Merge branch 'adafruit:main' into lilygo_t_display_rp2040

locale/ID.po

@@ -2441,6 +2441,10 @@ msgstr "Tidak dapat memulai parser"
 msgid "Unable to read color palette data"
 msgstr "Tidak dapat membaca data palet warna"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Tidak dapat menulis ke nvm."
@@ -3660,6 +3664,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4108,6 +4120,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/circuitpython.pot

@@ -2408,6 +2408,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3625,6 +3629,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4072,6 +4084,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/cs.po

@@ -2417,6 +2417,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3634,6 +3638,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4081,6 +4093,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/de_DE.po

@@ -2458,6 +2458,10 @@ msgstr "Parser konnte nicht gestartet werden"
 msgid "Unable to read color palette data"
 msgstr "Konnte Farbpalettendaten nicht lesen"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Schreiben in nvm nicht möglich."
@@ -3711,6 +3715,14 @@ msgstr "long int wird in diesem Build nicht unterstützt"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "Loopback + Silent Mode wird vom Peripheriegerät nicht unterstützt"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "fehlformatierter f-string"
@@ -4163,6 +4175,7 @@ msgstr "pow() mit 3 Argumenten erfordert Integer"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/el.po

@@ -2408,6 +2408,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3625,6 +3629,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4072,6 +4084,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/en_GB.po

@@ -2437,6 +2437,10 @@ msgstr "Unable to init parser"
 msgid "Unable to read color palette data"
 msgstr "Unable to read colour palette data"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Unable to write to nvm."
@@ -3660,6 +3664,14 @@ msgstr "long int not supported in this build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "loopback + silent mode not supported by peripheral"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "malformed f-string"
@@ -4107,6 +4119,7 @@ msgstr "pow() with 3 arguments requires integers"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/es.po

@@ -2468,6 +2468,10 @@ msgstr "Incapaz de inicializar el parser"
 msgid "Unable to read color palette data"
 msgstr "No se pudo leer los datos de la paleta de colores"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Imposible escribir en nvm."
@@ -3702,6 +3706,14 @@ msgstr "long int no soportado en esta compilación"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "Loopback + modo silencioso no están soportados por periférico"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "cadena-f mal formada"
@@ -4153,6 +4165,7 @@ msgstr "pow() con 3 argumentos requiere enteros"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/fil.po

@@ -2428,6 +2428,10 @@ msgstr "Hindi ma-init ang parser"
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Hindi ma i-sulat sa NVM."
@@ -3664,6 +3668,14 @@ msgstr "long int hindi sinusuportahan sa build na ito"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4113,6 +4125,7 @@ msgstr "pow() na may 3 argumento kailangan ng integers"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/fr.po

@@ -2484,6 +2484,10 @@ msgstr "Impossible d'initialiser le parser"
 msgid "Unable to read color palette data"
 msgstr "Impossible de lire les données de la palette de couleurs"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Écriture impossible vers nvm."
@@ -3732,6 +3736,14 @@ msgstr "entiers longs non supportés dans cette build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "loopback + silent mode non pris en charge par le périphérique"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "f-string mal formé"
@@ -4184,6 +4196,7 @@ msgstr "pow() avec 3 arguments nécessite des entiers"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/hi.po

@@ -2408,6 +2408,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3625,6 +3629,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4072,6 +4084,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/it_IT.po

@@ -2445,6 +2445,10 @@ msgstr "Inizilizzazione del parser non possibile"
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Imposibile scrivere su nvm."
@@ -3680,6 +3684,14 @@ msgstr "long int non supportata in questa build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4133,6 +4145,7 @@ msgstr "pow() con 3 argomenti richiede interi"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/ja.po

@@ -2423,6 +2423,10 @@ msgstr "パーザを初期化できません"
 msgid "Unable to read color palette data"
 msgstr "カラーパレットデータを読み込めません"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "nvmに書き込みできません"
@@ -3645,6 +3649,14 @@ msgstr "このビルドはlong intに非対応"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "不正な形式のf-string"
@@ -4094,6 +4106,7 @@ msgstr "pow()の第3引数には整数が必要"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/ko.po

