diff --git a/locale/ID.po b/locale/ID.po index 6551a3253f..3aaca9e203 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -106,6 +106,7 @@ msgstr "%q berisi pin duplikat" msgid "%q failure: %d" msgstr "%q gagal: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -186,7 +187,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -399,6 +399,10 @@ msgstr "ADC2 sedang digunakan oleh WiFi" msgid "Address must be %d bytes long" msgstr "Alamat harus sepanjang %d byte" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "" @@ -479,7 +483,7 @@ msgstr "Sudah disebarkan." msgid "Already have all-matches listener" msgstr "" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -503,7 +507,7 @@ msgstr "Send yang lain sudah aktif" msgid "Array must contain halfwords (type 'H')" msgstr "Array harus mengandung halfwords (ketik 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Nilai array harus berupa byte tunggal." @@ -927,10 +931,10 @@ msgstr "Error pada regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Diharapkan %q" @@ -1033,7 +1037,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1648,11 +1651,14 @@ msgstr "" "Hanya monokrom, 4bpp atau 8bpp yang diindeks, dan 16bpp atau lebih yang " "didukung: %d bpp diberikan" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1773,6 +1779,10 @@ msgstr "" "ideal. Jika ini tidak dapat dihindari, berikan allow_inefficient=True ke " "konstruktor" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "Pin harus berurutan" @@ -1819,6 +1829,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull tidak digunakan saat arah output." @@ -1965,7 +1979,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Potongan dan nilai panjangnya berbeda." @@ -2239,8 +2253,8 @@ msgstr "Tidak dapat membaca data palet warna" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2498,7 +2512,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "diperlukan array/byte di sisi kanan" @@ -3757,7 +3771,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index 7e550d8140..5010b8b862 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -107,6 +107,7 @@ msgstr "%q obsahuje duplicitní piny" msgid "%q failure: %d" msgstr "%q: selhání %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -187,7 +188,6 @@ msgstr "%q je mimo hranice" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -400,6 +400,10 @@ msgstr "WiFi používá ADC2" msgid "Address must be %d bytes long" msgstr "Adresa musí být %d bajtů dlouhá" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Všechny CAN periferie jsou používány" @@ -480,7 +484,7 @@ msgstr "Již propagujeme." msgid "Already have all-matches listener" msgstr "" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -504,7 +508,7 @@ msgstr "Další odesílání je již aktivní" msgid "Array must contain halfwords (type 'H')" msgstr "Pole musí obsahovat poloviční slova (typ „H“)" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Hodnoty pole by měly být jednoduché bajty." @@ -925,10 +929,10 @@ msgstr "Chyba v regulárním výrazu" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Očekává se %q" @@ -1031,7 +1035,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1644,11 +1647,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1764,6 +1770,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1810,6 +1820,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" @@ -1954,7 +1968,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -2228,8 +2242,8 @@ msgstr "" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2485,7 +2499,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" @@ -3743,7 +3757,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index f587d384a1..3f1d800592 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -108,6 +108,7 @@ msgstr "%q enthält doppelte Pins" msgid "%q failure: %d" msgstr "%q Fehler: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -189,7 +190,6 @@ msgstr "%q außerhalb der Grenzen" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -403,6 +403,10 @@ msgstr "ADC2 wird vom WiFi benutzt" msgid "Address must be %d bytes long" msgstr "Die Adresse muss %d Bytes lang sein" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Alle CAN-Schnittstellen sind in Benutzung" @@ -483,7 +487,7 @@ msgstr "Bereits am Anbieten (advertising)." msgid "Already have all-matches listener" msgstr "All-Matchers-Listener bereits vorhanden" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -507,7 +511,7 @@ msgstr "Ein anderer Sendevorgang ist schon aktiv" msgid "Array must contain halfwords (type 'H')" msgstr "Array muss Halbwörter enthalten (type 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Array-Werte sollten aus Einzelbytes bestehen." @@ -933,10 +937,10 @@ msgstr "Fehler in regex" msgid "Error: Failure to bind" msgstr "Error: Bind Fehler" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Erwartet ein(e) %q" @@ -1040,7 +1044,6 @@ msgstr "Die Firmware ist doppelt vorhanden" msgid "Firmware is invalid" msgstr "Die Firmware ist ungültig" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "Die Firmware ist zu groß" @@ -1665,11 +1668,14 @@ msgstr "" "Nur monochrome, indizierte 4bpp oder 8bpp, und 16bpp oder größere BMPs " "unterstützt: %d bpp wurden gegeben" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "Nur ein %q kann im Deep-Sleep gesetzt werden." +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1788,6 +1794,10 @@ msgstr "" "Bytes verbraucht. Wenn dies nicht vermieden werden kann, übergib " "allow_inefficient=True an den Konstruktor" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "Pins müssen geordnet sein" @@ -1835,6 +1845,10 @@ msgstr "Programm macht OUT ohne Laden von