all: Make use of $(TOP) variable in Makefiles, instead of "..".
$(TOP) is defined in py/mkenv.mk and should be used to refer to the top level of this repository.
This commit is contained in:
Damien George
parent
f9dfd8aa3b
commit
7d4a2f773c
|
|
@ -4,12 +4,12 @@ include ../py/mkenv.mk
|
|||
QSTR_DEFS = qstrdefsport.h
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
CROSS_COMPILE = arm-none-eabi-
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
|
||||
CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mabi=aapcs-linux -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fsingle-precision-constant -Wdouble-promotion
|
||||
|
|
@ -45,4 +45,4 @@ $(BUILD)/firmware.elf: $(OBJ)
|
|||
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
|
||||
$(Q)$(SIZE) $@
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ ifeq ($(BTARGET), application)
|
|||
# qstr definitions (must come before including py.mk)
|
||||
QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h
|
||||
# include MicroPython make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
include application.mk
|
||||
else
|
||||
ifeq ($(BTARGET), bootloader)
|
||||
|
|
@ -45,7 +45,7 @@ endif
|
|||
endif
|
||||
|
||||
# always include MicroPython make rules
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
||||
erase:
|
||||
cc3200tool -p $(PORT) format_flash --size $(FLASH_SIZE_$(BOARD))
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
APP_INC = -I.
|
||||
APP_INC += -I..
|
||||
APP_INC += -I$(TOP)
|
||||
APP_INC += -Ifatfs/src
|
||||
APP_INC += -Ifatfs/src/drivers
|
||||
APP_INC += -IFreeRTOS
|
||||
|
|
@ -10,7 +10,7 @@ APP_INC += -Ihal
|
|||
APP_INC += -Ihal/inc
|
||||
APP_INC += -Imisc
|
||||
APP_INC += -Imods
|
||||
APP_INC += -I../drivers/cc3100/inc
|
||||
APP_INC += -I$(TOP)/drivers/cc3100/inc
|
||||
APP_INC += -Isimplelink
|
||||
APP_INC += -Isimplelink/oslib
|
||||
APP_INC += -Itelnet
|
||||
|
|
@ -18,7 +18,7 @@ APP_INC += -Iutil
|
|||
APP_INC += -Ibootmgr
|
||||
APP_INC += -I$(BUILD)
|
||||
APP_INC += -I$(BUILD)/genhdr
|
||||
APP_INC += -I../stmhal
|
||||
APP_INC += -I$(TOP)/stmhal
|
||||
|
||||
APP_CPPDEFINES = -Dgcc -DTARGET_IS_CC3200 -DSL_FULL -DUSE_FREERTOS
|
||||
|
||||
|
|
|
|||
|
|
@ -4,13 +4,13 @@ BOOT_INC = -Ibootmgr
|
|||
BOOT_INC += -Ibootmgr/sl
|
||||
BOOT_INC += -Ihal
|
||||
BOOT_INC += -Ihal/inc
|
||||
BOOT_INC += -I../drivers/cc3100/inc
|
||||
BOOT_INC += -I$(TOP)/drivers/cc3100/inc
|
||||
BOOT_INC += -Imisc
|
||||
BOOT_INC += -Imods
|
||||
BOOT_INC += -Isimplelink
|
||||
BOOT_INC += -Isimplelink/oslib
|
||||
BOOT_INC += -Iutil
|
||||
BOOT_INC += -I..
|
||||
BOOT_INC += -I$(TOP)
|
||||
BOOT_INC += -I.
