Conditionalize LTO

devices/ble_hci/common-hal/_bleio/att.c

@@ -44,6 +44,7 @@
 #include "shared-bindings/_bleio/Service.h"
 #include "shared-bindings/_bleio/UUID.h"
 #include "supervisor/shared/tick.h"
+#include "supervisor/shared/translate/translate.h"
 
 STATIC uint16_t max_mtu = BT_ATT_DEFAULT_LE_MTU;  // 23
 STATIC unsigned long timeout = 5000;

extmod/moduasyncio.c

@@ -33,6 +33,8 @@
 #include "shared-bindings/supervisor/__init__.h"
 #endif
 
+#include "supervisor/shared/translate/translate.h"
+
 #if MICROPY_PY_UASYNCIO
 
 // Used when task cannot be guaranteed to be non-NULL.

extmod/modubinascii.c

@@ -11,6 +11,8 @@
 #include "py/runtime.h"
 #include "py/binary.h"
 
+#include "supervisor/shared/translate/translate.h"
+
 static void check_not_unicode(const mp_obj_t arg) {
     #if MICROPY_CPYTHON_COMPAT
     if (mp_obj_is_str(arg)) {

extmod/moductypes.c

@@ -11,7 +11,7 @@
 #include "py/objtuple.h"
 #include "py/binary.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_PY_UCTYPES
 

extmod/moduhashlib.c

@@ -8,7 +8,7 @@
 
 #include "py/runtime.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_PY_UHASHLIB
 

extmod/moduheapq.c

@@ -6,7 +6,7 @@
 #include "py/objlist.h"
 #include "py/runtime.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_PY_UHEAPQ
 

extmod/modujson.c

@@ -13,7 +13,7 @@
 #include "py/runtime.h"
 #include "py/stream.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_PY_UJSON
 

extmod/modutimeq.c

@@ -10,7 +10,7 @@
 #include "py/runtime.h"
 #include "py/smallint.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_PY_UTIMEQ
 

extmod/moduzlib.c

@@ -10,7 +10,7 @@
 #include "py/stream.h"
 #include "py/mperrno.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_PY_UZLIB
 

extmod/vfs_fat.c

@@ -20,7 +20,7 @@
 #include "extmod/vfs_fat.h"
 #include "shared/timeutils/timeutils.h"
 #include "supervisor/filesystem.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if FF_MAX_SS == FF_MIN_SS
 #define SECSIZE(fs) (FF_MIN_SS)

extmod/vfs_posix_file.c

@@ -8,7 +8,7 @@
 #include "py/runtime.h"
 #include "py/stream.h"
 #include "extmod/vfs_posix.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if (defined(MICROPY_VFS_POSIX) && MICROPY_VFS_POSIX) || (defined(MICROPY_VFS_POSIX_FILE) && MICROPY_VFS_POSIX_FILE)
 

main.c

@@ -58,7 +58,7 @@
 #include "supervisor/shared/status_leds.h"
 #include "supervisor/shared/tick.h"
 #include "supervisor/shared/traceback.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "supervisor/shared/workflow.h"
 #include "supervisor/usb.h"
 #include "supervisor/workflow.h"

ports/atmel-samd/Makefile

@@ -123,8 +123,6 @@ $(echo PERIPHERALS_CHIP_FAMILY=$(PERIPHERALS_CHIP_FAMILY))
 #Debugging/Optimization
 ifeq ($(DEBUG), 1)
   CFLAGS += -ggdb3 -Og -Os
-  # You may want to disable -flto if it interferes with debugging.
-  CFLAGS += -flto -flto-partition=one
   # You may want to enable these flags to make setting breakpoints easier.
   # CFLAGS += -fno-inline -fno-ipa-sra
   ifeq ($(CHIP_FAMILY), samd21)
@@ -147,11 +145,8 @@ else
     CFLAGS += -finline-limit=$(CFLAGS_INLINE_LIMIT)
   endif
 
-  CFLAGS += -flto
-
   ifeq ($(CIRCUITPY_FULL_BUILD),0)
     CFLAGS += --param inline-unit-growth=15 --param max-inline-insns-auto=20
-    CFLAGS += -flto-partition=one
   endif
 
   ifdef CFLAGS_BOARD
@@ -168,8 +163,7 @@ CFLAGS += \
 	-mcpu=cortex-m0plus \
 	-msoft-float \
 	-mfloat-abi=soft \
-	-DSAMD21 \
+	-DSAMD21
-	-flto-partition=one
 endif
 ifeq ($(CHIP_FAMILY), samd51)
 CFLAGS += \
@@ -206,7 +200,6 @@ endif
 CFLAGS += -Wno-stringop-overread -Wno-stringop-overflow
 
 LDFLAGS = $(CFLAGS) -nostartfiles -Wl,-nostdlib -Wl,-T,$(GENERATED_LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs
-LDFLAGS += -flto=$(shell $(NPROC))
 LIBS := -lgcc -lc
 
 # Use toolchain libm if we're not using our own.

ports/atmel-samd/common-hal/_pew/PewPew.c

@@ -35,7 +35,7 @@
 #include "shared-bindings/digitalio/DigitalInOut.h"
 #include "shared-bindings/util.h"
 #include "samd/timers.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "timer_handler.h"
 
 

ports/atmel-samd/common-hal/analogio/AnalogIn.c

@@ -37,7 +37,7 @@
 #include "samd/adc.h"
 #include "shared-bindings/analogio/AnalogIn.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "atmel_start_pins.h"
 #include "hal/include/hal_adc_sync.h"

ports/atmel-samd/common-hal/analogio/AnalogOut.c

@@ -33,7 +33,7 @@
 #include "shared-bindings/analogio/AnalogOut.h"
 #include "shared-bindings/audioio/AudioOut.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "atmel_start_pins.h"
 #include "hal/include/hal_dac_sync.h"

ports/atmel-samd/common-hal/audiobusio/I2SOut.c

@@ -40,7 +40,7 @@
 #include "shared-bindings/audiobusio/I2SOut.h"
 #include "shared-bindings/audiocore/RawSample.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "atmel_start_pins.h"
 #include "hal/include/hal_gpio.h"

ports/atmel-samd/common-hal/audiobusio/PDMIn.c

@@ -37,7 +37,7 @@
 #include "shared-bindings/audiobusio/PDMIn.h"
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "atmel_start_pins.h"
 #include "hal/include/hal_gpio.h"
@@ -58,11 +58,11 @@
 #define MIN_MIC_CLOCK 1000000
 
 #ifdef SAMD21
-#define SERCTRL(name) I2S_SERCTRL_ ## name
+#define SERCTRL(name) I2S_SERCTRL_##name
 #endif
 
 #ifdef SAM_D5X_E5X
-#define SERCTRL(name) I2S_RXCTRL_ ## name
+#define SERCTRL(name) I2S_RXCTRL_##name
 #endif
 
 // Set by interrupt handler when DMA block has finished transferring.
@@ -80,102 +80,104 @@ void pdmin_reset(void) {
     pdmin_dma_block_done = false;
     pdmin_event_channel = EVSYS_SYNCH_NUM;
 
