diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index c44e3ff190..d5ccfb71c8 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -274,6 +274,7 @@ jobs: - "teensy41" - "teknikio_bluebird" - "thunderpack" + - "tinkeringtech_scoutmakes_azul" - "trellis_m4_express" - "trinket_m0" - "trinket_m0_haxpress" diff --git a/ports/nrf/boards/tinkeringtech_scoutmakes_azul/README.md b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/README.md new file mode 100644 index 0000000000..614daa72cc --- /dev/null +++ b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/README.md @@ -0,0 +1,25 @@ +# Setup + +The TinkeringTech ScoutMakes Azul is a bluetooth enabled, feather format, open source platform featuring the nRF52840 from Nordic Semiconductors. The design is based on the Adafruit nRF52840 feather express and uses the Raytac MDBT50Q-1MV2 module. + +Schematic, datasheet, pin mapping etc. can be found over [here](https://tinkeringtech.com/scoutmakes-azul). + +features: +- ARM Cortex M4F (with HW floating point acceleration) running at 64MHz +- Raytac MDBT50Q-1MV2 BLE module. FCC / IC / TELEC certified module +- 1MB flash and 256KB SRAM +- Native Open Source USB stack – pre-programmed with UF2 bootloader and CircuitPython +- 128×32 OLED display +- USB type-C +- On/off power switch +- Bluetooth Low Energy compatible 2.4GHz radio (Details available in the nRF52840 product specification) +- BT5.1 & BT5 Bluetooth Specification Certified +- Supports BT5 Long Range Feature +- 1.7v to 3.3v operation with internal linear and DC/DC voltage regulators +- 21 GPIO, 6 x 12-bit ADC pins, up to 12 PWM outputs (3 PWM modules with 4 outputs each) +- Pin #3 red LED for general purpose blinking, +- Programmable NeoPixel for colorful feedback +- 4 mounting holes +- Reset button +- Works out of the box with Adafruit feather wings. +- Open source design. diff --git a/ports/nrf/boards/tinkeringtech_scoutmakes_azul/board.c b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/board.c new file mode 100644 index 0000000000..4421970eef --- /dev/null +++ b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/nrf/boards/tinkeringtech_scoutmakes_azul/mpconfigboard.h b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/mpconfigboard.h new file mode 100644 index 0000000000..2d66633942 --- /dev/null +++ b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/mpconfigboard.h @@ -0,0 +1,63 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Glenn Ruben Bakke + * Copyright (c) 2018 Dan Halbert for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "nrfx/hal/nrf_gpio.h" + +#define MICROPY_HW_BOARD_NAME "TinkeringTech ScoutMakes Azul" +#define MICROPY_HW_MCU_NAME "nRF52840" + +#define MICROPY_HW_NEOPIXEL (&pin_P0_16) + +#define MICROPY_HW_LED_STATUS (&pin_P1_15) + +#if QSPI_FLASH_FILESYSTEM +#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 17) +#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 22) +#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 23) +#define MICROPY_QSPI_DATA3 NRF_GPIO_PIN_MAP(0, 21) +#define MICROPY_QSPI_SCK NRF_GPIO_PIN_MAP(0, 19) +#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 20) +#endif + +#if SPI_FLASH_FILESYSTEM +#define SPI_FLASH_MOSI_PIN &pin_P0_17 +#define SPI_FLASH_MISO_PIN &pin_P0_22 +#define SPI_FLASH_SCK_PIN &pin_P0_19 +#define SPI_FLASH_CS_PIN &pin_P0_20 +#endif + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_P0_11) +#define DEFAULT_I2C_BUS_SDA (&pin_P0_12) + +#define DEFAULT_SPI_BUS_SCK (&pin_P0_14) +#define DEFAULT_SPI_BUS_MOSI (&pin_P0_13) +#define DEFAULT_SPI_BUS_MISO (&pin_P0_15) + +#define DEFAULT_UART_BUS_RX (&pin_P0_24) +#define DEFAULT_UART_BUS_TX (&pin_P0_25) diff --git a/ports/nrf/boards/tinkeringtech_scoutmakes_azul/mpconfigboard.mk b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/mpconfigboard.mk new file mode 100644 index 0000000000..e8bd636ad9 --- /dev/null +++ b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/mpconfigboard.mk @@ -0,0 +1,10 @@ +USB_VID = 0x239A +USB_PID = 0x80BE +USB_PRODUCT = "TinkeringTech ScoutMakes Azul" +USB_MANUFACTURER = "TinkeringTech LLC" + +MCU_CHIP = nrf52840 + +QSPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = "GD25Q16C" diff --git a/ports/nrf/boards/tinkeringtech_scoutmakes_azul/pins.c b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/pins.c new file mode 100644 index 0000000000..ec2689ab45 --- /dev/null +++ b/ports/nrf/boards/tinkeringtech_scoutmakes_azul/pins.c @@ -0,0 +1,53 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_P0_04) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_P0_05) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_P0_30) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_P0_28) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_P0_02) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_P0_03) }, + + { MP_ROM_QSTR(MP_QSTR_AREF), MP_ROM_PTR(&pin_P0_31) }, + + { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_P0_29) }, + { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_P0_29) }, + + { MP_ROM_QSTR(MP_QSTR_SWITCH), MP_ROM_PTR(&pin_P1_02) }, + + { MP_ROM_QSTR(MP_QSTR_NFC1), MP_ROM_PTR(&pin_P0_09) }, + { MP_ROM_QSTR(MP_QSTR_NFC2), MP_ROM_PTR(&pin_P0_10) }, + + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_P0_10) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_P1_08) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_P0_07) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_P0_26) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_P0_27) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_P0_06) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_P0_08) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_P1_09) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_P0_16) }, + + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_P0_14) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_P0_13) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_P0_15) }, + + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_P0_25) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_P0_24) }, + + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_11) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_12) }, + + { MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_P1_15) }, + { MP_ROM_QSTR(MP_QSTR_RED_LED), MP_ROM_PTR(&pin_P1_15) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_P1_15) }, + + { MP_ROM_QSTR(MP_QSTR_BLUE_LED), MP_ROM_PTR(&pin_P1_10) }, + + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, +}; + +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);