extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the MICROPY_VFS_FAT config to the Makefile level to replace it. It also moves the include of the oofatfs source files in the build from each port to a central place in extmod/extmod.mk. For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1 at the level of the Makefile. This will include the relevant oofatfs files in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
This commit is contained in:
Damien George
parent
1266ba9754
commit
799b6d1e0c
@ -1,7 +1,20 @@
|
||||
# This makefile fragment provides rules to build 3rd-party components for extmod modules
|
||||
|
||||
################################################################################
|
||||
# VFS FAT FS
|
||||
|
||||
OOFATFS_DIR = lib/oofatfs
|
||||
|
||||
# this sets the config file for FatFs
|
||||
CFLAGS_MOD += -DFFCONF_H=\"lib/oofatfs/ffconf.h\"
|
||||
CFLAGS_MOD += -DFFCONF_H=\"$(OOFATFS_DIR)/ffconf.h\"
|
||||
|
||||
ifeq ($(MICROPY_VFS_FAT),1)
|
||||
CFLAGS_MOD += -DMICROPY_VFS_FAT=1
|
||||
SRC_MOD += $(addprefix $(OOFATFS_DIR)/,\
|
||||
ff.c \
|
||||
ffunicode.c \
|
||||
)
|
||||
endif
|
||||
|
||||
################################################################################
|
||||
# VFS littlefs
|
||||
|
||||
@ -29,8 +29,8 @@ QSTR_GLOBAL_REQUIREMENTS = $(SDKCONFIG_H)
|
||||
|
||||
MICROPY_PY_USSL = 0
|
||||
MICROPY_SSL_AXTLS = 0
|
||||
MICROPY_FATFS = 1
|
||||
MICROPY_PY_BTREE = 1
|
||||
MICROPY_VFS_FAT = 1
|
||||
MICROPY_VFS_LFS2 = 1
|
||||
|
||||
FROZEN_MANIFEST ?= boards/manifest.py
|
||||
@ -348,12 +348,6 @@ LIB_SRC_C = $(addprefix lib/,\
|
||||
utils/sys_stdio_mphal.c \
|
||||
)
|
||||
|
||||
ifeq ($(MICROPY_FATFS), 1)
|
||||
LIB_SRC_C += \
|
||||
lib/oofatfs/ff.c \
|
||||
lib/oofatfs/ffunicode.c
|
||||
endif
|
||||
|
||||
DRIVERS_SRC_C = $(addprefix drivers/,\
|
||||
bus/softspi.c \
|
||||
dht/dht.c \
|
||||
|
||||
@ -61,7 +61,6 @@ void *esp_native_code_commit(void*, size_t);
|
||||
#define MICROPY_ENABLE_SCHEDULER (1)
|
||||
#define MICROPY_SCHEDULER_DEPTH (8)
|
||||
#define MICROPY_VFS (1)
|
||||
#define MICROPY_VFS_FAT (1)
|
||||
|
||||
// control over Python builtins
|
||||
#define MICROPY_PY_FUNCTION_ATTRS (1)
|
||||
|
||||
@ -22,7 +22,6 @@ QSTR_GLOBAL_DEPENDENCIES = $(BOARD_DIR)/mpconfigboard.h
|
||||
MICROPY_PY_USSL = 1
|
||||
MICROPY_SSL_AXTLS = 1
|
||||
AXTLS_DEFS_EXTRA = -Dabort=abort_ -DRT_MAX_PLAIN_LENGTH=1024 -DRT_EXTRA=4096
|
||||
MICROPY_FATFS ?= 1
|
||||
MICROPY_PY_BTREE ?= 1
|
||||
BTREE_DEFS_EXTRA = -DDEFPSIZE=1024 -DMINCACHE=3
|
||||
|
||||
@ -147,12 +146,6 @@ LIB_SRC_C = $(addprefix lib/,\
|
||||
utils/sys_stdio_mphal.c \
|
||||
)
|
||||
|
||||
ifeq ($(MICROPY_FATFS), 1)
|
||||
LIB_SRC_C += \
|
||||
lib/oofatfs/ff.c \
|
||||
lib/oofatfs/ffunicode.c
|
||||
endif
|
||||
|
||||
DRIVERS_SRC_C = $(addprefix drivers/,\
