make translateimgrofybeepboopbop

locale/ID.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -341,12 +341,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "byte > 8 bit tidak didukung"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr "tx dan rx keduanya tidak boleh kosong"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr "Gagal untuk mengalokasikan buffer RX"
 
@@ -355,12 +355,12 @@ msgid "Could not initialize UART"
 msgstr "Tidak dapat menginisialisasi UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr "Tidak pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr "Tidak ada pin TX"
 
@@ -723,7 +723,7 @@ msgstr "Gagal untuk melaporkan nilai atribut, status: 0x%08lX"
 msgid "Failed to read attribute value, err %0x04x"
 msgstr "Gagal untuk membaca nilai atribut, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, fuzzy, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Gagal untuk mendapatkan mutex, status: 0x%08lX"
@@ -733,7 +733,7 @@ msgstr "Gagal untuk mendapatkan mutex, status: 0x%08lX"
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr "Gagal untuk menulis nilai atribut, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Gagal untuk melepaskan mutex, status: 0x%08lX"
@@ -754,51 +754,51 @@ msgstr "Tidak bisa menyesuaikan data ke dalam paket advertisment"
 msgid "Failed to discover services"
 msgstr "Gagal untuk menemukan layanan, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 #, fuzzy
 msgid "Failed to acquire mutex"
 msgstr "Gagal untuk mendapatkan mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 #, fuzzy
 msgid "Failed to release mutex"
 msgstr "Gagal untuk melepaskan mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 #, fuzzy
 msgid "Failed to continue scanning"
 msgstr "Gagal untuk melanjutkan scanning, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 #, fuzzy
 msgid "Failed to connect:"
 msgstr "Gagal untuk menyambungkan, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 #, fuzzy
 msgid "Failed to add service"
 msgstr "Gagal untuk menambahkan layanan, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 #, fuzzy
 msgid "Failed to start advertising"
 msgstr "Gagal untuk memulai advertisement, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 #, fuzzy
 msgid "Failed to stop advertising"
 msgstr "Gagal untuk memberhentikan advertisement, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 #, fuzzy
 msgid "Failed to start scanning"
 msgstr "Gagal untuk melakukan scanning, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 #, fuzzy
 msgid "Failed to create mutex"
 msgstr "Gagal untuk membuat mutex, status: 0x%08lX"
@@ -854,19 +854,19 @@ msgstr "Semua perangkat SPI sedang digunakan"
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 msgid "Invalid buffer size"
 msgstr "Ukuran buffer tidak valid"
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 msgid "Odd parity is not supported"
 msgstr "Parity ganjil tidak didukung"
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 msgid "busio.UART not available"
 msgstr "busio.UART tidak tersedia"
 
@@ -1365,7 +1365,7 @@ msgstr ""
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr ""
 
@@ -2131,7 +2131,7 @@ msgid "buffer must be a bytes-like object"
 msgstr ""
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr ""
 
@@ -2175,15 +2175,33 @@ msgstr "buffers harus mempunyai panjang yang sama"
 msgid "Expected a UUID"
 msgstr ""
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+#, fuzzy
+msgid "Not connected"
+msgstr "Tidak dapat menyambungkan ke AP"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+#, fuzzy
+msgid "timeout must be >= 0.0"
+msgstr "bits harus memilki nilai 8"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 #, fuzzy
 msgid "buffer_size must be >= 1"
 msgstr "buffers harus mempunyai panjang yang sama"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 msgid "Expected a Characteristic"
 msgstr ""
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr ""
@@ -2221,16 +2239,20 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 #, fuzzy
 msgid "Byte buffer must be 16 bytes."
 msgstr "buffers harus mempunyai panjang yang sama"
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2649,11 +2671,6 @@ msgstr ""
 msgid "'S' and 'O' are not supported format types"
 msgstr ""
 
-#: shared-module/struct/__init__.c:128
-#, fuzzy, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr "Gagal untuk megalokasikan buffer RX dari %d byte"
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr ""
@@ -2749,8 +2766,17 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
-#~ msgid "Invalid UUID string length"
+#~ msgid ""
-#~ msgstr "Panjang string UUID tidak valid"
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Silahkan taruh masalah disini dengan isi dari CIRCUITPY drive: anda \n"
+
+#~ msgid "Invalid UUID parameter"
+#~ msgstr "Parameter UUID tidak valid"
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Sepertinya inti kode CircuitPython kita crash dengan sangat keras. Ups!\n"
 
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
@@ -2759,14 +2785,9 @@ msgstr ""
 #~ "tegangan cukup untuk semua sirkuit dan tekan reset (setelah mencabut "
 #~ "CIRCUITPY).\n"
 
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgid "Invalid UUID string length"
-#~ msgstr ""
+#~ msgstr "Panjang string UUID tidak valid"
-#~ "Sepertinya inti kode CircuitPython kita crash dengan sangat keras. Ups!\n"
 
-#~ msgid "Invalid UUID parameter"
+#, fuzzy
-#~ msgstr "Parameter UUID tidak valid"
+#~ msgid "unpack requires a buffer of %d bytes"
-
+#~ msgstr "Gagal untuk megalokasikan buffer RX dari %d byte"
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Silahkan taruh masalah disini dengan isi dari CIRCUITPY drive: anda \n"

locale/circuitpython.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -334,12 +334,12 @@ msgid "bytes > 8 bits not supported"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
@@ -348,12 +348,12 @@ msgid "Could not initialize UART"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr ""
 
@@ -708,7 +708,7 @@ msgstr ""
 msgid "Failed to read attribute value, err %0x04x"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr ""
@@ -718,7 +718,7 @@ msgstr ""
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
@@ -737,43 +737,43 @@ msgstr ""
 msgid "Failed to discover services"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 msgid "Failed to acquire mutex"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 msgid "Failed to release mutex"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 msgid "Failed to continue scanning"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 msgid "Failed to connect:"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 msgid "Failed to add service"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 msgid "Failed to start advertising"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 msgid "Failed to stop advertising"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 msgid "Failed to start scanning"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 msgid "Failed to create mutex"
 msgstr ""
 
@@ -828,19 +828,19 @@ msgstr ""
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 msgid "Invalid buffer size"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 msgid "busio.UART not available"
 msgstr ""
 
@@ -1332,7 +1332,7 @@ msgstr ""
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr ""
 
@@ -2098,7 +2098,7 @@ msgid "buffer must be a bytes-like object"
 msgstr ""
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr ""
 
@@ -2142,14 +2142,30 @@ msgstr ""
 msgid "Expected a UUID"
 msgstr ""
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+msgid "Not connected"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+msgid "timeout must be >= 0.0"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 msgid "buffer_size must be >= 1"
 msgstr ""
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 msgid "Expected a Characteristic"
 msgstr ""
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr ""
@@ -2186,15 +2202,19 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 msgid "Byte buffer must be 16 bytes."
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2612,11 +2632,6 @@ msgstr ""
 msgid "'S' and 'O' are not supported format types"
 msgstr ""
 
-#: shared-module/struct/__init__.c:128
-#, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr ""
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr ""

locale/de_DE.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Sebastian Plamauer\n"
 "Language-Team: \n"
@@ -338,12 +338,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes mit merh als 8 bits werden nicht unterstützt"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr "tx und rx können nicht beide None sein"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr "Konnte keinen RX Buffer allozieren"
 
@@ -352,12 +352,12 @@ msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr "Kein RX Pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr "Kein TX Pin"
 
@@ -508,7 +508,8 @@ msgstr "Dateisystem kann nicht wieder gemounted werden."
 
