display is functional now
This commit is contained in:
parent
0dfafe2a4b
commit
96ae87e559
|
@ -25,5 +25,106 @@
|
|||
*/
|
||||
|
||||
#include "supervisor/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
#include "shared-bindings/busio/SPI.h"
|
||||
#include "shared-bindings/displayio/FourWire.h"
|
||||
#include "shared-bindings/microcontroller/Pin.h"
|
||||
#include "shared-module/displayio/__init__.h"
|
||||
#include "shared-module/displayio/mipi_constants.h"
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
displayio_fourwire_obj_t board_display_obj;
|
||||
|
||||
#define DELAY 0x80
|
||||
|
||||
// display init sequence according to LilyGO example app
|
||||
uint8_t display_init_sequence[] = {
|
||||
// sw reset
|
||||
0x01, 0 | DELAY, 0x96,
|
||||
// sleep out
|
||||
0x11, 0 | DELAY, 0xff,
|
||||
// normal display mode on
|
||||
// 0x13, 0,
|
||||
// display and color format settings
|
||||
// 0x36, 1, 0x68,
|
||||
// 0xB6, 2, 0x0A, 0x82,
|
||||
0x3A, 1 | DELAY, 0x55, 0x0a,
|
||||
0x36, 0x01, 0x08, // _MADCTL
|
||||
0x21, 0x80, 0x0A, // _INVON Hack and Delay 10ms
|
||||
0x13, 0x80, 0x0A, // _NORON and Delay 10ms
|
||||
0x36, 0x01, 0xC0, // _MADCTL
|
||||
// ST7789V frame rate setting
|
||||
// 0xB2, 5, 0x0C, 0x0C, 0x00, 0x33, 0x33,
|
||||
// voltages: VGH / VGL
|
||||
// 0xB7, 1, 0x35,
|
||||
// ST7789V power setting
|
||||
// 0xBB, 1, 0x28,
|
||||
// 0xC0, 1, 0x0C,
|
||||
// 0xC2, 2, 0x01, 0xFF,
|
||||
// 0xC3, 1, 0x10,
|
||||
// 0xC4, 1, 0x20,
|
||||
// 0xC6, 1, 0x0F,
|
||||
// 0xD0, 2, 0xA4, 0xA1,
|
||||
// ST7789V gamma setting
|
||||
// 0xE0, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x32, 0x44, 0x42, 0x06, 0x0E, 0x12, 0x14, 0x17,
|
||||
// 0xE1, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x31, 0x54, 0x47, 0x0E, 0x1C, 0x17, 0x1B, 0x1E,
|
||||
// 0x21, 0,
|
||||
// display on
|
||||
0x29, 0 | DELAY, 0xff
|
||||
};
|
||||
|
||||
|
||||
void board_init(void) {
|
||||
displayio_fourwire_obj_t *bus = &allocate_display_bus()->fourwire_bus;
|
||||
// busio_spi_obj_t *spi = common_hal_board_create_spi(0);
|
||||
busio_spi_obj_t *spi = &bus->inline_bus;
|
||||
common_hal_busio_spi_construct(spi, &pin_GPIO17, &pin_GPIO21, NULL, false);
|
||||
common_hal_busio_spi_never_reset(spi);
|
||||
bus->base.type = &displayio_fourwire_type;
|
||||
|
||||
common_hal_displayio_fourwire_construct(
|
||||
bus,
|
||||
spi,
|
||||
&pin_GPIO33, // DC
|
||||
&pin_GPIO15, // CS
|
||||
&pin_GPIO34, // RST
|
||||
40000000, // baudrate
|
||||
0, // polarity
|
||||
0 // phase
|
||||
);
|
||||
displayio_display_obj_t *display = &allocate_display()->display;
|
||||
display->base.type = &displayio_display_type;
|
||||
|
||||
common_hal_displayio_display_construct(
|
||||
display,
|
||||
bus,
|
||||
128, // width (after rotation)
|
||||
128, // height (after rotation)
|
||||
2, // column start
|
||||
1, // row start
|
||||
0, // rotation
|
||||
16, // color depth
|
||||
false, // grayscale
|
||||
false, // pixels in a byte share a row. Only valid for depths < 8
|
||||
1, // bytes per cell. Only valid for depths < 8
|
||||
false, // reverse_pixels_in_byte. Only valid for depths < 8
|
||||
true, // reverse_pixels_in_word
|
||||
MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
|
||||
MIPI_COMMAND_SET_PAGE_ADDRESS, // set row command
|
||||
MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
|
||||
display_init_sequence,
|
||||
sizeof(display_init_sequence),
|
||||
&pin_GPIO16, // backlight pin
|
||||
NO_BRIGHTNESS_COMMAND,
|
||||
1.0f, // brightness
|
||||
false, // single_byte_bounds
|
||||
false, // data_as_commands
|
||||
true, // auto_refresh
|
||||
60, // native_frames_per_second
|
||||
true, // backlight_on_high
|
||||
false, // SH1107_addressing
|
||||
50000 // backlight pwm frequency
|
||||
);
|
||||
}
|
||||
|
||||
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
|
||||
|
|
|
@ -34,3 +34,6 @@
|
|||
#define CIRCUITPY_BOARD_I2C (2)
|
||||
#define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO39, .sda = &pin_GPIO38}, \
|
||||
{.scl = &pin_GPIO1, .sda = &pin_GPIO2}}
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO17)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO21)
|
||||
|
|
|
@ -27,7 +27,9 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
|||
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_GPIO39) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_IMU_SCL), MP_ROM_PTR(&pin_GPIO39) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_GPIO38) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_IMU_SDA), MP_ROM_PTR(&pin_GPIO38) },
|
||||
|
||||
// lcd spi bus
|
||||
{ MP_ROM_QSTR(MP_QSTR_LCD_MOSI), MP_ROM_PTR(&pin_GPIO21) },
|
||||
|
@ -43,6 +45,7 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
|||
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_PORTA_I2C), MP_ROM_PTR(&board_porta_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)}
|
||||
};
|
||||
|
|
Loading…
Reference in New Issue