Parameterize linker script
This commit is contained in:
Dan Halbert
parent
be8136dc6d
commit
7b79ac3739
2
main.c
2
main.c
|
|
@ -199,7 +199,7 @@ void cleanup_after_vm(supervisor_allocation* heap) {
|
|||
|
||||
bool run_code_py(safe_mode_t safe_mode) {
|
||||
bool serial_connected_at_start = serial_connected();
|
||||
#ifdef CIRCUITPY_AUTORELOAD_DELAY_MS
|
||||
#if CIRCUITPY_AUTORELOAD_DELAY_MS > 0
|
||||
if (serial_connected_at_start) {
|
||||
serial_write("\n");
|
||||
if (autoreload_is_enabled()) {
|
||||
|
|
|
|||
|
|
@ -292,12 +292,17 @@ SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE))
|
|||
$(addprefix shared-module/, $(SRC_SHARED_MODULE)) \
|
||||
$(addprefix shared-module/, $(SRC_SHARED_MODULE_INTERNAL))
|
||||
|
||||
# There may be duplicates between SRC_COMMON_HAL_EXPANDED and SRC_SHARED_MODULE_EXPANDED,
|
||||
# because a few modules have files both in common-hal/ and shared-modules/.
|
||||
# Doing a $(sort ...) removes duplicates as part of sorting.
|
||||
SRC_COMMON_HAL_SHARED_MODULE_EXPANDED = $(sort $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED))
|
||||
|
||||
|
||||
SRC_S = supervisor/$(CHIP_FAMILY)_cpu.s
|
||||
|
||||
OBJ = $(PY_O) $(SUPERVISOR_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
||||
OBJ += $(addprefix $(BUILD)/, $(SRC_ASF:.c=.o))
|
||||
OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_EXPANDED:.c=.o))
|
||||
OBJ += $(addprefix $(BUILD)/, $(SRC_SHARED_MODULE_EXPANDED:.c=.o))
|
||||
OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_SHARED_MODULE_EXPANDED:.c=.o))
|
||||
ifeq ($(INTERNAL_LIBM),1)
|
||||
OBJ += $(addprefix $(BUILD)/, $(SRC_LIBM:.c=.o))
|
||||
endif
|
||||
|
|
@ -310,9 +315,18 @@ SRC_QSTR_PREPROCESSOR += peripherals/samd/$(CHIP_FAMILY)/clocks.c
|
|||
|
||||
all: $(BUILD)/firmware.bin $(BUILD)/firmware.uf2
|
||||
|
||||
$(BUILD)/firmware.elf: $(OBJ)
|
||||
LD_FILE = $(BUILD)/$(notdir $(patsubst %.template.ld,%.ld,$(LD_TEMPLATE_FILE)))