 #: ports/esp8266/common-hal/storage/__init__.c:38
 msgid "Use esptool to erase flash and re-upload Python instead"
-msgstr "Benutze esptool um den flash zu löschen und stattdessen Python hochzuladen"
+msgstr ""
+"Benutze esptool um den flash zu löschen und stattdessen Python hochzuladen"
 
 #: ports/esp8266/esp_mphal.c:154
 msgid "C-level assert"
@@ -717,7 +718,7 @@ msgstr "Kann den Attributwert nicht mitteilen. Status: 0x%04x"
 msgid "Failed to read attribute value, err %0x04x"
 msgstr "Kann den Attributwert nicht lesen. Status: 0x%04x"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, fuzzy, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Kann den Attributwert nicht lesen. Status: 0x%04x"
@@ -727,7 +728,7 @@ msgstr "Kann den Attributwert nicht lesen. Status: 0x%04x"
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr "Kann den Attributwert nicht schreiben. Status: 0x%04x"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Mutex konnte nicht freigegeben werden. Status: 0x%04x"
@@ -748,51 +749,51 @@ msgstr "Daten sind zu groß für das advertisement packet"
 msgid "Failed to discover services"
 msgstr "Es konnten keine Dienste gefunden werden"
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 #, fuzzy
 msgid "Failed to acquire mutex"
 msgstr "Akquirieren des Mutex gescheitert"
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 #, fuzzy
 msgid "Failed to release mutex"
 msgstr "Loslassen des Mutex gescheitert"
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 #, fuzzy
 msgid "Failed to continue scanning"
 msgstr "Der Scanvorgang kann nicht fortgesetzt werden"
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 #, fuzzy
 msgid "Failed to connect:"
 msgstr "Das Verbinden ist fehlgeschlagen:"
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 #, fuzzy
 msgid "Failed to add service"
 msgstr "Dienst konnte nicht hinzugefügt werden"
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 #, fuzzy
 msgid "Failed to start advertising"
 msgstr "Kann advertisement nicht starten"
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 #, fuzzy
 msgid "Failed to stop advertising"
 msgstr "Kann advertisement nicht stoppen"
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 #, fuzzy
 msgid "Failed to start scanning"
 msgstr "Der Scanvorgang kann nicht gestartet werden"
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 #, fuzzy
 msgid "Failed to create mutex"
 msgstr "Erstellen des Mutex ist fehlgeschlagen"
@@ -850,21 +851,21 @@ msgstr "Alle SPI-Peripheriegeräte sind in Benutzung"
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "Ungültige Puffergröße"
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "bytes mit mehr als 8 bits werden nicht unterstützt"
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 msgid "busio.UART not available"
 msgstr "Kann busio.UART nicht finden"
 
@@ -1360,7 +1361,7 @@ msgstr ""
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr ""
 
@@ -2129,7 +2130,7 @@ msgid "buffer must be a bytes-like object"
 msgstr ""
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr ""
 
@@ -2173,16 +2174,35 @@ msgstr "Buffer müssen gleich lang sein"
 msgid "Expected a UUID"
 msgstr ""
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+#, fuzzy
+msgid "Not connected"
+msgstr "Kann nicht zu AP verbinden"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+#, fuzzy
+msgid "timeout must be >= 0.0"
+msgstr "bits müssen 8 sein"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 #, fuzzy
 msgid "buffer_size must be >= 1"
 msgstr "Buffer müssen gleich lang sein"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Kann das Merkmal nicht hinzufügen."
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+#, fuzzy
+msgid "CharacteristicBuffer writing not provided"
+msgstr "Merkmal wird bereits von einem anderen Dienst verwendet."
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr ""
@@ -2220,16 +2240,20 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 #, fuzzy
 msgid "Byte buffer must be 16 bytes."
 msgstr "Buffer müssen gleich lang sein"
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2650,11 +2674,6 @@ msgstr "Kann '/' nicht remounten when USB aktiv ist"
 msgid "'S' and 'O' are not supported format types"
 msgstr ""
 
-#: shared-module/struct/__init__.c:128
-#, fuzzy, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr "Konnte keine RX Buffer mit %d allozieren"
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr ""
@@ -2748,29 +2767,22 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
-#~ msgid "Can not add Characteristic."
+#~ msgid "Invalid UUID string length"
-#~ msgstr "Kann das Merkmal nicht hinzufügen."
+#~ msgstr "Ungültige UUID-Stringlänge"
 
-#~ msgid "Can not add Service."
+#~ msgid "Can encode UUID into the advertisement packet."
-#~ msgstr "Kann den Dienst nicht hinzufügen."
+#~ msgstr "Kann UUID in das advertisement packet kodieren."
 
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgid ""
-#~ msgstr "CircuitPython ist abgestürzt. Ups!\n"
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Bitte erstelle ein issue hier mit dem Inhalt deines CIRCUITPY-speichers:\n"
 
-#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgid "Invalid UUID parameter"
-#~ msgstr "Kann advertisement data nicht anwenden. Status: 0x%02x"
+#~ msgstr "Ungültiger UUID-Parameter"
 
-#~ msgid "Cannot apply GAP parameters."
+#~ msgid "Invalid Service type"
-#~ msgstr "Kann GAP Parameter nicht anwenden."
+#~ msgstr "Ungültiger Diensttyp"
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Kann UUID nicht kodieren, um die Länge zu überprüfen."
-
-#~ msgid "Can not query for the device address."
-#~ msgstr "Kann nicht nach der Geräteadresse suchen."
-
-#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Der Gerätename kann nicht im Stack verwendet werden."
 
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
@@ -2779,19 +2791,30 @@ msgstr ""
 #~ "genug Strom für den ganzen Schaltkreis liefert und drücke reset (nach dem "
 #~ "sicheren Auswerfen von CIRCUITPY.)\n"
 
-#~ msgid "Invalid Service type"
+#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Ungültiger Diensttyp"
+#~ msgstr "Der Gerätename kann nicht im Stack verwendet werden."
 
-#~ msgid "Invalid UUID parameter"
+#~ msgid "Can not query for the device address."
-#~ msgstr "Ungültiger UUID-Parameter"
+#~ msgstr "Kann nicht nach der Geräteadresse suchen."
 
-#~ msgid ""
+#~ msgid "Can not encode UUID, to check length."
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr "Kann UUID nicht kodieren, um die Länge zu überprüfen."
-#~ msgstr ""
-#~ "Bitte erstelle ein issue hier mit dem Inhalt deines CIRCUITPY-speichers:\n"
 
-#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Kann UUID in das advertisement packet kodieren."
+#~ msgstr "Kann GAP Parameter nicht anwenden."
 
