Merge branch 'adafruit:main' into adcdma

ports/atmel-samd/boards/hallowing_m0_express/board.c

@@ -104,8 +104,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PA00,
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/hallowing_m4_express/board.c

@@ -84,8 +84,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PB14,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/monster_m4sk/board.c

@@ -85,8 +85,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PA23,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/pewpew_lcd/board.c

@@ -84,7 +84,6 @@ void board_init(void) {
         NULL, // &pin_PA17, // brightness pin
         NO_BRIGHTNESS_COMMAND,
         0.0f, // brightness
-        false, // auto_brightness
         false, // single_byte_bounds
         true, // data as commands
         true, // auto_refresh

ports/atmel-samd/boards/pewpew_m4/board.c

@@ -137,8 +137,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         NULL,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         false, // auto_refresh

ports/atmel-samd/boards/pybadge/board.c

@@ -105,8 +105,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PA01,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/pygamer/board.c

@@ -107,8 +107,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PA01,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/pyportal/board.c

@@ -94,8 +94,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PB31, // Backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/pyportal_titano/board.c

@@ -111,8 +111,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PB31, // Backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/seeeduino_wio_terminal/board.c

@@ -102,8 +102,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PC05,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/ugame10/board.c

@@ -105,7 +105,6 @@ void board_init(void) {
         NULL,
         NO_BRIGHTNESS_COMMAND,
         1.0f, // brightness
-        false, // auto_brightness
         false, // single_byte_bounds
         false, // data as commands
         true, // auto_refresh

ports/espressif/bindings/esp32_camera/Camera.c

@@ -57,7 +57,7 @@
 //|         pixel_format: PixelFormat=PixelFormat.RGB565,
 //|         frame_size: FrameSize=FrameSize.QQVGA,
 //|         jpeg_quality: int=15,
-//|         double_buffered: bool = True,
+//|         framebuffer_count: int = 1,
 //|         grab_mode: GrabMode = GrabMode.WHEN_EMPTY,
 //|     ) -> None:
 //|         """

ports/espressif/boards/adafruit_esp32s2_camera/board.c

@@ -89,8 +89,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO38,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/adafruit_feather_esp32s2_tft/board.c

@@ -95,7 +95,7 @@ void board_init(void) {
     display->base.type = &displayio_display_type;
 
     // workaround as board_init() is called before reset_port() in main.c
-    pwmout_reset();
+///    pwmout_reset();
 
     common_hal_displayio_display_construct(
         display,
@@ -118,8 +118,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh
@@ -128,8 +127,6 @@ void board_init(void) {
         false,          // SH1107_addressing
         50000           // backlight pwm frequency
         );
-
-    common_hal_never_reset_pin(&pin_GPIO45); // backlight pin
 }
 
 bool board_requests_safe_mode(void) {

ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/board.c

@@ -94,8 +94,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO7,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/adafruit_feather_esp32s3_tft/board.c

@@ -118,8 +118,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/adafruit_funhouse/board.c

@@ -97,8 +97,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO21,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/espressif_esp32s3_box/board.c

@@ -80,8 +80,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/espressif_esp32s3_box_lite/board.c

@@ -81,8 +81,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/espressif_esp32s3_eye/board.c

@@ -111,8 +111,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO48,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/espressif_esp32s3_usb_otg_n8/board.c

@@ -108,8 +108,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO9,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/hardkernel_odroid_go/board.c

@@ -100,8 +100,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO14,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/hexky_s2/board.c

@@ -112,8 +112,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/hiibot_iots2/board.c

@@ -117,8 +117,7 @@ static void display_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO38,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/lilygo_ttgo_t8_s2_st7789/board.c

@@ -117,8 +117,7 @@ static void display_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO33,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/morpheans_morphesp-240/board.c

@@ -198,8 +198,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         NULL,           // There is no backlight pin, defined for now.
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        true,           // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/common-hal/i2ctarget/I2CTarget.c

@@ -54,7 +54,7 @@ void common_hal_i2ctarget_i2c_target_construct(i2ctarget_i2c_target_obj_t *self,
     self->i2c_num = peripherals_i2c_get_free_num();
 
     if (self->i2c_num == I2C_NUM_MAX) {
-        mp_raise_ValueError(translate("All I2C targets are in use"));
+        mp_raise_ValueError(translate("All I2C peripherals are in use"));
     }
 
     const i2c_config_t i2c_conf = {

ports/nrf/boards/clue_nrf52840_express/board.c

@@ -84,8 +84,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_P1_05,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/nrf/boards/hiibot_bluefi/board.c

@@ -85,8 +85,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_P1_13,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/nrf/boards/makerdiary_nrf52840_m2_devkit/board.c

@@ -85,8 +85,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_P0_20,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/nrf/boards/ohs2020_badge/board.c

@@ -84,8 +84,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_P0_02, // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/raspberrypi/boards/adafruit_macropad_rp2040/board.c

@@ -97,7 +97,6 @@ void board_init(void) {
         NULL,
         0x81,
         1.0f, // brightness
-        false, // auto_brightness
         true, // single_byte_bounds
         true, // data as commands
         true, // auto_refresh

ports/raspberrypi/boards/pimoroni_picosystem/board.c

@@ -101,8 +101,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO12,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/stm/boards/meowbit_v121/board.c

@@ -104,8 +104,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PB03,
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        false, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

py/formatfloat.c

@@ -25,6 +25,7 @@
  */
 
 #include "py/mpconfig.h"
+#include "py/misc.h"
 #if MICROPY_FLOAT_IMPL != MICROPY_FLOAT_IMPL_NONE
 
 #include <assert.h>
@@ -96,7 +97,16 @@ static inline int fp_isless1(float x) {
 #define fp_iszero(x) (x == 0)
 #define fp_isless1(x) (x < 1.0)
 
-#endif
+#endif // MICROPY_FLOAT_IMPL == MICROPY_FLOAT_IMPL_FLOAT/DOUBLE
+
+static inline int fp_ge_eps(FPTYPE x, FPTYPE y) {
+    mp_float_union_t fb_y = {y};
+    // Back off 2 eps.
+    // This is valid for almost all values, but in practice
+    // it's only used when y = 1eX for X>=0.
+    fb_y.i -= 2;
+    return x >= fb_y.f;
+}
 
 static const FPTYPE g_pos_pow[] = {
     #if FPDECEXP > 32
@@ -173,6 +183,7 @@ int mp_format_float(FPTYPE f, char *buf, size_t buf_size, char fmt, int prec, ch
     int num_digits = 0;
     const FPTYPE *pos_pow = g_pos_pow;
     const FPTYPE *neg_pow = g_neg_pow;
+    int signed_e = 0;
 
     if (fp_iszero(f)) {
         e = 0;
@@ -192,31 +203,24 @@ int mp_format_float(FPTYPE f, char *buf, size_t buf_size, char fmt, int prec, ch
             }
         }
     } else if (fp_isless1(f)) {
-        // We need to figure out what an integer digit will be used
+        FPTYPE f_mod = f;
-        // in case 'f' is used (or we revert other format to it below).
-        // As we just tested number to be <1, this is obviously 0,
-        // but we can round it up to 1 below.
-        char first_dig = '0';
-        if (f >= FPROUND_TO_ONE) {
-            first_dig = '1';
-        }
-
         // Build negative exponent
         for (e = 0, e1 = FPDECEXP; e1; e1 >>= 1, pos_pow++, neg_pow++) {
-            if (*neg_pow > f) {
+            if (*neg_pow > f_mod) {
                 e += e1;
-                f *= *pos_pow;
+                f_mod *= *pos_pow;
             }
         }
+
         char e_sign_char = '-';
-        if (fp_isless1(f) && f >= FPROUND_TO_ONE) {
+        if (fp_isless1(f_mod) && f_mod >= FPROUND_TO_ONE) {
-            f = FPCONST(1.0);
+            f_mod = FPCONST(1.0);
             if (e == 0) {
                 e_sign_char = '+';
             }
-        } else if (fp_isless1(f)) {
+        } else if (fp_isless1(f_mod)) {
             e++;
-            f *= FPCONST(10.0);
+            f_mod *= FPCONST(10.0);
         }
 
