From 47849a9e58d5f6d06bb92e00b3de567da1a356dd Mon Sep 17 00:00:00 2001 From: sommersoft Date: Mon, 29 Jun 2020 18:18:25 -0500 Subject: [PATCH 1/9] add custom css for 'viewing-old-docs' message --- docs/static/customstyle.css | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/docs/static/customstyle.css b/docs/static/customstyle.css index 6c964b762c..1136edcd31 100644 --- a/docs/static/customstyle.css +++ b/docs/static/customstyle.css @@ -10,6 +10,19 @@ } +/* custom CSS to sticky the ' viewing outdated version' + warning +*/ +.document > .admonition { + position: sticky; + top: 0px; + background-color: salmon; + z-index: 2; +} + +body { + overflow-x: unset!important; +} /* override table width restrictions */ @media screen and (min-width: 767px) { From 119e9d38202cb26f7f04d1050263e27e1083865a Mon Sep 17 00:00:00 2001 From: jgillick Date: Mon, 16 Nov 2020 23:50:00 -0800 Subject: [PATCH 2/9] Add Thunderpack 1.2 --- ports/stm/boards/thunderpack_v12/board.c | 38 ++ .../boards/thunderpack_v12/mpconfigboard.h | 61 +++ .../boards/thunderpack_v12/mpconfigboard.mk | 20 + ports/stm/boards/thunderpack_v12/pins.c | 39 ++ .../thunderpack_v12/stm32f4xx_hal_conf.h | 440 ++++++++++++++++++ ports/stm/common-hal/microcontroller/Pin.c | 33 ++ 6 files changed, 631 insertions(+) create mode 100644 ports/stm/boards/thunderpack_v12/board.c create mode 100644 ports/stm/boards/thunderpack_v12/mpconfigboard.h create mode 100644 ports/stm/boards/thunderpack_v12/mpconfigboard.mk create mode 100644 ports/stm/boards/thunderpack_v12/pins.c create mode 100644 ports/stm/boards/thunderpack_v12/stm32f4xx_hal_conf.h diff --git a/ports/stm/boards/thunderpack_v12/board.c b/ports/stm/boards/thunderpack_v12/board.c new file mode 100644 index 0000000000..4421970eef --- /dev/null +++ b/ports/stm/boards/thunderpack_v12/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.h b/ports/stm/boards/thunderpack_v12/mpconfigboard.h new file mode 100644 index 0000000000..4c71b8aeb2 --- /dev/null +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.h @@ -0,0 +1,61 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#define MICROPY_HW_BOARD_NAME "THUNDERPACK_v12" +#define MICROPY_HW_MCU_NAME "STM32F411CE" + +// Non-volatile memory config +#define CIRCUITPY_INTERNAL_NVM_SIZE (0x4000) +#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x08010000) +#define CIRCUITPY_INTERNAL_NVM_SECTOR FLASH_SECTOR_4 + +// Putting the entire flash sector in the NVM byte array buffer +// would take up too much RAM. This limits how much of the sector we use. +#define NVM_BYTEARRAY_BUFFER_SIZE 512 + +// Flash config +#define FLASH_SIZE (0x80000) +#define FLASH_PAGE_SIZE (0x4000) +#define BOARD_FLASH_SIZE (FLASH_SIZE - CIRCUITPY_INTERNAL_NVM_SIZE- 0x2000 - 0xC000) + +// On-board flash +#define SPI_FLASH_MOSI_PIN (&pin_PB15) +#define SPI_FLASH_MISO_PIN (&pin_PB14) +#define SPI_FLASH_SCK_PIN (&pin_PB13) +#define SPI_FLASH_CS_PIN (&pin_PB12) + +// Status LEDs +#define MICROPY_HW_LED_STATUS (&pin_PA02) +#define MICROPY_HW_APA102_MOSI (&pin_PB08) +#define MICROPY_HW_APA102_SCK (&pin_PB00) + +// I2C +#define DEFAULT_I2C_BUS_SCL (&pin_PB06) +#define DEFAULT_I2C_BUS_SDA (&pin_PB07) + +// General config +#define BOARD_OSC_DIV (24) +#define BOARD_OVERWRITE_SWD (1) +#define BOARD_NO_VBUS_SENSE (1) \ No newline at end of file diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk new file mode 100644 index 0000000000..d11cfb7505 --- /dev/null +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk @@ -0,0 +1,20 @@ +USB_VID = 0x239A +USB_PID = 0x806A +USB_PRODUCT = "Thunderpack STM32F411" +USB_MANUFACTURER = "Jeremy Gillick" +USB_DEVICES = "CDC,MSC" + +LONGINT_IMPL = NONE + +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = GD25Q16C + +CIRCUITPY_NVM = 1 + +MCU_SERIES = F4 +MCU_VARIANT = STM32F411xE +MCU_PACKAGE = UFQFPN48 + +LD_COMMON = boards/common_nvm.ld +LD_FILE = boards/STM32F411_nvm.ld diff --git a/ports/stm/boards/thunderpack_v12/pins.c b/ports/stm/boards/thunderpack_v12/pins.c new file mode 100644 index 0000000000..1e07621eaa --- /dev/null +++ b/ports/stm/boards/thunderpack_v12/pins.c @@ -0,0 +1,39 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + { MP_ROM_QSTR(MP_QSTR_PA0), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_PA1), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_PA2), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_PA3), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_PA4), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_PA5), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_PA6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_PA7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_PA8), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_PA9), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_PA10), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_PA13), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_PA14), MP_ROM_PTR(&pin_PA14) }, + + { MP_ROM_QSTR(MP_QSTR_PB0), MP_ROM_PTR(&pin_PB00) }, + { MP_ROM_QSTR(MP_QSTR_PB5), MP_ROM_PTR(&pin_PB05) }, + { MP_ROM_QSTR(MP_QSTR_PB6), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_PB7), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_PB8), MP_ROM_PTR(&pin_PB08) }, + + { MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_LED3), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_LED4), MP_ROM_PTR(&pin_PA03) }, + + { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_PB04) }, + + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB07) }, + + { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_PB00) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); diff --git a/ports/stm/boards/thunderpack_v12/stm32f4xx_hal_conf.h b/ports/stm/boards/thunderpack_v12/stm32f4xx_hal_conf.h new file mode 100644 index 0000000000..5cb5634223 --- /dev/null +++ b/ports/stm/boards/thunderpack_v12/stm32f4xx_hal_conf.h @@ -0,0 +1,440 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32f4xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +#define HAL_DAC_MODULE_ENABLED +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)24000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)40000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) + +#define PHY_READ_TO ((uint32_t)0x0000FFFFU) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm/common-hal/microcontroller/Pin.c b/ports/stm/common-hal/microcontroller/Pin.c index 2c513f4aad..cf5cd754f4 100644 --- a/ports/stm/common-hal/microcontroller/Pin.c +++ b/ports/stm/common-hal/microcontroller/Pin.c @@ -35,6 +35,10 @@ #ifdef MICROPY_HW_NEOPIXEL bool neopixel_in_use; #endif +#ifdef MICROPY_HW_APA102_MOSI +bool apa102_sck_in_use; +bool apa102_mosi_in_use; +#endif #if defined(LQFP144) #define GPIO_PORT_COUNT 7 @@ -66,6 +70,10 @@ void reset_all_pins(void) { #ifdef MICROPY_HW_NEOPIXEL neopixel_in_use = false; #endif + #ifdef MICROPY_HW_APA102_MOSI + apa102_sck_in_use = false; + apa102_mosi_in_use = false; + #endif } // Mark pin as free and return it to a quiescent state. @@ -85,6 +93,15 @@ void reset_pin_number(uint8_t pin_port, uint8_t pin_number) { return; } #endif + #ifdef MICROPY_HW_APA102_MOSI + if ((pin_port == MICROPY_HW_APA102_MOSI->port && pin_number == MICROPY_HW_APA102_MOSI->number) + || (pin_port == MICROPY_HW_APA102_SCK->port && pin_number == MICROPY_HW_APA102_MOSI->number)) { + apa102_mosi_in_use = false; + apa102_sck_in_use = false; + rgb_led_status_init(); + return; + } + #endif } void never_reset_pin_number(uint8_t pin_port, uint8_t pin_number) { @@ -108,6 +125,14 @@ void claim_pin(const mcu_pin_obj_t* pin) { neopixel_in_use = true; } #endif + #ifdef MICROPY_HW_APA102_MOSI + if (pin == MICROPY_HW_APA102_MOSI) { + apa102_mosi_in_use = true; + } + if (pin == MICROPY_HW_APA102_SCK) { + apa102_sck_in_use = true; + } + #endif } bool pin_number_is_free(uint8_t pin_port, uint8_t pin_number) { @@ -120,6 +145,14 @@ bool common_hal_mcu_pin_is_free(const mcu_pin_obj_t *pin) { return !neopixel_in_use; } #endif + #ifdef MICROPY_HW_APA102_MOSI + if (pin == MICROPY_HW_APA102_MOSI) { + return !apa102_mosi_in_use; + } + if (pin == MICROPY_HW_APA102_SCK) { + return !apa102_sck_in_use; + } + #endif return pin_number_is_free(pin->port, pin->number); } From 0b858440b0d64ede9e340de4862684c8be2b5b2b Mon Sep 17 00:00:00 2001 From: jgillick Date: Sun, 22 Nov 2020 01:15:05 -0800 Subject: [PATCH 3/9] Fix formatting. --- ports/stm/common-hal/microcontroller/Pin.c | 174 +++++++++------------ 1 file changed, 77 insertions(+), 97 deletions(-) diff --git a/ports/stm/common-hal/microcontroller/Pin.c b/ports/stm/common-hal/microcontroller/Pin.c