rename nrf boards to feather_nrf52832 and feather_nrf52840_express
This commit is contained in:
Dan Halbert
parent
580a191cc8
commit
85df32907f
|
|
@ -36,9 +36,9 @@ the following links:
|
|||
> **NOTE**: These board specific readmes may be more up to date than the
|
||||
generic board-neutral documentation further down.
|
||||
|
||||
* Adafruit [Feather nRF52](boards/feather52/README.md): 512KB Flash, 64KB SRAM
|
||||
* Adafruit [Feather nRF52840](boards/feather52840/README.md): 1MB Flash, 256KB SRAM
|
||||
* Nordic PCA10056 see [Feather nRF52840](boards/feather52840/README.md)
|
||||
* Adafruit [Feather nRF52](boards/feather_nrf52832/README.md): 512KB Flash, 64KB SRAM
|
||||
* Adafruit [Feather nRF52840](boards/feather_nrf_52840_express/README.md): 1MB Flash, 256KB SRAM
|
||||
* Nordic PCA10056 see [Feather nRF52840](boards/pca10056/README.md)
|
||||
|
||||
For all other board targets, see the generic notes below.
|
||||
|
||||
|
|
@ -75,10 +75,11 @@ Note: further tuning of features to include in bluetooth or even setting up the
|
|||
## Target Boards and Make Flags
|
||||
|
||||
Target Board (BOARD) | Bluetooth Stack (SD) | Bluetooth Support | Flash Util
|
||||
---------------------|-------------------------|------------------------|-------------------------------
|
||||
-------------------------|-------------------------|------------------------|-------------------------------
|
||||
pca10040 | s132 | Peripheral and Scanner | [Segger](#segger-targets)
|
||||
feather52832 | s132 | Peripheral and Scanner | [UART DFU](#dfu-targets)
|
||||
pca10056 | s140 | Peripheral and Scanner | [Segger](#segger-targets)
|
||||
feather_nrf52832 | s132 | Peripheral and Scanner | [UART DFU](#dfu-targets)
|
||||
feather_nrf52840_express | s140 | Peripheral and Scanner | UF2 bootloader
|
||||
|
||||
## Segger Targets
|
||||
|
||||
|
|
@ -101,18 +102,18 @@ note: On Linux it might be required to link SEGGER's `libjlinkarm.so` inside nrf
|
|||
sudo apt-get install build-essential libffi-dev pkg-config gcc-arm-none-eabi git python python-pip
|
||||
git clone https://github.com/adafruit/Adafruit_nRF52_Arduino.git
|
||||
cd Adafruit_nRF52_Arduino/tools/nrfutil-0.5.2/
|
||||
sudo pip install -r requirements.txt
|
||||
sudo python setup.py install
|
||||
pip3 install --user -r requirements.txt
|
||||
python3 setup.py install --user
|
||||
|
||||
**make flash** and **make sd** will not work with DFU targets. Hence, **dfu-gen** and **dfu-flash** must be used instead.
|
||||
* dfu-gen: Generates a Firmware zip to be used by the DFU flash application.
|
||||
* dfu-flash: Triggers the DFU flash application to upload the firmware from the generated Firmware zip file.
|
||||
|
||||
Example on how to generate and flash feather52832 target:
|
||||
Example on how to generate and flash feather_nrf52832 target:
|
||||
|
||||
make BOARD=feather52832 SD=s132
|
||||
make BOARD=feather52832 SD=s132 dfu-gen
|
||||
make BOARD=feather52832 SD=s132 dfu-flash
|
||||
make BOARD=feather_nrf52832 SD=s132
|
||||
make BOARD=feather_nrf52832 SD=s132 dfu-gen
|
||||
make BOARD=feather_nrf52832 SD=s132 dfu-flash
|
||||
|
||||
## Bluetooth LE REPL
|
||||
|
||||
|
|
|
|||
|
|
@ -1,11 +0,0 @@
|
|||
MCU_SERIES = m4
|
||||
MCU_VARIANT = nrf52
|
||||
MCU_SUB_VARIANT = nrf52
|
||||
SD ?= s132
|
||||
SOFTDEV_VERSION ?= 2.0.1
|
||||
|
||||
LD_FILE = boards/feather52832/custom_nrf52832_dfu_app_$(SOFTDEV_VERSION).ld
|
||||
BOOT_FILE = boards/feather52832/bootloader/feather52_bootloader_$(SOFTDEV_VERSION)_s132_single
|
||||
|
||||
BOOT_SETTING_ADDR = 0x7F000
|
||||
NRF_DEFINES += -DNRF52832_XXAA
|
||||
|
|
@ -36,8 +36,8 @@ you can install pip via 'sudo easy_install pip'
|
|||
|
||||
```
|
||||
$ cd ../../lib/nrfutil
|
||||
$ sudo pip install -r requirements.txt
|
||||
$ sudo python setup.py install
|
||||
$ pip3 install --user -r requirements.txt
|
||||
$ python3 setup.py install
|
||||
```
|
||||
|
||||
# Building and flashing firmware images
|
||||
|
|
@ -47,12 +47,12 @@ $ sudo python setup.py install
|
|||
#### REPL over UART (default settings)
|
||||
|
||||
To build a CircuitPython binary with default settings for the
|
||||
`feather52832` target enter:
|
||||
`feather_nrf52832` target enter:
|
||||
|
||||
> **NOTE:** `BOARD=feather52832` is the default option and isn't stricly required.