-    while (I2S->SYNCBUSY.reg & I2S_SYNCBUSY_ENABLE) {}
+    while (I2S->SYNCBUSY.reg & I2S_SYNCBUSY_ENABLE) {
+    }
     I2S->INTENCLR.reg = I2S_INTENCLR_MASK;
     I2S->INTFLAG.reg = I2S_INTFLAG_MASK;
     I2S->CTRLA.reg &= ~I2S_SYNCBUSY_ENABLE;
-    while (I2S->SYNCBUSY.reg & I2S_SYNCBUSY_ENABLE) {}
+    while (I2S->SYNCBUSY.reg & I2S_SYNCBUSY_ENABLE) {
+    }
     I2S->CTRLA.reg = I2S_CTRLA_SWRST;
 }
 
 // Caller validates that pins are free.
-void common_hal_audiobusio_pdmin_construct(audiobusio_pdmin_obj_t* self,
+void common_hal_audiobusio_pdmin_construct(audiobusio_pdmin_obj_t *self,
-                                           const mcu_pin_obj_t* clock_pin,
+    const mcu_pin_obj_t *clock_pin,
-                                           const mcu_pin_obj_t* data_pin,
+    const mcu_pin_obj_t *data_pin,
-                                           uint32_t sample_rate,
+    uint32_t sample_rate,
-                                           uint8_t bit_depth,
+    uint8_t bit_depth,
-                                           bool mono,
+    bool mono,
-                                           uint8_t oversample) {
+    uint8_t oversample) {
     self->clock_pin = clock_pin; // PA10, PA20 -> SCK0, PB11 -> SCK1
     #ifdef SAMD21
-        if (clock_pin == &pin_PA10
+    if (clock_pin == &pin_PA10
         #if defined(PIN_PA20) && !defined(IGNORE_PIN_PA20)
-            || clock_pin == &pin_PA20
+        || clock_pin == &pin_PA20
-        #endif
-            ) {
-            self->clock_unit = 0;
-        #if defined(PIN_PB11) && !defined(IGNORE_PIN_PB11)
-        } else if (clock_pin == &pin_PB11) {
-            self->clock_unit = 1;
         #endif
+        ) {
+        self->clock_unit = 0;
+    #if defined(PIN_PB11) && !defined(IGNORE_PIN_PB11)
+    } else if (clock_pin == &pin_PB11) {
+        self->clock_unit = 1;
+    #endif
     #endif
     #ifdef SAM_D5X_E5X
-        if (clock_pin == &pin_PA10 || clock_pin == &pin_PB16) {
+    if (clock_pin == &pin_PA10 || clock_pin == &pin_PB16) {
-            self->clock_unit = 0;
+        self->clock_unit = 0;
     } else if (clock_pin == &pin_PB12
-        #if defined(PIN_PB28) && !defined(IGNORE_PIN_PB28)
+               #if defined(PIN_PB28) && !defined(IGNORE_PIN_PB28)
-        || data_pin == &pin_PB28) {
+               || data_pin == &pin_PB28) {
-        #else
+               #else
-        ) {
+               ) {
         #endif
-            self->clock_unit = 1;
+        self->clock_unit = 1;
     #endif
-    } else {
+} else {
-        raise_ValueError_invalid_pin_name(MP_QSTR_clock);
+    raise_ValueError_invalid_pin_name(MP_QSTR_clock);
-    }
+}
 
-    self->data_pin = data_pin; // PA07, PA19 -> SD0, PA08, PB16 -> SD1
+self->data_pin = data_pin;     // PA07, PA19 -> SD0, PA08, PB16 -> SD1
 
     #ifdef SAMD21
-    if (false
+if (false
         #if defined(PIN_PA07) && !defined(IGNORE_PIN_PA07)
-        || data_pin == &pin_PA07
+    || data_pin == &pin_PA07
         #endif
         #if defined(PIN_PA19) && !defined(IGNORE_PIN_PA19)
-        || data_pin == &pin_PA19
+    || data_pin == &pin_PA19
         #endif
-        ) {
+    ) {
-        self->serializer = 0;
+    self->serializer = 0;
-    }
+} else if (false
-    else if (false
         #if defined(PIN_PA08) && !defined(IGNORE_PIN_PA08)
-        || data_pin == &pin_PA08
+           || data_pin == &pin_PA08
         #endif
-        #if defined (PIN_PB16) && !defined(IGNORE_PIN_PB16)
+        #if defined(PIN_PB16) && !defined(IGNORE_PIN_PB16)
-        || data_pin == &pin_PB16
+           || data_pin == &pin_PB16
        #endif
-        ) {
+           ) {
-        self->serializer = 1;
+    self->serializer = 1;
     #endif
     #ifdef SAM_D5X_E5X
-    if (data_pin == &pin_PB10 || data_pin == &pin_PA22) {
+if (data_pin == &pin_PB10 || data_pin == &pin_PA22) {
-        self->serializer = 1;
+    self->serializer = 1;
     #endif
-    } else {
+}else {
-        raise_ValueError_invalid_pin_name(MP_QSTR_data);
+    raise_ValueError_invalid_pin_name(MP_QSTR_data);
-    }
+}
 
-    if (!(bit_depth == 16 || bit_depth == 8) || !mono || oversample != OVERSAMPLING) {
+if (!(bit_depth == 16 || bit_depth == 8) || !mono || oversample != OVERSAMPLING) {
-        mp_raise_NotImplementedError(translate("Only 8 or 16 bit mono with " MP_STRINGIFY(OVERSAMPLING) "x oversampling is supported."));
+    mp_raise_NotImplementedError(translate("Only 8 or 16 bit mono with " MP_STRINGIFY(OVERSAMPLING) "x oversampling is supported."));
-    }
+}
 
-    turn_on_i2s();
+turn_on_i2s();
 
-    if (I2S->CTRLA.bit.ENABLE == 0) {
+if (I2S->CTRLA.bit.ENABLE == 0) {
-        I2S->CTRLA.bit.SWRST = 1;
+    I2S->CTRLA.bit.SWRST = 1;
-        while (I2S->CTRLA.bit.SWRST == 1) {}
+    while (I2S->CTRLA.bit.SWRST == 1) {
-    } else {
-        #ifdef SAMD21
-        if ((I2S->CTRLA.vec.SEREN & (1 << self->serializer)) != 0) {
-            mp_raise_RuntimeError(translate("Serializer in use"));
-        }
-        #endif
-        #ifdef SAM_D5X_E5X
-        if (I2S->CTRLA.bit.RXEN == 1) {
-            mp_raise_RuntimeError(translate("Serializer in use"));
-        }
-        #endif
     }
+} else {
+    #ifdef SAMD21
+    if ((I2S->CTRLA.vec.SEREN & (1 << self->serializer)) != 0) {
+        mp_raise_RuntimeError(translate("Serializer in use"));
+    }
+    #endif
+    #ifdef SAM_D5X_E5X
+    if (I2S->CTRLA.bit.RXEN == 1) {
+        mp_raise_RuntimeError(translate("Serializer in use"));
+    }
+    #endif
+}
     #ifdef SAM_D5X_E5X
     #define GPIO_I2S_FUNCTION GPIO_PIN_FUNCTION_J
     #endif
@@ -183,69 +185,69 @@ void common_hal_audiobusio_pdmin_construct(audiobusio_pdmin_obj_t* self,
     #define GPIO_I2S_FUNCTION GPIO_PIN_FUNCTION_G
     #endif
 