@@ -2412,6 +2412,10 @@ msgstr "파서를 초기화(init) 할 수 없습니다"
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3629,6 +3633,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4076,6 +4088,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/nl.po

@@ -2434,6 +2434,10 @@ msgstr "Niet in staat om de parser te initialiseren"
 msgid "Unable to read color palette data"
 msgstr "Niet in staat kleurenpalet data te lezen"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Niet in staat om naar nvm te schrijven."
@@ -3665,6 +3669,14 @@ msgstr "long int wordt niet ondersteund in deze build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "loopback + silent mode wordt niet ondersteund door randapparaat"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "onjuist gevormde f-string"
@@ -4113,6 +4125,7 @@ msgstr "pow() met 3 argumenten vereist integers"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/pl.po

@@ -2419,6 +2419,10 @@ msgstr "Błąd ustawienia parsera"
 msgid "Unable to read color palette data"
 msgstr "Nie można odczytać danych palety"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Błąd zapisu do NVM."
@@ -3637,6 +3641,14 @@ msgstr "long int jest nieobsługiwany"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "źle sformatowany f-string"
@@ -4085,6 +4097,7 @@ msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/pt_BR.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2022-03-19 16:56+0000\n"
+"PO-Revision-Date: 2022-03-21 22:57+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -2479,6 +2479,10 @@ msgstr "Não foi possível iniciar o analisador"
 msgid "Unable to read color palette data"
 msgstr "Não foi possível ler os dados da paleta de cores"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr "Não é possível iniciar a consulta mDNS"
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Não é possível gravar no nvm."
@@ -3722,6 +3726,14 @@ msgstr "o long int não é suportado nesta compilação"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "o loopback + o modo silencioso não é suportado pelo periférico"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr "O mDNS já foi inicializado"
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr "O mDNS só funciona com WiFi integrado"
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "f-string malformado"
@@ -4176,6 +4188,7 @@ msgstr "o pow() com 3 argumentos requer números inteiros"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/ru.po

@@ -2457,6 +2457,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3674,6 +3678,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4121,6 +4133,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/sv.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2022-03-19 16:56+0000\n"
+"PO-Revision-Date: 2022-03-23 08:58+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -2450,6 +2450,10 @@ msgstr "Kan inte initiera tolken"
 msgid "Unable to read color palette data"
 msgstr "Det går inte att läsa färgpalettdata"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr "Det gick inte att starta mDNS-frågan"
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Det gick inte att skriva till nvm."
@@ -3685,6 +3689,14 @@ msgstr "long int stöds inte i denna build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "loopback + tyst läge stöds inte av kringutrustning"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr "mDNS har redan initierats"
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr "mDNS fungerar bara med inbyggt WiFi"
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "f-sträng har felaktigt format"
@@ -4133,6 +4145,7 @@ msgstr "pow() med 3 argument kräver heltal"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/tr.po

@@ -2424,6 +2424,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3641,6 +3645,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4088,6 +4100,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/zh_Latn_pinyin.po

@@ -2460,6 +2460,10 @@ msgstr "Wúfǎ chūshǐhuà jiěxī qì"
 msgid "Unable to read color palette data"
 msgstr "Wúfǎ dúqǔ tiáosèbǎn shùjù"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Wúfǎ xiě rù nvm."
@@ -3694,6 +3698,14 @@ msgstr "cǐ bǎnběn bù zhīchí zhǎng zhěngshù"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "Wài shè bù zhī chí huán huí + jìng yīn mó shì"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "jīxíng de f-string"
@@ -4141,6 +4153,7 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

ports/atmel-samd/boards/aloriumtech_evo_m51/mpconfigboard.h

@@ -9,7 +9,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_PB03)
 
 // BC needed?
-// #define AUTORESET_DELAY_MS 500
 
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code

ports/atmel-samd/boards/circuitbrains_deluxe_m4/mpconfigboard.h

@@ -5,8 +5,6 @@
 
 #define MICROPY_HW_LED_STATUS   (&pin_PB13)
 
