Merge remote-tracking branch 'origin/main' into defining_parameters

This commit is contained in:
Jeff Epler 2021-04-29 08:18:39 -05:00
commit 5fa7186396
45 changed files with 2023 additions and 382 deletions

View File

@ -460,7 +460,7 @@ Renders as:
Documentation References to other Libraries Documentation References to other Libraries
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
When you need to reference documentation in other libraries you should include the class by using single When you need to make references to documentation in other libraries you should refer the class using single
backticks ``:class:`~adafruit_motor.servo.Servo```. You must also add the reference in the ``conf.py`` file in the backticks ``:class:`~adafruit_motor.servo.Servo```. You must also add the reference in the ``conf.py`` file in the
``intersphinx_mapping section`` by adding a new entry:: ``intersphinx_mapping section`` by adding a new entry::

View File

@ -6,7 +6,7 @@ msgstr ""
"Project-Id-Version: PACKAGE VERSION\n" "Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-01-04 12:55-0600\n" "POT-Creation-Date: 2021-01-04 12:55-0600\n"
"PO-Revision-Date: 2021-04-07 12:23+0000\n" "PO-Revision-Date: 2021-04-28 16:11+0000\n"
"Last-Translator: Reza Almanda <rezaalmanda27@gmail.com>\n" "Last-Translator: Reza Almanda <rezaalmanda27@gmail.com>\n"
"Language-Team: LANGUAGE <LL@li.org>\n" "Language-Team: LANGUAGE <LL@li.org>\n"
"Language: ID\n" "Language: ID\n"
@ -14,7 +14,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n" "Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n" "Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n" "Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 4.6-dev\n" "X-Generator: Weblate 4.7-dev\n"
#: main.c #: main.c
msgid "" msgid ""
@ -698,6 +698,7 @@ msgstr ""
"digunakan" "digunakan"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -753,14 +754,6 @@ msgid ""
msgstr "" msgstr ""
"Koneksi telah terputus dan tidak dapat lagi digunakan. Buat koneksi baru." "Koneksi telah terputus dan tidak dapat lagi digunakan. Buat koneksi baru."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "File .mpy rusak"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Kode raw rusak"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "" msgstr ""
@ -1315,7 +1308,8 @@ msgstr "Fase tidak valid"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Pin tidak valid" msgstr "Pin tidak valid"
@ -1670,11 +1664,11 @@ msgstr "Hanya 8 atau 16 bit mono dengan "
#: ports/esp32s2/common-hal/wifi/__init__.c #: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported" msgid "Only IPv4 addresses supported"
msgstr "" msgstr "Hanya alamat IPv4 yang didukung"
#: ports/esp32s2/common-hal/socketpool/SocketPool.c #: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported" msgid "Only IPv4 sockets supported"
msgstr "" msgstr "Hanysa socket IPv4 yang didukung"
#: shared-module/displayio/OnDiskBitmap.c #: shared-module/displayio/OnDiskBitmap.c
#, c-format #, c-format
@ -1698,6 +1692,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -1715,15 +1710,15 @@ msgstr ""
#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
msgid "Operation timed out" msgid "Operation timed out"
msgstr "" msgstr "Waktu habis"
#: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
msgid "Out of memory" msgid "Out of memory"
msgstr "" msgstr "Kehabisan memori"
#: ports/esp32s2/common-hal/socketpool/SocketPool.c #: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Out of sockets" msgid "Out of sockets"
msgstr "" msgstr "Kehabisan socket"
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c #: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Out-buffer elements must be <= 4 bytes long" msgid "Out-buffer elements must be <= 4 bytes long"
@ -1769,7 +1764,7 @@ msgstr "ParallelBus belum didukung"
#: ports/esp32s2/common-hal/audiobusio/__init__.c #: ports/esp32s2/common-hal/audiobusio/__init__.c
msgid "Peripheral in use" msgid "Peripheral in use"
msgstr "" msgstr "Periferal sedang digunakan"
#: py/moduerrno.c #: py/moduerrno.c
msgid "Permission denied" msgid "Permission denied"
@ -1781,7 +1776,7 @@ msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Pin count too large" msgid "Pin count too large"
msgstr "" msgstr "Jumlah pin terlalu besar"
#: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
#: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c
@ -1823,7 +1818,7 @@ msgstr ""
#: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c #: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c
msgid "Pins must be sequential" msgid "Pins must be sequential"
msgstr "" msgstr "Pin harus berurutan"
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Pins must share PWM slice" msgid "Pins must share PWM slice"
@ -2623,10 +2618,6 @@ msgstr "hanya mampu memiliki hingga 4 parameter untuk Thumb assembly"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr ""
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3139,6 +3130,14 @@ msgstr "identifier didefinisi ulang sebagai global"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "identifier didefinisi ulang sebagai nonlocal" msgstr "identifier didefinisi ulang sebagai nonlocal"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "" msgstr ""
@ -3258,6 +3257,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "" msgstr ""
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "argumen-argumen tidak valid" msgstr "argumen-argumen tidak valid"
@ -3267,10 +3270,6 @@ msgstr "argumen-argumen tidak valid"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "cert tidak valid"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3301,10 +3300,6 @@ msgstr ""
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "key tidak valid"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "micropython decorator tidak valid" msgstr "micropython decorator tidak valid"
@ -4247,11 +4242,11 @@ msgstr ""
#: ports/esp32s2/common-hal/wifi/Radio.c #: ports/esp32s2/common-hal/wifi/Radio.c
msgid "wifi is not enabled" msgid "wifi is not enabled"
msgstr "" msgstr "wifi tidak diaktifkan"
#: shared-bindings/_bleio/Adapter.c #: shared-bindings/_bleio/Adapter.c
msgid "window must be <= interval" msgid "window must be <= interval"
msgstr "" msgstr "jendela harus <= interval"
#: extmod/ulab/code/numpy/numerical/numerical.c #: extmod/ulab/code/numpy/numerical/numerical.c
msgid "wrong axis index" msgid "wrong axis index"
@ -4314,6 +4309,18 @@ msgstr "zi harus berjenis float"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "" msgstr ""
#~ msgid "Corrupt .mpy file"
#~ msgstr "File .mpy rusak"
#~ msgid "Corrupt raw code"
#~ msgstr "Kode raw rusak"
#~ msgid "invalid cert"
#~ msgstr "cert tidak valid"
#~ msgid "invalid key"
#~ msgstr "key tidak valid"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Fungsi Viper saat ini tidak mendukung lebih dari 4 argumen" #~ msgstr "Fungsi Viper saat ini tidak mendukung lebih dari 4 argumen"

View File

@ -681,6 +681,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -1285,7 +1286,8 @@ msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "" msgstr ""
@ -1663,6 +1665,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""

View File

@ -684,6 +684,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -736,14 +737,6 @@ msgid ""
"connection." "connection."
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr ""
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "" msgstr ""
@ -1296,7 +1289,8 @@ msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "" msgstr ""
@ -1674,6 +1668,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2577,10 +2572,6 @@ msgstr ""
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr ""
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3093,6 +3084,14 @@ msgstr ""
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "" msgstr ""
@ -3212,6 +3211,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "" msgstr ""
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "" msgstr ""
@ -3221,10 +3224,6 @@ msgstr ""
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr ""
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3255,10 +3254,6 @@ msgstr ""
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr ""
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "" msgstr ""

View File

@ -694,6 +694,7 @@ msgstr ""
"Die Frequenz eines bereits verwendeten Timers kann nicht variiert werden" "Die Frequenz eines bereits verwendeten Timers kann nicht variiert werden"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "Kann nicht auf Flanke wecken, nur auf Level." msgstr "Kann nicht auf Flanke wecken, nur auf Level."
@ -751,14 +752,6 @@ msgstr ""
"Die Verbindung wurde getrennt und kann nicht mehr verwendet werden. " "Die Verbindung wurde getrennt und kann nicht mehr verwendet werden. "
"Erstellen Sie eine neue Verbindung." "Erstellen Sie eine neue Verbindung."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Beschädigte .mpy Datei"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Beschädigter raw code"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "Konnte Kamera nicht initialisieren" msgstr "Konnte Kamera nicht initialisieren"
@ -1316,7 +1309,8 @@ msgstr "Ungültige Phase"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Ungültiger Pin" msgstr "Ungültiger Pin"
@ -1701,6 +1695,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2636,10 +2631,6 @@ msgstr "kann nur bis zu 4 Parameter für die Thumb assembly haben"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "kann nur bis zu 4 Parameter für die Xtensa assembly haben" msgstr "kann nur bis zu 4 Parameter für die Xtensa assembly haben"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "kann nur Bytecode speichern"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3166,6 +3157,14 @@ msgstr "Bezeichner als global neu definiert"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "Bezeichner als nonlocal definiert" msgstr "Bezeichner als nonlocal definiert"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "unvollständiges Format" msgstr "unvollständiges Format"
@ -3285,6 +3284,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "Das Intervall muss im Bereich %s-%s sein" msgstr "Das Intervall muss im Bereich %s-%s sein"
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "ungültige argumente" msgstr "ungültige argumente"
@ -3294,10 +3297,6 @@ msgstr "ungültige argumente"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "ungültiges cert"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3328,10 +3327,6 @@ msgstr "ungültiger Formatbezeichner"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "ungültiger Schlüssel"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "ungültiger micropython decorator" msgstr "ungültiger micropython decorator"
@ -4357,6 +4352,21 @@ msgstr ""
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "" msgstr ""
#~ msgid "Corrupt .mpy file"
#~ msgstr "Beschädigte .mpy Datei"
#~ msgid "Corrupt raw code"
#~ msgstr "Beschädigter raw code"
#~ msgid "can only save bytecode"
#~ msgstr "kann nur Bytecode speichern"
#~ msgid "invalid cert"
#~ msgstr "ungültiges cert"
#~ msgid "invalid key"
#~ msgstr "ungültiger Schlüssel"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Viper-Funktionen unterstützen derzeit nicht mehr als 4 Argumente" #~ msgstr "Viper-Funktionen unterstützen derzeit nicht mehr als 4 Argumente"

View File

@ -681,6 +681,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -733,14 +734,6 @@ msgid ""
"connection." "connection."
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr ""
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "" msgstr ""
@ -1293,7 +1286,8 @@ msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "" msgstr ""
@ -1671,6 +1665,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2574,10 +2569,6 @@ msgstr ""
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr ""
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3090,6 +3081,14 @@ msgstr ""
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "" msgstr ""
@ -3209,6 +3208,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "" msgstr ""
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "" msgstr ""
@ -3218,10 +3221,6 @@ msgstr ""
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr ""
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3252,10 +3251,6 @@ msgstr ""
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr ""
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "" msgstr ""

View File

@ -692,6 +692,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Cannot vary frequency on a timer that is already in use" msgstr "Cannot vary frequency on a timer that is already in use"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "Cannot wake on pin edge. Only level." msgstr "Cannot wake on pin edge. Only level."
@ -748,14 +749,6 @@ msgstr ""
"Connection has been disconnected and can no longer be used. Create a new " "Connection has been disconnected and can no longer be used. Create a new "
"connection." "connection."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Corrupt .mpy file"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Corrupt raw code"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "Could not initialise camera" msgstr "Could not initialise camera"
@ -1310,7 +1303,8 @@ msgstr "Invalid phase"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Invalid pin" msgstr "Invalid pin"
@ -1692,6 +1686,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "Only one TouchAlarm can be set in deep sleep." msgstr "Only one TouchAlarm can be set in deep sleep."
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "Only one alarm.time alarm can be set." msgstr "Only one alarm.time alarm can be set."
@ -2618,10 +2613,6 @@ msgstr "Can only have up to 4 parameters to thumb assembly"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "Can only have up to 4 parameters to xtensa assembly" msgstr "Can only have up to 4 parameters to xtensa assembly"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "Can only save bytecode"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "Can't add special method to already-subclassed class" msgstr "Can't add special method to already-subclassed class"
@ -3137,6 +3128,14 @@ msgstr "identifier redefined as global"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "identifier redefined as nonlocal" msgstr "identifier redefined as nonlocal"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "incomplete format" msgstr "incomplete format"
@ -3256,6 +3255,10 @@ msgstr "interp is defined for 1D arrays of equal length"
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "interval must be in range %s-%s" msgstr "interval must be in range %s-%s"
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "invalid arguments" msgstr "invalid arguments"
@ -3265,10 +3268,6 @@ msgstr "invalid arguments"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgstr "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "invalid cert"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3299,10 +3298,6 @@ msgstr "invalid format specifier"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "invalid hostname" msgstr "invalid hostname"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "invalid key"
#: py/compile.c #: py/compile.c
#, fuzzy #, fuzzy
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
@ -4314,6 +4309,21 @@ msgstr "zi must be of float type"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "zi must be of shape (n_section, 2)" msgstr "zi must be of shape (n_section, 2)"
#~ msgid "Corrupt .mpy file"
#~ msgstr "Corrupt .mpy file"
#~ msgid "Corrupt raw code"
#~ msgstr "Corrupt raw code"
#~ msgid "can only save bytecode"
#~ msgstr "Can only save bytecode"
#~ msgid "invalid cert"
#~ msgstr "invalid cert"
#~ msgid "invalid key"
#~ msgstr "invalid key"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Viper functions don't currently support more than 4 arguments" #~ msgstr "Viper functions don't currently support more than 4 arguments"