|
||||
BOOT_INC += -I$(BUILD)
|
||||
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@ FROZEN_DIR ?= scripts
|
|||
FROZEN_MPY_DIR ?= modules
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
FWBIN = $(BUILD)/firmware-combined.bin
|
||||
PORT ?= /dev/ttyACM0
|
||||
|
|
@ -23,7 +23,7 @@ CROSS_COMPILE = xtensa-lx106-elf-
|
|||
ESP_SDK = $(shell $(CC) -print-sysroot)/usr
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
INC += -I$(ESP_SDK)/include
|
||||
|
||||
|
|
@ -220,16 +220,16 @@ ota:
|
|||
#$(BUILD)/pins_$(BOARD).o: $(BUILD)/pins_$(BOARD).c
|
||||
# $(call compile_c)
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
||||
axtls: $(BUILD)/libaxtls.a
|
||||
|
||||
$(BUILD)/libaxtls.a:
|
||||
cd ../lib/axtls; cp config/upyconfig config/.config
|
||||
cd ../lib/axtls; $(MAKE) oldconfig -B
|
||||
cd ../lib/axtls; $(MAKE) clean
|
||||
cd ../lib/axtls; $(MAKE) all CC="$(CC)" LD="$(LD)" AR="$(AR)" CFLAGS_EXTRA="$(CFLAGS_XTENSA) -Dabort=abort_ -DRT_MAX_PLAIN_LENGTH=1024 -DRT_EXTRA=4096"
|
||||
cp ../lib/axtls/_stage/libaxtls.a $@
|
||||
cd $(TOP)/lib/axtls; cp config/upyconfig config/.config
|
||||
cd $(TOP)/lib/axtls; $(MAKE) oldconfig -B
|
||||
cd $(TOP)/lib/axtls; $(MAKE) clean
|
||||
cd $(TOP)/lib/axtls; $(MAKE) all CC="$(CC)" LD="$(LD)" AR="$(AR)" CFLAGS_EXTRA="$(CFLAGS_XTENSA) -Dabort=abort_ -DRT_MAX_PLAIN_LENGTH=1024 -DRT_EXTRA=4096"
|
||||
cp $(TOP)/lib/axtls/_stage/libaxtls.a $@
|
||||
|
||||
clean-modules:
|
||||
git clean -f -d modules
|
||||
|
|
|
|||
|
|
@ -6,19 +6,19 @@ CROSS = 0
|
|||
QSTR_DEFS = qstrdefsport.h
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
ifeq ($(CROSS), 1)
|
||||
CROSS_COMPILE = arm-none-eabi-
|
||||
endif
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
|
||||
ifeq ($(CROSS), 1)
|
||||
DFU = ../tools/dfu.py
|
||||
PYDFU = ../tools/pydfu.py
|
||||
DFU = $(TOP)/tools/dfu.py
|
||||
PYDFU = $(TOP)/tools/pydfu.py
|
||||
CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mabi=aapcs-linux -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fsingle-precision-constant -Wdouble-promotion
|
||||
CFLAGS = $(INC) -Wall -Werror -std=c99 -nostdlib $(CFLAGS_CORTEX_M4) $(COPT)
|
||||
LDFLAGS = -nostdlib -T stm32f405.ld -Map=$@.map --cref --gc-sections
|
||||
|
|
@ -57,7 +57,7 @@ endif
|
|||
|
||||
$(BUILD)/_frozen_mpy.c: frozentest.mpy $(BUILD)/genhdr/qstrdefs.generated.h
|
||||
$(ECHO) "MISC freezing bytecode"
|
||||
$(Q)../tools/mpy-tool.py -f -q $(BUILD)/genhdr/qstrdefs.preprocessed.h -mlongint-impl=none $< > $@
|
||||
$(Q)$(TOP)/tools/mpy-tool.py -f -q $(BUILD)/genhdr/qstrdefs.preprocessed.h -mlongint-impl=none $< > $@
|
||||
|
||||
$(BUILD)/firmware.elf: $(OBJ)
|
||||
$(ECHO) "LINK $@"
|
||||
|
|
@ -87,4 +87,4 @@ run:
