diff --git a/ports/cxd56/Makefile b/ports/cxd56/Makefile index 507d763312..3766d42228 100644 --- a/ports/cxd56/Makefile +++ b/ports/cxd56/Makefile @@ -62,6 +62,13 @@ SPRESENSE_SDK = spresense-exported-sdk FIRMWARE = $(SPRESENSE_SDK)/firmware +BOOTLOADER_FILES += \ + $(FIRMWARE)/AESM.espk \ + $(FIRMWARE)/dnnrt-mp.espk \ + $(FIRMWARE)/gnssfw.espk \ + $(FIRMWARE)/loader.espk \ + $(FIRMWARE)/sysutil.spk \ + # Platforms are: Linux, Darwin, MSYS, CYGWIN PLATFORM := $(firstword $(subst _, ,$(shell uname -s 2>/dev/null))) @@ -91,8 +98,7 @@ INC += \ -I$(SPRESENSE_SDK)/nuttx/arch \ -I$(SPRESENSE_SDK)/nuttx/arch/chip \ -I$(SPRESENSE_SDK)/nuttx/arch/os \ - -I$(SPRESENSE_SDK)/sdk/bsp/include \ - -I$(SPRESENSE_SDK)/sdk/bsp/include/sdk \ + -I$(SPRESENSE_SDK)/sdk/include \ CFLAGS += \ $(INC) \ @@ -125,7 +131,7 @@ LDFLAGS = \ --entry=__start \ -nostartfiles \ -nodefaultlibs \ - -T$(SPRESENSE_SDK)/nuttx/build/ramconfig.ld \ + -T$(SPRESENSE_SDK)/nuttx/scripts/ramconfig.ld \ --gc-sections \ -Map=$(BUILD)/output.map \ -o $(BUILD)/firmware.elf \ @@ -133,8 +139,8 @@ LDFLAGS = \ -u spresense_main \ -u board_timerhook \ $(BUILD)/libmpy.a \ - $(SPRESENSE_SDK)/sdk/libs/libapps.a \ - $(SPRESENSE_SDK)/sdk/libs/libsdk.a \ + $(SPRESENSE_SDK)/nuttx/libs/libapps.a \ + $(SPRESENSE_SDK)/nuttx/libs/libnuttx.a \ $(LIBM) \ $(LIBGCC) \ --end-group \ @@ -213,11 +219,11 @@ $(BUILD)/firmware.spk: $(BUILD)/firmware.elf $(MKSPK) flash: $(BUILD)/firmware.spk $(ECHO) "Writing $< to the board" - $(SPRESENSE_SDK)/sdk/tools/flash.sh -c $(SERIAL) $(BUILD)/firmware.spk + tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $(BUILD)/firmware.spk flash-bootloader: $(SPRESENSE_SDK) $(FIRMWARE) $(ECHO) "Writing loader to the board" - $(SPRESENSE_SDK)/sdk/tools/flash.sh -l $(FIRMWARE) -c $(SERIAL) + tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $(BOOTLOADER_FILES) include $(TOP)/py/mkrules.mk diff --git a/ports/cxd56/README.md b/ports/cxd56/README.md index ec284e7421..7fa439aacb 100644 --- a/ports/cxd56/README.md +++ b/ports/cxd56/README.md @@ -16,7 +16,7 @@ Board features: * Spresense is powered by Sony's CXD5602 microcontroller (ARM® Cortex®-M4F × 6 cores), with a clock speed of 156 MHz. -Currently, Spresense port does not support GNSS, Audio and Multicore. +Currently, Spresense port does not support Audio and Multicore. Refer to [developer.sony.com/develop/spresense/](https://developer.sony.com/develop/spresense/) for further information about this board. @@ -75,7 +75,7 @@ Bootloader information: * You have to accept the End User License Agreement to be able to download and use the Spresense bootloader binary. -Download the spresense binaries zip archive from: [Spresense firmware v1-4-000](https://developer.sony.com/file/download/download-spresense-firmware-v1-4-000) +Download the spresense binaries zip archive from: [Spresense firmware v2-0-000](https://developer.sony.com/file/download/download-spresense-firmware-v2-0-000) Extract spresense binaries in your PC to ports/spresense/spresense-exported-sdk/firmware/ diff --git a/ports/cxd56/common-hal/pulseio/PWMOut.h b/ports/cxd56/common-hal/pulseio/PWMOut.h index 57fc4181f0..694acc4e0c 100644 --- a/ports/cxd56/common-hal/pulseio/PWMOut.h +++ b/ports/cxd56/common-hal/pulseio/PWMOut.h @@ -27,7 +27,7 @@ #ifndef MICROPY_INCLUDED_CXD56_COMMON_HAL_PULSEIO_PWMOUT_H #define MICROPY_INCLUDED_CXD56_COMMON_HAL_PULSEIO_PWMOUT_H -#include +#include #include "common-hal/microcontroller/Pin.h" diff --git a/ports/cxd56/configs/circuitpython/defconfig b/ports/cxd56/configs/circuitpython/defconfig new file mode 100644 index 0000000000..268f7a68e9 --- /dev/null +++ b/ports/cxd56/configs/circuitpython/defconfig @@ -0,0 +1,171 @@ +# +# This file is autogenerated: PLEASE DO NOT EDIT IT. +# +# You can use "make menuconfig" to make any modifications to the installed .config file. +# You can then do "make savedefconfig" to generate a new defconfig file that includes your +# modifications. +# +# CONFIG_ARCH_LEDS is not set +# CONFIG_CXD56_I2C0_SCUSEQ is not set +# CONFIG_CXD56_SFC is not set +# CONFIG_CXD56_SPI3_SCUSEQ is not set +# CONFIG_MMCSD_MMCSUPPORT is not set +# CONFIG_MMCSD_SPI is not set +# CONFIG_MTD_SMART_WEAR_LEVEL is not set +# CONFIG_NET_IPv4 is not set +# CONFIG_NXFONTS_PACKEDMSFIRST is not set +# CONFIG_STANDARD_SERIAL is not set +CONFIG_ARCH="arm" +CONFIG_ARCH_BOARD="spresense" +CONFIG_ARCH_BOARD_SPRESENSE=y +CONFIG_ARCH_CHIP="cxd56xx" +CONFIG_ARCH_CHIP_CXD56XX=y +CONFIG_ARCH_INTERRUPTSTACK=2048 +CONFIG_ARCH_MATH_H=y +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARMV7M_USEBASEPRI=y +CONFIG_ASMP=y +CONFIG_AUDIO=y +CONFIG_AUDIOUTILS_DSP_MOUNTPT="/mnt/sd0/BIN" +CONFIG_AUDIOUTILS_MANAGER=y +CONFIG_AUDIOUTILS_PLAYER=y +CONFIG_AUDIOUTILS_PLAYLIST=y +CONFIG_AUDIOUTILS_RECORDER=y +CONFIG_BOARDCTL_IOCTL=y +CONFIG_BOARDCTL_POWEROFF=y +CONFIG_BOARDCTL_RESET=y +CONFIG_BOARDCTL_UNIQUEID=y +CONFIG_BOARDCTL_UNIQUEID_SIZE=5 +CONFIG_BOARDCTL_USBDEVCTRL=y +CONFIG_BOARD_CRASHDUMP=y +CONFIG_BOARD_LATE_INITIALIZE=y +CONFIG_BOARD_LOOPSPERMSEC=5434 +CONFIG_BOOT_RUNFROMISRAM=y +CONFIG_BUILTIN=y +CONFIG_CLOCK_MONOTONIC=y +CONFIG_CXD56_ADC=y +CONFIG_CXD56_AUDIO=y +CONFIG_CXD56_BINARY=y +CONFIG_CXD56_CHARGER=y +CONFIG_CXD56_CISIF=y +CONFIG_CXD56_GAUGE=y +CONFIG_CXD56_GNSS=y +CONFIG_CXD56_HPADC0=y +CONFIG_CXD56_HPADC1=y +CONFIG_CXD56_I2C0=y +CONFIG_CXD56_I2C2=y +CONFIG_CXD56_I2C=y +CONFIG_CXD56_I2C_DRIVER=y +CONFIG_CXD56_IMAGEPROC=y +CONFIG_CXD56_LPADC=y +CONFIG_CXD56_PWM0=y +CONFIG_CXD56_PWM1=y +CONFIG_CXD56_PWM2=y +CONFIG_CXD56_PWM3=y +CONFIG_CXD56_PWM=y +CONFIG_CXD56_SDIO=y +CONFIG_CXD56_SPI3=y +CONFIG_CXD56_SPI5=y +CONFIG_CXD56_SPI=y +CONFIG_CXD56_UART2=y +CONFIG_DEBUG_FULLOPT=y +CONFIG_DEBUG_SYMBOLS=y +CONFIG_DNN_RT=y +CONFIG_DNN_RT_MP=y +CONFIG_DRIVERS_VIDEO=y +CONFIG_EXTERNALS_CMSIS=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_MAXFNAME=64 +CONFIG_FS_FAT=y +CONFIG_FS_PROCFS=y +CONFIG_FS_PROCFS_REGISTER=y +CONFIG_FS_ROMFS=y +CONFIG_FS_SMARTFS=y +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_LCD=y +CONFIG_LCD_NOGETRUN=y +CONFIG_LIBC_FLOATINGPOINT=y +CONFIG_LIBC_IPv4_ADDRCONV=y +CONFIG_LIBC_IPv6_ADDRCONV=y +CONFIG_LIB_KBDCODEC=y +CONFIG_MAX_WDOGPARMS=2 +CONFIG_MEMUTILS=y +CONFIG_MMCSD=y +CONFIG_MMCSD_SDIO=y +CONFIG_MTD=y +CONFIG_MTD_BYTE_WRITE=y +CONFIG_MTD_SMART=y +CONFIG_MTD_SMART_ENABLE_CRC=y +CONFIG_MTD_SMART_FSCK=y +CONFIG_MTD_SMART_SECTOR_SIZE=4096 +CONFIG_NAME_MAX=64 +CONFIG_NET=y +CONFIG_NETDEVICES=y +CONFIG_NETDEV_LATEINIT=y +CONFIG_NET_SOCKOPTS=y +CONFIG_NET_TCP_NO_STACK=y +CONFIG_NET_UDP_NO_STACK=y +CONFIG_NET_USRSOCK=y +CONFIG_NET_USRSOCK_TCP=y +CONFIG_NET_USRSOCK_UDP=y +CONFIG_NFILE_STREAMS=8 +CONFIG_NSH_ARCHINIT=y +CONFIG_NSH_BUILTIN_APPS=y +CONFIG_NSH_DISABLE_LOSMART=y +CONFIG_NSH_LINELEN=160 +CONFIG_NSH_MAXARGUMENTS=14 +CONFIG_NSH_READLINE=y +CONFIG_PIPES=y +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_PREALLOC_TIMERS=4 +CONFIG_PREALLOC_WDOGS=16 +CONFIG_PWM=y +CONFIG_RAM_SIZE=1572864 +CONFIG_RAM_START=0x0d000000 +CONFIG_READLINE_CMD_HISTORY=y +CONFIG_READLINE_CMD_HISTORY_LINELEN=160 +CONFIG_READLINE_TABCOMPLETION=y +CONFIG_RR_INTERVAL=200 +CONFIG_RTC=y +CONFIG_RTC_ALARM=y +CONFIG_RTC_DRIVER=y +CONFIG_RTC_FREQUENCY=32768 +CONFIG_RTC_HIRES=y +CONFIG_SCHED_CHILD_STATUS=y +CONFIG_SCHED_HAVE_PARENT=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_LPNTHREADS=3 +CONFIG_SCHED_LPWORK=y +CONFIG_SCHED_WAITPID=y +CONFIG_SDCLONE_DISABLE=y +CONFIG_SDIO_MUXBUS=y +CONFIG_SDK_AUDIO=y +CONFIG_SERIAL_TERMIOS=y +CONFIG_SMARTFS_ALIGNED_ACCESS=y +CONFIG_SMARTFS_MAXNAMLEN=30 +CONFIG_SMARTFS_MULTI_ROOT_DIRS=y +CONFIG_SPECIFIC_DRIVERS=y +CONFIG_SPI=y +CONFIG_SPRESENSE_EXTENSION=y +CONFIG_START_DAY=6 +CONFIG_START_MONTH=12 +CONFIG_START_YEAR=2011 +CONFIG_SYSTEMTICK_HOOK=y +CONFIG_SYSTEM_CLE=y +CONFIG_SYSTEM_NSH=y +CONFIG_SYSTEM_NSH_CXXINITIALIZE=y +CONFIG_UART1_RXBUFSIZE=1024 +CONFIG_UART1_SERIAL_CONSOLE=y +CONFIG_UART1_TXBUFSIZE=1024 +CONFIG_UART2_IFLOWCONTROL=y +CONFIG_UART2_OFLOWCONTROL=y +CONFIG_USBDEV=y +CONFIG_USBDEV_DMA=y +CONFIG_USBDEV_DUALSPEED=y +CONFIG_USEC_PER_TICK=1000 +CONFIG_USERMAIN_STACKSIZE=1064960 +CONFIG_USER_ENTRYPOINT="spresense_main" +CONFIG_VIDEO_ISX012=y +CONFIG_VIDEO_STREAM=y diff --git a/ports/cxd56/spresense-exported-sdk b/ports/cxd56/spresense-exported-sdk index 7f6568c7f4..c991d439fa 160000 --- a/ports/cxd56/spresense-exported-sdk +++ b/ports/cxd56/spresense-exported-sdk @@ -1 +1 @@ -Subproject commit 7f6568c7f4898cdb24a2f06040784a836050686e +Subproject commit c991d439fac9c23cfcac0da16fe8055f818d40a4 diff --git a/ports/cxd56/tools/flash_writer.py b/ports/cxd56/tools/flash_writer.py new file mode 100755 index 0000000000..840f10c32f --- /dev/null +++ b/ports/cxd56/tools/flash_writer.py @@ -0,0 +1,580 @@ +#! /usr/bin/env python3 + +# Copyright (C) 2018 Sony Semiconductor Solutions Corp. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +import time +import sys +import os +import struct +import glob +import fnmatch +import errno +import telnetlib +import argparse +import shutil +import subprocess +import re +import xmodem + +import_serial_module = True + +# When SDK release, plase set SDK_RELEASE as True. +SDK_RELEASE = False + +if SDK_RELEASE : + PRINT_RAW_COMMAND = False + REBOOT_AT_END = True +else : + PRINT_RAW_COMMAND = True + REBOOT_AT_END = True + +try: + import serial +except: + import_serial_module = False + +# supported environment various +# CXD56_PORT +# CXD56_TELNETSRV_PORT +# CXD56_TELNETSRV_IP + +PROTOCOL_SERIAL = 0 +PROTOCOL_TELNET = 1 + +MAX_DOT_COUNT = 70 + +# configure parameters and default value +class ConfigArgs: + PROTOCOL_TYPE = None + SERIAL_PORT = "COM1" + SERVER_PORT = 4569 + SERVER_IP = "localhost" + EOL = bytes([10]) + WAIT_RESET = True + AUTO_RESET = False + DTR_RESET = False + XMODEM_BAUD = 0 + NO_SET_BOOTABLE = False + PACKAGE_NAME = [] + FILE_NAME = [] + ERASE_NAME = [] + PKGSYS_NAME = [] + PKGAPP_NAME = [] + PKGUPD_NAME = [] + +ROM_MSG = [b"Welcome to nash"] +XMDM_MSG = "Waiting for XMODEM (CRC or 1K) transfer. Ctrl-X to cancel." + +class ConfigArgsLoader(): + def __init__(self): + self.parser = argparse.ArgumentParser(formatter_class=argparse.RawTextHelpFormatter) + self.parser.add_argument("package_name", help="the name of the package to install", nargs='*') + self.parser.add_argument("-f", "--file", dest="file_name", help="save file", action='append') + self.parser.add_argument("-e", "--erase", dest="erase_name", help="erase file", action='append') + + self.parser.add_argument("-S", "--sys", dest="pkgsys_name", help="the name of the system package to install", action='append') + self.parser.add_argument("-A", "--app", dest="pkgapp_name", help="the name of the application package to install", action='append') + self.parser.add_argument("-U", "--upd", dest="pkgupd_name", help="the name of the updater package to install", action='append') + + self.parser.add_argument("-a", "--auto-reset", dest="auto_reset", + action="store_true", default=None, + help="try to auto reset develop board if possible") + self.parser.add_argument("-d", "--dtr-reset", dest="dtr_reset", + action="store_true", default=None, + help="try to auto reset develop board if possible") + self.parser.add_argument("-n", "--no-set-bootable", dest="no_set_bootable", + action="store_true", default=None, + help="not to set bootable") + + group = self.parser.add_argument_group() + group.add_argument("-i", "--server-ip", dest="server_ip", + help="the ip address connected to the telnet server") + group.add_argument("-p", "--server-port", dest="server_port", type=int, + help="the port connected to the telnet server") + + group = self.parser.add_argument_group() + group.add_argument("-c", "--serial-port", dest="serial_port", help="the serial port") + group.add_argument("-b", "--xmodem-baudrate", dest="xmodem_baud", help="Use the faster baudrate in xmodem") + + mutually_group = self.parser.add_mutually_exclusive_group() + mutually_group.add_argument("-t", "--telnet-protocol", dest="telnet_protocol", + action="store_true", default=None, + help="use the telnet protocol for binary transmission") + mutually_group.add_argument("-s", "--serial-protocol", dest="serial_protocol", + action="store_true", default=None, + help="use the serial port for binary transmission, default options") + + mutually_group2 = self.parser.add_mutually_exclusive_group() + mutually_group2.add_argument("-F", "--force-wait-reset", dest="wait_reset", + action="store_true", default=None, + help="force wait for pressing RESET button") + mutually_group2.add_argument("-N", "--no-wait-reset", dest="wait_reset", + action="store_false", default=None, + help="if possible, skip to wait for pressing RESET button") + + def update_config(self): + args = self.parser.parse_args() + + ConfigArgs.PACKAGE_NAME = args.package_name + ConfigArgs.FILE_NAME = args.file_name + ConfigArgs.ERASE_NAME = args.erase_name + ConfigArgs.PKGSYS_NAME = args.pkgsys_name + ConfigArgs.PKGAPP_NAME = args.pkgapp_name + ConfigArgs.PKGUPD_NAME = args.pkgupd_name + + # Get serial port or telnet server ip etc + if args.serial_protocol == True: + ConfigArgs.PROTOCOL_TYPE = PROTOCOL_SERIAL + elif args.telnet_protocol == True: + ConfigArgs.PROTOCOL_TYPE = PROTOCOL_TELNET + + if ConfigArgs.PROTOCOL_TYPE == None: + proto = os.environ.get("CXD56_PROTOCOL") + if proto is not None: + if 's' in proto: + ConfigArgs.PROTOCOL_TYPE = PROTOCOL_SERIAL + elif 't' in proto: + ConfigArgs.PROTOCOL_TYPE = PROTOCOL_TELNET + + if ConfigArgs.PROTOCOL_TYPE == None: + ConfigArgs.PROTOCOL_TYPE = PROTOCOL_SERIAL + + if ConfigArgs.PROTOCOL_TYPE == PROTOCOL_SERIAL: + if args.serial_port is not None: + ConfigArgs.SERIAL_PORT = args.serial_port + else: + # Get serial port from the environment + port = os.environ.get("CXD56_PORT") + if port is not None: + ConfigArgs.SERIAL_PORT = port + else: + print("CXD56_PORT is not set, Use " + ConfigArgs.SERIAL_PORT + ".") + else: + ConfigArgs.PROTOCOL_TYPE = PROTOCOL_TELNET + if args.server_port is not None: + ConfigArgs.SERVER_PORT = args.server_port + else: + port = os.environ.get("CXD56_TELNETSRV_PORT") + if port is not None: + ConfigArgs.SERVER_PORT = port + else: + print("CXD56_TELNETSRV_PORT is not set, Use " + str(ConfigArgs.SERVER_PORT) + ".") + if args.server_ip is not None: + ConfigArgs.SERVER_IP = args.server_ip + else: + ip = os.environ.get("CXD56_TELNETSRV_IP") + if ip is not None: + ConfigArgs.SERVER_IP = ip + else: + print("CXD56_TELNETSRV_IP is not set, Use " + ConfigArgs.SERVER_IP + ".") + + if args.xmodem_baud is not None: + ConfigArgs.XMODEM_BAUD = args.xmodem_baud + + if args.auto_reset is not None: + ConfigArgs.AUTO_RESET = args.auto_reset + + if args.dtr_reset is not None: + ConfigArgs.DTR_RESET = args.dtr_reset + + if args.no_set_bootable is not None: + ConfigArgs.NO_SET_BOOTABLE = args.no_set_bootable + + if args.wait_reset is not None: + ConfigArgs.WAIT_RESET = args.wait_reset + +class TelnetDev: + def __init__(self): + srv_ipaddr = ConfigArgs.SERVER_IP + srv_port = ConfigArgs.SERVER_PORT + self.recvbuf = b''; + try: + self.telnet = telnetlib.Telnet(host=srv_ipaddr, port=srv_port, timeout=10) + # There is a ack to be sent after connecting to the telnet server. + self.telnet.write(b"\xff") + except Exception as e: + print("Cannot connect to the server %s:%d" % (srv_ipaddr, srv_port)) + sys.exit(e.args[0]) + + def readline(self, size=None): + res = b'' + ch = b'' + while ch != ConfigArgs.EOL: + ch = self.getc_raw(1, timeout=0.1) + if ch == b'': + return res + res += ch + return res + + def getc_raw(self, size, timeout=1): + res = b'' + tm = time.monotonic() + while size > 0: + while self.recvbuf == b'': + self.recvbuf = self.telnet.read_eager() + if self.recvbuf == b'': + if (time.monotonic() - tm) > timeout: + return res + time.sleep(0.1) + res += self.recvbuf[0:1] + self.recvbuf = self.recvbuf[1:] + size -= 1 + return res + + def write(self, buffer): + self.telnet.write(buffer) + + def discard_inputs(self, timeout=1.0): + while True: + ch = self.getc_raw(1, timeout=timeout) + if ch == b'': + break + + def getc(self, size, timeout=1): + c = self.getc_raw(size, timeout) + return c + + def putc(self, buffer, timeout=1): + self.telnet.write(buffer) + self.show_progress(len(buffer)) + + def reboot(self): + # no-op + pass + + def set_file_size(self, filesize): + self.bytes_transfered = 0 + self.filesize = filesize + self.count = 0 + + def show_progress(self, sendsize): + if PRINT_RAW_COMMAND: + if self.count < MAX_DOT_COUNT: + self.bytes_transfered = self.bytes_transfered + sendsize + cur_count = int(self.bytes_transfered * MAX_DOT_COUNT / self.filesize) + if MAX_DOT_COUNT < cur_count: + cur_count = MAX_DOT_COUNT + for idx in range(cur_count - self.count): + print('#',end='') + sys.stdout.flush() + self.count = cur_count + if self.count == MAX_DOT_COUNT: + print("\n") + +class SerialDev: + def __init__(self): + if import_serial_module is False: + print("Cannot import serial module, maybe it's not install yet.") + print("\n", end="") + print("Please install python-setuptool by Cygwin installer.") + print("After that use easy_intall command to install serial module") + print(" $ cd tool/") + print(" $ python3 -m easy_install pyserial-2.7.tar.gz") + quit() + else: + port = ConfigArgs.SERIAL_PORT + try: + self.serial = serial.Serial(port, baudrate=115200, + parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, + bytesize=serial.EIGHTBITS, timeout=0.1) + except Exception as e: + print("Cannot open port : " + port) + sys.exit(e.args[0]) + + def readline(self, size=None): + return self.serial.readline(size) + + def write(self, buffer): + self.serial.write(buffer) + self.serial.flush() + + def discard_inputs(self, timeout=1.0): + time.sleep(timeout) + self.serial.flushInput() + + def getc(self, size, timeout=1): + self.serial.timeout = timeout + c = self.serial.read(size) + self.serial.timeout = 0.1 + return c + + def putc(self, buffer, timeout=1): + self.serial.timeout = timeout + self.serial.write(buffer) + self.serial.flush() + self.serial.timeout = 0.1 + self.show_progress(len(buffer)) + + # Note: windows platform dependent code + def putc_win(self, buffer, timeout=1): + self.serial.write(buffer) + self.show_progress(len(buffer)) + while True: + if self.serial.out_waiting == 0: + break + + def setBaudrate(self, baudrate): +# self.serial.setBaudrate(baudrate) + self.serial.baudrate = baudrate + + def reboot(self): + # Target Reset by DTR + self.serial.setDTR(False) + self.serial.setDTR(True) + self.serial.setDTR(False) + + def set_file_size(self, filesize): + self.bytes_transfered = 0 + self.filesize = filesize + self.count = 0 + + def show_progress(self, sendsize): + if PRINT_RAW_COMMAND: + if self.count < MAX_DOT_COUNT: + self.bytes_transfered = self.bytes_transfered + sendsize + cur_count = int(self.bytes_transfered * MAX_DOT_COUNT / self.filesize) + if MAX_DOT_COUNT < cur_count: + cur_count = MAX_DOT_COUNT + for idx in range(cur_count - self.count): + print('#',end='') + sys.stdout.flush() + self.count = cur_count + if self.count == MAX_DOT_COUNT: + print("\n") + +class FlashWriter: + def __init__(self, protocol_sel=PROTOCOL_SERIAL): + if protocol_sel == PROTOCOL_TELNET: + self.serial = TelnetDev() + else: + self.serial = SerialDev() + + def cancel_autoboot(self) : + boot_msg = '' + self.serial.reboot() # Target reboot before send 'r' + while boot_msg == '' : + rx = self.serial.readline().strip() + self.serial.write(b"r") # Send "r" key to avoid auto boot + for msg in ROM_MSG : + if msg in rx : + boot_msg = msg + break + while True : + rx = self.serial.readline().decode(errors="replace").strip() + if "updater" in rx : + # Workaround : Sometime first character is dropped. + # Send line feed as air