Update translation files

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: CircuitPython/main
Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/

locale/ID.po

@@ -354,6 +354,7 @@ msgstr "pow() 3-arg tidak didukung"
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -634,6 +635,10 @@ msgstr "Penyangga harus memiliki panjang setidaknya 1"
 msgid "Buffer too short by %d bytes"
 msgstr "Buffer terlalu pendek untuk %d byte"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1607,6 +1612,10 @@ msgstr "Tidak ada pin TX"
 msgid "No available clocks"
 msgstr "Tidak ada clocks yang tersedia"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Tidak ada koneksi: panjang tidak dapat ditentukan"
@@ -1627,6 +1636,7 @@ msgstr "Tidak ada perangkat keras acak yang tersedia"
 msgid "No hardware support on clk pin"
 msgstr "Tidak ada dukungan perangkat keras pada pin clk"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1750,7 +1760,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1849,6 +1858,7 @@ msgstr "Periferal sedang digunakan"
 msgid "Permission denied"
 msgstr "Izin ditolak"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2209,6 +2219,10 @@ msgstr "Tingkat sampel dari sampel tidak cocok dengan mixer"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "signedness dari sampel tidak cocok dengan mixer"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3917,6 +3931,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/cs.po

@@ -350,6 +350,7 @@ msgstr ""
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -628,6 +629,10 @@ msgstr ""
 msgid "Buffer too short by %d bytes"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1590,6 +1595,10 @@ msgstr ""
 msgid "No available clocks"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr ""
@@ -1610,6 +1619,7 @@ msgstr ""
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1730,7 +1740,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1825,6 +1834,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2178,6 +2188,10 @@ msgstr ""
 msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3883,6 +3897,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/de_DE.po

@@ -356,6 +356,7 @@ msgstr "3-arg pow() wird nicht unterstützt"
 msgid "64 bit types"
 msgstr "64 bit Typen"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -636,6 +637,10 @@ msgstr "Der Puffer muss eine Mindestenslänge von 1 haben"
 msgid "Buffer too short by %d bytes"
 msgstr "Puffer um %d Bytes zu kurz"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1608,6 +1613,10 @@ msgstr "Kein TX Pin"
 msgid "No available clocks"
 msgstr "Keine Taktgeber verfügbar"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Keine Verbindung: Länge kann nicht bestimmt werden"
@@ -1628,6 +1637,7 @@ msgstr "Kein hardware random verfügbar"
 msgid "No hardware support on clk pin"
 msgstr "Keine Hardwareunterstützung am clk Pin"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1752,7 +1762,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1849,6 +1858,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Zugang verweigert"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2209,6 +2219,10 @@ msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 "Die Art des Vorzeichens des Samples stimmt nicht mit dem des Mixers überein"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3946,6 +3960,7 @@ msgstr "pow() drittes Argument darf nicht 0 sein"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() mit 3 Argumenten erfordert Integer"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/el.po

@@ -347,6 +347,7 @@ msgstr ""
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -625,6 +626,10 @@ msgstr ""
 msgid "Buffer too short by %d bytes"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1587,6 +1592,10 @@ msgstr ""
 msgid "No available clocks"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr ""
@@ -1607,6 +1616,7 @@ msgstr ""
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1727,7 +1737,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1822,6 +1831,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2175,6 +2185,10 @@ msgstr ""
 msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3880,6 +3894,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/en_GB.po