-#~ msgid "Invalid UUID string length"
+#~ msgid "Can not apply advertisement data. status: 0x%02x"
-#~ msgstr "Ungültige UUID-Stringlänge"
+#~ msgstr "Kann advertisement data nicht anwenden. Status: 0x%02x"
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr "CircuitPython ist abgestürzt. Ups!\n"
+
+#~ msgid "Can not add Service."
+#~ msgstr "Kann den Dienst nicht hinzufügen."
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Kann das Merkmal nicht hinzufügen."
+
+#, fuzzy
+#~ msgid "unpack requires a buffer of %d bytes"
+#~ msgstr "Konnte keine RX Buffer mit %d allozieren"

locale/en_US.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -334,12 +334,12 @@ msgid "bytes > 8 bits not supported"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
@@ -348,12 +348,12 @@ msgid "Could not initialize UART"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr ""
 
@@ -708,7 +708,7 @@ msgstr ""
 msgid "Failed to read attribute value, err %0x04x"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr ""
@@ -718,7 +718,7 @@ msgstr ""
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
@@ -737,43 +737,43 @@ msgstr ""
 msgid "Failed to discover services"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 msgid "Failed to acquire mutex"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 msgid "Failed to release mutex"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 msgid "Failed to continue scanning"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 msgid "Failed to connect:"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 msgid "Failed to add service"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 msgid "Failed to start advertising"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 msgid "Failed to stop advertising"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 msgid "Failed to start scanning"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 msgid "Failed to create mutex"
 msgstr ""
 
@@ -828,19 +828,19 @@ msgstr ""
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 msgid "Invalid buffer size"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 msgid "busio.UART not available"
 msgstr ""
 
@@ -1332,7 +1332,7 @@ msgstr ""
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr ""
 
@@ -2098,7 +2098,7 @@ msgid "buffer must be a bytes-like object"
 msgstr ""
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr ""
 
@@ -2142,14 +2142,30 @@ msgstr ""
 msgid "Expected a UUID"
 msgstr ""
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+msgid "Not connected"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+msgid "timeout must be >= 0.0"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 msgid "buffer_size must be >= 1"
 msgstr ""
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 msgid "Expected a Characteristic"
 msgstr ""
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr ""
@@ -2186,15 +2202,19 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 msgid "Byte buffer must be 16 bytes."
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2612,11 +2632,6 @@ msgstr ""
 msgid "'S' and 'O' are not supported format types"
 msgstr ""
 
-#: shared-module/struct/__init__.c:128
-#, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr ""
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr ""

locale/es.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -340,12 +340,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits no soportados"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr "Ambos tx y rx no pueden ser None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr "Ha fallado la asignación del buffer RX"
 
@@ -354,12 +354,12 @@ msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr "Sin pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr "Sin pin TX"
 
@@ -720,7 +720,7 @@ msgstr "No se puede notificar el valor del anuncio. status: 0x%02x"
 msgid "Failed to read attribute value, err %0x04x"
 msgstr "No se puede leer el valor del atributo. status 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, fuzzy, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "No se puede adquirir el mutex, status: 0x%08lX"
@@ -730,7 +730,7 @@ msgstr "No se puede adquirir el mutex, status: 0x%08lX"
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr "No se puede escribir el valor del atributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "No se puede liberar el mutex, status: 0x%08lX"
@@ -751,51 +751,51 @@ msgstr "Los datos no caben en el paquete de anuncio."
 msgid "Failed to discover services"
 msgstr "No se puede descubrir servicios, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 #, fuzzy
 msgid "Failed to acquire mutex"
 msgstr "No se puede adquirir el mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 #, fuzzy
 msgid "Failed to release mutex"
 msgstr "No se puede liberar el mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 #, fuzzy
 msgid "Failed to continue scanning"
 msgstr "No se puede iniciar el escaneo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 #, fuzzy
 msgid "Failed to connect:"
 msgstr "No se puede conectar. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 #, fuzzy
 msgid "Failed to add service"
 msgstr "No se puede detener el anuncio. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 #, fuzzy
 msgid "Failed to start advertising"
 msgstr "No se puede inicar el anuncio. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 #, fuzzy
 msgid "Failed to stop advertising"
 msgstr "No se puede detener el anuncio. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 #, fuzzy
 msgid "Failed to start scanning"
 msgstr "No se puede iniciar el escaneo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 #, fuzzy
 msgid "Failed to create mutex"
 msgstr "No se puede leer el valor del atributo. status 0x%02x"
@@ -851,19 +851,19 @@ msgstr "Todos los timers están siendo usados"
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lx"
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 msgid "Invalid buffer size"
 msgstr "Tamaño de buffer inválido"
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 msgid "Odd parity is not supported"
 msgstr "Paridad impar no soportada"
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 msgid "busio.UART not available"
 msgstr "busio.UART no disponible"
 
@@ -1368,7 +1368,7 @@ msgstr ""
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr "buffer demasiado pequeño"
 
@@ -2147,7 +2147,7 @@ msgid "buffer must be a bytes-like object"
 msgstr "buffer debe de ser un objeto bytes-like"
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr "el archivo deberia ser una archivo abierto en modo byte"
 
@@ -2192,16 +2192,34 @@ msgstr "palette debe ser 32 bytes de largo"
 msgid "Expected a UUID"
 msgstr "Se espera un %q"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+#, fuzzy
+msgid "Not connected"
+msgstr "No se puede conectar a AP"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+#, fuzzy
+msgid "timeout must be >= 0.0"
+msgstr "bits debe ser 8"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 #, fuzzy
 msgid "buffer_size must be >= 1"
 msgstr "los buffers deben de tener la misma longitud"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "No se puede agregar la Característica."
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr "No se pueden agregar servicio en modo Central"
@@ -2239,16 +2257,20 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 #, fuzzy
 msgid "Byte buffer must be 16 bytes."
 msgstr "buffer debe de ser un objeto bytes-like"
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2673,11 +2695,6 @@ msgstr "No se puede volver a montar '/' cuando el USB esta activo."
 msgid "'S' and 'O' are not supported format types"
 msgstr "'S' y 'O' no son compatibles con los tipos de formato"
 
-#: shared-module/struct/__init__.c:128
-#, fuzzy, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr "Falló la asignación del buffer RX de %d bytes"
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr "demasiados argumentos provistos con el formato dado"
@@ -2781,42 +2798,21 @@ msgstr ""
 "El botón reset fue presionado mientras arrancaba CircuitPython. Presiona "
 "otra vez para salir del modo seguro.\n"
 
-#~ msgid "Baud rate too high for this SPI peripheral"
+#~ msgid "Invalid UUID string length"
-#~ msgstr "Baud rate demasiado alto para este periférico SPI"
+#~ msgstr "Longitud de string UUID inválida"
 
-#~ msgid "Invalid Service type"
+#~ msgid "Invalid UUID parameter"
-#~ msgstr "Tipo de Servicio inválido"
+#~ msgstr "Parámetro UUID inválido"
 
-#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgid "Can not query for the device address."
-#~ msgstr "No se puede aplicar los datos de anuncio. status: 0x%02x"
+#~ msgstr "No se puede consultar la dirección del dispositivo."
 
