Fix up Spresense build. It doesn't sleep.

ports/atmel-samd/mphalport.h

@@ -34,9 +34,8 @@
 #include "supervisor/shared/tick.h"
 
 // Global millisecond tick count (driven by SysTick interrupt).
-static inline mp_uint_t mp_hal_ticks_ms(void) {
+#define mp_hal_ticks_ms()       ((mp_uint_t) supervisor_ticks_ms32())
-  return supervisor_ticks_ms32();
+
-}
 // Number of bytes in receive buffer
 volatile uint8_t usb_rx_count;
 volatile bool mp_cdc_enabled;

ports/cxd56/Makefile

@@ -152,7 +152,6 @@ SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE))
 SRC_S = supervisor/cpu.s
 
 SRC_C = \
-	tick.c \
 	background.c \
 	fatfs_port.c \
 	mphalport.c \
@@ -184,7 +183,7 @@ OBJ += $(addprefix $(BUILD)/, $(SRC_MOD:.c=.o))
 # List of sources for qstr extraction
 SRC_QSTR += $(SRC_C) $(SRC_SUPERVISOR) $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED)
 # Sources that only hold QSTRs after pre-processing.
-SRC_QSTR_PREPROCESSOR += 
+SRC_QSTR_PREPROCESSOR +=
 
 all: $(BUILD)/firmware.spk
 
@@ -197,7 +196,7 @@ $(FIRMWARE):
 	$(ECHO) "run make flash-bootloader again to flash bootloader."
 	exit 1
 
-$(BUILD)/libmpy.a: $(SPRESENSE_SDK) $(OBJ) 
+$(BUILD)/libmpy.a: $(SPRESENSE_SDK) $(OBJ)
 	$(ECHO) "AR $@"
 	$(Q)$(AR) rcs $(BUILD)/libmpy.a $(OBJ)
 

ports/cxd56/common-hal/microcontroller/Processor.c

@@ -24,6 +24,8 @@
  * THE SOFTWARE.
  */
 
+#include <stdbool.h> // for cxd56_clock.h
+#include <cxd56_clock.h>
 #include <sys/boardctl.h>
 
 // For NAN: remove when not needed.
@@ -31,7 +33,7 @@
 #include "py/mphal.h"
 
 uint32_t common_hal_mcu_processor_get_frequency(void) {
-    return mp_hal_ticks_cpu();
+    return cxd56_get_cpu_baseclk();
 }
 
 float common_hal_mcu_processor_get_temperature(void) {

ports/cxd56/common-hal/microcontroller/__init__.c

@@ -24,6 +24,8 @@
  * THE SOFTWARE.
  */
 
+#include <stdbool.h> // for cxd56_clock.h
+#include <cxd56_clock.h>
 #include <sys/boardctl.h>
 
 #include "py/mphal.h"
@@ -42,8 +44,20 @@ const mcu_processor_obj_t common_hal_mcu_processor_obj = {
     },
 };
 
+#define DELAY_CORRECTION    (700)
+
 void common_hal_mcu_delay_us(uint32_t delay) {
-    mp_hal_delay_us(delay);
+    if (delay) {
+        unsigned long long ticks = cxd56_get_cpu_baseclk() / 1000000L * delay;
+        if (ticks < DELAY_CORRECTION) return; // delay time already used in calculation
+
+        ticks -= DELAY_CORRECTION;
+        ticks /= 6;
+        // following loop takes 6 cycles
+        do {
+            __asm__ __volatile__("nop");
+        } while(--ticks);
+    }
 }
 
 void common_hal_mcu_disable_interrupts(void) {

ports/cxd56/common-hal/pulseio/PulseIn.c

@@ -25,6 +25,7 @@
  */
 
 #include <arch/board/board.h>
+#include <sys/time.h>
 
 #include "py/runtime.h"
 #include "py/mphal.h"
@@ -51,7 +52,9 @@ static int pulsein_set_config(pulseio_pulsein_obj_t *self, bool first_edge) {
 
 static int pulsein_interrupt_handler(int irq, FAR void *context, FAR void *arg) {
     // Grab the current time first.
-    uint32_t current_us = mp_hal_ticks_us();
+    struct timeval tv;
+    gettimeofday(&tv, NULL);
+    uint32_t current_us = tv.tv_sec * 1000000 + tv.tv_usec;
 
     pulseio_pulsein_obj_t *self = pulsein_objects[irq - CXD56_IRQ_EXDEVICE_0];
 

ports/cxd56/common-hal/time/__init__.c

@@ -1,45 +0,0 @@
-/*
- * This file is part of the MicroPython project, http://micropython.org/
- *
- * The MIT License (MIT)
- *
- * Copyright 2019 Sony Semiconductor Solutions Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <sys/time.h>
-
-#include "py/mphal.h"
-
-#include "supervisor/shared/tick.h"
-
-uint64_t common_hal_time_monotonic(void) {
-    return supervisor_ticks_ms64();
-}
-
-uint64_t common_hal_time_monotonic_ns(void) {
-    struct timeval tv;
-    gettimeofday(&tv, NULL);
-    return 1000 * ((uint64_t) tv.tv_sec * 1000000 + (uint64_t) tv.tv_usec);
-}
-
-void common_hal_time_delay_ms(uint32_t delay) {
-    mp_hal_delay_ms(delay);
-}

