From 6fa60153eae746bee4657ae3fcd69e71144c6d59 Mon Sep 17 00:00:00 2001 From: Torwag Date: Thu, 12 May 2016 11:13:10 +0200 Subject: [PATCH] esp8266/README: Add a very first start section. Adding a very first start section to get people going after flashing. I tried to condense it to a minimum to avoid as much as possible redundancy and bloating. --- esp8266/README.md | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/esp8266/README.md b/esp8266/README.md index e187d4da17..0509a3799b 100644 --- a/esp8266/README.md +++ b/esp8266/README.md @@ -69,6 +69,34 @@ $ make PORT=/dev/ttyUSB0 deploy The image produced is `firmware-combined.bin`, to be flashed at 0x00000. +First start +----------- + +__Serial prompt__ + +You can access the REPL (Python prompt) over UART (the same as used for +programming). +- Baudrate: 115200 + +__WiFi__ + +Initally, the device configures itself as a WiFi access point (AP). +- ESSID: MicroPython-xxxxxx (x’s are replaced with part of the MAC address). +- Password: micropythoN (note the upper-case N). +- IP address of the board: 192.168.4.1. +- DHCP-server is activated. + +__WebREPL__ + +Python prompt over WiFi, connecting through a browser. +- Hosted at http://micropython.org/webrepl. +- GitHub repository https://github.com/micropython/webrepl. + +Please follow the instructions there. + +More detailed instructions can be found at +http://docs.micropython.org/en/latest/esp8266/esp8266/tutorial/intro.html + Troubleshooting ---------------