View File

@ -8,7 +8,7 @@ msgstr ""
"Project-Id-Version: \n" "Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-01-04 12:55-0600\n" "POT-Creation-Date: 2021-01-04 12:55-0600\n"
"PO-Revision-Date: 2021-04-25 18:43+0000\n" "PO-Revision-Date: 2021-04-28 16:11+0000\n"
"Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n" "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
"Language-Team: \n" "Language-Team: \n"
"Language: es\n" "Language: es\n"
@ -701,6 +701,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "No puede variar la frecuencia en un temporizador que ya está en uso" msgstr "No puede variar la frecuencia en un temporizador que ya está en uso"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "No puede despertar en pin edge, solo en nivel." msgstr "No puede despertar en pin edge, solo en nivel."
@ -757,14 +758,6 @@ msgstr ""
"La conexión se ha desconectado y ya no se puede usar. Crea una nueva " "La conexión se ha desconectado y ya no se puede usar. Crea una nueva "
"conexión." "conexión."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Archivo .mpy corrupto"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Código crudo corrupto"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "No se puede inicializar Camera" msgstr "No se puede inicializar Camera"
@ -1327,7 +1320,8 @@ msgstr "Fase inválida"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Pin inválido" msgstr "Pin inválido"
@ -1715,6 +1709,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "Solamente una TouchAlarm puede ser configurada durante deep sleep." msgstr "Solamente una TouchAlarm puede ser configurada durante deep sleep."
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "Solamente una alarm.time puede ser configurada." msgstr "Solamente una alarm.time puede ser configurada."
@ -2651,10 +2646,6 @@ msgstr "solo puede tener hasta 4 parámetros para ensamblar Thumb"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "solo puede tener hasta 4 parámetros para ensamblador Xtensa" msgstr "solo puede tener hasta 4 parámetros para ensamblador Xtensa"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "solo puede almacenar bytecode"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "no se puede agregar un método a una clase ya subclasificada" msgstr "no se puede agregar un método a una clase ya subclasificada"
@ -3174,6 +3165,14 @@ msgstr "identificador redefinido como global"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "identificador redefinido como nonlocal" msgstr "identificador redefinido como nonlocal"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr "archivo .mpy incompatible"
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr "arquitectura nativa de .mpy incompatible"
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "formato incompleto" msgstr "formato incompleto"
@ -3293,6 +3292,10 @@ msgstr "interp está definido para arreglos de 1D del mismo tamaño"
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "el intervalo debe ser der rango %s-%s" msgstr "el intervalo debe ser der rango %s-%s"
#: py/compile.c
msgid "invalid architecture"
msgstr "arquitectura inválida"
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "argumentos inválidos" msgstr "argumentos inválidos"
@ -3302,10 +3305,6 @@ msgstr "argumentos inválidos"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "los bits_per_pixel %d no son validos, deben ser 1, 4, 8, 16, 24 o 32" msgstr "los bits_per_pixel %d no son validos, deben ser 1, 4, 8, 16, 24 o 32"
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "certificado inválido"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "decorador invalido" msgstr "decorador invalido"
@ -3336,10 +3335,6 @@ msgstr "especificador de formato inválido"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "hostname inválido" msgstr "hostname inválido"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "llave inválida"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "decorador de micropython inválido" msgstr "decorador de micropython inválido"
@ -4358,6 +4353,21 @@ msgstr "zi debe ser de tipo flotante"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "zi debe ser una forma (n_section,2)" msgstr "zi debe ser una forma (n_section,2)"
#~ msgid "Corrupt .mpy file"
#~ msgstr "Archivo .mpy corrupto"
#~ msgid "Corrupt raw code"
#~ msgstr "Código crudo corrupto"
#~ msgid "can only save bytecode"
#~ msgstr "solo puede almacenar bytecode"
#~ msgid "invalid cert"
#~ msgstr "certificado inválido"
#~ msgid "invalid key"
#~ msgstr "llave inválida"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "funciones Viper no soportan por el momento, más de 4 argumentos" #~ msgstr "funciones Viper no soportan por el momento, más de 4 argumentos"

View File

@ -688,6 +688,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -741,14 +742,6 @@ msgid ""
"connection." "connection."
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr ""
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "" msgstr ""
@ -1308,7 +1301,8 @@ msgstr "Mali ang phase"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Mali ang pin" msgstr "Mali ang pin"
@ -1689,6 +1683,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2603,10 +2598,6 @@ msgstr "maaari lamang magkaroon ng hanggang 4 na parameter sa Thumb assembly"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "maaari lamang magkaroon ng hanggang 4 na parameter sa Xtensa assembly" msgstr "maaari lamang magkaroon ng hanggang 4 na parameter sa Xtensa assembly"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "maaring i-save lamang ang bytecode"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3131,6 +3122,14 @@ msgstr "identifier ginawang global"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "identifier ginawang nonlocal" msgstr "identifier ginawang nonlocal"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "hindi kumpleto ang format" msgstr "hindi kumpleto ang format"
@ -3250,6 +3249,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "" msgstr ""
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "mali ang mga argumento" msgstr "mali ang mga argumento"
@ -3259,10 +3262,6 @@ msgstr "mali ang mga argumento"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "mali ang cert"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3293,10 +3292,6 @@ msgstr "mali ang format specifier"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "mali ang key"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "mali ang micropython decorator" msgstr "mali ang micropython decorator"
@ -4317,6 +4312,15 @@ msgstr ""
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "" msgstr ""
#~ msgid "can only save bytecode"
#~ msgstr "maaring i-save lamang ang bytecode"
#~ msgid "invalid cert"
#~ msgstr "mali ang cert"
#~ msgid "invalid key"
#~ msgstr "mali ang key"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "" #~ msgstr ""
#~ "Ang mga function ng Viper ay kasalukuyang hindi sumusuporta sa higit sa 4 " #~ "Ang mga function ng Viper ay kasalukuyang hindi sumusuporta sa higit sa 4 "

View File

@ -8,7 +8,7 @@ msgstr ""
"Project-Id-Version: 0.1\n" "Project-Id-Version: 0.1\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-01-04 12:55-0600\n" "POT-Creation-Date: 2021-01-04 12:55-0600\n"
"PO-Revision-Date: 2021-04-24 14:29+0000\n" "PO-Revision-Date: 2021-04-28 16:11+0000\n"
"Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n" "Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n"
"Language: fr\n" "Language: fr\n"
"MIME-Version: 1.0\n" "MIME-Version: 1.0\n"
@ -707,6 +707,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Impossible de faire varier la fréquence sur un minuteur déjà utilisée" msgstr "Impossible de faire varier la fréquence sur un minuteur déjà utilisée"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "Ne peut reveillé sur le board de broche. Seuleument à niveau." msgstr "Ne peut reveillé sur le board de broche. Seuleument à niveau."
@ -764,14 +765,6 @@ msgstr ""
"La connexion a été déconnectée et ne peut plus être utilisée. Créez une " "La connexion a été déconnectée et ne peut plus être utilisée. Créez une "
"nouvelle connexion." "nouvelle connexion."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Fichier .mpy corrompu"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Code brut corrompu"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "Impossible d'initialiser Camera" msgstr "Impossible d'initialiser Camera"
@ -1339,7 +1332,8 @@ msgstr "Phase invalide"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Broche invalide" msgstr "Broche invalide"
@ -1725,6 +1719,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "Seulement une TouchAlarm peu être réglée en someil profond." msgstr "Seulement une TouchAlarm peu être réglée en someil profond."
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "Seulement une alarme alarm.time peut être réglée." msgstr "Seulement une alarme alarm.time peut être réglée."
@ -2666,10 +2661,6 @@ msgstr "il peut y avoir jusqu'à 4 paramètres pour l'assemblage Thumb"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "maximum 4 paramètres pour l'assembleur Xtensa" msgstr "maximum 4 paramètres pour l'assembleur Xtensa"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "ne peut sauvegarder que du bytecode"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3197,6 +3188,14 @@ msgstr "identifiant redéfini comme global"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "identifiant redéfini comme nonlocal" msgstr "identifiant redéfini comme nonlocal"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr "Fichier .mpy incompatible"
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr "architecture native .mpy incompatible"
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "format incomplet" msgstr "format incomplet"
@ -3317,6 +3316,10 @@ msgstr "interp est défini pour les matrices 1D de longueur égale"
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "interval doit être dans la portée %s-%s" msgstr "interval doit être dans la portée %s-%s"
#: py/compile.c
msgid "invalid architecture"
msgstr "architecture invalide"
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "arguments invalides" msgstr "arguments invalides"
@ -3326,10 +3329,6 @@ msgstr "arguments invalides"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "bits_per_pixel %d est invalid, doit être 1, 4, 8, 16, 24 ou 32" msgstr "bits_per_pixel %d est invalid, doit être 1, 4, 8, 16, 24 ou 32"
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "certificat invalide"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "décorateur invalide" msgstr "décorateur invalide"
@ -3360,10 +3359,6 @@ msgstr "spécification de format invalide"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "hostname incorrect" msgstr "hostname incorrect"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "clé invalide"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "décorateur micropython invalide" msgstr "décorateur micropython invalide"
@ -4384,6 +4379,21 @@ msgstr "zi doit être de type float"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "zi doit être de forme (n_section, 2)" msgstr "zi doit être de forme (n_section, 2)"
#~ msgid "Corrupt .mpy file"
#~ msgstr "Fichier .mpy corrompu"
#~ msgid "Corrupt raw code"
#~ msgstr "Code brut corrompu"
#~ msgid "can only save bytecode"
#~ msgstr "ne peut sauvegarder que du bytecode"
#~ msgid "invalid cert"
#~ msgstr "certificat invalide"
#~ msgid "invalid key"
#~ msgstr "clé invalide"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "" #~ msgstr ""
#~ "les fonctions de Viper ne supportent pas plus de 4 arguments actuellement" #~ "les fonctions de Viper ne supportent pas plus de 4 arguments actuellement"

View File

@ -681,6 +681,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -733,14 +734,6 @@ msgid ""
"connection." "connection."
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr ""
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "" msgstr ""
@ -1293,7 +1286,8 @@ msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "" msgstr ""
@ -1671,6 +1665,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2574,10 +2569,6 @@ msgstr ""
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr ""
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3090,6 +3081,14 @@ msgstr ""
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "" msgstr ""
@ -3209,6 +3208,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "" msgstr ""
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "" msgstr ""
@ -3218,10 +3221,6 @@ msgstr ""
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr ""
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3252,10 +3251,6 @@ msgstr ""
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr ""
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "" msgstr ""

View File

@ -698,6 +698,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -751,14 +752,6 @@ msgid ""
"connection." "connection."
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr ""
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "" msgstr ""
@ -1319,7 +1312,8 @@ msgstr "Fase non valida"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Pin non valido" msgstr "Pin non valido"
@ -1703,6 +1697,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2621,10 +2616,6 @@ msgstr "sono disponibili fino a 4 parametri per il Xtensa assembly"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "sono disponibili fino a 4 parametri per il Xtensa assembly" msgstr "sono disponibili fino a 4 parametri per il Xtensa assembly"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "È possibile salvare solo bytecode"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3144,6 +3135,14 @@ msgstr "identificatore ridefinito come globale"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "identificatore ridefinito come nonlocal" msgstr "identificatore ridefinito come nonlocal"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "formato incompleto" msgstr "formato incompleto"
@ -3263,6 +3262,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "" msgstr ""
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "argomenti non validi" msgstr "argomenti non validi"
@ -3272,10 +3275,6 @@ msgstr "argomenti non validi"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "certificato non valido"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3306,10 +3305,6 @@ msgstr "specificatore di formato non valido"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "chiave non valida"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "decoratore non valido in micropython" msgstr "decoratore non valido in micropython"
@ -4336,6 +4331,15 @@ msgstr ""
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "" msgstr ""
#~ msgid "can only save bytecode"
#~ msgstr "È possibile salvare solo bytecode"
#~ msgid "invalid cert"
#~ msgstr "certificato non valido"
#~ msgid "invalid key"
#~ msgstr "chiave non valida"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Le funzioni Viper non supportano più di 4 argomenti al momento" #~ msgstr "Le funzioni Viper non supportano più di 4 argomenti al momento"

View File

@ -690,6 +690,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "使用中のタイマー上では周波数を変えられません" msgstr "使用中のタイマー上では周波数を変えられません"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -744,14 +745,6 @@ msgid ""
"connection." "connection."
msgstr "接続は切断済みでもう使えません。新しい接続を作成してください" msgstr "接続は切断済みでもう使えません。新しい接続を作成してください"
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "破損した .mpy ファイル"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "破損したraw code"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "カメラを初期化できません" msgstr "カメラを初期化できません"
@ -1306,7 +1299,8 @@ msgstr "不正なphase"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "不正なピン" msgstr "不正なピン"
@ -1686,6 +1680,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2597,10 +2592,6 @@ msgstr ""
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr ""
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "サブクラス化済みのクラスに特殊メソッドを追加できません" msgstr "サブクラス化済みのクラスに特殊メソッドを追加できません"
@ -3117,6 +3108,14 @@ msgstr ""
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "" msgstr ""
@ -3237,6 +3236,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "intervalは%s-%sの範囲でなければなりません" msgstr "intervalは%s-%sの範囲でなければなりません"
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "不正な引数" msgstr "不正な引数"
@ -3246,10 +3249,6 @@ msgstr "不正な引数"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "不正な証明書"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3280,10 +3279,6 @@ msgstr ""
msgid "invalid hostname" msgid "invalid hostname"
msgstr "不正なホスト名" msgstr "不正なホスト名"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "不正な鍵"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "不正なmicropythonデコレータ" msgstr "不正なmicropythonデコレータ"
@ -4295,6 +4290,18 @@ msgstr "ziはfloat値でなければなりません"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "" msgstr ""
#~ msgid "Corrupt .mpy file"
#~ msgstr "破損した .mpy ファイル"
#~ msgid "Corrupt raw code"
#~ msgstr "破損したraw code"
#~ msgid "invalid cert"
#~ msgstr "不正な証明書"
#~ msgid "invalid key"
#~ msgstr "不正な鍵"
#~ msgid "parameter annotation must be an identifier" #~ msgid "parameter annotation must be an identifier"
#~ msgstr "引数アノテーションは識別子でなければなりません" #~ msgstr "引数アノテーションは識別子でなければなりません"

