Merge remote-tracking branch 'origin/main'
This commit is contained in:
Hosted Weblate
commit
854887c110
48
ports/espressif/boards/smartbeedesigns_bee_motion_s3/board.c
Normal file
48
ports/espressif/boards/smartbeedesigns_bee_motion_s3/board.c
Normal file
@ -0,0 +1,48 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "supervisor/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
#include "shared-bindings/microcontroller/Pin.h"
|
||||
|
||||
void board_init(void) {
|
||||
// Debug UART
|
||||
#ifdef DEBUG
|
||||
common_hal_never_reset_pin(&pin_GPIO43);
|
||||
common_hal_never_reset_pin(&pin_GPIO44);
|
||||
#endif /* DEBUG */
|
||||
}
|
||||
|
||||
bool board_requests_safe_mode(void) {
|
||||
return false;
|
||||
}
|
||||
|
||||
void reset_board(void) {
|
||||
|
||||
}
|
||||
|
||||
void board_deinit(void) {
|
||||
}
|
||||
@ -0,0 +1,41 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
// Micropython setup
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "Bee-Motion-S3"
|
||||
#define MICROPY_HW_MCU_NAME "ESP32S3"
|
||||
|
||||
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
|
||||
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO36)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO37)
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO17)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO15)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO16)
|
||||
@ -0,0 +1,20 @@
|
||||
USB_VID = 0x303A
|
||||
USB_PID = 0x8114
|
||||
USB_PRODUCT = "Bee-Motion-S3"
|
||||
USB_MANUFACTURER = "Smart Bee Designs"
|
||||
|
||||
IDF_TARGET = esp32s3
|
||||
|
||||
INTERNAL_FLASH_FILESYSTEM = 1
|
||||
LONGINT_IMPL = MPZ
|
||||
|
||||
# The default queue depth of 16 overflows on release builds,
|
||||
# so increase it to 32.
|
||||
CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
|
||||
|
||||
CIRCUITPY_ESP_FLASH_MODE = dio
|
||||
CIRCUITPY_ESP_FLASH_FREQ = 80m
|
||||
CIRCUITPY_ESP_FLASH_SIZE = 8MB
|
||||
|
||||
|
||||
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
|
||||
102
ports/espressif/boards/smartbeedesigns_bee_motion_s3/pins.c
Normal file
102
ports/espressif/boards/smartbeedesigns_bee_motion_s3/pins.c
Normal file
@ -0,0 +1,102 @@
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
||||
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_GPIO7) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A12), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A12), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A13), MP_ROM_PTR(&pin_GPIO13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A14), MP_ROM_PTR(&pin_GPIO14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A15), MP_ROM_PTR(&pin_GPIO15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO16) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_GPIO17) },
|
||||
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO36) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO36) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO37) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO37) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO48), MP_ROM_PTR(&pin_GPIO48) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO40) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO34) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D43), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44)},
|
||||
{ MP_ROM_QSTR(MP_QSTR_D44), MP_ROM_PTR(&pin_GPIO44) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_BOOT_BTN), MP_ROM_PTR(&pin_GPIO0) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VBAT), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VBAT_SENSE), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VBUS_SENSE), MP_ROM_PTR(&pin_GPIO2) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LIGHT_SENSOR), MP_ROM_PTR(&pin_GPIO3) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_PIR), MP_ROM_PTR(&pin_GPIO4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_PIR_SENSOR), MP_ROM_PTR(&pin_GPIO4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_), MP_ROM_PTR(&pin_GPIO34) },
|
||||
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||
@ -0,0 +1,6 @@
|
||||
# CONFIG_ESP32S3_SPIRAM_SUPPORT is not set
|
||||
#
|
||||
# LWIP
|
||||
#
|
||||
CONFIG_LWIP_LOCAL_HOSTNAME="smartbeedesigns_bee_motion_s3"
|
||||
# end of LWIP
|
||||
48
ports/espressif/boards/smartbeedesigns_bee_s3/board.c
Normal file
48
ports/espressif/boards/smartbeedesigns_bee_s3/board.c
Normal file
@ -0,0 +1,48 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "supervisor/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
#include "shared-bindings/microcontroller/Pin.h"
|
||||
|
||||
void board_init(void) {
|
||||
// Debug UART
|
||||
#ifdef DEBUG
|
||||
common_hal_never_reset_pin(&pin_GPIO43);
|
||||
common_hal_never_reset_pin(&pin_GPIO44);
|
||||
#endif /* DEBUG */
|
||||
}
|
||||
|
||||
bool board_requests_safe_mode(void) {
|
||||
return false;
|
||||
}
|
||||
|
||||
void reset_board(void) {
|
||||
|
||||
}
|
||||
|
||||
void board_deinit(void) {
|
||||
}
|
||||
@ -0,0 +1,41 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
// Micropython setup
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "Bee-S3"
|
||||
#define MICROPY_HW_MCU_NAME "ESP32S3"
|
||||
|
||||
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
|
||||
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO36)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO37)
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO39)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO38)
|
||||
@ -0,0 +1,20 @@
|
||||
USB_VID = 0x303A
|
||||
USB_PID = 0x8111
|
||||
USB_PRODUCT = "Bee-S3"
|
||||
USB_MANUFACTURER = "Smart Bee Designs"
|
||||
|
||||
IDF_TARGET = esp32s3
|
||||
|
||||
INTERNAL_FLASH_FILESYSTEM = 1
|
||||
LONGINT_IMPL = MPZ
|
||||
|
||||
# The default queue depth of 16 overflows on release builds,
|
||||
# so increase it to 32.
|
||||
CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
|
||||
|
||||
CIRCUITPY_ESP_FLASH_MODE = dio
|
||||
CIRCUITPY_ESP_FLASH_FREQ = 80m
|
||||
CIRCUITPY_ESP_FLASH_SIZE = 8MB
|
||||
|
||||
|
||||
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
|
||||
79
ports/espressif/boards/smartbeedesigns_bee_s3/pins.c
Normal file
79
ports/espressif/boards/smartbeedesigns_bee_s3/pins.c
Normal file
@ -0,0 +1,79 @@
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO3) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO3) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_GPIO7) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO36) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO36) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO37) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO37) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_GPIO38) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO38) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_GPIO39) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO39) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO48), MP_ROM_PTR(&pin_GPIO48) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO48) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D43), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44)},
|
||||
{ MP_ROM_QSTR(MP_QSTR_D44), MP_ROM_PTR(&pin_GPIO44) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VBAT), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VBAT_SENSE), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO1) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO34) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||
6
ports/espressif/boards/smartbeedesigns_bee_s3/sdkconfig
Normal file
6
ports/espressif/boards/smartbeedesigns_bee_s3/sdkconfig
Normal file
@ -0,0 +1,6 @@
|
||||
# CONFIG_ESP32S3_SPIRAM_SUPPORT is not set
|
||||
#
|
||||
# LWIP
|
||||
#
|
||||
CONFIG_LWIP_LOCAL_HOSTNAME="smartbeedesigns_bee_s3"
|
||||
# end of LWIP
|
||||
Loading…
Reference in New Issue
Block a user