Changed unions to ReadableBuffer and WriteableBuffer

shared-bindings/_bleio/Address.c

@@ -38,7 +38,7 @@
 //|     """Encapsulates the address of a BLE device."""
 //|
 
-//|     def __init__(self, address: Union[bytes, bytearray, memoryview], address_type: int):
+//|     def __init__(self, address: ReadableBuffer, address_type: int):
 //|         """Create a new Address object encapsulating the address value.
 //|         The value itself can be one of:
 //|

shared-bindings/_bleio/CharacteristicBuffer.c

@@ -110,7 +110,7 @@ STATIC void check_for_deinit(bleio_characteristic_buffer_obj_t *self) {
 //|         :rtype: bytes or None"""
 //|         ...
 //|
-//|     def readinto(self, buf: Union[bytearray, memoryview]) -> Optional[int]:
+//|     def readinto(self, buf: WriteableBuffer) -> Optional[int]:
 //|         """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes.
 //|
 //|         :return: number of bytes read and stored into ``buf``

shared-bindings/_bleio/Descriptor.c

@@ -167,7 +167,7 @@ const mp_obj_property_t bleio_descriptor_characteristic_obj = {
                (mp_obj_t)&mp_const_none_obj },
 };
 
-//|     value: Union[bytearray, memoryview] = ...
+//|     value: WriteableBuffer = ...
 //|     """The value of this descriptor."""
 //|
 STATIC mp_obj_t bleio_descriptor_get_value(mp_obj_t self_in) {

shared-bindings/_bleio/PacketBuffer.c

@@ -93,7 +93,7 @@ STATIC void check_for_deinit(bleio_packet_buffer_obj_t *self) {
     }
 }
 
-//|     def readinto(self, buf: Union[bytearray, memoryview]) -> int:
+//|     def readinto(self, buf: WriteableBuffer) -> int:
 //|         """Reads a single BLE packet into the ``buf``. Raises an exception if the next packet is longer
 //|         than the given buffer. Use `packet_size` to read the maximum length of a single packet.
 //|

shared-bindings/_bleio/UUID.c

@@ -186,7 +186,7 @@ const mp_obj_property_t bleio_uuid_size_obj = {
 };
 
 
-//|     def pack_into(self, buffer: Union[bytearray, memoryview], offset: int = 0) -> None:
+//|     def pack_into(self, buffer: WriteableBuffer, offset: int = 0) -> None:
 //|         """Packs the UUID into the given buffer at the given offset."""
 //|         ...
 //|

shared-bindings/aesio/aes.c

@@ -12,7 +12,7 @@
 //| class AES:
 //|     """Encrypt and decrypt AES streams"""
 //|
-//|     def __init__(self, key: Union[bytes, bytearray, memoryview], mode: int=0, iv: Union[bytes, bytearray, memoryview]=None, segment_size: int=8) -> AES:
+//|     def __init__(self, key: ReadableBuffer, mode: int=0, iv: ReadableBuffer=None, segment_size: int=8) -> AES:
 //|         """Create a new AES state with the given key.
 //|
 //|            :param bytearray key: A 16-, 24-, or 32-byte key
@@ -152,7 +152,7 @@ STATIC void validate_length(aesio_aes_obj_t *self, size_t src_length,
   }
 }
 
-//|     def encrypt_into(src: Union[bytearray, memoryview], dest: Union[bytearray, memoryview]) -> None:
+//|     def encrypt_into(src: WriteableBuffer, dest: WriteableBuffer) -> None:
 //|         """Encrypt the buffer from ``src`` into ``dest``.
 //|
 //|            For ECB mode, the buffers must be 16 bytes long.  For CBC mode, the
@@ -183,7 +183,7 @@ STATIC mp_obj_t aesio_aes_encrypt_into(mp_obj_t aesio_obj, mp_obj_t src,
 STATIC MP_DEFINE_CONST_FUN_OBJ_3(aesio_aes_encrypt_into_obj,
                                  aesio_aes_encrypt_into);
 
-//|     def decrypt_into(src: Union[bytearray, memoryview], dest: Union[bytearray, memoryview]) -> None:
+//|     def decrypt_into(src: WriteableBuffer, dest: WriteableBuffer) -> None:
 //|
 //|         """Decrypt the buffer from ``src`` into ``dest``.
 //|            For ECB mode, the buffers must be 16 bytes long.  For CBC mode, the

shared-bindings/audiobusio/PDMIn.c

@@ -168,7 +168,7 @@ STATIC mp_obj_t audiobusio_pdmin_obj___exit__(size_t n_args, const mp_obj_t *arg
 STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(audiobusio_pdmin___exit___obj, 4, 4, audiobusio_pdmin_obj___exit__);
 
