nrf/Makefile: Add support for flashing with nrfutil.

An additional Makefile parameter NRFUTIL_PORT can be set in order
to define the serial port to used for the DFU (Default: /dev/ttyACM0).

The "nrfutil" that is used as flasher towards OpenBootloader is
available for installation through Python "pip".

In case of SD=s140, SoftDevice ID 0xB6 is passed to nrfutil's package
generation which corresponds to SoftDevice s140 v6.1.1.
This commit is contained in:
Glenn Ruben Bakke 2020-07-16 23:17:28 +02:00
parent 718397a37d
commit 634f6df324
1 changed files with 25 additions and 0 deletions

View File

@ -446,6 +446,31 @@ deploy: $(BUILD)/$(OUTPUT_FILENAME).hex
sd: $(BUILD)/$(OUTPUT_FILENAME).hex sd: $(BUILD)/$(OUTPUT_FILENAME).hex
$(Q)$(OPENOCD) -f interface/cmsis-dap.cfg -f $(OPENOCD_TARGET) -c "init" -c "program $(SOFTDEV_HEX) verify reset" -c "exit" $(Q)$(OPENOCD) -f interface/cmsis-dap.cfg -f $(OPENOCD_TARGET) -c "init" -c "program $(SOFTDEV_HEX) verify reset" -c "exit"
else ifeq ($(FLASHER), nrfutil)
NRFUTIL_PORT ?= /dev/ttyACM0
NRFUTIL_SD_REQ ?= 0x00
ifeq ($(SD), s140)
NRFUTIL_SD_REQ = 0xB6
endif
.PHONY: nrfutil_dfu_sd nrfutil_dfu_deploy
.NOTPARALLEL: nrfutil_dfu_sd nrfutil_dfu_deploy
# DFU both SD and app in case of target "sd"
sd: nrfutil_dfu_sd nrfutil_dfu_deploy
nrfutil_dfu_sd: $(BUILD)/$(OUTPUT_FILENAME).hex
$(Q)hexmerge.py -o $(BUILD)/stripped_sd.hex --range=0x1000: $(SOFTDEV_HEX)
$(Q)nrfutil pkg generate --hw-version 52 --sd-req 0x00 --sd-id 0x00 --softdevice $(BUILD)/stripped_sd.hex $(BUILD)/stripped_sd.zip
$(Q)nrfutil dfu usb-serial -pkg $(BUILD)/stripped_sd.zip -p $(NRFUTIL_PORT) -t 0
nrfutil_dfu_deploy: $(BUILD)/$(OUTPUT_FILENAME).hex
$(Q)nrfutil pkg generate --hw-version 52 --sd-req $(NRFUTIL_SD_REQ) --application-version 1 --application $(BUILD)/$(OUTPUT_FILENAME).hex $(BUILD)/$(OUTPUT_FILENAME)_dfu.zip
$(Q)nrfutil dfu usb-serial -pkg $(BUILD)/$(OUTPUT_FILENAME)_dfu.zip -p $(NRFUTIL_PORT) -t 0
deploy: nrfutil_dfu_deploy
endif endif
flash: deploy flash: deploy