         // If the user specified 'g' format, and e is <= 4, then we'll switch
@@ -224,8 +228,7 @@ int mp_format_float(FPTYPE f, char *buf, size_t buf_size, char fmt, int prec, ch
 
         if (fmt == 'f' || (fmt == 'g' && e <= 4)) {
             fmt = 'f';
-            dec = -1;
+            dec = 0;
-            *s++ = first_dig;
 
             if (org_fmt == 'g') {
                 prec += (e - 1);
@@ -237,13 +240,8 @@ int mp_format_float(FPTYPE f, char *buf, size_t buf_size, char fmt, int prec, ch
             }
 
             num_digits = prec;
-            if (num_digits) {
+            signed_e = 0;
-                *s++ = '.';
+            ++num_digits;
-                while (--e && num_digits) {
-                    *s++ = '0';
-                    num_digits--;
-                }
-            }
         } else {
             // For e & g formats, we'll be printing the exponent, so set the
             // sign.
@@ -256,22 +254,29 @@ int mp_format_float(FPTYPE f, char *buf, size_t buf_size, char fmt, int prec, ch
                     prec++;
                 }
             }
+            signed_e = -e;
         }
     } else {
-        // Build positive exponent
+        // Build positive exponent.
-        for (e = 0, e1 = FPDECEXP; e1; e1 >>= 1, pos_pow++, neg_pow++) {
+        // We don't modify f at this point to avoid innaccuracies from
-            if (*pos_pow <= f) {
+        // scaling it.  Instead, we find the product of powers of 10
+        // that is not greater than it, and use that to start the
+        // mantissa.
+        FPTYPE u_base = FPCONST(1.0);
+        for (e = 0, e1 = FPDECEXP; e1; e1 >>= 1, pos_pow++) {
+            FPTYPE next_u = u_base * *pos_pow;
+            // fp_ge_eps performs "f >= (next_u - 2eps)" so that if, for
+            // numerical reasons, f is very close to a power of ten but
+            // not strictly equal, we still treat it as that power of 10.
+            // The comparison was failing for maybe 10% of 1eX values, but
+            // although rounding fixed many of them, there were still some
+            // rendering as 9.99999998e(X-1).
+            if (fp_ge_eps(f, next_u)) {
+                u_base = next_u;
                 e += e1;
-                f *= *neg_pow;
             }
         }
 
-        // It can be that f was right on the edge of an entry in pos_pow needs to be reduced
-        if ((int)f >= 10) {
-            e += 1;
-            f *= FPCONST(0.1);
-        }
-
         // If the user specified fixed format (fmt == 'f') and e makes the
         // number too big to fit into the available buffer, then we'll
         // switch to the 'e' format.
@@ -310,15 +315,15 @@ int mp_format_float(FPTYPE f, char *buf, size_t buf_size, char fmt, int prec, ch
         } else {
             e_sign = '+';
         }
+        signed_e = e;
     }
     if (prec < 0) {
         // This can happen when the prec is trimmed to prevent buffer overflow
         prec = 0;
     }
 
-    // We now have num.f as a floating point number between >= 1 and < 10
+    // At this point e contains the absolute value of the power of 10 exponent.
-    // (or equal to zero), and e contains the absolute value of the power of
+    // (dec + 1) == the number of dgits before the decimal.
-    // 10 exponent. and (dec + 1) == the number of dgits before the decimal.
 
     // For e, prec is # digits after the decimal
     // For f, prec is # digits after the decimal
@@ -336,25 +341,63 @@ int mp_format_float(FPTYPE f, char *buf, size_t buf_size, char fmt, int prec, ch
         num_digits = prec;
     }
 
-    // Print the digits of the mantissa
+    if (signed_e < 0) {
-    for (int i = 0; i < num_digits; ++i, --dec) {
+        // The algorithm below treats numbers smaller than 1 by scaling them
-        int32_t d = (int32_t)f;
+        // repeatedly by 10 to bring the new digit to the top.  Our input number
-        if (d < 0) {
+        // was smaller than 1, so scale it up to be 1 <= f < 10.
-            *s++ = '0';
+        FPTYPE u_base = FPCONST(1.0);
-        } else {
+        const FPTYPE *pow_u = g_pos_pow;
-            *s++ = '0' + d;
+        for (int m = FPDECEXP; m; m >>= 1, pow_u++) {
+            if (m & e) {
+                u_base *= *pow_u;
             }
+        }
+        f *= u_base;
+    }
+
+    int d = 0;
+    int num_digits_left = num_digits;
+    for (int digit_index = signed_e; num_digits_left >= 0; --digit_index) {
+        FPTYPE u_base = FPCONST(1.0);
+        if (digit_index > 0) {
+            // Generate 10^digit_index for positive digit_index.
+            const FPTYPE *pow_u = g_pos_pow;
+            int target_index = digit_index;
+            for (int m = FPDECEXP; m; m >>= 1, pow_u++) {
+                if (m & target_index) {
+                    u_base *= *pow_u;
+                }
+            }
+        }
+        for (d = 0; d < 9; ++d) {
+            // This is essentially "if (f < u_base)", but with 2eps margin
+            // so that if f is just a tiny bit smaller, we treat it as
+            // equal (and accept the additional digit value).
+            if (!fp_ge_eps(f, u_base)) {
+                break;
+            }
+            f -= u_base;
+        }
+        // We calculate one more digit than we display, to use in rounding
+        // below.  So only emit the digit if it's one that we display.
+        if (num_digits_left > 0) {
+            // Emit this number (the leading digit).
+            *s++ = '0' + d;
             if (dec == 0 && prec > 0) {
                 *s++ = '.';
             }
-        f -= (FPTYPE)d;
+        }
+        --dec;
+        --num_digits_left;
+        if (digit_index <= 0) {
+            // Once we get below 1.0, we scale up f instead of calculting
+            // negative powers of 10 in u_base.  This provides better
+            // renditions of exact decimals like 1/16 etc.
             f *= FPCONST(10.0);
         }
-
+    }
-    // Round
+    // Rounding.  If the next digit to print is >= 5, round up.
-    // If we print non-exponential format (i.e. 'f'), but a digit we're going
+    if (d >= 5) {
-    // to round by (e) is too far away, then there's nothing to round.
-    if ((org_fmt != 'f' || e <= num_digits) && f >= FPCONST(5.0)) {
         char *rs = s;
         rs--;
         while (1) {
@@ -394,8 +437,11 @@ int mp_format_float(FPTYPE f, char *buf, size_t buf_size, char fmt, int prec, ch
                 }
             } else {
                 // Need at extra digit at the end to make room for the leading '1'
+                // but if we're at the buffer size limit, just drop the final digit.
+                if ((size_t)(s + 1 - buf) < buf_size) {
                     s++;
                 }
+            }
             char *ss = s;
             while (ss > rs) {
                 *ss = ss[-1];

