Merge branch 'master' into nrf52_uart_io

locale/circuitpython.pot

@@ -2007,19 +2007,19 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:168
+#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:175
 msgid "Invalid polarity"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:172
+#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:179
 msgid "Invalid phase"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:176
+#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:183
 msgid "Invalid number of bits"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:341
+#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:348
 msgid "buffer slices must be of equal length"
 msgstr ""
 

locale/de_DE.po

@@ -2020,19 +2020,19 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:168
+#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:175
 msgid "Invalid polarity"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:172
+#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:179
 msgid "Invalid phase"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:176
+#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:183
 msgid "Invalid number of bits"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:341
+#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:348
 msgid "buffer slices must be of equal length"
 msgstr ""
 

locale/en_US.po

@@ -2007,19 +2007,19 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:168
+#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:175
 msgid "Invalid polarity"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:172
+#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:179
 msgid "Invalid phase"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:176
+#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:183
 msgid "Invalid number of bits"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:341
+#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:348
 msgid "buffer slices must be of equal length"
 msgstr ""
 

locale/es.po

@@ -2053,19 +2053,19 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:168
+#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:175
 msgid "Invalid polarity"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:172
+#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:179
 msgid "Invalid phase"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:176
+#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:183
 msgid "Invalid number of bits"
 msgstr ""
 
-#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:341
+#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:348
 msgid "buffer slices must be of equal length"
 msgstr ""
 

locale/fil.po

@@ -745,7 +745,7 @@ msgstr "hindi sinusuportahan ang bytes > 8 bits"
 #: ports/nrf/common-hal/busio/UART.c:364
 #, fuzzy
 msgid "busio.UART not available"
-msgstr "hindi pa implemented ang busio.UART"
+msgstr ""
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
 #, c-format
@@ -2050,19 +2050,19 @@ msgstr "Function nangangailangan ng lock"
 msgid "Buffer must be at least length 1"
 msgstr "Buffer dapat ay hindi baba sa 1 na haba"
 
-#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:168
+#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:175
 msgid "Invalid polarity"
 msgstr "Mali ang polarity"
 
-#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:172
+#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:179
 msgid "Invalid phase"
 msgstr "Mali ang phase"
 
-#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:176
+#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:183
 msgid "Invalid number of bits"
 msgstr "Mali ang bilang ng bits"
 
-#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:341
+#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:348
 msgid "buffer slices must be of equal length"
 msgstr "aarehas na haba dapat ang buffer slices"
 

locale/fr.po

@@ -741,7 +741,7 @@ msgstr "octets > 8 bits non supporté"
 #: ports/nrf/common-hal/busio/UART.c:364
 #, fuzzy
 msgid "busio.UART not available"
-msgstr "busio.UART pas encore implémenté"
+msgstr "busio.UART n'est pas disponible"
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
 #, c-format
@@ -2041,19 +2041,19 @@ msgstr "La fonction nécessite un verrou"
 msgid "Buffer must be at least length 1"
 msgstr "Le tampon doit être de longueur au moins 1"
 
-#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:168
+#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:175
 msgid "Invalid polarity"
 msgstr "Polarité invalide"
 
-#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:172
+#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:179
 msgid "Invalid phase"
 msgstr "Phase invalide"
 
-#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:176
+#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:183
 msgid "Invalid number of bits"
 msgstr "Nombre de bits invalide"
 
-#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:341
+#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:348
 msgid "buffer slices must be of equal length"
 msgstr "les slices de tampon doivent être de longueurs égales"
 

ports/nrf/common-hal/busio/SPI.c

@@ -65,40 +65,40 @@ void spi_reset(void) {
     }
 }
 
-// Convert frequency to clock-speed-dependent value
+// Convert frequency to clock-speed-dependent value. Choose the next lower baudrate if in between
+// available baudrates.
 static nrf_spim_frequency_t baudrate_to_spim_frequency(const uint32_t baudrate) {
-    if (baudrate <= 125000) {
-      return NRF_SPIM_FREQ_125K;
-    }
-    if (baudrate <= 250000) {
-        return NRF_SPIM_FREQ_250K;
-    }
-    if (baudrate <= 500000) {
-        return NRF_SPIM_FREQ_500K;
-    }
-    if (baudrate <= 1000000) {
-        return NRF_SPIM_FREQ_1M;
-    }
-    if (baudrate <= 2000000) {
-        return NRF_SPIM_FREQ_2M;
-    }
-    if (baudrate <= 4000000) {
-        return NRF_SPIM_FREQ_4M;
-    }
-    if (baudrate <= 8000000) {
-        return NRF_SPIM_FREQ_8M;
-    }
-#ifdef SPIM_FREQUENCY_FREQUENCY_M16
-    if (baudrate <= 16000000) {
-        return NRF_SPIM_FREQ_16M;
-    }
-#endif
 