OSR" msgid "Program size invalid" msgstr "Programm-Größe ist ungültig" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull wird nicht verwendet, wenn die Richtung output ist." @@ -1979,7 +1993,7 @@ msgstr "Größe nicht unterstützt" msgid "Sleep Memory not available" msgstr "Sleep-Speicher nicht verfügbar" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice und Wert (value) haben unterschiedliche Längen." @@ -2267,9 +2281,9 @@ msgstr "Konnte Farbpalettendaten nicht lesen" msgid "Unable to start mDNS query" msgstr "mDNS-Abfrage kann nicht gestartet werden" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" -msgstr "Schreiben nicht möglich" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." +msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." @@ -2540,7 +2554,7 @@ msgid "array has too many dimensions" msgstr "Das Array hat zu viele Dimensionen" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "Array/Bytes auf der rechten Seite erforderlich" @@ -3822,7 +3836,7 @@ msgid "only sample_rate=16000 is supported" msgstr "nur eine sample_rate=16000 wird unterstützt" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" @@ -4424,6 +4438,9 @@ msgstr "zi muss eine Gleitkommazahl sein" msgid "zi must be of shape (n_section, 2)" msgstr "zi muss die Form (n_section, 2) haben" +#~ msgid "Unable to write" +#~ msgstr "Schreiben nicht möglich" + #~ msgid "%q length must be >= 1" #~ msgstr "%q Länge muss >= 1 sein" diff --git a/locale/el.po b/locale/el.po index 7b4e3f2001..e022e3a90e 100644 --- a/locale/el.po +++ b/locale/el.po @@ -112,6 +112,7 @@ msgstr "%q περιέχει διπλότυπα pins" msgid "%q failure: %d" msgstr "%q αποτυχία: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -192,7 +193,6 @@ msgstr "%q εκτός ορίων" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -406,6 +406,10 @@ msgstr "Το ADC2 χρησιμοποιείται απο το WIFI" msgid "Address must be %d bytes long" msgstr "Η διεύθυνση πρέπει να είναι %d bytes μεγάλη" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Όλα τα περιφεριακά CAN είναι σε χρήση" @@ -486,7 +490,7 @@ msgstr "Ήδη διαφημίζουμε." msgid "Already have all-matches listener" msgstr "Ύπάρχει ήδη all-matches ακροατής" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -510,7 +514,7 @@ msgstr "Άλλη αποστολή είναι ήδη ενεργή" msgid "Array must contain halfwords (type 'H')" msgstr "H παράταξη πρέπει να περιέχει halfwords (τύπου 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Η τιμές της παράταξη πρέπει να είναι μονά bytes." @@ -939,10 +943,10 @@ msgstr "" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "" @@ -1045,7 +1049,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1653,11 +1656,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1773,6 +1779,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1819,6 +1829,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" @@ -1963,7 +1977,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -2237,8 +2251,8 @@ msgstr "" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2494,7 +2508,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" @@ -3752,7 +3766,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" diff --git a/locale/en_GB.po b/locale/en_GB.po index 8c97dbb7e2..0f166288bf 100644 --- a/locale/en_GB.po +++ b/locale/en_GB.po @@ -110,6 +110,7 @@ msgstr "%q contains duplicate pins" msgid "%q failure: %d" msgstr "%q failure: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -190,7 +191,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -403,6 +403,10 @@ msgstr "ADC2 is being used by WiFi" msgid "Address must be %d bytes long" msgstr "Address must be %d bytes long" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "All CAN peripherals are in use" @@ -483,7 +487,7 @@ msgstr "Already advertising." msgid "Already have all-matches listener" msgstr "Already have all-matches listener" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -507,7 +511,7 @@ msgstr "Another send is already active" msgid "Array must contain halfwords (type 'H')" msgstr "Array must contain halfwords (type 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Array values should be single bytes." @@ -928,10 +932,10 @@ msgstr "Error in regex" msgid "Error: Failure to bind" msgstr "Error: Failure to bind" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Expected a %q" @@ -1034,7 +1038,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1648,11 +1651,14 @@ msgstr "" "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " "%d bpp given" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1772,6 +1778,10 @@ msgstr "" "bytes. If this cannot be avoided, pass allow_inefficient=True to the " "constructor" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "Pins must be sequential" @@ -1816,6 +1826,10 @@ msgstr "Program does OUT without loading OSR" msgid "Program size invalid" msgstr "Program size invalid" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull not used when direction is output." @@ -1960,7 +1974,7 @@ msgstr "Size not supported" msgid "Sleep Memory not available" msgstr "Sleep Memory not available" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice and value different lengths." @@ -2241,8 +2255,8 @@ msgstr "Unable to read colour palette data" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2501,7 +2515,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "array/bytes required on right side" @@ -3762,7 +3776,7 @@ msgid "only sample_rate=16000 is supported" msgstr "only sample_rate=16000 is supported" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "only slices with step=1 (aka None) are supported" diff --git a/locale/es.po b/locale/es.po index 