diff --git a/ports/nrf/boards/arduino_nano_33_ble/README.md b/ports/nrf/boards/arduino_nano_33_ble/README.md new file mode 100644 index 0000000000..42d7a86184 --- /dev/null +++ b/ports/nrf/boards/arduino_nano_33_ble/README.md @@ -0,0 +1,27 @@ +# Arduino Nano 33 BLE and Nano 33 BLE Sense + +The [Arduino Nano 33 BLE](https://store.arduino.cc/usa/nano-33-ble-with-headers) and +[Arduino Nano 33 BLE Sense](https://store.arduino.cc/usa/nano-33-ble-sense) and +are built around the NINA B306 module, based on Nordic nRF 52840 and containing +a powerful Cortex M4F. Both include an onboard 9 axis Inertial Measurement Unit (IMU), the LSM9DS1. +The Nano 33 BLE Sense adds an LPS22HB barometric pressure and temperature sensor, +an ADPS-9960 digital proximity, ambient light, RGB, and gensture sensor, +and an MP34DT05 digital microphone. + +Note: the Arduino Nano 33 BLE and BLE Sense do not include a QSPI external +flash. Any Python code will need to be stored on the internal flash +filesystem. + +I2C pins `board.SCL1` and `board.SDA1` are not exposed and are used for onboard peripherals. +Pin `board.R_PULLUP` must be set to high to enable the `SCL1` and `SDA1` pullups for proper operation. + +Pin `board.VDD_ENV` applies power to the LSM9DS1, and must be high for it to be operational. + +Pins `board.MIC_PWR`, `board.PDMDIN`, and `board.PDMCLK` are for the Nano 33 BLE Sense onboard microphone. + +Pin `board.INT_ADPS` is the interrupt pin from the ADPS-9960. + +Pins `board.RGB_LED_R`, `board.RGB_LED_G`, and `board.RGB_LED_B` +are the red, green and blue LEDS in the onboard RGB LED. + +Pins `board.LED_G` and `board.LED_Y` are onboard green and red LEDs. `board.LED_Y` is also `board.SCK`. diff --git a/ports/nrf/boards/arduino_nano_33_ble/board.c b/ports/nrf/boards/arduino_nano_33_ble/board.c new file mode 100644 index 0000000000..ddfcde2848 --- /dev/null +++ b/ports/nrf/boards/arduino_nano_33_ble/board.c @@ -0,0 +1,63 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "nrf.h" +#include "nrf_rtc.h" + +void board_init(void) { + // Initializations below from Arduino variant.cpp. + + // // turn power LED on + // pinMode(LED_PWR, OUTPUT); + // digitalWrite(LED_PWR, HIGH); + + // Errata Nano33BLE - I2C pullup is on SWO line, need to disable TRACE + // was being enabled by nrfx_clock_anomaly_132 + CoreDebug->DEMCR = 0; + NRF_CLOCK->TRACECONFIG = 0; + + // FIXME: bootloader enables interrupt on COMPARE[0], which we don't handle + // Disable it here to avoid getting stuck when OVERFLOW irq is triggered + nrf_rtc_event_disable(NRF_RTC1, NRF_RTC_INT_COMPARE0_MASK); + nrf_rtc_int_disable(NRF_RTC1, NRF_RTC_INT_COMPARE0_MASK); + + // // FIXME: always enable I2C pullup and power @startup + // // Change for maximum powersave + // pinMode(PIN_ENABLE_SENSORS_3V3, OUTPUT); + // pinMode(PIN_ENABLE_I2C_PULLUP, OUTPUT); + + // digitalWrite(PIN_ENABLE_SENSORS_3V3, HIGH); + // digitalWrite(PIN_ENABLE_I2C_PULLUP, HIGH); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/nrf/boards/arduino_nano_33_ble/mpconfigboard.h b/ports/nrf/boards/arduino_nano_33_ble/mpconfigboard.h new file mode 100644 index 0000000000..d34a862439 --- /dev/null +++ b/ports/nrf/boards/arduino_nano_33_ble/mpconfigboard.h @@ -0,0 +1,16 @@ +#include "nrfx/hal/nrf_gpio.h" + +#define MICROPY_HW_BOARD_NAME "Arduino Nano 33 BLE" +#define MICROPY_HW_MCU_NAME "nRF52840" + +#define CIRCUITPY_AUTORELOAD_DELAY_MS 500 + +#define DEFAULT_I2C_BUS_SCL (&pin_P0_02) +#define