shared-bindings/displayio/Display.c

@@ -54,7 +54,7 @@
 //|     Most people should not use this class directly. Use a specific display driver instead that will
 //|     contain the initialization sequence at minimum."""
 //|
-//|     def __init__(self, display_bus: _DisplayBus, init_sequence: ReadableBuffer, *, width: int, height: int, colstart: int = 0, rowstart: int = 0, rotation: int = 0, color_depth: int = 16, grayscale: bool = False, pixels_in_byte_share_row: bool = True, bytes_per_cell: int = 1, reverse_pixels_in_byte: bool = False, set_column_command: int = 0x2a, set_row_command: int = 0x2b, write_ram_command: int = 0x2c, backlight_pin: Optional[microcontroller.Pin] = None, brightness_command: Optional[int] = None, brightness: float = 1.0, auto_brightness: bool = False, single_byte_bounds: bool = False, data_as_commands: bool = False,  auto_refresh: bool = True, native_frames_per_second: int = 60, backlight_on_high: bool = True, SH1107_addressing: bool = False) -> None:
+//|     def __init__(self, display_bus: _DisplayBus, init_sequence: ReadableBuffer, *, width: int, height: int, colstart: int = 0, rowstart: int = 0, rotation: int = 0, color_depth: int = 16, grayscale: bool = False, pixels_in_byte_share_row: bool = True, bytes_per_cell: int = 1, reverse_pixels_in_byte: bool = False, set_column_command: int = 0x2a, set_row_command: int = 0x2b, write_ram_command: int = 0x2c, backlight_pin: Optional[microcontroller.Pin] = None, brightness_command: Optional[int] = None, brightness: float = 1.0, single_byte_bounds: bool = False, data_as_commands: bool = False,  auto_refresh: bool = True, native_frames_per_second: int = 60, backlight_on_high: bool = True, SH1107_addressing: bool = False) -> None:
 //|         r"""Create a Display object on the given display bus (`FourWire`, `ParallelBus` or `I2CDisplay`).
 //|
 //|         The ``init_sequence`` is bitpacked to minimize the ram impact. Every command begins with a
@@ -102,8 +102,7 @@
 //|         :param int write_ram_command: Command used to write pixels values into the update region. Ignored if data_as_commands is set.
 //|         :param microcontroller.Pin backlight_pin: Pin connected to the display's backlight
 //|         :param int brightness_command: Command to set display brightness. Usually available in OLED controllers.
-//|         :param float brightness: Initial display brightness. This value is ignored if auto_brightness is True.
+//|         :param float brightness: Initial display brightness.
-//|         :param bool auto_brightness: If True, brightness is controlled via an ambient light sensor or other mechanism.
 //|         :param bool single_byte_bounds: Display column and row commands use single bytes
 //|         :param bool data_as_commands: Treat all init and boundary data as SPI commands. Certain displays require this.
 //|         :param bool auto_refresh: Automatically refresh the screen
@@ -122,7 +121,7 @@ STATIC mp_obj_t displayio_display_make_new(const mp_obj_type_t *type, size_t n_a
            ARG_bytes_per_cell, ARG_reverse_pixels_in_byte, ARG_reverse_bytes_in_word,
            ARG_set_column_command, ARG_set_row_command, ARG_write_ram_command,
            ARG_set_vertical_scroll, ARG_backlight_pin, ARG_brightness_command,
-           ARG_brightness, ARG_auto_brightness, ARG_single_byte_bounds, ARG_data_as_commands,
+           ARG_brightness, ARG_single_byte_bounds, ARG_data_as_commands,
            ARG_auto_refresh, ARG_native_frames_per_second, ARG_backlight_on_high,
            ARG_SH1107_addressing, ARG_backlight_pwm_frequency };
     static const mp_arg_t allowed_args[] = {
@@ -146,7 +145,6 @@ STATIC mp_obj_t displayio_display_make_new(const mp_obj_type_t *type, size_t n_a
         { MP_QSTR_backlight_pin, MP_ARG_OBJ | MP_ARG_KW_ONLY, {.u_obj = mp_const_none} },
         { MP_QSTR_brightness_command, MP_ARG_INT | MP_ARG_KW_ONLY, {.u_int = NO_BRIGHTNESS_COMMAND} },
         { MP_QSTR_brightness, MP_ARG_OBJ | MP_ARG_KW_ONLY, {.u_obj = MP_OBJ_NEW_SMALL_INT(1)} },
-        { MP_QSTR_auto_brightness, MP_ARG_BOOL | MP_ARG_KW_ONLY, {.u_bool = false} },
         { MP_QSTR_single_byte_bounds, MP_ARG_BOOL | MP_ARG_KW_ONLY, {.u_bool = false} },
         { MP_QSTR_data_as_commands, MP_ARG_BOOL | MP_ARG_KW_ONLY, {.u_bool = false} },
         { MP_QSTR_auto_refresh, MP_ARG_BOOL | MP_ARG_KW_ONLY, {.u_bool = true} },
@@ -196,7 +194,6 @@ STATIC mp_obj_t displayio_display_make_new(const mp_obj_type_t *type, size_t n_a
         MP_OBJ_TO_PTR(backlight_pin),
         args[ARG_brightness_command].u_int,
         brightness,
-        args[ARG_auto_brightness].u_bool,
         args[ARG_single_byte_bounds].u_bool,
         args[ARG_data_as_commands].u_bool,
         args[ARG_auto_refresh].u_bool,
@@ -311,9 +308,7 @@ MP_PROPERTY_GETSET(displayio_display_auto_refresh_obj,
     (mp_obj_t)&displayio_display_set_auto_refresh_obj);
 
 //|     brightness: float
-//|     """The brightness of the display as a float. 0.0 is off and 1.0 is full brightness. When
+//|     """The brightness of the display as a float. 0.0 is off and 1.0 is full brightness."""
-//|     `auto_brightness` is True, the value of `brightness` will change automatically.
-//|     If `brightness` is set, `auto_brightness` will be disabled and will be set to False."""
 //|
 STATIC mp_obj_t displayio_display_obj_get_brightness(mp_obj_t self_in) {
     displayio_display_obj_t *self = native_display(self_in);
@@ -327,7 +322,6 @@ MP_DEFINE_CONST_FUN_OBJ_1(displayio_display_get_brightness_obj, displayio_displa
 
