Merge remote-tracking branch 'adafruit/main' into rp2040_flash

.github/workflows/build.yml

@@ -177,6 +177,8 @@ jobs:
         - "ADM_B_NRF52840_1"
         - "TG-Watch"
         - "adafruit_feather_rp2040"
+        - "adafruit_itsybitsy_rp2040"
+        - "adafruit_qtpy_rp2040"
         - "aloriumtech_evo_m51"
         - "aramcon_badge_2019"
         - "arduino_mkr1300"
@@ -298,10 +300,10 @@ jobs:
         - "pyruler"
         - "qtpy_m0"
         - "qtpy_m0_haxpress"
-        - "qtpy_rp2040"
         - "raspberry_pi_pico"
         - "raytac_mdbt50q-db-40"
         - "robohatmm1_m4"
+        - "rotary_trinkey_m0"
         - "sam32"
         - "same54_xplained"
         - "seeeduino_wio_terminal"
@@ -445,6 +447,7 @@ jobs:
         board:
         - "adafruit_feather_esp32s2_nopsram"
         - "adafruit_feather_esp32s2_tftback_nopsram"
+        - "adafruit_funhouse"
         - "adafruit_magtag_2.9_grayscale"
         - "adafruit_metro_esp32s2"
         - "electroniccats_bastwifi"

.gitignore

@@ -86,3 +86,6 @@ TAGS
 ####################
 .venv
 .env
+
+# Uncrustify formatting
+*.uncrustify

locale/ID.po

@@ -343,6 +343,10 @@ msgstr "Semua perangkat SPI sedang digunakan"
 msgid "All UART peripherals are in use"
 msgstr "Semua perangkat UART sedang digunakan"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Semua channel event sedang digunakan"
@@ -557,6 +561,7 @@ msgstr "Buffer terlalu pendek untuk %d byte"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Pin bus %d sudah digunakan"
@@ -679,7 +684,7 @@ msgstr "Tidak dapat transfer tanpa pin MOSI dan MISO."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "tidak dapat mendapatkan ukuran scalar secara tidak ambigu"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 "Tidak dapat membuat variasi frekuensi pada penghitung waktu yang sudah "
@@ -766,14 +771,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr "Tidak dapat menginisialisasi UART"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "Tidak dapat menginisialisasi kanal"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "Tidak dapat menginisialisasi timer"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "Tidak dapat menginisialisasi ulang kanal"
@@ -794,7 +791,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "Tidak dapat memulai PWM"
 
@@ -1044,7 +1041,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "Frekuensi harus cocok dengan PWMOut yang ada menggunakan timer ini"
 
@@ -1274,10 +1271,6 @@ msgstr "Ukuran potongan format tidak valid"
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "Frekuensi yang diberikan tidak valid"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Akses memori tidak valid."
@@ -1323,10 +1316,6 @@ msgstr "Pin untuk channel kanan tidak valid"
 msgid "Invalid pins"
 msgstr "Pin-pin tidak valid"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "Pin untuk PWMOut tidak valid"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1579,18 +1568,6 @@ msgstr "Tidak ada kunci yang ditentukan"
 msgid "No long integer support"
 msgstr "Tidak ada dukungan bilangan bulat yang panjang"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "Tidak ada lagi penghitung waktu yang tersedia pada pin ini."
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1758,7 +1735,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus belum didukung"
@@ -2164,11 +2140,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Untuk keluar, silahkan reset board tanpa "
@@ -3789,6 +3760,7 @@ msgstr ""
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4317,6 +4289,21 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "Tidak dapat menginisialisasi kanal"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "Tidak dapat menginisialisasi timer"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "Frekuensi yang diberikan tidak valid"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "Pin untuk PWMOut tidak valid"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "Tidak ada lagi penghitung waktu yang tersedia pada pin ini."
+
 #~ msgid "Group full"
 #~ msgstr "Grup penuh"
 

locale/circuitpython.pot

@@ -338,6 +338,10 @@ msgstr ""
 msgid "All UART peripherals are in use"
 msgstr ""
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr ""
@@ -550,6 +554,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr ""
@@ -666,7 +671,7 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -748,14 +753,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -776,7 +773,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1025,7 +1022,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1253,10 +1250,6 @@ msgstr ""
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1302,10 +1295,6 @@ msgstr ""
 msgid "Invalid pins"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1558,18 +1547,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1729,7 +1706,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -2124,11 +2100,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
@@ -3737,6 +3708,7 @@ msgstr ""
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

locale/cs.po

@@ -341,6 +341,10 @@ msgstr ""
 msgid "All UART peripherals are in use"
 msgstr ""
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr ""
@@ -553,6 +557,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr ""
@@ -669,7 +674,7 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -751,14 +756,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -779,7 +776,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1028,7 +1025,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1256,10 +1253,6 @@ msgstr ""
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1305,10 +1298,6 @@ msgstr ""
 msgid "Invalid pins"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1561,18 +1550,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1732,7 +1709,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -2127,11 +2103,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
@@ -3740,6 +3711,7 @@ msgstr ""
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

locale/de_DE.po

@@ -347,6 +347,10 @@ msgstr "Alle SPI-Peripheriegeräte sind in Benutzung"
 msgid "All UART peripherals are in use"
 msgstr "Alle UART-Peripheriegeräte sind in Benutzung"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Alle event Kanäle werden benutzt"
@@ -563,6 +567,7 @@ msgstr "Puffer um %d Bytes zu kurz"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Bus pin %d wird schon benutzt"
@@ -680,7 +685,7 @@ msgstr "Übertragung ohne MOSI- und MISO-Pins nicht möglich."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "sizeof scalar kann nicht eindeutig bestimmt werden"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 "Die Frequenz eines bereits verwendeten Timers kann nicht variiert werden"
@@ -768,14 +773,6 @@ msgstr "Konnte SDKarte nicht initialisieren"
 msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "Kanal konnte nicht initialisiert werden"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "Timer konnte nicht initialisiert werden"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "Kanal konnte nicht neu initiiert werden"
@@ -796,7 +793,7 @@ msgstr "Clock konnte nicht ermittelt werden"
 msgid "Could not set address"
 msgstr "Konnte Adresse nicht setzen"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "PWM konnte nicht gestartet werden"
 
@@ -1046,7 +1043,7 @@ msgstr "Format nicht unterstützt"
 msgid "Framebuffer requires %d bytes"
 msgstr "Framepuffer benötigt %d bytes"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 "Die Frequenz muss mit dem vorhandenen PWMOut unter Verwendung dieses Timers "
@@ -1278,10 +1275,6 @@ msgstr "Ungültige format chunk size"
 msgid "Invalid frequency"
 msgstr "Ungültige Frequenz"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "Ungültige Frequenz geliefert"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Ungültiger Speicherzugriff."
@@ -1327,10 +1320,6 @@ msgstr "Ungültiger Pin für rechten Kanal"
 msgid "Invalid pins"
 msgstr "Ungültige Pins"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "Ungültige Pins für PWMOut"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1585,18 +1574,6 @@ msgstr "Es wurde kein Schlüssel angegeben"
 msgid "No long integer support"
 msgstr "Keine langen Integer (long) unterstützt"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "An diesem Pin sind keine Timer mehr verfügbar."
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1762,7 +1739,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus wird noch nicht unterstützt"
@@ -2174,11 +2150,6 @@ msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 "Zeitbeschränkung ist zu groß: Maximale Zeitbeschränkung ist %d Sekunden"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Zum beenden, resette bitte das board ohne "
@@ -3828,6 +3799,7 @@ msgstr "pow () mit 3 Argumenten erfordert Integer"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4362,6 +4334,21 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "Kanal konnte nicht initialisiert werden"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "Timer konnte nicht initialisiert werden"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "Ungültige Frequenz geliefert"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "Ungültige Pins für PWMOut"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "An diesem Pin sind keine Timer mehr verfügbar."
+
 #~ msgid "matrix dimensions do not match"
 #~ msgstr "Matrix Dimensionen stimmen nicht überein"
 

locale/el.po

@@ -338,6 +338,10 @@ msgstr ""
 msgid "All UART peripherals are in use"
 msgstr ""
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr ""
@@ -550,6 +554,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr ""
@@ -666,7 +671,7 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -748,14 +753,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -776,7 +773,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1025,7 +1022,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1253,10 +1250,6 @@ msgstr ""
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1302,10 +1295,6 @@ msgstr ""
 msgid "Invalid pins"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1558,18 +1547,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1729,7 +1706,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -2124,11 +2100,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
@@ -3737,6 +3708,7 @@ msgstr ""
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

locale/en_GB.po

@@ -337,6 +337,10 @@ msgstr ""
 msgid "All UART peripherals are in use"
 msgstr ""
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr ""
@@ -549,6 +553,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr ""
@@ -665,7 +670,7 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -747,14 +752,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -775,7 +772,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1024,7 +1021,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1252,10 +1249,6 @@ msgstr ""
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1301,10 +1294,6 @@ msgstr ""
 msgid "Invalid pins"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1557,18 +1546,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1728,7 +1705,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -2123,11 +2099,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
@@ -3736,6 +3707,7 @@ msgstr ""
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

locale/es.po

@@ -8,8 +8,8 @@ msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-03-12 02:03+0000\n"
+"PO-Revision-Date: 2021-03-21 21:29+0000\n"
-"Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
+"Last-Translator: Jose David M <jquintana202020@gmail.com>\n"
 "Language-Team: \n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
@@ -349,6 +349,10 @@ msgstr "Todos los periféricos SPI están siendo usados"
 msgid "All UART peripherals are in use"
 msgstr "Todos los periféricos UART están siendo usados"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr "Todos los canales esta en uso"
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Todos los canales de eventos estan siendo usados"
@@ -568,6 +572,7 @@ msgstr "Búffer muy corto por %d bytes"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Bus pin %d ya está siendo utilizado"
@@ -688,7 +693,7 @@ msgstr "No se puede transmitir sin pines MOSI y MISO."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "No se puede obtener inequívocamente sizeof escalar"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "No puede variar la frecuencia en un temporizador que ya está en uso"
 
@@ -774,14 +779,6 @@ msgstr "No se pudo inicializar SDCard"
 msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "No se pudo inicializar el canal"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "No se pudo inicializar el temporizador"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "No se pudo reiniciar el canal"
@@ -802,7 +799,7 @@ msgstr "No puedo traer el reloj"
 msgid "Could not set address"
 msgstr "No se puede definir la dirección"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "No se pudo iniciar PWM"
 
@@ -1051,7 +1048,7 @@ msgstr "Sin capacidades para el formato"
 msgid "Framebuffer requires %d bytes"
 msgstr "Framebuffer requiere %d bytes"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 "La frecuencia debe coincidir con PWMOut existente usando este temporizador"
@@ -1289,10 +1286,6 @@ msgstr "Formato de fragmento de formato no válido"
 msgid "Invalid frequency"
 msgstr "Frecuencia inválida"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "Frecuencia suministrada no válida"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Acceso a memoria no válido."
@@ -1338,10 +1331,6 @@ msgstr "Pin inválido para canal derecho"
 msgid "Invalid pins"
 msgstr "pines inválidos"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "Pines inválidos para PWMOut"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1598,18 +1587,6 @@ msgstr "No se especificó ninguna llave"
 msgid "No long integer support"
 msgstr "No hay soporte de entero largo"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr "No hay más canales disponibles"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr "No hay más temporizadores disponibles"
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "No hay más temporizadores disponibles en este pin."
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr "No hay una red con ese ssid"
@@ -1777,7 +1754,6 @@ msgid "PWM slice channel A already in use"
 msgstr "Segmento del PWM canal A ya esta en uso"
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus todavía no soportado"
@@ -2192,13 +2168,6 @@ msgstr ""
 "Tiempo de espera demasiado largo: El tiempo máximo de espera es de %d "
 "segundos"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-"El temporizador es utilizado para uso interno - declare los pines para PWM "
-"más temprano en el programa"
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Para salir, por favor reinicia la tarjeta sin "
@@ -2942,7 +2911,7 @@ msgstr "Orden de diferenciación fuera de rango"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "dimensions do not match"
-msgstr ""
+msgstr "las dimensiones no concuerdan"
 
 #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
 #: shared-bindings/math/__init__.c
@@ -3305,7 +3274,7 @@ msgstr "argumentos inválidos"
 #: shared-bindings/bitmaptools/__init__.c
 #, c-format
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
-msgstr ""
+msgstr "los bits_per_pixel %d no son validos, deben ser 1, 4, 8, 16, 24 o 32"
 