+    static const struct {
+        const uint32_t boundary;
+        nrf_spim_frequency_t spim_frequency;
+    } baudrate_map[] = {
 #ifdef SPIM_FREQUENCY_FREQUENCY_M32
-    return NRF_SPIM_FREQ_32M;
+        { 32000000, NRF_SPIM_FREQ_32M },
-#else
-    return NRF_SPIM_FREQ_8M;
 #endif
+#ifdef SPIM_FREQUENCY_FREQUENCY_M16
+        { 16000000, NRF_SPIM_FREQ_16M },
+#endif
+        {  8000000, NRF_SPIM_FREQ_8M },
+        {  4000000, NRF_SPIM_FREQ_4M },
+        {  2000000, NRF_SPIM_FREQ_2M },
+        {  1000000, NRF_SPIM_FREQ_1M },
+        {   500000, NRF_SPIM_FREQ_500K },
+        {   250000, NRF_SPIM_FREQ_250K },
+        {        0, NRF_SPIM_FREQ_125K },
+    };
+
+    size_t i = 0;
+    uint32_t boundary;
+    do {
+        boundary = baudrate_map[i].boundary;
+        if (baudrate >= boundary) {
+            return baudrate_map[i].spim_frequency;
+        }
+        i++;
+    } while (boundary != 0);
+    // Should not get here.
+    return 0;
 }
 
 void common_hal_busio_spi_construct(busio_spi_obj_t *self, const mcu_pin_obj_t * clock, const mcu_pin_obj_t * mosi, const mcu_pin_obj_t * miso) {
@@ -168,26 +168,26 @@ void common_hal_busio_spi_deinit(busio_spi_obj_t *self) {
 }
 
 bool common_hal_busio_spi_configure(busio_spi_obj_t *self, uint32_t baudrate, uint8_t polarity, uint8_t phase, uint8_t bits) {
-  // nrf52 does not support 16 bit
+    // nrf52 does not support 16 bit
-  if (bits != 8)
+    if (bits != 8) {
       return false;
+    }
 
-  if (baudrate > self->spim_peripheral->max_frequency_MHz * 1000000) {
+    // Set desired frequency, rounding down, and don't go above available frequency for this SPIM.
-      mp_raise_ValueError(translate("Baud rate too high for this SPI peripheral"));
+    nrf_spim_frequency_set(self->spim_peripheral->spim.p_reg,
-      return false;
+                           baudrate_to_spim_frequency(MIN(baudrate,
-  }
+                                                          self->spim_peripheral->max_frequency_MHz * 1000000)));
-  nrf_spim_frequency_set(self->spim_peripheral->spim.p_reg, baudrate_to_spim_frequency(baudrate));
 
-  nrf_spim_mode_t mode = NRF_SPIM_MODE_0;
+    nrf_spim_mode_t mode = NRF_SPIM_MODE_0;
-  if (polarity) {
+    if (polarity) {
-      mode = (phase) ? NRF_SPIM_MODE_3 : NRF_SPIM_MODE_2;
+        mode = (phase) ? NRF_SPIM_MODE_3 : NRF_SPIM_MODE_2;
-  } else {
+    } else {
-      mode = (phase) ? NRF_SPIM_MODE_1 : NRF_SPIM_MODE_0;
+        mode = (phase) ? NRF_SPIM_MODE_1 : NRF_SPIM_MODE_0;
-  }
+    }
 
-  nrf_spim_configure(self->spim_peripheral->spim.p_reg, mode, NRF_SPIM_BIT_ORDER_MSB_FIRST);
+    nrf_spim_configure(self->spim_peripheral->spim.p_reg, mode, NRF_SPIM_BIT_ORDER_MSB_FIRST);
 
-  return true;
+    return true;
 }
 
 bool common_hal_busio_spi_try_lock(busio_spi_obj_t *self) {

shared-bindings/busio/SPI.c

@@ -136,19 +136,26 @@ static void check_lock(busio_spi_obj_t *self) {
 
 //|   .. method:: SPI.configure(\*, baudrate=100000, polarity=0, phase=0, bits=8)
 //|
-//|     Configures the SPI bus. Only valid when locked.
+//|     Configures the SPI bus. The SPI object must be locked.
 //|
 //|     :param int baudrate: the desired clock rate in Hertz. The actual clock rate may be higher or lower
 //|       due to the granularity of available clock settings.
 //|       Check the `frequency` attribute for the actual clock rate.
-//|       **Note:** on the SAMD21, it is possible to set the baud rate to 24 MHz, but that
-//|       speed is not guaranteed to work. 12 MHz is the next available lower speed, and is
-//|       within spec for the SAMD21.
 //|     :param int polarity: the base state of the clock line (0 or 1)
 //|     :param int phase: the edge of the clock that data is captured. First (0)
 //|       or second (1). Rising or falling depends on clock polarity.
 //|     :param int bits: the number of bits per word
 //|
+//|   .. note:: On the SAMD21, it is possible to set the baudrate to 24 MHz, but that
+//|      speed is not guaranteed to work. 12 MHz is the next available lower speed, and is
+//|      within spec for the SAMD21.
+//|
+//|   .. note:: On the nRF52832, these baudrates are available: 125kHz, 250kHz, 1MHz, 2MHz, 4MHz,
+//|      and 8MHz. On the nRF52840, 16MHz and 32MHz are also available, but only on the first
+//|      `busio.SPI` object you create. Two more ``busio.SPI`` objects can be created, but they are restricted
+//|      to 8MHz maximum. This is a hardware restriction: there is only one high-speed SPI peripheral.
+//|      If you pick a a baudrate other than one of these, the nearest lower
+//|      baudrate will be chosen, with a minimum of 125kHz.
 STATIC mp_obj_t busio_spi_configure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
     enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_bits };
     static const mp_arg_t allowed_args[] = {