01f73ffd86..dd420bbd2e 100644 --- a/locale/es.po +++ b/locale/es.po @@ -112,6 +112,7 @@ msgstr "%q contiene pines duplicados" msgid "%q failure: %d" msgstr "%q fallo: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -192,7 +193,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -405,6 +405,10 @@ msgstr "ADC2 está siendo usado por WiFi" msgid "Address must be %d bytes long" msgstr "La dirección debe tener %d bytes de largo" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Todos los periféricos CAN están en uso" @@ -487,7 +491,7 @@ msgstr "Ya se encuentra publicando." msgid "Already have all-matches listener" msgstr "Ya se tiene un escucha de todas las coincidencias" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -511,7 +515,7 @@ msgstr "Otro envío ya está activo" msgid "Array must contain halfwords (type 'H')" msgstr "El array debe contener medias palabras (escriba 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Valores del array deben ser bytes individuales." @@ -938,10 +942,10 @@ msgstr "Error en regex" msgid "Error: Failure to bind" msgstr "Error: fallo al vincular" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Se espera un %q" @@ -1044,7 +1048,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1672,11 +1675,14 @@ msgstr "" "Solo se admiten BMP monocromáticos, indexados de 4 bpp u 8 bpp y 16 bpp o " "más: %d bpp proporcionados" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1797,6 +1803,10 @@ msgstr "" "ideales. Si esto no se puede evitar, pase allow_inefficient=True al " "constructor" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "Los pines deben estar en orden secuencial" @@ -1844,6 +1854,10 @@ msgstr "El programa hace OUT sin cargar OSR" msgid "Program size invalid" msgstr "El tamaño del programa no es correcto" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull no se usa cuando la dirección es output." @@ -1989,7 +2003,7 @@ msgstr "Sin capacidades para el tamaño" msgid "Sleep Memory not available" msgstr "Memoria de sueño no disponible" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice y value tienen tamaños diferentes." @@ -2273,8 +2287,8 @@ msgstr "No se pudo leer los datos de la paleta de colores" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2537,7 +2551,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "array/bytes requeridos en el lado derecho" @@ -3809,7 +3823,7 @@ msgid "only sample_rate=16000 is supported" msgstr "solo se admite sample_rate=16000" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "solo se admiten segmentos con step=1 (alias None)" diff --git a/locale/fil.po b/locale/fil.po index a4255383bd..7844d12562 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -101,6 +101,7 @@ msgstr "" msgid "%q failure: %d" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -181,7 +182,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -395,6 +395,10 @@ msgstr "" msgid "Address must be %d bytes long" msgstr "ang palette ay dapat 32 bytes ang haba" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "" @@ -476,7 +480,7 @@ msgstr "" msgid "Already have all-matches listener" msgstr "" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -500,7 +504,7 @@ msgstr "Isa pang send ay aktibo na" msgid "Array must contain halfwords (type 'H')" msgstr "May halfwords (type 'H') dapat ang array" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Array values ay dapat single bytes." @@ -924,10 +928,10 @@ msgstr "May pagkakamali sa REGEX" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Umasa ng %q" @@ -1030,7 +1034,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1643,11 +1646,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1764,6 +1770,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1808,6 +1818,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull hindi ginagamit kapag ang direksyon ay output." @@ -1953,7 +1967,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice at value iba't ibang haba." @@ -2227,8 +2241,8 @@ msgstr "" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2486,7 +2500,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "array/bytes kinakailangan sa kanang bahagi" @@ -3761,7 +3775,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "ang mga slices lamang na may hakbang = 1 (aka None) ang sinusuportahan" diff --git a/locale/fr.po b/locale/fr.po index 1b31a9dcce..0f0afce8ff 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -112,6 +112,7 @@ msgstr "%q contient des broches en double" msgid "%q failure: %d" msgstr "Échec de %q : %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -192,7 +193,6 @@ msgstr "%q est hors limites" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -405,6 +405,10 @@ msgstr "ADC2 est utilisé pars le Wifi" msgid "Address must be %d bytes long" msgstr "L'adresse doit être longue de %d octets" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Tous les périphériques CAN sont utilisés" @@ -485,7 +489,7 @@ msgstr "S'annonce déjà." msgid "Already have all-matches listener" msgstr "Il y a déjà un auditeur all-matches" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -509,7 +513,7 @@ msgstr "Un autre envoi est déjà actif" msgid "Array must contain halfwords (type 'H')" msgstr "La matrice doit contenir des demi-mots (type 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Les valeurs de la matrice doivent être des octets singuliers." @@ -948,10 +952,10 @@ msgstr "Erreur dans l'expression régulière" msgid "Error: Failure to bind" msgstr "Erreur : Impossible de lier" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Attendu un %q" @@ -1055,7 +1059,6 @@ msgstr "Le logiciel est identique" msgid "Firmware is