 #: extmod/modussl_axtls.c
 msgid "invalid cert"
@@ -3318,12 +3287,12 @@ msgstr "index dupterm inválido"
 #: shared-bindings/bitmaptools/__init__.c
 #, c-format
 msgid "invalid element size %d for bits_per_pixel %d\n"
-msgstr ""
+msgstr "el tamaño del elemento no es valido%d por bits_per_pixel %d\n"
 
 #: shared-bindings/bitmaptools/__init__.c
 #, c-format
 msgid "invalid element_size %d, must be, 1, 2, or 4"
-msgstr ""
+msgstr "el element_size %d,no es valido, debe ser 1,2 ó 4"
 
 #: extmod/modframebuf.c
 msgid "invalid format"
@@ -3833,6 +3802,7 @@ msgstr "pow() con 3 argumentos requiere enteros"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4363,6 +4333,34 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "No se pudo inicializar el canal"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "No se pudo inicializar el temporizador"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "Frecuencia suministrada no válida"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "Pines inválidos para PWMOut"
+
+#~ msgid "No more channels available"
+#~ msgstr "No hay más canales disponibles"
+
+#~ msgid "No more timers available"
+#~ msgstr "No hay más temporizadores disponibles"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "No hay más temporizadores disponibles en este pin."
+
+#~ msgid ""
+#~ "Timer was reserved for internal use - declare PWM pins earlier in the "
+#~ "program"
+#~ msgstr ""
+#~ "El temporizador es utilizado para uso interno - declare los pines para "
+#~ "PWM más temprano en el programa"
+
 #~ msgid "matrix dimensions do not match"
 #~ msgstr "las dimensiones de la matriz no coinciden"
 

locale/fil.po

@@ -341,6 +341,10 @@ msgstr "Lahat ng SPI peripherals ay ginagamit"
 msgid "All UART peripherals are in use"
 msgstr "Lahat ng I2C peripherals ginagamit"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Lahat ng event channels ginagamit"
@@ -555,6 +559,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, fuzzy, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Ginagamit na ang DAC"
@@ -673,7 +678,7 @@ msgstr "Hindi maaaring ilipat kapag walang MOSI at MISO pin."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "Hindi puedeng hindi sigurado ang get sizeof scalar"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -756,14 +761,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -784,7 +781,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1038,7 +1035,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1268,10 +1265,6 @@ msgstr "Mali ang format ng chunk size"
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1317,10 +1310,6 @@ msgstr "Mali ang pin para sa kanang channel"
 msgid "Invalid pins"
 msgstr "Mali ang pins"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1573,18 +1562,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1748,7 +1725,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -2144,11 +2120,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Para lumabas, paki-reset ang board na wala ang "
@@ -3786,6 +3757,7 @@ msgstr "pow() na may 3 argumento kailangan ng integers"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

locale/fr.po

@@ -8,7 +8,7 @@ msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-03-16 14:54+0000\n"
+"PO-Revision-Date: 2021-03-21 21:29+0000\n"
 "Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
@@ -349,6 +349,10 @@ msgstr "Tous les périphériques SPI sont utilisés"
 msgid "All UART peripherals are in use"
 msgstr "Tous les périphériques UART sont utilisés"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr "Tout les canaux sont utilisés"
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Tous les canaux d'événements sont utilisés"
@@ -475,7 +479,7 @@ msgstr "Au-dessous de la fréquence d'images minimale"
 
 #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
 msgid "Bit clock and word select must be sequential pins"
-msgstr ""
+msgstr "Bit clock et word select doivent êtres sur des broches séquentielles"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Bit clock and word select must share a clock unit"
@@ -567,6 +571,7 @@ msgstr "Tampon trop court de %d octets"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "La broche %d du bus est déjà utilisée"
@@ -692,7 +697,7 @@ msgstr "Pas de transfert sans broches MOSI et MISO."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "Impossible d'obtenir la taille (sizeof) du scalaire sans ambigüité"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Impossible de faire varier la fréquence sur un minuteur déjà utilisée"
 
@@ -779,14 +784,6 @@ msgstr "Impossible d'initialiser la carte SD"
 msgid "Could not initialize UART"
 msgstr "Impossible d'initialiser UART"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "Impossible d'initialiser le canal"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "Impossible d'initialiser le minuteur"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "Impossible de réinitialiser le canal"
@@ -807,7 +804,7 @@ msgstr "Impossible d’obtenir l’horloge"
 msgid "Could not set address"
 msgstr "Impossible de définir l’adresse"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "Impossible de démarrer PWM"
 
@@ -1058,7 +1055,7 @@ msgstr "Format non supporté"
 msgid "Framebuffer requires %d bytes"
 msgstr "FrameBuffer nécessite %d octets"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 "La fréquence doit correspondre à PWMOut existant à l'utilisation de ce "
@@ -1141,10 +1138,13 @@ msgstr "Taille du programme d'initialisation non valide"
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 msgid "Initial set pin direction conflicts with initial out pin direction"
 msgstr ""
+"Direction initiale de \"set pin\" est en conflit avec la direction initiale "
+"de \"out pin\""
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 msgid "Initial set pin state conflicts with initial out pin state"
 msgstr ""
+"État initial de \"set pin\" est en conflit avec l'état initial de \"out pin\""
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
@@ -1296,10 +1296,6 @@ msgstr "Taille de bloc de formatage invalide"
 msgid "Invalid frequency"
 msgstr "Fréquence non valide"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "Fréquence invalide fournie"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Accès à la mémoire invalide."
@@ -1345,10 +1341,6 @@ msgstr "Broche invalide pour le canal droit"
 msgid "Invalid pins"
 msgstr "Broches invalides"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "Broches invalides pour PWMOut"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1603,18 +1595,6 @@ msgstr "Aucune clé n'a été spécifiée"
 msgid "No long integer support"
 msgstr "Pas de support pour chiffre entier long"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr "Pas de canal supplémentaire disponible"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr "Plus de minuteurs disponibles"
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "Plus de minuteurs disponibles sur cette broche."
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr "Aucun réseau avec ce ssid"
@@ -1781,10 +1761,9 @@ msgstr "PWM slice déja utilisée"
 
 #: ports/raspberrypi/common-hal/countio/Counter.c
 msgid "PWM slice channel A already in use"
-msgstr ""
+msgstr "Canal A de PWM slice est utilisé"
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus pas encore supporté"
@@ -2198,13 +2177,6 @@ msgstr "L'heure est dans le passé."
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr "Le délai est trop long : le délai maximal est de %d secondes"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-"Le minuteur est reservé pour un usage interne - déclarez la broche PWM plus "
-"tôt dans le programme"
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Pour quitter, SVP redémarrez la carte sans "
@@ -3325,7 +3297,7 @@ msgstr "arguments invalides"
 #: shared-bindings/bitmaptools/__init__.c
 #, c-format
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
-msgstr ""
+msgstr "bits_per_pixel %d est invalid, doit être 1, 4, 8, 16, 24 ou 32"
 
 #: extmod/modussl_axtls.c
 msgid "invalid cert"
@@ -3338,12 +3310,12 @@ msgstr "index invalide pour dupterm"
 #: shared-bindings/bitmaptools/__init__.c
 #, c-format
 msgid "invalid element size %d for bits_per_pixel %d\n"
-msgstr ""
+msgstr "taille d'élément %d est invalide pour bits_per_pixel %d\n"
 
 #: shared-bindings/bitmaptools/__init__.c
 #, c-format
 msgid "invalid element_size %d, must be, 1, 2, or 4"
-msgstr ""
+msgstr "element_size %d est invalide, doit être 1, 2 ou 4"
 
 #: extmod/modframebuf.c
 msgid "invalid format"
@@ -3855,6 +3827,7 @@ msgstr "pow() avec 3 arguments nécessite des entiers"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -3884,7 +3857,7 @@ msgstr "les deux boutons appuyés lors du démarrage.\n"
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 msgid "pull masks conflict with direction masks"
-msgstr ""
+msgstr "masque pull est en conflit avec les masques de direction"
 
 #: ports/raspberrypi/bindings/rp2pio/StateMachine.c
 msgid "pull_threshold must be between 1 and 32"
@@ -4385,6 +4358,34 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "Impossible d'initialiser le canal"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "Impossible d'initialiser le minuteur"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "Fréquence invalide fournie"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "Broches invalides pour PWMOut"
+
+#~ msgid "No more channels available"
+#~ msgstr "Pas de canal supplémentaire disponible"
+
+#~ msgid "No more timers available"
+#~ msgstr "Plus de minuteurs disponibles"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "Plus de minuteurs disponibles sur cette broche."
+
+#~ msgid ""
+#~ "Timer was reserved for internal use - declare PWM pins earlier in the "
+#~ "program"
+#~ msgstr ""
+#~ "Le minuteur est reservé pour un usage interne - déclarez la broche PWM "
+#~ "plus tôt dans le programme"
+
 #~ msgid "matrix dimensions do not match"
 #~ msgstr "les dimensions de la matrice ne correspondent pas"
 

locale/hi.po

@@ -338,6 +338,10 @@ msgstr ""
 msgid "All UART peripherals are in use"
 msgstr ""
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr ""
@@ -550,6 +554,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr ""
@@ -666,7 +671,7 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -748,14 +753,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -776,7 +773,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1025,7 +1022,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1253,10 +1250,6 @@ msgstr ""
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1302,10 +1295,6 @@ msgstr ""
 msgid "Invalid pins"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1558,18 +1547,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1729,7 +1706,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -2124,11 +2100,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
@@ -3737,6 +3708,7 @@ msgstr ""
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

locale/it_IT.po

@@ -350,6 +350,10 @@ msgstr "Tutte le periferiche SPI sono in uso"
 msgid "All UART peripherals are in use"
 msgstr "Tutte le periferiche I2C sono in uso"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Tutti i canali eventi utilizati"
@@ -565,6 +569,7 @@ msgstr "Buffer troppo piccolo di %d bytes"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Bus pin %d è già in uso"
@@ -683,7 +688,7 @@ msgstr "Impossibile trasferire senza i pin MOSI e MISO."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "Impossibile ricavare la grandezza scalare di sizeof inequivocabilmente"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -766,14 +771,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -794,7 +791,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1047,7 +1044,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1279,10 +1276,6 @@ msgstr ""
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1328,10 +1321,6 @@ msgstr "Pin non valido per il canale destro"
 msgid "Invalid pins"
 msgstr "Pin non validi"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1586,18 +1575,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1766,7 +1743,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -2165,11 +2141,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Per uscire resettare la scheda senza "
@@ -3803,6 +3774,7 @@ msgstr "pow() con 3 argomenti richiede interi"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

locale/ja.po

@@ -343,6 +343,10 @@ msgstr "全てのSPI周辺機器が使用中"
 msgid "All UART peripherals are in use"
 msgstr "全てのUART周辺機器が使用中"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "全てのイベントチャネルが使用中"
@@ -557,6 +561,7 @@ msgstr "バッファが %d バイト足りません"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Busピン%dはすでに使用中"
@@ -675,7 +680,7 @@ msgstr "MOSIピンとMISOピンなしに転送できません"
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "スカラのサイズを曖昧さなしに取得できません"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "使用中のタイマー上では周波数を変えられません"
 
@@ -759,14 +764,6 @@ msgstr "SDカードを初期化できません"
 msgid "Could not initialize UART"
 msgstr "UARTを初期化できません"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "チャネルを初期化できません"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "タイマーを初期化できません"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "チャネルを再初期化できません"
@@ -787,7 +784,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr "アドレスをセットできません"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "PWMをスタートできません"
 
@@ -1036,7 +1033,7 @@ msgstr "非対応の形式"
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "このタイマーを使う既存のPWMOutと周波数を一致させる必要があります"
 
