diff --git a/stmhal/hal/f2/src/stm32f2xx_hal_i2s_ex.c b/stmhal/hal/f2/src/stm32f2xx_hal_i2s_ex.c new file mode 100644 index 0000000000..35e5b77d66 --- /dev/null +++ b/stmhal/hal/f2/src/stm32f2xx_hal_i2s_ex.c @@ -0,0 +1 @@ +// dummy file to keep build system homogeneous across MCU series diff --git a/stmhal/hal/f4/src/stm32f4xx_hal_i2s_ex.c b/stmhal/hal/f4/src/stm32f4xx_hal_i2s_ex.c new file mode 100644 index 0000000000..c57b6dbce0 --- /dev/null +++ b/stmhal/hal/f4/src/stm32f4xx_hal_i2s_ex.c @@ -0,0 +1,752 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_i2s_ex.c + * @author MCD Application Team + * @version V1.1.0 + * @date 19-June-2014 + * @brief I2S HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2S extension peripheral: + * + Extension features Functions + * + @verbatim + ============================================================================== + ##### I2S Extension features ##### + ============================================================================== + [..] + (#) In I2S full duplex mode, each SPI peripheral is able to manage sending and receiving + data simultaneously using two data lines. Each SPI peripheral has an extended block + called I2Sxext (i.e I2S2ext for SPI2 and I2S3ext for SPI3). + (#) The extension block is not a full SPI IP, it is used only as I2S slave to + implement full duplex mode. The extension block uses the same clock sources + as its master. + + (#) Both I2Sx and I2Sx_ext can be configured as transmitters or receivers. + + [..] + (@) Only I2Sx can deliver SCK and WS to I2Sx_ext in full duplex mode, where + I2Sx can be I2S2 or I2S3. + + ##### How to use this driver ##### + =============================================================================== + [..] + Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send and receive in the same time an amount of data in blocking mode using HAL_I2S_TransmitReceive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send and receive in the same time an amount of data in non blocking mode using HAL_I2S_TransmitReceive_IT() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send and receive an amount of data in non blocking mode (DMA) using HAL_I2S_TransmitReceive_DMA() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + (+) Pause the DMA Transfer using HAL_I2S_DMAPause() + (+) Resume the DMA Transfer using HAL_I2S_DMAResume() + (+) Stop the DMA Transfer using HAL_I2S_DMAStop() + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2014 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup I2SEx + * @brief I2S HAL module driver + * @{ + */ + +#ifdef HAL_I2S_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2SEx_Private_Functions + * @{ + */ + +/** @defgroup I2SEx_Group1 Extension features functions + * @brief Extension features functions + * +@verbatim + =============================================================================== + ##### Extension features Functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2S data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2S_TransmitReceive() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2S_TransmitReceive_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2S_TransmitReceive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2S_TxCpltCallback() + (++) HAL_I2S_RxCpltCallback() + (++) HAL_I2S_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Full-Duplex Transmit/Receive data in blocking mode. + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pTxData: a 16-bit pointer to the Transmit data buffer. + * @param pRxData: a 16-bit pointer to the Receive data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @param Timeout: Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart = 0; + uint32_t tmp1 = 0, tmp2 = 0; + + if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + /* Check the I2S State */ + if(hi2s->State == HAL_I2S_STATE_READY) + { + tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended + is selected during the I2S configuration phase, the Size parameter means the number + of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data + frame is selected the Size parameter means the number of 16-bit data length. */ + if((tmp1 == I2S_DATAFORMAT_24B)|| \ + (tmp2 == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = Size*2; + hi2s->TxXferCount = Size*2; + hi2s->RxXferSize = Size*2; + hi2s->RxXferCount = Size*2; + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set the I2S State busy TX/RX */ + hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; + + tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; + tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; + /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ + if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX)) + { + /* Check if the I2S is already enabled: The I2S is kept enabled at the end of transaction + to avoid the clock de-synchronization between Master and Slave. */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2Sext(receiver) before enabling I2Sx peripheral */ + I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE; + + /* Enable I2Sx peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + while(hi2s->TxXferCount > 0) + { + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hi2s->Instance->DR = (*pTxData++); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until RXNE flag is set */ + while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) != SPI_SR_RXNE) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + (*pRxData++) = I2SxEXT(hi2s->Instance)->DR; + + hi2s->TxXferCount--; + hi2s->RxXferCount--; + } + } + /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ + else + { + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral before the I2Sext*/ + __HAL_I2S_ENABLE(hi2s); + + /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */ + I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE; + } + else + { + /* Check if Master Receiver mode is selected */ + if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + } + while(hi2s->TxXferCount > 0) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until TXE flag is set */ + while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) != SPI_SR_TXE) + { + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + I2SxEXT(hi2s->Instance)->DR = (*pTxData++); + + /* Wait until RXNE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + (*pRxData++) = hi2s->Instance->DR; + + hi2s->TxXferCount--; + hi2s->RxXferCount--; + } + } + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pTxData: a 16-bit pointer to the Transmit data buffer. + * @param pRxData: a 16-bit pointer to the Receive data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size) +{ + uint32_t tmp1 = 0, tmp2 = 0; + + if(hi2s->State == HAL_I2S_STATE_READY) + { + if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + hi2s->pTxBuffPtr = pTxData; + hi2s->pRxBuffPtr = pRxData; + + tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended + is selected during the I2S configuration phase, the Size parameter means the number + of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data + frame is selected the Size parameter means the number of 16-bit data length. */ + if((tmp1 == I2S_DATAFORMAT_24B)||\ + (tmp2 == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = Size*2; + hi2s->TxXferCount = Size*2; + hi2s->RxXferSize = Size*2; + hi2s->RxXferCount = Size*2; + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + + tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; + tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; + /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ + if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX)) + { + /* Enable I2Sext RXNE and ERR interrupts */ + I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_RXNE | I2S_IT_ERR); + + /* Enable I2Sx TXE and ERR interrupts */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2Sext(receiver) before enabling I2Sx peripheral */ + I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE; + + /* Enable I2Sx peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + } + /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ + else + { + /* Enable I2Sext TXE and ERR interrupts */ + I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_TXE |I2S_IT_ERR); + + /* Enable I2Sext RXNE and ERR interrupts */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Check if the I2S_MODE_MASTER_RX is selected */ + if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Prepare the First Data before enabling the I2S */ + if(hi2s->TxXferCount != 0) + { + /* Transmit First data */ + I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++); + hi2s->TxXferCount--; + + if(hi2s->TxXferCount == 0) + { + /* Disable I2Sext TXE interrupt */ + I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE; + } + } + } + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + + /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */ + I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE; + } + } + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Full-Duplex Transmit/Receive data in non-blocking mode using DMA + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pTxData: a 16-bit pointer to the Transmit data buffer. + * @param pRxData: a 16-bit pointer to the Receive data buffer. + * @param Size: number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 16-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size) +{ + uint32_t *tmp; + uint32_t tmp1 = 0, tmp2 = 0; + + if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) + { + return HAL_ERROR; + } + + if(hi2s->State == HAL_I2S_STATE_READY) + { + hi2s->pTxBuffPtr = pTxData; + hi2s->pRxBuffPtr = pRxData; + + tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended + is selected during the I2S configuration phase, the Size parameter means the number + of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data + frame is selected the Size parameter means the number of 16-bit data length. */ + if((tmp1 == I2S_DATAFORMAT_24B)||\ + (tmp2 == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = Size*2; + hi2s->TxXferCount = Size*2; + hi2s->RxXferSize = Size*2; + hi2s->RxXferCount = Size*2; + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + hi2s->State = HAL_I2S_STATE_BUSY_TX_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + + /* Set the I2S Rx DMA Half transfert complete callback */ + hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; + + /* Set the I2S Rx DMA transfert complete callback */ + hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; + + /* Set the I2S Rx DMA error callback */ + hi2s->hdmarx->XferErrorCallback = I2S_DMAError; + + /* Set the I2S Tx DMA Half transfert complete callback */ + hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; + + /* Set the I2S Tx DMA transfert complete callback */ + hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; + + /* Set the I2S Tx DMA error callback */ + hi2s->hdmatx->XferErrorCallback = I2S_DMAError; + + tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; + tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; + /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ + if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX)) + { + /* Enable the Rx DMA Stream */ + tmp = (uint32_t*)&pRxData; + HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, *(uint32_t*)tmp, hi2s->RxXferSize); + + /* Enable Rx DMA Request */ + I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN; + + /* Enable the Tx DMA Stream */ + tmp = (uint32_t*)&pTxData; + HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize); + + /* Enable Tx DMA Request */ + hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN; + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2Sext(receiver) before enabling I2Sx peripheral */ + I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE; + + /* Enable I2S peripheral after the I2Sext */ + __HAL_I2S_ENABLE(hi2s); + } + } + else + { + /* Enable the Tx DMA Stream */ + tmp = (uint32_t*)&pTxData; + HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, hi2s->TxXferSize); + + /* Enable Tx DMA Request */ + I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN; + + /* Enable the Rx DMA Stream */ + tmp = (uint32_t*)&pRxData; + HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize); + + /* Enable Rx DMA Request */ + hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN; + + /* Check if the I2S is already enabled */ + if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral before the I2Sext */ + __HAL_I2S_ENABLE(hi2s); + + /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */ + I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE; + } + else + { + /* Check if Master Receiver mode is selected */ + if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt + * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s) +{ + uint32_t tmp1 = 0, tmp2 = 0; + + if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX) + { + /* Process Locked */ + __HAL_LOCK(hi2s); + + tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; + tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG; + /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */ + if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX)) + { + if(hi2s->TxXferCount != 0) + { + if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE) != RESET) + { + /* Transmit data */ + hi2s->Instance->DR = (*hi2s->pTxBuffPtr++); + hi2s->TxXferCount--; + + if(hi2s->TxXferCount == 0) + { + /* Disable TXE interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_TXE); + } + } + } + + if(hi2s->RxXferCount != 0) + { + if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) == SPI_SR_RXNE) + { + /* Receive data */ + (*hi2s->pRxBuffPtr++) = I2SxEXT(hi2s->Instance)->DR; + hi2s->RxXferCount--; + + if(hi2s->RxXferCount == 0) + { + /* Disable I2Sext RXNE interrupt */ + I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_RXNE; + } + } + } + } + /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */ + else + { + if(hi2s->TxXferCount != 0) + { + if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) == SPI_SR_TXE) + { + /* Transmit data */ + I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++); + hi2s->TxXferCount--; + + if(hi2s->TxXferCount == 0) + { + /* Disable I2Sext TXE interrupt */ + I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE; + + HAL_I2S_TxCpltCallback(hi2s); + } + } + } + if(hi2s->RxXferCount != 0) + { + if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE) != RESET) + { + /* Receive data */ + (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR; + hi2s->RxXferCount--; + + if(hi2s->RxXferCount == 0) + { + /* Disable RXNE interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE); + + HAL_I2S_RxCpltCallback(hi2s); + } + } + } + } + + tmp1 = hi2s->RxXferCount; + tmp2 = hi2s->TxXferCount; + if((tmp1 == 0) && (tmp2 == 0)) + { + /* Disable I2Sx ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_ERR); + /* Disable I2Sext ERR interrupt */ + I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_ERR; + + hi2s->State = HAL_I2S_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +#endif /* HAL_I2S_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/