View File

@ -684,6 +684,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -736,14 +737,6 @@ msgid ""
"connection." "connection."
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr ""
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "" msgstr ""
@ -1296,7 +1289,8 @@ msgstr "단계가 잘못되었습니다"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "핀이 잘못되었습니다" msgstr "핀이 잘못되었습니다"
@ -1674,6 +1668,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2578,10 +2573,6 @@ msgstr ""
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr ""
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3094,6 +3085,14 @@ msgstr ""
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "" msgstr ""
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "" msgstr ""
@ -3213,6 +3212,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "" msgstr ""
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "" msgstr ""
@ -3222,10 +3225,6 @@ msgstr ""
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "cert가 유효하지 않습니다"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3256,10 +3255,6 @@ msgstr "형식 지정자(format specifier)가 유효하지 않습니다"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "키가 유효하지 않습니다"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "" msgstr ""
@ -4268,6 +4263,12 @@ msgstr ""
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "" msgstr ""
#~ msgid "invalid cert"
#~ msgstr "cert가 유효하지 않습니다"
#~ msgid "invalid key"
#~ msgstr "키가 유효하지 않습니다"
#~ msgid "bits must be 7, 8 or 9" #~ msgid "bits must be 7, 8 or 9"
#~ msgstr "비트(bits)는 7, 8 또는 9 여야합니다" #~ msgstr "비트(bits)는 7, 8 또는 9 여야합니다"

View File

@ -688,6 +688,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Kan de frequentie van een timer die al in gebruik is niet variëren" msgstr "Kan de frequentie van een timer die al in gebruik is niet variëren"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -744,14 +745,6 @@ msgstr ""
"Verbinding is verbroken en kan niet langer gebruikt worden. Creëer een " "Verbinding is verbroken en kan niet langer gebruikt worden. Creëer een "
"nieuwe verbinding." "nieuwe verbinding."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Corrupt .mpy bestand"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Corrupt raw code"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "Kon camera niet initialiseren" msgstr "Kon camera niet initialiseren"
@ -1307,7 +1300,8 @@ msgstr "Ongeldige fase"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Ongeldige pin" msgstr "Ongeldige pin"
@ -1691,6 +1685,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "Slechts één alarm.time alarm kan worden ingesteld." msgstr "Slechts één alarm.time alarm kan worden ingesteld."
@ -2625,10 +2620,6 @@ msgstr "kan slechts 4 parameters aan Thumb assembly geven"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "kan slechts 4 parameters aan Xtensa assembly geven" msgstr "kan slechts 4 parameters aan Xtensa assembly geven"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "kan alleen byte-code opslaan"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "" msgstr ""
@ -3146,6 +3137,14 @@ msgstr "identifier is opnieuw gedefinieerd als global"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "identifier is opnieuw gedefinieerd als nonlocal" msgstr "identifier is opnieuw gedefinieerd als nonlocal"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "incompleet formaat" msgstr "incompleet formaat"
@ -3265,6 +3264,10 @@ msgstr "interp is gedefinieerd voor eendimensionale arrays van gelijke lengte"
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "interval moet binnen bereik %s-%s vallen" msgstr "interval moet binnen bereik %s-%s vallen"
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "ongeldige argumenten" msgstr "ongeldige argumenten"
@ -3274,10 +3277,6 @@ msgstr "ongeldige argumenten"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "ongeldig certificaat"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3308,10 +3307,6 @@ msgstr "ongeldige formaatspecificatie"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "onjuiste hostnaam" msgstr "onjuiste hostnaam"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "ongeldige sleutel"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "ongeldige micropython decorator" msgstr "ongeldige micropython decorator"
@ -4326,6 +4321,21 @@ msgstr "zi moet van type float zijn"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "zi moet vorm (n_section, 2) hebben" msgstr "zi moet vorm (n_section, 2) hebben"
#~ msgid "Corrupt .mpy file"
#~ msgstr "Corrupt .mpy bestand"
#~ msgid "Corrupt raw code"
#~ msgstr "Corrupt raw code"
#~ msgid "can only save bytecode"
#~ msgstr "kan alleen byte-code opslaan"
#~ msgid "invalid cert"
#~ msgstr "ongeldig certificaat"
#~ msgid "invalid key"
#~ msgstr "ongeldige sleutel"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Viper-functies ondersteunen momenteel niet meer dan 4 argumenten" #~ msgstr "Viper-functies ondersteunen momenteel niet meer dan 4 argumenten"

View File

@ -688,6 +688,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Nie można zmieniać częstotliwości timera, który jest już używany" msgstr "Nie można zmieniać częstotliwości timera, który jest już używany"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "" msgstr ""
@ -744,14 +745,6 @@ msgstr ""
"Połączenie zostało rozłączone i nie można go już używać. Utwórz nowe " "Połączenie zostało rozłączone i nie można go już używać. Utwórz nowe "
"połączenie." "połączenie."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Uszkodzony plik .mpy"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "" msgstr ""
@ -1306,7 +1299,8 @@ msgstr "Zła faza"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Zła nóżka" msgstr "Zła nóżka"
@ -1684,6 +1678,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "" msgstr ""
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "" msgstr ""
@ -2593,10 +2588,6 @@ msgstr "asembler Thumb może przyjąć do 4 parameterów"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "asembler Xtensa może przyjąć do 4 parameterów" msgstr "asembler Xtensa może przyjąć do 4 parameterów"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "można zapisać tylko bytecode"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "nie można dodać specjalnej metody do podklasy" msgstr "nie można dodać specjalnej metody do podklasy"
@ -3110,6 +3101,14 @@ msgstr "nazwa przedefiniowana jako globalna"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "nazwa przedefiniowana jako nielokalna" msgstr "nazwa przedefiniowana jako nielokalna"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "niepełny format" msgstr "niepełny format"
@ -3229,6 +3228,10 @@ msgstr ""
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "interwał musi mieścić się w zakresie %s-%s" msgstr "interwał musi mieścić się w zakresie %s-%s"
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "złe arguemnty" msgstr "złe arguemnty"
@ -3238,10 +3241,6 @@ msgstr "złe arguemnty"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "zły ceryfikat"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "" msgstr ""
@ -3272,10 +3271,6 @@ msgstr "zła specyfikacja formatu"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "" msgstr ""
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "zły klucz"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "zły dekorator micropythona" msgstr "zły dekorator micropythona"
@ -4286,6 +4281,18 @@ msgstr ""
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "" msgstr ""
#~ msgid "Corrupt .mpy file"
#~ msgstr "Uszkodzony plik .mpy"
#~ msgid "can only save bytecode"
#~ msgstr "można zapisać tylko bytecode"
#~ msgid "invalid cert"
#~ msgstr "zły ceryfikat"
#~ msgid "invalid key"
#~ msgstr "zły klucz"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Funkcje Viper nie obsługują obecnie więcej niż 4 argumentów" #~ msgstr "Funkcje Viper nie obsługują obecnie więcej niż 4 argumentów"

View File

@ -6,7 +6,7 @@ msgstr ""
"Project-Id-Version: PACKAGE VERSION\n" "Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-01-04 12:55-0600\n" "POT-Creation-Date: 2021-01-04 12:55-0600\n"
"PO-Revision-Date: 2021-04-25 18:43+0000\n" "PO-Revision-Date: 2021-04-28 16:11+0000\n"
"Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n" "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
"Language-Team: \n" "Language-Team: \n"
"Language: pt_BR\n" "Language: pt_BR\n"
@ -705,6 +705,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Não é possível variar a frequência em um timer que já esteja em uso" msgstr "Não é possível variar a frequência em um timer que já esteja em uso"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "Não é possível acordar (wake) no pino edge. Nível apenas." msgstr "Não é possível acordar (wake) no pino edge. Nível apenas."
@ -761,14 +762,6 @@ msgid ""
msgstr "" msgstr ""
"A conexão foi desconectada e não pode mais ser usada. Crie uma nova conexão." "A conexão foi desconectada e não pode mais ser usada. Crie uma nova conexão."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Arquivo .mpy corrompido"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Código bruto corrompido"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "Não foi possível inicializar a Câmera" msgstr "Não foi possível inicializar a Câmera"
@ -1330,7 +1323,8 @@ msgstr "Fase Inválida"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Pino inválido" msgstr "Pino inválido"
@ -1715,6 +1709,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "Apenas um TouchAlarm pode ser colocado em deep sleep." msgstr "Apenas um TouchAlarm pode ser colocado em deep sleep."
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "Apenas um alarme alarm.time pode ser definido." msgstr "Apenas um alarme alarm.time pode ser definido."
@ -2658,10 +2653,6 @@ msgstr "só pode haver até 4 parâmetros para a montagem Thumb"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "só pode haver até 4 parâmetros para a montagem Xtensa" msgstr "só pode haver até 4 parâmetros para a montagem Xtensa"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "apenas o bytecode pode ser salvo"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "não é possível adicionar o método especial à classe já subclassificada" msgstr "não é possível adicionar o método especial à classe já subclassificada"
@ -3183,6 +3174,14 @@ msgstr "o identificador foi redefinido como global"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "o identificador foi redefinido como não-local" msgstr "o identificador foi redefinido como não-local"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr "arquivo .mpy incompatível"
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr "arquivo .mpy com arquitetura nativa incompatível"
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "formato incompleto" msgstr "formato incompleto"
@ -3303,6 +3302,10 @@ msgstr "o interp é definido para matrizes 1D de igual comprimento"
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "o intervalo deve estar entre %s-%s" msgstr "o intervalo deve estar entre %s-%s"
#: py/compile.c
msgid "invalid architecture"
msgstr "arquitetura inválida"
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "argumentos inválidos" msgstr "argumentos inválidos"
@ -3312,10 +3315,6 @@ msgstr "argumentos inválidos"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "bits_per_pixel %d é inválido, deve ser, 1, 4, 8, 16, 24, ou 32" msgstr "bits_per_pixel %d é inválido, deve ser, 1, 4, 8, 16, 24, ou 32"
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "certificado inválido"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "decorador inválido" msgstr "decorador inválido"
@ -3346,10 +3345,6 @@ msgstr "o especificador do formato é inválido"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "o nome do host é inválido" msgstr "o nome do host é inválido"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "chave inválida"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "o decorador micropython é inválido" msgstr "o decorador micropython é inválido"
@ -4370,6 +4365,21 @@ msgstr "zi deve ser de um tipo float"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "zi deve estar na forma (n_section, 2)" msgstr "zi deve estar na forma (n_section, 2)"
#~ msgid "Corrupt .mpy file"
#~ msgstr "Arquivo .mpy corrompido"
#~ msgid "Corrupt raw code"
#~ msgstr "Código bruto corrompido"
#~ msgid "can only save bytecode"
#~ msgstr "apenas o bytecode pode ser salvo"
#~ msgid "invalid cert"
#~ msgstr "certificado inválido"
#~ msgid "invalid key"
#~ msgstr "chave inválida"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Atualmente, as funções do Viper não suportam mais de 4 argumentos" #~ msgstr "Atualmente, as funções do Viper não suportam mais de 4 argumentos"

View File

@ -6,7 +6,7 @@ msgstr ""
"Project-Id-Version: PACKAGE VERSION\n" "Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n" "Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-01-04 12:55-0600\n" "POT-Creation-Date: 2021-01-04 12:55-0600\n"
"PO-Revision-Date: 2021-04-24 14:29+0000\n" "PO-Revision-Date: 2021-04-28 16:11+0000\n"
"Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n" "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
"Language-Team: LANGUAGE <LL@li.org>\n" "Language-Team: LANGUAGE <LL@li.org>\n"
"Language: sv\n" "Language: sv\n"
@ -694,6 +694,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Det går inte att ändra frekvensen på en timer som redan används" msgstr "Det går inte att ändra frekvensen på en timer som redan används"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "Kan inte vakna på nivåskift, enbart nivå." msgstr "Kan inte vakna på nivåskift, enbart nivå."
@ -750,14 +751,6 @@ msgstr ""
"Anslutningen har kopplats bort och kan inte längre användas. Skapa en ny " "Anslutningen har kopplats bort och kan inte längre användas. Skapa en ny "
"anslutning." "anslutning."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Skadad .mpy-fil"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Korrupt rå kod"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "Kunde inte initiera Camera" msgstr "Kunde inte initiera Camera"
@ -1314,7 +1307,8 @@ msgstr "Ogiltig fas"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Ogiltig pinne" msgstr "Ogiltig pinne"
@ -1698,6 +1692,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "Endast ett TouchAlarm kan ställas in för djupsömn." msgstr "Endast ett TouchAlarm kan ställas in för djupsömn."
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "Endast ett alarm.time kan ställas in." msgstr "Endast ett alarm.time kan ställas in."
@ -2628,10 +2623,6 @@ msgstr "kan bara ha upp till 4 parametrar för Thumbs assembly"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "kan bara ha upp till 4 parametrar att Xtensa assembly" msgstr "kan bara ha upp till 4 parametrar att Xtensa assembly"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "kan bara spara bytecode"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "kan inte lägga till särskild metod för redan subklassad klass" msgstr "kan inte lägga till särskild metod för redan subklassad klass"
@ -3149,6 +3140,14 @@ msgstr "identifieraren omdefinierad till global"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "identifieraren omdefinierad som icke-lokal" msgstr "identifieraren omdefinierad som icke-lokal"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr "inkompatibel .mpy-fil"
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr "inkompatibel nativ .mpy-arkitektur"
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "ofullständigt format" msgstr "ofullständigt format"
@ -3268,6 +3267,10 @@ msgstr "interp är definierad för 1D-matriser med samma längd"
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "interval måste vara i intervallet %s-%s" msgstr "interval måste vara i intervallet %s-%s"
#: py/compile.c
msgid "invalid architecture"
msgstr "ogiltig arkitektur"
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "ogiltiga argument" msgstr "ogiltiga argument"
@ -3277,10 +3280,6 @@ msgstr "ogiltiga argument"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "ogiltig bits_per_pixel %d, måste vara 1, 4, 8, 16, 24 eller 32" msgstr "ogiltig bits_per_pixel %d, måste vara 1, 4, 8, 16, 24 eller 32"
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "ogiltigt certifikat"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "ogiltig dekorator" msgstr "ogiltig dekorator"
@ -3311,10 +3310,6 @@ msgstr "ogiltig formatspecificerare"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "Ogiltigt värdnamn" msgstr "Ogiltigt värdnamn"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "ogiltig nyckel"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "ogiltig mikropython-dekorator" msgstr "ogiltig mikropython-dekorator"
@ -4329,6 +4324,21 @@ msgstr "zi måste vara av typ float"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "zi måste vara i formen (n_section, 2)" msgstr "zi måste vara i formen (n_section, 2)"
#~ msgid "Corrupt .mpy file"
#~ msgstr "Skadad .mpy-fil"
#~ msgid "Corrupt raw code"
#~ msgstr "Korrupt rå kod"
#~ msgid "can only save bytecode"
#~ msgstr "kan bara spara bytecode"
#~ msgid "invalid cert"
#~ msgstr "ogiltigt certifikat"
#~ msgid "invalid key"
#~ msgstr "ogiltig nyckel"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Viper-funktioner stöder för närvarande inte mer än fyra argument" #~ msgstr "Viper-funktioner stöder för närvarande inte mer än fyra argument"