|
|||
test: $(BUILD)/firmware.elf
|
||||
$(Q)/bin/echo -e "print('hello world!', list(x+1 for x in range(10)), end='eol\\\\n')\\r\\n\\x04" | $(BUILD)/firmware.elf | tail -n2 | grep "^hello world! \\[1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\]eol"
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
|
|
|||
|
|
@ -23,10 +23,10 @@ QSTR_DEFS = qstrdefsport.h
|
|||
UNAME_S := $(shell uname -s)
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
|
||||
# compiler settings
|
||||
|
|
@ -71,4 +71,4 @@ endif
|
|||
OBJ = $(PY_O)
|
||||
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@ include ../py/mkenv.mk
|
|||
QSTR_DEFS = qstrdefsport.h
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
XC16 = /opt/microchip/xc16/v1.24
|
||||
CROSS_COMPILE = $(XC16)/bin/xc16-
|
||||
|
|
@ -13,7 +13,7 @@ PARTFAMILY = dsPIC33F
|
|||
PART = 33FJ256GP506
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
INC += -I$(XC16)/include
|
||||
INC += -I$(XC16)/support/$(PARTFAMILY)/h
|
||||
|
|
@ -67,4 +67,4 @@ $(BUILD)/firmware.elf: $(OBJ)
|
|||
$(PY_BUILD)/gc.o: CFLAGS += -O1
|
||||
$(PY_BUILD)/vm.o: CFLAGS += -O1
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
|
|
|||
10
py/py.mk
10
py/py.mk
|
|
@ -22,13 +22,13 @@ CFLAGS_MOD += -DFFCONF_H=\"lib/oofatfs/ffconf.h\"
|
|||
ifeq ($(MICROPY_PY_USSL),1)
|
||||
CFLAGS_MOD += -DMICROPY_PY_USSL=1
|
||||
ifeq ($(MICROPY_SSL_AXTLS),1)
|
||||
CFLAGS_MOD += -DMICROPY_SSL_AXTLS=1 -I../lib/axtls/ssl -I../lib/axtls/crypto -I../lib/axtls/config
|
||||
CFLAGS_MOD += -DMICROPY_SSL_AXTLS=1 -I$(TOP)/lib/axtls/ssl -I$(TOP)/lib/axtls/crypto -I$(TOP)/lib/axtls/config
|
||||
LDFLAGS_MOD += -Lbuild -laxtls
|
||||
else ifeq ($(MICROPY_SSL_MBEDTLS),1)
|
||||
# Can be overridden by ports which have "builtin" mbedTLS
|
||||
MICROPY_SSL_MBEDTLS_INCLUDE ?= ../lib/mbedtls/include
|
||||
MICROPY_SSL_MBEDTLS_INCLUDE ?= $(TOP)/lib/mbedtls/include
|
||||
CFLAGS_MOD += -DMICROPY_SSL_MBEDTLS=1 -I$(MICROPY_SSL_MBEDTLS_INCLUDE)
|
||||
LDFLAGS_MOD += -L../lib/mbedtls/library -lmbedx509 -lmbedtls -lmbedcrypto
|
||||
LDFLAGS_MOD += -L$(TOP)/lib/mbedtls/library -lmbedx509 -lmbedtls -lmbedcrypto
|
||||
endif
|
||||
endif
|
||||
|
||||
|
|
@ -38,7 +38,7 @@ endif
|
|||
|
||||
ifeq ($(MICROPY_PY_LWIP),1)
|
||||
LWIP_DIR = lib/lwip/src
|
||||
INC += -I../lib/lwip/src/include -I../lib/lwip/src/include/ipv4 -I../extmod/lwip-include
|
||||
INC += -I$(TOP)/lib/lwip/src/include -I$(TOP)/lib/lwip/src/include/ipv4 -I$(TOP)/extmod/lwip-include
|
||||
CFLAGS_MOD += -DMICROPY_PY_LWIP=1
|
||||
SRC_MOD += extmod/modlwip.c lib/netutils/netutils.c
|
||||
SRC_MOD += $(addprefix $(LWIP_DIR)/,\
|
||||
|
|
@ -75,7 +75,7 @@ endif
|
|||
ifeq ($(MICROPY_PY_BTREE),1)
|
||||