@@ -356,6 +356,7 @@ msgstr "3-arg pow() not supported"
 msgid "64 bit types"
 msgstr "64 bit types"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -636,6 +637,10 @@ msgstr "Buffer must be at least length 1"
 msgid "Buffer too short by %d bytes"
 msgstr "Buffer too short by %d bytes"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1602,6 +1607,10 @@ msgstr "No TX pin"
 msgid "No available clocks"
 msgstr "No available clocks"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "No connection: length cannot be determined"
@@ -1622,6 +1631,7 @@ msgstr "No hardware random available"
 msgid "No hardware support on clk pin"
 msgstr "No hardware support on clk pin"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1744,7 +1754,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr "Only connectable advertisements can be directed"
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr "Only edge detection is available on this hardware"
@@ -1843,6 +1852,7 @@ msgstr "Peripheral in use"
 msgid "Permission denied"
 msgstr "Permission denied"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr "Pin cannot wake from Deep Sleep"
@@ -2206,6 +2216,10 @@ msgstr "The sample's sample rate does not match the mixer's"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "The sample's signedness does not match the mixer's"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3917,6 +3931,7 @@ msgstr "pow() 3rd argument cannot be 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() with 3 arguments requires integers"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/es.po

@@ -358,6 +358,7 @@ msgstr "pow() con 3 argumentos no soportado"
 msgid "64 bit types"
 msgstr "tipos de 64 bit"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -641,6 +642,10 @@ msgstr "Buffer debe ser de longitud 1 como minimo"
 msgid "Buffer too short by %d bytes"
 msgstr "Búffer muy corto por %d bytes"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1624,6 +1629,10 @@ msgstr "Sin pin TX"
 msgid "No available clocks"
 msgstr "Relojes no disponibles"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Sin conexión: no se puede determinar la longitud"
@@ -1644,6 +1653,7 @@ msgstr "No hay hardware random disponible"
 msgid "No hardware support on clk pin"
 msgstr "Sin soporte de hardware en el pin clk"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1768,7 +1778,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr "Solo se puede dirigir a los anuncios conectables"
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr "Este hardware solo tiene capacidad para detección de borde"
@@ -1867,6 +1876,7 @@ msgstr "Periférico en uso"
 msgid "Permission denied"
 msgstr "Permiso denegado"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr "El Pin no se puede despertar de un sueño profundo"
@@ -2235,6 +2245,10 @@ msgstr "El sample rate del sample no iguala al del mixer"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "El signo del sample no iguala al del mixer"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3963,6 +3977,7 @@ msgstr "el 3er argumento de pow() no puede ser 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() con 3 argumentos requiere enteros"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/fil.po

@@ -351,6 +351,7 @@ msgstr "3-arg pow() hindi suportado"
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -632,6 +633,10 @@ msgstr "Buffer dapat ay hindi baba sa 1 na haba"
 msgid "Buffer too short by %d bytes"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1602,6 +1607,10 @@ msgstr "Walang TX pin"
 msgid "No available clocks"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr ""
@@ -1622,6 +1631,7 @@ msgstr "Walang magagamit na hardware random"
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1745,7 +1755,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1841,6 +1850,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Walang pahintulot"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2195,6 +2205,10 @@ msgstr "Ang sample rate ng sample ay hindi tugma sa mixer"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "Ang signedness ng sample hindi tugma sa mixer"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3921,6 +3935,7 @@ msgstr "pow() 3rd argument ay hindi maaring 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() na may 3 argumento kailangan ng integers"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/fr.po

@@ -358,6 +358,7 @@ msgstr "pow() non supporté avec 3 paramètres"
 msgid "64 bit types"
 msgstr "types à 64 bit"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -642,6 +643,10 @@ msgstr "Le tampon doit être de longueur au moins 1"
 msgid "Buffer too short by %d bytes"
 msgstr "Tampon trop court de %d octets"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1632,6 +1637,10 @@ msgstr "Pas de broche TX"
 msgid "No available clocks"
 msgstr "Pas d'horloge disponible"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Pas de connexion : la longueur ne peut pas être déterminée"
@@ -1652,6 +1661,7 @@ msgstr "Aucunes source de valeurs aléatoire matérielle disponible"
 msgid "No hardware support on clk pin"
 msgstr "Pas de support matériel sur la broche clk"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1776,7 +1786,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1877,6 +1886,7 @@ msgstr "Périphérique en utilisation"
 msgid "Permission denied"
 msgstr "Permission refusée"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2237,6 +2247,10 @@ msgstr "L'échantillonage de l'échantillon ne correspond pas à celui du mixer"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "Le signe de l'échantillon ne correspond pas à celui du mixer"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3973,6 +3987,7 @@ msgstr "le 3e argument de pow() ne peut être 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() avec 3 arguments nécessite des entiers"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/hi.po