View File

@ -695,6 +695,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Wúfǎ gēnggǎi yǐ zài shǐyòng de jìshí qì shàng de pínlǜ" msgstr "Wúfǎ gēnggǎi yǐ zài shǐyòng de jìshí qì shàng de pínlǜ"
#: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level." msgid "Cannot wake on pin edge. Only level."
msgstr "wú fǎ zài yǐn jiǎo biān yuán huàn xǐng. jǐn jí bié." msgstr "wú fǎ zài yǐn jiǎo biān yuán huàn xǐng. jǐn jí bié."
@ -749,14 +750,6 @@ msgid ""
"connection." "connection."
msgstr "Liánjiē yǐ duàn kāi, wúfǎ zài shǐyòng. Chuàngjiàn yīgè xīn de liánjiē." msgstr "Liánjiē yǐ duàn kāi, wúfǎ zài shǐyòng. Chuàngjiàn yīgè xīn de liánjiē."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Fǔbài de .mpy wénjiàn"
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Sǔnhuài de yuánshǐ dàimǎ"
#: ports/cxd56/common-hal/camera/Camera.c #: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera" msgid "Could not initialize Camera"
msgstr "Wúfǎ chūshǐhuà xiàngjī" msgstr "Wúfǎ chūshǐhuà xiàngjī"
@ -1316,7 +1309,8 @@ msgstr "Jiēduàn wúxiào"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: ports/esp32s2/common-hal/touchio/TouchIn.c
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c #: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin" msgid "Invalid pin"
msgstr "Wúxiào de yǐn jiǎo" msgstr "Wúxiào de yǐn jiǎo"
@ -1700,6 +1694,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
msgstr "zhǐ yǒu yí gè chù mō bì kě yǐ shè zhì zài shēn dù shuì mián." msgstr "zhǐ yǒu yí gè chù mō bì kě yǐ shè zhì zài shēn dù shuì mián."
#: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set." msgid "Only one alarm.time alarm can be set."
msgstr "zhǐ néng shè zhì yí gè bào jǐng." msgstr "zhǐ néng shè zhì yí gè bào jǐng."
@ -2626,10 +2621,6 @@ msgstr "zhǐyǒu Thumb zǔjiàn zuìduō 4 cānshù"
msgid "can only have up to 4 parameters to Xtensa assembly" msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "zhǐyǒu Xtensa zǔjiàn zuìduō 4 cānshù" msgstr "zhǐyǒu Xtensa zǔjiàn zuìduō 4 cānshù"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "zhǐ néng bǎocún zì jié mǎ jìlù"
#: py/objtype.c #: py/objtype.c
msgid "can't add special method to already-subclassed class" msgid "can't add special method to already-subclassed class"
msgstr "wúfǎ tiānjiā tèshū fāngfǎ dào zi fēnlèi lèi" msgstr "wúfǎ tiānjiā tèshū fāngfǎ dào zi fēnlèi lèi"
@ -3148,6 +3139,14 @@ msgstr "biāozhì fú chóngxīn dìngyì wèi quánjú"
msgid "identifier redefined as nonlocal" msgid "identifier redefined as nonlocal"
msgstr "biāozhì fú chóngxīn dìngyì wéi fēi běndì" msgstr "biāozhì fú chóngxīn dìngyì wéi fēi běndì"
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c #: py/objstr.c
msgid "incomplete format" msgid "incomplete format"
msgstr "géshì bù wánzhěng" msgstr "géshì bù wánzhěng"
@ -3267,6 +3266,10 @@ msgstr "interp shì wèi děng zhǎng de 1D shùzǔ dìngyì de"
msgid "interval must be in range %s-%s" msgid "interval must be in range %s-%s"
msgstr "Jiàngé bìxū zài %s-%s fànwéi nèi" msgstr "Jiàngé bìxū zài %s-%s fànwéi nèi"
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: lib/netutils/netutils.c #: lib/netutils/netutils.c
msgid "invalid arguments" msgid "invalid arguments"
msgstr "wúxiào de cānshù" msgstr "wúxiào de cānshù"
@ -3276,10 +3279,6 @@ msgstr "wúxiào de cānshù"
msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
msgstr "wú xiào bits_per_pixel %d bì xū shì, 1, 4, 8, 16, 24, huò 32" msgstr "wú xiào bits_per_pixel %d bì xū shì, 1, 4, 8, 16, 24, huò 32"
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "zhèngshū wúxiào"
#: py/compile.c #: py/compile.c
msgid "invalid decorator" msgid "invalid decorator"
msgstr "wú xiào zhuāng shì" msgstr "wú xiào zhuāng shì"
@ -3310,10 +3309,6 @@ msgstr "wúxiào de géshì biāozhù"
msgid "invalid hostname" msgid "invalid hostname"
msgstr "wú xiào zhǔ jī míng" msgstr "wú xiào zhǔ jī míng"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "wúxiào de mì yào"
#: py/compile.c #: py/compile.c
msgid "invalid micropython decorator" msgid "invalid micropython decorator"
msgstr "wúxiào de MicroPython zhuāngshì qì" msgstr "wúxiào de MicroPython zhuāngshì qì"
@ -4325,6 +4320,21 @@ msgstr "zi bìxū wèi fú diǎn xíng"
msgid "zi must be of shape (n_section, 2)" msgid "zi must be of shape (n_section, 2)"
msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
#~ msgid "Corrupt .mpy file"
#~ msgstr "Fǔbài de .mpy wénjiàn"
#~ msgid "Corrupt raw code"
#~ msgstr "Sǔnhuài de yuánshǐ dàimǎ"
#~ msgid "can only save bytecode"
#~ msgstr "zhǐ néng bǎocún zì jié mǎ jìlù"
#~ msgid "invalid cert"
#~ msgstr "zhèngshū wúxiào"
#~ msgid "invalid key"
#~ msgstr "wúxiào de mì yào"
#~ msgid "Viper functions don't currently support more than 4 arguments" #~ msgid "Viper functions don't currently support more than 4 arguments"
#~ msgstr "Viper hánshù mùqián bù zhīchí chāoguò 4 gè cānshù" #~ msgstr "Viper hánshù mùqián bù zhīchí chāoguò 4 gè cānshù"

1
main.c
View File

@ -427,6 +427,7 @@ STATIC bool run_code_py(safe_mode_t safe_mode) {
// it may also return due to another interrupt, that's why we check // it may also return due to another interrupt, that's why we check
// for deep sleep alarms above. If it wasn't a deep sleep alarm, // for deep sleep alarms above. If it wasn't a deep sleep alarm,
// then we'll idle here again. // then we'll idle here again.
#if CIRCUITPY_ALARM #if CIRCUITPY_ALARM
common_hal_alarm_pretending_deep_sleep(); common_hal_alarm_pretending_deep_sleep();
#else #else

View File

@ -94,6 +94,11 @@ else
CFLAGS += -flto -flto-partition=none CFLAGS += -flto -flto-partition=none
endif endif
ifeq ($(NRF_DEBUG_PRINT), 1)
CFLAGS += -DNRF_DEBUG_PRINT=1
SRC_SUPERVISOR += supervisor/debug_uart.c
endif
# option to override compiler optimization level, set in boards/$(BOARD)/mpconfigboard.mk # option to override compiler optimization level, set in boards/$(BOARD)/mpconfigboard.mk
CFLAGS += $(OPTIMIZATION_FLAGS) CFLAGS += $(OPTIMIZATION_FLAGS)

View File

@ -7,6 +7,7 @@ MCU_CHIP = nrf52833
INTERNAL_FLASH_FILESYSTEM = 1 INTERNAL_FLASH_FILESYSTEM = 1
CIRCUITPY_ALARM = 0
CIRCUITPY_AUDIOMP3 = 0 CIRCUITPY_AUDIOMP3 = 0
CIRCUITPY_BITBANGIO = 0 CIRCUITPY_BITBANGIO = 0
CIRCUITPY_BITMAPTOOLS = 0 CIRCUITPY_BITMAPTOOLS = 0

View File

@ -10,6 +10,7 @@ MCU_CHIP = nrf52833
INTERNAL_FLASH_FILESYSTEM = 1 INTERNAL_FLASH_FILESYSTEM = 1
CIRCUITPY_ALARM = 0
CIRCUITPY_AESIO = 1 CIRCUITPY_AESIO = 1
CIRCUITPY_AUDIOMP3 = 0 CIRCUITPY_AUDIOMP3 = 0
CIRCUITPY_BITMAPTOOLS = 0 CIRCUITPY_BITMAPTOOLS = 0
@ -24,6 +25,8 @@ CIRCUITPY_MSGPACK = 0
CIRCUITPY_NEOPIXEL_WRITE = 0 CIRCUITPY_NEOPIXEL_WRITE = 0
CIRCUITPY_NVM = 0 CIRCUITPY_NVM = 0
CIRCUITPY_PIXELBUF = 0 CIRCUITPY_PIXELBUF = 0
CIRCUITPY_PULSEIO = 0
CIRCUITPY_PWMIO = 1
CIRCUITPY_RGBMATRIX = 0 CIRCUITPY_RGBMATRIX = 0
CIRCUITPY_ROTARYIO = 0 CIRCUITPY_ROTARYIO = 0
CIRCUITPY_RTC = 1 CIRCUITPY_RTC = 1

View File

@ -0,0 +1,118 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Junji Sakai
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <string.h>
#include "py/runtime.h"
#include "common-hal/alarm/__init__.h"
#include "common-hal/alarm/SleepMemory.h"
#include "nrf_power.h"
#ifdef NRF_DEBUG_PRINT
extern void dbg_dump_RAMreg(void);
#include "supervisor/serial.h" // dbg_printf()
#endif
__attribute__((section(".uninitialized"))) static uint8_t _sleepmem[SLEEP_MEMORY_LENGTH];
__attribute__((section(".uninitialized"))) uint8_t sleepmem_wakeup_event;
__attribute__((section(".uninitialized"))) uint8_t sleepmem_wakeup_pin;
__attribute__((section(".uninitialized"))) static uint32_t _sleepmem_magicnum;
#define SLEEP_MEMORY_DATA_GUARD 0xad0000af
#define SLEEP_MEMORY_DATA_GUARD_MASK 0xff0000ff
static int is_sleep_memory_valid(void) {
if ((_sleepmem_magicnum & SLEEP_MEMORY_DATA_GUARD_MASK)
== SLEEP_MEMORY_DATA_GUARD) {
return 1;
}
return 0;
}
void set_memory_retention(void) {
// set RAM[n].POWER register for RAM retention
// nRF52840 has RAM[0..7].Section[0..1] and RAM[8].Section[0..5]
// nRF52833 has RAM[0..7].Section[0..1] and RAM[8].Section[0,1]
for(int block = 0; block <= 7; ++block) {
nrf_power_rampower_mask_on(NRF_POWER, block,
NRF_POWER_RAMPOWER_S0RETENTION_MASK |
NRF_POWER_RAMPOWER_S1RETENTION_MASK);
};
#ifdef NRF52840
nrf_power_rampower_mask_on(NRF_POWER, 8,
NRF_POWER_RAMPOWER_S0RETENTION_MASK |
NRF_POWER_RAMPOWER_S1RETENTION_MASK |
NRF_POWER_RAMPOWER_S2RETENTION_MASK |
NRF_POWER_RAMPOWER_S3RETENTION_MASK |
NRF_POWER_RAMPOWER_S4RETENTION_MASK |
NRF_POWER_RAMPOWER_S5RETENTION_MASK);
#endif
#ifdef NRF52833
nrf_power_rampower_mask_on(NRF_POWER, 8,
NRF_POWER_RAMPOWER_S0RETENTION_MASK |
NRF_POWER_RAMPOWER_S1RETENTION_MASK);
#endif
}
static void initialize_sleep_memory(void) {
memset((uint8_t *)_sleepmem, 0, SLEEP_MEMORY_LENGTH);
sleepmem_wakeup_event = 0;
sleepmem_wakeup_pin = 0;
set_memory_retention();
#ifdef NRF_DEBUG_PRINT
//dbg_dump_RAMreg();
#endif
_sleepmem_magicnum = SLEEP_MEMORY_DATA_GUARD;
}
void alarm_sleep_memory_reset(void) {
if (!is_sleep_memory_valid()) {
initialize_sleep_memory();
#ifdef NRF_DEBUG_PRINT
dbg_printf("sleep memory initialized\r\n");
#endif
}
}
uint32_t common_hal_alarm_sleep_memory_get_length(alarm_sleep_memory_obj_t *self) {
return sizeof(_sleepmem);
}
bool common_hal_alarm_sleep_memory_set_bytes(alarm_sleep_memory_obj_t *self, uint32_t start_index, const uint8_t* values, uint32_t len) {
if (start_index + len > sizeof(_sleepmem)) {
return false;
}
memcpy((uint8_t *) (_sleepmem + start_index), values, len);
return true;
}
void common_hal_alarm_sleep_memory_get_bytes(alarm_sleep_memory_obj_t *self, uint32_t start_index, uint8_t* values, uint32_t len) {
if (start_index + len > sizeof(_sleepmem)) {
return;
}
memcpy(values, (uint8_t *) (_sleepmem + start_index), len);
}