|
||||
bus/softspi.c \
|
||||
dht/dht.c \
|
||||
|
||||
@ -10,7 +10,6 @@
|
||||
|
||||
#define MICROPY_READER_VFS (MICROPY_VFS)
|
||||
#define MICROPY_VFS (1)
|
||||
#define MICROPY_VFS_FAT (1)
|
||||
|
||||
#define MICROPY_PY_BUILTINS_SLICE_ATTRS (1)
|
||||
#define MICROPY_PY_ALL_SPECIAL_METHODS (1)
|
||||
|
||||
1
ports/esp8266/boards/GENERIC/mpconfigboard.mk
Normal file
1
ports/esp8266/boards/GENERIC/mpconfigboard.mk
Normal file
@ -0,0 +1 @@
|
||||
MICROPY_VFS_FAT = 1
|
||||
@ -1,3 +1,3 @@
|
||||
MICROPY_FATFS = 0
|
||||
MICROPY_PY_BTREE = 0
|
||||
MICROPY_VFS_FAT = 0
|
||||
LD_FILES = boards/esp8266_512k.ld
|
||||
|
||||
@ -43,8 +43,7 @@ include ../../py/py.mk
|
||||
|
||||
GIT_SUBMODULES = lib/nrfx lib/tinyusb
|
||||
|
||||
MICROPY_FATFS ?= 0
|
||||
FATFS_DIR = lib/oofatfs
|
||||
MICROPY_VFS_FAT ?= 0
|
||||
MPY_CROSS = ../../mpy-cross/mpy-cross
|
||||
MPY_TOOL = ../../tools/mpy-tool.py
|
||||
|
||||
@ -318,7 +317,7 @@ OBJ += $(addprefix $(BUILD)/, $(SYSTEM_C_SRC:.c=.o))
|
||||
OBJ += $(addprefix $(BUILD)/, $(SRC_LIB:.c=.o))
|
||||
OBJ += $(BUILD)/pins_gen.o
|
||||
|
||||
$(BUILD)/$(FATFS_DIR)/ff.o: COPT += -Os
|
||||
$(BUILD)/$(OOFATFS_DIR)/ff.o: COPT += -Os
|
||||
$(filter $(PY_BUILD)/../extmod/vfs_fat_%.o, $(PY_O)): COPT += -Os
|
||||
|
||||
.PHONY: all flash deploy sd binary hex
|
||||
|
||||
@ -107,12 +107,12 @@ To use frozen modules, put them in a directory (e.g. `freeze/`) and supply
|
||||
|
||||
make BOARD=pca10040 FROZEN_MPY_DIR=freeze
|
||||
|
||||
## Enable MICROPY_FATFS
|
||||
As the `oofatfs` module is not having header guards that can exclude the implementation compile time, this port provides a flag to enable it explicitly. The MICROPY_FATFS is by default set to 0 and has to be set to 1 if `oofatfs` files should be compiled. This will be in addition of setting `MICROPY_VFS` and `MICROPY_VFS_FAT` in mpconfigport.h.
|
||||
## Enable MICROPY_VFS_FAT
|
||||
As the `oofatfs` module is not having header guards that can exclude the implementation compile time, this port provides a flag to enable it explicitly. The MICROPY_VFS_FAT is by default set to 0 and has to be set to 1 if `oofatfs` files should be compiled. This will be in addition of setting `MICROPY_VFS` in mpconfigport.h.
|
||||
|
||||
For example:
|
||||
|
||||
make BOARD=pca10040 MICROPY_FATFS=1
|
||||
make BOARD=pca10040 MICROPY_VFS_FAT=1
|
||||
|
||||
## Target Boards and Make Flags
|
||||
|
||||
|
||||
@ -33,7 +33,6 @@
|
||||
#ifndef MICROPY_VFS
|
||||
#define MICROPY_VFS (0)
|
||||
#endif
|
||||
#define MICROPY_VFS_FAT (MICROPY_VFS)
|
||||
#define MICROPY_ALLOC_PATH_MAX (512)
|
||||
#define MICROPY_PERSISTENT_CODE_LOAD (0)
|
||||
#define MICROPY_EMIT_THUMB (0)
|
||||
|
||||
@ -34,7 +34,6 @@ CMSIS_DIR=$(TOP)/lib/stm32lib/CMSIS/STM32$(MCU_SERIES_UPPER)xx/Include