 STATIC mp_obj_t displayio_display_obj_set_brightness(mp_obj_t self_in, mp_obj_t brightness_obj) {
     displayio_display_obj_t *self = native_display(self_in);
-    common_hal_displayio_display_set_auto_brightness(self, false);
     mp_float_t brightness = mp_obj_get_float(brightness_obj);
     if (brightness < 0 || brightness > 1.0) {
         mp_raise_ValueError(translate("Brightness must be 0-1.0"));
@@ -344,34 +338,6 @@ MP_PROPERTY_GETSET(displayio_display_brightness_obj,
     (mp_obj_t)&displayio_display_get_brightness_obj,
     (mp_obj_t)&displayio_display_set_brightness_obj);
 
-//|     auto_brightness: bool
-//|     """True when the display brightness is adjusted automatically, based on an ambient
-//|     light sensor or other method. Note that some displays may have this set to True by default,
-//|     but not actually implement automatic brightness adjustment. `auto_brightness` is set to False
-//|     if `brightness` is set manually."""
-//|
-STATIC mp_obj_t displayio_display_obj_get_auto_brightness(mp_obj_t self_in) {
-    displayio_display_obj_t *self = native_display(self_in);
-    return mp_obj_new_bool(common_hal_displayio_display_get_auto_brightness(self));
-}
-MP_DEFINE_CONST_FUN_OBJ_1(displayio_display_get_auto_brightness_obj, displayio_display_obj_get_auto_brightness);
-
-STATIC mp_obj_t displayio_display_obj_set_auto_brightness(mp_obj_t self_in, mp_obj_t auto_brightness) {
-    displayio_display_obj_t *self = native_display(self_in);
-
-    common_hal_displayio_display_set_auto_brightness(self, mp_obj_is_true(auto_brightness));
-
-    return mp_const_none;
-}
-MP_DEFINE_CONST_FUN_OBJ_2(displayio_display_set_auto_brightness_obj, displayio_display_obj_set_auto_brightness);
-
-MP_PROPERTY_GETSET(displayio_display_auto_brightness_obj,
-    (mp_obj_t)&displayio_display_get_auto_brightness_obj,
-    (mp_obj_t)&displayio_display_set_auto_brightness_obj);
-
-
-
-
 //|     width: int
 //|     """Gets the width of the board"""
 //|
@@ -509,7 +475,6 @@ STATIC const mp_rom_map_elem_t displayio_display_locals_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_auto_refresh), MP_ROM_PTR(&displayio_display_auto_refresh_obj) },
 
     { MP_ROM_QSTR(MP_QSTR_brightness), MP_ROM_PTR(&displayio_display_brightness_obj) },
-    { MP_ROM_QSTR(MP_QSTR_auto_brightness), MP_ROM_PTR(&displayio_display_auto_brightness_obj) },
 
     { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&displayio_display_width_obj) },
     { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&displayio_display_height_obj) },

shared-bindings/displayio/Display.h

@@ -42,7 +42,7 @@ void common_hal_displayio_display_construct(displayio_display_obj_t *self,
     bool pixels_in_byte_share_row, uint8_t bytes_per_cell, bool reverse_pixels_in_byte, bool reverse_bytes_in_word,
     uint8_t set_column_command, uint8_t set_row_command, uint8_t write_ram_command,
     uint8_t *init_sequence, uint16_t init_sequence_len, const mcu_pin_obj_t *backlight_pin, uint16_t brightness_command,
-    mp_float_t brightness, bool auto_brightness,
+    mp_float_t brightness,
     bool single_byte_bounds, bool data_as_commands, bool auto_refresh, uint16_t native_frames_per_second,
     bool backlight_on_high, bool SH1107_addressing, uint16_t backlight_pwm_frequency);
 
@@ -59,9 +59,6 @@ uint16_t common_hal_displayio_display_get_height(displayio_display_obj_t *self);
 uint16_t common_hal_displayio_display_get_rotation(displayio_display_obj_t *self);
 void common_hal_displayio_display_set_rotation(displayio_display_obj_t *self, int rotation);
 
-bool common_hal_displayio_display_get_auto_brightness(displayio_display_obj_t *self);
-void common_hal_displayio_display_set_auto_brightness(displayio_display_obj_t *self, bool auto_brightness);
-
 bool common_hal_displayio_display_get_dither(displayio_display_obj_t *self);
 void common_hal_displayio_display_set_dither(displayio_display_obj_t *self, bool dither);
 

shared-bindings/displayio/OnDiskBitmap.c

@@ -48,7 +48,6 @@
 //|       import time
 //|       import pulseio
 //|
-//|       board.DISPLAY.auto_brightness = False
 //|       board.DISPLAY.brightness = 0
 //|       splash = displayio.Group()
 //|       board.DISPLAY.show(splash)

shared-bindings/framebufferio/FramebufferDisplay.c

@@ -173,9 +173,7 @@ MP_PROPERTY_GETSET(framebufferio_framebufferdisplay_auto_refresh_obj,
     (mp_obj_t)&framebufferio_framebufferdisplay_set_auto_refresh_obj);
 
 //|     brightness: float
-//|     """The brightness of the display as a float. 0.0 is off and 1.0 is full brightness. When
+//|     """The brightness of the display as a float. 0.0 is off and 1.0 is full brightness."""
-//|     `auto_brightness` is True, the value of `brightness` will change automatically.
-//|     If `brightness` is set, `auto_brightness` will be disabled and will be set to False."""
 //|
 STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_brightness(mp_obj_t self_in) {
     framebufferio_framebufferdisplay_obj_t *self = native_display(self_in);
@@ -189,7 +187,6 @@ MP_DEFINE_CONST_FUN_OBJ_1(framebufferio_framebufferdisplay_get_brightness_obj, f
 
 STATIC mp_obj_t framebufferio_framebufferdisplay_obj_set_brightness(mp_obj_t self_in, mp_obj_t brightness_obj) {
     framebufferio_framebufferdisplay_obj_t *self = native_display(self_in);
-    common_hal_framebufferio_framebufferdisplay_set_auto_brightness(self, false);
     mp_float_t brightness = mp_obj_get_float(brightness_obj);
     if (brightness < 0.0f || brightness > 1.0f) {
         mp_raise_ValueError(translate("Brightness must be 0-1.0"));
@@ -206,34 +203,6 @@ MP_PROPERTY_GETSET(framebufferio_framebufferdisplay_brightness_obj,
     (mp_obj_t)&framebufferio_framebufferdisplay_get_brightness_obj,
     (mp_obj_t)&framebufferio_framebufferdisplay_set_brightness_obj);
 