View File

@ -0,0 +1,41 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Junji Sakai
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM_SLEEPMEMORY_H
#define MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM_SLEEPMEMORY_H
#include "py/obj.h"
#define SLEEP_MEMORY_LENGTH (256)
typedef struct {
mp_obj_base_t base;
} alarm_sleep_memory_obj_t;
extern void set_memory_retention(void);
extern void alarm_sleep_memory_reset(void);
#endif // MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM_SLEEPMEMORY_H

View File

@ -0,0 +1,349 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
* Copyright (c) 2020 Dan Halbert for Adafruit Industries
* Copyright (c) 2021 Junji Sakai
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/gc.h"
#include "py/obj.h"
#include "py/objtuple.h"
#include "py/runtime.h"
#include <stdio.h>
#include <string.h>
#include "shared-bindings/alarm/__init__.h"
#include "shared-bindings/alarm/SleepMemory.h"
#include "shared-bindings/alarm/pin/PinAlarm.h"
#include "shared-bindings/alarm/time/TimeAlarm.h"
#include "shared-bindings/alarm/touch/TouchAlarm.h"
#include "shared-bindings/time/__init__.h"
#include "supervisor/port.h"
#include "supervisor/serial.h" // serial_connected()
#ifdef NRF_DEBUG_PRINT
#include "supervisor/serial.h" // dbg_printf()
extern int dbg_check_RTCprescaler(void);
#endif
#include "supervisor/qspi_flash.h"
#include "nrf.h"
#include "nrf_power.h"
#include "nrfx.h"
#include "nrfx_gpiote.h"
// Singleton instance of SleepMemory.
const alarm_sleep_memory_obj_t alarm_sleep_memory_obj = {
.base = {
.type = &alarm_sleep_memory_type,
},
};
void alarm_reset(void) {
alarm_sleep_memory_reset();
alarm_pin_pinalarm_reset();
alarm_time_timealarm_reset();
alarm_touch_touchalarm_reset();
}
extern uint32_t reset_reason_saved;
STATIC nrf_sleep_source_t _get_wakeup_cause(void) {
if (alarm_pin_pinalarm_woke_us_up()) {
return NRF_SLEEP_WAKEUP_GPIO;
}
if (alarm_time_timealarm_woke_us_up()) {
return NRF_SLEEP_WAKEUP_TIMER;
}
if (alarm_touch_touchalarm_woke_us_up()) {
return NRF_SLEEP_WAKEUP_TOUCHPAD;
}
if (reset_reason_saved & NRF_POWER_RESETREAS_RESETPIN_MASK) {
return NRF_SLEEP_WAKEUP_RESETPIN;
}
else if (reset_reason_saved & NRF_POWER_RESETREAS_OFF_MASK) {
return NRF_SLEEP_WAKEUP_GPIO;
}
else if (reset_reason_saved & NRF_POWER_RESETREAS_VBUS_MASK) {
return NRF_SLEEP_WAKEUP_VBUS;
}
return NRF_SLEEP_WAKEUP_UNDEFINED;
}
#ifdef NRF_DEBUG_PRINT
static const char* cause_str[] = {
"UNDEFINED",
"GPIO",
"TIMER",
"TOUCHPAD",
"VBUS",
"RESETPIN",
};
void print_wakeup_cause(nrf_sleep_source_t cause) {
if (cause >= 0 && cause < NRF_SLEEP_WAKEUP_ZZZ) {
dbg_printf("wakeup cause = NRF_SLEEP_WAKEUP_%s\r\n",
cause_str[(int)cause]);
}
}
#endif
bool common_hal_alarm_woken_from_sleep(void) {
nrf_sleep_source_t cause = _get_wakeup_cause();
#ifdef NRF_DEBUG_PRINT
if (cause != NRF_SLEEP_WAKEUP_UNDEFINED) {
//print_wakeup_cause(cause);
}
#endif
return (cause == NRF_SLEEP_WAKEUP_GPIO || cause == NRF_SLEEP_WAKEUP_TIMER
|| cause == NRF_SLEEP_WAKEUP_TOUCHPAD);
}
STATIC mp_obj_t _get_wake_alarm(size_t n_alarms, const mp_obj_t *alarms) {
nrf_sleep_source_t cause = _get_wakeup_cause();
switch (cause) {
case NRF_SLEEP_WAKEUP_TIMER: {
return alarm_time_timealarm_get_wakeup_alarm(n_alarms, alarms);
}
case NRF_SLEEP_WAKEUP_TOUCHPAD: {
return alarm_touch_touchalarm_get_wakeup_alarm(n_alarms, alarms);
}
case NRF_SLEEP_WAKEUP_GPIO: {
return alarm_pin_pinalarm_get_wakeup_alarm(n_alarms, alarms);
}
default:
break;
}
return mp_const_none;
}
mp_obj_t common_hal_alarm_get_wake_alarm(void) {
mp_obj_t obj = _get_wake_alarm(0, NULL);
return obj;
}
// Set up light sleep or deep sleep alarms.
STATIC void _setup_sleep_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms) {
alarm_pin_pinalarm_set_alarms(deep_sleep, n_alarms, alarms);
alarm_time_timealarm_set_alarms(deep_sleep, n_alarms, alarms);
alarm_touch_touchalarm_set_alarm(deep_sleep, n_alarms, alarms);
}
// TODO: this handles all possible types of wakeup, which is redundant with main.
// revise to extract all parts essential to enabling sleep wakeup, but leave the
// alarm/non-alarm sorting to the existing main loop.
void system_on_idle_until_alarm(int64_t timediff_ms, uint32_t prescaler) {
bool have_timeout = false;
uint64_t start_tick = 0, end_tick = 0;
int64_t tickdiff;
#if defined(MICROPY_QSPI_CS)
qspi_flash_enter_sleep();
#endif
if (timediff_ms != -1) {
have_timeout = true;
#if 0
int64_t now = common_hal_time_monotonic_ms();
dbg_printf("now_ms=%ld timediff_ms=%ld\r\n", (long)now, (long)timediff_ms);
#endif
if (timediff_ms < 0) timediff_ms = 0;
if (prescaler == 0) {
// 1 tick = 1/1024 sec = 1000/1024 ms
// -> 1 ms = 1024/1000 ticks
tickdiff = (mp_uint_t)(timediff_ms * 1024 / 1000); // ms -> ticks
}
else {
// 1 tick = prescaler/1024 sec = prescaler*1000/1024 ms
// -> 1ms = 1024/(1000*prescaler) ticks
tickdiff = (mp_uint_t)(timediff_ms * 1024 / (1000 * prescaler));
}
start_tick = port_get_raw_ticks(NULL);
end_tick = start_tick + tickdiff;
}
#if 0
dbg_printf("start_tick=%ld end_tick=%ld have_timeout=%c\r\n", (long)start_tick, (long)end_tick, have_timeout ? 'T' : 'F');
#endif
int64_t remaining;
sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_NONE;
sleepmem_wakeup_pin = WAKEUP_PIN_UNDEF;
#ifdef NRF_DEBUG_PRINT
int ct = 40;
char reason = '?';
#define WAKEUP_REASON(x) reason = (x)
#else
#define WAKEUP_REASON(x)
#endif
while(1) {
if (mp_hal_is_interrupted()) {
WAKEUP_REASON('I');
break;
}
if (serial_connected() && serial_bytes_available()) {
WAKEUP_REASON('S');
break;
}
RUN_BACKGROUND_TASKS;
if (common_hal_alarm_woken_from_sleep()) {
WAKEUP_REASON('W');
break;
}
if (have_timeout) {
remaining = end_tick - port_get_raw_ticks(NULL);
// We break a bit early so we don't risk setting the alarm before the time when we call
// sleep.
if (remaining < 1) {
WAKEUP_REASON('t');
break;
}
port_interrupt_after_ticks(remaining);
}
// Idle until an interrupt happens.
port_idle_until_interrupt();
#ifdef NRF_DEBUG_PRINT
if (ct > 0) {
dbg_printf("_");
--ct;
}
#endif
if (have_timeout) {
remaining = end_tick - port_get_raw_ticks(NULL);
if (remaining <= 0) {
sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_TIMER;
WAKEUP_REASON('T');
break;
}
}
}
#ifdef NRF_DEBUG_PRINT
dbg_printf("%c\r\n", reason);
#endif
#if defined(MICROPY_QSPI_CS)
qspi_flash_exit_sleep();
#endif
#ifdef NRF_DEBUG_PRINT
tickdiff = port_get_raw_ticks(NULL) - start_tick;
double sec;
if (prescaler == 0) {
sec = (double)tickdiff / 1024;
}
else {
sec = (double)(tickdiff * prescaler) / 1024;
}
dbg_printf("lapse %6.1f sec\r\n", sec);
#endif
}
mp_obj_t common_hal_alarm_light_sleep_until_alarms(size_t n_alarms, const mp_obj_t *alarms) {
mp_obj_t wake_alarm;
alarm_time_timealarm_clear_wakeup_time();
_setup_sleep_alarms(false, n_alarms, alarms);
#ifdef NRF_DEBUG_PRINT
dbg_printf("\r\nlight sleep...");
#endif
int64_t timediff_ms = alarm_time_timealarm_get_wakeup_timediff_ms();
system_on_idle_until_alarm(timediff_ms, 0);
if (mp_hal_is_interrupted()) {
wake_alarm = mp_const_none;
}
else {
wake_alarm = _get_wake_alarm(n_alarms, alarms);
}
alarm_reset();
return wake_alarm;
}
void common_hal_alarm_set_deep_sleep_alarms(size_t n_alarms, const mp_obj_t *alarms) {
alarm_time_timealarm_clear_wakeup_time();
_setup_sleep_alarms(true, n_alarms, alarms);
}
#define PRESCALER_VALUE_IN_DEEP_SLEEP (1024)
void NORETURN common_hal_alarm_enter_deep_sleep(void) {
alarm_pin_pinalarm_prepare_for_deep_sleep();
alarm_time_timealarm_prepare_for_deep_sleep();
#ifdef NRF_DEBUG_PRINT
dbg_printf("\r\ndeep sleep...");
#endif
int64_t timediff_ms = alarm_time_timealarm_get_wakeup_timediff_ms();
tick_set_prescaler(PRESCALER_VALUE_IN_DEEP_SLEEP -1);
#ifdef NRF_DEBUG_PRINT
dbg_check_RTCprescaler(); //XXX
#endif
system_on_idle_until_alarm(timediff_ms, PRESCALER_VALUE_IN_DEEP_SLEEP);
#ifdef NRF_DEBUG_PRINT
dbg_printf("RESET...\r\n\r\n");
#endif
reset_cpu();
// should not reach here..
while(1) ;
}
// old version deep sleep code that was used in common_hal_alarm_enter_deep_sleep()
// for anyone who might want true System OFF sleep ..
#if 0
void OLD_go_system_off(void) {
sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_NONE;
sleepmem_wakeup_pin = WAKEUP_PIN_UNDEF;
uint8_t sd_enabled;
sd_softdevice_is_enabled(&sd_enabled);
set_memory_retention();
dbg_printf("OLD go system off.. %d\r\n", sd_enabled);
if (sd_enabled) {
sd_power_system_off();
}
else {
NRF_POWER->SYSTEMOFF = 1;
}
}
#endif
void common_hal_alarm_pretending_deep_sleep(void) {
alarm_pin_pinalarm_prepare_for_deep_sleep();
alarm_time_timealarm_prepare_for_deep_sleep();
#ifdef NRF_DEBUG_PRINT
dbg_printf("\r\npretending to deep sleep...");
#endif
int64_t timediff_ms = alarm_time_timealarm_get_wakeup_timediff_ms();
system_on_idle_until_alarm(timediff_ms, 0);
alarm_reset();
}
void common_hal_alarm_gc_collect(void) {
gc_collect_ptr(shared_alarm_get_wake_alarm());
}

View File

@ -0,0 +1,56 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Dan Halbert for Adafruit Industries.
* Copyright (c) 2021 Junji Sakai
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM__INIT__H
#define MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM__INIT__H
#include "common-hal/alarm/SleepMemory.h"
typedef enum {
NRF_SLEEP_WAKEUP_UNDEFINED,
NRF_SLEEP_WAKEUP_GPIO,
NRF_SLEEP_WAKEUP_TIMER,
NRF_SLEEP_WAKEUP_TOUCHPAD,
NRF_SLEEP_WAKEUP_VBUS,
NRF_SLEEP_WAKEUP_RESETPIN,
NRF_SLEEP_WAKEUP_ZZZ
} nrf_sleep_source_t;
extern const alarm_sleep_memory_obj_t alarm_sleep_memory_obj;
enum {
SLEEPMEM_WAKEUP_BY_NONE = 0,
SLEEPMEM_WAKEUP_BY_PIN = 1,
SLEEPMEM_WAKEUP_BY_TIMER = 2,
};
#define WAKEUP_PIN_UNDEF 0xFF
extern uint8_t sleepmem_wakeup_event;
extern uint8_t sleepmem_wakeup_pin;
extern void alarm_reset(void);
#endif // MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM__INIT__H