 
-//|     def record(self, destination: Union[bytearray, memoryview], destination_length: int) -> None:
+//|     def record(self, destination: WriteableBuffer, destination_length: int) -> None:
 //|         """Records destination_length bytes of samples to destination. This is
 //|         blocking.
 //|

shared-bindings/audiocore/WaveFile.c

@@ -40,7 +40,7 @@
 //|     be 8 bit unsigned or 16 bit signed. If a buffer is provided, it will be used instead of allocating
 //|     an internal buffer."""
 //|
-//|     def __init__(self, file: typing.BinaryIO, buffer: Union[bytes, bytearray, memoryview]):
+//|     def __init__(self, file: typing.BinaryIO, buffer: ReadableBuffer):
 //|         """Load a .wav file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`.
 //|
 //|         :param typing.BinaryIO file: Already opened wave file

shared-bindings/audiomp3/MP3Decoder.c

@@ -37,7 +37,7 @@
 //| class MP3:
 //|     """Load a mp3 file for audio playback"""
 //|
-//|     def __init__(self, file: typing.BinaryIO, buffer: Union[bytearray, memoryview]):
+//|     def __init__(self, file: typing.BinaryIO, buffer: WriteableBuffer):
 //|
 //|         """Load a .mp3 file for playback with `audioio.AudioOut` or `audiobusio.I2SOut`.
 //|

shared-bindings/bitbangio/I2C.c

@@ -165,7 +165,7 @@ STATIC mp_obj_t bitbangio_i2c_obj_unlock(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_i2c_unlock_obj, bitbangio_i2c_obj_unlock);
 
-//|     def readfrom_into(self, address: int, buffer: Union[bytearray, memoryview], *, start: int = 0, end: int = None) -> None:
+//|     def readfrom_into(self, address: int, buffer: WriteableBuffer, *, start: int = 0, end: int = None) -> None:
 //|         """Read into ``buffer`` from the device selected by ``address``.
 //|         The number of bytes read will be the length of ``buffer``.
 //|         At least one byte must be read.
@@ -217,7 +217,7 @@ STATIC mp_obj_t bitbangio_i2c_readfrom_into(size_t n_args, const mp_obj_t *pos_a
 }
 MP_DEFINE_CONST_FUN_OBJ_KW(bitbangio_i2c_readfrom_into_obj, 3, bitbangio_i2c_readfrom_into);
 
-//|     def writeto(self, address: int, buffer: Union[bytes, bytearray, memoryview], *, start: int = 0, end: int = None, stop: bool = True) -> None:
+//|     def writeto(self, address: int, buffer: ReadableBuffer, *, start: int = 0, end: int = None, stop: bool = True) -> None:
 //|         """Write the bytes from ``buffer`` to the device selected by ``address`` and then transmits a
 //|         stop bit. Use `writeto_then_readfrom` when needing a write, no stop and repeated start
 //|         before a read.
@@ -277,7 +277,7 @@ STATIC mp_obj_t bitbangio_i2c_writeto(size_t n_args, const mp_obj_t *pos_args, m
 STATIC MP_DEFINE_CONST_FUN_OBJ_KW(bitbangio_i2c_writeto_obj, 1, bitbangio_i2c_writeto);
 
 
-//|     def writeto_then_readfrom(self, address: int, out_buffer: Union[bytearray, memoryview], in_buffer: Union[bytes, bytearray, memoryview], *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> None:
+//|     def writeto_then_readfrom(self, address: int, out_buffer: WriteableBuffer, in_buffer: ReadableBuffer, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> None:
 //|         """Write the bytes from ``out_buffer`` to the device selected by ``address``, generate no stop
 //|         bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and
 //|         ``in_buffer`` can be the same buffer because they are used sequentially.

shared-bindings/bitbangio/SPI.c

@@ -200,7 +200,7 @@ STATIC mp_obj_t bitbangio_spi_obj_unlock(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(bitbangio_spi_unlock_obj, bitbangio_spi_obj_unlock);
 
-//|     def write(self, buf: Union[bytes, bytearray, memoryview]) -> None:
+//|     def write(self, buf: ReadableBuffer) -> None:
 //|         """Write the data contained in ``buf``. Requires the SPI being locked.
 //|         If the buffer is empty, nothing happens."""
 //|         ...
@@ -224,7 +224,7 @@ STATIC mp_obj_t bitbangio_spi_write(mp_obj_t self_in, mp_obj_t wr_buf) {
 MP_DEFINE_CONST_FUN_OBJ_2(bitbangio_spi_write_obj, bitbangio_spi_write);
 
 
-//|     def readinto(self, buf: Union[bytearray, memoryview]) -> None:
+//|     def readinto(self, buf: WriteableBuffer) -> None:
 //|         """Read into the buffer specified by ``buf`` while writing zeroes.
 //|         Requires the SPI being locked.
 //|         If the number of bytes to read is 0, nothing happens."""
@@ -248,7 +248,7 @@ STATIC mp_obj_t bitbangio_spi_readinto(size_t n_args, const mp_obj_t *args) {
 }
 MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(bitbangio_spi_readinto_obj, 2, 2, bitbangio_spi_readinto);
 
