH_DEVICES = "GD25Q64C,W25Q64JVxQ"

ports/raspberrypi/boards/adafruit_feather_rp2040_rfm/pico-sdk-configboard.h

@@ -0,0 +1,4 @@
+// Put board-specific pico-sdk definitions here. This file must exist.
+
+// Allow extra time for xosc to start.
+#define PICO_XOSC_STARTUP_DELAY_MULTIPLIER 64

ports/raspberrypi/boards/adafruit_feather_rp2040_rfm/pins.c

@@ -0,0 +1,57 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO28) },
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO29) },
+    { MP_ROM_QSTR(MP_QSTR_D24), MP_ROM_PTR(&pin_GPIO24) },
+    { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO25) },
+
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) },
+
+    { MP_ROM_QSTR(MP_QSTR_RFM_CS), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_RFM_RST), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_RFM_IO5), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_RFM_IO3), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_RFM_IO4), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_RFM_IO0), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_RFM_IO1), MP_ROM_PTR(&pin_GPIO22) },
+    { MP_ROM_QSTR(MP_QSTR_RFM_IO2), MP_ROM_PTR(&pin_GPIO23) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

requirements-doc.txt

@@ -13,6 +13,7 @@ sphinx!=5.2.0.post0
 sphinx-autoapi
 sphinx-rtd-theme
 sphinxcontrib-svg2pdfconverter
+sphinxcontrib-jquery
 readthedocs-sphinx-search
 myst-parser
 

shared-bindings/audiopwmio/PWMAudioOut.c

@@ -56,6 +56,10 @@
 //|         :param int quiescent_value: The output value when no signal is present. Samples should start
 //|             and end with this value to prevent audible popping.
 //|
+//|         **Limitations:** On mimxrt10xx, low sample rates may have an audible
+//|         "carrier" frequency. The manufacturer datasheet states that the "MQS" peripheral
+//|         is intended for 44 kHz or 48kHz input signals.
+//|
 //|         Simple 8ksps 440 Hz sin wave::
 //|
 //|           import audiocore
@@ -114,7 +118,12 @@ STATIC mp_obj_t audiopwmio_pwmaudioout_make_new(const mp_obj_type_t *type, size_
         validate_obj_is_free_pin_or_none(args[ARG_right_channel].u_obj, MP_QSTR_right_channel);
 
     // create AudioOut object from the given pin
-    audiopwmio_pwmaudioout_obj_t *self = m_new_obj(audiopwmio_pwmaudioout_obj_t);
+    // The object is made long-lived because many implementations keep
+    // a pointer to the object (e.g., for the interrupt handler), which
+    // will not work properly if the object is moved. It is created
+    // with a finaliser as some ports use these (rather than 'reset' functions)
+    // to ensure resources are collected at interpreter shutdown.
+    audiopwmio_pwmaudioout_obj_t *self = m_new_ll_obj_with_finaliser(audiopwmio_pwmaudioout_obj_t);
     self->base.type = &audiopwmio_pwmaudioout_type;
     common_hal_audiopwmio_pwmaudioout_construct(self, left_channel_pin, right_channel_pin, args[ARG_quiescent_value].u_int);
 
@@ -249,6 +258,7 @@ MP_PROPERTY_GETTER(audiopwmio_pwmaudioout_paused_obj,
 STATIC const mp_rom_map_elem_t audiopwmio_pwmaudioout_locals_dict_table[] = {
     // Methods
     { MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&audiopwmio_pwmaudioout_deinit_obj) },
+    { MP_ROM_QSTR(MP_QSTR___del__), MP_ROM_PTR(&audiopwmio_pwmaudioout_deinit_obj) },
     { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) },
     { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&audiopwmio_pwmaudioout___exit___obj) },
     { MP_ROM_QSTR(MP_QSTR_play), MP_ROM_PTR(&audiopwmio_pwmaudioout_play_obj) },