View File

@ -0,0 +1,242 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Dan Halbert for Adafruit Industries
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
* Copyright (c) 2021 Junji Sakai
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/runtime.h"
#include <stdio.h>
#include <assert.h>
#include "shared-bindings/alarm/pin/PinAlarm.h"
#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "common-hal/alarm/__init__.h"
#include "nrfx.h"
#include "nrf_gpio.h"
#include "nrfx_gpiote.h"
#include "nrf_soc.h"
#include <string.h>
#include "supervisor/serial.h" // dbg_print
#define WPIN_UNUSED 0xFF
volatile char _pinhandler_gpiote_count;
static bool pins_configured = false;
extern uint32_t reset_reason_saved;
extern void dbg_dump_GPIOregs(void);
void common_hal_alarm_pin_pinalarm_construct(alarm_pin_pinalarm_obj_t *self, mcu_pin_obj_t *pin, bool value, bool edge, bool pull) {
if (edge) {
mp_raise_ValueError(translate("Cannot wake on pin edge. Only level."));
}
if (pin->number >= NUMBER_OF_PINS) {
mp_raise_ValueError(translate("Invalid pin"));
}
self->pin = pin;
self->value = value;
self->pull = pull;
}
mcu_pin_obj_t *common_hal_alarm_pin_pinalarm_get_pin(alarm_pin_pinalarm_obj_t *self) {
return self->pin;
}
bool common_hal_alarm_pin_pinalarm_get_value(alarm_pin_pinalarm_obj_t *self) {
return self->value;
}
bool common_hal_alarm_pin_pinalarm_get_edge(alarm_pin_pinalarm_obj_t *self) {
return false;
}
bool common_hal_alarm_pin_pinalarm_get_pull(alarm_pin_pinalarm_obj_t *self) {
return self->pull;
}
static void pinalarm_gpiote_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) {
++_pinhandler_gpiote_count;
sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_PIN;
sleepmem_wakeup_pin = pin & 0xFF;
}
bool alarm_pin_pinalarm_woke_us_up(void) {
return (sleepmem_wakeup_event == SLEEPMEM_WAKEUP_BY_PIN &&
sleepmem_wakeup_pin != WAKEUP_PIN_UNDEF);
}
mp_obj_t alarm_pin_pinalarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *alarms) {
// First, check to see if we match any given alarms.
for (size_t i = 0; i < n_alarms; i++) {
if (!mp_obj_is_type(alarms[i], &alarm_pin_pinalarm_type)) {
continue;
}
alarm_pin_pinalarm_obj_t *alarm = MP_OBJ_TO_PTR(alarms[i]);
if (alarm->pin->number == sleepmem_wakeup_pin) {
return alarms[i];
}
}
alarm_pin_pinalarm_obj_t *alarm = m_new_obj(alarm_pin_pinalarm_obj_t);
alarm->base.type = &alarm_pin_pinalarm_type;
alarm->pin = NULL;
// Map the pin number back to a pin object.
for (size_t i = 0; i < mcu_pin_globals.map.used; i++) {
const mcu_pin_obj_t* pin_obj = MP_OBJ_TO_PTR(mcu_pin_globals.map.table[i].value);
if ((size_t) pin_obj->number == sleepmem_wakeup_pin) {
alarm->pin = mcu_pin_globals.map.table[i].value;
break;
}
}
return alarm;
}
// These must be static because we need to configure pulls later, right before
// deep sleep.
static uint64_t high_alarms = 0;
static uint64_t low_alarms = 0;
static uint64_t pull_pins = 0;
void alarm_pin_pinalarm_reset(void) {
for (size_t i = 0; i < 64; i++) {
uint64_t mask = 1ull << i;
bool high = (high_alarms & mask) != 0;
bool low = (low_alarms & mask) != 0;
if (!(high || low)) {
continue;
}
reset_pin_number(i);
nrfx_gpiote_in_event_disable((nrfx_gpiote_pin_t)i);
nrfx_gpiote_in_uninit((nrfx_gpiote_pin_t)i);
}
high_alarms = 0;
low_alarms = 0;
pull_pins = 0;
}
static void configure_pins_for_sleep(void) {
nrfx_err_t err;
if ( nrfx_gpiote_is_init() ) {
nrfx_gpiote_uninit();
}
err = nrfx_gpiote_init(NRFX_GPIOTE_CONFIG_IRQ_PRIORITY);
assert(err == NRFX_SUCCESS);
(void)err; // to suppress unused warning
_pinhandler_gpiote_count = 0;
nrfx_gpiote_in_config_t cfg = {
.sense = NRF_GPIOTE_POLARITY_TOGGLE,
.pull = NRF_GPIO_PIN_PULLUP,
.is_watcher = false,
.hi_accuracy = true,
.skip_gpio_setup = false
};
for(size_t i = 0; i < 64; ++i) {
uint64_t mask = 1ull << i;
if (((high_alarms & mask) == 0) && ((low_alarms & mask) == 0)) {
continue;
}
if (((high_alarms & mask) != 0) && ((low_alarms & mask) == 0)) {
cfg.sense = NRF_GPIOTE_POLARITY_LOTOHI;
cfg.pull = ((pull_pins & mask) != 0) ?
NRF_GPIO_PIN_PULLDOWN : NRF_GPIO_PIN_NOPULL;
}
else
if (((high_alarms & mask) == 0) && ((low_alarms & mask) != 0)) {
cfg.sense = NRF_GPIOTE_POLARITY_HITOLO;
cfg.pull = ((pull_pins & mask) != 0) ?
NRF_GPIO_PIN_PULLUP : NRF_GPIO_PIN_NOPULL;
}
else {
cfg.sense = NRF_GPIOTE_POLARITY_TOGGLE;
cfg.pull = NRF_GPIO_PIN_NOPULL;
}
err = nrfx_gpiote_in_init((nrfx_gpiote_pin_t)i, &cfg,
pinalarm_gpiote_handler);
assert(err == NRFX_SUCCESS);
nrfx_gpiote_in_event_enable((nrfx_gpiote_pin_t)i, true);
if (((high_alarms & mask) != 0) && ((low_alarms & mask) == 0)) {
nrf_gpio_cfg_sense_set((uint32_t)i, NRF_GPIO_PIN_SENSE_HIGH);
}
if (((high_alarms & mask) == 0) && ((low_alarms & mask) != 0)) {
nrf_gpio_cfg_sense_set((uint32_t)i, NRF_GPIO_PIN_SENSE_LOW);
}
}
}
void alarm_pin_pinalarm_set_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms) {
// Bitmask of wake up settings.
size_t high_count = 0;
size_t low_count = 0;
int pin_number = -1;
for (size_t i = 0; i < n_alarms; i++) {
if (!mp_obj_is_type(alarms[i], &alarm_pin_pinalarm_type)) {
continue;
}
alarm_pin_pinalarm_obj_t *alarm = MP_OBJ_TO_PTR(alarms[i]);
pin_number = alarm->pin->number;
//dbg_printf("alarm_pin_pinalarm_set_alarms(pin#=%d, val=%d, pull=%d)\r\n", pin_number, alarm->value, alarm->pull);
if (alarm->value) {
high_alarms |= 1ull << pin_number;
high_count++;
} else {
low_alarms |= 1ull << pin_number;
low_count++;
}
if (alarm->pull) {
pull_pins |= 1ull << pin_number;
}
}
if (pin_number != -1) {
if (!deep_sleep) {
configure_pins_for_sleep();
}
else {
// we don't setup gpio HW here but do them in
// alarm_pin_pinalarm_prepare_for_deep_sleep() below
reset_reason_saved = 0;
pins_configured = false;
}
}
else {
//dbg_printf("alarm_pin_pinalarm_set_alarms() no valid pins\r\n");
}
}
void alarm_pin_pinalarm_prepare_for_deep_sleep(void) {
if (!pins_configured) {
configure_pins_for_sleep();
pins_configured = true;
#ifdef NRF_DEBUG_PRINT
//dbg_dump_GPIOregs();
#endif
}
}

View File

@ -0,0 +1,41 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Junji Sakai
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/obj.h"
#include "py/objtuple.h"
typedef struct {
mp_obj_base_t base;
mcu_pin_obj_t *pin;
bool value;
bool pull;
} alarm_pin_pinalarm_obj_t;
void alarm_pin_pinalarm_reset(void);
void alarm_pin_pinalarm_set_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms);
void alarm_pin_pinalarm_prepare_for_deep_sleep(void);
mp_obj_t alarm_pin_pinalarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *alarms);
bool alarm_pin_pinalarm_woke_us_up(void);

View File

@ -0,0 +1,102 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Dan Halbert for Adafruit Industries
* Copyright (c) 2021 Junji Sakai
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/runtime.h"
#include <stdio.h>
#include "common-hal/alarm/__init__.h"
#include "shared-bindings/alarm/time/TimeAlarm.h"
#include "shared-bindings/time/__init__.h"
void common_hal_alarm_time_timealarm_construct(alarm_time_timealarm_obj_t *self, mp_float_t monotonic_time) {
self->monotonic_time = monotonic_time;
}
mp_float_t common_hal_alarm_time_timealarm_get_monotonic_time(alarm_time_timealarm_obj_t *self) {
return self->monotonic_time;
}
mp_obj_t alarm_time_timealarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *alarms) {
// First, check to see if we match
for (size_t i = 0; i < n_alarms; i++) {
if (mp_obj_is_type(alarms[i], &alarm_time_timealarm_type)) {
return alarms[i];
}
}
alarm_time_timealarm_obj_t *timer = m_new_obj(alarm_time_timealarm_obj_t);
timer->base.type = &alarm_time_timealarm_type;
// TODO: Set monotonic_time based on the RTC state.
timer->monotonic_time = 0.0f;
return timer;
}
bool alarm_time_timealarm_woke_us_up(void) {
return sleepmem_wakeup_event == SLEEPMEM_WAKEUP_BY_TIMER;
}
int64_t wakeup_time_saved =0;
int64_t alarm_time_timealarm_get_wakeup_timediff_ms(void) {
if (wakeup_time_saved == 0) {
return -1;
}
return wakeup_time_saved - common_hal_time_monotonic_ms();
}
void alarm_time_timealarm_clear_wakeup_time(void) {
wakeup_time_saved = 0;
}
void alarm_time_timealarm_reset(void) {
port_disable_interrupt_after_ticks_ch(1);
wakeup_time_saved = 0;
}
void alarm_time_timealarm_set_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms) {
bool timealarm_set = false;
alarm_time_timealarm_obj_t *timealarm = MP_OBJ_NULL;
wakeup_time_saved = 0;
for (size_t i = 0; i < n_alarms; i++) {
if (!mp_obj_is_type(alarms[i], &alarm_time_timealarm_type)) {
continue;
}
if (timealarm_set) {
mp_raise_ValueError(translate("Only one alarm.time alarm can be set."));
}
timealarm = MP_OBJ_TO_PTR(alarms[i]);
timealarm_set = true;
}
if (!timealarm_set) {
return;
}
wakeup_time_saved = (int64_t)(timealarm->monotonic_time * 1000.0f);
}
void alarm_time_timealarm_prepare_for_deep_sleep(void) {
}

View File

@ -0,0 +1,50 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Junji Sakai
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/obj.h"
typedef struct {
mp_obj_base_t base;
mp_float_t monotonic_time; // values compatible with time.monotonic_time()
} alarm_time_timealarm_obj_t;
extern volatile int rtc_woke_up_counter;
extern void port_disable_interrupt_after_ticks_ch(uint32_t channel);
extern void port_interrupt_after_ticks_ch(uint32_t channel, uint32_t ticks);
// Find the alarm object that caused us to wake up or create an equivalent one.
mp_obj_t alarm_time_timealarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *alarms);
// Check for the wake up alarm from pretend deep sleep.
bool alarm_time_timealarm_woke_us_up(void);
void alarm_time_timealarm_set_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms);
void alarm_time_timealarm_reset(void);
extern void alarm_time_timealarm_prepare_for_deep_sleep(void);
extern int64_t alarm_time_timealarm_get_wakeup_timediff_ms(void);
extern void alarm_time_timealarm_clear_wakeup_time(void);
extern void dbg_dump_RTCreg(void);
extern void tick_set_prescaler(uint32_t prescaler_val);

View File

@ -0,0 +1,53 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 microDev
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/runtime.h"
#include "shared-bindings/alarm/touch/TouchAlarm.h"
#include "shared-bindings/microcontroller/__init__.h"
//static volatile bool woke_up = false;
void common_hal_alarm_touch_touchalarm_construct(alarm_touch_touchalarm_obj_t *self, const mcu_pin_obj_t *pin) {
mp_raise_NotImplementedError(NULL);
(void)pin;
}
mp_obj_t alarm_touch_touchalarm_get_wakeup_alarm(const size_t n_alarms, const mp_obj_t *alarms) {
return mp_const_none;
}
void alarm_touch_touchalarm_set_alarm(const bool deep_sleep, const size_t n_alarms, const mp_obj_t *alarms) {
}
void alarm_touch_touchalarm_prepare_for_deep_sleep(void) {
}
bool alarm_touch_touchalarm_woke_us_up(void) {
return false;
}
void alarm_touch_touchalarm_reset(void) {
}

View File

@ -0,0 +1,46 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 microDev
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_COMMON_HAL_ALARM_TOUCH_TOUCHALARM_H
#define MICROPY_INCLUDED_COMMON_HAL_ALARM_TOUCH_TOUCHALARM_H
#include "py/obj.h"
#include "common-hal/microcontroller/Pin.h"
typedef struct {
mp_obj_base_t base;
const mcu_pin_obj_t *pin;
} alarm_touch_touchalarm_obj_t;
// Find the alarm object that caused us to wake up or create an equivalent one.
mp_obj_t alarm_touch_touchalarm_get_wakeup_alarm(const size_t n_alarms, const mp_obj_t *alarms);
// Check for the wake up alarm from pretend deep sleep.
void alarm_touch_touchalarm_set_alarm(const bool deep_sleep, const size_t n_alarms, const mp_obj_t *alarms);
void alarm_touch_touchalarm_prepare_for_deep_sleep(void);
bool alarm_touch_touchalarm_woke_us_up(void);
void alarm_touch_touchalarm_reset(void);
#endif // MICROPY_INCLUDED_COMMON_HAL_ALARM_TOUCH_TOUCHALARM_H