-    uint32_t clock_divisor = (uint32_t) roundf( 48000000.0f / sample_rate / oversample);
+uint32_t clock_divisor = (uint32_t)roundf(48000000.0f / sample_rate / oversample);
-    float mic_clock_freq = 48000000.0f / clock_divisor;
+float mic_clock_freq = 48000000.0f / clock_divisor;
-    self->sample_rate =  mic_clock_freq / oversample;
+self->sample_rate = mic_clock_freq / oversample;
-    if (mic_clock_freq <  MIN_MIC_CLOCK || clock_divisor == 0) {
+if (mic_clock_freq < MIN_MIC_CLOCK || clock_divisor == 0) {
-        mp_raise_ValueError(translate("sampling rate out of range"));
+    mp_raise_ValueError(translate("sampling rate out of range"));
-    }
+}
-    // Find a free GCLK to generate the MCLK signal.
+// Find a free GCLK to generate the MCLK signal.
-    uint8_t gclk = find_free_gclk(clock_divisor);
+uint8_t gclk = find_free_gclk(clock_divisor);
-    if (gclk > GCLK_GEN_NUM) {
+if (gclk > GCLK_GEN_NUM) {
-        mp_raise_RuntimeError(translate("Unable to find free GCLK"));
+    mp_raise_RuntimeError(translate("Unable to find free GCLK"));
-    }
+}
-    self->gclk = gclk;
+self->gclk = gclk;
 
-    enable_clock_generator(self->gclk, CLOCK_48MHZ, clock_divisor);
+enable_clock_generator(self->gclk, CLOCK_48MHZ, clock_divisor);
-    connect_gclk_to_peripheral(self->gclk, I2S_GCLK_ID_0 + self->clock_unit);
+connect_gclk_to_peripheral(self->gclk, I2S_GCLK_ID_0 + self->clock_unit);
 
-    // Clock unit configuration
+// Clock unit configuration
 
-    uint32_t clkctrl = I2S_CLKCTRL_MCKSEL_GCLK |
+uint32_t clkctrl = I2S_CLKCTRL_MCKSEL_GCLK |
-                       I2S_CLKCTRL_NBSLOTS(2) |
+    I2S_CLKCTRL_NBSLOTS(2) |
-                       I2S_CLKCTRL_FSWIDTH_SLOT |
+    I2S_CLKCTRL_FSWIDTH_SLOT |
-                       I2S_CLKCTRL_SLOTSIZE_16;
+    I2S_CLKCTRL_SLOTSIZE_16;
 
-    // Serializer configuration
+// Serializer configuration
     #ifdef SAMD21
-    uint32_t serctrl = (self->clock_unit << I2S_SERCTRL_CLKSEL_Pos) | SERCTRL(SERMODE_PDM2) | SERCTRL(DATASIZE_32);
+uint32_t serctrl = (self->clock_unit << I2S_SERCTRL_CLKSEL_Pos) | SERCTRL(SERMODE_PDM2) | SERCTRL(DATASIZE_32);
     #endif
     #ifdef SAM_D5X_E5X
-    uint32_t serctrl = (self->clock_unit << I2S_RXCTRL_CLKSEL_Pos) | SERCTRL(SERMODE_PDM2) | SERCTRL(DATASIZE_32);
+uint32_t serctrl = (self->clock_unit << I2S_RXCTRL_CLKSEL_Pos) | SERCTRL(SERMODE_PDM2) | SERCTRL(DATASIZE_32);
     #endif
 
-    // Configure the I2S peripheral
+// Configure the I2S peripheral
-    i2s_set_enable(false);
+i2s_set_enable(false);
 
-    I2S->CLKCTRL[self->clock_unit].reg = clkctrl;
+I2S->CLKCTRL[self->clock_unit].reg = clkctrl;
     #ifdef SAMD21
-    I2S->SERCTRL[self->serializer].reg = serctrl;
+I2S->SERCTRL[self->serializer].reg = serctrl;
     #endif
     #ifdef SAM_D5X_E5X
-    I2S->RXCTRL.reg = serctrl;
+I2S->RXCTRL.reg = serctrl;
     #endif
 
-    i2s_set_enable(true);
+i2s_set_enable(true);
 
-    // Run the clock all the time. This eliminates startup delay for the microphone,
+// Run the clock all the time. This eliminates startup delay for the microphone,
-    // which can be 10-100ms. Turn serializer on as needed.
+// which can be 10-100ms. Turn serializer on as needed.
-    i2s_set_clock_unit_enable(self->clock_unit, true);
+i2s_set_clock_unit_enable(self->clock_unit, true);
 
-    claim_pin(clock_pin);
+claim_pin(clock_pin);
-    claim_pin(data_pin);
+claim_pin(data_pin);
 
-    gpio_set_pin_function(self->clock_pin->number, GPIO_I2S_FUNCTION);
+gpio_set_pin_function(self->clock_pin->number, GPIO_I2S_FUNCTION);
-    gpio_set_pin_function(self->data_pin->number, GPIO_I2S_FUNCTION);
+gpio_set_pin_function(self->data_pin->number, GPIO_I2S_FUNCTION);
 
-    self->bytes_per_sample = oversample >> 3;
+self->bytes_per_sample = oversample >> 3;
-    self->bit_depth = bit_depth;
+self->bit_depth = bit_depth;
 }
 
-bool common_hal_audiobusio_pdmin_deinited(audiobusio_pdmin_obj_t* self) {
+bool common_hal_audiobusio_pdmin_deinited(audiobusio_pdmin_obj_t *self) {
     return self->clock_pin == NULL;
 }
 
-void common_hal_audiobusio_pdmin_deinit(audiobusio_pdmin_obj_t* self) {
+void common_hal_audiobusio_pdmin_deinit(audiobusio_pdmin_obj_t *self) {
     if (common_hal_audiobusio_pdmin_deinited(self)) {
         return;
     }
@@ -264,24 +266,24 @@ void common_hal_audiobusio_pdmin_deinit(audiobusio_pdmin_obj_t* self) {
     self->data_pin = NULL;
 }
 
-uint8_t common_hal_audiobusio_pdmin_get_bit_depth(audiobusio_pdmin_obj_t* self) {
+uint8_t common_hal_audiobusio_pdmin_get_bit_depth(audiobusio_pdmin_obj_t *self) {
     return self->bit_depth;
 }
 
-uint32_t common_hal_audiobusio_pdmin_get_sample_rate(audiobusio_pdmin_obj_t* self) {
+uint32_t common_hal_audiobusio_pdmin_get_sample_rate(audiobusio_pdmin_obj_t *self) {
     return self->sample_rate;
 }
 
-static void setup_dma(audiobusio_pdmin_obj_t* self, uint32_t length,
+static void setup_dma(audiobusio_pdmin_obj_t *self, uint32_t length,
-                      DmacDescriptor* descriptor,
+    DmacDescriptor *descriptor,
-                      DmacDescriptor* second_descriptor,
+    DmacDescriptor *second_descriptor,
-                      uint32_t words_per_buffer, uint8_t words_per_sample,
+    uint32_t words_per_buffer, uint8_t words_per_sample,
-                      uint32_t* first_buffer, uint32_t* second_buffer) {
+    uint32_t *first_buffer, uint32_t *second_buffer) {
     descriptor->BTCTRL.reg = DMAC_BTCTRL_VALID |
-                             DMAC_BTCTRL_BLOCKACT_NOACT |
+        DMAC_BTCTRL_BLOCKACT_NOACT |
-                             DMAC_BTCTRL_EVOSEL_BLOCK |
+        DMAC_BTCTRL_EVOSEL_BLOCK |
-                             DMAC_BTCTRL_DSTINC |
+        DMAC_BTCTRL_DSTINC |
-                             DMAC_BTCTRL_BEATSIZE_WORD;
+        DMAC_BTCTRL_BEATSIZE_WORD;
 