shared-bindings/displayio/Bitmap.c

@@ -62,14 +62,11 @@
 //|         ...
 STATIC mp_obj_t displayio_bitmap_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *all_args) {
     mp_arg_check_num(n_args, n_kw, 3, 3, false);
-    uint32_t width = mp_obj_get_int(all_args[0]);
+    uint32_t width = mp_arg_validate_int_range(mp_obj_get_int(all_args[0]), 1, 32767, MP_QSTR_width);
-    uint32_t height = mp_obj_get_int(all_args[1]);
+    uint32_t height = mp_arg_validate_int_range(mp_obj_get_int(all_args[1]), 1, 32767, MP_QSTR_height);
-    uint32_t value_count = mp_obj_get_int(all_args[2]);
+    uint32_t value_count = mp_arg_validate_int_range(mp_obj_get_int(all_args[2]), 1, 65535, MP_QSTR_value_count);
     uint32_t bits = 1;
 
-    if (value_count == 0) {
-        mp_raise_ValueError(translate("value_count must be > 0"));
-    }
     while ((value_count - 1) >> bits) {
         if (bits < 8) {
             bits <<= 1;
@@ -154,28 +151,24 @@ STATIC mp_obj_t bitmap_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t val
     uint16_t x = 0;
     uint16_t y = 0;
     if (mp_obj_is_small_int(index_obj)) {
-        mp_int_t i = MP_OBJ_SMALL_INT_VALUE(index_obj);
+        mp_int_t i = mp_arg_validate_int_min(MP_OBJ_SMALL_INT_VALUE(index_obj), 0, MP_QSTR_index);
         uint16_t width = common_hal_displayio_bitmap_get_width(self);
         x = i % width;
         y = i / width;
     } else {
         mp_obj_t *items;
         mp_obj_get_array_fixed_n(index_obj, 2, &items);
-        x = mp_obj_get_int(items[0]);
+        x = mp_arg_validate_int_range(mp_obj_get_int(items[0]), 0, self->width - 1, MP_QSTR_x);
-        y = mp_obj_get_int(items[1]);
+        y = mp_arg_validate_int_range(mp_obj_get_int(items[1]), 0, self->height - 1, MP_QSTR_y);
-        if (x >= common_hal_displayio_bitmap_get_width(self) || y >= common_hal_displayio_bitmap_get_height(self)) {
-            mp_raise_IndexError(translate("pixel coordinates out of bounds"));
-        }
     }
 
     if (value_obj == MP_OBJ_SENTINEL) {
         // load
         return MP_OBJ_NEW_SMALL_INT(common_hal_displayio_bitmap_get_pixel(self, x, y));
     } else {
-        mp_uint_t value = (mp_uint_t)mp_obj_get_int(value_obj);
+        mp_uint_t value = (mp_uint_t)mp_arg_validate_int_range(
-        if ((value >> common_hal_displayio_bitmap_get_bits_per_value(self)) != 0) {
+            mp_obj_get_int(value_obj), 0,
-            mp_raise_ValueError(translate("pixel value requires too many bits"));
+            (UINT32_MAX >> (32 - common_hal_displayio_bitmap_get_bits_per_value(self))), MP_QSTR_value);
-        }
         common_hal_displayio_bitmap_set_pixel(self, x, y, value);
     }
     return mp_const_none;
@@ -226,8 +219,9 @@ STATIC mp_obj_t displayio_bitmap_obj_blit(size_t n_args, const mp_obj_t *pos_arg
     displayio_bitmap_t *self = MP_OBJ_TO_PTR(pos_args[0]);
     check_for_deinit(self);
 
-    int16_t x = args[ARG_x].u_int;
+    // Check x,y are within self (target) bitmap boundary
-    int16_t y = args[ARG_y].u_int;
+    int16_t x = mp_arg_validate_int_range(args[ARG_x].u_int, 0, self->width - 1, MP_QSTR_x);
+    int16_t y = mp_arg_validate_int_range(args[ARG_y].u_int, 0, self->height - 1, MP_QSTR_y);
 
     displayio_bitmap_t *source = mp_arg_validate_type(args[ARG_source].u_obj, &displayio_bitmap_type, MP_QSTR_source_bitmap);
 