|
||||
HAL_DIR=lib/stm32lib/STM32$(MCU_SERIES_UPPER)xx_HAL_Driver
|
||||
USBDEV_DIR=usbdev
|
||||
#USBHOST_DIR=usbhost
|
||||
FATFS_DIR=lib/oofatfs
|
||||
DFU=$(TOP)/tools/dfu.py
|
||||
# may need to prefix dfu-util with sudo
|
||||
USE_PYDFU ?= 1
|
||||
@ -128,8 +127,6 @@ MPY_CROSS_FLAGS += -march=armv7m
|
||||
|
||||
SRC_LIB = $(addprefix lib/,\
|
||||
libc/string0.c \
|
||||
oofatfs/ff.c \
|
||||
oofatfs/ffunicode.c \
|
||||
mp-readline/readline.c \
|
||||
netutils/netutils.c \
|
||||
netutils/trace.c \
|
||||
@ -480,7 +477,7 @@ $(BUILD)/lib/libc/string0.o: COPT += -O2
|
||||
# If we compile these using -O0 then it won't fit. So if you really want these
|
||||
# to be compiled with -O0, then edit boards/common.ld (in the .isr_vector section)
|
||||
# and comment out the following lines.
|
||||
$(BUILD)/$(FATFS_DIR)/ff.o: COPT += -Os
|
||||
$(BUILD)/$(OOFATFS_DIR)/ff.o: COPT += -Os
|
||||
$(filter $(PY_BUILD)/../extmod/vfs_fat_%.o, $(PY_O)): COPT += -Os
|
||||
$(PY_BUILD)/formatfloat.o: COPT += -Os
|
||||
$(PY_BUILD)/parsenum.o: COPT += -Os
|
||||
|
||||
@ -14,7 +14,6 @@
|
||||
#define MICROPY_PY_NETWORK (0)
|
||||
#define MICROPY_PY_STM (0)
|
||||
#define MICROPY_PY_PYB_LEGACY (0)
|
||||
#define MICROPY_VFS_FAT (0)
|
||||
|
||||
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0)
|
||||
#define MICROPY_HW_ENABLE_RTC (1)
|
||||
|
||||
@ -4,5 +4,8 @@ MICROPY_FLOAT_IMPL = none
|
||||
AF_FILE = boards/stm32l072_af.csv
|
||||
LD_FILES = boards/stm32l072xz.ld boards/common_basic.ld
|
||||
|
||||
# MicroPython settings
|
||||
MICROPY_VFS_FAT = 0
|
||||
|
||||
# Don't include default frozen modules because MCU is tight on flash space
|
||||
FROZEN_MANIFEST ?=
|
||||
|
||||
@ -7,7 +7,6 @@
|
||||
#define MICROPY_PY_NETWORK (0)
|
||||
#define MICROPY_PY_STM (0)
|
||||
#define MICROPY_PY_PYB_LEGACY (0)
|
||||
#define MICROPY_VFS_FAT (0)
|
||||
|
||||
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0)
|
||||
#define MICROPY_HW_ENABLE_RTC (1)
|
||||
|
||||
@ -3,5 +3,8 @@ CMSIS_MCU = STM32F091xC
|
||||
AF_FILE = boards/stm32f091_af.csv
|
||||
LD_FILES = boards/stm32f091xc.ld boards/common_basic.ld
|
||||
|
||||
# MicroPython settings
|
||||
MICROPY_VFS_FAT = 0
|
||||
|
||||
# Don't include default frozen modules because MCU is tight on flash space
|
||||
FROZEN_MANIFEST ?=
|
||||
|
||||
@ -14,7 +14,6 @@
|
||||
#define MICROPY_PY_NETWORK (0)
|
||||
#define MICROPY_PY_STM (0)
|
||||
#define MICROPY_PY_PYB_LEGACY (0)
|
||||
#define MICROPY_VFS_FAT (0)
|
||||
|
||||
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0)
|
||||
#define MICROPY_HW_ENABLE_RTC (1)
|
||||
|
||||
@ -3,5 +3,8 @@ CMSIS_MCU = STM32L073xx
|
||||
AF_FILE = boards/stm32l072_af.csv
|
||||
LD_FILES = boards/stm32l072xz.ld boards/common_basic.ld
|
||||
|
||||
# MicroPython settings
|
||||
MICROPY_VFS_FAT = 0
|
||||
|
||||