View File

@ -127,5 +127,24 @@ void common_hal_mcu_processor_get_uid(uint8_t raw_id[]) {
} }
mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) { mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) {
return RESET_REASON_UNKNOWN; mcu_reset_reason_t r = RESET_REASON_UNKNOWN;
if (reset_reason_saved == 0) {
r = RESET_REASON_POWER_ON;
}
else if (reset_reason_saved & POWER_RESETREAS_RESETPIN_Msk) {
r = RESET_REASON_RESET_PIN;
}
else if (reset_reason_saved & POWER_RESETREAS_DOG_Msk) {
r = RESET_REASON_WATCHDOG;
}
else if (reset_reason_saved & POWER_RESETREAS_SREQ_Msk) {
r = RESET_REASON_SOFTWARE;
}
else if ((reset_reason_saved & POWER_RESETREAS_OFF_Msk) ||
(reset_reason_saved & POWER_RESETREAS_LPCOMP_Msk) ||
(reset_reason_saved & POWER_RESETREAS_NFC_Msk) ||
(reset_reason_saved & POWER_RESETREAS_VBUS_Msk)) {
r = RESET_REASON_DEEP_SLEEP_ALARM;
}
return r;
} }

View File

@ -36,4 +36,6 @@ typedef struct {
// Stores no state currently. // Stores no state currently.
} mcu_processor_obj_t; } mcu_processor_obj_t;
extern uint32_t reset_reason_saved;
#endif // MICROPY_INCLUDED_NRF_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H #endif // MICROPY_INCLUDED_NRF_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H

View File

@ -46,6 +46,9 @@ CIRCUITPY_FRAMEBUFFERIO ?= 1
CIRCUITPY_COUNTIO ?= 1 CIRCUITPY_COUNTIO ?= 1
CIRCUITPY_WATCHDOG ?= 1 CIRCUITPY_WATCHDOG ?= 1
# Sleep and Wakeup
CIRCUITPY_ALARM ?= 1
# nRF52840-specific # nRF52840-specific
ifeq ($(MCU_CHIP),nrf52840) ifeq ($(MCU_CHIP),nrf52840)

View File

@ -116,7 +116,7 @@
// GPIO interrupt // GPIO interrupt
#define NRFX_GPIOTE_ENABLED 1 #define NRFX_GPIOTE_ENABLED 1
#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 #define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 2
#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7 #define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
// NVM controller // NVM controller

View File

@ -0,0 +1,234 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Jun2Sak
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdio.h>
#include <stdarg.h>
#include <stdint.h>
#include <string.h>
#ifdef NRF_DEBUG_PRINT
#define DEBUG_UART_TXPIN 26
#define DEBUG_UART_RXPIN 15
#include "nrfx.h"
#include "nrf_uart.h"
#include "nrf_gpio.h"
#include "nrf_rtc.h"
#include "nrfx_uarte.h"
#include "nrfx_rtc.h"
#include "supervisor/serial.h" // dbg_printf()
#include "shared-bindings/microcontroller/Processor.h"
#include "common-hal/alarm/__init__.h"
extern const nrfx_rtc_t rtc_instance; // port.c
extern uint32_t reset_reason_saved;
const nrfx_uarte_t _dbg_uart_inst = NRFX_UARTE_INSTANCE(1);
static int _dbg_uart_initialized = 0;
#define DBG_PBUF_LEN 80
static char _dbg_pbuf[DBG_PBUF_LEN+1];
void _debug_uart_uninit(void) {
nrf_gpio_cfg(DEBUG_UART_TXPIN,
NRF_GPIO_PIN_DIR_INPUT,
NRF_GPIO_PIN_INPUT_DISCONNECT,
NRF_GPIO_PIN_NOPULL,
NRF_GPIO_PIN_S0S1,
NRF_GPIO_PIN_NOSENSE);
nrfx_uarte_uninit(&_dbg_uart_inst);
}
void _debug_uart_init(void) {
//if (_dbg_uart_initialized) return;
nrfx_uarte_config_t config = {
.pseltxd = DEBUG_UART_TXPIN,
.pselrxd = DEBUG_UART_RXPIN,
.pselcts = NRF_UARTE_PSEL_DISCONNECTED,
.pselrts = NRF_UARTE_PSEL_DISCONNECTED,
.p_context = NULL,
.baudrate = NRF_UART_BAUDRATE_115200,
.interrupt_priority = 7,
.hal_cfg = {
.hwfc = NRF_UARTE_HWFC_DISABLED,
.parity = NRF_UARTE_PARITY_EXCLUDED
}
};
nrfx_uarte_init(&_dbg_uart_inst, &config, NULL);
// drive config
nrf_gpio_cfg(config.pseltxd,
NRF_GPIO_PIN_DIR_OUTPUT,
NRF_GPIO_PIN_INPUT_DISCONNECT,
NRF_GPIO_PIN_PULLUP, // orig=NOPULL
NRF_GPIO_PIN_H0H1, // orig=S0S1
NRF_GPIO_PIN_NOSENSE);
_dbg_uart_initialized = 1;
return;
}
void _debug_print_substr(const char* text, uint32_t length) {
char* data = (char*)text;
int siz;
while(length != 0) {
if (length <= DBG_PBUF_LEN) {
siz = length;
}
else {
siz = DBG_PBUF_LEN;
}
memcpy(_dbg_pbuf, data, siz);
_dbg_pbuf[siz] = 0;
nrfx_uarte_tx(&_dbg_uart_inst, (uint8_t const*)_dbg_pbuf, siz);
data += siz;
length -= siz;
}
}
void _debug_uart_deinit(void) {
nrfx_uarte_uninit(&_dbg_uart_inst);
}
int dbg_printf(const char *fmt, ...) {
va_list ap;
va_start(ap, fmt);
int ret = vprintf(fmt, ap);
va_end(ap);
return ret;
}
void dbg_dump_RTCreg(void) {
dbg_printf("\r\nRTC2\r\n");
NRF_RTC_Type *r = rtc_instance.p_reg;
dbg_printf("PRESCALER=%08X, ", (int)r->PRESCALER);
dbg_printf("COUNTER=%08X ", (int)r->COUNTER);
dbg_printf("INTENSET=%08X ", (int)r->INTENSET);
dbg_printf("EVTENSET=%08X\r\n", (int)r->EVTENSET);
dbg_printf("EVENTS_COMPARE[0..3]=%X,%X,%X,%X ", (int)r->EVENTS_COMPARE[0], (int)r->EVENTS_COMPARE[1], (int)r->EVENTS_COMPARE[2], (int)r->EVENTS_COMPARE[3]);
dbg_printf("CC[0..3]=%08X,%08X,%08X,%08X\r\n", (int)r->CC[0], (int)r->CC[1], (int)r->CC[2], (int)r->CC[3]);
}
int dbg_check_RTCprescaler(void) {
NRF_RTC_Type *r = rtc_instance.p_reg;
if ((int)r->PRESCALER == 0) {
dbg_printf("****** PRESCALER == 0\r\n");
return -1;
}
return 0;
}
void dbg_dump_RAMreg(void) {
int i;
for(i = 0; i <= 8; ++i) {
dbg_printf(" RAM%d:%08X", i, (int)(NRF_POWER->RAM[i].POWER));
if (i==4) dbg_printf("\r\n");
}
dbg_printf("\r\n");
}
void dbg_dump_GPIOregs(void) {
int i, port, col;
NRF_GPIO_Type *gpio[] = { NRF_P0, NRF_P1 };
const char cnf_pull_chr[] = "-D*U"; // pull down, pull up
const char cnf_sense_chr[] = "-?HL"; // sense high, sense low
for(port=0, col=0; port<=1; ++port) {
for(i=0; i<32; ++i) {
uint32_t cnf = gpio[port]->PIN_CNF[i];
if (cnf != 0x0002) { // changed from default value
dbg_printf("[%d_%02d]:%c%c%c%d%c ", port, i,
(cnf & 1) ? 'O' : 'I', // output, input
(cnf & 2) ? 'd' : 'c', // disconnected, connected
cnf_pull_chr[(cnf >> 2) & 3],
(int)((cnf >> 8) & 7), // drive config 0-7
cnf_sense_chr[(cnf >> 16) & 3]);
if (++col >= 6) {
dbg_printf("\r\n");
col = 0;
}
}
}
}
if (col > 0) dbg_printf("\r\n");
dbg_printf("GPIOTE\r\n");
NRF_GPIOTE_Type const *reg = NRF_GPIOTE;
const char config_mode_chr[] = "-E-T"; // event, task
const char config_pol_chr[] = "-HLT"; // low-to-Hi, hi-to-Low, Toggle
const char config_outinit_chr[] = "01"; // initial value is 0 or 1
for(i=0, col=0; i<8; ++i) {
uint32_t conf = reg->CONFIG[i];
if (conf != 0) { // changed from default value
dbg_printf("CONFIG[%d]:%d_%02d,%c%c%c ", i,
(int)((conf >> 13) & 1), (int)((conf >> 8) & 0x1F),
config_mode_chr[conf & 3],
config_pol_chr[(conf >> 16) & 3],
(conf & 3) == 3 ?
config_outinit_chr[(conf >> 20) & 1] : '-');
if (++col >= 4) {
dbg_printf("\r\n");
col = 0;
}
}
}
if (col > 0) dbg_printf("\r\n");
for(i=0; i<8; ++i) {
dbg_printf("EVENTS_IN[%d]:%X ", i, (int)(reg->EVENTS_IN[i]));
if ((i & 3) == 3) dbg_printf("\r\n");
}
dbg_printf("EVENTS_PORT:%X INTENSET:%08X\r\n",
(int)(reg->EVENTS_PORT), (int)(reg->INTENSET));
}
void dbg_dumpQSPIreg(void) {
uint32_t r;
dbg_printf("QSPI\r\n");
r = NRF_QSPI->IFCONFIG0;
dbg_printf("IFCONFIG0 READ=%ld write=%ld ADDR=%ld DPM=%ld PPSIZE=%ld\r\n",
r & 7, (r >> 3) & 7, (r >> 6) & 1, (r >> 7) & 1, (r >> 12) & 1);
r = NRF_QSPI->IFCONFIG1;
dbg_printf("IFCONFIG1 SCKDELAY=%ld SPIMODE=%ld SCKFREQ=%ld\r\n",
r & 0xFF, (r >> 25) & 1, (r >> 28) & 0xF);
r = NRF_QSPI->STATUS;
dbg_printf("STATUS DPM=%ld READY=%ld SREG=0x%02lX\r\n",
(r >> 2) & 1, (r >> 3) & 1, (r >> 24) & 0xFF);
r = NRF_QSPI->DPMDUR;
dbg_printf("DPMDUR ENTER=%ld EXIT=%ld\r\n", r & 0xFFFF, (r >> 16) & 0xFFFF);
}
void dbg_dump_reset_reason(void) {
int reset_reason = (int)common_hal_mcu_processor_get_reset_reason();
const char* rr_str[] = {
"POWER_ON", "BROWNOUT", "SOFTWARE", "DEEPSLEEPALARM",
"RESET_PIN", "WATCHDOG", "UNKNOWN"
};
dbg_printf("reset_reason=%s\r\n", rr_str[reset_reason]);
}
#else /*!NRF_DEBUG_PRINT*/
int dbg_printf(const char *fmt, ...) {
return 0;
}
#endif /*!NRF_DEBUG_PRINT*/