invalid" msgstr "Logiciel invalide" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "Logiciel trop volumineux" @@ -1692,11 +1695,14 @@ msgstr "" "Seulement les BMP monochromes, 4 bpp ou 8 bpp, ou 16 bpp et plus sont " "supportés: %d bpp fournis" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "Une seul %q autorisée en sommeil profond." +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1817,6 +1823,10 @@ msgstr "" "octets idéal. Si cela ne peut pas être évité, transmettez allow_inefficient " "= True au constructeur" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "Les broches doivent être séquentielles" @@ -1865,6 +1875,10 @@ msgstr "Le programme fait des sorties sans charger d'OSR" msgid "Program size invalid" msgstr "Taille du programme invalide" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'." @@ -2009,7 +2023,7 @@ msgstr "Taille n'est pas supportée" msgid "Sleep Memory not available" msgstr "La mémoire de sommeil n'est pas disponible" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Tranche et valeur de tailles différentes." @@ -2298,9 +2312,9 @@ msgstr "Impossible de lire les données de la palette de couleurs" msgid "Unable to start mDNS query" msgstr "Impossible de lancer la requête mDNS" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" -msgstr "Écriture impossible" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." +msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." @@ -2569,7 +2583,7 @@ msgid "array has too many dimensions" msgstr "la tableau à trop de dimensions" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "matrice/octets requis à la droite" @@ -3852,7 +3866,7 @@ msgid "only sample_rate=16000 is supported" msgstr "seul sample_rate = 16000 est pris en charge" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "seules les tranches avec 'step=1' (cad None) sont supportées" @@ -4452,6 +4466,9 @@ msgstr "zi doit être de type float" msgid "zi must be of shape (n_section, 2)" msgstr "zi doit être de forme (n_section, 2)" +#~ msgid "Unable to write" +#~ msgstr "Écriture impossible" + #~ msgid "%q length must be >= 1" #~ msgstr "La longueur de %q doit être >= 1" diff --git a/locale/hi.po b/locale/hi.po index 3b7e9f26d4..7243d82e75 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -100,6 +100,7 @@ msgstr "" msgid "%q failure: %d" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -180,7 +181,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -393,6 +393,10 @@ msgstr "" msgid "Address must be %d bytes long" msgstr "" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "" @@ -473,7 +477,7 @@ msgstr "" msgid "Already have all-matches listener" msgstr "" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -497,7 +501,7 @@ msgstr "" msgid "Array must contain halfwords (type 'H')" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "" @@ -914,10 +918,10 @@ msgstr "" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "" @@ -1020,7 +1024,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1628,11 +1631,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1748,6 +1754,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1792,6 +1802,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" @@ -1936,7 +1950,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -2210,8 +2224,8 @@ msgstr "" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2467,7 +2481,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" @@ -3725,7 +3739,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index d21b120e58..401a9b9848 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -107,6 +107,7 @@ msgstr "" msgid "%q failure: %d" msgstr "%q fallito: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -187,7 +188,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -401,6 +401,10 @@ msgstr "ADC2 sta usando il WiFi" msgid "Address must be %d bytes long" msgstr "L'indirizzo deve essere lungo %d byte" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Tutte le periferiche CAN sono in uso" @@ -482,7 +486,7 @@ msgstr "" msgid "Already have all-matches listener" msgstr "Già in possesso di tutti i listener abbinati" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -506,7 +510,7 @@ msgstr "Another send è gia activato" msgid "Array must contain halfwords (type 'H')" msgstr "Array deve avere mezzoparole (typo 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "I valori dell'Array dovrebbero essere bytes singoli." @@ -929,10 +933,10 @@ msgstr "Errore nella regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Atteso un %q" @@ -1035,7 +1039,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1650,11 +1653,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1773,6 +1779,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1818,6 +1828,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" @@ -1963,7 +1977,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -2237,8 +2251,8 @@ msgstr "" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2496,7 +2510,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" @@ -3772,7 +3786,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "solo slice con step=1 (aka None) sono supportate" diff --git a/locale/ja.po b/locale/ja.po index 124bb762af..0c099d26c3 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -105,6 +105,7 @@ msgstr "" msgid "%q failure: %d" msgstr "%q 失敗: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -185,7 +186,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -398,6 +398,10 @@ msgstr "" msgid "Address must be %d bytes long" msgstr "アドレスは、%dバイト長でなければなりません" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "全てのCAN周辺機器が使用中" @@ -478,7 +482,7 @@ msgstr "すでにアドバータイズ中" msgid "Already have all-matches listener" msgstr "" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -502,7 +506,7 @@ msgstr "他のsendがすでにアクティブ" msgid "Array must contain halfwords (type 'H')" msgstr "array のタイプは16ビット ('H') でなければなりません" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Arrayの各値は1バイトでなければなりません" @@ -923,10 +927,10 @@ msgstr "正規表現にエラーがあります" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "%qが必要" @@ -1029,7 +1033,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1641,11 +1644,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1761,6 +1767,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1805,6 +1815,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "方向がoutputのときpullは使われません" @@ -1949,7 +1963,7 @@ msgstr "サイズは対応していません" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "スライスと値の長さが一致しません" @@ -2224,8 +2238,8 @@ msgstr "カラーパレットデータを読み込めません" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2481,7 +2495,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "右辺にはarray/bytesが必要" @@ -3744,7 +3758,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" diff --git a/locale/ko.po b/locale/ko.po index fda78fbd95..83832d31ef 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -101,6 +101,7 @@ msgstr "" msgid "%q failure: %d" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -181,7 +182,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -394,6 +394,10 @@ msgstr "" msgid "Address must be %d bytes long" msgstr "" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "" @@ -474,7 +478,7 @@ msgstr "" msgid "Already have all-matches listener" msgstr "" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -498,7 +502,7 @@ msgstr "" msgid "Array must contain halfwords (type 'H')" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "" @@ -917,10 +921,10 @@ msgstr "Regex에 오류가 있습니다." msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "%q 이 예상되었습니다." @@ -1023,7 +1027,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1631,11 +1634,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1751,6 +1757,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1795,6 +1805,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" @@ -1939,7 +1953,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -2214,8 +2228,8 @@ msgstr "" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2471,7 +2485,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" @@ -3729,7 +3743,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 2bdb6e8a4c..f639bcec2a 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -103,6 +103,7 @@ msgstr "" msgid "%q failure: %d" msgstr "%q fout: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -183,7 +184,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -396,6 +396,10 @@ msgstr "ADC2 wordt gebruikt door WiFi" msgid "Address must be %d bytes long" msgstr "Adres moet %d bytes lang zijn" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Alle CAN-peripherals zijn in gebruik" @@ -476,7 +480,7 @@ msgstr "Advertising is al bezig." msgid "Already have all-matches listener" msgstr "Heeft al een luisteraar voor 'all-matches'" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -500,7 +504,7 @@ msgstr "Een andere send is al actief" msgid "Array must contain halfwords (type 'H')" msgstr "Array moet halfwords (type 'H') bevatten" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Array waardes moet enkele bytes zijn." @@ -922,10 +926,10 @@ msgstr "Fout in regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Verwacht een %q" @@ -1028,7 +1032,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1645,11 +1648,14 @@ msgstr "" "Alleen monochrome en 4bpp of 8bpp, en 16bpp of grotere geïndiceerde BMP's " "zijn ondersteund: %d bpp is gegeven" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1770,6 +1776,10 @@ msgstr "" "gebruikt. Als dit niet kan worden vermeden, geef dan het argument " "allow_inefficient=True aan de constructor" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1816,6 +1826,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull niet gebruikt wanneer de richting output is." @@ -1960,7 +1974,7 @@ msgstr "Afmeting niet ondersteund" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice en waarde hebben verschillende lengtes." @@ -2234,8 +2248,8 @@ msgstr "Niet in staat kleurenpalet data te lezen" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2497,7 +2511,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "array/bytes vereist aan de rechterkant" @@ -3762,7 +3776,7 @@ msgid "only sample_rate=16000 is supported" msgstr "alleen sample_rate=16000 wordt ondersteund" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "alleen segmenten met step=1 (ook wel None) worden ondersteund" diff --git a/locale/pl.po b/locale/pl.po index b399da6db1..39853c1ddf 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -105,6 +105,7 @@ msgstr "" msgid "%q failure: %d" msgstr "%q niepowodzenie: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -185,7 +186,6 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -398,6 +398,10 @@ msgstr "ADC2 jest używany przez WiFi" msgid "Address must be %d bytes long" msgstr "Adres musi mieć %d bajtów" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "" @@ -478,7 +482,7 @@ msgstr "" msgid "Already have all-matches listener" msgstr "" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -502,7 +506,7 @@ msgstr "Wysyłanie jest już w toku" msgid "Array must contain halfwords (type 'H')" msgstr "Tablica musi zawierać pół-słowa (typ 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Wartości powinny być bajtami." @@ -923,10 +927,10 @@ msgstr "Błąd w regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Oczekiwano %q" @@ -1029,7 +1033,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "" @@ -1639,11 +1642,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1759,6 +1765,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1803,6 +1813,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Podciągnięcie nieużywane w trybie wyjścia." @@ -1947,7 +1961,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Fragment i wartość są różnych długości." @@ -2221,8 +2235,8 @@ msgstr "Nie można odczytać danych palety" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2478,7 +2492,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "tablica/bytes wymagane po prawej stronie" @@ -3737,7 +3751,7 @@ msgid "only sample_rate=16000 is supported" msgstr "obsługiwane jest tylko sample_rate=16000" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "tylko fragmenty ze step=1 (lub None) są wspierane" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index c0e64fd9dc..4a95e608d4 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -109,6 +109,7 @@ msgstr "%q contém pinos duplicados" msgid "%q failure: %d" msgstr "%q falha: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -189,7 +190,6 @@ msgstr "%q fora dos limites" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -406,6 +406,10 @@ msgstr "O ADC2 está sendo usado pelo WiFi" msgid "Address must be %d bytes long" msgstr "O endereço deve ter %d bytes de comprimento" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Todos os periféricos CAN estão em uso" @@ -486,7 +490,7 @@ msgstr "Já está anunciando." msgid "Already have all-matches listener" msgstr "Já há um ouvinte com todas as correspondências" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -510,7 +514,7 @@ msgstr "Outro envio já está ativo" msgid "Array must contain halfwords (type 'H')" msgstr "Array deve conter meias palavras (tipo 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Os valores das matrizes devem ser bytes simples." @@ -941,10 +945,10 @@ msgstr "Erro no regex" msgid "Error: Failure to bind" msgstr "Erro: Falha na vinculação" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Esperado um" @@ -1047,7 +1051,6 @@ msgstr "O firmware está duplicado" msgid "Firmware is invalid" msgstr "O firmware é inválido" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "O firmware é muito grande" @@ -1674,11 +1677,14 @@ msgstr "" "São compatíveis apenas os BMPs monocromáticos, indexados em 4bpp ou 8bpp e " "16bpp ou superior: determinado %d bpp" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "Apenas um %q pode ser colocado em hibernação profunda." +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1799,6 +1805,10 @@ msgstr "" "ideal. Caso isso não possa ser evitado, passe allow_inefficient=True ao " "construtor" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "Os pinos devem ser sequenciais" @@ -1848,6 +1858,10 @@ msgstr "O programa faz OUT sem carregar o OSR" msgid "Program size invalid" msgstr "O tamanho do programa é inválido" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "O Pull não foi usado quando a direção for gerada." @@ -1992,7 +2006,7 @@ msgstr "O tamanho não é suportado" msgid "Sleep Memory not available" msgstr "Sleep memory não está disponível" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Fatie e avalie os diferentes comprimentos." @@ -2280,9 +2294,9 @@ msgstr "Não foi possível ler os dados da paleta de cores" msgid "Unable to start mDNS query" msgstr "Não é possível iniciar a consulta mDNS" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" -msgstr "Não é possível escrever" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." +msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." @@ -2550,7 +2564,7 @@ msgid "array has too many dimensions" msgstr "a matriz possui muitas dimensões" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "matriz/bytes são necessários no lado direito" @@ -3825,7 +3839,7 @@ msgid "only sample_rate=16000 is supported" msgstr "apenas sample_rate = 16000 é compatível" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" @@ -4427,6 +4441,9 @@ msgstr "zi deve ser de um tipo float" msgid "zi must be of shape (n_section, 2)" msgstr "zi deve estar na forma (n_section, 2)" +#~ msgid "Unable to write" +#~ msgstr "Não é possível escrever" + #~ msgid "%q length must be >= 1" #~ msgstr "o comprimento %q deve ser >=1" diff --git a/locale/ru.po b/locale/ru.po index 014adb5f94..ef8dc019b4 100644 --- a/locale/ru.po +++ b/locale/ru.po @@ -111,6 +111,7 @@ msgstr "%q содержит пины-дупликаты" msgid "%q failure: %d" msgstr "%q сбой: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -191,7 +192,6 @@ msgstr "%q за пределом" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -404,6 +404,10 @@ msgstr "ADC2 используется WiFi" msgid "Address must be %d bytes long" msgstr "Адрес должен быть длиной %d байт" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Все периферийные устройства CAN уже используются" @@ -484,7 +488,7 @@ msgstr "Уже объявляемся (advertising)." msgid "Already have all-matches listener" msgstr "Уже есть универсальный слушатель" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -508,7 +512,7 @@ msgstr "Другая передача уже активна" msgid "Array must contain halfwords (type 'H')" msgstr "Массив должен содержать полуслова (тип 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Значения массива должны быть однобайтовыми." @@ -945,10 +949,10 @@ msgstr "Ошибка в регулярном выражении(regex)" msgid "Error: Failure to bind" msgstr "Ошибка: Сбой привязки" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Ожидалось(ся) %q" @@ -1054,7 +1058,6 @@ msgstr "Прошивка является дубликатом" msgid "Firmware is invalid" msgstr "Прошивка является неправильной" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "Прошивка слишком большая" @@ -1689,11 +1692,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1812,6 +1818,10 @@ msgstr "" "%d байт. Если этого нельзя избежать, передайте allow_inefficient=True в " "конструктор" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "Пины должны быть последовательными" @@ -1858,6 +1868,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" @@ -2002,7 +2016,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -2278,8 +2292,8 @@ msgstr "" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2535,7 +2549,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" @@ -3793,7 +3807,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" diff --git a/locale/sv.po b/locale/sv.po index 85d9845b78..74cd6978c7 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -108,6 +108,7 @@ msgstr "%q innehåller dubblettstift" msgid "%q failure: %d" msgstr "%q-fel: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -190,7 +191,6 @@ msgstr "%q är utanför gränserna" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -403,6 +403,10 @@ msgstr "ADC2 används av WiFi" msgid "Address must be %d bytes long" msgstr "Adressen måste vara %d byte lång" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "All I2C-kringutrustning används" @@ -483,7 +487,7 @@ msgstr "Annonserar redan." msgid "Already have all-matches listener" msgstr "Har redan lyssnare för all-matchningar" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -507,7 +511,7 @@ msgstr "En annan send är redan aktiv" msgid "Array must contain halfwords (type 'H')" msgstr "Matrisen måste innehålla halfwords (typ \"H\")" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Matrisvärden ska bestå av enstaka bytes." @@ -931,10 +935,10 @@ msgstr "Fel i regex" msgid "Error: Failure to bind" msgstr "Fel: Bind misslyckades" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Förväntade %q" @@ -1037,7 +1041,6 @@ msgstr "Firmware är en dubblett" msgid "Firmware is invalid" msgstr "Firmware är ogiltig" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "Firmware är för stor" @@ -1657,11 +1660,14 @@ msgstr "" "Endast monokrom, indexerad 4 bpp eller 8 bpp och 16 bpp eller högre BMP: er " "stöds: %d bpp angiven" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "Endast en %q kan sättas i djup sömn." +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1782,6 +1788,10 @@ msgstr "" "%d byte. Om detta inte kan undvikas, skicka allow_inefficient=True till " "konstruktorn" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "Pinnarna måste vara i sekvens" @@ -1828,6 +1838,10 @@ msgstr "Program gör OUT utan att läsa in OSR" msgid "Program size invalid" msgstr "Programstorlek ogiltig" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull används inte när riktningen är output." @@ -1972,7 +1986,7 @@ msgstr "Storleken stöds inte" msgid "Sleep Memory not available" msgstr "Sömnminne inte tillgängligt" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice och värde har olika längd." @@ -2256,9 +2270,9 @@ msgstr "Det går inte att läsa färgpalettdata" msgid "Unable to start mDNS query" msgstr "Det gick inte att starta mDNS-frågan" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" -msgstr "Kan inte skriva" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." +msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." @@ -2523,7 +2537,7 @@ msgid "array has too many dimensions" msgstr "array har för många dimensioner" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "array/bytes krävs på höger sida" @@ -3791,7 +3805,7 @@ msgid "only sample_rate=16000 is supported" msgstr "enbart sample_rate=16000 stöds" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "endast segment med steg=1 (aka Ingen) stöds" @@ -4389,6 +4403,9 @@ msgstr "zi måste vara av typ float" msgid "zi must be of shape (n_section, 2)" msgstr "zi måste vara i formen (n_section, 2)" +#~ msgid "Unable to write" +#~ msgstr "Kan inte skriva" + #~ msgid "%q length must be >= 1" #~ msgstr "längden på %q måste vara >= 1" diff --git a/locale/tr.po b/locale/tr.po index b5685d0878..bafd72bd7e 100644 --- a/locale/tr.po +++ b/locale/tr.po @@ -112,6 +112,7 @@ msgstr "%q yinelenen pinler içeriyor" msgid "%q failure: %d" msgstr "%q hata: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -192,7 +193,6 @@ msgstr "%q sınırların dışında" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -406,6 +406,10 @@ msgstr "ADC2, WiFi tarafından kullanılmaktadır" msgid "Address must be %d bytes long" msgstr "Adres %d byte uzunluğunda olmalıdır" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Tüm CAN çevre birimleri kullanımda" @@ -486,7 +490,7 @@ msgstr "Halihazırda duyuruluyor." msgid "Already have all-matches listener" msgstr "Tüm eşleşmelerle eşleşen dinleyiciniz var" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -510,7 +514,7 @@ msgstr "Başka bir gönderme zaten aktif" msgid "Array must contain halfwords (type 'H')" msgstr "Dizi yarımsözcüklere sahip olmalıdır (tip 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Dizi değerleri tekil bytelar olmalıdır." @@ -930,10 +934,10 @@ msgstr "regex'te hata" msgid "Error: Failure to bind" msgstr "Hata: Bağlanamadı" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "%q bekleniyor" @@ -1036,7 +1040,6 @@ msgstr "" msgid "Firmware is invalid" msgstr "Yazılım geçersiz" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "Yazılım çok büyük" @@ -1651,11 +1654,14 @@ msgid "" "%d bpp given" msgstr "" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "" +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1771,6 +1777,10 @@ msgid "" "constructor" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" @@ -1818,6 +1828,10 @@ msgstr "" msgid "Program size invalid" msgstr "" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" @@ -1962,7 +1976,7 @@ msgstr "" msgid "Sleep Memory not available" msgstr "" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -2236,8 +2250,8 @@ msgstr "" msgid "Unable to start mDNS query" msgstr "" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." msgstr "" #: shared-bindings/nvm/ByteArray.c @@ -2493,7 +2507,7 @@ msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" @@ -3751,7 +3765,7 @@ msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 89f1c00379..b89f9cd9b5 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -111,6 +111,7 @@ msgstr "%q bāo hán chóng fù de yǐn jiǎo" msgid "%q failure: %d" msgstr "%q Shībài: %d" +#: ports/espressif/common-hal/espulp/ULP.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/digitalio/DigitalInOut.c #: shared-bindings/microcontroller/Pin.c @@ -192,7 +193,6 @@ msgstr "%q chāo chū jiè xiàn" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c @@ -405,6 +405,10 @@ msgstr "ADC2 zhèngzài bèi WiFi shǐ yòng" msgid "Address must be %d bytes long" msgstr "dìzhǐ chángdù bìxū shì %d zìjié" +#: ports/espressif/common-hal/memorymap/AddressRange.c +msgid "Address range not allowed" +msgstr "" + #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "suǒyǒu CAN wàishè dōu zài shǐyòng zhōng" @@ -485,7 +489,7 @@ msgstr "Mùqián zhèngzài guǎngbō." msgid "Already have all-matches listener" msgstr "yǐjīng yǒu all-matches jiāntīng qì" -#: ports/espressif/common-hal/coproc/__init__.c +#: ports/espressif/common-hal/espulp/ULP.c #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" @@ -509,7 +513,7 @@ msgstr "Lìng yīgè fāsòng (send) yǐjīng zài gōngzuò" msgid "Array must contain halfwords (type 'H')" msgstr "Shùzǔ bìxū bāohán halfwords (type 'H')" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "shùzǔ de zhí yīnggāi shì dān'gè zìjié." @@ -932,10 +936,10 @@ msgstr "Zhèngzé biǎodá shì cuòwù" msgid "Error: Failure to bind" msgstr "cuò wù: bǎng dìng shī bài" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c -#: shared-bindings/alarm/__init__.c shared-bindings/alarm/coproc/CoprocAlarm.c -#: shared-bindings/busio/SPI.c shared-bindings/coproc/Coproc.c -#: shared-bindings/coproc/__init__.c shared-bindings/microcontroller/Pin.c +#: ports/espressif/bindings/espulp/ULP.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/alarm/__init__.c shared-bindings/busio/SPI.c +#: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "Yù qí %q" @@ -1038,7 +1042,6 @@ msgstr "gù jiàn chóng fù" msgid "Firmware is invalid" msgstr "gù jiàn wú xiào" -#: ports/espressif/common-hal/coproc/Coproc.c #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware is too big" msgstr "gù jiàn tài dà" @@ -1663,11 +1666,14 @@ msgstr "" "Jǐn zhīchí dān sè, suǒyǐn wéi 4bpp huò 8bpp yǐjí 16bpp huò gèng gāo de BMP: " "Gěi chū %d bpp" -#: ports/espressif/common-hal/alarm/coproc/CoprocAlarm.c #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one %q can be set in deep sleep." msgstr "zài shēn dù shuì mián zhōng zhǐ néng shè zhì yí gè %q." +#: ports/espressif/common-hal/espulp/ULPAlarm.c +msgid "Only one %q can be set." +msgstr "" + #: ports/espressif/common-hal/i2ctarget/I2CTarget.c #: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c msgid "Only one address is allowed" @@ -1786,6 +1792,10 @@ msgstr "" "duōzì jié. Rúguǒ wúfǎ bìmiǎn, qǐng jiāng allow_inefficient = True chuándì " "gěigòuzào hánshù" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Pins 21+ not supported from ULP" +msgstr "" + #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "yǐn jiǎo bì xū shì lián xù de" @@ -1832,6 +1842,10 @@ msgstr "chéng xù zài bù jiā zǎi Osr de qíng kuàng xià zhí xíng OUT" msgid "Program size invalid" msgstr "chéng xù dà xiǎo wú xiào" +#: ports/espressif/common-hal/espulp/ULP.c +msgid "Program too long" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Fāngxiàng shūchū shí Pull méiyǒu shǐyòng." @@ -1976,7 +1990,7 @@ msgstr "bù zhī chí dà xiǎo" msgid "Sleep Memory not available" msgstr "shuì mián jì yì bù kě yòng" -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Qiēpiàn hé zhí bùtóng chángdù." @@ -2261,9 +2275,9 @@ msgstr "Wúfǎ dúqǔ tiáosèbǎn shùjù" msgid "Unable to start mDNS query" msgstr "wú fǎ qǐ dòng mDNS chá xún" -#: shared-bindings/coproc/CoprocMemory.c -msgid "Unable to write" -msgstr "wú fǎ xiě rù" +#: shared-bindings/memorymap/AddressRange.c +msgid "Unable to write to address." +msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." @@ -2528,7 +2542,7 @@ msgid "array has too many dimensions" msgstr "shùzǔ yǒu tài duō wéidù" #: py/objarray.c shared-bindings/alarm/SleepMemory.c -#: shared-bindings/coproc/CoprocMemory.c shared-bindings/nvm/ByteArray.c +#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "yòu cè xūyào shùzǔ/zì jié" @@ -3795,7 +3809,7 @@ msgid "only sample_rate=16000 is supported" msgstr "Jǐn zhīchí cǎiyàng lǜ = 16000" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c -#: shared-bindings/alarm/SleepMemory.c shared-bindings/coproc/CoprocMemory.c +#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "jǐn zhīchí bù zhǎng = 1(jí wú) de qiēpiàn" @@ -4395,6 +4409,9 @@ msgstr "zi bìxū wèi fú diǎn xíng" msgid "zi must be of shape (n_section, 2)" msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" +#~ msgid "Unable to write" +#~ msgstr "wú fǎ xiě rù" + #~ msgid "%q length must be >= 1" #~ msgstr "%q cháng dù bìxū >= 1"