-#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr "Se puede codificar el UUID en el paquete de anuncio."
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "No se puede codificar el UUID, para revisar la longitud."
-
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "No se pueden aplicar los parámetros GAP."
-
-#~ msgid "Can not add Service."
-#~ msgstr "No se puede agregar el Servicio."
-
-#~ msgid "Wrong number of bytes provided"
-#~ msgstr "Numero erroneo de bytes dados"
-
-#~ msgid "Wrong address length"
-#~ msgstr "Longitud de address erronea"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
 #~ msgstr ""
-#~ "Por favor registra un issue en la siguiente URL con el contenidos de tu "
+#~ "Parece que nuestro código CircuitPython dejó de funcionar. Whoops!\n"
-#~ "unidad de almacenamiento CIRCUITPY:\n"
 
-#~ msgid "Can not apply device name in the stack."
+#~ msgid "Cannot set PPCP parameters."
-#~ msgstr "No se puede aplicar el nombre del dispositivo en el stack."
+#~ msgstr "No se pueden establecer los parámetros PPCP."
 
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
@@ -2825,18 +2821,43 @@ msgstr ""
 #~ "suficiente poder para todo el circuito y presiona reset (después de "
 #~ "expulsar CIRCUITPY).\n"
 
-#~ msgid "Cannot set PPCP parameters."
+#~ msgid "Can not apply device name in the stack."
-#~ msgstr "No se pueden establecer los parámetros PPCP."
+#~ msgstr "No se puede aplicar el nombre del dispositivo en el stack."
 
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#, fuzzy
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
 #~ msgstr ""
-#~ "Parece que nuestro código CircuitPython dejó de funcionar. Whoops!\n"
+#~ "Por favor registra un issue en la siguiente URL con el contenidos de tu "
+#~ "unidad de almacenamiento CIRCUITPY:\n"
 
-#~ msgid "Can not query for the device address."
+#~ msgid "Wrong address length"
-#~ msgstr "No se puede consultar la dirección del dispositivo."
+#~ msgstr "Longitud de address erronea"
 
-#~ msgid "Invalid UUID parameter"
+#~ msgid "Wrong number of bytes provided"
-#~ msgstr "Parámetro UUID inválido"
+#~ msgstr "Numero erroneo de bytes dados"
 
-#~ msgid "Invalid UUID string length"
+#~ msgid "Can not add Service."
-#~ msgstr "Longitud de string UUID inválida"
+#~ msgstr "No se puede agregar el Servicio."
+
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "No se pueden aplicar los parámetros GAP."
+
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "No se puede codificar el UUID, para revisar la longitud."
+
+#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgstr "Se puede codificar el UUID en el paquete de anuncio."
+
+#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgstr "No se puede aplicar los datos de anuncio. status: 0x%02x"
+
+#~ msgid "Invalid Service type"
+#~ msgstr "Tipo de Servicio inválido"
+
+#~ msgid "Baud rate too high for this SPI peripheral"
+#~ msgstr "Baud rate demasiado alto para este periférico SPI"
+
+#, fuzzy
+#~ msgid "unpack requires a buffer of %d bytes"
+#~ msgstr "Falló la asignación del buffer RX de %d bytes"

locale/fil.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -338,12 +338,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "hindi sinusuportahan ang bytes > 8 bits"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr "tx at rx hindi pwedeng parehas na None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr "Nabigong ilaan ang RX buffer"
 
@@ -352,12 +352,12 @@ msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr "Walang RX pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr "Walang TX pin"
 
@@ -720,7 +720,7 @@ msgstr "Hindi mabalitaan ang attribute value, status: 0x%08lX"
 msgid "Failed to read attribute value, err %0x04x"
 msgstr "Hindi mabasa ang value ng attribute, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, fuzzy, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Nabigo sa pag kuha ng mutex, status: 0x%08lX"
@@ -730,7 +730,7 @@ msgstr "Nabigo sa pag kuha ng mutex, status: 0x%08lX"
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr "Hindi maisulat ang attribute value, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Nabigo sa pagrelease ng mutex, status: 0x%08lX"
@@ -751,51 +751,51 @@ msgstr "Hindi makasya ang data sa loob ng advertisement packet"
 msgid "Failed to discover services"
 msgstr "Nabigo sa pagdiscover ng services, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 #, fuzzy
 msgid "Failed to acquire mutex"
 msgstr "Nabigo sa pag kuha ng mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 #, fuzzy
 msgid "Failed to release mutex"
 msgstr "Nabigo sa pagrelease ng mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 #, fuzzy
 msgid "Failed to continue scanning"
 msgstr "Hindi maituloy ang pag scan, status: 0x%0xlX"
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 #, fuzzy
 msgid "Failed to connect:"
 msgstr "Hindi makaconnect, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 #, fuzzy
 msgid "Failed to add service"
 msgstr "Hindi matagumpay ang paglagay ng service, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 #, fuzzy
 msgid "Failed to start advertising"
 msgstr "Hindi masimulaan ang advertisement, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 #, fuzzy
 msgid "Failed to stop advertising"
 msgstr "Hindi mahinto ang advertisement, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 #, fuzzy
 msgid "Failed to start scanning"
 msgstr "Hindi masimulaan mag i-scan, status: 0x%0xlX"
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 #, fuzzy
 msgid "Failed to create mutex"
 msgstr "Hindi matagumpay ang pagbuo ng mutex, status: 0x%0xlX"
@@ -852,19 +852,19 @@ msgstr "Lahat ng SPI peripherals ay ginagamit"
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 msgid "Invalid buffer size"
 msgstr "Mali ang buffer size"
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 msgid "Odd parity is not supported"
 msgstr "Odd na parity ay hindi supportado"
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 msgid "busio.UART not available"
 msgstr "busio.UART hindi available"
 
@@ -1369,7 +1369,7 @@ msgstr "puno na ang schedule stack"
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr "masyadong maliit ang buffer"
 
@@ -2152,7 +2152,7 @@ msgid "buffer must be a bytes-like object"
 msgstr "buffer ay dapat bytes-like object"
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr "file ay dapat buksan sa byte mode"
 
@@ -2197,16 +2197,34 @@ msgstr "ang palette ay dapat 32 bytes ang haba"
 msgid "Expected a UUID"
 msgstr "Umasa ng %q"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+#, fuzzy
+msgid "Not connected"
+msgstr "Hindi maka connect sa AP"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+#, fuzzy
+msgid "timeout must be >= 0.0"
+msgstr "bits ay dapat walo (8)"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 #, fuzzy
 msgid "buffer_size must be >= 1"
 msgstr "aarehas na haba dapat ang buffer slices"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Hindi mabasa and Characteristic."
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr "Hindi maarang maglagay ng service sa Central mode"
@@ -2244,16 +2262,20 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 #, fuzzy
 msgid "Byte buffer must be 16 bytes."
 msgstr "buffer ay dapat bytes-like object"
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2679,11 +2701,6 @@ msgstr "Hindi ma-remount '/' kapag aktibo ang USB."
 msgid "'S' and 'O' are not supported format types"
 msgstr "Ang 'S' at 'O' ay hindi suportadong uri ng format"
 
-#: shared-module/struct/__init__.c:128
-#, fuzzy, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr "Nabigong ilaan ang RX buffer ng %d bytes"
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr "masyadong maraming mga argumento na ibinigay sa ibinigay na format"
@@ -2787,42 +2804,21 @@ msgstr ""
 "Ang reset button ay pinindot habang nag boot ang CircuitPython. Pindutin "
 "ulit para lumabas sa safe mode.\n"
 
-#, fuzzy
+#~ msgid "Invalid UUID string length"
-#~ msgid "palette must be displayio.Palette"
+#~ msgstr "Mali ang UUID string length"
-#~ msgstr "ang palette ay dapat 32 bytes ang haba"
 
-#~ msgid "Invalid Service type"
+#~ msgid "Invalid UUID parameter"
-#~ msgstr "Mali ang tipo ng serbisyo"
+#~ msgstr "Mali ang UUID parameter"
 
-#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgid "Can not query for the device address."
-#~ msgstr "Hindi ma i-apply ang advertisement data. status: 0x%02x"
+#~ msgstr "Hindi maaaring mag-query para sa address ng device."
 