BTREE_DIR = lib/berkeley-db-1.xx
|
||||
BTREE_DEFS = -D__DBINTERFACE_PRIVATE=1 -Dmpool_error=printf -Dabort=abort_ -Dvirt_fd_t=mp_obj_t "-DVIRT_FD_T_HEADER=<py/obj.h>"
|
||||
INC += -I../$(BTREE_DIR)/PORT/include
|
||||
INC += -I$(TOP)/$(BTREE_DIR)/PORT/include
|
||||
SRC_MOD += extmod/modbtree.c
|
||||
SRC_MOD += $(addprefix $(BTREE_DIR)/,\
|
||||
btree/bt_close.c \
|
||||
|
|
|
|||
|
|
@ -5,14 +5,14 @@ include ../py/mkenv.mk
|
|||
QSTR_DEFS = qstrdefsport.h
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
CROSS_COMPILE = arm-none-eabi-
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
INC += -I../tools/tinytest/
|
||||
INC += -I$(TOP)/tools/tinytest/
|
||||
|
||||
CFLAGS_CORTEX_M3 = -mthumb -mcpu=cortex-m3 -mfloat-abi=soft
|
||||
CFLAGS = $(INC) -Wall -Wpointer-arith -Werror -std=gnu99 $(CFLAGS_CORTEX_M3) $(COPT) \
|
||||
|
|
@ -98,10 +98,10 @@ test: $(BUILD)/firmware-test.elf
|
|||
|
||||
$(BUILD)/test_main.o: $(BUILD)/genhdr/tests.h
|
||||
$(BUILD)/genhdr/tests.h:
|
||||
$(Q)echo "Generating $@";(cd ../tests; ../tools/tinytest-codegen.py) > $@
|
||||
$(Q)echo "Generating $@";(cd $(TOP)/tests; ../tools/tinytest-codegen.py) > $@
|
||||
|
||||
$(BUILD)/tinytest.o:
|
||||
$(Q)$(CC) $(CFLAGS) -DNO_FORKING -o $@ -c ../tools/tinytest/tinytest.c
|
||||
$(Q)$(CC) $(CFLAGS) -DNO_FORKING -o $@ -c $(TOP)/tools/tinytest/tinytest.c
|
||||
|
||||
## `$(LD)` doesn't seem to like `--specs` for some reason, but we can just use `$(CC)` here.
|
||||
$(BUILD)/firmware.elf: $(OBJ_COMMON) $(OBJ_RUN)
|
||||
|
|
@ -112,4 +112,4 @@ $(BUILD)/firmware-test.elf: $(OBJ_COMMON) $(OBJ_TEST)
|
|||
$(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
|
||||
$(Q)$(SIZE) $@
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
|
|
|||
|
|
@ -19,7 +19,7 @@ QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h $(BUILD)/modstm_qstr.h
|
|||
FROZEN_MPY_DIR ?= modules
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
LD_DIR=boards
|
||||
CMSIS_DIR=cmsis
|
||||
|
|
@ -27,10 +27,10 @@ HAL_DIR=hal/$(MCU_SERIES)
|
|||
USBDEV_DIR=usbdev
|
||||
#USBHOST_DIR=usbhost
|
||||
FATFS_DIR=lib/oofatfs
|
||||
DFU=../tools/dfu.py
|
||||
DFU=$(TOP)/tools/dfu.py
|
||||
# may need to prefix dfu-util with sudo
|
||||
USE_PYDFU ?= 1
|
||||
PYDFU ?= ../tools/pydfu.py
|
||||
PYDFU ?= $(TOP)/tools/pydfu.py
|
||||
DFU_UTIL ?= dfu-util
|
||||
DEVICE=0483:df11
|
||||
STFLASH ?= st-flash
|
||||
|
|
@ -40,9 +40,9 @@ OPENOCD_CONFIG ?= boards/openocd_stm32f4.cfg
|
|||
CROSS_COMPILE = arm-none-eabi-
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
INC += -I../lib/cmsis/inc
|
||||
INC += -I$(TOP)/lib/cmsis/inc
|
||||
INC += -I$(CMSIS_DIR)/
|
||||
INC += -I$(HAL_DIR)/inc
|
||||
INC += -I$(USBDEV_DIR)/core/inc -I$(USBDEV_DIR)/class/inc