     // Block transfer count is the number of beats per block (aka descriptor).
     // In this case there are two bytes per beat so divide the length by two.
@@ -291,7 +293,7 @@ static void setup_dma(audiobusio_pdmin_obj_t* self, uint32_t length,
     }
 
     descriptor->BTCNT.reg = block_transfer_count;
-    descriptor->DSTADDR.reg = ((uint32_t) first_buffer + sizeof(uint32_t) * block_transfer_count);
+    descriptor->DSTADDR.reg = ((uint32_t)first_buffer + sizeof(uint32_t) * block_transfer_count);
     descriptor->DESCADDR.reg = 0;
     if (length * words_per_sample > words_per_buffer) {
         descriptor->DESCADDR.reg = ((uint32_t)second_descriptor);
@@ -314,7 +316,7 @@ static void setup_dma(audiobusio_pdmin_obj_t* self, uint32_t length,
             block_transfer_count = length * words_per_sample - words_per_buffer;
             second_descriptor->DESCADDR.reg = 0;
         }
-        second_descriptor->DSTADDR.reg = ((uint32_t) second_buffer + sizeof(uint32_t) * block_transfer_count);
+        second_descriptor->DSTADDR.reg = ((uint32_t)second_buffer + sizeof(uint32_t) * block_transfer_count);
 
         second_descriptor->BTCNT.reg = block_transfer_count;
         #ifdef SAMD21
@@ -324,10 +326,10 @@ static void setup_dma(audiobusio_pdmin_obj_t* self, uint32_t length,
         second_descriptor->SRCADDR.reg = (uint32_t)&I2S->RXDATA;
         #endif
         second_descriptor->BTCTRL.reg = DMAC_BTCTRL_VALID |
-                                        DMAC_BTCTRL_BLOCKACT_NOACT |
+            DMAC_BTCTRL_BLOCKACT_NOACT |
-                                        DMAC_BTCTRL_EVOSEL_BLOCK |
+            DMAC_BTCTRL_EVOSEL_BLOCK |
-                                        DMAC_BTCTRL_DSTINC |
+            DMAC_BTCTRL_DSTINC |
-                                        DMAC_BTCTRL_BEATSIZE_WORD;
+            DMAC_BTCTRL_BEATSIZE_WORD;
     }
 }
 
@@ -341,7 +343,7 @@ static void setup_dma(audiobusio_pdmin_obj_t* self, uint32_t length,
 // higher sample rate than specified.  Then after the audio is
 // recorded, a more expensive filter non-real-time filter could be
 // used to down-sample and low-pass.
-const uint16_t sinc_filter [OVERSAMPLING] = {
+const uint16_t sinc_filter[OVERSAMPLING] = {
     0, 2, 9, 21, 39, 63, 94, 132,
     179, 236, 302, 379, 467, 565, 674, 792,
     920, 1055, 1196, 1341, 1487, 1633, 1776, 1913,
@@ -353,26 +355,26 @@ const uint16_t sinc_filter [OVERSAMPLING] = {
 };
 
 #ifdef SAMD21
-#define REPEAT_16_TIMES(X) do { for(uint8_t j=0; j<4; j++) { X X X X } } while (0)
+#define REPEAT_16_TIMES(X) do { for (uint8_t j = 0; j < 4; j++) { X X X X } } while (0)
 #else
-#define REPEAT_16_TIMES(X) do { X X X X X X X X X X X X X X X X } while(0)
+#define REPEAT_16_TIMES(X) do { X X X X X X X X X X X X X X X X } while (0)
 #endif
 
 static uint16_t filter_sample(uint32_t pdm_samples[4]) {
     uint16_t running_sum = 0;
     const uint16_t *filter_ptr = sinc_filter;
-    for (uint8_t i = 0; i < OVERSAMPLING/16; i++) {
+    for (uint8_t i = 0; i < OVERSAMPLING / 16; i++) {
         // The sample is 16-bits right channel in the upper two bytes and 16-bits left channel
         // in the lower two bytes.
         // We just ignore the upper bits
         uint32_t pdm_sample = pdm_samples[i];
-        REPEAT_16_TIMES( {
+        REPEAT_16_TIMES({
-                if (pdm_sample & 0x8000) {
+            if (pdm_sample & 0x8000) {
-                    running_sum += *filter_ptr;
+                running_sum += *filter_ptr;
-                }
-                filter_ptr++;
-                pdm_sample <<= 1;
             }
+            filter_ptr++;
+            pdm_sample <<= 1;
+        }
             );
     }
     return running_sum;
@@ -380,8 +382,8 @@ static uint16_t filter_sample(uint32_t pdm_samples[4]) {
 
 // output_buffer may be a byte buffer or a halfword buffer.
 // output_buffer_length is the number of slots, not the number of bytes.
-uint32_t common_hal_audiobusio_pdmin_record_to_buffer(audiobusio_pdmin_obj_t* self,
+uint32_t common_hal_audiobusio_pdmin_record_to_buffer(audiobusio_pdmin_obj_t *self,
-        uint16_t* output_buffer, uint32_t output_buffer_length) {
+    uint16_t *output_buffer, uint32_t output_buffer_length) {
     uint8_t dma_channel = dma_allocate_channel();
     pdmin_event_channel = find_sync_event_channel_raise();
     pdmin_dma_block_done = false;
@@ -399,7 +401,7 @@ uint32_t common_hal_audiobusio_pdmin_record_to_buffer(audiobusio_pdmin_obj_t* se
     COMPILER_ALIGNED(16) DmacDescriptor second_descriptor;
 
     setup_dma(self, output_buffer_length, dma_descriptor(dma_channel), &second_descriptor,
-              words_per_buffer, words_per_sample, first_buffer, second_buffer);
+        words_per_buffer, words_per_sample, first_buffer, second_buffer);
 
     uint8_t trigger_source = I2S_DMAC_ID_RX_0;
     #ifdef SAMD21
@@ -444,7 +446,7 @@ uint32_t common_hal_audiobusio_pdmin_record_to_buffer(audiobusio_pdmin_obj_t* se
 