-#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr "Maaring i-encode ang UUID sa advertisement packet."
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Hindi ma-encode UUID, para suriin ang haba."
-
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Hindi ma-apply ang GAP parameters."
-
-#~ msgid "Can not add Service."
-#~ msgstr "Hindi maidaragdag ang serbisyo."
-
-#~ msgid "Wrong number of bytes provided"
-#~ msgstr "Mali ang bilang ng bytes"
-
-#~ msgid "Wrong address length"
-#~ msgstr "Mali ang address length"
-
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
 #~ msgstr ""
-#~ "Mag-file ng isang isyu dito gamit ang mga nilalaman ng iyong CIRCUITPY "
+#~ "Mukhang ang core CircuitPython code ay nag-crash ng malakas. Aray!\n"
-#~ "drive:\n"
 
-#~ msgid "Can not apply device name in the stack."
+#~ msgid "Cannot set PPCP parameters."
-#~ msgstr "Hindi maaaring ma-aplay ang device name sa stack."
+#~ msgstr "Hindi ma-set ang PPCP parameters."
 
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
@@ -2831,18 +2827,43 @@ msgstr ""
 #~ "ay nagbibigay ng sapat na power para sa buong circuit at i-press ang "
 #~ "reset (pagkatapos i-eject ang CIRCUITPY).\n"
 
-#~ msgid "Cannot set PPCP parameters."
+#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Hindi ma-set ang PPCP parameters."
+#~ msgstr "Hindi maaaring ma-aplay ang device name sa stack."
 
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
 #~ msgstr ""
-#~ "Mukhang ang core CircuitPython code ay nag-crash ng malakas. Aray!\n"
+#~ "Mag-file ng isang isyu dito gamit ang mga nilalaman ng iyong CIRCUITPY "
+#~ "drive:\n"
 
-#~ msgid "Can not query for the device address."
+#~ msgid "Wrong address length"
-#~ msgstr "Hindi maaaring mag-query para sa address ng device."
+#~ msgstr "Mali ang address length"
 
-#~ msgid "Invalid UUID parameter"
+#~ msgid "Wrong number of bytes provided"
-#~ msgstr "Mali ang UUID parameter"
+#~ msgstr "Mali ang bilang ng bytes"
 
-#~ msgid "Invalid UUID string length"
+#~ msgid "Can not add Service."
-#~ msgstr "Mali ang UUID string length"
+#~ msgstr "Hindi maidaragdag ang serbisyo."
+
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Hindi ma-apply ang GAP parameters."
+
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Hindi ma-encode UUID, para suriin ang haba."
+
+#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgstr "Maaring i-encode ang UUID sa advertisement packet."
+
+#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgstr "Hindi ma i-apply ang advertisement data. status: 0x%02x"
+
+#~ msgid "Invalid Service type"
+#~ msgstr "Mali ang tipo ng serbisyo"
+
+#, fuzzy
+#~ msgid "palette must be displayio.Palette"
+#~ msgstr "ang palette ay dapat 32 bytes ang haba"
+
+#, fuzzy
+#~ msgid "unpack requires a buffer of %d bytes"
+#~ msgstr "Nabigong ilaan ang RX buffer ng %d bytes"

locale/fr.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: 2018-12-23 20:05+0100\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -335,12 +335,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "octets > 8 bits non supporté"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr "tx et rx ne peuvent être None tous les deux"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr "Echec de l'allocation du tampon RX"
 
@@ -349,12 +349,12 @@ msgid "Could not initialize UART"
 msgstr "L'UART n'a pu être initialisé"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr "Pas de broche RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr "Pas de broche TX"
 
@@ -717,7 +717,7 @@ msgstr "Impossible de notifier la valeur de l'attribut. status: 0x%08lX"
 msgid "Failed to read attribute value, err %0x04x"
 msgstr "Impossible de lire la valeur de l'attribut. status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, fuzzy, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Echec de l'obtention de mutex, status: 0x%08lX"
@@ -727,7 +727,7 @@ msgstr "Echec de l'obtention de mutex, status: 0x%08lX"
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr "Impossible d'écrire la valeur de l'attribut. status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Impossible de libérer mutex, status: 0x%08lX"
@@ -747,51 +747,51 @@ msgstr ""
 msgid "Failed to discover services"
 msgstr "Echec de la découverte de services, statut: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 #, fuzzy
 msgid "Failed to acquire mutex"
 msgstr "Echec de l'obtention de mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 #, fuzzy
 msgid "Failed to release mutex"
 msgstr "Impossible de libérer mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 #, fuzzy
 msgid "Failed to continue scanning"
 msgstr "Impossible de commencer à scanner. statut: 0x%0xlX"
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 #, fuzzy
 msgid "Failed to connect:"
 msgstr "Connection impossible. statut: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 #, fuzzy
 msgid "Failed to add service"
 msgstr "Echec de l'ajout de service, statut: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 #, fuzzy
 msgid "Failed to start advertising"
 msgstr "Echec de l'ajout de service, statut: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 #, fuzzy
 msgid "Failed to stop advertising"
 msgstr "Echec de l'ajout de service, statut: 0x%08lX"
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 #, fuzzy
 msgid "Failed to start scanning"
 msgstr "Impossible de commencer à scanner, statut: 0x%0xlX"
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 #, fuzzy
 msgid "Failed to create mutex"
 msgstr "Echec de la création de mutex, statut: 0x%0xlX"
@@ -850,21 +850,21 @@ msgstr "Tous les périphériques SPI sont utilisés"
 msgid "error = 0x%08lX"
 msgstr "erreur = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "longueur de tampon invalide"
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "parité impaire non supportée"
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 #, fuzzy
 msgid "busio.UART not available"
 msgstr "busio.UART n'est pas disponible"
@@ -1368,7 +1368,7 @@ msgstr "pile de plannification pleine"
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr "tampon trop petit"
 
@@ -2154,7 +2154,7 @@ msgid "buffer must be a bytes-like object"
 msgstr "le tampon doit être un objet bytes-like"
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr "le fichier doit être un fichier ouvert en mode 'byte'"
 
