Update translation files

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: CircuitPython/main
Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/

locale/ID.po

@@ -538,6 +538,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "Buffer terlalu pendek untuk %d byte"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -818,6 +819,10 @@ msgstr "DAC sudah digunakan"
 msgid "Data 0 pin must be byte aligned"
 msgstr "Data 0 pin harus byte disejajarkan"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Potongan data harus mengikuti fmt chunk"
@@ -1613,7 +1618,6 @@ msgstr ""
 "Frekuensi PWM tidak dapat ditulis ketika variabel_frequency Salah pada "
 "konstruksi."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/cs.po

@@ -534,6 +534,7 @@ msgid "Buffer too short by %d bytes"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -803,6 +804,10 @@ msgstr ""
 msgid "Data 0 pin must be byte aligned"
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr ""
@@ -1587,7 +1592,6 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/de_DE.po

@@ -539,6 +539,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "Buffer um %d Bytes zu kurz"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -815,6 +816,10 @@ msgstr "DAC wird schon benutzt"
 msgid "Data 0 pin must be byte aligned"
 msgstr "Data 0 pin muss am Byte ausgerichtet sein"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Dem fmt Block muss ein Datenblock folgen"
@@ -1612,7 +1617,6 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/el.po

@@ -531,6 +531,7 @@ msgid "Buffer too short by %d bytes"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -800,6 +801,10 @@ msgstr ""
 msgid "Data 0 pin must be byte aligned"
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr ""
@@ -1584,7 +1589,6 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/es.po

@@ -543,6 +543,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "Búffer muy corto por %d bytes"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -818,6 +819,10 @@ msgstr "DAC ya está siendo utilizado"
 msgid "Data 0 pin must be byte aligned"
 msgstr "El pin Data 0 debe estar alineado a bytes"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Trozo de datos debe seguir fmt chunk"
@@ -1613,7 +1618,6 @@ msgstr ""
 "La frecuencia de PWM no se puede escribir variable_frequency es False en la "
 "construcción."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/fil.po

@@ -536,6 +536,7 @@ msgid "Buffer too short by %d bytes"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, fuzzy, c-format
 msgid "Bus pin %d is already in use"
@@ -809,6 +810,10 @@ msgstr "Ginagamit na ang DAC"
 msgid "Data 0 pin must be byte aligned"
 msgstr "graphic ay dapat 2048 bytes ang haba"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Dapat sunurin ng Data chunk ang fmt chunk"
@@ -1603,7 +1608,6 @@ msgid ""
 msgstr ""
 "PWM frequency hindi writable kapag variable_frequency ay False sa pag buo."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/fr.po

@@ -548,6 +548,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "Tampon trop court de %d octets"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -831,6 +832,10 @@ msgstr "DAC déjà utilisé"
 msgid "Data 0 pin must be byte aligned"
 msgstr "La broche 'Data 0' doit être aligné sur l'octet"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Un bloc de données doit suivre un bloc fmt"
@@ -1631,7 +1636,6 @@ msgstr ""
 "La fréquence de PWM n'est pas modifiable quand variable_frequency est False "
 "à la construction."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/hi.po

@@ -531,6 +531,7 @@ msgid "Buffer too short by %d bytes"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -800,6 +801,10 @@ msgstr ""
 msgid "Data 0 pin must be byte aligned"
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr ""
@@ -1584,7 +1589,6 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/it_IT.po

@@ -536,6 +536,7 @@ msgid "Buffer too short by %d bytes"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, fuzzy, c-format
 msgid "Bus pin %d is already in use"
@@ -810,6 +811,10 @@ msgstr "DAC già in uso"
 msgid "Data 0 pin must be byte aligned"
 msgstr "graphic deve essere lunga 2048 byte"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr ""
@@ -1612,7 +1617,6 @@ msgstr ""
 "frequenza PWM frequency non è scrivibile quando variable_frequency è "
 "impostato nel costruttore a False."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/ja.po