-//|     def write_readinto(self, buffer_out: Union[bytes, bytearray, memoryview], buffer_in: Union[bytearray, memoryview], *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> None:
+//|     def write_readinto(self, buffer_out: ReadableBuffer, buffer_in: WriteableBuffer, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> None:
 //|         """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``.
 //|         The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]``
 //|         must be equal.

shared-bindings/busio/I2C.c

@@ -176,7 +176,7 @@ STATIC mp_obj_t busio_i2c_obj_unlock(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_i2c_unlock_obj, busio_i2c_obj_unlock);
 
-//|     def readfrom_into(self, address: int, buffer: Union[bytearray, memoryview], *, start: int = 0, end: int = None) -> None:
+//|     def readfrom_into(self, address: int, buffer: WriteableBuffer, *, start: int = 0, end: int = None) -> None:
 //|          """Read into ``buffer`` from the device selected by ``address``.
 //|          The number of bytes read will be the length of ``buffer``.
 //|          At least one byte must be read.
@@ -228,7 +228,7 @@ STATIC mp_obj_t busio_i2c_readfrom_into(size_t n_args, const mp_obj_t *pos_args,
 }
 MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_readfrom_into_obj, 3, busio_i2c_readfrom_into);
 
-//|     def writeto(self, address: int, buffer: Union[bytes, bytearray, memoryview], *, start: int = 0, end: int = None, stop: bool = True) -> None:
+//|     def writeto(self, address: int, buffer: ReadableBuffer, *, start: int = 0, end: int = None, stop: bool = True) -> None:
 //|          """Write the bytes from ``buffer`` to the device selected by ``address``.
 //|          Transmits a stop bit when stop is True. Setting stop=False is deprecated and stop will be
 //|          removed in CircuitPython 6.x. Use `writeto_then_readfrom` when needing a write, no stop and
@@ -287,7 +287,7 @@ STATIC mp_obj_t busio_i2c_writeto(size_t n_args, const mp_obj_t *pos_args, mp_ma
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_KW(busio_i2c_writeto_obj, 1, busio_i2c_writeto);
 
-//|     def writeto_then_readfrom(self, address: int, out_buffer: Union[bytes, bytearray, memoryview], in_buffer: Union[bytearray, memoryview], *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> None:
+//|     def writeto_then_readfrom(self, address: int, out_buffer: ReadableBuffer, in_buffer: WriteableBuffer, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> None:
 //|          """Write the bytes from ``out_buffer`` to the device selected by ``address``, generate no stop
 //|          bit, generate a repeated start and read into ``in_buffer``. ``out_buffer`` and
 //|          ``in_buffer`` can be the same buffer because they are used sequentially.

shared-bindings/busio/SPI.c

@@ -228,7 +228,7 @@ STATIC mp_obj_t busio_spi_obj_unlock(mp_obj_t self_in) {
 }
 MP_DEFINE_CONST_FUN_OBJ_1(busio_spi_unlock_obj, busio_spi_obj_unlock);
 
-//|     def write(self, buffer: Union[bytes, bytearray, memoryview], *, start: int = 0, end: int = None) -> None:
+//|     def write(self, buffer: ReadableBuffer, *, start: int = 0, end: int = None) -> None:
 //|         """Write the data contained in ``buffer``. The SPI object must be locked.
 //|         If the buffer is empty, nothing happens.
 //|
@@ -314,7 +314,7 @@ STATIC mp_obj_t busio_spi_readinto(size_t n_args, const mp_obj_t *pos_args, mp_m
 }
 MP_DEFINE_CONST_FUN_OBJ_KW(busio_spi_readinto_obj, 2, busio_spi_readinto);
 
-//|     def write_readinto(self, buffer_out: Union[bytes, bytearray, memoryview], buffer_in: Union[bytes, bytearray, memoryview], *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> None:
+//|     def write_readinto(self, buffer_out: ReadableBuffer, buffer_in: ReadableBuffer, *, out_start: int = 0, out_end: int = None, in_start: int = 0, in_end: int = None) -> None:
 //|         """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``.
 //|         The SPI object must be locked.
 //|         The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]``

shared-bindings/busio/UART.c

@@ -190,7 +190,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_
 //|         ...
 //|
 
-//|     def readinto(self, buf: Union[bytearray, memoryview]) -> Optional[int]:
+//|     def readinto(self, buf: WriteableBuffer) -> Optional[int]:
 //|         """Read bytes into the ``buf``. Read at most ``len(buf)`` bytes.
 //|
 //|         :return: number of bytes read and stored into ``buf``
@@ -208,7 +208,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_
 //|         ...
 //|
 
-//|     def write(self, buf: Union[bytearray, memoryview]) -> Optional[int]:
+//|     def write(self, buf: WriteableBuffer) -> Optional[int]:
 //|         """Write the buffer of bytes to the bus.
 //|
 //|       *New in CircuitPython 4.0:* ``buf`` must be bytes, not a string.