@@ -237,32 +231,21 @@ STATIC mp_obj_t displayio_bitmap_obj_blit(size_t n_args, const mp_obj_t *pos_arg
         mp_raise_ValueError(translate("source palette too large"));
     }
 
-    int16_t x1 = args[ARG_x1].u_int;
+    // Check x1,y1,x2,y2 are within source bitmap boundary
-    int16_t y1 = args[ARG_y1].u_int;
+    int16_t x1 = mp_arg_validate_int_range(args[ARG_x1].u_int, 0, source->width - 1, MP_QSTR_x1);
+    int16_t y1 = mp_arg_validate_int_range(args[ARG_y1].u_int, 0, source->height - 1, MP_QSTR_y1);
     int16_t x2, y2;
     // if x2 or y2 is None, then set as the maximum size of the source bitmap
     if (args[ARG_x2].u_obj == mp_const_none) {
         x2 = source->width;
     } else {
-        x2 = mp_obj_get_int(args[ARG_x2].u_obj);
+        x2 = mp_arg_validate_int_range(mp_obj_get_int(args[ARG_x2].u_obj), 0, source->width, MP_QSTR_x2);
     }
     // int16_t y2;
     if (args[ARG_y2].u_obj == mp_const_none) {
         y2 = source->height;
     } else {
-        y2 = mp_obj_get_int(args[ARG_y2].u_obj);
+        y2 = mp_arg_validate_int_range(mp_obj_get_int(args[ARG_y2].u_obj), 0, source->height, MP_QSTR_y2);
-    }
-
-    // Check x,y are within self (target) bitmap boundary
-    if ((x < 0) || (y < 0) || (x > self->width) || (y > self->height)) {
-        mp_raise_ValueError(translate("out of range of target"));
-    }
-    // Check x1,y1,x2,y2 are within source bitmap boundary
-    if ((x1 < 0) || (x1 > source->width) ||
-        (y1 < 0) || (y1 > source->height) ||
-        (x2 < 0) || (x2 > source->width) ||
-        (y2 < 0) || (y2 > source->height)) {
-        mp_raise_ValueError(translate("out of range of source"));
     }
 
     // Ensure x1 < x2 and y1 < y2
@@ -301,10 +284,7 @@ STATIC mp_obj_t displayio_bitmap_obj_fill(mp_obj_t self_in, mp_obj_t value_obj)
     displayio_bitmap_t *self = MP_OBJ_TO_PTR(self_in);
     check_for_deinit(self);
 
-    mp_uint_t value = (mp_uint_t)mp_obj_get_int(value_obj);
+    mp_uint_t value = (mp_uint_t)mp_arg_validate_int_range(mp_obj_get_int(value_obj), 0,(1u << common_hal_displayio_bitmap_get_bits_per_value(self)) - 1,MP_QSTR_value);
-    if ((value >> common_hal_displayio_bitmap_get_bits_per_value(self)) != 0) {
-        mp_raise_ValueError(translate("pixel value requires too many bits"));
-    }
     common_hal_displayio_bitmap_fill(self, value);
 
     return mp_const_none;

shared-bindings/displayio/Group.c

@@ -56,7 +56,7 @@ STATIC mp_obj_t displayio_group_make_new(const mp_obj_type_t *type, size_t n_arg
     mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
     mp_arg_parse_all_kw_array(n_args, n_kw, all_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
 