|
||||
|
||||
# ld_defines.pp is generated from ld_defines.c. See py/mkrules.mk.
|
||||
# Run gen_ld_files.py over ALL *.template.ld files, not just LD_TEMPLATE_FILE,
|
||||
# because it may include other template files.
|
||||
$(LD_FILE): $(BUILD)/ld_defines.pp boards/*.template.ld
|
||||
$(STEPECHO) "GEN $@"
|
||||
$(Q)$(PYTHON3) $(TOP)/tools/gen_ld_files.py --defines $< --out_dir $(BUILD) boards/*.template.ld
|
||||
|
||||
$(BUILD)/firmware.elf: $(OBJ) $(LD_FILE)
|
||||
$(STEPECHO) "LINK $@"
|
||||
$(Q)$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group
|
||||
$(Q)$(CC) -o $@ $(LDFLAGS) $(OBJ) -Wl,--start-group $(LIBS) -Wl,--end-group
|
||||
$(Q)$(SIZE) $@ | $(PYTHON3) $(TOP)/tools/build_memory_info.py $(LD_FILE)
|
||||
|
||||
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
|
||||
|
|
|
|||
|
|
@ -7,10 +7,6 @@
|
|||
|
||||
#define MICROPY_HW_LED_STATUS (&pin_PB23)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA09)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA08)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x2341
|
||||
USB_PID = 0x8053
|
||||
USB_PRODUCT = "Arduino MKR1300"
|
||||
|
|
|
|||
|
|
@ -5,10 +5,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA09)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA08)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8050
|
||||
USB_PRODUCT = "Arduino MKRZero"
|
||||
|
|
|
|||
|
|
@ -10,10 +10,6 @@
|
|||
#define MICROPY_PORT_B (PORT_PB03)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x2341
|
||||
USB_PID = 0x824D
|
||||
USB_PRODUCT = "Arduino Zero"
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
// No microcontroller.nvm
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 0
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA08)
|
||||
|
|
@ -17,8 +18,6 @@
|
|||
#define DEFAULT_UART_BUS_RX (&pin_PA01)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_PA00)
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000)
|
||||
|
||||
#define IGNORE_PIN_PA03 1
|
||||
#define IGNORE_PIN_PA12 1
|
||||
#define IGNORE_PIN_PA13 1
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x1209
|
||||
USB_PID = 0xBAB3
|
||||
USB_PRODUCT = "Bast Pro Mini M0"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,6 @@
|
|||
|
||||
#define CIRCUITPY_MCU_FAMILY samd51
|
||||
|
||||
|
||||
#define MICROPY_HW_LED_STATUS (&pin_PA22)
|
||||
|
||||
// These are pins not to reset.
|
||||
|
|
@ -14,14 +13,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x04D8
|
||||
USB_PID = 0xEDB3
|
||||
USB_PRODUCT = "Programmable USB Hub"
|
||||
|
|
|
|||
|
|
@ -7,14 +7,10 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_PA19)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_PA18)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_PA22)
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define IGNORE_PIN_PA00 1
|
||||
#define IGNORE_PIN_PA01 1
|
||||
#define IGNORE_PIN_PA02 1
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x1209
|
||||
USB_PID = 0xBAB2
|
||||
USB_PRODUCT = "CatWAN USBStick"
|
||||
|
|
|
|||
|
|
@ -22,12 +22,6 @@
|
|||
|
||||
#define SPEAKER_ENABLE_PIN (&pin_PA30)
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define CALIBRATE_CRYSTALLESS 1
|
||||
|
||||
// Explanation of how a user got into safe mode.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8019
|
||||
USB_PRODUCT = "CircuitPlayground Express"
|
||||
|
|
|
|||
|
|
@ -22,12 +22,6 @@
|
|||
|
||||
#define SPEAKER_ENABLE_PIN (&pin_PA30)
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define CALIBRATE_CRYSTALLESS 1
|
||||
|
||||
// Explanation of how a user got into safe mode.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8019
|
||||
USB_PRODUCT = "CircuitPlayground Express with Crickit libraries"
|
||||
|
|
|
|||
|
|
@ -22,12 +22,6 @@
|
|||
|
||||
#define SPEAKER_ENABLE_PIN (&pin_PA30)
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define CALIBRATE_CRYSTALLESS 1
|
||||
|
||||
// Explanation of how a user got into safe mode.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8019
|
||||
USB_PRODUCT = "CircuitPlayground Express with displayio"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,89 @@
|
|||
/* Template for SAMD21/SAMD51 linking. dollar-sign-curly-bracket items are replaced with strings. */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
/* CIRCUITPY_BOOTLOADER_SIZE is size of bootloader, if any.
|
||||
* SAMD21 Arduino and UF2 bootloaders are 8KiB. SAMD51 UF2 is 6KiB.
|
||||
* FLASH_SIZE is defined in ASF4.
|
||||
* RAM_SIZE is defined in mpconfigport.h, from constants from ASF4.
|
||||
* CIRCUITPY_INTERNAL_CONFIG_SIZE is size of an optional hidden config area, used currently
|
||||
* for crystalless USB timing calibration.
|
||||
* CIRCUITPY_INTERNAL_NVM_SIZE is the size of microntroller.nvm.
