djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

stm32/mpbthciport: Increase char timeout of BT HCI UART.

Browse Source 
The 2ms used previously was not long enough and it could lose HCI sync.

Also print error on tx failure to make this more obvious in the future.
This commit is contained in:
Andrew Leech 2020-08-16 08:30:19 +10:00 committed by Damien George
parent 8b00aeab8f
commit 6077c63a45
1 changed files with 8 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
ports/stm32/mpbthciport.c
View File

@ -142,8 +142,9 @@ int mp_bluetooth_hci_uart_init(uint32_t port, uint32_t baudrate) {
mp_bluetooth_hci_uart_obj.base.type = &pyb_uart_type;
mp_bluetooth_hci_uart_obj.uart_id = port;
mp_bluetooth_hci_uart_obj.is_static = true;
mp_bluetooth_hci_uart_obj.timeout = 2;
mp_bluetooth_hci_uart_obj.timeout_char = 2;
// We don't want to block indefinitely, but expect flow control is doing its job.
mp_bluetooth_hci_uart_obj.timeout = 200;
mp_bluetooth_hci_uart_obj.timeout_char = 200;
MP_STATE_PORT(pyb_uart_obj_all)[mp_bluetooth_hci_uart_obj.uart_id - 1] = &mp_bluetooth_hci_uart_obj;
// This also initialises the UART.
@ -184,7 +185,11 @@ int mp_bluetooth_hci_uart_write(const uint8_t *buf, size_t len) {
// DEBUG_printf("mp_bluetooth_hci_uart_write (stm32)\n");
mp_bluetooth_hci_controller_wakeup();
uart_tx_strn(&mp_bluetooth_hci_uart_obj, (void *)buf, len);
int errcode;
uart_tx_data(&mp_bluetooth_hci_uart_obj, (void *)buf, len, &errcode);
if (errcode != 0) {
printf("\nmp_bluetooth_hci_uart_write: failed to write to UART %d\n", errcode);
}
return 0;
}