@@ -538,6 +538,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "バッファが %d バイト足りません"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -811,6 +812,10 @@ msgstr "DACはすでに使用中"
 msgid "Data 0 pin must be byte aligned"
 msgstr "Data 0 ピンは、バイト整列されていなければなりません"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "fmtチャンクの後にdataチャンクが続かなければなりません"
@@ -1600,7 +1605,6 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "PWM周波数は生成時のvariable_frequencyがFalseのとき書き換え不可"
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/ko.po

@@ -534,6 +534,7 @@ msgid "Buffer too short by %d bytes"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -803,6 +804,10 @@ msgstr "DAC가 현재 사용 중입니다"
 msgid "Data 0 pin must be byte aligned"
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr ""
@@ -1587,7 +1592,6 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/nl.po

@@ -536,6 +536,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "Buffer is %d bytes te klein"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -811,6 +812,10 @@ msgstr "DAC al in gebruik"
 msgid "Data 0 pin must be byte aligned"
 msgstr "Data 0 pin moet byte uitgelijnd zijn"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Data chunk moet gevolgd worden door fmt chunk"
@@ -1607,7 +1612,6 @@ msgstr ""
 "PWM frequentie is niet schrijfbaar wanneer de variable_frequency False is "
 "tijdens constructie."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/pl.po

@@ -538,6 +538,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "Bufor za krótki o %d bajtów"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -811,6 +812,10 @@ msgstr "DAC w użyciu"
 msgid "Data 0 pin must be byte aligned"
 msgstr "Nóżka data 0 musi być wyrównana do bajtu"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Fragment danych musi następować po fragmencie fmt"
@@ -1598,7 +1603,6 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/pt_BR.po

@@ -548,6 +548,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "O buffer é muito curto em %d bytes"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -827,6 +828,10 @@ msgstr "DAC em uso"
 msgid "Data 0 pin must be byte aligned"
 msgstr "O pino de dados 0 deve ser alinhado por bytes"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Pedaço de dados deve seguir o pedaço de cortes"
@@ -1623,7 +1628,6 @@ msgstr ""
 "A frequência do PWM não pode ser gravada quando variable_frequency for False "
 "na construção."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/sv.po

@@ -540,6 +540,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "Buffert är %d bytes för kort"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -816,6 +817,10 @@ msgstr "DAC används redan"
 msgid "Data 0 pin must be byte aligned"
 msgstr "Datapinne 0 måste vara bytejusterad"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Datasegmentet måste följa fmt-segmentet"
@@ -1610,7 +1615,6 @@ msgstr ""
 "PWM-frekvensen är inte skrivbar när variable_frequency är falsk vid "
 "skapandet."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"

locale/zh_Latn_pinyin.po

@@ -542,6 +542,7 @@ msgid "Buffer too short by %d bytes"
 msgstr "Huǎn chōng qū tài duǎn ， àn %d zì jié"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
@@ -815,6 +816,10 @@ msgstr "Fā yuán huì yǐjīng shǐyòng"
 msgid "Data 0 pin must be byte aligned"
 msgstr "Shùjù 0 de yǐn jiǎo bìxū shì zì jié duìqí"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
+msgid "Data 0 pin must be byte aligned."
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
 msgstr "Shùjù kuài bìxū zūnxún fmt qū kuài"
@@ -1607,7 +1612,6 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Dāng biànliàng_pínlǜ shì False zài jiànzhú shí PWM pínlǜ bùkě xiě."
 
-#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -2525,7 +2529,8 @@ msgstr "wúfǎ cóng shǒudòng zìduàn guīgé qiēhuàn dào zìdòng zìduà
 
 #: extmod/ulab/code/ndarray_operators.c
 msgid "cannot cast output with casting rule"
-msgstr "wú fǎ shǐ yòng qiáng zhì zhuǎn huàn guī zé qiáng zhì zhuǎn huàn shū chū"
+msgstr ""
+"wú fǎ shǐ yòng qiáng zhì zhuǎn huàn guī zé qiáng zhì zhuǎn huàn shū chū"
 
 #: py/objtype.c
 msgid "cannot create '%q' instances"