         // Flip back and forth between processing the first and second buffers.
         uint32_t *buffer = first_buffer;
-        DmacDescriptor* descriptor = dma_descriptor(dma_channel);
+        DmacDescriptor *descriptor = dma_descriptor(dma_channel);
         if (buffers_processed % 2 == 1) {
             buffer = second_buffer;
             descriptor = &second_descriptor;
@@ -459,7 +461,7 @@ uint32_t common_hal_audiobusio_pdmin_record_to_buffer(audiobusio_pdmin_obj_t* se
             uint16_t value = filter_sample(buffer + i * words_per_sample);
             if (self->bit_depth == 8) {
                 // Truncate to 8 bits.
-                ((uint8_t*) output_buffer)[values_output] = value >> 8;
+                ((uint8_t *)output_buffer)[values_output] = value >> 8;
             } else {
                 output_buffer[values_output] = value;
             }
@@ -471,7 +473,7 @@ uint32_t common_hal_audiobusio_pdmin_record_to_buffer(audiobusio_pdmin_obj_t* se
         // Compute how many more samples we need, and if the last buffer is the last
         // set of samples needed, adjust the DMA count to only fetch as necessary.
         remaining_samples_needed = output_buffer_length - values_output;
-        if (remaining_samples_needed <= samples_per_buffer*2 &&
+        if (remaining_samples_needed <= samples_per_buffer * 2 &&
             remaining_samples_needed > samples_per_buffer) {
             // Adjust the DMA settings for the current buffer, which will be processed
             // after the other buffer, which is now receiving samples via DMA.
@@ -484,7 +486,7 @@ uint32_t common_hal_audiobusio_pdmin_record_to_buffer(audiobusio_pdmin_obj_t* se
             // Set up to receive the last set of samples (don't include the alternate buffer, now in use).
             uint32_t samples_needed_for_last_buffer = remaining_samples_needed - samples_per_buffer;
             descriptor->BTCNT.reg = samples_needed_for_last_buffer * words_per_sample;
-            descriptor->DSTADDR.reg = ((uint32_t) buffer)
+            descriptor->DSTADDR.reg = ((uint32_t)buffer)
                 + samples_needed_for_last_buffer * words_per_sample * sizeof(buffer[0]);
 
             // Break chain to alternate buffer.

ports/atmel-samd/common-hal/audioio/AudioOut.c

@@ -35,7 +35,7 @@
 #include "shared-bindings/audioio/AudioOut.h"
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "atmel_start_pins.h"
 #include "hal/include/hal_gpio.h"

ports/atmel-samd/common-hal/busio/I2C.c

@@ -35,7 +35,7 @@
 #include "samd/sercom.h"
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "common-hal/busio/__init__.h"
 

ports/atmel-samd/common-hal/busio/SPI.c

@@ -33,6 +33,7 @@
 #include "peripheral_clk_config.h"
 
 #include "supervisor/board.h"
+#include "supervisor/shared/translate/translate.h"
 #include "common-hal/busio/__init__.h"
 
 #include "hal/include/hal_gpio.h"

ports/atmel-samd/common-hal/busio/UART.c

@@ -34,7 +34,7 @@
 #include "py/mperrno.h"
 #include "py/runtime.h"
 #include "py/stream.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "supervisor/shared/tick.h"
 
 #include "hpl_sercom_config.h"

ports/atmel-samd/common-hal/countio/Counter.c

@@ -7,7 +7,7 @@
 #include "eic_handler.h"
 #include "samd/external_interrupts.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void common_hal_countio_counter_construct(countio_counter_obj_t *self,
     const mcu_pin_obj_t *pin, countio_edge_t edge, digitalio_pull_t pull) {

ports/atmel-samd/common-hal/digitalio/DigitalInOut.c

@@ -34,7 +34,7 @@
 
 #include "common-hal/microcontroller/Pin.h"
 #include "shared-bindings/digitalio/DigitalInOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 digitalinout_result_t common_hal_digitalio_digitalinout_construct(
     digitalio_digitalinout_obj_t *self, const mcu_pin_obj_t *pin) {

ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c

@@ -48,7 +48,7 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/time/__init__.h"
 #include "supervisor/shared/tick.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #ifdef SAMD21
 #include "hpl/gclk/hpl_gclk_base.h"

ports/atmel-samd/common-hal/microcontroller/Pin.c

@@ -27,6 +27,7 @@
 #include "py/runtime.h"
 
 #include "shared-bindings/microcontroller/Pin.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "atmel_start_pins.h"
 #include "hal/include/hal_gpio.h"

ports/atmel-samd/common-hal/microcontroller/__init__.c

@@ -36,7 +36,7 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/microcontroller/Processor.h"
 #include "supervisor/shared/safe_mode.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void common_hal_mcu_delay_us(uint32_t delay) {
     mp_hal_delay_us(delay);

ports/atmel-samd/common-hal/ps2io/Ps2.c

@@ -43,7 +43,7 @@
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/ps2io/Ps2.h"
 #include "supervisor/port.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #define STATE_IDLE 0
 #define STATE_RECV 1

ports/atmel-samd/common-hal/pulseio/PulseIn.c

@@ -44,7 +44,7 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/pulseio/PulseIn.h"
 #include "supervisor/shared/tick.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "supervisor/port.h"
 
 // This timer is shared amongst all PulseIn objects as a higher resolution clock.

ports/atmel-samd/common-hal/pulseio/PulseOut.c

@@ -36,7 +36,7 @@
 #include "py/gc.h"
 #include "py/runtime.h"
 #include "shared-bindings/pulseio/PulseOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "timer_handler.h"
 
 // This timer is shared amongst all PulseOut objects under the assumption that

ports/atmel-samd/common-hal/pwmio/PWMOut.c

@@ -38,7 +38,7 @@
 #include "hal/utils/include/utils_repeat_macro.h"
 #include "samd/pins.h"
 #include "samd/timers.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #undef ENABLE
 

ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c

@@ -33,7 +33,7 @@
 #include "eic_handler.h"
 #include "samd/external_interrupts.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void common_hal_rotaryio_incrementalencoder_construct(rotaryio_incrementalencoder_obj_t *self,
     const mcu_pin_obj_t *pin_a, const mcu_pin_obj_t *pin_b) {

ports/atmel-samd/common-hal/rtc/RTC.c

@@ -37,7 +37,7 @@
 #include "shared-bindings/rtc/__init__.h"
 #include "shared-bindings/rtc/RTC.h"
 #include "supervisor/port.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 // This is the time in seconds since 2000 that the RTC was started.
 // TODO: Change the offset to ticks so that it can be a subsecond adjustment.

ports/atmel-samd/common-hal/sdioio/SDCard.c

@@ -32,7 +32,7 @@
 #include "shared-bindings/sdioio/SDCard.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/microcontroller/__init__.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "genhdr/sdiodata.h"
 

ports/atmel-samd/common-hal/touchio/TouchIn.c

@@ -33,7 +33,7 @@
 #include "py/mphal.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/touchio/TouchIn.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 // Native touchio only exists for SAMD21
 #ifdef SAMD21

ports/atmel-samd/mpconfigport.mk

@@ -78,6 +78,8 @@ endif
 SUPEROPT_GC = 0
 SUPEROPT_VM = 0
 
+CIRCUITPY_LTO = one
+
 ifeq ($(CIRCUITPY_FULL_BUILD),0)
 # On the smallest boards, this saves about 180 bytes. On other boards, it may -increase- space used.
 CFLAGS_BOARD = -fweb -frename-registers
@@ -94,6 +96,12 @@ ifeq ($(CHIP_FAMILY),samd51)
 # No native touchio on SAMD51.
 CIRCUITPY_TOUCHIO_USE_NATIVE = 0
 
+ifeq ($(CIRCUITPY_FULL_BUILD),1)
+CIRCUITPY_LTO ?= balanced
+else
+CIRCUITPY_LTO ?= one
+endif
+
 # The ?='s allow overriding in mpconfigboard.mk.
 