@@ -1266,10 +1263,6 @@ msgstr "フォーマットチャンクのサイズが不正"
 msgid "Invalid frequency"
 msgstr "不正な周波数"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "不正な周波数が与えられました"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "不正なメモリアクセス"
@@ -1315,10 +1308,6 @@ msgstr "右チャネルのピンが不正"
 msgid "Invalid pins"
 msgstr "ピンが不正"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "PWMOutのピンが不正"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1571,18 +1560,6 @@ msgstr "キーが指定されていません"
 msgid "No long integer support"
 msgstr "long integerに対応していません"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr "使えるチャネルがもうありません"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr "使えるタイマーがもうありません"
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "このピンには使えるタイマーがもうありません"
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1745,7 +1722,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBusにはまだ対応していません"
@@ -2146,11 +2122,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr "タイムアウトが長すぎです。最大のタイムアウト長は%d秒"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
@@ -3767,6 +3738,7 @@ msgstr "pow()の第3引数には整数が必要"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4295,6 +4267,27 @@ msgstr "ziはfloat値でなければなりません"
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "チャネルを初期化できません"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "タイマーを初期化できません"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "不正な周波数が与えられました"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "PWMOutのピンが不正"
+
+#~ msgid "No more channels available"
+#~ msgstr "使えるチャネルがもうありません"
+
+#~ msgid "No more timers available"
+#~ msgstr "使えるタイマーがもうありません"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "このピンには使えるタイマーがもうありません"
+
 #~ msgid "matrix dimensions do not match"
 #~ msgstr "行列の次元が一致しません"
 

locale/ko.po

@@ -339,6 +339,10 @@ msgstr "사용중인 모든 SPI주변 기기"
 msgid "All UART peripherals are in use"
 msgstr "사용중인 모든 UART주변 기기"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr ""
@@ -553,6 +557,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr ""
@@ -669,7 +674,7 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -751,14 +756,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -779,7 +776,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1028,7 +1025,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1256,10 +1253,6 @@ msgstr "형식 청크 크기가 잘못되었습니다"
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1305,10 +1298,6 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다"
 msgid "Invalid pins"
 msgstr "핀이 유효하지 않습니다"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1561,18 +1550,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1732,7 +1709,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -2127,11 +2103,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
@@ -3741,6 +3712,7 @@ msgstr ""
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

locale/nl.po

@@ -341,6 +341,10 @@ msgstr "Alle SPI peripherals zijn in gebruik"
 msgid "All UART peripherals are in use"
 msgstr "Alle UART peripherals zijn in gebruik"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Alle event kanalen zijn in gebruik"
@@ -555,6 +559,7 @@ msgstr "Buffer is %d bytes te klein"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Bus pin %d al in gebruik"
@@ -673,7 +678,7 @@ msgstr "Kan niet overdragen zonder MOSI en MISO pinnen."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "Kan niet ondubbelzinning sizeof scalar verkrijgen"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Kan de frequentie van een timer die al in gebruik is niet variëren"
 
@@ -759,14 +764,6 @@ msgstr "Kan SDCard niet initialiseren"
 msgid "Could not initialize UART"
 msgstr "Kan UART niet initialiseren"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "Kan kanaal niet initialiseren"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "Kan timer niet initialiseren"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "Kan kanaal niet her-initialiseren"
@@ -787,7 +784,7 @@ msgstr "Kon klok niet ophalen"
 msgid "Could not set address"
 msgstr "Kan adres niet zetten"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "Kan PWM niet starten"
 
@@ -1036,7 +1033,7 @@ msgstr "Formaat wordt niet ondersteund"
 msgid "Framebuffer requires %d bytes"
 msgstr "Framebuffer benodigd %d bytes"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 "Frequentie moet overeenkomen met bestaande PWMOut bij gebruik van deze timer"
@@ -1267,10 +1264,6 @@ msgstr "Ongeldig formaat stuk grootte"
 msgid "Invalid frequency"
 msgstr "Onjuiste frequentie"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "Ongeldige frequentie opgegeven"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Ongeldig geheugen adres."
@@ -1316,10 +1309,6 @@ msgstr "Ongeldige pin voor rechter kanaal"
 msgid "Invalid pins"
 msgstr "Ongeldige pinnen"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "Ongeldige pinnen voor PWMOut"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1572,18 +1561,6 @@ msgstr "Een sleutel was niet gespecificeerd"
 msgid "No long integer support"
 msgstr "Geen lange integer ondersteuning"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr "Geen kanalen meer beschikbaar"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr "Geen timers meer beschikbaar"
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "Geen timers meer beschikbaar op deze pin."
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr "Geen netwerk met dat SSID gevonden"
@@ -1752,7 +1729,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus nog niet ondersteund"
@@ -2164,13 +2140,6 @@ msgstr "Tijdstip ligt in het verleden."
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr "Time-out is te lang. Maximale time-out lengte is %d seconden"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-"Timer is gereserveerd voor intern gebruik - wijs PWM pins eerder in het "
-"programma toe"
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Om te beëindigen, reset het bord zonder "
@@ -3799,6 +3768,7 @@ msgstr "pow() met 3 argumenten vereist integers"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4328,6 +4298,34 @@ msgstr "zi moet van type float zijn"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi moet vorm (n_section, 2) hebben"
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "Kan kanaal niet initialiseren"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "Kan timer niet initialiseren"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "Ongeldige frequentie opgegeven"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "Ongeldige pinnen voor PWMOut"
+
+#~ msgid "No more channels available"
+#~ msgstr "Geen kanalen meer beschikbaar"
+
+#~ msgid "No more timers available"
+#~ msgstr "Geen timers meer beschikbaar"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "Geen timers meer beschikbaar op deze pin."
+
+#~ msgid ""
+#~ "Timer was reserved for internal use - declare PWM pins earlier in the "
+#~ "program"
+#~ msgstr ""
+#~ "Timer is gereserveerd voor intern gebruik - wijs PWM pins eerder in het "
+#~ "programma toe"
+
 #~ msgid "matrix dimensions do not match"
 #~ msgstr "matrix afmetingen komen niet overeen"
 

locale/pl.po

@@ -343,6 +343,10 @@ msgstr "Wszystkie peryferia SPI w użyciu"
 msgid "All UART peripherals are in use"
 msgstr "Wszystkie peryferia UART w użyciu"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Wszystkie kanały zdarzeń w użyciu"
@@ -557,6 +561,7 @@ msgstr "Bufor za krótki o %d bajtów"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Nóżka magistrali %d jest w użyciu"
@@ -673,7 +678,7 @@ msgstr "Nie można przesyłać bez nóżek MOSI i MISO."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "Wielkość skalara jest niejednoznaczna"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Nie można zmieniać częstotliwości timera, który jest już używany"
 
@@ -759,14 +764,6 @@ msgstr "Nie można zainicjować SDCard"
 msgid "Could not initialize UART"
 msgstr "Ustawienie UART nie powiodło się"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "Nie można zainicjować kanału"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "Nie można zainicjować timera"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "Nie można ponownie zainicjować kanału"
@@ -787,7 +784,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr "Nie można ustawić adresu"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "Nie można uruchomić PWM"
 
@@ -1036,7 +1033,7 @@ msgstr "Nie wspierany format"
 msgid "Framebuffer requires %d bytes"
 msgstr "Bufor ramki wymaga %d bajtów"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1266,10 +1263,6 @@ msgstr "Zła wielkość fragmentu formatu"
 msgid "Invalid frequency"
 msgstr "Nieprawidłowa częstotliwość"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "Podano nieprawidłową częstotliwość"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Nieprawidłowy dostęp do pamięci."
@@ -1315,10 +1308,6 @@ msgstr "Zła nóżka dla prawego kanału"
 msgid "Invalid pins"
 msgstr "Złe nóżki"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "Nieprawidłowe piny dla PWMOut"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1572,18 +1561,6 @@ msgstr "Nie określono klucza"
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr "Brak dostępnych kanałów"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -1743,7 +1720,6 @@ msgid "PWM slice channel A already in use"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus nie jest jeszcze obsługiwany"
@@ -2138,11 +2114,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "By wyjść, proszę zresetować płytkę bez "
@@ -3759,6 +3730,7 @@ msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4287,6 +4259,21 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "Nie można zainicjować kanału"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "Nie można zainicjować timera"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "Podano nieprawidłową częstotliwość"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "Nieprawidłowe piny dla PWMOut"
+
+#~ msgid "No more channels available"
+#~ msgstr "Brak dostępnych kanałów"
+
 #~ msgid "vectors must have same lengths"
 #~ msgstr "wektory muszą mieć identyczną długość"
 

locale/pt_BR.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-03-17 21:24+0000\n"
+"PO-Revision-Date: 2021-03-21 21:29+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -351,6 +351,10 @@ msgstr "Todos os periféricos SPI estão em uso"
 msgid "All UART peripherals are in use"
 msgstr "Todos os periféricos UART estão em uso"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr "Todos os canais estão em uso"
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Todos os canais de eventos em uso"
@@ -569,6 +573,7 @@ msgstr "O buffer é muito curto em %d bytes"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "O pino bus %d já está em uso"
@@ -691,7 +696,7 @@ msgstr "Não é possível transferir sem os pinos MOSI e MISO."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "Não é possível obter inequivocamente o tamanho do escalar"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Não é possível variar a frequência em um timer que já esteja em uso"
 
@@ -777,14 +782,6 @@ msgstr "Não foi possível inicializar o SDCard"
 msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "Não foi possível inicializar o canal"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "Não foi possível inicializar o temporizador"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "Não foi possível reiniciar o canal"
@@ -805,7 +802,7 @@ msgstr "Não foi possível recuperar o clock"
 msgid "Could not set address"
 msgstr "Não foi possível definir o endereço"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "Não foi possível iniciar o PWM"
 
@@ -1054,7 +1051,7 @@ msgstr "O formato não é suportado"
 msgid "Framebuffer requires %d bytes"
 msgstr "O Framebuffer requer %d bytes"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 "A frequência deve coincidir com o PWMOut existente usando este temporizador"
@@ -1291,10 +1288,6 @@ msgstr "Tamanho do pedaço de formato inválido"
 msgid "Invalid frequency"
 msgstr "Frequência inválida"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "A frequência informada é inválida"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "O acesso da memória é inválido."
@@ -1340,10 +1333,6 @@ msgstr "Pino inválido para canal direito"
 msgid "Invalid pins"
 msgstr "Pinos inválidos"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "Os pinos para o PWMOut são inválidos"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1596,18 +1585,6 @@ msgstr "Nenhuma chave foi definida"
 msgid "No long integer support"
 msgstr "Não há compatibilidade com inteiro longo"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr "Não há mais canais disponíveis"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr "Não há mais temporizadores disponíveis"
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "Não há mais temporizadores disponíveis neste pino."
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr "Não há rede com este ssid"
@@ -1778,7 +1755,6 @@ msgid "PWM slice channel A already in use"
 msgstr "O canal A da fatia do PWM já está em uso"
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "O ParallelBus ainda não é compatível"
@@ -2197,13 +2173,6 @@ msgstr ""
 "O tempo limite é long demais: O comprimento máximo do tempo limite é de %d "
 "segundos"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-"O temporizador foi reservado para uso interno - declare os pinos PWM no "
-"início do programa"
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Para sair, por favor, reinicie a placa sem "
@@ -3845,6 +3814,7 @@ msgstr "o pow() com 3 argumentos requer números inteiros"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4374,6 +4344,34 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "Não foi possível inicializar o canal"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "Não foi possível inicializar o temporizador"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "A frequência informada é inválida"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "Os pinos para o PWMOut são inválidos"
+
+#~ msgid "No more channels available"
+#~ msgstr "Não há mais canais disponíveis"
+
+#~ msgid "No more timers available"
+#~ msgstr "Não há mais temporizadores disponíveis"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "Não há mais temporizadores disponíveis neste pino."
+
+#~ msgid ""
+#~ "Timer was reserved for internal use - declare PWM pins earlier in the "
+#~ "program"
+#~ msgstr ""
+#~ "O temporizador foi reservado para uso interno - declare os pinos PWM no "
+#~ "início do programa"
+
 #~ msgid "matrix dimensions do not match"
 #~ msgstr "as dimensões da matriz não coincidem"
 

locale/sv.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-03-17 21:24+0000\n"
+"PO-Revision-Date: 2021-03-19 20:36+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -346,6 +346,10 @@ msgstr "All SPI-kringutrustning används"
 msgid "All UART peripherals are in use"
 msgstr "Alla UART-kringutrustning används"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr "Alla kanaler används"
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Alla händelsekanaler används"
@@ -560,6 +564,7 @@ msgstr "Buffert är %d bytes för kort"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Busspinne %d används redan"
@@ -679,7 +684,7 @@ msgstr "Kan inte överföra utan MOSI- och MISO-pinnar."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "Kan inte entydigt få sizeof scalar"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Det går inte att ändra frekvensen på en timer som redan används"
 
@@ -765,14 +770,6 @@ msgstr "Kan inte initiera SD-kort"
 msgid "Could not initialize UART"
 msgstr "Det gick inte att initiera UART"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "Det gick inte att initiera kanalen"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "Det gick inte att initialisera timern"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "Det gick inte att återinitiera kanalen"
@@ -793,7 +790,7 @@ msgstr "Kunde inte hämta klocka"
 msgid "Could not set address"
 msgstr "Kan inte ange adress"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "Det gick inte att starta PWM"
 
@@ -1042,7 +1039,7 @@ msgstr "Formatet stöds inte"
 msgid "Framebuffer requires %d bytes"
 msgstr "Framebuffer kräver %d byte"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "Frekvensen måste matcha befintlig PWMOut med denna timer"
 
@@ -1274,10 +1271,6 @@ msgstr "Ogiltig formatsegmentstorlek"
 msgid "Invalid frequency"
 msgstr "Ogiltig frekvens"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "Ogiltig frekvens angiven"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Ogiltig minnesåtkomst."
@@ -1323,10 +1316,6 @@ msgstr "Ogiltig pinne för höger kanal"
 msgid "Invalid pins"
 msgstr "Ogiltiga pinnar"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "Ogiltiga pinnar för PWMOut"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1580,18 +1569,6 @@ msgstr "Ingen nyckel angavs"
 msgid "No long integer support"
 msgstr "Inget stöd för långt heltal"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr "Inga fler kanaler tillgängliga"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr "Ingen timer tillgänglig"
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "Inga fler timers tillgängliga på denna pinne."
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr "Inget nätverk med sådant ssid"
@@ -1758,7 +1735,6 @@ msgid "PWM slice channel A already in use"
 msgstr "PWM-segmentkanal A används redan"
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus stöds ännu inte"
@@ -2170,13 +2146,6 @@ msgstr "Tid har passerats."
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr "Åtgärden tog för lång tid: Max väntetid är %d sekunder"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-"Timern är reserverad för internt bruk - deklarera PWM-pinne tidigare i "
-"programmet"
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "För att avsluta, gör reset på kortet utan "
@@ -3802,6 +3771,7 @@ msgstr "pow() med 3 argument kräver heltal"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4331,6 +4301,34 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "Det gick inte att initiera kanalen"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "Det gick inte att initialisera timern"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "Ogiltig frekvens angiven"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "Ogiltiga pinnar för PWMOut"
+
+#~ msgid "No more channels available"
+#~ msgstr "Inga fler kanaler tillgängliga"
+
+#~ msgid "No more timers available"
+#~ msgstr "Ingen timer tillgänglig"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "Inga fler timers tillgängliga på denna pinne."
+
+#~ msgid ""
+#~ "Timer was reserved for internal use - declare PWM pins earlier in the "
+#~ "program"
+#~ msgstr ""
+#~ "Timern är reserverad för internt bruk - deklarera PWM-pinne tidigare i "
+#~ "programmet"
+
 #~ msgid "matrix dimensions do not match"
 #~ msgstr "matrisdimensioner matchar inte"
 

locale/zh_Latn_pinyin.po

@@ -348,6 +348,10 @@ msgstr "Suǒyǒu SPI wàiwéi qì zhèngzài shǐyòng"
 msgid "All UART peripherals are in use"
 msgstr "Suǒyǒu UART wàiwéi zhèngzài shǐyòng"
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr "Suǒyǒu shǐyòng de shìjiàn píndào"
@@ -562,6 +566,7 @@ msgstr "Huǎn chōng qū tài duǎn ， àn %d zì jié"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #, c-format
 msgid "Bus pin %d is already in use"
 msgstr "Zǒngxiàn yǐn jiǎo %d yǐ zài shǐyòng zhōng"
@@ -680,7 +685,7 @@ msgstr "Méiyǒu MOSI/MISO jiù wúfǎ zhuǎnyí."
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr "Wúfǎ míngquè de huòdé biāoliàng de dàxiǎo"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Wúfǎ gēnggǎi yǐ zài shǐyòng de jìshí qì shàng de pínlǜ"
 
@@ -764,14 +769,6 @@ msgstr "wú fǎ chū shǐ huà SDCard"
 msgid "Could not initialize UART"
 msgstr "Wúfǎ chūshǐhuà UART"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr "Wúfǎ chūshǐhuà píndào"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr "Wúfǎ chūshǐhuà jìshí qì"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr "Wúfǎ chóngxīn chūshǐhuà píndào"
@@ -792,7 +789,7 @@ msgstr "Wúfǎ huòqǔ shízhōng"
 msgid "Could not set address"
 msgstr "wú fǎ shè zhì dì zhǐ"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr "Wúfǎ qǐdòng PWM"
 
@@ -1041,7 +1038,7 @@ msgstr "Bù zhīyuán géshì"
 msgid "Framebuffer requires %d bytes"
 msgstr "zhēn huǎn chōng qū xū yào %d zì jié"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "Pínlǜ bìxū yǔ shǐyòng cǐ jìshí qì de xiàn yǒu PWMOut xiāng pǐpèi"
 
@@ -1276,10 +1273,6 @@ msgstr "Géshì kuài dàxiǎo wúxiào"
 msgid "Invalid frequency"
 msgstr "Wúxiào de pínlǜ"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr "Tígōng de pínlǜ wúxiào"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Wúxiào de nèicún fǎngwèn."
@@ -1325,10 +1318,6 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào"
 msgid "Invalid pins"
 msgstr "Wúxiào de yǐn jiǎo"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr "PWMOut de yǐn jiǎo wú xiào"
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1582,18 +1571,6 @@ msgstr "Wèi zhǐdìng mì yào"
 msgid "No long integer support"
 msgstr "Méiyǒu zhǎng zhěngshù zhīchí"
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr "Méiyǒu gèng duō kěyòng píndào"
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr "Méiyǒu gèng duō kěyòng de jìshí qì"
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì."
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr "Méiyǒu wǎngluò yǔ gāi ssid"
@@ -1759,7 +1736,6 @@ msgid "PWM slice channel A already in use"
 msgstr "PWM qiē piàn tōng dào A yǐ zài shǐ yòng zhōng"
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "Shàng bù zhīchí ParallelBus"
@@ -2167,13 +2143,6 @@ msgstr "shí jiān yǐ jīng guò qù."
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr "Chāoshí shíjiān tài zhǎng: Zuìdà chāoshí shíjiān wèi%d miǎo"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-"Dìngshí qì bǎoliú gōng nèibù shǐyòng-zài chéngxù de qiánmiàn shēngmíng PWM "
-"yǐn jiǎo"
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Yào tuìchū, qǐng chóng zhì bǎnkuài ér bùyòng "
@@ -3798,6 +3767,7 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
@@ -4327,6 +4297,34 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 
+#~ msgid "Could not initialize channel"
+#~ msgstr "Wúfǎ chūshǐhuà píndào"
+
+#~ msgid "Could not initialize timer"
+#~ msgstr "Wúfǎ chūshǐhuà jìshí qì"
+
+#~ msgid "Invalid frequency supplied"
+#~ msgstr "Tígōng de pínlǜ wúxiào"
+
+#~ msgid "Invalid pins for PWMOut"
+#~ msgstr "PWMOut de yǐn jiǎo wú xiào"
+
+#~ msgid "No more channels available"
+#~ msgstr "Méiyǒu gèng duō kěyòng píndào"
+
+#~ msgid "No more timers available"
+#~ msgstr "Méiyǒu gèng duō kěyòng de jìshí qì"
+
+#~ msgid "No more timers available on this pin."
+#~ msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì."
+
+#~ msgid ""
+#~ "Timer was reserved for internal use - declare PWM pins earlier in the "
+#~ "program"
+#~ msgstr ""
+#~ "Dìngshí qì bǎoliú gōng nèibù shǐyòng-zài chéngxù de qiánmiàn shēngmíng "
+#~ "PWM yǐn jiǎo"
+
 #~ msgid "matrix dimensions do not match"
 #~ msgstr "jǔzhèn chǐcùn bù pǐpèi"
 

ports/atmel-samd/boards/rotary_trinkey_m0/board.c

@@ -0,0 +1,40 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "common-hal/microcontroller/Pin.h"
+#include "supervisor/shared/board.h"
+#include "hal/include/hal_gpio.h"
+
+void board_init(void) {
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}

ports/atmel-samd/boards/rotary_trinkey_m0/mpconfigboard.h

@@ -0,0 +1,54 @@
+#define MICROPY_HW_BOARD_NAME "Adafruit Rotary Trinkey M0"
+#define MICROPY_HW_MCU_NAME "samd21e18"
+
+#define MICROPY_HW_NEOPIXEL (&pin_PA01)
+
+#define MICROPY_PORT_A        (0)
+#define MICROPY_PORT_B        (0)
+#define MICROPY_PORT_C        (0)
+
+#define IGNORE_PIN_PA02     1
+#define IGNORE_PIN_PA03     1
+#define IGNORE_PIN_PA05     1
+#define IGNORE_PIN_PA08     1
+#define IGNORE_PIN_PA09     1
+#define IGNORE_PIN_PA10     1
+#define IGNORE_PIN_PA11     1
+#define IGNORE_PIN_PA12     1
+#define IGNORE_PIN_PA13     1
+#define IGNORE_PIN_PA14     1
+#define IGNORE_PIN_PA15     1
+#define IGNORE_PIN_PA16     1
+#define IGNORE_PIN_PA17     1
+#define IGNORE_PIN_PA18     1
+#define IGNORE_PIN_PA19     1
+#define IGNORE_PIN_PA20     1
+#define IGNORE_PIN_PA21     1
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
+#define IGNORE_PIN_PA28     1
+#define IGNORE_PIN_PA30     1
+#define IGNORE_PIN_PA31     1
+#define IGNORE_PIN_PB00     1
+#define IGNORE_PIN_PB01     1
+#define IGNORE_PIN_PB02     1
+#define IGNORE_PIN_PB03     1
+#define IGNORE_PIN_PB04     1
+#define IGNORE_PIN_PB05     1
+#define IGNORE_PIN_PB06     1
+#define IGNORE_PIN_PB07     1
+#define IGNORE_PIN_PB08     1
+#define IGNORE_PIN_PB09     1
+#define IGNORE_PIN_PB10     1
+#define IGNORE_PIN_PB11     1
+#define IGNORE_PIN_PB12     1
+#define IGNORE_PIN_PB13     1
+#define IGNORE_PIN_PB14     1
+#define IGNORE_PIN_PB15     1
+#define IGNORE_PIN_PB16     1
+#define IGNORE_PIN_PB17     1
+#define IGNORE_PIN_PB22     1
+#define IGNORE_PIN_PB23     1
+#define IGNORE_PIN_PB30     1
+#define IGNORE_PIN_PB31     1

ports/atmel-samd/boards/rotary_trinkey_m0/mpconfigboard.mk

@@ -0,0 +1,34 @@
+USB_VID = 0x239A
+USB_PID = 0x80FC
+USB_PRODUCT = "Rotary Trinkey M0"
+USB_MANUFACTURER = "Adafruit Industries LLC"
+
+CHIP_VARIANT = SAMD21E18A
+CHIP_FAMILY = samd21
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = NONE
+
+CIRCUITPY_ANALOGIO = 0
+CIRCUITPY_ROTARYIO = 1
+CIRCUITPY_RTC = 0
+CIRCUITPY_SAMD = 0
+CIRCUITPY_PS2IO = 0
+CIRCUITPY_PULSEIO = 0
+CIRCUITPY_PWMIO = 0
+CIRCUITPY_AUDIOCORE = 0
+CIRCUITPY_BUSIO = 0
+CIRCUITPY_STORAGE = 0
+
+CIRCUITPY_MATH = 0
+CIRCUITPY_PIXELBUF = 1
+CIRCUITPY_USB_MIDI = 1
+CIRCUITPY_TOUCHIO = 0
+CIRCUITPY_FULL_BUILD = 0
+
+SUPEROPT_GC = 0
+SUPEROPT_VM = 0
+
+# Include these Python libraries in firmware.
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_HID

ports/atmel-samd/boards/rotary_trinkey_m0/pins.c

@@ -0,0 +1,9 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA01) },
+    { MP_ROM_QSTR(MP_QSTR_ROTB), MP_ROM_PTR(&pin_PA00) },
+    { MP_ROM_QSTR(MP_QSTR_ROTA), MP_ROM_PTR(&pin_PA06) },
+    { MP_ROM_QSTR(MP_QSTR_SWITCH), MP_ROM_PTR(&pin_PA27) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

ports/esp32s2/boards/adafruit_funhouse/board.c

@@ -0,0 +1,123 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+
+#include "shared-bindings/busio/SPI.h"
+#include "shared-bindings/displayio/FourWire.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+
+#include "esp_log.h"
+
+displayio_fourwire_obj_t board_display_obj;
+
+#define DELAY 0x80
+
+uint8_t display_init_sequence[] = {
+    0x01, 0 | DELAY, 150, // SWRESET
+    0x11, 0 | DELAY, 255, // SLPOUT
+    0x36, 1, 0b10100000,  // _MADCTL for rotation 0
+    0x3a, 1, 0x55, // COLMOD - 16bit color
+    0x21, 0 | DELAY, 10,                 // _INVON
+    0x13, 0 | DELAY, 10,                 // _NORON
+    0x29, 0 | DELAY, 255,                // _DISPON
+};
+
+void board_init(void) {
+    // USB
+    common_hal_never_reset_pin(&pin_GPIO19);
+    common_hal_never_reset_pin(&pin_GPIO20);
+
+    // Debug UART
+#ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO37);
+    common_hal_never_reset_pin(&pin_GPIO38);
+#endif /* DEBUG */
+
+    busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus;
+    common_hal_busio_spi_construct(spi, &pin_GPIO36, &pin_GPIO35, NULL);
+    common_hal_busio_spi_never_reset(spi);
+
+    displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
+    bus->base.type = &displayio_fourwire_type;
+    common_hal_displayio_fourwire_construct(bus,
+        spi,
+        &pin_GPIO39, // TFT_DC Command or data
+        &pin_GPIO40, // TFT_CS Chip select
+        &pin_GPIO41, // TFT_RESET Reset
+        60000000, // Baudrate
+        0, // Polarity
+        0); // Phase
+
+    // workaround as board_init() is called before reset_port() in main.c
+    pwmout_reset();
+
+    displayio_display_obj_t* display = &displays[0].display;
+    display->base.type = &displayio_display_type;
+    common_hal_displayio_display_construct(
+        display,
+        bus,
+        240, // Width (after rotation)
+        240, // Height (after rotation)
+        80, // column start
+        0, // row start
+        270, // rotation
+        16, // Color depth
+        false, // Grayscale
+        false, // Pixels in a byte share a row. Only used for depth < 8
+        1, // bytes per cell. Only valid for depths < 8
+        false, // reverse_pixels_in_byte. Only valid for depths < 8
+        true, // reverse_pixels_in_word
+        MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
+        MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
+        MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
+        0x37, // set vertical scroll command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        &pin_GPIO21,  // backlight pin
+        NO_BRIGHTNESS_COMMAND,
+        1.0f, // brightness (ignored)
+        true, // auto_brightness
+        false, // single_byte_bounds
+        false, // data_as_commands
+        true, // auto_refresh
+        60, // native_frames_per_second
+        true, // backlight_on_high
+        false); // not SH1107
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}
+
+void board_deinit(void) {
+}

ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h

@@ -0,0 +1,42 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+//Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Adafruit FunHome"
+#define MICROPY_HW_MCU_NAME         "ESP32S2"
+
+#define MICROPY_HW_APA_MOSI (&pin_GPIO14)
+#define MICROPY_HW_APA_SCK (&pin_GPIO15)
+
+#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
+
+#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
+
+#define AUTORESET_DELAY_MS 500
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO33)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO34)

ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.mk

@@ -0,0 +1,17 @@
+USB_VID = 0x239A
+USB_PID = 0x80FA
+USB_PRODUCT = "FunHouse"
+USB_MANUFACTURER = "Adafruit"
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE=dio
+CIRCUITPY_ESP_FLASH_FREQ=40m
+CIRCUITPY_ESP_FLASH_SIZE=4MB
+
+CIRCUITPY_MODULE=wrover

ports/esp32s2/boards/adafruit_funhouse/pins.c

@@ -0,0 +1,51 @@
+#include "shared-bindings/board/__init__.h"
+
+#include "shared-module/displayio/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+
+    { MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_MOSI), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_SCK), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON_DOWN), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON_SELECT), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON_UP), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_CAP6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_CAP7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_CAP8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_CAP9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_CAP10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_CAP11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_CAP12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_CAP13), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_DOTSTAR_DATA), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_DOTSTAR_CLOCK), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_PIR_SENSE), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO42) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO37) },
+
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO34) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_DEBUG_TX), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_DEBUG_RX), MP_ROM_PTR(&pin_GPIO38) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)},
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

ports/esp32s2/boards/adafruit_funhouse/sdkconfig

@@ -0,0 +1,33 @@
+CONFIG_ESP32S2_SPIRAM_SUPPORT=y
+
+#
+# SPI RAM config
+#
+# CONFIG_SPIRAM_TYPE_AUTO is not set
+CONFIG_SPIRAM_TYPE_ESPPSRAM16=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
+CONFIG_SPIRAM_SIZE=2097152
+
+#
+# PSRAM clock and cs IO for ESP32S2
+#
+CONFIG_DEFAULT_PSRAM_CLK_IO=30
+CONFIG_DEFAULT_PSRAM_CS_IO=26
+# end of PSRAM clock and cs IO for ESP32S2
+
+# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
+# CONFIG_SPIRAM_RODATA is not set
+# CONFIG_SPIRAM_SPEED_80M is not set
+CONFIG_SPIRAM_SPEED_40M=y
+# CONFIG_SPIRAM_SPEED_26M is not set
+# CONFIG_SPIRAM_SPEED_20M is not set
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
+# end of SPI RAM config

ports/esp32s2/common-hal/pwmio/PWMOut.c

@@ -92,8 +92,8 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,
         }
     }
     if (timer_index == INDEX_EMPTY) {
-        // Running out of timers isn't pin related on ESP32S2 so we can't re-use error messages
+        // Running out of timers isn't pin related on ESP32S2.
-        mp_raise_ValueError(translate("No more timers available"));
+        return PWMOUT_ALL_TIMERS_IN_USE;
     }
 
     // Find a viable channel
@@ -104,7 +104,7 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,
         }
     }
     if (channel_index == INDEX_EMPTY) {
-        mp_raise_ValueError(translate("No more channels available"));
+        return PWMOUT_ALL_CHANNELS_IN_USE;
     }
 
     // Run configuration
@@ -115,7 +115,7 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,
     self->tim_handle.clk_cfg = LEDC_AUTO_CLK;
 
     if (ledc_timer_config(&(self->tim_handle)) != ESP_OK) {
-        mp_raise_ValueError(translate("Could not initialize timer"));
+        return PWMOUT_INITIALIZATION_ERROR;
     }
 
     self->chan_handle.channel = channel_index;
@@ -126,7 +126,7 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,
     self->chan_handle.timer_sel = timer_index;
 
     if (ledc_channel_config(&(self->chan_handle))) {
-        mp_raise_ValueError(translate("Could not initialize channel"));
+        return PWMOUT_INITIALIZATION_ERROR;
     }
 
     // Make reservations
@@ -148,6 +148,8 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,
 void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self) {
     never_reset_tim[self->tim_handle.timer_num] = true;
     never_reset_chan[self->chan_handle.channel] = true;
+
+    never_reset_pin_number(self->pin_number);
 }
 
 void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self) {

ports/mimxrt10xx/boards/imxrt1010_evk/pins.c

@@ -7,12 +7,9 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
     { MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO_10) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO_AD_05) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO_AD_06) },
-    { MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO_08) },
-    { MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO_01) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO_AD_01) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO_AD_02) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO_SD_02) },
-    { MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO_03) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO_AD_05) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO_AD_04) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO_AD_03) },

ports/mimxrt10xx/boards/metro_m7_1011/flash_config.c

@@ -36,7 +36,7 @@ const BOOT_DATA_T boot_data = {
     0xFFFFFFFF                /* empty - extra data word */
 };
 
-// Config for W25Q16JV with QSPI routed.
+// Config for W25Q32JV with QSPI routed. (compatible with GD25Q32)
 __attribute__((section(".boot_hdr.conf")))
 const flexspi_nor_config_t qspiflash_config = {
     .pageSize = 256u,

ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.h

@@ -7,7 +7,7 @@
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 0
 
-#define BOARD_FLASH_SIZE (2 * 1024 * 1024)
+#define BOARD_FLASH_SIZE (4 * 1024 * 1024)
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO_02)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO_01)

ports/mimxrt10xx/common-hal/microcontroller/__init__.c

@@ -39,6 +39,8 @@
 #include "supervisor/shared/safe_mode.h"
 #include "supervisor/shared/translate.h"
 
+#define DBL_TAP_REG              SNVS->LPGPR[3]
+
 void common_hal_mcu_delay_us(uint32_t delay) {
     mp_hal_delay_us(delay);
 }
@@ -72,10 +74,10 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
         }
         // Pretend to be the first of the two reset presses needed to enter the
         // bootloader. That way one reset will end in the bootloader.
-        SNVS->LPGPR[0] = DBL_TAP_MAGIC;
+        DBL_TAP_REG = DBL_TAP_MAGIC;
     } else {
         // Set up the default.
-        SNVS->LPGPR[0] = DBL_TAP_MAGIC_QUICK_BOOT;
+        DBL_TAP_REG = DBL_TAP_MAGIC_QUICK_BOOT;
     }
     if (runmode == RUNMODE_SAFE_MODE) {
         safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);

ports/raspberrypi/boards/adafruit_itsybitsy_rp2040/board.c

@@ -0,0 +1,44 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+
+#include "shared-bindings/microcontroller/Pin.h"
+#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h"
+
+void board_init(void) {
+    common_hal_never_reset_pin(&pin_GPIO16);
+    gpio_init(16);
+    gpio_set_dir(16, GPIO_OUT);
+    gpio_put(16, true);
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}

ports/raspberrypi/boards/adafruit_itsybitsy_rp2040/mpconfigboard.h

@@ -0,0 +1,14 @@
+#define MICROPY_HW_BOARD_NAME "Adafruit ItsyBitsy RP2040"
+#define MICROPY_HW_MCU_NAME "rp2040"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO17)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO3)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO18)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO19)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO20)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO1)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO0)

ports/raspberrypi/boards/adafruit_itsybitsy_rp2040/mpconfigboard.mk

@@ -0,0 +1,9 @@
+USB_VID = 0x239A
+USB_PID = 0x80FE
+USB_PRODUCT = "ItsyBitsy RP2040"
+USB_MANUFACTURER = "Adafruit"
+
+CHIP_VARIANT = RP2040
+CHIP_FAMILY = rp2
+
+EXTERNAL_FLASH_DEVICES = "W25Q64JV_IQ"

ports/raspberrypi/boards/adafruit_itsybitsy_rp2040/pins.c

@@ -0,0 +1,43 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO28) },
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO29) },
+    { MP_ROM_QSTR(MP_QSTR_D24), MP_ROM_PTR(&pin_GPIO24) },
+    { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO25) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO20) },
+
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO14) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

ports/raspberrypi/boards/adafruit_qtpy_rp2040/mpconfigboard.h

@@ -10,5 +10,5 @@
 #define DEFAULT_SPI_BUS_MOSI (&pin_GPIO3)
 #define DEFAULT_SPI_BUS_MISO (&pin_GPIO4)
 
-// #define DEFAULT_UART_BUS_RX (&pin_PA11)
+#define DEFAULT_UART_BUS_RX (&pin_GPIO5)
-// #define DEFAULT_UART_BUS_TX (&pin_PA10)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO20)

ports/raspberrypi/boards/adafruit_qtpy_rp2040/mpconfigboard.mk

@@ -6,4 +6,4 @@ USB_MANUFACTURER = "Adafruit"
 CHIP_VARIANT = RP2040
 CHIP_FAMILY = rp2
 
-EXTERNAL_FLASH_DEVICES = "W25Q32JV_IQ"
+EXTERNAL_FLASH_DEVICES = "W25Q64JV_IQ"

ports/raspberrypi/boards/adafruit_qtpy_rp2040/pins.c

@@ -22,8 +22,8 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO20) },
     { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO20) },
 
-    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO5) },
-    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO5) },
 
     { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO6) },
     { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO6) },
@@ -37,13 +37,13 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO12) },
     { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO11) },
 
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO21) },
 
     { MP_ROM_QSTR(MP_QSTR_SDA1), MP_ROM_PTR(&pin_GPIO22) },
     { MP_ROM_QSTR(MP_QSTR_SCL1), MP_ROM_PTR(&pin_GPIO23) },
 
-
     { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
     { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
-    // { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
 };
 MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

ports/stm/common-hal/pwmio/PWMOut.c

@@ -48,7 +48,7 @@ STATIC uint32_t timer_get_internal_duty(uint16_t duty, uint32_t period) {
     return (duty * period) / ((1 << 16) - 1);
 }
 
-STATIC void timer_get_optimal_divisors(uint32_t *period, uint32_t *prescaler,
+STATIC bool timer_get_optimal_divisors(uint32_t *period, uint32_t *prescaler,
     uint32_t frequency, uint32_t source_freq) {
     // Find the largest possible period supported by this frequency
     for (int i = 0; i < (1 << 16); i++) {
@@ -58,9 +58,8 @@ STATIC void timer_get_optimal_divisors(uint32_t *period, uint32_t *prescaler,
             break;
         }
     }
-    if (*prescaler == 0) {
+    // Return success or failure.
-        mp_raise_ValueError(translate("Invalid frequency supplied"));
+    return *prescaler != 0;
-    }
 }
 
 void pwmout_reset(void) {
@@ -138,16 +137,14 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,
         tim_frequencies[self->tim->tim_index - 1] = frequency;
         stm_peripherals_timer_reserve(TIMx);
     } else { // no match found
-        if (tim_chan_taken) {
+        if (tim_chan_taken || tim_taken_internal) {
-            mp_raise_ValueError(translate("No more timers available on this pin."));
+            return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE;
-        } else if (tim_taken_internal) {
-            mp_raise_ValueError(translate("Timer was reserved for internal use - declare PWM pins earlier in the program"));
         } else if (tim_taken_f_mismatch) {
-            mp_raise_ValueError(translate("Frequency must match existing PWMOut using this timer"));
+            return PWMOUT_INVALID_FREQUENCY_ON_PIN;
         } else if (var_freq_mismatch) {
-            mp_raise_ValueError(translate("Cannot vary frequency on a timer that is already in use"));
+            return PWMOUT_VARIABLE_FREQUENCY_NOT_AVAILABLE;
         } else {
-            mp_raise_ValueError(translate("Invalid pins for PWMOut"));
+            return PWMOUT_INVALID_PIN;
         }
     }
 
@@ -167,7 +164,9 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,
     uint32_t prescaler = 0; // prescaler is 15 bit
     uint32_t period = 0; // period is 16 bit
     uint32_t source_freq = stm_peripherals_timer_get_source_freq(TIMx);
-    timer_get_optimal_divisors(&period, &prescaler, frequency, source_freq);
+    if (!timer_get_optimal_divisors(&period, &prescaler, frequency, source_freq)) {
+        return PWMOUT_INVALID_FREQUENCY;
+    }
 
     // Timer init
     self->handle.Instance = TIMx;
@@ -180,20 +179,20 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,
     // only run init if this is the first instance of this timer
     if (first_time_setup) {
         if (HAL_TIM_PWM_Init(&self->handle) != HAL_OK) {
-            mp_raise_ValueError(translate("Could not initialize timer"));
+            return PWMOUT_INITIALIZATION_ERROR;
         }
     }
 
-    // Channel/PWM init
+    //Channel/PWM init
     self->chan_handle.OCMode = TIM_OCMODE_PWM1;
     self->chan_handle.Pulse = timer_get_internal_duty(duty, period);
     self->chan_handle.OCPolarity = TIM_OCPOLARITY_HIGH;
     self->chan_handle.OCFastMode = TIM_OCFAST_DISABLE;
     if (HAL_TIM_PWM_ConfigChannel(&self->handle, &self->chan_handle, self->channel) != HAL_OK) {
-        mp_raise_ValueError(translate("Could not initialize channel"));
+        return PWMOUT_INITIALIZATION_ERROR;
     }
     if (HAL_TIM_PWM_Start(&self->handle, self->channel) != HAL_OK) {
-        mp_raise_ValueError(translate("Could not start PWM"));
+        return PWMOUT_INITIALIZATION_ERROR;
     }
 
     self->variable_frequency = variable_frequency;

shared-bindings/bitmaptools/__init__.c

@@ -361,20 +361,20 @@ MP_DEFINE_CONST_FUN_OBJ_KW(bitmaptools_draw_line_obj, 0, bitmaptools_obj_draw_li
 //| def arrayblit(bitmap: displayio.Bitmap, data: ReadableBuffer, x1: int=0, y1: int=0, x2: Optional[int]=None, y2: Optional[int]=None, skip_index:Optional[int]=None) -> None:
 //|     """Inserts pixels from ``data`` into the rectangle of width×height pixels with the upper left corner at ``(x,y)``
 //|
-//| The values from ``data`` are taken modulo the number of color values
+//|     The values from ``data`` are taken modulo the number of color values
-//| avalable in the destination bitmap.
+//|     avalable in the destination bitmap.
 //|
-//| If x1 or y1 are not specified, they are taken as 0.  If x2 or y2
+//|     If x1 or y1 are not specified, they are taken as 0.  If x2 or y2
-//| are not specified, or are given as -1, they are taken as the width
+//|     are not specified, or are given as -1, they are taken as the width
-//| and height of the image.
+//|     and height of the image.
 //|
-//| The coordinates affected by the blit are ``x1 <= x < x2`` and ``y1 <= y < y2``.
+//|     The coordinates affected by the blit are ``x1 <= x < x2`` and ``y1 <= y < y2``.
 //|
-//| ``data`` must contain at least as many elements as required.  If it
+//|     ``data`` must contain at least as many elements as required.  If it
-//| contains excess elements, they are ignored.
+//|     contains excess elements, they are ignored.
 //|
-//| The blit takes place by rows, so the first elements of ``data`` go
+//|     The blit takes place by rows, so the first elements of ``data`` go
-//| to the first row, the next elements to the next row, and so on.
+//|     to the first row, the next elements to the next row, and so on.
 //|
 //|     :param displayio.Bitmap bitmap: A writable bitmap
 //|     :param ReadableBuffer data: Buffer containing the source pixel values
@@ -436,13 +436,15 @@ STATIC mp_obj_t bitmaptools_arrayblit(size_t n_args, const mp_obj_t *pos_args, m
 MP_DEFINE_CONST_FUN_OBJ_KW(bitmaptools_arrayblit_obj, 0, bitmaptools_arrayblit);
 
 
-//| def readinto(bitmap: displayio.Bitmap, file: typing.BinaryIO, bits_per_pixel: int, element_size: int = 1, reverse_pixels_in_element: bool = False, swap_bytes_in_element: bool = False) -> None:
+//| def readinto(bitmap: displayio.Bitmap, file: typing.BinaryIO, bits_per_pixel: int, element_size: int = 1, reverse_pixels_in_element: bool = False, swap_bytes_in_element: bool = False, reverse_rows: bool = False) -> None:
-//|     """Read from a binary file into a bitmap
+//|     """Reads from a binary file into a bitmap.
-//| The file must be positioned so that it consists of ``bitmap.height`` rows of pixel data, where each row is the smallest multiple of ``element_size`` bytes that can hold ``bitmap.width`` pixels.
 //|
-//| The bytes in an element can be optionally swapped, and the pixels in an element can be reversed.
+//|     The file must be positioned so that it consists of ``bitmap.height`` rows of pixel data, where each row is the smallest multiple of ``element_size`` bytes that can hold ``bitmap.width`` pixels.
 //|
-//| This function doesn't parse image headers, but is useful to speed up loading of uncompressed image formats such as PCF glyph data.
+//|     The bytes in an element can be optionally swapped, and the pixels in an element can be reversed.  Also, the
+//|     row loading direction can be reversed, which may be requires for loading certain bitmap files.
+//|
+//|     This function doesn't parse image headers, but is useful to speed up loading of uncompressed image formats such as PCF glyph data.
 //|
 //|     :param displayio.Bitmap bitmap: A writable bitmap
 //|     :param typing.BinaryIO file: A file opened in binary mode
@@ -450,12 +452,13 @@ MP_DEFINE_CONST_FUN_OBJ_KW(bitmaptools_arrayblit_obj, 0, bitmaptools_arrayblit);
 //|     :param int element_size: Number of bytes per element.  Values of 1, 2, and 4 are supported, except that 24 ``bits_per_pixel`` requires 1 byte per element.
 //|     :param bool reverse_pixels_in_element: If set, the first pixel in a word is taken from the Most Signficant Bits; otherwise, it is taken from the Least Significant Bits.
 //|     :param bool swap_bytes_in_element: If the ``element_size`` is not 1, then reverse the byte order of each element read.
+//|     :param bool reverse_rows: Reverse the direction of the row loading (required for some bitmap images).
 //|     """
 //|     ...
 //|
 
 STATIC mp_obj_t bitmaptools_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
-    enum { ARG_bitmap, ARG_file, ARG_bits_per_pixel, ARG_element_size, ARG_reverse_pixels_in_element, ARG_swap_bytes_in_element };
+    enum { ARG_bitmap, ARG_file, ARG_bits_per_pixel, ARG_element_size, ARG_reverse_pixels_in_element, ARG_swap_bytes_in_element, ARG_reverse_rows };
     static const mp_arg_t allowed_args[] = {
         { MP_QSTR_bitmap, MP_ARG_REQUIRED | MP_ARG_OBJ },
         { MP_QSTR_file, MP_ARG_REQUIRED | MP_ARG_OBJ },
@@ -463,6 +466,7 @@ STATIC mp_obj_t bitmaptools_readinto(size_t n_args, const mp_obj_t *pos_args, mp
         { MP_QSTR_element_size, MP_ARG_INT, { .u_int = 1 } },
         { MP_QSTR_reverse_pixels_in_element, MP_ARG_BOOL, { .u_bool = false } },
         { MP_QSTR_swap_bytes_in_element,  MP_ARG_BOOL, { .u_bool = false } },
+        { MP_QSTR_reverse_rows,  MP_ARG_BOOL, { .u_bool = false } },
     };
 
     mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
@@ -503,8 +507,9 @@ STATIC mp_obj_t bitmaptools_readinto(size_t n_args, const mp_obj_t *pos_args, mp
 
     bool reverse_pixels_in_element = args[ARG_reverse_pixels_in_element].u_bool;
     bool swap_bytes_in_element = args[ARG_swap_bytes_in_element].u_bool;
+    bool reverse_rows = args[ARG_reverse_rows].u_bool;
 
-    common_hal_bitmaptools_readinto(bitmap, file, element_size, bits_per_pixel, reverse_pixels_in_element, swap_bytes_in_element);
+    common_hal_bitmaptools_readinto(bitmap, file, element_size, bits_per_pixel, reverse_pixels_in_element, swap_bytes_in_element, reverse_rows);
 
     return mp_const_none;
 }

shared-bindings/bitmaptools/__init__.h

@@ -51,7 +51,7 @@ void common_hal_bitmaptools_draw_line(displayio_bitmap_t *destination,
     int16_t x1, int16_t y1,
     uint32_t value);
 
-void common_hal_bitmaptools_readinto(displayio_bitmap_t *self, pyb_file_obj_t *file, int element_size, int bits_per_pixel, bool reverse_pixels_in_word, bool swap_bytes);
+void common_hal_bitmaptools_readinto(displayio_bitmap_t *self, pyb_file_obj_t *file, int element_size, int bits_per_pixel, bool reverse_pixels_in_word, bool swap_bytes, bool reverse_rows);
 void common_hal_bitmaptools_arrayblit(displayio_bitmap_t *self, void *data, int element_size, int x1, int y1, int x2, int y2, bool skip_specified, uint32_t skip_index);
 
 #endif // MICROPY_INCLUDED_SHARED_BINDINGS_BITMAPTOOLS__INIT__H

shared-bindings/displayio/Bitmap.c

@@ -37,7 +37,15 @@
 #include "supervisor/shared/translate.h"
 
 //| class Bitmap:
-//|     """Stores values of a certain size in a 2D array"""
+//|     """Stores values of a certain size in a 2D array
+//|
+//| Bitmaps can be treated as read-only buffers. If the number of bits in a pixel is 8, 16, or 32; and the number of bytes
+//| per row is a multiple of 4, then the resulting memoryview will correspond directly with the bitmap's contents. Otherwise,
+//| the bitmap data is packed into the memoryview with unspecified padding.
+//|
+//| A read-only buffer can be used e.g., with `ulab.frombuffer` to efficiently create an array with the same content as a Bitmap;
+//| to move data efficiently from ulab back into a Bitmap, use `bitmaptools.arrayblit`.
+//| """
 //|
 //|     def __init__(self, width: int, height: int, value_count: int) -> None:
 //|         """Create a Bitmap object with the given fixed size. Each pixel stores a value that is used to
@@ -300,10 +308,17 @@ STATIC const mp_rom_map_elem_t displayio_bitmap_locals_dict_table[] = {
 };
 STATIC MP_DEFINE_CONST_DICT(displayio_bitmap_locals_dict, displayio_bitmap_locals_dict_table);
 
+// (the get_buffer protocol returns 0 for success, 1 for failure)
+STATIC mp_int_t bitmap_get_buffer(mp_obj_t self_in, mp_buffer_info_t *bufinfo, mp_uint_t flags) {
+    displayio_bitmap_t *self = MP_OBJ_TO_PTR(self_in);
+    return common_hal_displayio_bitmap_get_buffer(self, bufinfo, flags);
+}
+
 const mp_obj_type_t displayio_bitmap_type = {
     { &mp_type_type },
     .name = MP_QSTR_Bitmap,
     .make_new = displayio_bitmap_make_new,
     .subscr = bitmap_subscr,
     .locals_dict = (mp_obj_dict_t *)&displayio_bitmap_locals_dict,
+    .buffer_p = { .get_buffer = bitmap_get_buffer },
 };

shared-bindings/displayio/Bitmap.h

@@ -45,5 +45,6 @@ void common_hal_displayio_bitmap_blit(displayio_bitmap_t *self, int16_t x, int16
     uint32_t skip_index, bool skip_index_none);
 uint32_t common_hal_displayio_bitmap_get_pixel(displayio_bitmap_t *bitmap, int16_t x, int16_t y);
 void common_hal_displayio_bitmap_fill(displayio_bitmap_t *bitmap, uint32_t value);
+int common_hal_displayio_bitmap_get_buffer(displayio_bitmap_t *self, mp_buffer_info_t *bufinfo, mp_uint_t flags);
 
 #endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_BITMAP_H

shared-bindings/pwmio/PWMOut.c

@@ -102,14 +102,34 @@ STATIC mp_obj_t pwmio_pwmout_make_new(const mp_obj_type_t *type, size_t n_args,
     pwmio_pwmout_obj_t *self = m_new_obj(pwmio_pwmout_obj_t);
     self->base.type = &pwmio_pwmout_type;
     pwmout_result_t result = common_hal_pwmio_pwmout_construct(self, pin, duty_cycle, frequency, variable_frequency);
-    if (result == PWMOUT_INVALID_PIN) {
+    switch (result) {
-        mp_raise_ValueError(translate("Invalid pin"));
+        case PWMOUT_OK:
-    } else if (result == PWMOUT_INVALID_FREQUENCY) {
+            break;
-        mp_raise_ValueError(translate("Invalid PWM frequency"));
+        case PWMOUT_INVALID_PIN:
-    } else if (result == PWMOUT_ALL_TIMERS_ON_PIN_IN_USE) {
+            mp_raise_ValueError(translate("Invalid pin"));
-        mp_raise_ValueError(translate("All timers for this pin are in use"));
+            break;
-    } else if (result == PWMOUT_ALL_TIMERS_IN_USE) {
+        case PWMOUT_INVALID_FREQUENCY:
-        mp_raise_RuntimeError(translate("All timers in use"));
+            mp_raise_ValueError(translate("Invalid PWM frequency"));
+            break;
+        case PWMOUT_INVALID_FREQUENCY_ON_PIN:
+            mp_raise_ValueError(translate("Frequency must match existing PWMOut using this timer"));
+            break;
+        case PWMOUT_VARIABLE_FREQUENCY_NOT_AVAILABLE:
+            mp_raise_ValueError(translate("Cannot vary frequency on a timer that is already in use"));
+            break;
+        case PWMOUT_ALL_TIMERS_ON_PIN_IN_USE:
+            mp_raise_ValueError(translate("All timers for this pin are in use"));
+            break;
+        case PWMOUT_ALL_TIMERS_IN_USE:
+            mp_raise_RuntimeError(translate("All timers in use"));
+            break;
+        case PWMOUT_ALL_CHANNELS_IN_USE:
+            mp_raise_RuntimeError(translate("All channels in use"));
+            break;
+        default:
+        case PWMOUT_INITIALIZATION_ERROR:
+            mp_raise_RuntimeError(translate("Could not start PWM"));
+            break;
     }
 
     return MP_OBJ_FROM_PTR(self);

shared-bindings/pwmio/PWMOut.h

@@ -36,8 +36,12 @@ typedef enum pwmout_result_t {
     PWMOUT_OK,
     PWMOUT_INVALID_PIN,
     PWMOUT_INVALID_FREQUENCY,
+    PWMOUT_INVALID_FREQUENCY_ON_PIN,
+    PWMOUT_VARIABLE_FREQUENCY_NOT_AVAILABLE,
     PWMOUT_ALL_TIMERS_ON_PIN_IN_USE,
-    PWMOUT_ALL_TIMERS_IN_USE
+    PWMOUT_ALL_TIMERS_IN_USE,
+    PWMOUT_ALL_CHANNELS_IN_USE,
+    PWMOUT_INITIALIZATION_ERROR,
 } pwmout_result_t;
 
 extern pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t *self,

shared-module/bitmaptools/__init__.c

@@ -95,10 +95,6 @@ void common_hal_bitmaptools_rotozoom(displayio_bitmap_t *self, int16_t ox, int16
     // #    */
 
 
-    if (self->read_only) {
-        mp_raise_RuntimeError(translate("Read-only object"));
-    }
-
     int16_t x,y;
 
     int16_t minx = dest_clip1_x;
@@ -199,6 +195,9 @@ void common_hal_bitmaptools_rotozoom(displayio_bitmap_t *self, int16_t ox, int16
     float rowu = startu + miny * duCol;
     float rowv = startv + miny * dvCol;
 
+    displayio_area_t dirty_area = {minx, miny, maxx + 1, maxy + 1};
+    displayio_bitmap_set_dirty_area(self, &dirty_area);
+
     for (y = miny; y <= maxy; y++) {
         float u = rowu + minx * duRow;
         float v = rowv + minx * dvRow;
@@ -206,7 +205,7 @@ void common_hal_bitmaptools_rotozoom(displayio_bitmap_t *self, int16_t ox, int16
             if (u >= source_clip0_x && u < source_clip1_x && v >= source_clip0_y && v < source_clip1_y) {
                 uint32_t c = common_hal_displayio_bitmap_get_pixel(source, u, v);
                 if ((skip_index_none) || (c != skip_index)) {
-                    common_hal_displayio_bitmap_set_pixel(self, x, y, c);
+                    displayio_bitmap_write_pixel(self, x, y, c);
                 }
             }
             u += duRow;
@@ -236,34 +235,18 @@ void common_hal_bitmaptools_fill_region(displayio_bitmap_t *destination,
     //
     // input checks should ensure that x1 < x2 and y1 < y2 and are within the bitmap region
 
-    if (destination->read_only) {
+    displayio_area_t area = { x1, y1, x2, y2 };
-        mp_raise_RuntimeError(translate("Read-only object"));
+    displayio_area_canon(&area);
-    }
 
-    // Ensure x1 < x2 and y1 < y2
+    displayio_area_t bitmap_area = { 0, 0, destination->width, destination->height };
-    if (x1 > x2) {
+    displayio_area_compute_overlap(&area, &bitmap_area, &area);
-        int16_t temp = x2;
-        x2 = x1;
-        x1 = temp;
-    }
-    if (y1 > y2) {
-        int16_t temp = y2;
-        y2 = y1;
-        y1 = temp;
-    }
-
-    // constrain to bitmap dimensions
-    x1 = constrain(x1, 0, destination->width);
-    x2 = constrain(x2, 0, destination->width);
-    y1 = constrain(y1, 0, destination->height);
-    y2 = constrain(y2, 0, destination->height);
 
     // update the dirty rectangle
-    displayio_bitmap_set_dirty_area(destination, x1, y1, x2, y2);
+    displayio_bitmap_set_dirty_area(destination, &area);
 
     int16_t x, y;
-    for (x = x1; x < x2; x++) {
+    for (x = area.x1; x < area.x2; x++) {
-        for (y = y1; y < y2; y++) {
+        for (y = area.y1; y < area.y2; y++) {
             displayio_bitmap_write_pixel(destination, x, y, value);
         }
     }
@@ -274,10 +257,6 @@ void common_hal_bitmaptools_draw_line(displayio_bitmap_t *destination,
     int16_t x1, int16_t y1,
     uint32_t value) {
 
-    if (destination->read_only) {
-        mp_raise_RuntimeError(translate("Read-only object"));
-    }
-
     //
     // adapted from Adafruit_CircuitPython_Display_Shapes.Polygon._line
     //
@@ -298,13 +277,11 @@ void common_hal_bitmaptools_draw_line(displayio_bitmap_t *destination,
         ybb0 = y1;
         ybb1 = y0 + 1;
     }
+    displayio_area_t area = { xbb0, ybb0, xbb1, ybb1 };
+    displayio_area_t bitmap_area = { 0, 0, destination->width, destination->height };
+    displayio_area_compute_overlap(&area, &bitmap_area, &area);
 
-    xbb0 = constrain(xbb0, 0, destination->width);
+    displayio_bitmap_set_dirty_area(destination, &area);
-    xbb1 = constrain(xbb1, 0, destination->width);
-    ybb0 = constrain(ybb0, 0, destination->height);
-    ybb1 = constrain(ybb1, 0, destination->height);
-
-    displayio_bitmap_set_dirty_area(destination, xbb0, ybb0, xbb1, ybb1);
 
     int16_t temp, x, y;
 
@@ -401,24 +378,26 @@ void common_hal_bitmaptools_arrayblit(displayio_bitmap_t *self, void *data, int
             }
         }
     }
-    displayio_bitmap_set_dirty_area(self, x1, y1, x2, y2);
+    displayio_area_t area = { x1, y1, x2, y2 };
+    displayio_bitmap_set_dirty_area(self, &area);
 }
 
-void common_hal_bitmaptools_readinto(displayio_bitmap_t *self, pyb_file_obj_t *file, int element_size, int bits_per_pixel, bool reverse_pixels_in_element, bool swap_bytes) {
+void common_hal_bitmaptools_readinto(displayio_bitmap_t *self, pyb_file_obj_t *file, int element_size, int bits_per_pixel, bool reverse_pixels_in_element, bool swap_bytes, bool reverse_rows) {
     uint32_t mask = (1 << common_hal_displayio_bitmap_get_bits_per_value(self)) - 1;
 
-    if (self->read_only) {
+    displayio_area_t a = {0, 0, self->width, self->height};
-        mp_raise_RuntimeError(translate("Read-only object"));
+    displayio_bitmap_set_dirty_area(self, &a);
-    }
 
     size_t elements_per_row = (self->width * bits_per_pixel + element_size * 8 - 1) / (element_size * 8);
     size_t rowsize = element_size * elements_per_row;
     size_t rowsize_in_u32 = (rowsize + sizeof(uint32_t) - 1) / sizeof(uint32_t);
     size_t rowsize_in_u16 = (rowsize + sizeof(uint16_t) - 1) / sizeof(uint16_t);
+
     for (int y = 0; y < self->height; y++) {
         uint32_t rowdata32[rowsize_in_u32];
         uint16_t *rowdata16 = (uint16_t *)rowdata32;
         uint8_t *rowdata8 = (uint8_t *)rowdata32;
+        const int y_draw = reverse_rows ? (self->height) - 1 - y : y;
 
         UINT bytes_read = 0;
         if (f_read(&file->fp, rowdata32, rowsize, &bytes_read) != FR_OK || bytes_read != rowsize) {
@@ -462,7 +441,7 @@ void common_hal_bitmaptools_readinto(displayio_bitmap_t *self, pyb_file_obj_t *f
                     int byte_offset = x / 2;
                     int bit_offset = 4 * (reverse_pixels_in_element ? (1 - x % 2) : x % 2);
 
-                    value = (rowdata8[byte_offset] >> bit_offset) & 7;
+                    value = (rowdata8[byte_offset] >> bit_offset) & 0xf;
                     break;
                 }
                 case 8:
@@ -481,10 +460,7 @@ void common_hal_bitmaptools_readinto(displayio_bitmap_t *self, pyb_file_obj_t *f
                     value = rowdata32[x];
                     break;
             }
-
+            displayio_bitmap_write_pixel(self, x, y_draw, value & mask);
-            displayio_bitmap_write_pixel(self, x, y, value & mask);
         }
     }
-
-    displayio_bitmap_set_dirty_area(self, 0, 0, self->width, self->height);
 }

shared-module/displayio/Bitmap.c

@@ -105,41 +105,16 @@ uint32_t common_hal_displayio_bitmap_get_pixel(displayio_bitmap_t *self, int16_t
     return 0;
 }
 
-void displayio_bitmap_set_dirty_area(displayio_bitmap_t *self, int16_t x1, int16_t y1, int16_t x2, int16_t y2) {
+void displayio_bitmap_set_dirty_area(displayio_bitmap_t *self, const displayio_area_t *dirty_area) {
-    // Update the bitmap's dirty region with the rectangle bounded by (x1,y1) and (x2, y2)
+    if (self->read_only) {
-
+        mp_raise_RuntimeError(translate("Read-only object"));
-    // Arrange x1 < x2, y1 < y2
-    if (x1 > x2) {
-        int16_t temp = x1;
-        x1 = x2;
-        x2 = temp;
-    }
-    if (y1 > y2) {
-        int16_t temp = y1;
-        y1 = y2;
-        y2 = temp;
     }
 
-    // Update the dirty area.
+    displayio_area_t area = *dirty_area;
-    if (self->dirty_area.x1 == self->dirty_area.x2) {
+    displayio_area_canon(&area);
-        self->dirty_area.x1 = x1;
+    displayio_area_union(&area, &self->dirty_area, &area);
-        self->dirty_area.x2 = x2;
+    displayio_area_t bitmap_area = {0, 0, self->width, self->height};
-        self->dirty_area.y1 = y1;
+    displayio_area_compute_overlap(&area, &bitmap_area, &self->dirty_area);
-        self->dirty_area.y2 = y2;
-    } else {
-        if (x1 < self->dirty_area.x1) {
-            self->dirty_area.x1 = x1;
-        }
-        if (x2 > self->dirty_area.x2) {
-            self->dirty_area.x2 = x2;
-        }
-        if (y1 < self->dirty_area.y1) {
-            self->dirty_area.y1 = y1;
-        }
-        if (y2 > self->dirty_area.y2) {
-            self->dirty_area.y2 = y2;
-        }
-    }
 }
 
 void displayio_bitmap_write_pixel(displayio_bitmap_t *self, int16_t x, int16_t y, uint32_t value) {
@@ -175,10 +150,6 @@ void common_hal_displayio_bitmap_blit(displayio_bitmap_t *self, int16_t x, int16
     // If skip_value is `None`, then all pixels are copied.
     // This function assumes input checks were performed for pixel index entries.
 
-    if (self->read_only) {
-        mp_raise_RuntimeError(translate("Read-only object"));
-    }
-
     // Update the dirty area
     int16_t dirty_x_max = (x + (x2 - x1));
     if (dirty_x_max > self->width) {
@@ -189,7 +160,8 @@ void common_hal_displayio_bitmap_blit(displayio_bitmap_t *self, int16_t x, int16
         dirty_y_max = self->height;
     }
 
-    displayio_bitmap_set_dirty_area(self, x, y, dirty_x_max, dirty_y_max);
+    displayio_area_t a = { x, y, dirty_x_max, dirty_y_max};
+    displayio_bitmap_set_dirty_area(self, &a);
 
     bool x_reverse = false;
     bool y_reverse = false;
@@ -226,12 +198,9 @@ void common_hal_displayio_bitmap_blit(displayio_bitmap_t *self, int16_t x, int16
 }
 
 void common_hal_displayio_bitmap_set_pixel(displayio_bitmap_t *self, int16_t x, int16_t y, uint32_t value) {
-    if (self->read_only) {
-        mp_raise_RuntimeError(translate("Read-only object"));
-    }
-
     // update the dirty region
-    displayio_bitmap_set_dirty_area(self, x, y, x + 1, y + 1);
+    displayio_area_t a = {x, y, x + 1, y + 1};
+    displayio_bitmap_set_dirty_area(self, &a);
 
     // write the pixel
     displayio_bitmap_write_pixel(self, x, y, value);
@@ -252,14 +221,8 @@ void displayio_bitmap_finish_refresh(displayio_bitmap_t *self) {
 }
 
 void common_hal_displayio_bitmap_fill(displayio_bitmap_t *self, uint32_t value) {
-    if (self->read_only) {
+    displayio_area_t a = {0, 0, self->width, self->height};
-        mp_raise_RuntimeError(translate("Read-only object"));
+    displayio_bitmap_set_dirty_area(self, &a);
-    }
-    // Update the dirty area.
-    self->dirty_area.x1 = 0;
-    self->dirty_area.x2 = self->width;
-    self->dirty_area.y1 = 0;
-    self->dirty_area.y2 = self->height;
 
     // build the packed word
     uint32_t word = 0;
@@ -271,3 +234,23 @@ void common_hal_displayio_bitmap_fill(displayio_bitmap_t *self, uint32_t value)
         self->data[i] = word;
     }
 }
+
+int common_hal_displayio_bitmap_get_buffer(displayio_bitmap_t *self, mp_buffer_info_t *bufinfo, mp_uint_t flags) {
+    if (flags & MP_BUFFER_WRITE) {
+        return 1;
+    }
+    bufinfo->len = self->stride * self->height * sizeof(size_t);
+    bufinfo->buf = self->data;
+    switch (self->bits_per_value) {
+        case 32:
+            bufinfo->typecode = 'I';
+            break;
+        case 16:
+            bufinfo->typecode = 'H';
+            break;
+        default:
+            bufinfo->typecode = 'B';
+            break;
+    }
+    return 0;
+}

shared-module/displayio/Bitmap.h

@@ -49,7 +49,7 @@ typedef struct {
 
 void displayio_bitmap_finish_refresh(displayio_bitmap_t *self);
 displayio_area_t *displayio_bitmap_get_refresh_areas(displayio_bitmap_t *self, displayio_area_t *tail);
-void displayio_bitmap_set_dirty_area(displayio_bitmap_t *self, int16_t x1, int16_t y1, int16_t x2, int16_t y2);
+void displayio_bitmap_set_dirty_area(displayio_bitmap_t *self, const displayio_area_t *area);
 void displayio_bitmap_write_pixel(displayio_bitmap_t *self, int16_t x, int16_t y, uint32_t value);
 
 #endif // MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_BITMAP_H

shared-module/displayio/Display.c

@@ -111,7 +111,7 @@ void common_hal_displayio_display_construct(displayio_display_obj_t *self,
     self->backlight_inout.base.type = &mp_type_NoneType;
     if (backlight_pin != NULL && common_hal_mcu_pin_is_free(backlight_pin)) {
         // Avoid PWM types and functions when the module isn't enabled
-        #if (CIRCUITPY_PULSEIO)
+        #if (CIRCUITPY_PWMIO)
         pwmout_result_t result = common_hal_pwmio_pwmout_construct(&self->backlight_pwm, backlight_pin, 0, 50000, false);
         if (result != PWMOUT_OK) {
             self->backlight_inout.base.type = &digitalio_digitalinout_type;
@@ -173,14 +173,14 @@ bool common_hal_displayio_display_set_brightness(displayio_display_obj_t *self,
     bool ok = false;
 
     // Avoid PWM types and functions when the module isn't enabled
-    #if (CIRCUITPY_PULSEIO)
+    #if (CIRCUITPY_PWMIO)
     bool ispwm = (self->backlight_pwm.base.type == &pwmio_pwmout_type) ? true : false;
     #else
     bool ispwm = false;
     #endif
 
     if (ispwm) {
-        #if (CIRCUITPY_PULSEIO)
+        #if (CIRCUITPY_PWMIO)
         common_hal_pwmio_pwmout_set_duty_cycle(&self->backlight_pwm, (uint16_t)(0xffff * brightness));
         ok = true;
         #else
@@ -410,7 +410,7 @@ STATIC void _update_backlight(displayio_display_obj_t *self) {
     if (supervisor_ticks_ms64() - self->last_backlight_refresh < 100) {
         return;
     }
-    // TODO(tannewt): Fade the backlight based on it's existing value and a target value. The target
+    // TODO(tannewt): Fade the backlight based on its existing value and a target value. The target
     // should account for ambient light when possible.
     common_hal_displayio_display_set_brightness(self, 1.0);
 
@@ -428,7 +428,7 @@ void displayio_display_background(displayio_display_obj_t *self) {
 void release_display(displayio_display_obj_t *self) {
     common_hal_displayio_display_set_auto_refresh(self, false);
     release_display_core(&self->core);
-    #if (CIRCUITPY_PULSEIO)
+    #if (CIRCUITPY_PWMIO)
     if (self->backlight_pwm.base.type == &pwmio_pwmout_type) {
         common_hal_pwmio_pwmout_reset_ok(&self->backlight_pwm);
         common_hal_pwmio_pwmout_deinit(&self->backlight_pwm);

shared-module/displayio/__init__.c

@@ -309,26 +309,46 @@ bool displayio_area_compute_overlap(const displayio_area_t *a,
     return true;
 }
 
+void displayio_copy_coords(const displayio_area_t *src, displayio_area_t *dest) {
+    dest->x1 = src->x1;
+    dest->y1 = src->y1;
+    dest->x2 = src->x2;
+    dest->y2 = src->y2;
+}
+
+bool displayio_area_empty(const displayio_area_t *a) {
+    return (a->x1 == a->x2) || (a->y1 == a->y2);
+}
+
+void displayio_area_canon(displayio_area_t *a) {
+    if (a->x1 > a->x2) {
+        int16_t t = a->x1;
+        a->x1 = a->x2;
+        a->x2 = t;
+    }
+    if (a->y1 > a->y2) {
+        int16_t t = a->y1;
+        a->y1 = a->y2;
+        a->y2 = t;
+    }
+}
+
 void displayio_area_union(const displayio_area_t *a,
     const displayio_area_t *b,
     displayio_area_t *u) {
-    u->x1 = a->x1;
-    if (b->x1 < u->x1) {
-        u->x1 = b->x1;
-    }
-    u->x2 = a->x2;
-    if (b->x2 > u->x2) {
-        u->x2 = b->x2;
-    }
 
-    u->y1 = a->y1;
+    if (displayio_area_empty(a)) {
-    if (b->y1 < u->y1) {
+        displayio_copy_coords(b, u);
-        u->y1 = b->y1;
+        return;
     }
-    u->y2 = a->y2;
+    if (displayio_area_empty(b)) {
-    if (b->y2 > u->y2) {
+        displayio_copy_coords(a, u);
-        u->y2 = b->y2;
+        return;
     }
+    u->x1 = MIN(a->x1, b->x1);
+    u->y1 = MIN(a->y1, b->y1);
+    u->x2 = MAX(a->x2, b->x2);
+    u->y2 = MAX(a->y2, b->y2);
 }
 
 uint16_t displayio_area_width(const displayio_area_t *area) {

shared-module/displayio/area.h

@@ -53,6 +53,9 @@ typedef struct {
 
 extern displayio_buffer_transform_t null_transform;
 
+bool displayio_area_empty(const displayio_area_t *a);
+void displayio_area_copy_coords(const displayio_area_t *src, displayio_area_t *dest);
+void displayio_area_canon(displayio_area_t *a);
 void displayio_area_union(const displayio_area_t *a,
     const displayio_area_t *b,
     displayio_area_t *u);

supervisor/shared/external_flash/devices.h

@@ -568,17 +568,17 @@ typedef struct {
         .single_status_byte = true, \
 }
 
-// Settings for the Macronix MX25R1635F 8MiB SPI flash.
+// Settings for the Macronix MX25R1635F 2MiB SPI flash.
 // Datasheet: https://www.macronix.com/Lists/Datasheet/Attachments/7595/MX25R1635F,%20Wide%20Range,%2016Mb,%20v1.6.pdf
-// In low power mode, quad operations can only run at 8 MHz.
+// In low power mode, quad operations can only run at 8 MHz. In high power mode it can do 80 MHz.
 #define MX25R1635F  { \
         .total_size = (1 << 21), /* 2 MiB */ \
         .start_up_time_us = 800, \
         .manufacturer_id = 0xc2, \
         .memory_type = 0x28, \
         .capacity = 0x15, \
-        .max_clock_speed_mhz = 33, /* 8 mhz for dual/quad */ \
+        .max_clock_speed_mhz = 8, /* 33 MHz for 1-bit operations */ \
-        .quad_enable_bit_mask = 0x80, \
+        .quad_enable_bit_mask = 0x40, \
         .has_sector_protection = false, \
         .supports_fast_read = true, \
         .supports_qspi = true, \