Merge remote-tracking branch 'origin/main' into defining_parameters

docs/design_guide.rst

@@ -460,7 +460,7 @@ Renders as:
 
 Documentation References to other Libraries
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-When you need to reference documentation in other libraries you should include the class by using single
+When you need to make references to documentation in other libraries you should refer the class using single
 backticks  ``:class:`~adafruit_motor.servo.Servo```. You must also add the reference in the ``conf.py`` file in the
 ``intersphinx_mapping section`` by adding a new entry::
 

locale/ID.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-07 12:23+0000\n"
+"PO-Revision-Date: 2021-04-28 16:11+0000\n"
 "Last-Translator: Reza Almanda <rezaalmanda27@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: ID\n"
@@ -14,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.6-dev\n"
+"X-Generator: Weblate 4.7-dev\n"
 
 #: main.c
 msgid ""
@@ -698,6 +698,7 @@ msgstr ""
 "digunakan"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -753,14 +754,6 @@ msgid ""
 msgstr ""
 "Koneksi telah terputus dan tidak dapat lagi digunakan. Buat koneksi baru."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "File .mpy rusak"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Kode raw rusak"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr ""
@@ -1315,7 +1308,8 @@ msgstr "Fase tidak valid"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Pin tidak valid"
@@ -1670,11 +1664,11 @@ msgstr "Hanya 8 atau 16 bit mono dengan "
 
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
-msgstr ""
+msgstr "Hanya alamat IPv4 yang didukung"
 
 #: ports/esp32s2/common-hal/socketpool/SocketPool.c
 msgid "Only IPv4 sockets supported"
-msgstr ""
+msgstr "Hanysa socket IPv4 yang didukung"
 
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
@@ -1698,6 +1692,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -1715,15 +1710,15 @@ msgstr ""
 
 #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
 msgid "Operation timed out"
-msgstr ""
+msgstr "Waktu habis"
 
 #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c
 msgid "Out of memory"
-msgstr ""
+msgstr "Kehabisan memori"
 
 #: ports/esp32s2/common-hal/socketpool/SocketPool.c
 msgid "Out of sockets"
-msgstr ""
+msgstr "Kehabisan socket"
 
 #: ports/raspberrypi/bindings/rp2pio/StateMachine.c
 msgid "Out-buffer elements must be <= 4 bytes long"
@@ -1769,7 +1764,7 @@ msgstr "ParallelBus belum didukung"
 
 #: ports/esp32s2/common-hal/audiobusio/__init__.c
 msgid "Peripheral in use"
-msgstr ""
+msgstr "Periferal sedang digunakan"
 
 #: py/moduerrno.c
 msgid "Permission denied"
@@ -1781,7 +1776,7 @@ msgstr ""
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 msgid "Pin count too large"
-msgstr ""
+msgstr "Jumlah pin terlalu besar"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
@@ -1823,7 +1818,7 @@ msgstr ""
 
 #: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Pins must be sequential"
-msgstr ""
+msgstr "Pin harus berurutan"
 
 #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
 msgid "Pins must share PWM slice"
@@ -2623,10 +2618,6 @@ msgstr "hanya mampu memiliki hingga 4 parameter untuk Thumb assembly"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr ""
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr ""
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3139,6 +3130,14 @@ msgstr "identifier didefinisi ulang sebagai global"
 msgid "identifier redefined as nonlocal"
 msgstr "identifier didefinisi ulang sebagai nonlocal"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr ""
@@ -3258,6 +3257,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "argumen-argumen tidak valid"
@@ -3267,10 +3270,6 @@ msgstr "argumen-argumen tidak valid"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "cert tidak valid"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3301,10 +3300,6 @@ msgstr ""
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "key tidak valid"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "micropython decorator tidak valid"
@@ -4247,11 +4242,11 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/wifi/Radio.c
 msgid "wifi is not enabled"
-msgstr ""
+msgstr "wifi tidak diaktifkan"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"
-msgstr ""
+msgstr "jendela harus <= interval"
 