@@ -347,6 +347,7 @@ msgstr ""
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -625,6 +626,10 @@ msgstr ""
 msgid "Buffer too short by %d bytes"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1587,6 +1592,10 @@ msgstr ""
 msgid "No available clocks"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr ""
@@ -1607,6 +1616,7 @@ msgstr ""
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1727,7 +1737,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1822,6 +1831,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2175,6 +2185,10 @@ msgstr ""
 msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3880,6 +3894,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/it_IT.po

@@ -358,6 +358,7 @@ msgstr "pow() con tre argmomenti non supportata"
 msgid "64 bit types"
 msgstr "Tipo 64 bits"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -640,6 +641,10 @@ msgstr "Il buffer deve essere lungo almeno 1"
 msgid "Buffer too short by %d bytes"
 msgstr "Buffer troppo piccolo di %d bytes"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1613,6 +1618,10 @@ msgstr "Nessun pin TX"
 msgid "No available clocks"
 msgstr "Nessun orologio a disposizione"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr ""
@@ -1633,6 +1642,7 @@ msgstr "Nessun generatore hardware di numeri casuali disponibile"
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1757,7 +1767,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1857,6 +1866,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Permesso negato"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2214,6 +2224,10 @@ msgstr ""
 msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3943,6 +3957,7 @@ msgstr "il terzo argomento di pow() non può essere 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() con 3 argomenti richiede interi"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/ja.po

@@ -352,6 +352,7 @@ msgstr "引数3つのpow()は非対応"
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -632,6 +633,10 @@ msgstr "バッファ長は少なくとも1以上でなければなりません"
 msgid "Buffer too short by %d bytes"
 msgstr "バッファが %d バイト足りません"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1598,6 +1603,10 @@ msgstr "TXピンがありません"
 msgid "No available clocks"
 msgstr "利用できるクロックがありません"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "接続なし: 長さが決定できません"
@@ -1618,6 +1627,7 @@ msgstr "利用可能なハードウェア乱数なし"
 msgid "No hardware support on clk pin"
 msgstr "clkピンにハードウェア対応がありません"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1740,7 +1750,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1836,6 +1845,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr "パーミッション拒否"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2189,6 +2199,10 @@ msgstr "サンプルレートがサンプルとミキサーで一致しません
 msgid "The sample's signedness does not match the mixer's"
 msgstr "符号の有無がサンプルとミキサーで一致しません"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3902,6 +3916,7 @@ msgstr "pow()の3つ目の引数は0にできません"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow()の第3引数には整数が必要"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/ko.po

@@ -348,6 +348,7 @@ msgstr ""
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -628,6 +629,10 @@ msgstr "잘못된 크기의 버퍼. >1 여야합니다"
 msgid "Buffer too short by %d bytes"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1590,6 +1595,10 @@ msgstr ""
 msgid "No available clocks"
 msgstr ""
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr ""
@@ -1610,6 +1619,7 @@ msgstr ""
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1730,7 +1740,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1825,6 +1834,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2178,6 +2188,10 @@ msgstr ""
 msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3884,6 +3898,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/nl.po

@@ -350,6 +350,7 @@ msgstr "3-arg pow() niet ondersteund"
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -630,6 +631,10 @@ msgstr "Buffer moet op zijn minst lengte 1 zijn"
 msgid "Buffer too short by %d bytes"
 msgstr "Buffer is %d bytes te klein"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1599,6 +1604,10 @@ msgstr "Geen TX pin"
 msgid "No available clocks"
 msgstr "Geen klokken beschikbaar"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Geen verbinding: lengte kan niet worden bepaald"
@@ -1619,6 +1628,7 @@ msgstr "Geen hardware random beschikbaar"
 msgid "No hardware support on clk pin"
 msgstr "Geen hardware ondersteuning beschikbaar op clk pin"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1743,7 +1753,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1843,6 +1852,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Toegang geweigerd"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2201,6 +2211,10 @@ msgstr "De sample's sample rate komt niet overeen met die van de mixer"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "De sample's signature komt niet overeen met die van de mixer"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3921,6 +3935,7 @@ msgstr "derde argument van pow() mag geen 0 zijn"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() met 3 argumenten vereist integers"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/pl.po

@@ -352,6 +352,7 @@ msgstr "3-argumentowy pow() jest niewspierany"
 msgid "64 bit types"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -632,6 +633,10 @@ msgstr "Bufor musi mieć długość 1 lub więcej"
 msgid "Buffer too short by %d bytes"
 msgstr "Bufor za krótki o %d bajtów"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1598,6 +1603,10 @@ msgstr "Brak nóżki TX"
 msgid "No available clocks"
 msgstr "Brak wolnych zegarów"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Brak połączenia: nie można ustalić długości"
@@ -1618,6 +1627,7 @@ msgstr "Brak generatora liczb losowych"
 msgid "No hardware support on clk pin"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1738,7 +1748,6 @@ msgstr "Wspierane są tylko nieskompresowane pliki BMP: wielkość nagłówka %d
 msgid "Only connectable advertisements can be directed"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr ""
@@ -1833,6 +1842,7 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Odmowa dostępu"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr ""
@@ -2186,6 +2196,10 @@ msgstr "Sample rate nie pasuje do miksera"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "Znak nie pasuje do miksera"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3893,6 +3907,7 @@ msgstr "trzeci argument pow() nie może być 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/pt_BR.po

@@ -360,6 +360,7 @@ msgstr "3-arg pow() não compatível"
 msgid "64 bit types"
 msgstr "Tipos 64 bit"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -645,6 +646,10 @@ msgstr "O comprimento do buffer deve ter pelo menos 1"
 msgid "Buffer too short by %d bytes"
 msgstr "O buffer é muito curto em %d bytes"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1623,6 +1628,10 @@ msgstr "Nenhum pino TX"
 msgid "No available clocks"
 msgstr "Nenhum clock disponível"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Sem conexão: o comprimento não pode ser determinado"
@@ -1643,6 +1652,7 @@ msgstr "Nenhum hardware aleatório está disponível"
 msgid "No hardware support on clk pin"
 msgstr "Sem suporte de hardware no pino de clock"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1768,7 +1778,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr "Somente anúncios conectáveis podem ser direcionados"
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr "Apenas a detecção de borda está disponível neste hardware"
@@ -1869,6 +1878,7 @@ msgstr "O periférico está em uso"
 msgid "Permission denied"
 msgstr "Permissão negada"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr "O pinto não pode acordar do deep sleep"
@@ -2240,6 +2250,10 @@ msgstr "A taxa de amostragem da amostra não coincide com a do mixer"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "A amostragem \"signedness\" não coincide com a do mixer"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3983,6 +3997,7 @@ msgstr "O terceiro argumento pow() não pode ser 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "o pow() com 3 argumentos requer números inteiros"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/sv.po