-//|     auto_brightness: bool
-//|     """True when the display brightness is adjusted automatically, based on an ambient
-//|     light sensor or other method. Note that some displays may have this set to True by default,
-//|     but not actually implement automatic brightness adjustment. `auto_brightness` is set to False
-//|     if `brightness` is set manually."""
-//|
-STATIC mp_obj_t framebufferio_framebufferdisplay_obj_get_auto_brightness(mp_obj_t self_in) {
-    framebufferio_framebufferdisplay_obj_t *self = native_display(self_in);
-    return mp_obj_new_bool(common_hal_framebufferio_framebufferdisplay_get_auto_brightness(self));
-}
-MP_DEFINE_CONST_FUN_OBJ_1(framebufferio_framebufferdisplay_get_auto_brightness_obj, framebufferio_framebufferdisplay_obj_get_auto_brightness);
-
-STATIC mp_obj_t framebufferio_framebufferdisplay_obj_set_auto_brightness(mp_obj_t self_in, mp_obj_t auto_brightness) {
-    framebufferio_framebufferdisplay_obj_t *self = native_display(self_in);
-
-    bool ok = common_hal_framebufferio_framebufferdisplay_set_auto_brightness(self, mp_obj_is_true(auto_brightness));
-    if (!ok) {
-        mp_raise_RuntimeError(translate("Brightness not adjustable"));
-    }
-
-    return mp_const_none;
-}
-MP_DEFINE_CONST_FUN_OBJ_2(framebufferio_framebufferdisplay_set_auto_brightness_obj, framebufferio_framebufferdisplay_obj_set_auto_brightness);
-
-MP_PROPERTY_GETSET(framebufferio_framebufferdisplay_auto_brightness_obj,
-    (mp_obj_t)&framebufferio_framebufferdisplay_get_auto_brightness_obj,
-    (mp_obj_t)&framebufferio_framebufferdisplay_set_auto_brightness_obj);
-
 //|     width: int
 //|     """Gets the width of the framebuffer"""
 //|
@@ -374,7 +343,6 @@ STATIC const mp_rom_map_elem_t framebufferio_framebufferdisplay_locals_dict_tabl
     { MP_ROM_QSTR(MP_QSTR_auto_refresh), MP_ROM_PTR(&framebufferio_framebufferdisplay_auto_refresh_obj) },
 
     { MP_ROM_QSTR(MP_QSTR_brightness), MP_ROM_PTR(&framebufferio_framebufferdisplay_brightness_obj) },
-    { MP_ROM_QSTR(MP_QSTR_auto_brightness), MP_ROM_PTR(&framebufferio_framebufferdisplay_auto_brightness_obj) },
 
     { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&framebufferio_framebufferdisplay_width_obj) },
     { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&framebufferio_framebufferdisplay_height_obj) },

shared-bindings/framebufferio/FramebufferDisplay.h

@@ -55,9 +55,6 @@ uint16_t common_hal_framebufferio_framebufferdisplay_get_height(framebufferio_fr
 uint16_t common_hal_framebufferio_framebufferdisplay_get_rotation(framebufferio_framebufferdisplay_obj_t *self);
 void common_hal_framebufferio_framebufferdisplay_set_rotation(framebufferio_framebufferdisplay_obj_t *self, int rotation);
 
-bool common_hal_framebufferio_framebufferdisplay_get_auto_brightness(framebufferio_framebufferdisplay_obj_t *self);
-bool common_hal_framebufferio_framebufferdisplay_set_auto_brightness(framebufferio_framebufferdisplay_obj_t *self, bool auto_brightness);
-
 mp_float_t common_hal_framebufferio_framebufferdisplay_get_brightness(framebufferio_framebufferdisplay_obj_t *self);
 bool common_hal_framebufferio_framebufferdisplay_set_brightness(framebufferio_framebufferdisplay_obj_t *self, mp_float_t brightness);
 

shared-bindings/qrio/PixelPolicy.c

@@ -39,13 +39,23 @@
 //|     ODD_BYTES: PixelPolicy
 //|     """The input buffer to `QRDecoder.decode` consists of greyscale values in positions 1, 3, …, and ignored bytes in positions 0, 2, …. This can decode directly from YUV images where the odd bytes hold the Y (luminance) data"""
 //|
+//|     RGB565_SWAPPED: PixelPolicy
+//|     """The input buffer to `QRDecoder.decode` consists of RGB565 values in byte-swapped order. Most cameras produce data in byte-swapped order. The green component is used."""
+//|
+//|     RGB565: PixelPolicy
+//|     """The input buffer to `QRDecoder.decode` consists of RGB565 values in native order. The green component is used."""
+//|
 
 MAKE_ENUM_VALUE(qrio_pixel_policy_type, qrio_pixel_policy, EVERY_BYTE, QRIO_EVERY_BYTE);
+MAKE_ENUM_VALUE(qrio_pixel_policy_type, qrio_pixel_policy, RGB565, QRIO_RGB565);
+MAKE_ENUM_VALUE(qrio_pixel_policy_type, qrio_pixel_policy, RGB565_SWAPPED, QRIO_RGB565_SWAPPED);
 MAKE_ENUM_VALUE(qrio_pixel_policy_type, qrio_pixel_policy, EVEN_BYTES, QRIO_EVEN_BYTES);
 MAKE_ENUM_VALUE(qrio_pixel_policy_type, qrio_pixel_policy, ODD_BYTES, QRIO_EVEN_BYTES);
 
 MAKE_ENUM_MAP(qrio_pixel_policy) {
     MAKE_ENUM_MAP_ENTRY(qrio_pixel_policy, EVERY_BYTE),
+    MAKE_ENUM_MAP_ENTRY(qrio_pixel_policy, RGB565),
+    MAKE_ENUM_MAP_ENTRY(qrio_pixel_policy, RGB565_SWAPPED),
     MAKE_ENUM_MAP_ENTRY(qrio_pixel_policy, EVEN_BYTES),
     MAKE_ENUM_MAP_ENTRY(qrio_pixel_policy, ODD_BYTES),
 };

shared-bindings/qrio/PixelPolicy.h

@@ -33,7 +33,7 @@
 extern const mp_obj_type_t qrio_pixel_policy_type;
 
 typedef enum {
-    QRIO_EVERY_BYTE, QRIO_EVEN_BYTES, QRIO_ODD_BYTES
+    QRIO_EVERY_BYTE, QRIO_EVEN_BYTES, QRIO_ODD_BYTES, QRIO_RGB565, QRIO_RGB565_SWAPPED
 } qrio_pixel_policy_t;
 
 extern const cp_enum_obj_t qrio_pixel_policy_EVERY_BYTE_obj;

shared-module/displayio/Display.c

@@ -51,7 +51,7 @@ void common_hal_displayio_display_construct(displayio_display_obj_t *self,
     uint8_t bytes_per_cell, bool reverse_pixels_in_byte, bool reverse_bytes_in_word, uint8_t set_column_command,
     uint8_t set_row_command, uint8_t write_ram_command,
     uint8_t *init_sequence, uint16_t init_sequence_len, const mcu_pin_obj_t *backlight_pin,
-    uint16_t brightness_command, mp_float_t brightness, bool auto_brightness,
+    uint16_t brightness_command, mp_float_t brightness,
     bool single_byte_bounds, bool data_as_commands, bool auto_refresh, uint16_t native_frames_per_second,
     bool backlight_on_high, bool SH1107_addressing, uint16_t backlight_pwm_frequency) {
 
@@ -70,7 +70,6 @@ void common_hal_displayio_display_construct(displayio_display_obj_t *self,
     self->set_row_command = set_row_command;
     self->write_ram_command = write_ram_command;
     self->brightness_command = brightness_command;
-    self->auto_brightness = auto_brightness;
     self->first_manual_refresh = !auto_refresh;
     self->data_as_commands = data_as_commands;
     self->backlight_on_high = backlight_on_high;
@@ -132,12 +131,8 @@ void common_hal_displayio_display_construct(displayio_display_obj_t *self,
         common_hal_never_reset_pin(backlight_pin);
         #endif
     }
-    if (!self->auto_brightness && (self->backlight_inout.base.type != &mp_type_NoneType ||
+
-                                   brightness_command != NO_BRIGHTNESS_COMMAND)) {
     common_hal_displayio_display_set_brightness(self, brightness);
-    } else {
-        self->current_brightness = -1.0;
-    }
 
