djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.

Browse Source
This commit is contained in:
Dan Halbert 2019-02-18 22:44:31 -05:00
parent ef802c91e7
commit 9c24c804fb
13 changed files with 118 additions and 99 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/wiznet5k/internet/dhcp/dhcp.c
View File

@ -577,7 +577,7 @@ int8_t parseDHCPMSG(void)
uint8_t * p;
uint8_t * e;
uint8_t type;
uint8_t type = 0;
uint8_t opt_len;
if((len = getSn_RX_RSR(DHCP_SOCKET)) > 0)
@ -973,7 +973,3 @@ uint32_t getDHCPLeasetime(void)
{
return dhcp_lease_time;
}

6
ports/atmel-samd/Makefile
View File

@ -102,9 +102,9 @@ ifeq ($(DEBUG), 1)
# Turn on Python modules useful for debugging (e.g. uheap, ustack).
CFLAGS += -ggdb
# You may want to disable -flto if it interferes with debugging.
# CFLAGS += -flto
CFLAGS += -flto
# You may want to enable these flags to make setting breakpoints easier.
CFLAGS += -fno-inline -fno-ipa-sra
# CFLAGS += -fno-inline -fno-ipa-sra
ifeq ($(CHIP_FAMILY), samd21)
CFLAGS += -DENABLE_MICRO_TRACE_BUFFER
endif
@ -112,7 +112,7 @@ else
# -finline-limit can shrink the image size.
# -finline-limit=80 or so is similar to not having it on.
# There is no simple default value, though.
ifdef INTERNAL_FLASH_FILESYSTEM
ifeq ($(INTERNAL_FLASH_FILESYSTEM),1)
CFLAGS += -finline-limit=50
endif
ifdef CFLAGS_INLINE_LIMIT

1
ports/atmel-samd/boards/sam32/mpconfigboard.mk
View File

@ -4,7 +4,6 @@ USB_PID = 0xEDBE
USB_PRODUCT = "SAM32"
USB_MANUFACTURER = "maholli"
QSPI_FLASH_FILESYSTEM = 0
INTERNAL_FLASH_FILESYSTEM = 1
LONGINT_IMPL = MPZ

15
ports/atmel-samd/common-hal/analogio/AnalogOut.c
View File

@ -31,6 +31,7 @@
#include "py/runtime.h"
#include "shared-bindings/analogio/AnalogOut.h"
#include "shared-bindings/audioio/AudioOut.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "supervisor/shared/translate.h"
@ -138,5 +139,17 @@ void common_hal_analogio_analogout_set_value(analogio_analogout_obj_t *self,
}
void analogout_reset(void) {
// AudioOut resets the DAC in case its been used for audio which requires special handling.
// audioout_reset also resets the DAC, and does a smooth ramp down to avoid clicks
// if it was enabled, so do that instead if AudioOut is enabled.
#if CIRCUITPY_AUDIOIO
audioout_reset();
#else
#ifdef SAMD21
while (DAC->STATUS.reg & DAC_STATUS_SYNCBUSY) {}
#endif
#ifdef SAMD51
while (DAC->SYNCBUSY.reg & DAC_SYNCBUSY_SWRST) {}
#endif
DAC->CTRLA.reg |= DAC_CTRLA_SWRST;
#endif
}

11
ports/atmel-samd/supervisor/port.c
View File

@ -194,20 +194,23 @@ safe_mode_t port_init(void) {
void reset_port(void) {
reset_sercoms();
#if defined(EXPRESS_BOARD) && !defined(__SAMR21G18A__)
#if CIRCUITPY_AUDIOIO
audio_dma_reset();
audioout_reset();
#if !defined(__SAMD51G19A__) && !defined(__SAMD51G18A__)
#endif
#if CIRCUITPY_AUDIOBUSIO
i2sout_reset();
#endif
//pdmin_reset();
#endif
#ifdef SAMD21
#if CIRCUITPY_TOUCHIO
touchin_reset();
#endif
eic_reset();
#if CIRCUITPY_PULSEIO
pulseout_reset();
pwmout_reset();
#endif
#if CIRCUITPY_ANALOGIO
analogin_reset();

4
ports/nrf/boards/feather_nrf52840_express/mpconfigboard.h
View File

@ -37,7 +37,7 @@
#define MICROPY_HW_LED_STATUS (&pin_P1_15)
#ifdef QSPI_FLASH_FILESYSTEM
#if QSPI_FLASH_FILESYSTEM
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 17)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 22)
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 23)
@ -46,7 +46,7 @@
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 20)
#endif
#ifdef SPI_FLASH_FILESYSTEM
#if SPI_FLASH_FILESYSTEM
#define SPI_FLASH_MOSI_PIN &pin_P0_17
#define SPI_FLASH_MISO_PIN &pin_P0_22
#define SPI_FLASH_SCK_PIN &pin_P0_19

4
ports/nrf/boards/particle_argon/mpconfigboard.h
View File

@ -39,7 +39,7 @@
#define MICROPY_HW_RGB_LED_GREEN (&pin_P0_14)
#define MICROPY_HW_RGB_LED_BLUE (&pin_P0_15)
#ifdef QSPI_FLASH_FILESYSTEM
#if QSPI_FLASH_FILESYSTEM
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 20)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 21)
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 22)
@ -48,7 +48,7 @@
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 17)
#endif
#ifdef SPI_FLASH_FILESYSTEM
#if SPI_FLASH_FILESYSTEM
#define SPI_FLASH_MOSI_PIN &pin_P0_20
#define SPI_FLASH_MISO_PIN &pin_P0_21
#define SPI_FLASH_SCK_PIN &pin_P0_19

