add defs for pyportal titano

2019-08-07 17:10:31 -04:00 · 2019-08-07 17:10:31 -04:00 · 8f6eac98f3
commit 8f6eac98f3
parent 47a0b7cba1
5 changed files with 251 additions and 1 deletions
--- a/.travis.yml
+++ b/.travis.yml
@ -25,7 +25,7 @@ env:
  - TRAVIS_BOARDS="metro_m0_express metro_m4_express metro_m4_airlift_lite pirkey_m0 trellis_m4_express trinket_m0 sparkfun_lumidrive sparkfun_redboard_turbo bast_pro_mini_m0 datum_distance pyruler" TRAVIS_SDK=arm
  - TRAVIS_BOARDS="cp32-m4 feather_radiofruit_zigbee gemma_m0 hallowing_m0_express itsybitsy_m0_express itsybitsy_m4_express meowmeow sam32 uchip escornabot_makech pygamer_advance datum_imu snekboard" TRAVIS_SDK=arm
  - TRAVIS_BOARDS="feather_m0_supersized feather_m0_express_crickit feather_m0_rfm69 feather_m0_rfm9x feather_m4_express arduino_zero arduino_mkr1300 arduino_mkrzero pewpew10 kicksat-sprite ugame10 robohatmm1_m0 robohatmm1_m4 datum_light" TRAVIS_SDK=arm
-  - TRAVIS_BOARDS="datalore_ip_m4 circuitplayground_express_crickit feather_m0_adalogger feather_m0_basic feather_m0_express catwan_usbstick pyportal sparkfun_samd21_mini sparkfun_samd21_dev pybadge pybadge_airlift datum_weather" TRAVIS_SDK=arm
+  - TRAVIS_BOARDS="datalore_ip_m4 circuitplayground_express_crickit feather_m0_adalogger feather_m0_basic feather_m0_express catwan_usbstick pyportal sparkfun_samd21_mini sparkfun_samd21_dev pybadge pybadge_airlift datum_weather pyportal_titano" TRAVIS_SDK=arm

 addons:
  artifacts:
--- a/ports/atmel-samd/boards/pyportal_titano/board.c
+++ b/ports/atmel-samd/boards/pyportal_titano/board.c
@ -0,0 +1,109 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "boards/board.h"
+#include "mpconfigboard.h"
+#include "hal/include/hal_gpio.h"
+
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+
+#include "tick.h"
+
+#define DELAY 0x80
+
+uint8_t display_init_sequence[] = {
+    0xEF, 3, 0x03, 0x80, 0x02,
+    0xCF, 3, 0x00, 0xC1, 0x30,
+    0xED, 4, 0x64, 0x03, 0x12, 0x81,
+    0xE8, 3, 0x85, 0x00, 0x78,
+    0xCB, 5, 0x39, 0x2C, 0x00, 0x34, 0x02,
+    0xF7, 1, 0x20,
+    0xEA, 2, 0x00, 0x00,
+    0xc0, 1, 0x23,             // Power control VRH[5:0]
+    0xc1, 1, 0x10,             // Power control SAP[2:0];BT[3:0]
+    0xc5, 2, 0x3e, 0x28,       // VCM control
+    0xc7, 1, 0x86,             // VCM control2
+    0x36, 1, 0xa8,             // Memory Access Control
+    0x37, 1, 0x00,             // Vertical scroll zero
+    0x3a, 1, 0x55,             // COLMOD: Pixel Format Set
+    0xb1, 2, 0x00, 0x18,       // Frame Rate Control (In Normal Mode/Full Colors)
+    0xb6, 3, 0x08, 0xa2, 0x27, // Display Function Control
+    0xF2, 1, 0x00,                         // 3Gamma Function Disable
+    0x26, 1, 0x01,             // Gamma curve selected
+    0xe0, 15, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, // Set Gamma
+      0x4E, 0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
+    0xe1, 15, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, // Set Gamma
+      0x31, 0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
+    0x11, DELAY, 120,                // Exit Sleep
+    0x29, DELAY, 120, // Display on
+};
+
+void board_init(void) {
+    displayio_parallelbus_obj_t* bus = &displays[0].parallel_bus;
+    bus->base.type = &displayio_parallelbus_type;
+    common_hal_displayio_parallelbus_construct(bus,
+        &pin_PA16, // Data0
+        &pin_PB05, // Command or data
+        &pin_PB06, // Chip select
+        &pin_PB09, // Write
+        &pin_PB04, // Read
+        &pin_PA00); // Reset
+
+    displayio_display_obj_t* display = &displays[0].display;
+    display->base.type = &displayio_display_type;
+    common_hal_displayio_display_construct(display,
+        bus,
+        320, // Width
+        240, // Height
+        0, // column start
+        0, // row start
+        0, // rotation
+        16, // Color depth
+        false, // grayscale
+        false, // pixels_in_byte_share_row (unused for depths > 8)
+        1, // bytes per cell. Only valid for depths < 8
+        false, // reverse_pixels_in_byte. Only valid for depths < 8
+        MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
+        MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
+        MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
+        0x37, // Set vertical scroll command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        &pin_PB31, // Backlight pin
+        NO_BRIGHTNESS_COMMAND,
+        1.0f, // brightness (ignored)
+        true, // auto_brightness
+        false, // single_byte_bounds
+        false); // data_as_commands
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}
--- a/ports/atmel-samd/boards/pyportal_titano/mpconfigboard.h
+++ b/ports/atmel-samd/boards/pyportal_titano/mpconfigboard.h
@ -0,0 +1,40 @@
+#define MICROPY_HW_BOARD_NAME "Adafruit PyPortal Titano"
+#define MICROPY_HW_MCU_NAME "samd51j20"
+
+#define CIRCUITPY_MCU_FAMILY samd51
+
+// This is for Rev B
+
+#define MICROPY_HW_LED_STATUS   (&pin_PA27)
+
+#define MICROPY_HW_NEOPIXEL (&pin_PB22)
+
+// These are pins not to reset.
+// QSPI Data pins
+#define MICROPY_PORT_A ( PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11 )
+// QSPI CS, and QSPI SCK
+#define MICROPY_PORT_B ( PORT_PB10 | PORT_PB11 | PORT_PB22 )
+#define MICROPY_PORT_C ( 0 )
+#define MICROPY_PORT_D (0)
+
+#define AUTORESET_DELAY_MS 500
+
+// If you change this, then make sure to update the linker scripts as well to
+// make sure you don't overwrite code
+#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
+
+#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
+#define DEFAULT_I2C_BUS_SDA (&pin_PB02)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_PA13)
+#define DEFAULT_SPI_BUS_MOSI (&pin_PA12)
+#define DEFAULT_SPI_BUS_MISO (&pin_PA14)
+
+#define DEFAULT_UART_BUS_RX (&pin_PB13)
+#define DEFAULT_UART_BUS_TX (&pin_PB12)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
--- a/ports/atmel-samd/boards/pyportal_titano/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/pyportal_titano/mpconfigboard.mk
@ -0,0 +1,16 @@
+LD_FILE = boards/samd51x20-bootloader-external-flash.ld
+USB_VID = 0x239A
+USB_PID = 0x8054
+USB_PRODUCT = "PyPortal Titano"
+USB_MANUFACTURER = "Adafruit Industries LLC"
+
+CHIP_VARIANT = SAMD51J20A
+CHIP_FAMILY = samd51
+
+QSPI_FLASH_FILESYSTEM = 1
+EXTERNAL_FLASH_DEVICE_COUNT = 2
+EXTERNAL_FLASH_DEVICES = "W25Q64JV_IQ, GD25Q64C"
+LONGINT_IMPL = MPZ
+
+# No touch on SAMD51 yet
+CIRCUITPY_TOUCHIO = 0
--- a/ports/atmel-samd/boards/pyportal_titano/pins.c
+++ b/ports/atmel-samd/boards/pyportal_titano/pins.c
@ -0,0 +1,85 @@
+#include "shared-bindings/board/__init__.h"
+
+#include "boards/board.h"
+#include "shared-module/displayio/__init__.h"
+
+// This mapping only includes functional names because pins broken
+// out on connectors are labeled with their MCU name available from
+// microcontroller.pin.
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_PA02) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_AUDIO_OUT), MP_ROM_PTR(&pin_PA02) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) }, // analog out/in
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_PA27) },
+
+    // Light sensor
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_PA07) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA07) },
+
+    // STEMMA connectors
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA04) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA04) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA05) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA05) },
+
+    // Indicator LED
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PB23) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_PB23) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL),MP_ROM_PTR(&pin_PB22) },
+
+    // LCD pins
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_PA00) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RD), MP_ROM_PTR(&pin_PB04) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RS), MP_ROM_PTR(&pin_PB05) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_PB06) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_TE), MP_ROM_PTR(&pin_PB07) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_WR), MP_ROM_PTR(&pin_PB09) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_PB09) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_PB31) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA0), MP_ROM_PTR(&pin_PA16) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA1), MP_ROM_PTR(&pin_PA17) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA2), MP_ROM_PTR(&pin_PA18) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA3), MP_ROM_PTR(&pin_PA19) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA4), MP_ROM_PTR(&pin_PA20) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA5), MP_ROM_PTR(&pin_PA21) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA6), MP_ROM_PTR(&pin_PA22) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA7), MP_ROM_PTR(&pin_PA23) },
+
+    // Touch pins
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TOUCH_YD), MP_ROM_PTR(&pin_PB00) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TOUCH_XL), MP_ROM_PTR(&pin_PB01) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TOUCH_YU), MP_ROM_PTR(&pin_PA06) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TOUCH_XR), MP_ROM_PTR(&pin_PB08) },
+
+    // ESP control
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_CS), MP_ROM_PTR(&pin_PB14) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_GPIO0), MP_ROM_PTR(&pin_PB15) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_PB16) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_PB17) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RTS), MP_ROM_PTR(&pin_PA15) },
+
+    // UART
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB12) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB13) },
+
+    // SPI
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI),MP_ROM_PTR(&pin_PA12) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCK),MP_ROM_PTR(&pin_PA13) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MISO),MP_ROM_PTR(&pin_PA14) },
+
+    // I2C
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SDA),MP_ROM_PTR(&pin_PB02) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCL),MP_ROM_PTR(&pin_PB03) },
+
+    // SD Card
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SD_CS),MP_ROM_PTR(&pin_PB30) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SD_CARD_DETECT),MP_ROM_PTR(&pin_PA01) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);