     // Set the group after initialization otherwise we may send pixels while we delay in
     // initialization.
@@ -157,20 +152,11 @@ uint16_t common_hal_displayio_display_get_height(displayio_display_obj_t *self)
     return displayio_display_core_get_height(&self->core);
 }
 
-bool common_hal_displayio_display_get_auto_brightness(displayio_display_obj_t *self) {
-    return self->auto_brightness;
-}
-
-void common_hal_displayio_display_set_auto_brightness(displayio_display_obj_t *self, bool auto_brightness) {
-    self->auto_brightness = auto_brightness;
-}
-
 mp_float_t common_hal_displayio_display_get_brightness(displayio_display_obj_t *self) {
     return self->current_brightness;
 }
 
 bool common_hal_displayio_display_set_brightness(displayio_display_obj_t *self, mp_float_t brightness) {
-    self->updating_backlight = true;
     if (!self->backlight_on_high) {
         brightness = 1.0 - brightness;
     }
@@ -209,7 +195,6 @@ bool common_hal_displayio_display_set_brightness(displayio_display_obj_t *self,
         }
 
     }
-    self->updating_backlight = false;
     if (ok) {
         self->current_brightness = brightness;
     }
@@ -413,23 +398,8 @@ void common_hal_displayio_display_set_auto_refresh(displayio_display_obj_t *self
     self->auto_refresh = auto_refresh;
 }
 
-STATIC void _update_backlight(displayio_display_obj_t *self) {
-    if (!self->auto_brightness || self->updating_backlight) {
-        return;
-    }
-    if (supervisor_ticks_ms64() - self->last_backlight_refresh < 100) {
-        return;
-    }
-    // TODO(tannewt): Fade the backlight based on its existing value and a target value. The target
-    // should account for ambient light when possible.
-    common_hal_displayio_display_set_brightness(self, 1.0);
-
-    self->last_backlight_refresh = supervisor_ticks_ms64();
-}
-
 void displayio_display_background(displayio_display_obj_t *self) {
-    _update_backlight(self);
+    common_hal_displayio_display_set_brightness(self, 1.0);
-
     if (self->auto_refresh && (supervisor_ticks_ms64() - self->core.last_refresh) > self->native_ms_per_frame) {
         _refresh_display(self);
     }
@@ -452,7 +422,6 @@ void release_display(displayio_display_obj_t *self) {
 
 void reset_display(displayio_display_obj_t *self) {
     common_hal_displayio_display_set_auto_refresh(self, true);
-    self->auto_brightness = true;
     common_hal_displayio_display_show(self, NULL);
 }
 

shared-module/displayio/Display.h

@@ -45,7 +45,6 @@ typedef struct {
         pwmio_pwmout_obj_t backlight_pwm;
         #endif
     };
-    uint64_t last_backlight_refresh;
     uint64_t last_refresh_call;
     mp_float_t current_brightness;
     uint16_t brightness_command;
@@ -57,8 +56,6 @@ typedef struct {
     bool auto_refresh;
     bool first_manual_refresh;
     bool data_as_commands;
-    bool auto_brightness;
-    bool updating_backlight;
     bool backlight_on_high;
     // new quirk for sh1107
     bool SH1107_addressing;

shared-module/framebufferio/FramebufferDisplay.c

@@ -113,20 +113,6 @@ uint16_t common_hal_framebufferio_framebufferdisplay_get_height(framebufferio_fr
     return displayio_display_core_get_height(&self->core);
 }
 
-bool common_hal_framebufferio_framebufferdisplay_get_auto_brightness(framebufferio_framebufferdisplay_obj_t *self) {
-    if (self->framebuffer_protocol->get_auto_brightness) {
-        return self->framebuffer_protocol->get_auto_brightness(self->framebuffer);
-    }
-    return true;
-}
-
-bool common_hal_framebufferio_framebufferdisplay_set_auto_brightness(framebufferio_framebufferdisplay_obj_t *self, bool auto_brightness) {
-    if (self->framebuffer_protocol->set_auto_brightness) {
-        return self->framebuffer_protocol->set_auto_brightness(self->framebuffer, auto_brightness);
-    }
-    return false;
-}
-
 mp_float_t common_hal_framebufferio_framebufferdisplay_get_brightness(framebufferio_framebufferdisplay_obj_t *self) {
     if (self->framebuffer_protocol->get_brightness) {
         return self->framebuffer_protocol->get_brightness(self->framebuffer);

shared-module/framebufferio/FramebufferDisplay.h

@@ -43,7 +43,6 @@ typedef struct {
     mp_obj_t framebuffer;
     const struct _framebuffer_p_t *framebuffer_protocol;
     mp_buffer_info_t bufinfo;
-    uint64_t last_backlight_refresh;
     uint64_t last_refresh_call;
     uint16_t native_frames_per_second;
     uint16_t native_ms_per_frame;
@@ -61,10 +60,8 @@ void framebufferio_framebufferdisplay_collect_ptrs(framebufferio_framebufferdisp
 
 mp_obj_t common_hal_framebufferio_framebufferdisplay_get_framebuffer(framebufferio_framebufferdisplay_obj_t *self);
 
-typedef bool (*framebuffer_get_auto_brightness_fun)(mp_obj_t);
 typedef bool (*framebuffer_get_reverse_pixels_in_byte_fun)(mp_obj_t);
 typedef bool (*framebuffer_get_reverse_pixels_in_word_fun)(mp_obj_t);
-typedef bool (*framebuffer_set_auto_brightness_fun)(mp_obj_t, bool);
 typedef bool (*framebuffer_set_brightness_fun)(mp_obj_t, mp_float_t);
 typedef int (*framebuffer_get_bytes_per_cell_fun)(mp_obj_t);
 typedef int (*framebuffer_get_color_depth_fun)(mp_obj_t);
@@ -105,9 +102,6 @@ typedef struct _framebuffer_p_t {
     framebuffer_get_brightness_fun get_brightness;
     framebuffer_set_brightness_fun set_brightness;
 
-    // Optional -- default is no automatic brightness control
-    framebuffer_get_auto_brightness_fun get_auto_brightness;
-    framebuffer_set_auto_brightness_fun set_auto_brightness;
 } framebuffer_p_t;
 