shot before actual command. + self.serial.write(b"\n") # Send line feed + self.serial.discard_inputs()# Clear input buffer to sync + return boot_msg.decode(errors="ignore") + + def recv(self): + rx = self.serial.readline() + if PRINT_RAW_COMMAND : + serial_line = rx.decode(errors="replace") + if serial_line.strip() != "" and not serial_line.startswith(XMDM_MSG): + print(serial_line, end="") + return rx + + def wait(self, string): + while True: + rx = self.recv() + if string.encode() in rx: + time.sleep(0.1) + break + + def wait_for_prompt(self): + prompt_pat = re.compile(b"updater") + while True: + rx = self.recv() + if prompt_pat.search(rx): + time.sleep(0.1) + break + + def send(self, string): + self.serial.write(str(string).encode() + b"\n") + rx = self.serial.readline() + if PRINT_RAW_COMMAND : + print(rx.decode(errors="replace"), end="") + + def read_output(self, prompt_text) : + output = [] + while True : + rx = self.serial.readline() + if prompt_text.encode() in rx : + time.sleep(0.1) + break + if rx != "" : + output.append(rx.decode(errors="ignore").rstrip()) + return output + + def install_files(self, files, command) : + if ConfigArgs.XMODEM_BAUD: + command += " -b " + ConfigArgs.XMODEM_BAUD + if os.name == 'nt': + modem = xmodem.XMODEM(self.serial.getc, self.serial.putc_win, 'xmodem1k') + else: + modem = xmodem.XMODEM(self.serial.getc, self.serial.putc, 'xmodem1k') + for file in files: + with open(file, "rb") as bin : + self.send(command) + print("Install " + file) + self.wait(XMDM_MSG) + print("|0%" + + "-" * (int(MAX_DOT_COUNT / 2) - 6) + + "50%" + + "-" * (MAX_DOT_COUNT - int(MAX_DOT_COUNT / 2) - 5) + + "100%|") + if ConfigArgs.XMODEM_BAUD: + self.serial.setBaudrate(ConfigArgs.XMODEM_BAUD) + self.serial.discard_inputs() # Clear input buffer to sync + self.serial.set_file_size(os.path.getsize(file)) + modem.send(bin) + if ConfigArgs.XMODEM_BAUD: + self.serial.setBaudrate(115200) + self.wait_for_prompt() + + def save_files(self, files) : + if ConfigArgs.XMODEM_BAUD: + command = "save_file -b " + ConfigArgs.XMODEM_BAUD + " -x " + else: + command = "save_file -x " + if os.name == 'nt': + modem = xmodem.XMODEM(self.serial.getc, self.serial.putc_win, 'xmodem1k') + else: + modem = xmodem.XMODEM(self.serial.getc, self.serial.putc, 'xmodem1k') + for file in files: + with open(file, "rb") as bin : + self.send(command + os.path.basename(file)) + print("Save " + file) + self.wait(XMDM_MSG) + if ConfigArgs.XMODEM_BAUD: + self.serial.setBaudrate(ConfigArgs.XMODEM_BAUD) + self.serial.discard_inputs() # Clear input buffer to sync + self.serial.set_file_size(os.path.getsize(file)) + modem.send(bin) + if ConfigArgs.XMODEM_BAUD: + self.serial.setBaudrate(115200) + self.wait_for_prompt() + self.send("chmod d+rw " + os.path.basename(file)) + self.wait_for_prompt() + + def delete_files(self, files) : + for file in files : + self.delete_binary(file) + + def delete_binary(self, bin_name) : + self.send("rm " + bin_name) + self.wait_for_prompt() + +def main(): + try: + config_loader = ConfigArgsLoader() + config_loader.update_config() + except: + return errno.EINVAL + + # Wait to reset the board + writer = FlashWriter(ConfigArgs.PROTOCOL_TYPE) + + do_wait_reset = True + if ConfigArgs.AUTO_RESET: + if subprocess.call("cd " + sys.path[0] + "; ./reset_board.sh", shell=True) == 0: + print("auto reset board sucess!!") + do_wait_reset = False + bootrom_msg = writer.cancel_autoboot() + + if ConfigArgs.DTR_RESET: + do_wait_reset = False + bootrom_msg = writer.cancel_autoboot() + + if ConfigArgs.WAIT_RESET == False and do_wait_reset == True: + rx = writer.recv() + time.sleep(1) + for i in range(3): + writer.send("") + rx = writer.recv() + if "updater".encode() in rx: + # No need to wait for reset + do_wait_reset = False + break + time.sleep(1) + + if do_wait_reset: + # Wait to reset the board + print('Please press RESET button on target board') + sys.stdout.flush() + bootrom_msg = writer.cancel_autoboot() + + # Remove files + if ConfigArgs.ERASE_NAME : + print(">>> Remove exisiting files ...") + writer.delete_files(ConfigArgs.ERASE_NAME) + + # Install files + if ConfigArgs.PACKAGE_NAME or ConfigArgs.PKGSYS_NAME or ConfigArgs.PKGAPP_NAME or ConfigArgs.PKGUPD_NAME: + print(">>> Install files ...") + if ConfigArgs.PACKAGE_NAME : + writer.install_files(ConfigArgs.PACKAGE_NAME, "install") + if ConfigArgs.PKGSYS_NAME : + writer.install_files(ConfigArgs.PKGSYS_NAME, "install") + if ConfigArgs.PKGAPP_NAME : + writer.install_files(ConfigArgs.PKGAPP_NAME, "install") + if ConfigArgs.PKGUPD_NAME : + writer.install_files(ConfigArgs.PKGUPD_NAME, "install -k updater.key") + + # Save files + if ConfigArgs.FILE_NAME : + print(">>> Save files ...") + writer.save_files(ConfigArgs.FILE_NAME) + + # Set auto boot + if not ConfigArgs.NO_SET_BOOTABLE: + print(">>> Save Configuration to FlashROM ...") + writer.send("set bootable M0P") + writer.wait_for_prompt() + + # Sync