 

ports/broadcom/common-hal/digitalio/DigitalInOut.c

@@ -32,7 +32,7 @@
 
 #include "common-hal/microcontroller/Pin.h"
 #include "shared-bindings/digitalio/DigitalInOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "peripherals/broadcom/gpio.h"
 

ports/broadcom/common-hal/sdioio/SDCard.c

@@ -35,7 +35,7 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/microcontroller/__init__.h"
 #include "supervisor/port.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "peripherals/broadcom/cpu.h"
 #include "peripherals/broadcom/defines.h"

ports/espressif/Makefile

@@ -165,8 +165,6 @@ else
 		# RISC-V is larger than xtensa so do -Os for it
 	  OPTIMIZATION_FLAGS ?= -Os
 	endif
-  # TODO: Test with -flto
-  ### CFLAGS += -flto
 endif
 
 # option to override compiler optimization level, set in boards/$(BOARD)/mpconfigboard.mk

ports/espressif/common-hal/analogio/AnalogIn.c

@@ -28,7 +28,7 @@
 #include "shared-bindings/analogio/AnalogIn.h"
 #include "py/mperrno.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "components/driver/include/driver/adc_common.h"
 #include "components/esp_adc_cal/include/esp_adc_cal.h"

ports/espressif/common-hal/analogio/AnalogOut.c

@@ -33,7 +33,7 @@
 
 #include "shared-bindings/analogio/AnalogOut.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #ifdef CONFIG_IDF_TARGET_ESP32S2
 #include "components/driver/include/driver/dac_common.h"

ports/espressif/common-hal/audiobusio/I2SOut.c

@@ -42,7 +42,7 @@
 #include "shared-bindings/audiobusio/I2SOut.h"
 #include "shared-bindings/audiocore/RawSample.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "driver/i2s.h"
 

ports/espressif/common-hal/busio/I2C.c

@@ -32,7 +32,7 @@
 
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
     const mcu_pin_obj_t *scl, const mcu_pin_obj_t *sda, uint32_t frequency, uint32_t timeout) {

ports/espressif/common-hal/busio/UART.c

@@ -38,7 +38,7 @@
 #include "py/runtime.h"
 #include "py/stream.h"
 #include "supervisor/port.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "supervisor/shared/tick.h"
 
 uint8_t never_reset_uart_mask = 0;

ports/espressif/common-hal/countio/Counter.c

@@ -29,7 +29,7 @@
 #include "common-hal/microcontroller/Pin.h"
 
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void common_hal_countio_counter_construct(countio_counter_obj_t *self,
     const mcu_pin_obj_t *pin, countio_edge_t edge, digitalio_pull_t pull) {

ports/espressif/common-hal/digitalio/DigitalInOut.c

@@ -26,7 +26,7 @@
 
 #include "shared-bindings/digitalio/DigitalInOut.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "components/driver/include/driver/gpio.h"
 

ports/espressif/common-hal/microcontroller/Processor.c

@@ -33,7 +33,7 @@
 #include "common-hal/microcontroller/Processor.h"
 #include "shared-bindings/microcontroller/Processor.h"
 #include "shared-bindings/microcontroller/ResetReason.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "esp_sleep.h"
 #include "esp_system.h"

ports/litex/Makefile

@@ -81,8 +81,6 @@ ifeq ($(DEBUG), 1)
 else
   CFLAGS += -DNDEBUG -ggdb3
   OPTIMIZATION_FLAGS ?= -O2 -fno-inline-functions
-  # TODO: Test with -flto
-  ### CFLAGS += -flto
 endif
 
 # option to override compiler optimization level, set in boards/$(BOARD)/mpconfigboard.mk
@@ -99,7 +97,7 @@ LDFLAGS = $(CFLAGS) -Wl,-nostdlib -Wl,-T,$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -W
 LIBS := -lgcc -lc
 
 
-LDFLAGS += -flto -ffreestanding -nostartfiles -Wl,--gc-section -Wl,-Bstatic -Wl,-melf32lriscv -nostartfiles \
+LDFLAGS += -ffreestanding -nostartfiles -Wl,--gc-section -Wl,-Bstatic -Wl,-melf32lriscv -nostartfiles \
 			-Wl,--no-warn-mismatch \
 			-Wl,--build-id=none
 

ports/litex/common-hal/digitalio/DigitalInOut.c

@@ -27,7 +27,7 @@
 
 #include "shared-bindings/digitalio/DigitalInOut.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "csr.h"
 

ports/litex/common-hal/microcontroller/Processor.c

@@ -31,7 +31,7 @@
 #include "common-hal/microcontroller/Processor.h"
 #include "shared-bindings/microcontroller/Processor.h"
 #include "shared-bindings/microcontroller/ResetReason.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "csr.h"
 #include "generated/soc.h"

ports/mimxrt10xx/Makefile

@@ -75,7 +75,7 @@ INC += \
 
 # NDEBUG disables assert() statements. This reduces code size pretty dramatically, per tannewt.
 
-CFLAGS += -Os -ftree-vrp -DNDEBUG -ffreestanding
+CFLAGS += -ftree-vrp -DNDEBUG
 
 # TinyUSB defines
 CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX -DCFG_TUD_MIDI_RX_BUFSIZE=512 -DCFG_TUD_CDC_RX_BUFSIZE=512 -DCFG_TUD_MIDI_TX_BUFSIZE=512 -DCFG_TUD_CDC_TX_BUFSIZE=512 -DCFG_TUD_MSC_BUFSIZE=1024
@@ -84,12 +84,8 @@ CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX -DCFG_TUD_MIDI_RX_BUFSIZE=512 -DCFG_
 # Never set -fno-inline because we use inline to move small functions into routines that must be
 # in RAM. If inlining is disallowed, then we may end up calling a function in flash when we cannot.
 ifeq ($(DEBUG), 1)
-  # You may want to disable -flto if it interferes with debugging.
-  # CFLAGS += -flto -flto-partition=none
   # You may want to enable these flags to make setting breakpoints easier.
   CFLAGS += -fno-ipa-sra
-else
-  #CFLAGS += -flto -flto-partition=none
 endif
 
 CFLAGS += $(INC) -ggdb -Wall -Werror -std=gnu11 -nostdlib -fshort-enums $(BASE_CFLAGS) $(CFLAGS_MOD) $(COPT) -Werror=missing-prototypes
@@ -105,7 +101,6 @@ CFLAGS += \
 	-mfloat-abi=hard \
 	-mfpu=fpv5-sp-d16 \
 	-DCPU_$(CHIP_VARIANT) \
-	-DDEBUG \
 	-DIMXRT10XX \
 	-g3 -Wno-unused-parameter \
 	-ffunction-sections -fdata-sections -fstack-usage

ports/mimxrt10xx/common-hal/analogio/AnalogOut.c

@@ -29,7 +29,7 @@
 
 #include "shared-bindings/analogio/AnalogOut.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void common_hal_analogio_analogout_construct(analogio_analogout_obj_t *self, const mcu_pin_obj_t *pin) {
     mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_AnalogOut);

ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c

@@ -36,7 +36,7 @@
 
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/digitalio/DigitalInOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #define IOMUXC_SW_MUX_CTL_PAD_MUX_MODE_ALT5 5U
 

ports/mimxrt10xx/common-hal/microcontroller/__init__.c

@@ -37,7 +37,7 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/microcontroller/Processor.h"
 #include "supervisor/shared/safe_mode.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #define DBL_TAP_REG              SNVS->LPGPR[3]
 

ports/mimxrt10xx/common-hal/pwmio/PWMOut.c

@@ -35,7 +35,7 @@
 
 #include "fsl_pwm.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "periph.h"
 