4
ports/nrf/boards/particle_boron/mpconfigboard.h
View File

@ -39,7 +39,7 @@
#define MICROPY_HW_RGB_LED_GREEN (&pin_P0_14)
#define MICROPY_HW_RGB_LED_BLUE (&pin_P0_15)
#ifdef QSPI_FLASH_FILESYSTEM
#if QSPI_FLASH_FILESYSTEM
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 20)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 21)
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 22)
@ -48,7 +48,7 @@
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 17)
#endif
#ifdef SPI_FLASH_FILESYSTEM
#if SPI_FLASH_FILESYSTEM
#define SPI_FLASH_MOSI_PIN &pin_P0_20
#define SPI_FLASH_MISO_PIN &pin_P0_21
#define SPI_FLASH_SCK_PIN &pin_P0_19

4
ports/nrf/boards/particle_xenon/mpconfigboard.h
View File

@ -39,7 +39,7 @@
#define MICROPY_HW_RGB_LED_GREEN (&pin_P0_14)
#define MICROPY_HW_RGB_LED_BLUE (&pin_P0_15)
#ifdef QSPI_FLASH_FILESYSTEM
#if QSPI_FLASH_FILESYSTEM
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 20)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 21)
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 22)
@ -48,7 +48,7 @@
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 17)
#endif
#ifdef SPI_FLASH_FILESYSTEM
#if SPI_FLASH_FILESYSTEM
#define SPI_FLASH_MOSI_PIN &pin_P0_20
#define SPI_FLASH_MISO_PIN &pin_P0_21
#define SPI_FLASH_SCK_PIN &pin_P0_19

4
ports/nrf/boards/pca10056/mpconfigboard.h
View File

@ -49,7 +49,7 @@
// Quad mode: If all DATA0 --> DATA3 are valid
// Dual mode: If DATA0 and DATA1 are valid while either DATA2 and/or DATA3 are invalid
// Single mode: If only DATA0 is valid
#ifdef QSPI_FLASH_FILESYSTEM
#if QSPI_FLASH_FILESYSTEM
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 20)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 21)
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 22)
@ -58,7 +58,7 @@
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 17)
#endif
#ifdef SPI_FLASH_FILESYSTEM
#if SPI_FLASH_FILESYSTEM
#define SPI_FLASH_MOSI_PIN &pin_P0_20
#define SPI_FLASH_MISO_PIN &pin_P0_21
#define SPI_FLASH_SCK_PIN &pin_P0_19

4
ports/nrf/boards/sparkfun_nrf52840_mini/mpconfigboard.h
View File

@ -49,7 +49,7 @@
// Quad mode: If all DATA0 --> DATA3 are valid
// Dual mode: If DATA0 and DATA1 are valid while either DATA2 and/or DATA3 are invalid
// Single mode: If only DATA0 is valid
/*#ifdef QSPI_FLASH_FILESYSTEM
/*#if QSPI_FLASH_FILESYSTEM
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 20)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 21)
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 22)
@ -58,7 +58,7 @@
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 17)
#endif
#ifdef SPI_FLASH_FILESYSTEM
#if SPI_FLASH_FILESYSTEM
#define SPI_FLASH_MOSI_PIN &pin_P0_20
#define SPI_FLASH_MISO_PIN &pin_P0_21
#define SPI_FLASH_SCK_PIN &pin_P0_19

4
ports/nrf/boards/sparkfun_nrf52840_mini/mpconfigboard.mk
View File

@ -21,6 +21,4 @@ endif
NRF_DEFINES += -DNRF52840_XXAA -DNRF52840
QSPI_FLASH_FILESYSTEM = 0
EXTERNAL_FLASH_DEVICE_COUNT = 0
EXTERNAL_FLASH_DEVICES =
INTERNAL_FLASH_FILESYSTEM = 1

14
supervisor/supervisor.mk
View File

@ -17,6 +17,17 @@ ifndef $(NO_USB)
NO_USB = $(wildcard supervisor/usb.c)
endif
ifneq ($(INTERNAL_FLASH_FILESYSTEM),)
CFLAGS += -DINTERNAL_FLASH_FILESYSTEM=$(INTERNAL_FLASH_FILESYSTEM)
endif
ifneq ($(QSPI_FLASH_FILESYSTEM),)
# EXPRESS_BOARD is obsolete and should be removed when samd-peripherals is updated.
CFLAGS += -DQSPI_FLASH_FILESYSTEM=$(QSPI_FLASH_FILESYSTEM) -DEXPRESS_BOARD
endif
ifneq ($(SPI_FLASH_FILESYSTEM),)
# EXPRESS_BOARD is obsolete and should be removed when samd-peripherals is updated.
CFLAGS += -DSPI_FLASH_FILESYSTEM=$(SPI_FLASH_FILESYSTEM) -DEXPRESS_BOARD
endif
# Choose which flash filesystem impl to use.
# (Right now INTERNAL_FLASH_FILESYSTEM and SPI_FLASH_FILESYSTEM are mutually exclusive.
@ -27,11 +38,10 @@ ifdef EXTERNAL_FLASH_DEVICES
SRC_SUPERVISOR += supervisor/shared/external_flash/external_flash.c
ifeq ($(SPI_FLASH_FILESYSTEM),1)
CFLAGS += -DSPI_FLASH_FILESYSTEM
SRC_SUPERVISOR += supervisor/shared/external_flash/spi_flash.c
else
endif
ifeq ($(QSPI_FLASH_FILESYSTEM),1)
CFLAGS += -DQSPI_FLASH_FILESYSTEM
SRC_SUPERVISOR += supervisor/qspi_flash.c supervisor/shared/external_flash/qspi_flash.c
endif
else