|
||||
|
|
@ -406,8 +406,8 @@ GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
|
|||
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
|
||||
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
|
||||
|
||||
INSERT_USB_IDS = ../tools/insert-usb-ids.py
|
||||
FILE2H = ../tools/file2h.py
|
||||
INSERT_USB_IDS = $(TOP)/tools/insert-usb-ids.py
|
||||
FILE2H = $(TOP)/tools/file2h.py
|
||||
|
||||
USB_IDS_FILE = usb.h
|
||||
CDCINF_TEMPLATE = pybcdc.inf_template
|
||||
|
|
@ -464,4 +464,4 @@ $(GEN_CDCINF_FILE): $(CDCINF_TEMPLATE) $(INSERT_USB_IDS) $(USB_IDS_FILE) | $(HEA
|
|||
$(ECHO) "Create $@"
|
||||
$(Q)$(PYTHON) $(INSERT_USB_IDS) $(USB_IDS_FILE) $< > $@
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@ include ../py/mkenv.mk
|
|||
QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
# If you set USE_ARDUINO_TOOLCHAIN=1 then this makefile will attempt to use
|
||||
# the toolchain that comes with Teensyduino
|
||||
|
|
@ -30,8 +30,8 @@ CFLAGS_TEENSY = -DF_CPU=96000000 -DUSB_SERIAL -D__MK20DX256__
|
|||
CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mcpu=cortex-m4 -msoft-float -mfloat-abi=soft -fsingle-precision-constant -Wdouble-promotion $(CFLAGS_TEENSY)
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I../stmhal
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(TOP)/stmhal
|
||||
INC += -I$(BUILD)
|
||||
INC += -Icore
|
||||
|
||||
|
|
@ -135,7 +135,7 @@ SRC_C += \
|
|||
|
||||
OBJ += $(BUILD)/memzip-files.o
|
||||
|
||||
MAKE_MEMZIP = ../lib/memzip/make-memzip.py
|
||||
MAKE_MEMZIP = $(TOP)/lib/memzip/make-memzip.py
|
||||
ifeq ($(MEMZIP_DIR),)
|
||||
MEMZIP_DIR = memzip_files
|
||||
endif
|
||||
|
|
@ -232,4 +232,4 @@ $(BUILD)/%.pp: $(BUILD)/%.c
|
|||
$(ECHO) "PreProcess $<"
|
||||
$(Q)$(CC) $(CFLAGS) -E -Wp,-C,-dD,-dI -o $@ $<
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
|
|
|||
|
|
@ -14,10 +14,10 @@ QSTR_DEFS = qstrdefsport.h
|
|||
UNAME_S := $(shell uname -s)
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
|
||||
# compiler settings
|
||||
|
|
@ -87,7 +87,7 @@ endif
|
|||
endif
|
||||
|
||||
ifeq ($(MICROPY_USE_READLINE),1)
|
||||
INC += -I../lib/mp-readline
|
||||
INC += -I$(TOP)/lib/mp-readline
|
||||
CFLAGS_MOD += -DMICROPY_USE_READLINE=1
|
||||
LIB_SRC_C_EXTRA += mp-readline/readline.c
|
||||
endif
|
||||
|
|
@ -107,11 +107,11 @@ endif
|
|||
ifeq ($(MICROPY_PY_FFI),1)
|
||||
|
||||
ifeq ($(MICROPY_STANDALONE),1)
|
||||
LIBFFI_CFLAGS_MOD := -I$(shell ls -1d ../lib/libffi/build_dir/out/lib/libffi-*/include)
|
||||
LIBFFI_CFLAGS_MOD := -I$(shell ls -1d $(TOP)/lib/libffi/build_dir/out/lib/libffi-*/include)
|
||||
ifeq ($(MICROPY_FORCE_32BIT),1)
|
||||
LIBFFI_LDFLAGS_MOD = ../lib/libffi/build_dir/out/lib32/libffi.a