index 547ac87ae1..4b68d205bf 100644 --- a/ports/stm/common-hal/microcontroller/Pin.c +++ b/ports/stm/common-hal/microcontroller/Pin.c @@ -41,170 +41,150 @@ bool apa102_mosi_in_use; #endif #if defined(TFBGA216) -GPIO_TypeDef *ports[] = {GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH, GPIOI, GPIOJ, GPIOK}; + GPIO_TypeDef * ports[] = {GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH, GPIOI, GPIOJ, GPIOK}; #elif defined(LQFP144) -GPIO_TypeDef *ports[] = {GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG}; + GPIO_TypeDef * ports[] = {GPIOA, GPIOB, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG}; #elif defined(LQFP100_f4) || (LQFP100_x7) -GPIO_TypeDef *ports[] = {GPIOA, GPIOB, GPIOC, GPIOD, GPIOE}; + GPIO_TypeDef * ports[] = {GPIOA, GPIOB, GPIOC, GPIOD, GPIOE}; #elif defined(LQFP64) -GPIO_TypeDef *ports[] = {GPIOA, GPIOB, GPIOC, GPIOD}; + GPIO_TypeDef * ports[] = {GPIOA, GPIOB, GPIOC, GPIOD}; #elif defined(UFQFPN48) -GPIO_TypeDef *ports[] = {GPIOA, GPIOB, GPIOC}; + GPIO_TypeDef * ports[] = {GPIOA, GPIOB, GPIOC}; #endif + #define GPIO_PORT_COUNT (MP_ARRAY_SIZE(ports)) STATIC uint16_t claimed_pins[GPIO_PORT_COUNT]; STATIC uint16_t __ALIGNED(4) never_reset_pins[GPIO_PORT_COUNT]; -void reset_all_pins(void) -{ +void reset_all_pins(void) { // Reset claimed pins - for (uint8_t i = 0; i < GPIO_PORT_COUNT; i++) - { + for (uint8_t i = 0; i < GPIO_PORT_COUNT; i++) { claimed_pins[i] = never_reset_pins[i]; } - for (uint8_t i = 0; i < GPIO_PORT_COUNT; i++) - { + for (uint8_t i = 0; i < GPIO_PORT_COUNT; i++) { HAL_GPIO_DeInit(ports[i], ~never_reset_pins[i]); } -#ifdef MICROPY_HW_NEOPIXEL + #ifdef MICROPY_HW_NEOPIXEL neopixel_in_use = false; -#endif -#ifdef MICROPY_HW_APA102_MOSI - apa102_sck_in_use = false; - apa102_mosi_in_use = false; -#endif + #endif + #ifdef MICROPY_HW_APA102_MOSI + apa102_sck_in_use = false; + apa102_mosi_in_use = false; + #endif } // Mark pin as free and return it to a quiescent state. -void reset_pin_number(uint8_t pin_port, uint8_t pin_number) -{ - if (pin_number == NO_PIN) - { +void reset_pin_number(uint8_t pin_port, uint8_t pin_number) { + if ( pin_number == NO_PIN ) { return; } - if (pin_port == 0x0F) - { + if (pin_port == 0x0F) { return; } // Clear claimed bit & reset - claimed_pins[pin_port] &= ~(1 << pin_number); - never_reset_pins[pin_port] &= ~(1 << pin_number); - HAL_GPIO_DeInit(ports[pin_port], 1 << pin_number); + claimed_pins[pin_port] &= ~(1<port && pin_number == MICROPY_HW_NEOPIXEL->number) - { + #ifdef MICROPY_HW_NEOPIXEL + if (pin_port == MICROPY_HW_NEOPIXEL->port && pin_number == MICROPY_HW_NEOPIXEL->number) { neopixel_in_use = false; rgb_led_status_init(); return; } -#endif -#ifdef MICROPY_HW_APA102_MOSI - if ((pin_port == MICROPY_HW_APA102_MOSI->port && pin_number == MICROPY_HW_APA102_MOSI->number) || (pin_port == MICROPY_HW_APA102_SCK->port && pin_number == MICROPY_HW_APA102_MOSI->number)) - { - apa102_mosi_in_use = false; - apa102_sck_in_use = false; - rgb_led_status_init(); - return; - } -#endif + #endif + #ifdef MICROPY_HW_APA102_MOSI + if ((pin_port == MICROPY_HW_APA102_MOSI->port && pin_number == MICROPY_HW_APA102_MOSI->number) || (pin_port == MICROPY_HW_APA102_SCK->port && pin_number == MICROPY_HW_APA102_MOSI->number)) + { + apa102_mosi_in_use = false; + apa102_sck_in_use = false; + rgb_led_status_init(); + return; + } + #endif } -void never_reset_pin_number(uint8_t pin_port, uint8_t pin_number) -{ - if (pin_number == NO_PIN) - { +void never_reset_pin_number(uint8_t pin_port, uint8_t pin_number) { + if ( pin_number == NO_PIN ) { return; } - never_reset_pins[pin_port] |= 1 << pin_number; + never_reset_pins[pin_port] |= 1<port, pin->number); } -void common_hal_reset_pin(const mcu_pin_obj_t *pin) -{ +void common_hal_reset_pin(const mcu_pin_obj_t* pin) { reset_pin_number(pin->port, pin->number); } -void claim_pin(uint8_t pin_port, uint8_t pin_number) -{ +void claim_pin(uint8_t pin_port, uint8_t pin_number) { // Set bit in claimed_pins bitmask. - claimed_pins[pin_port] |= 1 << pin_number; + claimed_pins[pin_port] |= 1<port, pin->number); } -GPIO_TypeDef *pin_port(uint8_t pin_port) -{ +GPIO_TypeDef * pin_port(uint8_t pin_port) { return ports[pin_port]; } -uint16_t pin_mask(uint8_t pin_number) -{ - return 1 << pin_number; +uint16_t