DEFAULT_I2C_BUS_SDA (&pin_P0_31) + +#define DEFAULT_SPI_BUS_SCK (&pin_P0_13) +#define DEFAULT_SPI_BUS_MOSI (&pin_P0_01) +#define DEFAULT_SPI_BUS_MISO (&pin_P1_08) + +#define DEFAULT_UART_BUS_RX (&pin_P1_10) +#define DEFAULT_UART_BUS_TX (&pin_P1_03) diff --git a/ports/nrf/boards/arduino_nano_33_ble/mpconfigboard.mk b/ports/nrf/boards/arduino_nano_33_ble/mpconfigboard.mk new file mode 100644 index 0000000000..7a8e883f47 --- /dev/null +++ b/ports/nrf/boards/arduino_nano_33_ble/mpconfigboard.mk @@ -0,0 +1,24 @@ +USB_VID = 0x2341 +USB_PID = 0x805A +USB_PRODUCT = "Arduino_Nano_33_BLE" +USB_MANUFACTURER = "Arduino" + +MCU_SERIES = m4 +MCU_VARIANT = nrf52 +MCU_SUB_VARIANT = nrf52840 +MCU_CHIP = nrf52840 +SD ?= s140 +SOFTDEV_VERSION ?= 6.1.0 + +BOOT_SETTING_ADDR = 0xFF000 + +ifeq ($(SD),) + LD_FILE = boards/nrf52840_1M_256k.ld +else + LD_FILE = boards/adafruit_$(MCU_SUB_VARIANT)_$(SD_LOWER)_v$(firstword $(subst ., ,$(SOFTDEV_VERSION))).ld + CIRCUITPY_BLEIO = 1 +endif + +NRF_DEFINES += -DNRF52840_XXAA -DNRF52840 + +INTERNAL_FLASH_FILESYSTEM = 1 diff --git a/ports/nrf/boards/arduino_nano_33_ble/pins.c b/ports/nrf/boards/arduino_nano_33_ble/pins.c new file mode 100644 index 0000000000..9cdd369331 --- /dev/null +++ b/ports/nrf/boards/arduino_nano_33_ble/pins.c @@ -0,0 +1,63 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_P1_11) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_P1_12) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_P1_15) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_P1_13) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_P1_14) }, + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_P0_23) }, + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_P0_21) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_P0_27) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_P1_02) }, + + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_P0_04) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_P0_05) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_P0_30) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_P0_29) }, + + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_P0_31) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_31) }, + + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_P0_02) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_02) }, + + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_P0_28) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_P0_03) }, + + { MP_ROM_QSTR(MP_QSTR_SDA1), MP_ROM_PTR(&pin_P0_14) }, + { MP_ROM_QSTR(MP_QSTR_SCL1), MP_ROM_PTR(&pin_P0_15) }, + + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_P1_01) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_P1_08) }, + + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_P0_13) }, + { MP_ROM_QSTR(MP_QSTR_LED_Y), MP_ROM_PTR(&pin_P0_13) }, + + { MP_ROM_QSTR(MP_QSTR_LED_G), MP_ROM_PTR(&pin_P1_09) }, + + { MP_ROM_QSTR(MP_QSTR_RGB_LED_R), MP_ROM_PTR(&pin_P0_24) }, + { MP_ROM_QSTR(MP_QSTR_RGB_LED_G), MP_ROM_PTR(&pin_P0_16) }, + { MP_ROM_QSTR(MP_QSTR_RGB_LED_B), MP_ROM_PTR(&pin_P0_06) }, + + // Power line to LSM9DS1. + { MP_ROM_QSTR(MP_QSTR_VDD_ENV), MP_ROM_PTR(&pin_P0_22) }, + + // Pullup voltage for SDA1 and SCL1 + { MP_ROM_QSTR(MP_QSTR_R_PULLUP), MP_ROM_PTR(&pin_P1_00) }, + + { MP_ROM_QSTR(MP_QSTR_MIC_PWR), MP_ROM_PTR(&pin_P0_17) }, + { MP_ROM_QSTR(MP_QSTR_PDMCLK), MP_ROM_PTR(&pin_P0_26) }, + { MP_ROM_QSTR(MP_QSTR_PDMDIN), MP_ROM_PTR(&pin_P0_25) }, + + { MP_ROM_QSTR(MP_QSTR_INT_APDS), MP_ROM_PTR(&pin_P0_19) }, + + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_P1_03) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_P1_10) }, + + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, +}; + +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); diff --git a/ports/nrf/boards/circuitplayground_bluefruit/mpconfigboard.h b/ports/nrf/boards/circuitplayground_bluefruit/mpconfigboard.h index 1e55cd0260..66e06417a2 100644 --- a/ports/nrf/boards/circuitplayground_bluefruit/mpconfigboard.h +++ b/ports/nrf/boards/circuitplayground_bluefruit/mpconfigboard.h @@ -29,7 +29,6 @@ #define MICROPY_HW_BOARD_NAME "Adafruit Circuit Playground Bluefruit" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "CircuitPlaygroundBluefruit" #define FLASH_SIZE (0x100000) #define FLASH_PAGE_SIZE (4096) diff --git a/ports/nrf/boards/electronut_labs_blip/mpconfigboard.h b/ports/nrf/boards/electronut_labs_blip/mpconfigboard.h index 21e8c3ef61..6fe969d4ac 100644 --- a/ports/nrf/boards/electronut_labs_blip/mpconfigboard.h +++ b/ports/nrf/boards/electronut_labs_blip/mpconfigboard.h @@ -32,7 +32,6 @@ #define MICROPY_HW_BOARD_NAME "Electronut Labs Blip" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "ElectronutLabsPapyr" #define CIRCUITPY_AUTORELOAD_DELAY_MS 500 diff --git a/ports/nrf/boards/electronut_labs_papyr/mpconfigboard.h b/ports/nrf/boards/electronut_labs_papyr/mpconfigboard.h index 7f5021fdca..6fc1c5fad7 100644 --- a/ports/nrf/boards/electronut_labs_papyr/mpconfigboard.h +++ b/ports/nrf/boards/electronut_labs_papyr/mpconfigboard.h @@ -31,7 +31,6 @@ #define MICROPY_HW_BOARD_NAME "Electronut Labs Papyr" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "ElectronutLabsPapyr" #define CIRCUITPY_AUTORELOAD_DELAY_MS 500 diff --git a/ports/nrf/boards/feather_nrf52840_express/mpconfigboard.h b/ports/nrf/boards/feather_nrf52840_express/mpconfigboard.h index 70ccffc3f3..b5319032c9 100644 --- a/ports/nrf/boards/feather_nrf52840_express/mpconfigboard.h +++ b/ports/nrf/boards/feather_nrf52840_express/mpconfigboard.h @@ -29,7 +29,6 @@ #define MICROPY_HW_BOARD_NAME "Adafruit Feather nRF52840 Express" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "Feather52840Express" #define FLASH_SIZE (0x100000) #define FLASH_PAGE_SIZE (4096) diff --git a/ports/nrf/boards/makerdiary_nrf52840_mdk/mpconfigboard.h b/ports/nrf/boards/makerdiary_nrf52840_mdk/mpconfigboard.h index ed48364942..ce0abe724e 100644 --- a/ports/nrf/boards/makerdiary_nrf52840_mdk/mpconfigboard.h +++ b/ports/nrf/boards/makerdiary_nrf52840_mdk/mpconfigboard.h @@ -31,7 +31,6 @@ #define MICROPY_HW_BOARD_NAME "MakerDiary nRF52840 MDK" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "MakerDiary52840MDK" #define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(1, 5) #define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(1, 4) diff --git a/ports/nrf/boards/makerdiary_nrf52840_mdk_usb_dongle/mpconfigboard.h b/ports/nrf/boards/makerdiary_nrf52840_mdk_usb_dongle/mpconfigboard.h index d4096503d7..86c7243e57 100644 --- a/ports/nrf/boards/makerdiary_nrf52840_mdk_usb_dongle/mpconfigboard.h +++ b/ports/nrf/boards/makerdiary_nrf52840_mdk_usb_dongle/mpconfigboard.h @@ -31,7 +31,6 @@ #define MICROPY_HW_BOARD_NAME "MakerDiary nRF52840 MDK USB Dongle" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "MakerDiary52840MDKDongle" #define CIRCUITPY_AUTORELOAD_DELAY_MS 500 diff --git a/ports/nrf/boards/metro_nrf52840_express/mpconfigboard.h