 #: extmod/ulab/code/numpy/numerical/numerical.c
 msgid "wrong axis index"
@@ -4314,6 +4309,18 @@ msgstr "zi harus berjenis float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "File .mpy rusak"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Kode raw rusak"
+
+#~ msgid "invalid cert"
+#~ msgstr "cert tidak valid"
+
+#~ msgid "invalid key"
+#~ msgstr "key tidak valid"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Fungsi Viper saat ini tidak mendukung lebih dari 4 argumen"
 

locale/circuitpython.pot

@@ -681,6 +681,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -1285,7 +1286,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr ""
@@ -1663,6 +1665,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 

locale/cs.po

@@ -684,6 +684,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -736,14 +737,6 @@ msgid ""
 "connection."
 msgstr ""
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr ""
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr ""
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr ""
@@ -1296,7 +1289,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr ""
@@ -1674,6 +1668,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2577,10 +2572,6 @@ msgstr ""
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr ""
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr ""
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3093,6 +3084,14 @@ msgstr ""
 msgid "identifier redefined as nonlocal"
 msgstr ""
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr ""
@@ -3212,6 +3211,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -3221,10 +3224,6 @@ msgstr ""
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr ""
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3255,10 +3254,6 @@ msgstr ""
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr ""
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr ""

locale/de_DE.po

@@ -694,6 +694,7 @@ msgstr ""
 "Die Frequenz eines bereits verwendeten Timers kann nicht variiert werden"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr "Kann nicht auf Flanke wecken, nur auf Level."
 
@@ -751,14 +752,6 @@ msgstr ""
 "Die Verbindung wurde getrennt und kann nicht mehr verwendet werden. "
 "Erstellen Sie eine neue Verbindung."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Beschädigte .mpy Datei"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Beschädigter raw code"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "Konnte Kamera nicht initialisieren"
@@ -1316,7 +1309,8 @@ msgstr "Ungültige Phase"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Ungültiger Pin"
@@ -1701,6 +1695,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2636,10 +2631,6 @@ msgstr "kann nur bis zu 4 Parameter für die Thumb assembly haben"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "kann nur bis zu 4 Parameter für die Xtensa assembly haben"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "kann nur Bytecode speichern"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3166,6 +3157,14 @@ msgstr "Bezeichner als global neu definiert"
 msgid "identifier redefined as nonlocal"
 msgstr "Bezeichner als nonlocal definiert"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "unvollständiges Format"
@@ -3285,6 +3284,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr "Das Intervall muss im Bereich %s-%s sein"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "ungültige argumente"
@@ -3294,10 +3297,6 @@ msgstr "ungültige argumente"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "ungültiges cert"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3328,10 +3327,6 @@ msgstr "ungültiger Formatbezeichner"
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "ungültiger Schlüssel"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "ungültiger micropython decorator"
@@ -4357,6 +4352,21 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Beschädigte .mpy Datei"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Beschädigter raw code"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "kann nur Bytecode speichern"
+
+#~ msgid "invalid cert"
+#~ msgstr "ungültiges cert"
+
+#~ msgid "invalid key"
+#~ msgstr "ungültiger Schlüssel"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Viper-Funktionen unterstützen derzeit nicht mehr als 4 Argumente"
 

locale/el.po

@@ -681,6 +681,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -733,14 +734,6 @@ msgid ""
 "connection."
 msgstr ""
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr ""
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr ""
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr ""
@@ -1293,7 +1286,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr ""
@@ -1671,6 +1665,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2574,10 +2569,6 @@ msgstr ""
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr ""
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr ""
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3090,6 +3081,14 @@ msgstr ""
 msgid "identifier redefined as nonlocal"
 msgstr ""
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr ""
@@ -3209,6 +3208,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -3218,10 +3221,6 @@ msgstr ""
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr ""
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3252,10 +3251,6 @@ msgstr ""
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr ""
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr ""

locale/en_GB.po

@@ -692,6 +692,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Cannot vary frequency on a timer that is already in use"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr "Cannot wake on pin edge. Only level."
 