# Don't include default frozen modules because MCU is tight on flash space
|
||||
FROZEN_MANIFEST ?=
|
||||
|
||||
@ -8,7 +8,6 @@
|
||||
#define MICROPY_PY_NETWORK (0)
|
||||
#define MICROPY_PY_STM (0)
|
||||
#define MICROPY_PY_PYB_LEGACY (0)
|
||||
#define MICROPY_VFS_FAT (0)
|
||||
|
||||
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0)
|
||||
#define MICROPY_HW_ENABLE_RTC (1)
|
||||
|
||||
@ -4,5 +4,8 @@ AF_FILE = boards/stm32l432_af.csv
|
||||
LD_FILES = boards/stm32l432.ld boards/common_basic.ld
|
||||
OPENOCD_CONFIG = boards/openocd_stm32l4.cfg
|
||||
|
||||
# MicroPython settings
|
||||
MICROPY_VFS_FAT = 0
|
||||
|
||||
# Don't include default frozen modules because MCU is tight on flash space
|
||||
FROZEN_MANIFEST ?=
|
||||
|
||||
@ -84,9 +84,6 @@
|
||||
#define MICROPY_ENABLE_SCHEDULER (1)
|
||||
#define MICROPY_SCHEDULER_DEPTH (8)
|
||||
#define MICROPY_VFS (1)
|
||||
#ifndef MICROPY_VFS_FAT
|
||||
#define MICROPY_VFS_FAT (1)
|
||||
#endif
|
||||
|
||||
// control over Python builtins
|
||||
#define MICROPY_PY_FUNCTION_ATTRS (1)
|
||||
|
||||
@ -8,3 +8,6 @@ MICROPY_PY_WIZNET5K ?= 0
|
||||
|
||||
# cc3k module for wifi support
|
||||
MICROPY_PY_CC3K ?= 0
|
||||
|
||||
# VFS FAT FS support
|
||||
MICROPY_VFS_FAT ?= 1
|
||||
|
||||
@ -163,12 +163,6 @@ LIB_SRC_C = $(addprefix lib/,\
|
||||
timeutils/timeutils.c \
|
||||
)
|
||||
|
||||
# FatFS VFS support
|
||||
LIB_SRC_C += $(addprefix lib/,\
|
||||
oofatfs/ff.c \
|
||||
oofatfs/ffunicode.c \
|
||||
)
|
||||
|
||||
OBJ = $(PY_O)
|
||||
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
||||
OBJ += $(addprefix $(BUILD)/, $(LIB_SRC_C:.c=.o))
|
||||
@ -257,7 +251,7 @@ coverage:
|
||||
-Wold-style-definition -Wpointer-arith -Wshadow -Wuninitialized -Wunused-parameter \
|
||||
-DMICROPY_UNIX_COVERAGE' \
|
||||
LDFLAGS_EXTRA='-fprofile-arcs -ftest-coverage' \
|
||||
MICROPY_VFS_LFS1=1 MICROPY_VFS_LFS2=1 \
|
||||
MICROPY_VFS_FAT=1 MICROPY_VFS_LFS1=1 MICROPY_VFS_LFS2=1 \
|
||||
FROZEN_MANIFEST=manifest_coverage.py \
|
||||
BUILD=build-coverage PROG=micropython_coverage
|
||||
|
||||
|
||||
@ -152,7 +152,6 @@
|
||||
#define MICROPY_FATFS_RPATH (2)
|
||||
#define MICROPY_FATFS_MAX_SS (4096)
|
||||
#define MICROPY_FATFS_LFN_CODE_PAGE 437 /* 1=SFN/ANSI 437=LFN/U.S.(OEM) */
|
||||
#define MICROPY_VFS_FAT (0)
|
||||
|
||||
// Define to MICROPY_ERROR_REPORTING_DETAILED to get function, etc.
|
||||
// names in exception messages (may require more RAM).
|
||||
|
||||
@ -55,8 +55,6 @@
|
||||
#define MICROPY_PY_URE_MATCH_SPAN_START_END (1)
|
||||
#define MICROPY_PY_URE_SUB (1)
|
||||
#define MICROPY_VFS_POSIX (1)
|
||||
#undef MICROPY_VFS_FAT
|
||||
#define MICROPY_VFS_FAT (1)
|
||||
#define MICROPY_PY_FRAMEBUF (1)
|
||||
#define MICROPY_PY_COLLECTIONS_NAMEDTUPLE__ASDICT (1)
|
||||
#define MICROPY_PY_UCRYPTOLIB (1)
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user