all cached data to flash + writer.send("sync") + writer.wait_for_prompt() + + if REBOOT_AT_END : + print("Restarting the board ...") + writer.send("reboot") + + return 0 + +if __name__ == "__main__": + try: + sys.exit(main()) + except KeyboardInterrupt: + print("Canceled by keyboard interrupt.") + pass diff --git a/ports/cxd56/tools/xmodem.py b/ports/cxd56/tools/xmodem.py new file mode 100644 index 0000000000..c934300560 --- /dev/null +++ b/ports/cxd56/tools/xmodem.py @@ -0,0 +1,590 @@ +''' +=============================== + XMODEM file transfer protocol +=============================== + +.. $Id$ + +This is a literal implementation of XMODEM.TXT_, XMODEM1K.TXT_ and +XMODMCRC.TXT_, support for YMODEM and ZMODEM is pending. YMODEM should +be fairly easy to implement as it is a hack on top of the XMODEM +protocol using sequence bytes ``0x00`` for sending file names (and some +meta data). + +.. _XMODEM.TXT: doc/XMODEM.TXT +.. _XMODEM1K.TXT: doc/XMODEM1K.TXT +.. _XMODMCRC.TXT: doc/XMODMCRC.TXT + +Data flow example including error recovery +========================================== + +Here is a sample of the data flow, sending a 3-block message. +It includes the two most common line hits - a garbaged block, +and an ``ACK`` reply getting garbaged. ``CRC`` or ``CSUM`` represents +the checksum bytes. + +XMODEM 128 byte blocks +---------------------- + +:: + + SENDER RECEIVER + + <-- NAK + SOH 01 FE Data[128] CSUM --> + <-- ACK + SOH 02 FD Data[128] CSUM --> + <-- ACK + SOH 03 FC Data[128] CSUM --> + <-- ACK + SOH 04 FB Data[128] CSUM --> + <-- ACK + SOH 05 FA Data[100] CPMEOF[28] CSUM --> + <-- ACK + EOT --> + <-- ACK + +XMODEM-1k blocks, CRC mode +-------------------------- + +:: + + SENDER RECEIVER + + <-- C + STX 01 FE Data[1024] CRC CRC --> + <-- ACK + STX 02 FD Data[1024] CRC CRC --> + <-- ACK + STX 03 FC Data[1000] CPMEOF[24] CRC CRC --> + <-- ACK + EOT --> + <-- ACK + +Mixed 1024 and 128 byte Blocks +------------------------------ + +:: + + SENDER RECEIVER + + <-- C + STX 01 FE Data[1024] CRC CRC --> + <-- ACK + STX 02 FD Data[1024] CRC CRC --> + <-- ACK + SOH 03 FC Data[128] CRC CRC --> + <-- ACK + SOH 04 FB Data[100] CPMEOF[28] CRC CRC --> + <-- ACK + EOT --> + <-- ACK + +YMODEM Batch Transmission Session (1 file) +------------------------------------------ + +:: + + SENDER RECEIVER + <-- C (command:rb) + SOH 00 FF foo.c NUL[123] CRC CRC --> + <-- ACK + <-- C + SOH 01 FE Data[128] CRC CRC --> + <-- ACK + SOH 02 FC Data[128] CRC CRC --> + <-- ACK + SOH 03 FB Data[100] CPMEOF[28] CRC CRC --> + <-- ACK + EOT --> + <-- NAK + EOT --> + <-- ACK + <-- C + SOH 00 FF NUL[128] CRC CRC --> + <-- ACK + + +''' + +__author__ = 'Wijnand Modderman ' +__copyright__ = ['Copyright (c) 2010 Wijnand Modderman', + 'Copyright (c) 1981 Chuck Forsberg'] +__license__ = 'MIT' +__version__ = '0.3.2' + +import logging +import time +import sys +from functools import partial +import collections + +# Loggerr +log = logging.getLogger('xmodem') + +# Protocol bytes +SOH = bytes([0x01]) +STX = bytes([0x02]) +EOT = bytes([0x04]) +ACK = bytes([0x06]) +DLE = bytes([0x10]) +NAK = bytes([0x15]) +CAN = bytes([0x18]) +CRC = bytes([0x43]) # C + + +class XMODEM(object): + ''' + XMODEM Protocol handler, expects an object to read from and an object to + write to. + + >>> def getc(size, timeout=1): + ... return data or None + ... + >>> def putc(data, timeout=1): + ... return size or None + ... + >>> modem = XMODEM(getc, putc) + + + :param getc: Function to retreive bytes from a stream + :type getc: callable + :param putc: Function to transmit bytes to a stream + :type putc: callable + :param mode: XMODEM protocol mode + :type mode: string + :param pad: Padding character to make the packets match the packet size + :type pad: char + + ''' + + # crctab calculated by Mark G. Mendel, Network Systems Corporation + crctable = [ + 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7, + 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef, + 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6, + 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de, + 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485, + 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d, + 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4, + 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc, + 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823, + 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b, + 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12, + 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a, + 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41, + 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49, + 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70, + 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78, + 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f, + 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067, + 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e, + 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256, + 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d, + 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, + 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c, + 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634, + 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab, + 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3, + 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a, + 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92, + 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9, + 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1, + 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8, + 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0, + ] + + def __init__(self, getc, putc, mode='xmodem', pad=b'\x1a'): + self.getc = getc + self.putc = putc + self.mode = mode + self.pad = pad + + def abort(self, count=2, timeout=60): + ''' + Send an abort sequence using CAN bytes. + ''' + for counter in range(0, count): + self.putc(CAN, timeout) + + def send(self, stream, retry=32, timeout=360, quiet=0, callback=None): + ''' + Send a stream via the XMODEM protocol. + + >>> stream = file('/etc/issue', 'rb') + >>> print modem.send(stream) + True + + Returns ``True`` upon succesful transmission or ``False`` in case of + failure. + + :param stream: The stream object to send data from. + :type stream: stream (file, etc.) + :param retry: The maximum number of times to try to resend a failed + packet before failing. + :type retry: int + :param timeout: The number of seconds to wait for a response before + timing out. + :type timeout: int + :param quiet: If 0, it prints info to stderr. If 1, it does not print any info. + :type quiet: int + :param callback: Reference to a callback function that has the + following signature. This is useful for + getting status updates while a xmodem + transfer is underway. + Expected callback signature: + def callback(total_packets, success_count, error_count) + :type callback: callable + ''' + + # initialize protocol + try: + packet_size = dict( + xmodem = 128, + xmodem1k = 1024, + )[self.mode] + except AttributeError: + raise ValueError("An invalid mode was supplied") + + error_count = 0 + crc_mode = 0 + cancel = 0 + while True: + char = self.getc(1) + if char: + if char == NAK: + crc_mode = 0 + break + elif char == CRC: + crc_mode = 1 + break + elif char == CAN: + if not quiet: + print('received CAN', file=sys.stderr) + if cancel: + return False + else: + cancel = 1 + else: + log.error('send ERROR expected NAK/CRC, got %s' % \ + (ord(char),)) + + error_count += 1 + if error_count >= retry: + self.abort(timeout=timeout) + return False + + # send data + error_count = 0 + success_count = 0 + total_packets = 0 + sequence = 1 + while True: + data = stream.read(packet_size) + if not data: + log.info('sending EOT') + # end of stream + break + total_packets += 1 + data = data.ljust(packet_size, self.pad) + if crc_mode: + crc = self.calc_crc(data) + else: + crc = self.calc_checksum(data) + + # emit packet + while True: + if packet_size == 128: + self.putc(SOH) + else: # packet_size == 1024 + self.putc(STX) + self.putc(bytes([sequence])) + self.putc(bytes([0xff - sequence])) + self.putc(data) + if crc_mode: + self.putc(bytes([crc >> 8])) + self.putc(bytes([crc & 0xff])) + else: + self.putc(bytes([crc])) + + char = self.getc(1, timeout) + if char == ACK: + success_count += 1 + if isinstance(callback, collections.Callable): + callback(total_packets, success_count, error_count) + break + if char == NAK: + error_count += 1 + if isinstance(callback, collections.Callable): + callback(total_packets, success_count, error_count) + if error_count >= retry: + # excessive amounts of retransmissions requested, + # abort transfer + self.abort(timeout=timeout) + log.warning('excessive NAKs, transfer aborted') + return False + + # return to loop and resend + continue + else: + log.error('Not ACK, Not NAK') + error_count += 1 + if isinstance(callback, collections.Callable): + callback(total_packets, success_count, error_count) + if error_count >= retry: + # excessive amounts of retransmissions requested, + # abort transfer + self.abort(timeout=timeout) + log.warning('excessive protocol errors, transfer aborted') + return False + + # return to loop and resend + continue + + # protocol error + self.abort(timeout=timeout) + log.error('protocol error') + return False + + # keep track of sequence + sequence = (sequence + 1) % 0x100 + + while True: + # end of transmission + self.putc(EOT) + + #An ACK should be returned + char = self.getc(1, timeout) + if char == ACK: + break + else: + error_count += 1 + if error_count >= retry: + self.abort(timeout=timeout) + log.warning('EOT was not ACKd, transfer aborted') + return False + + return True + + def