@@ -748,14 +749,6 @@ msgstr ""
 "Connection has been disconnected and can no longer be used. Create a new "
 "connection."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Corrupt .mpy file"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Corrupt raw code"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "Could not initialise camera"
@@ -1310,7 +1303,8 @@ msgstr "Invalid phase"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Invalid pin"
@@ -1692,6 +1686,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Only one TouchAlarm can be set in deep sleep."
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr "Only one alarm.time alarm can be set."
 
@@ -2618,10 +2613,6 @@ msgstr "Can only have up to 4 parameters to thumb assembly"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "Can only have up to 4 parameters to xtensa assembly"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "Can only save bytecode"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr "Can't add special method to already-subclassed class"
@@ -3137,6 +3128,14 @@ msgstr "identifier redefined as global"
 msgid "identifier redefined as nonlocal"
 msgstr "identifier redefined as nonlocal"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "incomplete format"
@@ -3256,6 +3255,10 @@ msgstr "interp is defined for 1D arrays of equal length"
 msgid "interval must be in range %s-%s"
 msgstr "interval must be in range %s-%s"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "invalid arguments"
@@ -3265,10 +3268,6 @@ msgstr "invalid arguments"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "invalid cert"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3299,10 +3298,6 @@ msgstr "invalid format specifier"
 msgid "invalid hostname"
 msgstr "invalid hostname"
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "invalid key"
-
 #: py/compile.c
 #, fuzzy
 msgid "invalid micropython decorator"
@@ -4314,6 +4309,21 @@ msgstr "zi must be of float type"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi must be of shape (n_section, 2)"
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Corrupt .mpy file"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Corrupt raw code"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "Can only save bytecode"
+
+#~ msgid "invalid cert"
+#~ msgstr "invalid cert"
+
+#~ msgid "invalid key"
+#~ msgstr "invalid key"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Viper functions don't currently support more than 4 arguments"
 

locale/es.po

@@ -8,7 +8,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-25 18:43+0000\n"
+"PO-Revision-Date: 2021-04-28 16:11+0000\n"
 "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
 "Language-Team: \n"
 "Language: es\n"
@@ -701,6 +701,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "No puede variar la frecuencia en un temporizador que ya está en uso"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr "No puede despertar en pin edge, solo en nivel."
 
@@ -757,14 +758,6 @@ msgstr ""
 "La conexión se ha desconectado y ya no se puede usar. Crea una nueva "
 "conexión."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Archivo .mpy corrupto"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Código crudo corrupto"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "No se puede inicializar Camera"
@@ -1327,7 +1320,8 @@ msgstr "Fase inválida"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Pin inválido"
@@ -1715,6 +1709,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Solamente una TouchAlarm puede ser configurada durante deep sleep."
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr "Solamente una alarm.time puede ser configurada."
 
@@ -2651,10 +2646,6 @@ msgstr "solo puede tener hasta 4 parámetros para ensamblar Thumb"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "solo puede tener hasta 4 parámetros para ensamblador Xtensa"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "solo puede almacenar bytecode"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr "no se puede agregar un método a una clase ya subclasificada"
@@ -3174,6 +3165,14 @@ msgstr "identificador redefinido como global"
 msgid "identifier redefined as nonlocal"
 msgstr "identificador redefinido como nonlocal"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr "archivo .mpy incompatible"
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr "arquitectura nativa de .mpy incompatible"
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "formato incompleto"
@@ -3293,6 +3292,10 @@ msgstr "interp está definido para arreglos de 1D del mismo tamaño"
 msgid "interval must be in range %s-%s"
 msgstr "el intervalo debe ser der rango %s-%s"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr "arquitectura inválida"
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "argumentos inválidos"
@@ -3302,10 +3305,6 @@ msgstr "argumentos inválidos"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr "los bits_per_pixel %d no son validos, deben ser 1, 4, 8, 16, 24 o 32"
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "certificado inválido"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr "decorador invalido"
@@ -3336,10 +3335,6 @@ msgstr "especificador de formato inválido"
 msgid "invalid hostname"
 msgstr "hostname inválido"
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "llave inválida"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "decorador de micropython inválido"
@@ -4358,6 +4353,21 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Archivo .mpy corrupto"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Código crudo corrupto"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "solo puede almacenar bytecode"
+
+#~ msgid "invalid cert"
+#~ msgstr "certificado inválido"
+
+#~ msgid "invalid key"
+#~ msgstr "llave inválida"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "funciones Viper no soportan por el momento, más de 4 argumentos"
 