-#define AUTORESET_DELAY_MS 500
-
 #define BOARD_HAS_CRYSTAL 1
 
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)

ports/atmel-samd/boards/pycubed/mpconfigboard.h

@@ -6,8 +6,6 @@
 #define MICROPY_HW_LED_STATUS (&pin_PA16)
 #define MICROPY_HW_NEOPIXEL   (&pin_PA21)
 
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

ports/atmel-samd/boards/pycubed_mram/mpconfigboard.h

@@ -9,8 +9,6 @@
 #define EXTERNAL_FLASH_QSPI_SINGLE
 #define EXTERNAL_FLASH_NO_JEDEC
 
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

ports/atmel-samd/boards/pycubed_mram_v05/mpconfigboard.h

@@ -9,8 +9,6 @@
 #define EXTERNAL_FLASH_QSPI_SINGLE
 #define EXTERNAL_FLASH_NO_JEDEC
 
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

ports/atmel-samd/boards/pycubed_v05/mpconfigboard.h

@@ -5,8 +5,6 @@
 
 #define MICROPY_HW_NEOPIXEL   (&pin_PA21)
 
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.h

@@ -6,8 +6,6 @@
 #define MICROPY_HW_LED_STATUS (&pin_PA23)
 #define MICROPY_HW_NEOPIXEL (&pin_PB03)
 
-#define AUTORESET_DELAY_MS 500
-
 #define BOARD_HAS_CRYSTAL 1
 
 #define DEFAULT_SPI_BUS_SCK (&pin_PA17)

ports/espressif/CMakeLists.txt

@@ -6,7 +6,7 @@ set(ENV{IDF_PATH} ${CMAKE_SOURCE_DIR}/esp-idf)
 
 # The component list here determines what options we get in menuconfig and what the ninja file
 # can build.
-set(COMPONENTS esptool_py soc driver log main esp-tls mbedtls esp_event esp_adc_cal esp_netif esp_wifi lwip wpa_supplicant freertos bt)
+set(COMPONENTS esptool_py soc driver log main esp-tls mbedtls mdns esp_event esp_adc_cal esp_netif esp_wifi lwip wpa_supplicant freertos bt)
 
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 project(circuitpython)

ports/espressif/Makefile

@@ -262,6 +262,11 @@ SRC_C += \
 endif
 endif
 
+ifeq ($(IDF_TARGET),esp32c3)
+SRC_C += \
+	supervisor/usb_serial_jtag.c
+endif
+
 $(BUILD)/i2s_lcd_esp32s2_driver.o: CFLAGS += -Wno-sign-compare
 
 ifneq ($(CIRCUITPY_USB),0)
@@ -360,7 +365,7 @@ $(HEADER_BUILD)/qstr.split: | $(BUILD)/esp-idf/config/sdkconfig.h
 BINARY_WIFI_BLOBS = libcoexist.a libcore.a libespnow.a libmesh.a libnet80211.a libpp.a libsmartconfig.a libwapi.a
 BINARY_BLOBS = esp-idf/components/esp_phy/lib/$(IDF_TARGET)/libphy.a $(addprefix esp-idf/components/esp_wifi/lib/$(IDF_TARGET)/, $(BINARY_WIFI_BLOBS))
 
-ESP_IDF_COMPONENTS_LINK = $(IDF_TARGET_ARCH) app_update bootloader_support driver efuse esp_adc_cal esp_common esp_event esp_hw_support esp_ipc esp_netif esp_pm esp_phy esp_ringbuf esp_rom esp_system esp_timer esp-tls esp_wifi freertos hal heap log lwip mbedtls newlib nvs_flash pthread soc spi_flash vfs wpa_supplicant
+ESP_IDF_COMPONENTS_LINK = $(IDF_TARGET_ARCH) app_update bootloader_support driver efuse esp_adc_cal esp_common esp_event esp_hw_support esp_ipc esp_netif esp_pm esp_phy esp_ringbuf esp_rom esp_system esp_timer esp-tls esp_wifi freertos hal heap log lwip mbedtls mdns newlib nvs_flash pthread soc spi_flash vfs wpa_supplicant
 ifneq ($(CIRCUITPY_BLEIO),0)
 	ESP_IDF_COMPONENTS_LINK += bt
 	BINARY_BLOBS += esp-idf/components/esp_phy/lib/$(IDF_TARGET)/libbtbb.a \

ports/espressif/boards/adafruit_esp32s2_camera/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO21)
 #define MICROPY_HW_NEOPIXEL_COUNT (6)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
 

ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)
 

ports/espressif/boards/adafruit_feather_esp32s2_tft/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO34)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO41)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO42)
 

ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)
 

ports/espressif/boards/adafruit_feather_esp32s3_nopsram/board.c

@@ -0,0 +1,50 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "components/driver/include/driver/gpio.h"
+#include "components/hal/include/hal/gpio_hal.h"
+#include "common-hal/microcontroller/Pin.h"
+
+void board_init(void) {
+    reset_board();
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+    // Turn on I2C power by default.
+
+    gpio_set_direction(7, GPIO_MODE_DEF_OUTPUT);
+    gpio_set_level(7, true);
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/adafruit_feather_esp32s3_nopsram/mpconfigboard.h

@@ -0,0 +1,45 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Adafruit Feather ESP32S3 No PSRAM"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
+#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO38)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO39)
+
+#define DOUBLE_TAP_PIN (&pin_GPIO34)

ports/espressif/boards/adafruit_feather_esp32s3_nopsram/mpconfigboard.mk

@@ -0,0 +1,17 @@
+USB_VID = 0x239A
+USB_PID = 0x8114
+USB_PRODUCT = "Adafruit Feather ESP32S3 No PSRAM"
+USB_MANUFACTURER = "Adafruit"
+
+IDF_TARGET = esp32s3
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE=qio
+CIRCUITPY_ESP_FLASH_FREQ=80m
+CIRCUITPY_ESP_FLASH_SIZE=8MB

ports/espressif/boards/adafruit_feather_esp32s3_nopsram/pins.c

@@ -0,0 +1,73 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) },
+
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C_POWER), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
+
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_GPIO17) },
+
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO33) },
+
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO37) },
+
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_GPIO38) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/adafruit_feather_esp32s3_nopsram/sdkconfig

@@ -0,0 +1,7 @@
+CONFIG_ESP32S3_SPIRAM_SUPPORT=n
+
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
+# end of LWIP

ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

@@ -33,12 +33,6 @@
 #define MICROPY_HW_APA102_SCK (&pin_GPIO15)
 #define MICROPY_HW_APA102_COUNT (5)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO33)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO34)
 

ports/espressif/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h

@@ -34,12 +34,6 @@
 #define CIRCUITPY_STATUS_LED_POWER_INVERTED (1)
 #define MICROPY_HW_NEOPIXEL_COUNT (4)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
 

ports/espressif/boards/adafruit_metro_esp32s2/mpconfigboard.h

@@ -31,12 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
 

ports/espressif/boards/adafruit_qtpy_esp32c3/board.c

@@ -0,0 +1,49 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 microDev
+ * Copyright (c) 2021 skieast/Bruce Segal
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/microcontroller/Pin.h"
+#include "supervisor/board.h"
+
+#include "components/driver/include/driver/gpio.h"
+#include "soc/usb_serial_jtag_struct.h"
+
+void board_init(void) {
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
+    return false;
+}
+
+void reset_board(void) {
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.h

@@ -0,0 +1,50 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 microDev
+ * Copyright (c) 2021 skieast/Bruce Segal
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Board setup
+#define MICROPY_HW_BOARD_NAME       "Adafruit QT Py ESP32C3"
+#define MICROPY_HW_MCU_NAME         "ESP32-C3FN4"
+
+// Status LED
+#define MICROPY_HW_NEOPIXEL         (&pin_GPIO2)
+
+#define CIRCUITPY_BOARD_I2C         (1)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO6, .sda = &pin_GPIO5}}
+
+#define CIRCUITPY_BOARD_SPI         (1)
+#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO10, .mosi = &pin_GPIO7, .miso = &pin_GPIO8}}
+
+#define CIRCUITPY_BOARD_UART        (1)
+#define CIRCUITPY_BOARD_UART_PIN    {{.tx = &pin_GPIO21, .rx = &pin_GPIO20}}
+
+// For entering safe mode
+#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO9)
+
+// Explanation of how a user got into safe mode
+#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
+
+#define CIRCUITPY_ESP_USB_SERIAL_JTAG (1)

ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.mk

@@ -0,0 +1,10 @@
+CIRCUITPY_CREATOR_ID =  0x0000239A
+CIRCUITPY_CREATION_ID = 0x00010001
+
+IDF_TARGET = esp32c3
+
+INTERNAL_FLASH_FILESYSTEM = 1
+
+CIRCUITPY_ESP_FLASH_MODE=dio
+CIRCUITPY_ESP_FLASH_FREQ=80m
+CIRCUITPY_ESP_FLASH_SIZE=4MB

ports/espressif/boards/adafruit_qtpy_esp32c3/pins.c

@@ -0,0 +1,85 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 microDev
+ * Copyright (c) 2021 skieast/Bruce Segal
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/board/__init__.h"
+
+#include "shared-bindings/board/__init__.h"
+
+CIRCUITPY_BOARD_BUS_SINGLETON(stemma_i2c, i2c, 1)
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO9) },
+
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_GPIO4) },
+
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO6) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO21) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_GPIO20) },
+
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO10) },
+
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO2) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/adafruit_qtpy_esp32c3/sdkconfig

@@ -0,0 +1,62 @@
+# Automatically generated file. DO NOT EDIT.
+# Espressif IoT Development Framework (ESP-IDF) Project Configuration
+#
+# Bootloader config
+#
+CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
+# CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set
+CONFIG_BOOTLOADER_LOG_LEVEL=0
+# end of Bootloader config
+
+#
+# Serial flasher config
+#
+# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
+# end of Serial flasher config
+
+#
+# Partition Table
+#
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="esp-idf-config/partitions-4MB-no-uf2.csv"
+CONFIG_PARTITION_TABLE_FILENAME="esp-idf-config/partitions-4MB-no-uf2.csv"
+# end of Partition Table
+
+#
+# Compiler options
+#
+# CONFIG_COMPILER_SAVE_RESTORE_LIBCALLS is not set
+# end of Compiler options
+
+#
+# Component config
+#
+#
+# ESP System Settings
+#
+# CONFIG_ESP_SYSTEM_USE_EH_FRAME is not set
+CONFIG_ESP_CONSOLE_SECONDARY_NONE=y
+# CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG is not set
+# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
+# end of ESP System Settings
+
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="Adafruit-QTPy-ESP32C3"
+# end of LWIP
+
+#
+# SPI Flash driver
+#
+# CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
+# end of SPI Flash driver
+
+# end of Component config
+
+#
+# Deprecated options for backward compatibility
+#
+# CONFIG_LOG_BOOTLOADER_LEVEL_INFO is not set
+CONFIG_LOG_BOOTLOADER_LEVEL=0
+# CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG is not set
+# end of Deprecated options for backward compatibility

ports/espressif/boards/adafruit_qtpy_esp32s2/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO39)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO38)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_BOARD_I2C         (2)
 #define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO6, .sda = &pin_GPIO7}, \
                                      {.scl = &pin_GPIO40, .sda = &pin_GPIO41}}

ports/espressif/boards/adafruit_qtpy_esp32s3_nopsram/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO38)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO37)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_BOARD_I2C         (2)
 #define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO6, .sda = &pin_GPIO7}, \
                                      {.scl = &pin_GPIO40, .sda = &pin_GPIO41}}

ports/espressif/boards/ai_thinker_esp32-c3s-2m/mpconfigboard.h

@@ -39,9 +39,3 @@
 // Serial over UART
 #define CIRCUITPY_DEBUG_UART_RX               DEFAULT_UART_BUS_RX
 #define CIRCUITPY_DEBUG_UART_TX               DEFAULT_UART_BUS_TX
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO9)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/ai_thinker_esp32-c3s/mpconfigboard.h