|
||||
LIBFFI_LDFLAGS_MOD = $(TOP)/lib/libffi/build_dir/out/lib32/libffi.a
|
||||
else
|
||||
LIBFFI_LDFLAGS_MOD = ../lib/libffi/build_dir/out/lib/libffi.a
|
||||
LIBFFI_LDFLAGS_MOD = $(TOP)/lib/libffi/build_dir/out/lib/libffi.a
|
||||
endif
|
||||
else
|
||||
LIBFFI_CFLAGS_MOD := $(shell pkg-config --cflags libffi)
|
||||
|
|
@ -183,13 +183,13 @@ MPY_CROSS_FLAGS += -mcache-lookup-bc
|
|||
endif
|
||||
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
||||
.PHONY: test
|
||||
|
||||
test: $(PROG) ../tests/run-tests
|
||||
test: $(PROG) $(TOP)/tests/run-tests
|
||||
$(eval DIRNAME=$(notdir $(CURDIR)))
|
||||
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/$(PROG) ./run-tests
|
||||
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/$(PROG) ./run-tests
|
||||
|
||||
# install micropython in /usr/local/bin
|
||||
TARGET = micropython
|
||||
|
|
@ -254,12 +254,12 @@ coverage:
|
|||
|
||||
coverage_test: coverage
|
||||
$(eval DIRNAME=$(notdir $(CURDIR)))
|
||||
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests
|
||||
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests -d thread
|
||||
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests --emit native
|
||||
cd ../tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests --via-mpy -d basics float
|
||||
gcov -o build-coverage/py ../py/*.c
|
||||
gcov -o build-coverage/extmod ../extmod/*.c
|
||||
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests
|
||||
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests -d thread
|
||||
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests --emit native
|
||||
cd $(TOP)/tests && MICROPY_MICROPYTHON=../$(DIRNAME)/micropython_coverage ./run-tests --via-mpy -d basics float
|
||||
gcov -o build-coverage/py $(TOP)/py/*.c
|
||||
gcov -o build-coverage/extmod $(TOP)/extmod/*.c
|
||||
|
||||
# Value of configure's --host= option (required for cross-compilation).
|
||||
# Deduce it from CROSS_COMPILE by default, but can be overridden.
|
||||
|
|
@ -274,21 +274,21 @@ deplibs: libffi axtls
|
|||
# install-exec-recursive & install-data-am targets are used to avoid building
|
||||
# docs and depending on makeinfo
|
||||
libffi:
|
||||
cd ../lib/libffi; git clean -d -x -f
|
||||
cd ../lib/libffi; ./autogen.sh
|
||||
mkdir -p ../lib/libffi/build_dir; cd ../lib/libffi/build_dir; \
|
||||
cd $(TOP)/lib/libffi; git clean -d -x -f
|
||||
cd $(TOP)/lib/libffi; ./autogen.sh
|
||||
mkdir -p $(TOP)/lib/libffi/build_dir; cd $(TOP)/lib/libffi/build_dir; \
|
||||
../configure $(CROSS_COMPILE_HOST) --prefix=$$PWD/out --disable-structs CC="$(CC)" CXX="$(CXX)" LD="$(LD)" CFLAGS="-Os -fomit-frame-pointer -fstrict-aliasing -ffast-math -fno-exceptions"; \
