djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mimxrt: Add MIMXRT1010 board.

This commit is contained in:
Jim Mussared 2020-01-30 14:40:34 +11:00 committed by Damien George
parent f46782dde9
commit 7eea0d8b6c
6 changed files with 343 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ports/mimxrt/README.md
View File

@ -1,7 +1,7 @@
Port of MicroPython to NXP iMX RT 10xx Port of MicroPython to NXP iMX RT 10xx
====================================== ======================================
Currently supports Teensy 4.0. Currently supports Teensy 4.0 and the i.MX RT1010 EVK board.
Features: Features:
- REPL over USB VCP - REPL over USB VCP

269
ports/mimxrt/boards/MIMXRT1010_EVK/evkmimxrt1010_flexspi_nor_config.h Normal file
View File

@ -0,0 +1,269 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.h
#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_120MHz = 7,
kFlexSpiSerialClk_133MHz = 8,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0
#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1
#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3
#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4
#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5
#define NOR_CMD_INDEX_DUMMY 6 //!< 6
#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7
#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */

50
ports/mimxrt/boards/MIMXRT1010_EVK/flash_config.c Normal file
View File

@ -0,0 +1,50 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// Based on tinyusb/hw/bsp/teensy_40/evkmimxrt1010_flexspi_nor_config.c
#include "evkmimxrt1010_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = 16u * 1024u * 1024u,
.lookupTable =
{
// Read LUTs
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

8
ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.h Normal file
View File

@ -0,0 +1,8 @@
#define MICROPY_HW_BOARD_NAME "i.MX RT1010 EVK"
#define MICROPY_HW_MCU_NAME "MIMXRT1011DAE5A"
#define BOARD_FLASH_SIZE (16 * 1024 * 1024)
#define MICROPY_HW_LED_PINMUX IOMUXC_GPIO_11_GPIOMUX_IO11
#define MICROPY_HW_LED_PORT GPIO1
#define MICROPY_HW_LED_PIN 11

7
ports/mimxrt/boards/MIMXRT1010_EVK/mpconfigboard.mk Normal file
View File

@ -0,0 +1,7 @@
MCU_SERIES = MIMXRT1011
MCU_VARIANT = MIMXRT1011DAE5A
JLINK_PATH = /media/RT1010-EVK/
deploy: $(BUILD)/firmware.bin
cp $< $(JLINK_PATH)

8
ports/mimxrt/boards/MIMXRT1011.ld Normal file
View File

@ -0,0 +1,8 @@
/* 24kiB stack. */
__stack_size__ = 0x6000;
_estack = __StackTop;
_sstack = __StackLimit;
/* Use second OCRAM bank for GC heap. */
_gc_heap_start = ORIGIN(m_data2);
_gc_heap_end = ORIGIN(m_data2) + LENGTH(m_data2);