@@ -39,9 +39,3 @@
 // Serial over UART
 #define CIRCUITPY_DEBUG_UART_RX               DEFAULT_UART_BUS_RX
 #define CIRCUITPY_DEBUG_UART_TX               DEFAULT_UART_BUS_TX
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO9)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/ai_thinker_esp_12k_nodemcu/mpconfigboard.h

@@ -32,9 +32,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 // #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/artisense_rd00/mpconfigboard.h

@@ -33,11 +33,5 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_UART_BUS_RX (&pin_GPIO17)
 #define DEFAULT_UART_BUS_TX (&pin_GPIO18)

ports/espressif/boards/atmegazero_esp32s2/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "ATMegaZero ESP32-S2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)
 

ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h

@@ -28,8 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "CrumpS2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "BastWiFi"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h

@@ -39,9 +39,3 @@
 // Serial over UART
 #define CIRCUITPY_DEBUG_UART_RX               DEFAULT_UART_BUS_RX
 #define CIRCUITPY_DEBUG_UART_TX               DEFAULT_UART_BUS_TX
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO2)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/board.c

@@ -0,0 +1,48 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+void board_init(void) {
+    // Debug UART
+    #ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO43);
+    common_hal_never_reset_pin(&pin_GPIO44);
+    #endif /* DEBUG */
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h

@@ -0,0 +1,35 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "ESP32-S2-DevKitC-1-N4"
+#define MICROPY_HW_MCU_NAME         "ESP32S2"
+
+#define MICROPY_HW_NEOPIXEL         (&pin_GPIO18)
+
+#define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
+#define DEFAULT_UART_BUS_TX         (&pin_GPIO43)

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.mk

@@ -0,0 +1,17 @@
+USB_VID = 0x303A
+USB_PID = 0x7009
+USB_PRODUCT = "ESP32-S2-DevKitC-1-N4"
+USB_MANUFACTURER = "Espressif"
+
+IDF_TARGET = esp32s2
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE=dio
+CIRCUITPY_ESP_FLASH_FREQ=40m
+CIRCUITPY_ESP_FLASH_SIZE=4MB

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/pins.c

@@ -0,0 +1,53 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_IO26), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_IO33), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_IO34), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) },
+
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/sdkconfig

@@ -0,0 +1,5 @@
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s2"
+# end of LWIP

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.mk

@@ -1,5 +1,5 @@
-USB_VID = 0x239A
+USB_VID = 0x303A
-USB_PID = 0x80A6
+USB_PID = 0x7009
 USB_PRODUCT = "ESP32-S2-DevKitC-1-N4R2"
 USB_MANUFACTURER = "Espressif"
 

ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "ESP32-S3-Box-2.5"
 #define MICROPY_HW_MCU_NAME         "ESP32S3"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s3_devkitc_1_n8r2/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s3_devkitc_1_n8r2/sdkconfig

@@ -1,3 +1,9 @@
+#
+# Component config
+#
+#
+# ESP32S3-Specific
+#
 CONFIG_ESP32S3_SPIRAM_SUPPORT=y
 #
 # SPI RAM config
@@ -9,12 +15,10 @@ CONFIG_SPIRAM_TYPE_ESPPSRAM16=y
 # CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
 CONFIG_SPIRAM_SIZE=2097152
-# end of SPI RAM config
-
-CONFIG_DEFAULT_PSRAM_CLK_IO=30
 #
 # PSRAM Clock and CS IO for ESP32S3
 #
+CONFIG_DEFAULT_PSRAM_CLK_IO=30
 CONFIG_DEFAULT_PSRAM_CS_IO=26
 # end of PSRAM Clock and CS IO for ESP32S3
 
@@ -30,8 +34,14 @@ CONFIG_SPIRAM_USE_MEMMAP=y
 # CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
 # CONFIG_SPIRAM_USE_MALLOC is not set
 CONFIG_SPIRAM_MEMTEST=y
+# end of SPI RAM config
+
+# end of ESP32S3-Specific
+
 #
 # LWIP
 #
 CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
 # end of LWIP
+
+# end of Component config

ports/espressif/boards/espressif_esp32s3_devkitc_1_n8r8/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s3_devkitm_1_n8/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_hmi_devkit_1/mpconfigboard.h