|
||||
*/
|
||||
FLASH (rx) : ORIGIN = 0x00000000 + ${BOOTLOADER_SIZE}, LENGTH = ${FLASH_SIZE} - ${BOOTLOADER_SIZE} - ${CIRCUITPY_INTERNAL_CONFIG_SIZE} - ${CIRCUITPY_INTERNAL_NVM_SIZE}
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = ${RAM_SIZE}
|
||||
}
|
||||
|
||||
/* top end of the stack */
|
||||
/* stack must be double-word (8 byte) aligned */
|
||||
_estack = ORIGIN(RAM) + LENGTH(RAM) - 8;
|
||||
_bootloader_dbl_tap = ORIGIN(RAM) + LENGTH(RAM) - 4;
|
||||
|
||||
/* define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sfixed = .;
|
||||
KEEP(*(.vectors)) /* isr vector table */
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx*)
|
||||
*(.gnu.linkonce.armexidx.*)
|
||||
_etext = .; /* define a global symbol at end of code */
|
||||
_sidata = .; /* start of .data section */
|
||||
} > FLASH
|
||||
|
||||
/* This is the initialized data section
|
||||
The program executes knowing that the data is in the RAM
|
||||
but the loader puts the initial values in the FLASH (inidata).
|
||||
It is one task of the startup to copy the initial values from FLASH to RAM. */
|
||||
.data : AT ( _sidata )
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_srelocate = .; /* create a global symbol at data start; used by startup code in order to initialize the .data section in RAM */
|
||||
*(.ramfunc)
|
||||
*(.ramfunc*)
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_erelocate = .; /* define a global symbol at data end; used by startup code in order to initialize the .data section in RAM */
|
||||
} >RAM
|
||||
|
||||
/* Uninitialized data section */
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sbss = .;
|
||||
_szero = .; /* define a global symbol at bss start; used by startup code */
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ezero = .; /* define a global symbol at bss end; used by startup code */
|
||||
_ebss = .;
|
||||
} >RAM
|
||||
|
||||
/* this just checks there is enough RAM for the requested stack. */
|
||||
.stack :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
. = . + ${CIRCUITPY_DEFAULT_STACK_SIZE};
|
||||
. = ALIGN(4);
|
||||
} >RAM
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
|
@ -12,14 +12,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB09)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PB08)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x20-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8021
|
||||
USB_PRODUCT = "CP32-M4"
|
||||
|
|
|
|||
|
|
@ -20,14 +20,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x4097
|
||||
USB_PID = 0x0001
|
||||
USB_PRODUCT = "Datalore IP M4"
|
||||
|
|
|
|||
|
|
@ -10,10 +10,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x04D8
|
||||
USB_PID = 0xEE8C
|
||||
USB_PRODUCT = "datum-Distance"
|
||||
|
|
|
|||
|
|
@ -10,10 +10,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x04D8
|
||||
USB_PID = 0xEE8D
|
||||
USB_PRODUCT = "datum-IMU"
|
||||
|
|
|
|||
|
|
@ -10,10 +10,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x04D8
|
||||
USB_PID = 0xEE8E
|
||||
USB_PRODUCT = "datum-Light"
|
||||
|
|
|
|||
|
|
@ -10,10 +10,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x04D8
|
||||
USB_PID = 0xEE8F
|
||||
USB_PRODUCT = "datum-Weather"
|
||||
|
|
|
|||
|
|
@ -8,12 +8,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define CALIBRATE_CRYSTALLESS 1
|
||||
|
||||
// Explanation of how a user got into safe mode.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x1209
|
||||
USB_PID = 0xBAB6
|
||||
USB_PRODUCT = "Escornabot Makech"
|
||||
|
|
|
|||
|
|
@ -8,10 +8,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA22)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA23)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8015
|
||||
USB_PRODUCT = "Feather M0 Adalogger"