@@ -355,6 +355,7 @@ msgstr "3-arguments pow() stöds inte"
 msgid "64 bit types"
 msgstr "64-bitars typer"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -635,6 +636,10 @@ msgstr "Bufferten måste ha minst längd 1"
 msgid "Buffer too short by %d bytes"
 msgstr "Buffert är %d bytes för kort"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1607,6 +1612,10 @@ msgstr "Ingen TX-pinne"
 msgid "No available clocks"
 msgstr "Inga tillgängliga klockor"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Ingen anslutning: längden kan inte bestämmas"
@@ -1627,6 +1636,7 @@ msgstr "Ingen hårdvaru-random tillgänglig"
 msgid "No hardware support on clk pin"
 msgstr "Inget hårdvarustöd på clk-pinne"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1750,7 +1760,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr "Endast anslutningsbara annonseringar kan dirigeras"
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr "Endast kantdetektering är tillgänglig för denna hårdvara"
@@ -1849,6 +1858,7 @@ msgstr "Periferi i bruk"
 msgid "Permission denied"
 msgstr "Åtkomst nekad"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr "Pinnen kan inte väcka från djup sömn"
@@ -2215,6 +2225,10 @@ msgstr "Samplingens frekvens matchar inte mixerns"
 msgid "The sample's signedness does not match the mixer's"
 msgstr "Samplingens signerad/osignerad stämmer inte med mixern"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3941,6 +3955,7 @@ msgstr "pow() 3: e argument kan inte vara 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() med 3 argument kräver heltal"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

locale/zh_Latn_pinyin.po

@@ -357,6 +357,7 @@ msgstr "bù zhīchí 3-arg pow()"
 msgid "64 bit types"
 msgstr "64 wèi lèi xíng"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "A hardware interrupt channel is already in use"
@@ -637,6 +638,10 @@ msgstr "Huǎnchōng qū bìxū zhìshǎo chángdù 1"
 msgid "Buffer too short by %d bytes"
 msgstr "Huǎn chōng qū tài duǎn , àn %d zì jié"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "Buffers must be same size"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
 #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
 #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
@@ -1610,6 +1615,10 @@ msgstr "Wèi zhǎodào TX yǐn jiǎo"
 msgid "No available clocks"
 msgstr "Méiyǒu kěyòng de shízhōng"
 
+#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
+msgid "No capture in progress"
+msgstr ""
+
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
 msgstr "Wú liánjiē: Wúfǎ quèdìng chángdù"
@@ -1630,6 +1639,7 @@ msgstr "Méiyǒu kěyòng de yìngjiàn suíjī"
 msgid "No hardware support on clk pin"
 msgstr "Shízhōng yǐn jiǎo wú yìngjiàn zhīchí"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "No hardware support on pin"
@@ -1753,7 +1763,6 @@ msgstr ""
 msgid "Only connectable advertisements can be directed"
 msgstr "zhǐ yǒu kě lián jiē de guǎng gào cái néng bèi yǐn dǎo"
 
-#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Only edge detection is available on this hardware"
 msgstr "cǐ yìng jiàn shàng jǐn tí gòng biān yuán jiǎn cè"
@@ -1851,6 +1860,7 @@ msgstr "shǐ yòng zhōng de wài shè"
 msgid "Permission denied"
 msgstr "Quánxiàn bèi jùjué"
 
+#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
 #: ports/stm/common-hal/alarm/pin/PinAlarm.c
 msgid "Pin cannot wake from Deep Sleep"
 msgstr "yǐn jiǎo wú fǎ cóng shēn dù shuì mián zhōng huàn xǐng"
@@ -2216,6 +2226,10 @@ msgstr "Yàngběn de yàngběn sùdù yǔ hǔn yīn qì de xiāngchà bù pǐpè
 msgid "The sample's signedness does not match the mixer's"
 msgstr "Yàngběn de qiānmíng yǔ hǔn yīn qì de qiānmíng bù pǐpèi"
 
+#: shared-module/imagecapture/ParallelImageCapture.c
+msgid "This microcontroller does not support continuous capture."
+msgstr ""
+
 #: shared-module/paralleldisplay/ParallelBus.c
 msgid ""
 "This microcontroller only supports data0=, not data_pins=, because it "
@@ -3940,6 +3954,7 @@ msgstr "pow() 3 cān shǔ bùnéng wéi 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
 
+#: ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
 #: ports/espressif/boards/adafruit_funhouse/mpconfigboard.h