 #endif // MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_FRAMEBUFFERDISPLAY_H

shared-module/qrio/QRDecoder.c

@@ -104,6 +104,20 @@ mp_obj_t shared_module_qrio_qrdecoder_decode(qrdecoder_qrdecoder_obj_t *self, co
     uint8_t *src = bufinfo->buf;
 
     switch (policy) {
+        case QRIO_RGB565: {
+            uint16_t *src16 = bufinfo->buf;
+            for (int i = 0; i < width * height; i++) {
+                framebuffer[i] = (src16[i] >> 3) & 0xfc;
+            }
+            break;
+        }
+        case QRIO_RGB565_SWAPPED: {
+            uint16_t *src16 = bufinfo->buf;
+            for (int i = 0; i < width * height; i++) {
+                framebuffer[i] = (__builtin_bswap16(src16[i]) >> 3) & 0xfc;
+            }
+            break;
+        }
         case QRIO_EVERY_BYTE:
             memcpy(framebuffer, src, width * height);
             break;
@@ -116,6 +130,7 @@ mp_obj_t shared_module_qrio_qrdecoder_decode(qrdecoder_qrdecoder_obj_t *self, co
             for (int i = 0; i < width * height; i++) {
                 framebuffer[i] = src[2 * i];
             }
+            break;
     }
     quirc_end(self->quirc);
 

supervisor/shared/web_workflow/static/directory.html

@@ -9,7 +9,7 @@
 </head>
 <body>
     <h1><a href="/"><img src="/favicon.ico"/></a>&nbsp;<span id="path"></span></h1>
-    <div id="usbwarning" style="display: none;">🛈 USB is using the storage. Only allowing reads. See <a href="https://learn.adafruit.com/circuitpython-essentials/circuitpython-storage">the CircuitPython Essentials: Storage guide</a> for details.</div>
+    <div id="usbwarning" style="display: none;">ℹ️ USB is using the storage. Only allowing reads. See <a href="https://learn.adafruit.com/circuitpython-essentials/circuitpython-storage">the CircuitPython Essentials: Storage guide</a> for details.</div>
     <template id="row"><tr><td></td><td></td><td><a></a></td><td></td><td><button class="delete">🗑️</button></td><td><a class="edit_link" href="">Edit</a></td></tr></template>
     <table>
         <thead><tr><th>Type</th><th>Size</th><th>Path</th><th>Modified</th><th></th></tr></thead>
@@ -18,5 +18,5 @@
     <hr>
     <input type="file" id="files" multiple><button type="submit" id="upload">Upload</button>
     <hr>
-    +🗀&nbsp;<input type="text" id="name"><button type="submit" id="mkdir">Create Directory</button>
+    +📁&nbsp;<input type="text" id="name"><button type="submit" id="mkdir">Create Directory</button>
 </body></html>

supervisor/shared/web_workflow/static/directory.js

@@ -6,6 +6,15 @@ var current_path;
 var editable = undefined;
 
 async function refresh_list() {
+
+    function compareValues(a, b) {
+        if (a.directory == b.directory && a.name.toLowerCase() === b.name.toLowerCase()) {
+          return 0;
+        } else {
+          return a.directory.toString().substring(3,4)+a.name.toLowerCase() < b.directory.toString().substring(3,4)+b.name.toLowerCase() ? -1 : 1;
+        }
+    }
+
     current_path = window.location.hash.substr(1);
     if (current_path == "") {
         current_path = "/";
@@ -46,7 +55,7 @@ async function refresh_list() {
     if (window.location.path != "/fs/") {
         var clone = template.content.cloneNode(true);
         var td = clone.querySelectorAll("td");
-        td[0].textContent = "🗀";
+        td[0].textContent = "📁";
         var path = clone.querySelector("a");
         let parent = new URL("..", "file://" + current_path);
         path.href = "#" + parent.pathname;
@@ -56,11 +65,13 @@ async function refresh_list() {
         new_children.push(clone);
     }
 
+    data.sort(compareValues);
+
     for (const f of data) {
         // Clone the new row and insert it into the table
         var clone = template.content.cloneNode(true);
         var td = clone.querySelectorAll("td");
-        var icon = "⬇";
+        var icon = "⬇️";
         var file_path = current_path + f.name;
         let api_url = new URL("/fs" + file_path, url_base);
         let edit_url = "/edit/#" + file_path;
@@ -72,12 +83,12 @@ async function refresh_list() {
         }
 
         if (f.directory) {
-            icon = "🗀";
+            icon = "📁";
         } else if(f.name.endsWith(".txt") ||
                   f.name.endsWith(".py") ||
                   f.name.endsWith(".js") ||
                   f.name.endsWith(".json")) {
-            icon = "🖹";
+            icon = "📄";
         } else if (f.name.endsWith(".html")) {
             icon = "🌐";
         }
@@ -92,9 +103,11 @@ async function refresh_list() {
         delete_button.disabled = !editable;
         delete_button.onclick = del;
 
+        if (editable && !f.directory) {
             edit_url = new URL(edit_url, url_base);
             let edit_link = clone.querySelector(".edit_link");
             edit_link.href = edit_url
+        }
 
         new_children.push(clone);
     }
@@ -149,11 +162,11 @@ async function upload(e) {
         )
         if (response.ok) {
             refresh_list();
+        }
+    }
     files.value = "";
     upload_button.disabled = true;
 }
-    }
-}
 
 async function del(e) {
     let fn = new URL(e.target.value);

supervisor/shared/web_workflow/web_workflow.c

@@ -659,13 +659,13 @@ static void _reply_with_file(socketpool_socket_obj_t *socket, _request *request,
     mp_printf(&_socket_print, "Content-Length: %d\r\n", total_length);
     // TODO: Make this a table to save space.
     if (_endswith(filename, ".txt") || _endswith(filename, ".py")) {
-        _send_str(socket, "Content-Type: text/plain\r\n");
+        _send_strs(socket, "Content-Type: text/plain", ";charset=UTF-8\r\n", NULL);
     } else if (_endswith(filename, ".js")) {
-        _send_str(socket, "Content-Type: text/javascript\r\n");
+        _send_strs(socket, "Content-Type: text/javascript", ";charset=UTF-8\r\n", NULL);
     } else if (_endswith(filename, ".html")) {
-        _send_str(socket, "Content-Type: text/html\r\n");
+        _send_strs(socket, "Content-Type: text/html", ";charset=UTF-8\r\n", NULL);
     } else if (_endswith(filename, ".json")) {
-        _send_str(socket, "Content-Type: application/json\r\n");
+        _send_strs(socket, "Content-Type: application/json", ";charset=UTF-8\r\n", NULL);
     } else {
         _send_str(socket, "Content-Type: application/octet-stream\r\n");
     }
@@ -966,6 +966,16 @@ static void _reply_websocket_upgrade(socketpool_socket_obj_t *socket, _request *
     // socket is now closed and "disconnected".
 }
 
+static uint8_t _hex2nibble(char h) {
+    if ('0' <= h && h <= '9') {
+        return h - '0';
+    } else if ('A' <= h && h <= 'F') {
+        return h - 'A' + 0xa;
+    }
+    // Shouldn't usually use lower case.
+    return h - 'a' + 0xa;
+}
+
 static bool _reply(socketpool_socket_obj_t *socket, _request *request) {
     if (request->redirect) {
         _reply_redirect(socket, request, request->path);
@@ -983,6 +993,26 @@ static bool _reply(socketpool_socket_obj_t *socket, _request *request) {
                 _reply_forbidden(socket, request);
             }
         } else {
+            // Decode any percent encoded bytes so that we're left with UTF-8.
+            // We only do this on /fs/ paths and after redirect so that any
+            // path echoing we do stays encoded.
+            size_t o = 0;
+            size_t i = 0;
+            while (i < strlen(request->path)) {
+                if (request->path[i] == '%') {
+                    request->path[o] = _hex2nibble(request->path[i + 1]) << 4 | _hex2nibble(request->path[i + 2]);
+                    i += 3;
+                } else {
+                    if (i != o) {
+                        request->path[o] = request->path[i];
+                    }
+                    i += 1;
+                }
+                o += 1;
+            }
+            if (o < i) {
+                request->path[o] = '\0';
+            }
             char *path = request->path + 3;
             size_t pathlen = strlen(path);
             FATFS *fs = filesystem_circuitpy();
@@ -1350,6 +1380,8 @@ void supervisor_web_workflow_background(void) {
         // Close the active socket if it is no longer connected.
         common_hal_socketpool_socket_close(&active);
     }
+
+    websocket_background();
 }
 
 void supervisor_stop_web_workflow(void) {

supervisor/shared/web_workflow/websocket.c

@@ -26,6 +26,9 @@
 
 #include "supervisor/shared/web_workflow/websocket.h"
 