|
||||
|
|
|
|||
|
|
@ -8,10 +8,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8015
|
||||
USB_PRODUCT = "Feather M0"
|
||||
|
|
|
|||
|
|
@ -15,13 +15,6 @@
|
|||
#define MICROPY_PORT_B ( 0 )
|
||||
#define MICROPY_PORT_C ( 0 )
|
||||
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8023
|
||||
USB_PRODUCT = "Feather M0 Express"
|
||||
|
|
|
|||
|
|
@ -15,12 +15,6 @@
|
|||
#define MICROPY_PORT_B ( 0 )
|
||||
#define MICROPY_PORT_C ( 0 )
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8023
|
||||
USB_PRODUCT = "Feather M0 Express"
|
||||
|
|
|
|||
|
|
@ -8,10 +8,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8015
|
||||
USB_PRODUCT = "Feather M0 RFM69"
|
||||
|
|
|
|||
|
|
@ -8,10 +8,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8015
|
||||
USB_PRODUCT = "Feather M0 RFM9x"
|
||||
|
|
|
|||
|
|
@ -17,12 +17,6 @@
|
|||
#define MICROPY_PORT_B ( 0 )
|
||||
#define MICROPY_PORT_C ( 0 )
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8023
|
||||
USB_PRODUCT = "Feather M0 Supersized"
|
||||
|
|
|
|||
|
|
@ -16,14 +16,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define EXTERNAL_FLASH_QSPI_DUAL
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8026
|
||||
USB_PRODUCT = "Feather M4 Express"
|
||||
|
|
|
|||
|
|
@ -14,12 +14,6 @@
|
|||
#define MICROPY_PORT_B ( 0 )
|
||||
#define MICROPY_PORT_C ( 0 )
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8023
|
||||
USB_PRODUCT = "Feather RadioFruit Zigbee"
|
||||
|
|
|
|||
|
|
@ -10,16 +10,12 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA05)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA04)
|
||||
|
||||
#define DEFAULT_UART_BUS_RX (&pin_PA05)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_PA04)
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define IGNORE_PIN_PA03 1
|
||||
#define IGNORE_PIN_PA06 1
|
||||
#define IGNORE_PIN_PA07 1
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x801D
|
||||
USB_PRODUCT = "Gemma M0"
|
||||
|
|
|
|||
|
|
@ -21,14 +21,6 @@
|
|||
#define MICROPY_PORT_C ( PORT_PC24 | PORT_PC30 | PORT_PC31 )
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB21)
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x20-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8032
|
||||
USB_PRODUCT = "Grand Central M4 Express"
|
||||
|
|
|
|||
|
|
@ -16,12 +16,6 @@
|
|||
#define MICROPY_PORT_B ( PORT_PB22 | PORT_PB23 )
|
||||
#define MICROPY_PORT_C ( 0 )
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA17)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA16)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0xD1ED
|
||||
USB_PRODUCT = "HalloWing M0 Express"
|
||||
|
|
|
|||
|
|
@ -16,14 +16,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x804A
|
||||
USB_PRODUCT = "Hallowing M4 Express"
|
||||
|
|
|
|||
|
|
@ -16,12 +16,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8012
|
||||
USB_PRODUCT = "ItsyBitsy M0 Express"
|
||||
|
|
@ -21,4 +20,3 @@ CIRCUITPY_RTC = 0
|
|||
|
||||
CFLAGS_INLINE_LIMIT = 60
|
||||
SUPEROPT_GC = 0
|
||||
|
||||
|
|
|
|||
|
|
@ -17,14 +17,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x802C
|
||||
USB_PRODUCT = "ItsyBitsy M4 Express"
|
||||
|
|
|
|||
|
|
@ -14,8 +14,6 @@
|
|||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 0
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - 0x010000)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA17)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA16)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader.ld
|
||||
USB_VID = 0x04D8
|
||||
USB_PID = 0xED94
|
||||
USB_PRODUCT = "kicksat-sprite"
|
||||
|
|
|
|||
|
|
@ -8,12 +8,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define CALIBRATE_CRYSTALLESS 1
|
||||
|
||||
// Explanation of how a user got into safe mode.