|
||||
> **NOTE:** `BOARD=feather_nrf52832` is the default option and isn't stricly required.
|
||||
|
||||
```
|
||||
$ make BOARD=feather52832 V=1
|
||||
$ make BOARD=feather_nrf52832 V=1
|
||||
```
|
||||
|
||||
#### REPL over BLE UART (AKA 'NUS')
|
||||
|
|
@ -95,7 +95,7 @@ Feather52 boards to a single-bank CircuitPython compatible version:
|
|||
By default s132 v2.0.1 is used when no `SOFTDEV_VERSION` field is passed in:
|
||||
|
||||
```
|
||||
$ make BOARD=feather52832 SERIAL=/dev/tty.SLAB_USBtoUART boot-flash
|
||||
$ make BOARD=feather_nrf52832 SERIAL=/dev/tty.SLAB_USBtoUART boot-flash
|
||||
```
|
||||
|
||||
#### S132 v5.0.0 (BLE5, experimental):
|
||||
|
|
@ -103,7 +103,7 @@ $ make BOARD=feather52832 SERIAL=/dev/tty.SLAB_USBtoUART boot-flash
|
|||
To enable BLE5 support and the latest S132 release, flash the v5.0.0 bootloader via:
|
||||
|
||||
```
|
||||
$ make BOARD=feather52832 SERIAL=/dev/tty.SLAB_USBtoUART SOFTDEV_VERSION=5.0.0 boot-flash
|
||||
$ make BOARD=feather_nrf52832 SERIAL=/dev/tty.SLAB_USBtoUART SOFTDEV_VERSION=5.0.0 boot-flash
|
||||
```
|
||||
|
||||
### 2. Generate and flash a CircuitPython DFU .zip package over serial
|
||||
|
|
@ -117,7 +117,7 @@ image, as described earlier in this readme.
|
|||
> The name of the serial port target will vary, depending on your OS.
|
||||
|
||||
```
|
||||
$ make BOARD=feather52832 SERIAL=/dev/tty.SLAB_USBtoUART dfu-gen dfu-flash
|
||||
$ make BOARD=feather_nrf52832 SERIAL=/dev/tty.SLAB_USBtoUART dfu-gen dfu-flash
|
||||
```
|
||||
|
||||
By default, CircuitPython will build with **BLE** support enabled using
|
||||
|
|
@ -125,7 +125,7 @@ By default, CircuitPython will build with **BLE** support enabled using
|
|||
SD family or version you can enter the optional fields as shown below:
|
||||
|
||||
```
|
||||
$ make BOARD=feather52832 SERIAL=/dev/tty.SLAB_USBtoUART SD=s132 SOFTDEV_VERSION=5.0.0 dfu-gen dfu-flash
|
||||
$ make BOARD=feather_nrf52832 SERIAL=/dev/tty.SLAB_USBtoUART SD=s132 SOFTDEV_VERSION=5.0.0 dfu-gen dfu-flash
|
||||
```
|
||||
|
||||
## Working with CircuitPython
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
MCU_SERIES = m4
|
||||
MCU_VARIANT = nrf52
|
||||
MCU_SUB_VARIANT = nrf52
|
||||
SD ?= s132
|
||||
SOFTDEV_VERSION ?= 2.0.1
|
||||
|
||||
LD_FILE = boards/feather_nrf_52832/custom_nrf52832_dfu_app_$(SOFTDEV_VERSION).ld
|
||||
BOOT_FILE = boards/feather_nrf_52832/bootloader/feather52_bootloader_$(SOFTDEV_VERSION)_s132_single
|
||||
|
||||
BOOT_SETTING_ADDR = 0x7F000
|
||||
NRF_DEFINES += -DNRF52832_XXAA
|
||||
|
|
@ -4,6 +4,7 @@
|
|||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2016 Glenn Ruben Bakke
|
||||
* Copyright (c) 2018 Dan Halbert for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
|
|
@ -26,13 +27,49 @@
|
|||
|
||||
#define FEATHER52840
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "Feather52840"
|
||||
#define MICROPY_HW_BOARD_NAME "Adafruit Feather nRF52840 Express"
|
||||
#define MICROPY_HW_MCU_NAME "nRF52840"
|
||||
#define MICROPY_PY_SYS_PLATFORM "Feather52840"
|
||||
|
||||
#define MICROPY_HW_NEOPIXEL NRF_GPIO_PIN_MAP(0, 13)
|
||||
|
||||
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(1, 9)
|
||||
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 11)
|
||||
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 12)
|
||||
#define MICROPY_QSPI_DATA3 NRF_GPIO_PIN_MAP(0, 14)
|
||||
#define MICROPY_QSPI_SCK NRF_GPIO_PIN_MAP(0, 8)
|
||||
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(1, 8)
|
||||
|
||||
#define MICROPY_HW_UART_RX NRF_GPIO_PIN_MAP(0, 8)
|
||||
#define MICROPY_HW_UART_TX NRF_GPIO_PIN_MAP(0, 6)
|
||||
#define MICROPY_HW_UART_HWFC (0)
|
||||
|
||||
#define PORT_HEAP_SIZE (128 * 1024)
|
||||
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define PORT_HEAP_SIZE (128 * 1024)
|
||||
// TODO #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
// TODO #include "external_flash/devices.h"
|
||||
|
||||
#define EXTERNAL_FLASH_DEVICE_COUNT 1
|
||||
#define EXTERNAL_FLASH_DEVICES GD25Q16C
|
||||
|
||||
#define EXTERNAL_FLASH_QSPI_DUAL
|
||||
|
||||
// TODO include "external_flash/external_flash.h"
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL NRF_GPIO_PIN_MAP(1, 11)
|
||||
#define DEFAULT_I2C_BUS_SDA NRF_GPIO_PIN_MAP(1, 12)
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK NRF_GPIO_PIN_MAP(0, 20)
|
||||
#define DEFAULT_SPI_BUS_MOSI NRF_GPIO_PIN_MAP(0, 23)
|
||||
#define DEFAULT_SPI_BUS_MISO NRF_GPIO_PIN_MAP(0, 22)
|
||||
|
||||
#define DEFAULT_UART_BUS_RX NRF_GPIO_PIN_MAP(1, 0)
|
||||
#define DEFAULT_UART_BUS_TX NRF_GPIO_PIN_MAP(0, 24)
|
||||
|
|
@ -25,4 +25,4 @@
|
|||
*/
|
||||
|
||||
// Pins aren't actually defined here. They are in the board specific directory
|
||||
// such as boards/feather52832/pins.csv
|
||||
// such as boards/feather_nrf52832/pins.csv
|
||||
|
|
|
|||
|
|
@ -2,7 +2,30 @@ rm -rf ports/atmel-samd/build*
|
|||
rm -rf ports/esp8266/build*
|
||||
rm -rf ports/nrf/build*
|
||||
|
||||
ATMEL_BOARDS="arduino_zero circuitplayground_express circuitplayground_express_crickit feather_radiofruit_zigbee feather_m0_basic feather_m0_adalogger itsybitsy_m0_express itsybitsy_m4_express feather_m0_rfm69 feather_m0_rfm9x feather_m0_express feather_m0_express_crickit feather_m4_express metro_m0_express metro_m4_express pirkey_m0 trinket_m0 gemma_m0 feather52832 feather_huzzah pca10056 hallowing_m0_express"
|
||||
ATMEL_BOARDS="\
|
||||
arduino_zero \
|
||||
circuitplayground_express \
|
||||
circuitplayground_express_crickit \
|
||||
feather_huzzah \
|
||||
feather_m0_adalogger \
|
||||
feather_m0_basic \
|
||||
feather_m0_express \
|
||||
feather_m0_express_crickit \
|
||||
feather_m0_rfm69 \
|
||||
feather_m0_rfm9x \
|
||||
feather_m4_express \
|
||||
feather_nrf52832 \
|
||||
feather_nrf52840 \
|
||||
feather_radiofruit_zigbee \
|
||||
gemma_m0 \
|
||||
hallowing_m0_express \
|
||||
itsybitsy_m0_express \
|
||||
itsybitsy_m4_express \
|
||||
metro_m0_express \
|
||||
metro_m4_express \
|
||||
pirkey_m0 \
|
||||
trinket_m0 \
|
||||
"
|
||||
ROSIE_SETUPS="rosie-ci"
|
||||
|
||||
PARALLEL="-j 5"
|
||||
|
|
@ -41,11 +64,16 @@ for board in $boards; do
|
|||
(( exit_status = exit_status || $? ))
|
||||
temp_filename=ports/esp8266/build/firmware-combined.bin
|
||||
extension=bin
|
||||
elif [ $board == "feather52832" ]; then
|
||||
make $PARALLEL -C ports/nrf TRANSLATION=$language BOARD=feather52832
|
||||
elif [ $board == "feather_nrf52832" ]; then
|
||||
make $PARALLEL -C ports/nrf TRANSLATION=$language BOARD=feather_nrf52832
|
||||
(( exit_status = exit_status || $? ))
|
||||
temp_filename=ports/nrf/build-$board-s132/firmware.bin
|
||||
extension=bin
|
||||
elif [ $board == "feather_nrf52840_express" ]; then
|
||||
make $PARALLEL -C ports/nrf TRANSLATION=$language BOARD=feather_nrf52840_express SD=s140
|
||||
(( exit_status = exit_status || $? ))
|
||||
temp_filename=ports/nrf/build-$board-s140/firmware.bin
|
||||
extension=bin
|
||||
elif [ $board == "pca10056" ]; then
|
||||
make $PARALLEL -C ports/nrf TRANSLATION=$language BOARD=pca10056 SD=s140
|
||||
(( exit_status = exit_status || $? ))
|
||||
|
|
|
|||
Loading…
Reference in New Issue