@@ -2199,16 +2199,34 @@ msgstr "la palette doit être longue de 32 octets"
 msgid "Expected a UUID"
 msgstr "Attendu : %q"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+#, fuzzy
+msgid "Not connected"
+msgstr "Impossible de se connecter à 'AP'"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+#, fuzzy
+msgid "timeout must be >= 0.0"
+msgstr "les bits doivent être 8"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 #, fuzzy
 msgid "buffer_size must be >= 1"
 msgstr "les slices de tampon doivent être de longueurs égales"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Impossible d'ajouter la Characteristic."
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr "Impossible d'ajouter des service en mode Central"
@@ -2246,16 +2264,20 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 #, fuzzy
 msgid "Byte buffer must be 16 bytes."
 msgstr "le tampon doit être un objet bytes-like"
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2703,11 +2725,6 @@ msgstr "'/' ne peut être remonté quand l'USB est actif."
 msgid "'S' and 'O' are not supported format types"
 msgstr "'S' et 'O' ne sont pas des types de format supportés"
 
-#: shared-module/struct/__init__.c:128
-#, fuzzy, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr "Echec de l'allocation de %d octets du tampon RX"
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr "trop d'arguments fournis avec ce format"
@@ -2816,17 +2833,47 @@ msgstr ""
 "Le bouton 'reset' a été appuyé pendant le démarrage de CircuitPython. "
 "Appuyer denouveau pour quitter de le mode sans-échec.\n"
 
-#~ msgid "Cannot set PPCP parameters."
+#~ msgid "Invalid UUID string length"
-#~ msgstr "Impossible d'appliquer les paramètres PPCP"
+#~ msgstr "Longeur de chaîne UUID invalide"
 
-#~ msgid "Can not add Characteristic."
+#~ msgid "Invalid UUID parameter"
-#~ msgstr "Impossible d'ajouter la Characteristic."
+#~ msgstr "Paramètre UUID invalide"
 
-#~ msgid "Can not query for the device address."
+#, fuzzy
-#~ msgstr "Impossible d'obtenir l'adresse du périphérique"
+#~ msgid "palette must be displayio.Palette"
+#~ msgstr "la palette doit être une displayio.Palette"
 
-#~ msgid "Can not add Service."
+#, fuzzy
-#~ msgstr "Impossible d'ajouter le Service"
+#~ msgid "value_size must be power of two"
+#~ msgstr "value_size doit être une puissance de 2"
+
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Impossible d'appliquer les paramètres GAP"
+
+#~ msgid "Invalid Service type"
+#~ msgstr "Type de service invalide"
+
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "SVP, remontez le problème là avec le contenu du lecteur CIRCUITPY:\n"
+
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Impossible d'encoder l'UUID pour vérifier la longueur."
+
+#~ msgid "Wrong address length"
+#~ msgstr "Mauvaise longueur d'adresse"
+
+#, fuzzy
+#~ msgid "Wrong number of bytes provided"
+#~ msgstr "mauvais nombre d'octets fourni'"
+
+#~ msgid "Can not apply device name in the stack."
+#~ msgstr "Impossible d'appliquer le nom de périphérique dans la pile"
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Il semblerait que votre code CircuitPython a durement planté. Oups!\n"
 
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
@@ -2835,44 +2882,18 @@ msgstr ""
 #~ "assez de puissance pour l'ensemble du circuit et appuyez sur "
 #~ "'reset' (après avoir éjecter CIRCUITPY).\n"
 
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgid "Can not add Service."
-#~ msgstr ""
+#~ msgstr "Impossible d'ajouter le Service"
-#~ "Il semblerait que votre code CircuitPython a durement planté. Oups!\n"
 
-#~ msgid "Can not apply device name in the stack."
+#~ msgid "Can not query for the device address."
-#~ msgstr "Impossible d'appliquer le nom de périphérique dans la pile"
+#~ msgstr "Impossible d'obtenir l'adresse du périphérique"
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Impossible d'ajouter la Characteristic."
+
+#~ msgid "Cannot set PPCP parameters."
+#~ msgstr "Impossible d'appliquer les paramètres PPCP"
 
 #, fuzzy
-#~ msgid "Wrong number of bytes provided"
+#~ msgid "unpack requires a buffer of %d bytes"
-#~ msgstr "mauvais nombre d'octets fourni'"
+#~ msgstr "Echec de l'allocation de %d octets du tampon RX"
-
-#~ msgid "Wrong address length"
-#~ msgstr "Mauvaise longueur d'adresse"
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Impossible d'encoder l'UUID pour vérifier la longueur."
-
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "SVP, remontez le problème là avec le contenu du lecteur CIRCUITPY:\n"
-
-#~ msgid "Invalid Service type"
-#~ msgstr "Type de service invalide"
-
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Impossible d'appliquer les paramètres GAP"
-
-#, fuzzy
-#~ msgid "value_size must be power of two"
-#~ msgstr "value_size doit être une puissance de 2"
-
-#, fuzzy
-#~ msgid "palette must be displayio.Palette"
-#~ msgstr "la palette doit être une displayio.Palette"
-
-#~ msgid "Invalid UUID parameter"
-#~ msgstr "Paramètre UUID invalide"
-
-#~ msgid "Invalid UUID string length"
-#~ msgstr "Longeur de chaîne UUID invalide"

locale/it_IT.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -339,12 +339,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "byte > 8 bit non supportati"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr "tx e rx non possono essere entrambi None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr "Impossibile allocare buffer RX"
 
@@ -353,12 +353,12 @@ msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr "Nessun pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr "Nessun pin TX"
 
@@ -719,7 +719,7 @@ msgstr "Impossibile notificare valore dell'attributo. status: 0x%02x"
 msgid "Failed to read attribute value, err %0x04x"
 msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, fuzzy, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
@@ -729,7 +729,7 @@ msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr "Impossibile scrivere valore dell'attributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
@@ -750,51 +750,51 @@ msgstr "Impossibile inserire dati nel pacchetto di advertisement."
 msgid "Failed to discover services"
 msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 #, fuzzy
 msgid "Failed to acquire mutex"
 msgstr "Impossibile allocare buffer RX"
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 #, fuzzy
 msgid "Failed to release mutex"
 msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 #, fuzzy
 msgid "Failed to continue scanning"
 msgstr "Impossible iniziare la scansione. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 #, fuzzy
 msgid "Failed to connect:"
 msgstr "Impossibile connettersi. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 #, fuzzy
 msgid "Failed to add service"
 msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 #, fuzzy
 msgid "Failed to start advertising"
 msgstr "Impossibile avviare advertisement. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 #, fuzzy
 msgid "Failed to stop advertising"
 msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 #, fuzzy
 msgid "Failed to start scanning"
 msgstr "Impossible iniziare la scansione. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 #, fuzzy
 msgid "Failed to create mutex"
 msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
@@ -851,21 +851,21 @@ msgstr "Tutte le periferiche SPI sono in uso"
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "lunghezza del buffer non valida"
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "operazione I2C non supportata"
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 #, fuzzy
 msgid "busio.UART not available"
 msgstr "busio.UART non ancora implementato"
@@ -1368,7 +1368,7 @@ msgstr ""
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr "buffer troppo piccolo"
 
@@ -2151,7 +2151,7 @@ msgid "buffer must be a bytes-like object"
 msgstr ""
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr ""
 