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x1209
|
||||
USB_PID = 0xBAB1
|
||||
USB_PRODUCT = "Meow Meow"
|
||||
|
|
|
|||
|
|
@ -21,12 +21,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8014
|
||||
USB_PRODUCT = "Metro M0 Express"
|
||||
|
|
|
|||
|
|
@ -18,14 +18,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8038
|
||||
USB_PRODUCT = "Metro M4 Airlift Lite"
|
||||
|
|
|
|||
|
|
@ -20,14 +20,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define BOARD_HAS_CRYSTAL 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8021
|
||||
USB_PRODUCT = "Metro M4 Express"
|
||||
|
|
|
|||
|
|
@ -17,14 +17,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x1209
|
||||
USB_PID = 0x2017
|
||||
USB_PRODUCT = "Mini SAM M4"
|
||||
|
|
|
|||
|
|
@ -13,14 +13,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA01)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA00)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8048
|
||||
USB_PRODUCT = "Monster M4SK"
|
||||
|
|
|
|||
|
|
@ -5,11 +5,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
|
||||
#define IGNORE_PIN_PB00 1
|
||||
#define IGNORE_PIN_PB01 1
|
||||
#define IGNORE_PIN_PB02 1
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x801D
|
||||
USB_PRODUCT = "PewPew 10.2"
|
||||
|
|
|
|||
|
|
@ -9,14 +9,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA01)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA00)
|
||||
|
||||
|
|
@ -48,4 +40,3 @@
|
|||
#define IGNORE_PIN_PB09 1
|
||||
#define IGNORE_PIN_PB10 1
|
||||
#define IGNORE_PIN_PB11 1
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader.ld
|
||||
USB_VID = 0x1d50
|
||||
USB_PID = 0x60e8
|
||||
USB_PRODUCT = "PewPew M4"
|
||||
|
|
|
|||
|
|
@ -8,10 +8,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define IGNORE_PIN_PA02 1
|
||||
#define IGNORE_PIN_PA03 1
|
||||
#define IGNORE_PIN_PA04 1
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8028
|
||||
USB_PRODUCT = "pIRKey M0"
|
||||
|
|
|
|||
|
|
@ -14,14 +14,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8034
|
||||
USB_PRODUCT = "PyBadge"
|
||||
|
|
|
|||
|
|
@ -14,14 +14,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8043
|
||||
USB_PRODUCT = "PyBadge AirLift"
|
||||
|
|
|
|||
|
|
@ -13,14 +13,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x803E
|
||||
USB_PRODUCT = "PyGamer"
|
||||
|
|
|
|||
|
|
@ -13,14 +13,6 @@
|
|||
#define MICROPY_PORT_C (0)
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x803E
|
||||
USB_PRODUCT = "PyGamer Advance"
|
||||
|
|
|
|||
|
|
@ -17,14 +17,6 @@
|
|||
#define MICROPY_PORT_C ( 0 )
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PB02)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x20-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8036
|
||||
USB_PRODUCT = "PyPortal"
|
||||
|
|
|
|||
|
|
@ -16,14 +16,6 @@
|
|||
#define MICROPY_PORT_C ( 0 )
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PB02)
|
||||
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd51x20-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8054
|
||||
USB_PRODUCT = "PyPortal Titano"
|
||||
|
|
|
|||
|
|
@ -10,10 +10,6 @@
|
|||
#define MICROPY_PORT_B (0)
|
||||
#define MICROPY_PORT_C (0)
|
||||
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define IGNORE_PIN_PA12 1
|
||||
#define IGNORE_PIN_PA13 1
|
||||
#define IGNORE_PIN_PA16 1
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
LD_FILE = boards/samd21x18-bootloader.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x804C
|
||||
USB_PRODUCT = "PyRuler"
|
||||
|
|
|
|||
|
|
@ -17,13 +17,6 @@
|
|||
#define MICROPY_PORT_B ( 0 )
|
||||
#define MICROPY_PORT_C ( 0 )
|
||||
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code.
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
||||
|
||||
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define CALIBRATE_CRYSTALLESS 1
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
|
||||
|
|
@ -39,4 +32,3 @@
|
|||
// USB is always used internally so skip the pin objects for it.
|
||||
#define IGNORE_PIN_PA24 1
|
||||
#define IGNORE_PIN_PA25 1
|
||||
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue