djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #719 from tannewt/fix_i2c_hang

Browse Source 
Fix I2C init hang when the SCL pin is pulled low.
This commit is contained in:
Kattni 2018-03-26 20:08:14 -04:00 committed by GitHub
commit 77938db8c8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 30 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
ports/atmel-samd/common-hal/busio/I2C.c
View File

@ -34,6 +34,7 @@
#include "peripherals.h" #include "peripherals.h"
#include "pins.h" #include "pins.h"
#include "shared-bindings/microcontroller/__init__.h"
// Number of times to try to send packet if failed. // Number of times to try to send packet if failed.
@ -72,24 +73,46 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
mp_raise_ValueError("Invalid pins"); mp_raise_ValueError("Invalid pins");
} }
// Test that the pins are in a high state. (Hopefully indicating they are pulled up.)
gpio_set_pin_function(sda->pin, GPIO_PIN_FUNCTION_OFF);
gpio_set_pin_function(scl->pin, GPIO_PIN_FUNCTION_OFF);
gpio_set_pin_direction(sda->pin, GPIO_DIRECTION_IN);
gpio_set_pin_direction(scl->pin, GPIO_DIRECTION_IN);
gpio_set_pin_pull_mode(sda->pin, GPIO_PULL_DOWN);
gpio_set_pin_pull_mode(scl->pin, GPIO_PULL_DOWN);
common_hal_mcu_delay_us(10);
gpio_set_pin_pull_mode(sda->pin, GPIO_PULL_OFF);
gpio_set_pin_pull_mode(scl->pin, GPIO_PULL_OFF);
// We must pull up within 3us to achieve 400khz.
common_hal_mcu_delay_us(3);
if (!gpio_get_pin_level(sda->pin) || !gpio_get_pin_level(scl->pin)) {
reset_pin(sda->pin);
reset_pin(scl->pin);
mp_raise_RuntimeError("SDA or SCL needs a pull up");
}
gpio_set_pin_function(sda->pin, sda_pinmux);
gpio_set_pin_function(scl->pin, scl_pinmux);
// Set up I2C clocks on sercom. // Set up I2C clocks on sercom.
samd_peripherals_sercom_clock_init(sercom, sercom_index); samd_peripherals_sercom_clock_init(sercom, sercom_index);
if (i2c_m_sync_init(&self->i2c_desc, sercom) != ERR_NONE) { if (i2c_m_sync_init(&self->i2c_desc, sercom) != ERR_NONE) {
reset_pin(sda->pin);
reset_pin(scl->pin);
mp_raise_OSError(MP_EIO); mp_raise_OSError(MP_EIO);
} }
gpio_set_pin_pull_mode(sda->pin, GPIO_PULL_OFF);
gpio_set_pin_function(sda->pin, sda_pinmux);
gpio_set_pin_pull_mode(scl->pin, GPIO_PULL_OFF);
gpio_set_pin_function(scl->pin, scl_pinmux);
// clkrate is always 0. baud_rate is in kHz. // clkrate is always 0. baud_rate is in kHz.
// Frequency must be set before the I2C device is enabled. // Frequency must be set before the I2C device is enabled.
if (i2c_m_sync_set_baudrate(&self->i2c_desc, 0, frequency / 1000) != ERR_NONE) { if (i2c_m_sync_set_baudrate(&self->i2c_desc, 0, frequency / 1000) != ERR_NONE) {
reset_pin(sda->pin);
reset_pin(scl->pin);
mp_raise_ValueError("Unsupported baudrate"); mp_raise_ValueError("Unsupported baudrate");
} }