@@ -2196,16 +2196,34 @@ msgstr "la palette deve essere lunga 32 byte"
 msgid "Expected a UUID"
 msgstr "Atteso un %q"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+#, fuzzy
+msgid "Not connected"
+msgstr "Impossible connettersi all'AP"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+#, fuzzy
+msgid "timeout must be >= 0.0"
+msgstr "i bit devono essere 8"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 #, fuzzy
 msgid "buffer_size must be >= 1"
 msgstr "slice del buffer devono essere della stessa lunghezza"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Non è possibile aggiungere Characteristic."
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr ""
@@ -2243,16 +2261,20 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 #, fuzzy
 msgid "Byte buffer must be 16 bytes."
 msgstr "i buffer devono essere della stessa lunghezza"
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2685,11 +2707,6 @@ msgstr "Non è possibile rimontare '/' mentre l'USB è attiva."
 msgid "'S' and 'O' are not supported format types"
 msgstr "'S' e 'O' non sono formati supportati"
 
-#: shared-module/struct/__init__.c:128
-#, fuzzy, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr "Fallita allocazione del buffer RX di %d byte"
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr "troppi argomenti forniti con il formato specificato"
@@ -2785,8 +2802,53 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
-#~ msgid "Cannot apply GAP parameters."
+#~ msgid "Invalid UUID string length"
-#~ msgstr "Impossibile applicare i parametri GAP."
+#~ msgstr "Lunghezza della stringa UUID non valida"
+
+#~ msgid "Invalid UUID parameter"
+#~ msgstr "Parametro UUID non valido"
+
+#~ msgid "Invalid Service type"
+#~ msgstr "Tipo di servizio non valido"
+
+#, fuzzy
+#~ msgid "Wrong number of bytes provided"
+#~ msgstr "numero di argomenti errato"
+
+#~ msgid "Cannot set PPCP parameters."
+#~ msgstr "Impossibile impostare i parametri PPCP."
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Non è possibile aggiungere Characteristic."
+
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Non è possibile codificare l'UUID, lunghezza da controllare."
+
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Ti preghiamo di compilare una issue con il contenuto del tuo drie "
+#~ "CIRCUITPY:\n"
+
+#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgstr "È possibile codificare l'UUID nel pacchetto di advertisement."
+
+#~ msgid "Can not apply device name in the stack."
+#~ msgstr "Non è possibile inserire il nome del dipositivo nella lista."
+
+#~ msgid "Can not add Service."
+#~ msgstr "Non è possibile aggiungere Service."
+
+#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgstr "Impossible inserire dati advertisement. status: 0x%02x"
+
+#~ msgid "Can not query for the device address."
+#~ msgstr "Non è possibile trovare l'indirizzo del dispositivo."
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Sembra che il codice del core di CircuitPython sia crashato malamente. "
+#~ "Whoops!\n"
 
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
@@ -2795,50 +2857,9 @@ msgstr ""
 #~ "abbastanza potenza per l'intero circuito e premere reset (dopo aver "
 #~ "espulso CIRCUITPY).\n"
 
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgid "Cannot apply GAP parameters."
-#~ msgstr ""
+#~ msgstr "Impossibile applicare i parametri GAP."
-#~ "Sembra che il codice del core di CircuitPython sia crashato malamente. "
-#~ "Whoops!\n"
-
-#~ msgid "Can not query for the device address."
-#~ msgstr "Non è possibile trovare l'indirizzo del dispositivo."
-
-#~ msgid "Can not apply advertisement data. status: 0x%02x"
-#~ msgstr "Impossible inserire dati advertisement. status: 0x%02x"
-
-#~ msgid "Can not add Service."
-#~ msgstr "Non è possibile aggiungere Service."
-
-#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Non è possibile inserire il nome del dipositivo nella lista."
-
-#~ msgid "Can encode UUID into the advertisement packet."
-#~ msgstr "È possibile codificare l'UUID nel pacchetto di advertisement."
-
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Ti preghiamo di compilare una issue con il contenuto del tuo drie "
-#~ "CIRCUITPY:\n"
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Non è possibile codificare l'UUID, lunghezza da controllare."
-
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Non è possibile aggiungere Characteristic."
-
-#~ msgid "Cannot set PPCP parameters."
-#~ msgstr "Impossibile impostare i parametri PPCP."
 
 #, fuzzy
-#~ msgid "Wrong number of bytes provided"
+#~ msgid "unpack requires a buffer of %d bytes"
-#~ msgstr "numero di argomenti errato"
+#~ msgstr "Fallita allocazione del buffer RX di %d byte"
-
-#~ msgid "Invalid Service type"
-#~ msgstr "Tipo di servizio non valido"
-
-#~ msgid "Invalid UUID parameter"
-#~ msgstr "Parametro UUID non valido"
-
-#~ msgid "Invalid UUID string length"
-#~ msgstr "Lunghezza della stringa UUID non valida"

locale/pt_BR.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-01-20 22:46-0500\n"
+"POT-Creation-Date: 2019-01-21 21:50-0500\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -334,12 +334,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits não suportado"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:118
+#: ports/nrf/common-hal/busio/UART.c:91
 msgid "tx and rx cannot both be None"
 msgstr "TX e RX não podem ser ambos"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:152
+#: ports/nrf/common-hal/busio/UART.c:132
 msgid "Failed to allocate RX buffer"
 msgstr "Falha ao alocar buffer RX"
 
@@ -348,12 +348,12 @@ msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:197
+#: ports/nrf/common-hal/busio/UART.c:174
 msgid "No RX pin"
 msgstr "Nenhum pino RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:232
+#: ports/nrf/common-hal/busio/UART.c:209
 msgid "No TX pin"
 msgstr "Nenhum pino TX"
 
@@ -711,7 +711,7 @@ msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
 msgid "Failed to read attribute value, err %0x04x"
 msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:172
+#: ports/nrf/common-hal/bleio/Characteristic.c:172 ports/nrf/sd_mutex.c:34
 #, fuzzy, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
@@ -721,7 +721,7 @@ msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
 msgid "Failed to write attribute value, err 0x%04x"
 msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Characteristic.c:189
+#: ports/nrf/common-hal/bleio/Characteristic.c:189 ports/nrf/sd_mutex.c:54
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
@@ -742,49 +742,49 @@ msgstr "Não é possível ajustar dados no pacote de anúncios."
 msgid "Failed to discover services"
 msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:267
+#: ports/nrf/common-hal/bleio/Device.c:268
-#: ports/nrf/common-hal/bleio/Device.c:300
+#: ports/nrf/common-hal/bleio/Device.c:302
 #, fuzzy
 msgid "Failed to acquire mutex"
 msgstr "Falha ao alocar buffer RX"
 
-#: ports/nrf/common-hal/bleio/Device.c:278
+#: ports/nrf/common-hal/bleio/Device.c:280
-#: ports/nrf/common-hal/bleio/Device.c:311
+#: ports/nrf/common-hal/bleio/Device.c:313
-#: ports/nrf/common-hal/bleio/Device.c:342
+#: ports/nrf/common-hal/bleio/Device.c:344
-#: ports/nrf/common-hal/bleio/Device.c:376
+#: ports/nrf/common-hal/bleio/Device.c:378
 #, fuzzy
 msgid "Failed to release mutex"
 msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:387
+#: ports/nrf/common-hal/bleio/Device.c:389
 msgid "Failed to continue scanning"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:419
+#: ports/nrf/common-hal/bleio/Device.c:421
 msgid "Failed to connect:"
 msgstr ""
 