View File

@ -4,6 +4,7 @@
* The MIT License (MIT) * The MIT License (MIT)
* *
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
* Copyright (c) 2021 Junji Sakai
* *
* Permission is hereby granted, free of charge, to any person obtaining a copy * Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal * of this software and associated documentation files (the "Software"), to deal
@ -51,6 +52,7 @@
#include "common-hal/rtc/RTC.h" #include "common-hal/rtc/RTC.h"
#include "common-hal/neopixel_write/__init__.h" #include "common-hal/neopixel_write/__init__.h"
#include "common-hal/watchdog/WatchDogTimer.h" #include "common-hal/watchdog/WatchDogTimer.h"
#include "common-hal/alarm/__init__.h"
#include "shared-bindings/microcontroller/__init__.h" #include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/rtc/__init__.h" #include "shared-bindings/rtc/__init__.h"
@ -73,9 +75,14 @@ static void power_warning_handler(void) {
reset_into_safe_mode(BROWNOUT); reset_into_safe_mode(BROWNOUT);
} }
#ifdef NRF_DEBUG_PRINT
extern void _debug_uart_init(void);
#endif
uint32_t reset_reason_saved = 0;
const nrfx_rtc_t rtc_instance = NRFX_RTC_INSTANCE(2); const nrfx_rtc_t rtc_instance = NRFX_RTC_INSTANCE(2);
const nrfx_rtc_config_t rtc_config = { nrfx_rtc_config_t rtc_config = {
.prescaler = RTC_FREQ_TO_PRESCALER(0x8000), .prescaler = RTC_FREQ_TO_PRESCALER(0x8000),
.reliable = 0, .reliable = 0,
.tick_latency = 0, .tick_latency = 0,
@ -100,6 +107,12 @@ void rtc_handler(nrfx_rtc_int_type_t int_type) {
supervisor_tick(); supervisor_tick();
} else if (int_type == NRFX_RTC_INT_COMPARE0) { } else if (int_type == NRFX_RTC_INT_COMPARE0) {
nrfx_rtc_cc_set(&rtc_instance, 0, 0, false); nrfx_rtc_cc_set(&rtc_instance, 0, 0, false);
} else if (int_type == NRFX_RTC_INT_COMPARE1) {
// used in light sleep
#if CIRCUITPY_ALARM
sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_TIMER;
#endif
nrfx_rtc_cc_set(&rtc_instance, 1, 0, false);
} }
} }
@ -124,6 +137,22 @@ void tick_init(void) {
} }
} }
void tick_uninit(void) {
nrfx_rtc_counter_clear(&rtc_instance);
nrfx_rtc_disable(&rtc_instance);
nrfx_rtc_uninit(&rtc_instance);
}
void tick_set_prescaler(uint32_t prescaler_val) {
tick_uninit();
// update of prescaler value sometimes fails if we skip this delay..
NRFX_DELAY_US(1000);
uint16_t prescaler_saved = rtc_config.prescaler;
rtc_config.prescaler = prescaler_val;
tick_init();
rtc_config.prescaler = prescaler_saved;
}
safe_mode_t port_init(void) { safe_mode_t port_init(void) {
nrf_peripherals_clocks_init(); nrf_peripherals_clocks_init();
@ -153,11 +182,21 @@ safe_mode_t port_init(void) {
analogin_init(); analogin_init();
#endif #endif
reset_reason_saved = NRF_POWER->RESETREAS;
// clear all RESET reason bits
NRF_POWER->RESETREAS = reset_reason_saved;
// clear wakeup event/pin when reset by reset-pin
if (reset_reason_saved & NRF_POWER_RESETREAS_RESETPIN_MASK) {
#if CIRCUITPY_ALARM
sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_NONE;
#endif
}
// If the board was reset by the WatchDogTimer, we may // If the board was reset by the WatchDogTimer, we may
// need to boot into safe mode. Reset the RESETREAS bit // need to boot into safe mode. Reset the RESETREAS bit
// for the WatchDogTimer so we don't encounter this the // for the WatchDogTimer so we don't encounter this the
// next time we reboot. // next time we reboot.
if (NRF_POWER->RESETREAS & POWER_RESETREAS_DOG_Msk) { if (reset_reason_saved & POWER_RESETREAS_DOG_Msk) {
NRF_POWER->RESETREAS = POWER_RESETREAS_DOG_Msk; NRF_POWER->RESETREAS = POWER_RESETREAS_DOG_Msk;
uint32_t usb_reg = NRF_POWER->USBREGSTATUS; uint32_t usb_reg = NRF_POWER->USBREGSTATUS;
@ -219,6 +258,10 @@ void reset_port(void) {
#endif #endif
reset_all_pins(); reset_all_pins();
#ifdef NRF_DEBUG_PRINT
_debug_uart_init();
#endif
} }
void reset_to_bootloader(void) { void reset_to_bootloader(void) {
@ -295,7 +338,7 @@ void port_disable_tick(void) {
nrfx_rtc_tick_disable(&rtc_instance); nrfx_rtc_tick_disable(&rtc_instance);
} }
void port_interrupt_after_ticks(uint32_t ticks) { void port_interrupt_after_ticks_ch(uint32_t channel, uint32_t ticks) {
uint32_t current_ticks = nrfx_rtc_counter_get(&rtc_instance); uint32_t current_ticks = nrfx_rtc_counter_get(&rtc_instance);
uint32_t diff = 3; uint32_t diff = 3;
if (ticks > diff) { if (ticks > diff) {
@ -304,7 +347,15 @@ void port_interrupt_after_ticks(uint32_t ticks) {
if (diff > 0xffffff) { if (diff > 0xffffff) {
diff = 0xffffff; diff = 0xffffff;
} }
nrfx_rtc_cc_set(&rtc_instance, 0, current_ticks + diff, true); nrfx_rtc_cc_set(&rtc_instance, channel, current_ticks + diff, true);
}
void port_disable_interrupt_after_ticks_ch(uint32_t channel) {
nrfx_rtc_cc_disable(&rtc_instance, channel);
}
void port_interrupt_after_ticks(uint32_t ticks) {
port_interrupt_after_ticks_ch(0, ticks);
} }
void port_idle_until_interrupt(void) { void port_idle_until_interrupt(void) {
@ -355,3 +406,9 @@ void HardFault_Handler(void) {
asm ("nop;"); asm ("nop;");
} }
} }
#if CIRCUITPY_ALARM
// in case boards/xxx/board.c does not provide board_deinit()
MP_WEAK void board_deinit(void) {
}
#endif

View File

@ -37,6 +37,31 @@
#include "supervisor/shared/external_flash/common_commands.h" #include "supervisor/shared/external_flash/common_commands.h"
#include "supervisor/shared/external_flash/qspi_flash.h" #include "supervisor/shared/external_flash/qspi_flash.h"
#ifdef NRF_DEBUG_PRINT
#include "supervisor/serial.h" // dbg_printf()
#endif
#ifdef QSPI_FLASH_POWERDOWN
// Parameters for external QSPI Flash power-down
// for W25Q128FV,
// tDP (nCS high to Power-down mode) = 3us
// tRES (nCS high to Standby mode) = 3us
// sck_delay = max(tDP, tRES) / 62.5ns = 48 -> 50 (w/ margin)
#define DUR_DPM_ENTER 1 // tDP in (256*62.5ns) units
#define DUR_DPM_EXIT 1 // tRES in (256*62.5ns) units
#define SCK_DELAY 50 // max(tDP, tRES) in (62.5ns) units
// wait necessary just after DPM enter/exit (cut and try)
#define WAIT_AFTER_DPM_ENTER 10 // usec
#define WAIT_AFTER_DPM_EXIT 50 // usec
static int sck_delay_saved = 0;
#endif
#ifdef NRF_DEBUG_PRINT
extern void dbg_dumpQSPIreg(void);
#else
#define dbg_dumpQSPIreg(...)
#endif
// When USB is disconnected, disable QSPI in sleep mode to save energy // When USB is disconnected, disable QSPI in sleep mode to save energy
void qspi_disable(void) { void qspi_disable(void) {
@ -188,7 +213,11 @@ void spi_flash_init(void) {
.readoc = NRF_QSPI_READOC_FASTREAD, .readoc = NRF_QSPI_READOC_FASTREAD,
.writeoc = NRF_QSPI_WRITEOC_PP, .writeoc = NRF_QSPI_WRITEOC_PP,
.addrmode = NRF_QSPI_ADDRMODE_24BIT, .addrmode = NRF_QSPI_ADDRMODE_24BIT,
#ifdef QSPI_FLASH_POWERDOWN
.dpmconfig = true
#else
.dpmconfig = false .dpmconfig = false
#endif
}, },
.phy_if = { .phy_if = {
.sck_freq = NRF_QSPI_FREQ_32MDIV16, // Start at a slow 2MHz and speed up once we know what we're talking to. .sck_freq = NRF_QSPI_FREQ_32MDIV16, // Start at a slow 2MHz and speed up once we know what we're talking to.
@ -213,6 +242,13 @@ void spi_flash_init(void) {
// No callback for blocking API // No callback for blocking API
nrfx_qspi_init(&qspi_cfg, NULL, NULL); nrfx_qspi_init(&qspi_cfg, NULL, NULL);
#ifdef QSPI_FLASH_POWERDOWN
// If pin-reset while flash is in power-down mode,
// the flash cannot accept any commands. Send CMD_WAKE to release it.
spi_flash_write_command(CMD_WAKE, NULL, 0);
NRFX_DELAY_US(WAIT_AFTER_DPM_EXIT);
#endif
} }
void spi_flash_init_device(const external_flash_device *device) { void spi_flash_init_device(const external_flash_device *device) {
@ -236,3 +272,61 @@ void spi_flash_init_device(const external_flash_device *device) {
NRF_QSPI->IFCONFIG1 &= ~QSPI_IFCONFIG1_SCKFREQ_Msk; NRF_QSPI->IFCONFIG1 &= ~QSPI_IFCONFIG1_SCKFREQ_Msk;
NRF_QSPI->IFCONFIG1 |= sckfreq << QSPI_IFCONFIG1_SCKFREQ_Pos; NRF_QSPI->IFCONFIG1 |= sckfreq << QSPI_IFCONFIG1_SCKFREQ_Pos;
} }
void qspi_flash_enter_sleep(void) {
#ifdef QSPI_FLASH_POWERDOWN
uint32_t r;
NRF_QSPI->DPMDUR =
((DUR_DPM_ENTER & 0xFFFF) << 16) | (DUR_DPM_EXIT & 0xFFFF);
// set sck_delay tempolarily
r = NRF_QSPI->IFCONFIG1;
sck_delay_saved = (r & QSPI_IFCONFIG1_SCKDELAY_Msk)
>> QSPI_IFCONFIG1_SCKDELAY_Pos;
NRF_QSPI->IFCONFIG1
= (NRF_QSPI->IFCONFIG1 & ~QSPI_IFCONFIG1_SCKDELAY_Msk)
| (SCK_DELAY << QSPI_IFCONFIG1_SCKDELAY_Pos);
// enabling IFCONFIG0.DPMENABLE here won't work.
// -> do it in spi_flash_init()
//NRF_QSPI->IFCONFIG0 |= QSPI_IFCONFIG0_DPMENABLE_Msk;
//dbg_dumpQSPIreg();
// enter deep power-down mode (DPM)
NRF_QSPI->IFCONFIG1 |= QSPI_IFCONFIG1_DPMEN_Msk;
NRFX_DELAY_US(WAIT_AFTER_DPM_ENTER);
if (!(NRF_QSPI->STATUS & QSPI_STATUS_DPM_Msk)) {
#ifdef NRF_DEBUG_PRINT
dbg_printf("qspi flash: DPM failed\r\n");
#endif
}
#endif
qspi_disable();
//dbg_dumpQSPIreg();
}
void qspi_flash_exit_sleep(void) {
qspi_enable();
#ifdef QSPI_FLASH_POWERDOWN
if (NRF_QSPI->STATUS & QSPI_STATUS_DPM_Msk) {
// exit deep power-down mode
NRF_QSPI->IFCONFIG1 &= ~QSPI_IFCONFIG1_DPMEN_Msk;
NRFX_DELAY_US(WAIT_AFTER_DPM_EXIT);
if (NRF_QSPI->STATUS & QSPI_STATUS_DPM_Msk) {
#ifdef NRF_DEBUG_PRINT
dbg_printf("qspi flash: exiting DPM failed\r\n");
#endif
}
// restore sck_delay
if (sck_delay_saved == 0) {
sck_delay_saved = 10; // default
}
NRF_QSPI->IFCONFIG1
= (NRF_QSPI->IFCONFIG1 & ~QSPI_IFCONFIG1_SCKDELAY_Msk)
| (sck_delay_saved << QSPI_IFCONFIG1_SCKDELAY_Pos);
}
//dbg_dumpQSPIreg();
#endif
}

View File

@ -0,0 +1,2 @@
extern void qspi_flash_enter_sleep(void);
extern void qspi_flash_exit_sleep(void);

View File

@ -244,6 +244,7 @@ const mp_obj_module_t alarm_module = {
}; };
extern void port_idle_until_interrupt(void); extern void port_idle_until_interrupt(void);
MP_WEAK void common_hal_alarm_pretending_deep_sleep(void) { MP_WEAK void common_hal_alarm_pretending_deep_sleep(void) {
port_idle_until_interrupt(); port_idle_until_interrupt();
} }

View File

@ -49,7 +49,7 @@
//| but the `displayio.Bitmap.dirty` method must be used to inform //| but the `displayio.Bitmap.dirty` method must be used to inform
//| displayio when a bitmap was modified through the buffer interface. //| displayio when a bitmap was modified through the buffer interface.
//| //|
//| `bitmaptools.arrayblit` can also be useful to omve data efficiently //| `bitmaptools.arrayblit` can also be useful to move data efficiently
//| into a Bitmap. //| into a Bitmap.
//| """ //| """
//| //|

View File

@ -29,6 +29,7 @@
#include <stdbool.h> #include <stdbool.h>
#include <stdint.h> #include <stdint.h>
#include <stdio.h>
#include "py/mpconfig.h" #include "py/mpconfig.h"
@ -47,4 +48,7 @@ char serial_read(void);
bool serial_bytes_available(void); bool serial_bytes_available(void);
bool serial_connected(void); bool serial_connected(void);
// XXX used in nrf52-sleep debug
int dbg_printf(const char *fmt, ...)__attribute__((format (printf, 1, 2)));
#endif // MICROPY_INCLUDED_SUPERVISOR_SERIAL_H #endif // MICROPY_INCLUDED_SUPERVISOR_SERIAL_H

View File

@ -37,6 +37,12 @@
#include "tusb.h" #include "tusb.h"
#ifdef NRF_DEBUG_PRINT
// XXX these functions are in nrf/supervisor/debug_uart.c
extern void _debug_uart_init(void);
extern void _debug_print_substr(const char *text, uint32_t length);
#endif
/* /*
* Note: DEBUG_UART currently only works on STM32, * Note: DEBUG_UART currently only works on STM32,
* enabling on another platform will cause a crash. * enabling on another platform will cause a crash.
@ -64,10 +70,17 @@ void serial_early_init(void) {
buf_array, true); buf_array, true);
common_hal_busio_uart_never_reset(&debug_uart); common_hal_busio_uart_never_reset(&debug_uart);
#endif #endif
#ifdef NRF_DEBUG_PRINT
_debug_uart_init();
#endif
} }
void serial_init(void) { void serial_init(void) {
usb_init(); usb_init();
#ifdef NRF_DEBUG_PRINT
_debug_uart_init();
#endif
} }
bool serial_connected(void) { bool serial_connected(void) {
@ -146,8 +159,14 @@ void serial_write_substring(const char *text, uint32_t length) {
#if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX)
int uart_errcode; int uart_errcode;
common_hal_busio_uart_write(&debug_uart, (const uint8_t *)text, length, &uart_errcode); common_hal_busio_uart_write(&debug_uart, (const uint8_t *)text, length, &uart_errcode);
#endif #endif
#ifdef NRF_DEBUG_PRINT
_debug_print_substr(text, length);
#endif
} }
void serial_write(const char *text) { void serial_write(const char *text) {