-    mp_int_t scale = mp_arg_validate_int_min(args[ARG_scale].u_int, 1, MP_QSTR_scale);
+    mp_int_t scale = mp_arg_validate_int_range(args[ARG_scale].u_int, 1, 32767,MP_QSTR_scale);
 
     displayio_group_t *self = m_new_obj(displayio_group_t);
     self->base.type = &displayio_group_type;

shared-bindings/displayio/Palette.c

@@ -61,7 +61,7 @@ STATIC mp_obj_t displayio_palette_make_new(const mp_obj_type_t *type, size_t n_a
 
     displayio_palette_t *self = m_new_obj(displayio_palette_t);
     self->base.type = &displayio_palette_type;
-    common_hal_displayio_palette_construct(self, args[ARG_color_count].u_int, args[ARG_dither].u_bool);
+    common_hal_displayio_palette_construct(self, mp_arg_validate_int_range(args[ARG_color_count].u_int, 1, 32767, MP_QSTR_color_count), args[ARG_dither].u_bool);
 
     return MP_OBJ_FROM_PTR(self);
 }

shared-module/msgpack/__init__.c

@@ -102,6 +102,16 @@ STATIC uint32_t read4(msgpack_stream_t *s) {
     return res;
 }
 
+STATIC uint64_t read8(msgpack_stream_t *s) {
+    uint64_t res = 0;
+    read(s, &res, 8);
+    int n = 1;
+    if (*(char *)&n == 1) {
+        res = __builtin_bswap64(res);
+    }
+    return res;
+}
+
 STATIC size_t read_size(msgpack_stream_t *s, uint8_t len_index) {
     size_t res = 0;
     switch (len_index) {
@@ -207,7 +217,7 @@ STATIC void pack_bin(msgpack_stream_t *s, const uint8_t *data, size_t len) {
     }
 }
 
-STATIC void  pack_ext(msgpack_stream_t *s, int8_t code, const uint8_t *data, size_t len) {
+STATIC void pack_ext(msgpack_stream_t *s, int8_t code, const uint8_t *data, size_t len) {
     if (len == 1) {
         write1(s, 0xd4);
     } else if (len == 2) {
@@ -424,22 +434,39 @@ STATIC mp_obj_t unpack(msgpack_stream_t *s, mp_obj_t ext_hook, bool use_list) {
             return unpack_bytes(s, read_size(s, code - 0xc4));
         }
         case 0xcc: // uint8
+            return MP_OBJ_NEW_SMALL_INT((uint8_t)read1(s));
         case 0xd0: // int8
             return MP_OBJ_NEW_SMALL_INT((int8_t)read1(s));
         case 0xcd: // uint16
+            return MP_OBJ_NEW_SMALL_INT((uint16_t)read2(s));
         case 0xd1: // int16
             return MP_OBJ_NEW_SMALL_INT((int16_t)read2(s));
         case 0xce: // uint32
+            return mp_obj_new_int_from_uint((uint32_t)read4(s));
         case 0xd2: // int32
-            return MP_OBJ_NEW_SMALL_INT((int32_t)read4(s));
+            return mp_obj_new_int((int32_t)read4(s));
-        case 0xca: {
+        case 0xcf: // uint 64
-            union Float { mp_float_t f;
+            return mp_obj_new_int_from_ull((uint64_t)read8(s));
-                          uint32_t u;
+        case 0xd3: // int 64
+            return mp_obj_new_int_from_ll((int64_t)read8(s));
+        case 0xca: { // float
+            union Float {
+                mp_float_t f;
+                uint32_t u;
             };
             union Float data;
             data.u = read4(s);
             return mp_obj_new_float(data.f);
         }
+        case 0xcb: { // double
+            union Double {
+                uint64_t u;
+                double d;
+            };
+            union Double data;
+            data.u = read8(s);
+            return mp_obj_new_float_from_d(data.d);
+        }
         case 0xd9:
         case 0xda:
         case 0xdb: {
@@ -483,11 +510,8 @@ STATIC mp_obj_t unpack(msgpack_stream_t *s, mp_obj_t ext_hook, bool use_list) {
             // ext 8, 16, 32
             return unpack_ext(s, read_size(s, code - 0xc7), ext_hook);
         case 0xc1:      // never used
-        case 0xcb:      // float 64
-        case 0xcf:      // uint 64
-        case 0xd3:      // int 64
         default:
-            mp_raise_NotImplementedError(translate("64 bit types"));
+            mp_raise_ValueError(translate("Invalid format"));
     }
 }