ports/cxd56/mphalport.c

@@ -23,66 +23,3 @@
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
  */
-
-#include <stdbool.h>
-#include <sys/time.h>
-#include <cxd56_clock.h>
-#include <sys/boardctl.h>
-
-#include "py/mpstate.h"
-
-#include "supervisor/shared/tick.h"
-
-#define DELAY_CORRECTION    (700)
-#define DELAY_INTERVAL      (50)
-
-void mp_hal_init(void) {
-    boardctl(BOARDIOC_INIT, 0);
-}
-
-mp_uint_t mp_hal_ticks_ms(void) {
-    struct timeval tv;
-    gettimeofday(&tv, NULL);
-    return tv.tv_sec * 1000 + tv.tv_usec / 1000;
-}
-
-mp_uint_t mp_hal_ticks_us(void) {
-    struct timeval tv;
-    gettimeofday(&tv, NULL);
-    return tv.tv_sec * 1000000 + tv.tv_usec;
-}
-
-mp_uint_t mp_hal_ticks_cpu(void) {
-    return cxd56_get_cpu_baseclk();
-}
-
-void mp_hal_delay_ms(mp_uint_t delay) {
-    uint64_t start_tick = supervisor_ticks_ms64();
-    uint64_t duration = 0;
-    while (duration < delay) {
-        #ifdef MICROPY_VM_HOOK_LOOP
-            MICROPY_VM_HOOK_LOOP
-        #endif
-        // Check to see if we've been CTRL-Ced by autoreload or the user.
-        if(MP_STATE_VM(mp_pending_exception) == MP_OBJ_FROM_PTR(&MP_STATE_VM(mp_kbd_exception)) ||
-           MP_STATE_VM(mp_pending_exception) == MP_OBJ_FROM_PTR(&MP_STATE_VM(mp_reload_exception))) {
-            break;
-        }
-        duration = (supervisor_ticks_ms64() - start_tick);
-        // TODO(tannewt): Go to sleep for a little while while we wait.
-    }
-}
-
-void mp_hal_delay_us(uint32_t us) {
-    if (us) {
-        unsigned long long ticks = mp_hal_ticks_cpu() / 1000000L * us;
-        if (ticks < DELAY_CORRECTION) return; // delay time already used in calculation
-
-        ticks -= DELAY_CORRECTION;
-        ticks /= 6;
-        // following loop takes 6 cycles
-        do {
-            __asm__ __volatile__("nop");
-        } while(--ticks);
-    }
-}

ports/cxd56/mphalport.h

@@ -30,5 +30,8 @@
 #include <sys/types.h>
 
 #include "lib/utils/interrupt_char.h"
+#include "supervisor/shared/tick.h"
+
+#define mp_hal_ticks_ms()       ((mp_uint_t) supervisor_ticks_ms32())
 
 #endif // MICROPY_INCLUDED_CXD56_MPHALPORT_H

ports/cxd56/supervisor/internal_flash.c

@@ -59,7 +59,7 @@ uint32_t supervisor_flash_get_block_count(void) {
     return CXD56_SPIFLASHSIZE >> PAGE_SHIFT;
 }
 
-void supervisor_flash_flush(void) {
+void port_internal_flash_flush(void) {
     if (flash_sector == NO_SECTOR) {
         return;
     }

ports/cxd56/supervisor/port.c

@@ -25,13 +25,16 @@
  */
 
 #include <stdint.h>
+
 #include <sys/boardctl.h>
+#include <sys/time.h>
 
 #include "sched/sched.h"
 
 #include "boards/board.h"
 
 #include "supervisor/port.h"
+#include "supervisor/shared/tick.h"
 
 #include "common-hal/microcontroller/Pin.h"
 #include "common-hal/analogio/AnalogIn.h"
@@ -103,3 +106,41 @@ void port_set_saved_word(uint32_t value) {
 uint32_t port_get_saved_word(void) {
     return _ebss;
 }
+
+volatile bool _tick_enabled;
+void board_timerhook(void)
+{
+    // Do things common to all ports when the tick occurs
+    if (_tick_enabled) {
+        supervisor_tick();
+    }
+}
+
+uint64_t port_get_raw_ticks(uint8_t* subticks) {
+    struct timeval tv;
+    gettimeofday(&tv, NULL);
+    long computed_subticks = tv.tv_usec * 1024 * 32 / 1000000;
+    if (subticks != NULL) {
+        *subticks = computed_subticks % 32;
+    }
+
+    return tv.tv_sec * 1024 + computed_subticks / 32;
+}
+
+// Enable 1/1024 second tick.
+void port_enable_tick(void) {
+    _tick_enabled = true;
+}
+
+// Disable 1/1024 second tick.
+void port_disable_tick(void) {
+    _tick_enabled = false;
+}
+
+void port_interrupt_after_ticks(uint32_t ticks) {
+}
+
+void port_sleep_until_interrupt(void) {
+    // TODO: Implement sleep.
+}
+

ports/cxd56/tick.c

@@ -1,36 +0,0 @@
-/*
- * This file is part of the MicroPython project, http://micropython.org/
- *
- * The MIT License (MIT)
- *
- * Copyright 2019 Sony Semiconductor Solutions Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "tick.h"
-
-#include "supervisor/shared/autoreload.h"
-#include "supervisor/shared/tick.h"
-
-void board_timerhook(void)
-{
-    // Do things common to all ports when the tick occurs
-    supervisor_tick();
-}

ports/cxd56/tick.h

@@ -1,32 +0,0 @@
-/*
- * This file is part of the MicroPython project, http://micropython.org/
- *
- * The MIT License (MIT)
- *
- * Copyright 2019 Sony Semiconductor Solutions Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef MICROPY_INCLUDED_CXD56_TICK_H
-#define MICROPY_INCLUDED_CXD56_TICK_H
-
-#include "py/mpconfig.h"
-
-#endif  // MICROPY_INCLUDED_CXD56_TICK_H

shared-module/time/__init__.c

@@ -26,6 +26,7 @@
 
 #include "py/mphal.h"
 #include "supervisor/port.h"
+#include "supervisor/shared/tick.h"
 
 uint64_t common_hal_time_monotonic(void) {
     return supervisor_ticks_ms64();