@@ -31,12 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO21)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO39)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO40)
 

ports/espressif/boards/espressif_kaluga_1.3/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_kaluga_1/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_saola_1_wroom/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_saola_1_wrover/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/franzininho_wifi_wroom/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/franzininho_wifi_wrover/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/gravitech_cucumber_m/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_UART_BUS_TX (&pin_GPIO43)
 #define DEFAULT_UART_BUS_RX (&pin_GPIO44)

ports/espressif/boards/gravitech_cucumber_ms/mpconfigboard.h

@@ -31,12 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO40)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO41)
 

ports/espressif/boards/gravitech_cucumber_r/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_UART_BUS_TX (&pin_GPIO43)
 #define DEFAULT_UART_BUS_RX (&pin_GPIO44)

ports/espressif/boards/gravitech_cucumber_rs/mpconfigboard.h

@@ -31,12 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO40)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO41)
 

ports/espressif/boards/hexky_s2/mpconfigboard.h

@@ -32,11 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)
 

ports/espressif/boards/hiibot_iots2/mpconfigboard.h

@@ -34,7 +34,3 @@
 
 #define MICROPY_HW_BUTTON (&pin_GPIO21)
 #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO21)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/lilygo_ttgo_t8_esp32_s2_wroom/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "TTGO T8 ESP32-S2-WROOM"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/lilygo_ttgo_t8_s2/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "LILYGO TTGO T8 ESP32-S2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "LILYGO TTGO T8 ESP32-S2 w/Display"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/lolin_s2_mini/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "S2Mini"
 #define MICROPY_HW_MCU_NAME         "ESP32S2-S2FN4R2" // from Wemos MP
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO35) // no I2C labels on S2 Mini, def from Wemos MP
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) // no I2C labels on S2 Mini, def from Wemos MP
 

ports/espressif/boards/lolin_s2_pico/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "S2Pico"
 #define MICROPY_HW_MCU_NAME         "ESP32S2-S2FN4R2" // from Wemos MP
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) // JST SH Connector Pin 3 NOT STEMMA QT / Feather pinout
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) // JST SH Connector Pin 2 NOT STEMMA QT / Feather pinout
 

ports/espressif/boards/microdev_micro_c3/mpconfigboard.h

@@ -46,9 +46,3 @@
 // Serial over UART
 #define CIRCUITPY_DEBUG_UART_RX     DEFAULT_UART_BUS_RX
 #define CIRCUITPY_DEBUG_UART_TX     DEFAULT_UART_BUS_TX
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO9)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/microdev_micro_s2/mpconfigboard.h

@@ -41,9 +41,3 @@
 
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/morpheans_morphesp-240/mpconfigboard.h

@@ -30,11 +30,6 @@
 #define MICROPY_HW_MCU_NAME     "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO16)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO7)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO6)

ports/espressif/boards/muselab_nanoesp32_s2_wroom/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/muselab_nanoesp32_s2_wrover/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/odt_pixelwing_esp32_s2/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

ports/espressif/boards/targett_module_clip_wroom/mpconfigboard.h

@@ -32,9 +32,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 // #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/targett_module_clip_wrover/mpconfigboard.h

@@ -32,9 +32,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 // #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/unexpectedmaker_feathers2/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "FeatherS2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 // #define MICROPY_HW_APA102_MOSI   (&pin_GPIO40)
 // #define MICROPY_HW_APA102_SCK    (&pin_GPIO45)
 

ports/espressif/boards/unexpectedmaker_feathers2_neo/mpconfigboard.h

@@ -31,10 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

ports/espressif/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "FeatherS2 PreRelease"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 // #define MICROPY_HW_APA102_MOSI   (&pin_GPIO40)
 // #define MICROPY_HW_APA102_SCK    (&pin_GPIO45)
 

ports/espressif/boards/unexpectedmaker_feathers3/mpconfigboard.h

@@ -31,10 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

ports/espressif/boards/unexpectedmaker_pros3/mpconfigboard.h

@@ -31,10 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO17)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)