+#include "py/ringbuf.h"
+#include "py/runtime.h"
+#include "shared/runtime/interrupt_char.h"
 #include "supervisor/shared/title_bar.h"
 
 // TODO: Remove ESP specific stuff. For now, it is useful as we refine the server.
@@ -43,6 +46,11 @@ typedef struct {
     size_t payload_remaining;
 } _websocket;
 
+// Buffer the incoming serial data in the background so that we can look for the
+// interrupt character.
+STATIC ringbuf_t _incoming_ringbuf;
+STATIC uint8_t _buf[16];
+
 static _websocket cp_serial;
 
 static const char *TAG = "CP websocket";
@@ -50,6 +58,8 @@ static const char *TAG = "CP websocket";
 void websocket_init(void) {
     cp_serial.socket.num = -1;
     cp_serial.socket.connected = false;
+
+    ringbuf_init(&_incoming_ringbuf, _buf, sizeof(_buf) - 1);
 }
 
 void websocket_handoff(socketpool_socket_obj_t *socket) {
@@ -193,16 +203,16 @@ bool websocket_available(void) {
     if (!websocket_connected()) {
         return false;
     }
-    _read_next_frame_header();
+    websocket_background();
-    return cp_serial.payload_remaining > 0 && cp_serial.frame_index >= cp_serial.frame_len;
+    return ringbuf_num_filled(&_incoming_ringbuf) > 0;
 }
 
 char websocket_read_char(void) {
-    uint8_t c;
+    websocket_background();
-    if (!_read_next_payload_byte(&c)) {
+    if (ringbuf_num_filled(&_incoming_ringbuf) > 0) {
-        c = -1;
+        return ringbuf_get(&_incoming_ringbuf);
     }
-    return c;
+    return -1;
 }
 
 static void _websocket_send(_websocket *ws, const char *text, size_t len) {
@@ -246,3 +256,15 @@ static void _websocket_send(_websocket *ws, const char *text, size_t len) {
 void websocket_write(const char *text, size_t len) {
     _websocket_send(&cp_serial, text, len);
 }
+
+void websocket_background(void) {
+    uint8_t c;
+    while (ringbuf_num_empty(&_incoming_ringbuf) > 0 &&
+           _read_next_payload_byte(&c)) {
+        if (c == mp_interrupt_char) {
+            mp_sched_keyboard_interrupt();
+            continue;
+        }
+        ringbuf_put(&_incoming_ringbuf, c);
+    }
+}

supervisor/shared/web_workflow/websocket.h

@@ -35,4 +35,5 @@ void websocket_handoff(socketpool_socket_obj_t *socket);
 bool websocket_connected(void);
 bool websocket_available(void);
 char websocket_read_char(void);
+void websocket_background(void);
 void websocket_write(const char *text, size_t len);

tests/float/float_format_ftoe.py

@@ -0,0 +1,4 @@
+# check a case where rounding was suppressed inappropriately when "f" was
+# promoted to "e" for large numbers.
+v = 8.888e32
+print("%.2f" % v)  # '%.2f' format with e32 becomes '%.2e', expect 8.89e+32.

tests/float/float_format_ftoe.py.exp

@@ -0,0 +1 @@
+8.89e+32

tests/float/float_format_ints.py

@@ -0,0 +1,31 @@
+# Test that integers format to exact values.
+
+for b in [13, 123, 457, 23456]:
+    for r in range(1, 10):
+        e_fmt = "{:." + str(r) + "e}"
+        f_fmt = "{:." + str(r) + "f}"
+        g_fmt = "{:." + str(r) + "g}"
+        for e in range(0, 5):
+            f = b * (10**e)
+            title = str(b) + " x 10^" + str(e)
+            print(title, "with format", e_fmt, "gives", e_fmt.format(f))
+            print(title, "with format", f_fmt, "gives", f_fmt.format(f))
+            print(title, "with format", g_fmt, "gives", g_fmt.format(f))
+
+# Check that powers of 10 (that fit in float32) format correctly.
+for i in range(31):
+    # It works to 12 digits on all platforms *except* qemu-arm, where
+    # 10^11 comes out as 10000000820 or something.
+    print("{:.7g}".format(float("1e" + str(i))))
+
+# 16777215 is 2^24 - 1, the largest integer that can be completely held
+# in a float32.
+print("{:f}".format(16777215))
+# 4294967040 = 16777215 * 128 is the largest integer that is exactly
+# represented by a float32 and that will also fit within a (signed) int32.
+# The upper bound of our integer-handling code is actually double this,
+# but that constant might cause trouble on systems using 32 bit ints.
+print("{:f}".format(2147483520))
+# Very large positive integers can be a test for precision and resolution.
+# This is a weird way to represent 1e38 (largest power of 10 for float32).
+print("{:.6e}".format(float("9" * 30 + "e8")))

tests/float/float_format_ints_doubleprec.py

@@ -0,0 +1,15 @@
+# Test formatting of very large ints.
+# Relies on double-precision floats.
+
+import array
+import sys
+
+# Challenging way to express 1e200 and 1e100.
+print("{:.12e}".format(float("9" * 400 + "e-200")))
+print("{:.12e}".format(float("9" * 400 + "e-300")))
+
+# These correspond to the binary representation of 1e200 in float64s:
+v1 = 0x54B249AD2594C37D  # 1e100
+v2 = 0x6974E718D7D7625A  # 1e200
+print("{:.12e}".format(array.array("d", v1.to_bytes(8, sys.byteorder))[0]))
+print("{:.12e}".format(array.array("d", v2.to_bytes(8, sys.byteorder))[0]))

tests/run-tests.py

@@ -426,6 +426,7 @@ def run_tests(pyb, tests, args, result_dir, num_threads=1):
     if upy_float_precision < 64:
         skip_tests.add("float/float_divmod.py")  # tested by float/float_divmod_relaxed.py instead
         skip_tests.add("float/float2int_doubleprec_intbig.py")
+        skip_tests.add("float/float_format_ints_doubleprec.py")
         skip_tests.add("float/float_parse_doubleprec.py")
 
     if not has_complex:

tools/tinytest-codegen.py

@@ -100,6 +100,7 @@ exclude_tests = (
     "float/float_divmod.py",
     # requires double precision floating point to work
     "float/float2int_doubleprec_intbig.py",
+    "float/float_format_ints_doubleprec.py",
     "float/float_parse_doubleprec.py",
     # inline asm FP tests (require Cortex-M4)
     "inlineasm/asmfpaddsub.py",