 // Debug print support set to zero to enable debug printing

ports/mimxrt10xx/common-hal/rtc/RTC.c

@@ -33,7 +33,7 @@
 #include "shared-bindings/rtc/__init__.h"
 #include "shared-bindings/rtc/RTC.h"
 #include "common-hal/rtc/RTC.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "fsl_snvs_hp.h"
 

ports/nrf/Makefile

@@ -84,14 +84,6 @@ INC += -I../../lib/mp-readline
 INC += -I../../lib/tinyusb/src
 INC += -I../../supervisor/shared/usb
 
-ifeq ($(MCU_CHIP),nrf52833)
-  OPTIMIZATION_FLAGS ?= -Os -flto -flto-partition=one
-else
-  ifeq ($(INTERNAL_FLASH_FILESYSTEM),1)
-    OPTIMIZATION_FLAGS ?= -Os -flto
-  endif
-endif
-
 #Debugging/Optimization
 ifeq ($(DEBUG), 1)
   CFLAGS += -ggdb3

ports/nrf/common-hal/analogio/AnalogIn.c

@@ -29,7 +29,7 @@
 #include "shared-bindings/analogio/AnalogIn.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "nrf_saadc.h"
 #include "nrf_gpio.h"
@@ -77,7 +77,7 @@ uint16_t common_hal_analogio_analogin_get_value(analogio_analogin_obj_t *self) {
     // Something else might have used the ADC in a different way,
     // so we completely re-initialize it.
 
-    nrf_saadc_value_t value;
+    nrf_saadc_value_t value = -1;
 
     const nrf_saadc_channel_config_t config = {
         .resistor_p = NRF_SAADC_RESISTOR_DISABLED,

ports/nrf/common-hal/analogio/AnalogOut.c

@@ -31,7 +31,7 @@
 
 #include "py/mperrno.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void common_hal_analogio_analogout_construct(analogio_analogout_obj_t *self, const mcu_pin_obj_t *pin) {
     mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_AnalogOut);

ports/nrf/common-hal/audiopwmio/PWMAudioOut.c

@@ -37,7 +37,7 @@
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "supervisor/shared/tick.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 // TODO: This should be the same size as PWMOut.c:pwms[], but there's no trivial way to accomplish that
 STATIC audiopwmio_pwmaudioout_obj_t *active_audio[4];

ports/nrf/common-hal/busio/I2C.c

@@ -32,7 +32,7 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "py/mperrno.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "nrfx_twim.h"
 #include "nrfx_spim.h"

ports/nrf/common-hal/busio/UART.c

@@ -33,7 +33,7 @@
 #include "py/mperrno.h"
 #include "py/runtime.h"
 #include "py/stream.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "nrfx_uarte.h"
 #include "nrf_gpio.h"

ports/nrf/common-hal/digitalio/DigitalInOut.c

@@ -26,7 +26,7 @@
 
 #include "shared-bindings/digitalio/DigitalInOut.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "nrf_gpio.h"
 

ports/nrf/common-hal/microcontroller/Processor.c

@@ -31,7 +31,6 @@
 
 #include "common-hal/alarm/__init__.h"
 #include "shared-bindings/microcontroller/ResetReason.h"
-#include "supervisor/shared/translate.h"
 
 #include "nrfx_saadc.h"
 #ifdef BLUETOOTH_SD
@@ -72,7 +71,7 @@ uint32_t common_hal_mcu_processor_get_frequency(void) {
 }
 
 float common_hal_mcu_processor_get_voltage(void) {
-    nrf_saadc_value_t value;
+    nrf_saadc_value_t value = -1;
 
     const nrf_saadc_channel_config_t config = {
         .resistor_p = NRF_SAADC_RESISTOR_DISABLED,

ports/nrf/common-hal/pulseio/PulseOut.c

@@ -35,7 +35,7 @@
 #include "py/runtime.h"
 #include "shared-bindings/pulseio/PulseOut.h"
 #include "shared-bindings/pwmio/PWMOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 // A single timer is shared amongst all PulseOut objects under the assumption that
 // the code is single threaded.

ports/nrf/common-hal/pwmio/PWMOut.c

@@ -30,7 +30,7 @@
 #include "py/runtime.h"
 #include "common-hal/pwmio/PWMOut.h"
 #include "shared-bindings/pwmio/PWMOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "nrf_gpio.h"
 

ports/nrf/common-hal/rtc/RTC.c

@@ -33,7 +33,7 @@
 #include "common-hal/rtc/RTC.h"
 #include "shared-bindings/rtc/RTC.h"
 #include "supervisor/port.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 // This is the time in seconds since 2000 that the RTC was started.
 __attribute__((section(".uninitialized"))) static uint32_t rtc_offset[3];

ports/nrf/mpconfigport.mk

@@ -71,6 +71,11 @@ NRF_DEFINES += -DNRF52840_XXAA -DNRF52840
 # Defined here because system_nrf52840.c doesn't #include any of our own include files.
 CFLAGS += -DCONFIG_NFCT_PINS_AS_GPIOS
 
+ifeq ($(INTERNAL_FLASH_FILESYSTEM),1)
+  OPTIMIZATION_FLAGS ?= -Os
+  CIRCUITPY_LTO=balanced
+endif
+
 else
 ifeq ($(MCU_CHIP),nrf52833)
 MCU_SERIES = m4
@@ -87,5 +92,8 @@ SOFTDEV_VERSION ?= 7.0.1
 BOOT_SETTING_ADDR = 0x7F000
 NRF_DEFINES += -DNRF52833_XXAA -DNRF52833
 
+OPTIMIZATION_FLAGS ?= -Os
+
+CIRCUITPY_LTO=one
 endif
 endif

ports/raspberrypi/bindings/rp2pio/StateMachine.c

@@ -40,7 +40,7 @@
 #include "py/mperrno.h"
 #include "py/objproperty.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 
 //| class StateMachine:

ports/raspberrypi/common-hal/analogio/AnalogIn.c

@@ -28,7 +28,7 @@
 #include "shared-bindings/analogio/AnalogIn.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "src/rp2_common/hardware_adc/include/hardware/adc.h"
 

ports/raspberrypi/common-hal/analogio/AnalogOut.c

@@ -31,7 +31,7 @@
 
 #include "py/mperrno.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void common_hal_analogio_analogout_construct(analogio_analogout_obj_t *self, const mcu_pin_obj_t *pin) {
     mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_AnalogOut);

ports/raspberrypi/common-hal/audiobusio/I2SOut.c

@@ -37,7 +37,7 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-module/audiocore/__init__.h"
 #include "bindings/rp2pio/StateMachine.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 const uint16_t i2s_program[] = {
 // ; Load the next set of samples

ports/raspberrypi/common-hal/audiobusio/PDMIn.c

@@ -32,7 +32,7 @@
 #include "py/runtime.h"
 #include "shared-bindings/audiobusio/PDMIn.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "audio_dma.h"
 

ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c

@@ -39,7 +39,7 @@
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/microcontroller/Processor.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "src/rp2040/hardware_structs/include/hardware/structs/dma.h"
 #include "src/rp2_common/hardware_pwm/include/hardware/pwm.h"

ports/raspberrypi/common-hal/countio/Counter.c

@@ -2,7 +2,7 @@
 
 #include "py/runtime.h"
 #include "py/mpstate.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "shared-bindings/countio/Edge.h"
 #include "shared-bindings/digitalio/Pull.h"

ports/raspberrypi/common-hal/digitalio/DigitalInOut.c

@@ -32,7 +32,7 @@
 
 #include "common-hal/microcontroller/Pin.h"
 #include "shared-bindings/digitalio/DigitalInOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "src/rp2_common/hardware_gpio/include/hardware/gpio.h"
 

ports/raspberrypi/common-hal/microcontroller/__init__.c

@@ -38,7 +38,7 @@
 #include "supervisor/filesystem.h"
 #include "supervisor/port.h"
 #include "supervisor/shared/safe_mode.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "src/rp2040/hardware_structs/include/hardware/structs/sio.h"
 #include "src/rp2_common/hardware_sync/include/hardware/sync.h"

ports/raspberrypi/common-hal/pulseio/PulseIn.c

@@ -32,7 +32,7 @@
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/pulseio/PulseIn.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "bindings/rp2pio/StateMachine.h"
 #include "common-hal/pulseio/PulseIn.h"
 

ports/raspberrypi/common-hal/pulseio/PulseOut.c

@@ -33,7 +33,7 @@
 #include "shared-bindings/pwmio/PWMOut.h"
 #include "shared-bindings/microcontroller/__init__.h"
 #include "common-hal/pwmio/PWMOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "src/rp2040/hardware_structs/include/hardware/structs/pwm.h"
 #include "src/rp2_common/hardware_gpio/include/hardware/gpio.h"
 #include "src/rp2_common/hardware_pwm/include/hardware/pwm.h"

ports/raspberrypi/common-hal/pwmio/PWMOut.c

@@ -32,7 +32,7 @@
 #include "shared-bindings/pwmio/PWMOut.h"
 #include "shared-bindings/microcontroller/Processor.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "src/rp2040/hardware_regs/include/hardware/platform_defs.h"
 #include "src/rp2_common/hardware_clocks/include/hardware/clocks.h"

ports/stm/Makefile

@@ -88,8 +88,6 @@ else
 	CFLAGS += -DNDEBUG
 	OPTIMIZATION_FLAGS ?= -O2 -fno-inline-functions
 	CFLAGS += -ggdb3
-	# TODO: Test with -flto
-	# CFLAGS += -flto
 endif
 
 # to override compiler optimization level, set in boards/$(BOARD)/mpconfigboard.mk

ports/stm/common-hal/analogio/AnalogIn.c

@@ -27,7 +27,7 @@
 
 #include "common-hal/analogio/AnalogIn.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "shared-bindings/microcontroller/Pin.h"
 

ports/stm/common-hal/analogio/AnalogOut.c

@@ -33,7 +33,7 @@
 
 #include "shared-bindings/analogio/AnalogOut.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "common-hal/microcontroller/Pin.h"
 

ports/stm/common-hal/busio/I2C.c

@@ -31,7 +31,7 @@
 #include "py/runtime.h"
 
 #include "shared-bindings/microcontroller/__init__.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "shared-bindings/microcontroller/Pin.h"
 
 // I2C timing specs for the H7 and F7

ports/stm/common-hal/busio/SPI.c

@@ -33,7 +33,7 @@
 
 #include "shared-bindings/microcontroller/__init__.h"
 #include "supervisor/board.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "shared-bindings/microcontroller/Pin.h"
 
 // Note that any bugs introduced in this file can cause crashes at startup

ports/stm/common-hal/busio/UART.c

@@ -35,7 +35,7 @@
 #include "py/mperrno.h"
 #include "py/runtime.h"
 #include "py/stream.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #define ALL_UARTS 0xFFFF
 

ports/stm/common-hal/digitalio/DigitalInOut.c

@@ -28,7 +28,7 @@
 #include "shared-bindings/digitalio/DigitalInOut.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 // The HAL is sparse on obtaining register information, so we use the LLs here.
 #if (CPY_STM32H7)

ports/stm/common-hal/microcontroller/Processor.c

@@ -32,7 +32,7 @@
 #endif
 #include "common-hal/microcontroller/Processor.h"
 #include "shared-bindings/microcontroller/ResetReason.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include STM32_HAL_H
 

ports/stm/common-hal/pulseio/PulseOut.c

@@ -33,7 +33,7 @@
 #include "py/runtime.h"
 #include "shared-bindings/pulseio/PulseOut.h"
 #include "shared-bindings/pwmio/PWMOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include STM32_HAL_H
 #include "shared-bindings/microcontroller/Pin.h"

ports/stm/common-hal/pwmio/PWMOut.c

@@ -29,7 +29,7 @@
 #include "py/runtime.h"
 #include "common-hal/pwmio/PWMOut.h"
 #include "shared-bindings/pwmio/PWMOut.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "shared-bindings/microcontroller/__init__.h"
 #include STM32_HAL_H

ports/stm/common-hal/sdioio/SDCard.c

@@ -32,7 +32,7 @@
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/util.h"
 #include "supervisor/board.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 #include "common-hal/microcontroller/Pin.h"
 #include "shared-bindings/microcontroller/Pin.h"
 

ports/stm/peripherals/timers.c

@@ -29,7 +29,7 @@
 #include "py/gc.h"
 #include "py/obj.h"
 #include "py/runtime.h"
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"

ports/unix/modffi.c

@@ -38,7 +38,7 @@
 #include "py/objint.h"
 #include "py/gc.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 /*
  * modffi uses character codes to encode a value type, based on "struct"

ports/unix/modmachine.c

@@ -36,7 +36,7 @@
 #include "extmod/machine_signal.h"
 #include "extmod/machine_pulse.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_PLAT_DEV_MEM
 #include <errno.h>

py/argcheck.c

@@ -29,7 +29,7 @@
 
 #include "py/runtime.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 void mp_arg_check_num_sig(size_t n_args, size_t n_kw, uint32_t sig) {
     // TODO maybe take the function name as an argument so we can print nicer error messages

py/bc.c

@@ -33,7 +33,7 @@
 #include "py/bc0.h"
 #include "py/bc.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_DEBUG_VERBOSE // print debugging info
 #define DEBUG_PRINT (1)

py/binary.c

@@ -36,7 +36,7 @@
 #include "py/objint.h"
 #include "py/runtime.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 // Helpers to work with binary-encoded data
 

py/builtinevex.c

@@ -31,7 +31,7 @@
 #include "py/runtime.h"
 #include "py/builtin.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_PY_BUILTINS_COMPILE
 

py/builtinhelp.c

@@ -32,6 +32,8 @@
 #include "py/mpconfig.h"
 #include "py/objmodule.h"
 
+#include "supervisor/shared/translate/translate.h"
+
 #if MICROPY_PY_BUILTINS_HELP
 
 const char mp_help_default_text[] =

py/builtinimport.c

@@ -39,7 +39,7 @@
 #include "py/builtin.h"
 #include "py/frozenmod.h"
 
-#include "supervisor/shared/translate.h"
+#include "supervisor/shared/translate/translate.h"
 
 #if MICROPY_DEBUG_VERBOSE // print debugging info
 #define DEBUG_PRINT (1)