recv(self, stream, crc_mode=1, retry=16, timeout=60, delay=1, quiet=0): + ''' + Receive a stream via the XMODEM protocol. + + >>> stream = file('/etc/issue', 'wb') + >>> print modem.recv(stream) + 2342 + + Returns the number of bytes received on success or ``None`` in case of + failure. + ''' + + # initiate protocol + error_count = 0 + char = 0 + cancel = 0 + while True: + # first try CRC mode, if this fails, + # fall back to checksum mode + if error_count >= retry: + self.abort(timeout=timeout) + return None + elif crc_mode and error_count < (retry / 2): + if not self.putc(CRC): + time.sleep(delay) + error_count += 1 + else: + crc_mode = 0 + if not self.putc(NAK): + time.sleep(delay) + error_count += 1 + + char = self.getc(1, timeout) + if not char: + error_count += 1 + continue + elif char == SOH: + #crc_mode = 0 + break + elif char == STX: + break + elif char == CAN: + if cancel: + return None + else: + cancel = 1 + else: + error_count += 1 + + # read data + error_count = 0 + income_size = 0 + packet_size = 128 + sequence = 1 + cancel = 0 + while True: + while True: + if char == SOH: + packet_size = 128 + break + elif char == STX: + packet_size = 1024 + break + elif char == EOT: + # We received an EOT, so send an ACK and return the received + # data length + self.putc(ACK) + return income_size + elif char == CAN: + # cancel at two consecutive cancels + if cancel: + return None + else: + cancel = 1 + else: + if not quiet: + print('recv ERROR expected SOH/EOT, got', ord(char), file=sys.stderr) + error_count += 1 + if error_count >= retry: + self.abort() + return None + # read sequence + error_count = 0 + cancel = 0 + seq1 = ord(self.getc(1)) + seq2 = 0xff - ord(self.getc(1)) + if seq1 == sequence and seq2 == sequence: + # sequence is ok, read packet + # packet_size + checksum + data = self.getc(packet_size + 1 + crc_mode, timeout) + if crc_mode: + csum = (ord(data[-2]) << 8) + ord(data[-1]) + data = data[:-2] + log.debug('CRC (%04x <> %04x)' % \ + (csum, self.calc_crc(data))) + valid = csum == self.calc_crc(data) + else: + csum = data[-1] + data = data[:-1] + log.debug('checksum (checksum(%02x <> %02x)' % \ + (ord(csum), self.calc_checksum(data))) + valid = ord(csum) == self.calc_checksum(data) + + # valid data, append chunk + if valid: + income_size += len(data) + stream.write(data) + self.putc(ACK) + sequence = (sequence + 1) % 0x100 + char = self.getc(1, timeout) + continue + else: + # consume data + self.getc(packet_size + 1 + crc_mode) + self.debug('expecting sequence %d, got %d/%d' % \ + (sequence, seq1, seq2)) + + # something went wrong, request retransmission + self.putc(NAK) + + def calc_checksum(self, data, checksum=0): + ''' + Calculate the checksum for a given block of data, can also be used to + update a checksum. + + >>> csum = modem.calc_checksum('hello') + >>> csum = modem.calc_checksum('world', csum) + >>> hex(csum) + '0x3c' + + ''' + return (sum(map(ord, data)) + checksum) % 256 + + def calc_crc(self, data, crc=0): + ''' + Calculate the Cyclic Redundancy Check for a given block of data, can + also be used to update a CRC. + + >>> crc = modem.calc_crc('hello') + >>> crc = modem.calc_crc('world', crc) + >>> hex(crc) + '0xd5e3' + + ''' + for char in data: + crc = (crc << 8) ^ self.crctable[((crc >> 8) ^ int(char)) & 0xff] + return crc & 0xffff + + +XMODEM1k = partial(XMODEM, mode='xmodem1k') + + +def run(): + import optparse + import subprocess + + parser = optparse.OptionParser(usage='%prog [] filename filename') + parser.add_option('-m', '--mode', default='xmodem', + help='XMODEM mode (xmodem, xmodem1k)') + + options, args = parser.parse_args() + if len(args) != 3: + parser.error('invalid arguments') + return 1 + + elif args[0] not in ('send', 'recv'): + parser.error('invalid mode') + return 1 + + def _func(so, si): + import select + import subprocess + + print('si', si) + print('so', so) + + def getc(size, timeout=3): + w,t,f = select.select([so], [], [], timeout) + if w: + data = so.read(size) + else: + data = None + + print('getc(', repr(data), ')') + return data + + def putc(data, timeout=3): + w,t,f = select.select([], [si], [], timeout) + if t: + si.write(data) + si.flush() + size = len(data) + else: + size = None + + print('putc(', repr(data), repr(size), ')') + return size + + return getc, putc + + def _pipe(*command): + pipe = subprocess.Popen(command, + stdout=subprocess.PIPE, stdin=subprocess.PIPE) + return pipe.stdout, pipe.stdin + + if args[0] == 'recv': + import io + getc, putc = _func(*_pipe('sz', '--xmodem', args[2])) + stream = open(args[1], 'wb') + xmodem = XMODEM(getc, putc, mode=options.mode) + status = xmodem.recv(stream, retry=8) + stream.close() + + elif args[0] == 'send': + getc, putc = _func(*_pipe('rz', '--xmodem', args[2])) + stream = open(args[1], 'rb') + xmodem = XMODEM(getc, putc, mode=options.mode) + status = xmodem.send(stream, retry=8) + stream.close() + +if __name__ == '__main__': + sys.exit(run())