b/ports/nrf/boards/metro_nrf52840_express/mpconfigboard.h index 520eef90d9..797cc9668c 100644 --- a/ports/nrf/boards/metro_nrf52840_express/mpconfigboard.h +++ b/ports/nrf/boards/metro_nrf52840_express/mpconfigboard.h @@ -29,7 +29,6 @@ #define MICROPY_HW_BOARD_NAME "Adafruit Metro nRF52840 Express" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "Metro52840Express" #define FLASH_SIZE (0x100000) #define FLASH_PAGE_SIZE (4096) diff --git a/ports/nrf/boards/particle_argon/mpconfigboard.h b/ports/nrf/boards/particle_argon/mpconfigboard.h index a4ecb2bb43..1eeb7291bc 100644 --- a/ports/nrf/boards/particle_argon/mpconfigboard.h +++ b/ports/nrf/boards/particle_argon/mpconfigboard.h @@ -29,7 +29,6 @@ #define MICROPY_HW_BOARD_NAME "Particle Argon" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "Particle Argon" #define MICROPY_HW_LED_STATUS (&pin_P1_12) diff --git a/ports/nrf/boards/particle_boron/mpconfigboard.h b/ports/nrf/boards/particle_boron/mpconfigboard.h index 5e817311f9..af69924841 100644 --- a/ports/nrf/boards/particle_boron/mpconfigboard.h +++ b/ports/nrf/boards/particle_boron/mpconfigboard.h @@ -29,7 +29,6 @@ #define MICROPY_HW_BOARD_NAME "Particle Boron" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "Particle Boron" #define MICROPY_HW_LED_STATUS (&pin_P1_12) diff --git a/ports/nrf/boards/particle_xenon/mpconfigboard.h b/ports/nrf/boards/particle_xenon/mpconfigboard.h index 6c8cc7cef2..34ca6421e6 100644 --- a/ports/nrf/boards/particle_xenon/mpconfigboard.h +++ b/ports/nrf/boards/particle_xenon/mpconfigboard.h @@ -29,7 +29,6 @@ #define MICROPY_HW_BOARD_NAME "Particle Xenon" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "Particle Xenon" #define MICROPY_HW_LED_STATUS (&pin_P1_12) diff --git a/ports/nrf/boards/pca10056/mpconfigboard.h b/ports/nrf/boards/pca10056/mpconfigboard.h index 48ef7f1c39..5b30c7fe83 100644 --- a/ports/nrf/boards/pca10056/mpconfigboard.h +++ b/ports/nrf/boards/pca10056/mpconfigboard.h @@ -28,7 +28,6 @@ #define MICROPY_HW_BOARD_NAME "PCA10056 nRF52840-DK" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "nRF52840-DK" #define CIRCUITPY_AUTORELOAD_DELAY_MS 500 diff --git a/ports/nrf/boards/pca10059/mpconfigboard.h b/ports/nrf/boards/pca10059/mpconfigboard.h index d5ce212292..b79d3c88f2 100644 --- a/ports/nrf/boards/pca10059/mpconfigboard.h +++ b/ports/nrf/boards/pca10059/mpconfigboard.h @@ -26,7 +26,6 @@ #define MICROPY_HW_BOARD_NAME "PCA10059 nRF52840 Dongle" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "nRF52840-DK" #define MICROPY_HW_LED_STATUS (&pin_P0_06) diff --git a/ports/nrf/boards/sparkfun_nrf52840_mini/mpconfigboard.h b/ports/nrf/boards/sparkfun_nrf52840_mini/mpconfigboard.h index a5ed69b2bd..cc7e68864e 100644 --- a/ports/nrf/boards/sparkfun_nrf52840_mini/mpconfigboard.h +++ b/ports/nrf/boards/sparkfun_nrf52840_mini/mpconfigboard.h @@ -28,7 +28,6 @@ #define MICROPY_HW_BOARD_NAME "SparkFun Pro nRF52840 Mini" #define MICROPY_HW_MCU_NAME "nRF52840" -#define MICROPY_PY_SYS_PLATFORM "SFE_NRF52840_Mini" #define CIRCUITPY_AUTORELOAD_DELAY_MS 500 diff --git a/ports/nrf/mpconfigport.h b/ports/nrf/mpconfigport.h index 0b755a156b..bbe6419a5f 100644 --- a/ports/nrf/mpconfigport.h +++ b/ports/nrf/mpconfigport.h @@ -30,6 +30,10 @@ #include "ble_drv.h" +#ifdef NRF52840 +#define MICROPY_PY_SYS_PLATFORM "nRF52840" +#endif + #define MICROPY_PY_COLLECTIONS_ORDEREDDICT (1) #define MICROPY_PY_FUNCTION_ATTRS (1) #define MICROPY_PY_IO (1)