|
||||
$(MAKE) install-exec-recursive; $(MAKE) -C include install-data-am
|
||||
|
||||
axtls: $(BUILD)/libaxtls.a
|
||||
|
||||
$(BUILD)/libaxtls.a: ../lib/axtls/README | $(OBJ_DIRS)
|
||||
cd ../lib/axtls; cp config/upyconfig config/.config
|
||||
cd ../lib/axtls; $(MAKE) oldconfig -B
|
||||
cd ../lib/axtls; $(MAKE) clean
|
||||
cd ../lib/axtls; $(MAKE) all CC="$(CC)" LD="$(LD)"
|
||||
cp ../lib/axtls/_stage/libaxtls.a $@
|
||||
$(BUILD)/libaxtls.a: $(TOP)/lib/axtls/README | $(OBJ_DIRS)
|
||||
cd $(TOP)/lib/axtls; cp config/upyconfig config/.config
|
||||
cd $(TOP)/lib/axtls; $(MAKE) oldconfig -B
|
||||
cd $(TOP)/lib/axtls; $(MAKE) clean
|
||||
cd $(TOP)/lib/axtls; $(MAKE) all CC="$(CC)" LD="$(LD)"
|
||||
cp $(TOP)/lib/axtls/_stage/libaxtls.a $@
|
||||
|
||||
../lib/axtls/README:
|
||||
$(TOP)/lib/axtls/README:
|
||||
@echo "You cloned without --recursive, fetching submodules for you."
|
||||
(cd ..; git submodule update --init --recursive)
|
||||
(cd $(TOP); git submodule update --init --recursive)
|
||||
|
|
|
|||
|
|
@ -8,10 +8,10 @@ PROG = micropython.exe
|
|||
QSTR_DEFS = ../unix/qstrdefsport.h
|
||||
|
||||
# include py core make definitions
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
|
||||
# compiler settings
|
||||
|
|
@ -62,4 +62,4 @@ SRC_QSTR += $(SRC_C)
|
|||
# SRC_QSTR
|
||||
SRC_QSTR_AUTO_DEPS +=
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
|
|
|||
|
|
@ -27,10 +27,10 @@ include $(Z_EXPORTS)
|
|||
endif
|
||||
|
||||
include ../py/mkenv.mk
|
||||
include ../py/py.mk
|
||||
include $(TOP)/py/py.mk
|
||||
|
||||
INC += -I.
|
||||
INC += -I..
|
||||
INC += -I$(TOP)
|
||||
INC += -I$(BUILD)
|
||||
INC += -I$(ZEPHYR_BASE)/net/ip
|
||||
INC += -I$(ZEPHYR_BASE)/net/ip/contiki
|
||||
|
|
@ -59,7 +59,7 @@ OBJ = $(PY_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
|||
CFLAGS = $(KBUILD_CFLAGS) $(NOSTDINC_FLAGS) $(ZEPHYRINCLUDE) \
|
||||
-std=gnu99 -fomit-frame-pointer -DNDEBUG -DMICROPY_HEAP_SIZE=$(MICROPY_HEAP_SIZE) $(CFLAGS_EXTRA) $(INC)
|
||||
|
||||
include ../py/mkrules.mk
|
||||
include $(TOP)/py/mkrules.mk
|
||||
|
||||
# We use single target here ($(Z_EXPORTS)) for simplicity, but actually
|
||||
# number of things get generated here: 'initconfig' generates C header for
|
||||
|
|
@ -102,4 +102,4 @@ prj_$(BOARD)_merged.conf: prj_base.conf prj_$(BOARD).conf
|
|||
$(PYTHON) makeprj.py prj_base.conf prj_$(BOARD).conf $@
|
||||
|
||||
test:
|
||||
cd ../tests && ./run-tests --target minimal --device "execpty:make -C ../zephyr run BOARD=$(BOARD) QEMU_PTY=1"
|
||||
cd $(TOP)/tests && ./run-tests --target minimal --device "execpty:make -C ../zephyr run BOARD=$(BOARD) QEMU_PTY=1"
|
||||
|
|
|
|||
Loading…
Reference in New Issue