pin_mask(uint8_t pin_number) { + return 1<port * 16 + pin->number; } -void common_hal_mcu_pin_claim(const mcu_pin_obj_t *pin) -{ +void common_hal_mcu_pin_claim(const mcu_pin_obj_t* pin) { claim_pin(pin->port, pin->number); -#ifdef MICROPY_HW_NEOPIXEL - if (pin == MICROPY_HW_NEOPIXEL) - { + #ifdef MICROPY_HW_NEOPIXEL + if (pin == MICROPY_HW_NEOPIXEL) { neopixel_in_use = true; } -#endif -#ifdef MICROPY_HW_APA102_MOSI - if (pin == MICROPY_HW_APA102_MOSI) - { - apa102_mosi_in_use = true; - } - if (pin == MICROPY_HW_APA102_SCK) - { - apa102_sck_in_use = true; - } -#endif + #endif + #ifdef MICROPY_HW_APA102_MOSI + if (pin == MICROPY_HW_APA102_MOSI) + { + apa102_mosi_in_use = true; + } + if (pin == MICROPY_HW_APA102_SCK) + { + apa102_sck_in_use = true; + } + #endif } -void common_hal_mcu_pin_reset_number(uint8_t pin_no) -{ +void common_hal_mcu_pin_reset_number(uint8_t pin_no) { reset_pin_number(pin_no / 16, pin_no % 16); -} +} \ No newline at end of file From 381889f6bc025617fe85b248fae0f6b05ed50c01 Mon Sep 17 00:00:00 2001 From: jgillick Date: Sun, 22 Nov 2020 01:19:28 -0800 Subject: [PATCH 4/9] Cleanup --- .../boards/thunderpack_v12/mpconfigboard.h | 8 +- .../thunderpack_v12/stm32f4xx_hal_conf.h | 440 ------------------ ports/stm/common-hal/microcontroller/Pin.c | 52 +-- 3 files changed, 28 insertions(+), 472 deletions(-) delete mode 100644 ports/stm/boards/thunderpack_v12/stm32f4xx_hal_conf.h diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.h b/ports/stm/boards/thunderpack_v12/mpconfigboard.h index 4c71b8aeb2..426e0678da 100644 --- a/ports/stm/boards/thunderpack_v12/mpconfigboard.h +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.h @@ -30,10 +30,7 @@ #define CIRCUITPY_INTERNAL_NVM_SIZE (0x4000) #define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x08010000) #define CIRCUITPY_INTERNAL_NVM_SECTOR FLASH_SECTOR_4 - -// Putting the entire flash sector in the NVM byte array buffer -// would take up too much RAM. This limits how much of the sector we use. -#define NVM_BYTEARRAY_BUFFER_SIZE 512 +#define NVM_BYTEARRAY_BUFFER_SIZE 512 // Flash config #define FLASH_SIZE (0x80000) @@ -47,7 +44,6 @@ #define SPI_FLASH_CS_PIN (&pin_PB12) // Status LEDs -#define MICROPY_HW_LED_STATUS (&pin_PA02) #define MICROPY_HW_APA102_MOSI (&pin_PB08) #define MICROPY_HW_APA102_SCK (&pin_PB00) @@ -58,4 +54,4 @@ // General config #define BOARD_OSC_DIV (24) #define BOARD_OVERWRITE_SWD (1) -#define BOARD_NO_VBUS_SENSE (1) \ No newline at end of file +#define BOARD_NO_VBUS_SENSE (1) diff --git a/ports/stm/boards/thunderpack_v12/stm32f4xx_hal_conf.h b/ports/stm/boards/thunderpack_v12/stm32f4xx_hal_conf.h deleted file mode 100644 index 5cb5634223..0000000000 --- a/ports/stm/boards/thunderpack_v12/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,440 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32f4xx_hal_conf.h. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - -#define HAL_ADC_MODULE_ENABLED -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -#define HAL_DAC_MODULE_ENABLED -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_I2C_MODULE_ENABLED -#define HAL_I2S_MODULE_ENABLED -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -#define HAL_TIM_MODULE_ENABLED -#define HAL_UART_MODULE_ENABLED -#define HAL_USART_MODULE_ENABLED -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_EXTI_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)24000000) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)40000) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) - -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm/common-hal/microcontroller/Pin.c b/ports/stm/common-hal/microcontroller/Pin.c index 4b68d205bf..7d259e0521 100644 --- a/ports/stm/common-hal/microcontroller/Pin.c +++ b/ports/stm/common-hal/microcontroller/Pin.c @@ -71,8 +71,8 @@ void reset_all_pins(void) { neopixel_in_use = false; #endif #ifdef MICROPY_HW_APA102_MOSI - apa102_sck_in_use = false; - apa102_mosi_in_use = false; + apa102_sck_in_use = false; + apa102_mosi_in_use = false; #endif } @@ -98,13 +98,13 @@ void reset_pin_number(uint8_t pin_port, uint8_t pin_number) { } #endif #ifdef MICROPY_HW_APA102_MOSI - if ((pin_port == MICROPY_HW_APA102_MOSI->port && pin_number == MICROPY_HW_APA102_MOSI->number) || (pin_port == MICROPY_HW_APA102_SCK->port && pin_number == MICROPY_HW_APA102_MOSI->number)) - { - apa102_mosi_in_use = false; - apa102_sck_in_use = false; - rgb_led_status_init(); - return; - } + if ((pin_port == MICROPY_HW_APA102_MOSI->port && pin_number == MICROPY_HW_APA102_MOSI->number) || (pin_port == MICROPY_HW_APA102_SCK->port && pin_number == MICROPY_HW_APA102_MOSI->number)) + { + apa102_mosi_in_use = false; + apa102_sck_in_use = false; + rgb_led_status_init(); + return; + } #endif } @@ -141,14 +141,14 @@ bool common_hal_mcu_pin_is_free(const mcu_pin_obj_t *pin) { } #endif #ifdef MICROPY_HW_APA102_MOSI - if (pin == MICROPY_HW_APA102_MOSI) - { - return !apa102_mosi_in_use; - } - if (pin == MICROPY_HW_APA102_SCK) - { - return !apa102_sck_in_use; - } + if (pin == MICROPY_HW_APA102_MOSI) + { + return !apa102_mosi_in_use; + } + if (pin == MICROPY_HW_APA102_SCK) + { + return !apa102_sck_in_use; + } #endif return pin_number_is_free(pin->port, pin->number); @@ -174,17 +174,17 @@ void common_hal_mcu_pin_claim(const mcu_pin_obj_t* pin) { } #endif #ifdef MICROPY_HW_APA102_MOSI - if (pin == MICROPY_HW_APA102_MOSI) - { - apa102_mosi_in_use = true; - } - if (pin == MICROPY_HW_APA102_SCK) - { - apa102_sck_in_use = true; - } + if (pin == MICROPY_HW_APA102_MOSI) + { + apa102_mosi_in_use = true; + } + if (pin == MICROPY_HW_APA102_SCK) + { + apa102_sck_in_use = true; + } #endif } void common_hal_mcu_pin_reset_number(uint8_t pin_no) { reset_pin_number(pin_no / 16, pin_no % 16); -} \ No newline at end of file +} From 56634eb00e524a6f51a44f4041cd73a04528fe47 Mon Sep 17 00:00:00 2001 From: jgillick Date: Sun, 22 Nov 2020 01:31:41 -0800 Subject: [PATCH 5/9] Rename thunderpack to v11 --- .github/workflows/build.yml | 3 ++- ports/stm/boards/{thunderpack => thunderpack_v11}/board.c | 0 .../boards/{thunderpack => thunderpack_v11}/mpconfigboard.h | 0 .../boards/{thunderpack => thunderpack_v11}/mpconfigboard.mk | 0 ports/stm/boards/{thunderpack => thunderpack_v11}/pins.c | 0 5 files changed, 2 insertions(+), 1 deletion(-) rename ports/stm/boards/{thunderpack => thunderpack_v11}/board.c (100%) rename ports/stm/boards/{thunderpack => thunderpack_v11}/mpconfigboard.h (100%) rename ports/stm/boards/{thunderpack => thunderpack_v11}/mpconfigboard.mk (100%) rename ports/stm/boards/{thunderpack => thunderpack_v11}/pins.c (100%) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index f3e728a05c..c5762c4aba 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -317,7 +317,8 @@ jobs: - "teensy40" - "teensy41" - "teknikio_bluebird" - - "thunderpack" + - "thunderpack_v11" + - "thunderpack_v12" - "tinkeringtech_scoutmakes_azul" - "trellis_m4_express" - "trinket_m0" diff --git a/ports/stm/boards/thunderpack/board.c b/ports/stm/boards/thunderpack_v11/board.c similarity index 100% rename from ports/stm/boards/thunderpack/board.c rename to ports/stm/boards/thunderpack_v11/board.c diff --git a/ports/stm/boards/thunderpack/mpconfigboard.h b/ports/stm/boards/thunderpack_v11/mpconfigboard.h similarity index 100% rename from ports/stm/boards/thunderpack/mpconfigboard.h rename to ports/stm/boards/thunderpack_v11/mpconfigboard.h diff --git a/ports/stm/boards/thunderpack/mpconfigboard.mk b/ports/stm/boards/thunderpack_v11/mpconfigboard.mk similarity index 100% rename from ports/stm/boards/thunderpack/mpconfigboard.mk rename to ports/stm/boards/thunderpack_v11/mpconfigboard.mk diff --git a/ports/stm/boards/thunderpack/pins.c b/ports/stm/boards/thunderpack_v11/pins.c similarity index 100% rename from ports/stm/boards/thunderpack/pins.c rename to ports/stm/boards/thunderpack_v11/pins.c From fe6e50b770f7dffda1d49c503362c59e674224c2 Mon Sep 17 00:00:00 2001 From: jgillick Date: Sun, 22 Nov 2020 01:49:23 -0800 Subject: [PATCH 6/9] Update USB_PID --- ports/stm/boards/thunderpack_v12/mpconfigboard.