-#: ports/nrf/common-hal/bleio/Device.c:489
+#: ports/nrf/common-hal/bleio/Device.c:491
 #, fuzzy
 msgid "Failed to add service"
 msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:506
+#: ports/nrf/common-hal/bleio/Device.c:508
 #, fuzzy
 msgid "Failed to start advertising"
 msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:523
+#: ports/nrf/common-hal/bleio/Device.c:525
 #, fuzzy
 msgid "Failed to stop advertising"
 msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:548
+#: ports/nrf/common-hal/bleio/Device.c:550
 #, fuzzy
 msgid "Failed to start scanning"
 msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
-#: ports/nrf/common-hal/bleio/Device.c:564
+#: ports/nrf/common-hal/bleio/Device.c:566
 #, fuzzy
 msgid "Failed to create mutex"
 msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
@@ -840,21 +840,21 @@ msgstr "Todos os periféricos SPI estão em uso"
 msgid "error = 0x%08lX"
 msgstr "erro = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:122
+#: ports/nrf/common-hal/busio/UART.c:95
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "Arquivo inválido"
 
-#: ports/nrf/common-hal/busio/UART.c:126
+#: ports/nrf/common-hal/busio/UART.c:99
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "I2C operação não suportada"
 
-#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:335 ports/nrf/common-hal/busio/UART.c:339
-#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:344 ports/nrf/common-hal/busio/UART.c:349
-#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:365 ports/nrf/common-hal/busio/UART.c:369
-#: ports/nrf/common-hal/busio/UART.c:400
+#: ports/nrf/common-hal/busio/UART.c:377
 msgid "busio.UART not available"
 msgstr "busio.UART não disponível"
 
@@ -1350,7 +1350,7 @@ msgstr ""
 
 #: py/modstruct.c:148 py/modstruct.c:156 py/modstruct.c:244 py/modstruct.c:254
 #: shared-bindings/struct/__init__.c:102 shared-bindings/struct/__init__.c:161
-#: shared-module/struct/__init__.c:183
+#: shared-module/struct/__init__.c:128 shared-module/struct/__init__.c:183
 msgid "buffer too small"
 msgstr ""
 
@@ -2119,7 +2119,7 @@ msgid "buffer must be a bytes-like object"
 msgstr ""
 
 #: shared-bindings/audioio/WaveFile.c:78
-#: shared-bindings/displayio/OnDiskBitmap.c:85
+#: shared-bindings/displayio/OnDiskBitmap.c:87
 msgid "file must be a file opened in byte mode"
 msgstr ""
 
@@ -2164,16 +2164,34 @@ msgstr "buffers devem ser o mesmo tamanho"
 msgid "Expected a UUID"
 msgstr "Esperado um"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:61
+#: shared-bindings/bleio/CharacteristicBuffer.c:39
+#, fuzzy
+msgid "Not connected"
+msgstr "Não é possível conectar-se ao AP"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:74
+#, fuzzy
+msgid "timeout must be >= 0.0"
+msgstr "bits devem ser 8"
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:79
 #, fuzzy
 msgid "buffer_size must be >= 1"
 msgstr "buffers devem ser o mesmo tamanho"
 
-#: shared-bindings/bleio/CharacteristicBuffer.c:65
+#: shared-bindings/bleio/CharacteristicBuffer.c:83
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Não é possível adicionar Característica."
 
+#: shared-bindings/bleio/CharacteristicBuffer.c:138
+msgid "CharacteristicBuffer writing not provided"
+msgstr ""
+
+#: shared-bindings/bleio/CharacteristicBuffer.c:147
+msgid "Not connected."
+msgstr ""
+
 #: shared-bindings/bleio/Device.c:210
 msgid "Can't add services in Central mode"
 msgstr ""
@@ -2211,16 +2229,20 @@ msgstr ""
 msgid "UUID integer value not in range 0 to 0xffff"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:75
+#: shared-bindings/bleio/UUID.c:91
-msgid "UUID value is not int or byte buffer"
+msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
 msgstr ""
 
-#: shared-bindings/bleio/UUID.c:79
+#: shared-bindings/bleio/UUID.c:103
+msgid "UUID value is not str, int or byte buffer"
+msgstr ""
+
+#: shared-bindings/bleio/UUID.c:107
 #, fuzzy
 msgid "Byte buffer must be 16 bytes."
 msgstr "buffers devem ser o mesmo tamanho"
 
-#: shared-bindings/bleio/UUID.c:120
+#: shared-bindings/bleio/UUID.c:151
 msgid "not a 128-bit UUID"
 msgstr ""
 
@@ -2642,11 +2664,6 @@ msgstr "Não é possível remontar '/' enquanto o USB estiver ativo."
 msgid "'S' and 'O' are not supported format types"
 msgstr "'S' e 'O' não são tipos de formato suportados"
 
-#: shared-module/struct/__init__.c:128
-#, fuzzy, c-format
-msgid "unpack requires a buffer of %d bytes"
-msgstr "Falha ao alocar buffer RX de %d bytes"
-
 #: shared-module/struct/__init__.c:136
 msgid "too many arguments provided with the given format"
 msgstr "Muitos argumentos fornecidos com o formato dado"
@@ -2736,32 +2753,36 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
-#~ msgid "Cannot set PPCP parameters."
+#~ msgid "Can not query for the device address."
-#~ msgstr "Não é possível definir parâmetros PPCP."
+#~ msgstr "Não é possível consultar o endereço do dispositivo."
-
-#~ msgid "Can encode UUID into the advertisement packet."
-#~ msgstr "Pode codificar o UUID no pacote de anúncios."
-
-#~ msgid "Can not apply advertisement data. status: 0x%02x"
-#~ msgstr "Não é possível aplicar dados de anúncio. status: 0x%02x"
-
-#~ msgid "Invalid UUID parameter"
-#~ msgstr "Parâmetro UUID inválido"
-
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Não é possível aplicar parâmetros GAP."
-
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Não é possível adicionar Característica."
-
-#~ msgid "Baud rate too high for this SPI peripheral"
-#~ msgstr "Taxa de transmissão muito alta para esse periférico SPI"
-
-#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Não é possível aplicar o nome do dispositivo na pilha."
 
 #~ msgid "Invalid Service type"
 #~ msgstr "Tipo de serviço inválido"
 
-#~ msgid "Can not query for the device address."
+#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Não é possível consultar o endereço do dispositivo."
+#~ msgstr "Não é possível aplicar o nome do dispositivo na pilha."
+
+#~ msgid "Baud rate too high for this SPI peripheral"
+#~ msgstr "Taxa de transmissão muito alta para esse periférico SPI"
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Não é possível adicionar Característica."
+
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Não é possível aplicar parâmetros GAP."
+
+#~ msgid "Invalid UUID parameter"
+#~ msgstr "Parâmetro UUID inválido"
+
+#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgstr "Não é possível aplicar dados de anúncio. status: 0x%02x"
+
+#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgstr "Pode codificar o UUID no pacote de anúncios."
+
+#~ msgid "Cannot set PPCP parameters."
+#~ msgstr "Não é possível definir parâmetros PPCP."
+
+#, fuzzy
+#~ msgid "unpack requires a buffer of %d bytes"
+#~ msgstr "Falha ao alocar buffer RX de %d bytes"