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk index d11cfb7505..7bfe273673 100644 --- a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x239A -USB_PID = 0x806A +USB_PID = 0x8071 USB_PRODUCT = "Thunderpack STM32F411" USB_MANUFACTURER = "Jeremy Gillick" USB_DEVICES = "CDC,MSC" From 661c20dd180343a3a5c7a52e63875888218422ba Mon Sep 17 00:00:00 2001 From: jgillick Date: Sun, 22 Nov 2020 18:25:37 -0800 Subject: [PATCH 7/9] Create a new linker script with more space for the firmware. --- ports/stm/boards/STM32F411_nvm_flash.ld | 29 +++++++++++++++++++ .../boards/thunderpack_v12/mpconfigboard.h | 12 ++++---- .../boards/thunderpack_v12/mpconfigboard.mk | 2 +- ports/stm/supervisor/internal_flash.h | 4 +++ 4 files changed, 41 insertions(+), 6 deletions(-) create mode 100644 ports/stm/boards/STM32F411_nvm_flash.ld diff --git a/ports/stm/boards/STM32F411_nvm_flash.ld b/ports/stm/boards/STM32F411_nvm_flash.ld new file mode 100644 index 0000000000..ced739765d --- /dev/null +++ b/ports/stm/boards/STM32F411_nvm_flash.ld @@ -0,0 +1,29 @@ +/* + GNU linker script for STM32F411 with nvm and an external flash chip, and reserves + more space for the CircuitPython firmware and less for the filesystem + (since the filesystem will be on the external flash chip). +*/ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K /* entire flash */ + FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sector 0 */ + FLASH_FS (rx) : ORIGIN = 0x08004000, LENGTH = 32K /* sectors 1,2 are 16K */ + FLASH_NVM (rwx) : ORIGIN = 0x0800C000, LENGTH = 16K /* sector 3 is 16K */ + FLASH_FIRMWARE (rx) : ORIGIN = 0x08010000, LENGTH = 448K /* sector 4 is 64K, sectors 5,6,7 are 128K */ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +} + +/* produce a link error if there is not this amount of RAM for these sections */ +_minimum_stack_size = 24K; +_minimum_heap_size = 16K; + +/* Define the top end of the stack. The stack is full descending so begins just + above last byte of RAM. Note that EABI requires the stack to be 8-byte + aligned for a call. */ +_estack = ORIGIN(RAM) + LENGTH(RAM); + +/* RAM extents for the garbage collector */ +_ram_start = ORIGIN(RAM); +_ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.h b/ports/stm/boards/thunderpack_v12/mpconfigboard.h index 426e0678da..773ca297e5 100644 --- a/ports/stm/boards/thunderpack_v12/mpconfigboard.h +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.h @@ -28,14 +28,16 @@ // Non-volatile memory config #define CIRCUITPY_INTERNAL_NVM_SIZE (0x4000) -#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x08010000) -#define CIRCUITPY_INTERNAL_NVM_SECTOR FLASH_SECTOR_4 +#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x0800C000) +#define CIRCUITPY_INTERNAL_NVM_SECTOR FLASH_SECTOR_3 #define NVM_BYTEARRAY_BUFFER_SIZE 512 // Flash config -#define FLASH_SIZE (0x80000) -#define FLASH_PAGE_SIZE (0x4000) -#define BOARD_FLASH_SIZE (FLASH_SIZE - CIRCUITPY_INTERNAL_NVM_SIZE- 0x2000 - 0xC000) +#define FLASH_SIZE (0x80000) +#define FLASH_PAGE_SIZE (0x4000) +#define BOARD_FLASH_SIZE (FLASH_SIZE - CIRCUITPY_INTERNAL_NVM_SIZE- 0x2000 - 0xC000) +#define INTERNAL_FLASH_FILESYSTEM_SIZE 0x8000 +#define INTERNAL_FLASH_FILESYSTEM_START_ADDR 0x08004000 // On-board flash #define SPI_FLASH_MOSI_PIN (&pin_PB15) diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk index 7bfe273673..744565e69b 100644 --- a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk @@ -17,4 +17,4 @@ MCU_VARIANT = STM32F411xE MCU_PACKAGE = UFQFPN48 LD_COMMON = boards/common_nvm.ld -LD_FILE = boards/STM32F411_nvm.ld +LD_FILE = boards/STM32F411_nvm_flash.ld diff --git a/ports/stm/supervisor/internal_flash.h b/ports/stm/supervisor/internal_flash.h index ad5cba62d8..5746deac84 100644 --- a/ports/stm/supervisor/internal_flash.h +++ b/ports/stm/supervisor/internal_flash.h @@ -41,9 +41,13 @@ #ifdef STM32F411xE #define STM32_FLASH_SIZE 0x80000 //512KiB +#ifndef INTERNAL_FLASH_FILESYSTEM_SIZE #define INTERNAL_FLASH_FILESYSTEM_SIZE 0xC000 //48KiB +#endif +#ifndef INTERNAL_FLASH_FILESYSTEM_START_ADDR #define INTERNAL_FLASH_FILESYSTEM_START_ADDR 0x08004000 #endif +#endif #ifdef STM32F412Zx #define STM32_FLASH_SIZE 0x100000 //1MB From 4c5e7520f5950f831ea18866f49645c507d0f811 Mon Sep 17 00:00:00 2001 From: jgillick Date: Mon, 23 Nov 2020 00:25:41 -0800 Subject: [PATCH 8/9] Fix NVM by clearing FLASH_FLAG_PGPERR --- .../boards/thunderpack_v11/mpconfigboard.h | 2 +- .../boards/thunderpack_v12/mpconfigboard.h | 26 +++++++++---------- .../boards/thunderpack_v12/mpconfigboard.mk | 1 + ports/stm/common-hal/microcontroller/Pin.c | 15 ++++++----- ports/stm/common-hal/nvm/ByteArray.c | 2 +- ports/stm/supervisor/internal_flash.h | 4 +-- 6 files changed, 26 insertions(+), 24 deletions(-) diff --git a/ports/stm/boards/thunderpack_v11/mpconfigboard.h b/ports/stm/boards/thunderpack_v11/mpconfigboard.h index c2649e2555..7d4a8dff32 100644 --- a/ports/stm/boards/thunderpack_v11/mpconfigboard.h +++ b/ports/stm/boards/thunderpack_v11/mpconfigboard.h @@ -23,7 +23,7 @@ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ -#define MICROPY_HW_BOARD_NAME "THUNDERPACK" +#define MICROPY_HW_BOARD_NAME "THUNDERPACK_v11" #define MICROPY_HW_MCU_NAME "STM32F411CE" // Non-volatile memory config diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.h b/ports/stm/boards/thunderpack_v12/mpconfigboard.h index 773ca297e5..57486da280 100644 --- a/ports/stm/boards/thunderpack_v12/mpconfigboard.h +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.h @@ -27,17 +27,16 @@ #define MICROPY_HW_MCU_NAME "STM32F411CE" // Non-volatile memory config -#define CIRCUITPY_INTERNAL_NVM_SIZE (0x4000) -#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x0800C000) -#define CIRCUITPY_INTERNAL_NVM_SECTOR FLASH_SECTOR_3 -#define NVM_BYTEARRAY_BUFFER_SIZE 512 +#define CIRCUITPY_INTERNAL_NVM_SIZE (0x4000) +#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x0800C000) +#define CIRCUITPY_INTERNAL_NVM_SECTOR FLASH_SECTOR_3 +#define NVM_BYTEARRAY_BUFFER_SIZE 512 // Flash config -#define FLASH_SIZE (0x80000) -#define FLASH_PAGE_SIZE (0x4000) -#define BOARD_FLASH_SIZE (FLASH_SIZE - CIRCUITPY_INTERNAL_NVM_SIZE- 0x2000 - 0xC000) +#define FLASH_SIZE (0x80000) +#define FLASH_PAGE_SIZE (0x4000) +#define BOARD_FLASH_SIZE (FLASH_SIZE - CIRCUITPY_INTERNAL_NVM_SIZE- 0x2000 - 0xC000) #define INTERNAL_FLASH_FILESYSTEM_SIZE 0x8000 -#define INTERNAL_FLASH_FILESYSTEM_START_ADDR 0x08004000 // On-board flash #define SPI_FLASH_MOSI_PIN (&pin_PB15) @@ -45,15 +44,14 @@ #define SPI_FLASH_SCK_PIN (&pin_PB13) #define SPI_FLASH_CS_PIN (&pin_PB12) +#define HSE_VALUE ((uint32_t)24000000U) +#define BOARD_OVERWRITE_SWD (1) +#define BOARD_NO_VBUS_SENSE (1) +#define BOARD_HAS_LOW_SPEED_CRYSTAL (0) + // Status LEDs #define MICROPY_HW_APA102_MOSI (&pin_PB08) #define MICROPY_HW_APA102_SCK (&pin_PB00) - // I2C #define DEFAULT_I2C_BUS_SCL (&pin_PB06) #define DEFAULT_I2C_BUS_SDA (&pin_PB07) - -// General config -#define BOARD_OSC_DIV (24) -#define BOARD_OVERWRITE_SWD (1) -#define BOARD_NO_VBUS_SENSE (1) diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk index 744565e69b..d0bc22680f 100644 --- a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk @@ -11,6 +11,7 @@ EXTERNAL_FLASH_DEVICE_COUNT = 1 EXTERNAL_FLASH_DEVICES = GD25Q16C CIRCUITPY_NVM = 1 +CIRCUITPY_BLEIO_HCI = 0 MCU_SERIES = F4 MCU_VARIANT = STM32F411xE diff --git a/ports/stm/common-hal/microcontroller/Pin.c b/ports/stm/common-hal/microcontroller/Pin.c index 7d259e0521..0e333c71cf 100644 --- a/ports/stm/common-hal/microcontroller/Pin.c +++ b/ports/stm/common-hal/microcontroller/Pin.c @@ -35,7 +35,7 @@ #ifdef MICROPY_HW_NEOPIXEL bool neopixel_in_use; #endif -#ifdef MICROPY_HW_APA102_MOSI +#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK) bool apa102_sck_in_use; bool apa102_mosi_in_use; #endif @@ -70,7 +70,7 @@ void reset_all_pins(void) { #ifdef MICROPY_HW_NEOPIXEL neopixel_in_use = false; #endif - #ifdef MICROPY_HW_APA102_MOSI + #if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK) apa102_sck_in_use = false; apa102_mosi_in_use = false; #endif @@ -97,8 +97,11 @@ void reset_pin_number(uint8_t pin_port, uint8_t pin_number) { return; } #endif - #ifdef MICROPY_HW_APA102_MOSI - if ((pin_port == MICROPY_HW_APA102_MOSI->port && pin_number == MICROPY_HW_APA102_MOSI->number) || (pin_port == MICROPY_HW_APA102_SCK->port && pin_number == MICROPY_HW_APA102_MOSI->number)) + #if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK) + if ( + (pin_port == MICROPY_HW_APA102_MOSI->port && pin_number == MICROPY_HW_APA102_MOSI->number) + || (pin_port == MICROPY_HW_APA102_SCK->port && pin_number == MICROPY_HW_APA102_MOSI->number) + ) { apa102_mosi_in_use = false; apa102_sck_in_use = false; @@ -140,7 +143,7 @@ bool common_hal_mcu_pin_is_free(const mcu_pin_obj_t *pin) { return !neopixel_in_use; } #endif - #ifdef MICROPY_HW_APA102_MOSI + #if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK) if (pin == MICROPY_HW_APA102_MOSI) { return !apa102_mosi_in_use; @@ -173,7 +176,7 @@ void common_hal_mcu_pin_claim(const mcu_pin_obj_t* pin) { neopixel_in_use = true; } #endif - #ifdef MICROPY_HW_APA102_MOSI + #if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK) if (pin == MICROPY_HW_APA102_MOSI) { apa102_mosi_in_use = true; diff --git a/ports/stm/common-hal/nvm/ByteArray.c b/ports/stm/common-hal/nvm/ByteArray.c index 462d3aa9de..b7a1ff0351 100644 --- a/ports/stm/common-hal/nvm/ByteArray.c +++ b/ports/stm/common-hal/nvm/ByteArray.c @@ -48,7 +48,7 @@ bool common_hal_nvm_bytearray_set_bytes(nvm_bytearray_obj_t *self, // Erase flash sector HAL_FLASH_Unlock(); - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGSERR ); + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR ); FLASH_Erase_Sector(CIRCUITPY_INTERNAL_NVM_SECTOR, VOLTAGE_RANGE_3); // Write bytes to flash diff --git a/ports/stm/supervisor/internal_flash.h b/ports/stm/supervisor/internal_flash.h index 5746deac84..19ae03e0b3 100644 --- a/ports/stm/supervisor/internal_flash.h +++ b/ports/stm/supervisor/internal_flash.h @@ -42,10 +42,10 @@ #ifdef STM32F411xE #define STM32_FLASH_SIZE 0x80000 //512KiB #ifndef INTERNAL_FLASH_FILESYSTEM_SIZE -#define INTERNAL_FLASH_FILESYSTEM_SIZE 0xC000 //48KiB + #define INTERNAL_FLASH_FILESYSTEM_SIZE 0xC000 //48KiB #endif #ifndef INTERNAL_FLASH_FILESYSTEM_START_ADDR -#define INTERNAL_FLASH_FILESYSTEM_START_ADDR 0x08004000 + #define INTERNAL_FLASH_FILESYSTEM_START_ADDR 0x08004000 #endif #endif From f8499a468e79999decdf5002016bbfe99994f47b Mon Sep 17 00:00:00 2001 From: jgillick Date: Mon, 23 Nov 2020 22:56:38 -0800 Subject: [PATCH 9/9] Remove filesystem from linker script. --- .../{STM32F411_nvm_flash.ld => STM32F411_nvm_nofs.ld} | 10 ++++------ ports/stm/boards/thunderpack_v12/mpconfigboard.h | 4 ++-- ports/stm/boards/thunderpack_v12/mpconfigboard.mk | 2 +- 3 files changed, 7 insertions(+), 9 deletions(-) rename ports/stm/boards/{STM32F411_nvm_flash.ld => STM32F411_nvm_nofs.ld} (64%) diff --git a/ports/stm/boards/STM32F411_nvm_flash.ld b/ports/stm/boards/STM32F411_nvm_nofs.ld similarity index 64% rename from ports/stm/boards/STM32F411_nvm_flash.ld rename to ports/stm/boards/STM32F411_nvm_nofs.ld index ced739765d..e4630518cd 100644 --- a/ports/stm/boards/STM32F411_nvm_flash.ld +++ b/ports/stm/boards/STM32F411_nvm_nofs.ld @@ -1,7 +1,6 @@ /* - GNU linker script for STM32F411 with nvm and an external flash chip, and reserves - more space for the CircuitPython firmware and less for the filesystem - (since the filesystem will be on the external flash chip). + GNU linker script for STM32F411 with nvm and an external flash chip. + No space is reserved for a filesystem. */ /* Specify the memory areas */ @@ -9,9 +8,8 @@ MEMORY { FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K /* entire flash */ FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sector 0 */ - FLASH_FS (rx) : ORIGIN = 0x08004000, LENGTH = 32K /* sectors 1,2 are 16K */ - FLASH_NVM (rwx) : ORIGIN = 0x0800C000, LENGTH = 16K /* sector 3 is 16K */ - FLASH_FIRMWARE (rx) : ORIGIN = 0x08010000, LENGTH = 448K /* sector 4 is 64K, sectors 5,6,7 are 128K */ + FLASH_NVM (rwx) : ORIGIN = 0x08004000, LENGTH = 16K /* sector 1 is 16K */ + FLASH_FIRMWARE (rx) : ORIGIN = 0x08008000, LENGTH = 480K /* sector 2,3 is 16k, sector 4 is 64K, sectors 5,6,7 are 128K */ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K } diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.h b/ports/stm/boards/thunderpack_v12/mpconfigboard.h index 57486da280..fb5f389a37 100644 --- a/ports/stm/boards/thunderpack_v12/mpconfigboard.h +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.h @@ -28,8 +28,8 @@ // Non-volatile memory config #define CIRCUITPY_INTERNAL_NVM_SIZE (0x4000) -#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x0800C000) -#define CIRCUITPY_INTERNAL_NVM_SECTOR FLASH_SECTOR_3 +#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x08004000) +#define CIRCUITPY_INTERNAL_NVM_SECTOR FLASH_SECTOR_1 #define NVM_BYTEARRAY_BUFFER_SIZE 512 // Flash config diff --git a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk index d0bc22680f..a2e1da1011 100644 --- a/ports/stm/boards/thunderpack_v12/mpconfigboard.mk +++ b/ports/stm/boards/thunderpack_v12/mpconfigboard.mk @@ -18,4 +18,4 @@ MCU_VARIANT = STM32F411xE MCU_PACKAGE = UFQFPN48 LD_COMMON = boards/common_nvm.ld -LD_FILE = boards/STM32F411_nvm_flash.ld +LD_FILE = boards/STM32F411_nvm_nofs.ld