locale/fil.po

@@ -688,6 +688,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -741,14 +742,6 @@ msgid ""
 "connection."
 msgstr ""
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr ""
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr ""
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr ""
@@ -1308,7 +1301,8 @@ msgstr "Mali ang phase"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Mali ang pin"
@@ -1689,6 +1683,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2603,10 +2598,6 @@ msgstr "maaari lamang magkaroon ng hanggang 4 na parameter sa Thumb assembly"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "maaari lamang magkaroon ng hanggang 4 na parameter sa Xtensa assembly"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "maaring i-save lamang ang bytecode"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3131,6 +3122,14 @@ msgstr "identifier ginawang global"
 msgid "identifier redefined as nonlocal"
 msgstr "identifier ginawang nonlocal"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "hindi kumpleto ang format"
@@ -3250,6 +3249,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "mali ang mga argumento"
@@ -3259,10 +3262,6 @@ msgstr "mali ang mga argumento"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "mali ang cert"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3293,10 +3292,6 @@ msgstr "mali ang format specifier"
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "mali ang key"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "mali ang micropython decorator"
@@ -4317,6 +4312,15 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "can only save bytecode"
+#~ msgstr "maaring i-save lamang ang bytecode"
+
+#~ msgid "invalid cert"
+#~ msgstr "mali ang cert"
+
+#~ msgid "invalid key"
+#~ msgstr "mali ang key"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr ""
 #~ "Ang mga function ng Viper ay kasalukuyang hindi sumusuporta sa higit sa 4 "

locale/fr.po

@@ -8,7 +8,7 @@ msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-24 14:29+0000\n"
+"PO-Revision-Date: 2021-04-28 16:11+0000\n"
 "Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
@@ -707,6 +707,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Impossible de faire varier la fréquence sur un minuteur déjà utilisée"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr "Ne peut reveillé sur le board de broche. Seuleument à niveau."
 
@@ -764,14 +765,6 @@ msgstr ""
 "La connexion a été déconnectée et ne peut plus être utilisée. Créez une "
 "nouvelle connexion."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Fichier .mpy corrompu"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Code brut corrompu"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "Impossible d'initialiser Camera"
@@ -1339,7 +1332,8 @@ msgstr "Phase invalide"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Broche invalide"
@@ -1725,6 +1719,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Seulement une TouchAlarm peu être réglée en someil profond."
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr "Seulement une alarme alarm.time peut être réglée."
 
@@ -2666,10 +2661,6 @@ msgstr "il peut y avoir jusqu'à 4 paramètres pour l'assemblage Thumb"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "maximum 4 paramètres pour l'assembleur Xtensa"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "ne peut sauvegarder que du bytecode"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3197,6 +3188,14 @@ msgstr "identifiant redéfini comme global"
 msgid "identifier redefined as nonlocal"
 msgstr "identifiant redéfini comme nonlocal"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr "Fichier .mpy incompatible"
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr "architecture native .mpy incompatible"
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "format incomplet"
@@ -3317,6 +3316,10 @@ msgstr "interp est défini pour les matrices 1D de longueur égale"
 msgid "interval must be in range %s-%s"
 msgstr "interval doit être dans la portée %s-%s"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr "architecture invalide"
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "arguments invalides"
@@ -3326,10 +3329,6 @@ msgstr "arguments invalides"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr "bits_per_pixel %d est invalid, doit être 1, 4, 8, 16, 24 ou 32"
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "certificat invalide"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr "décorateur invalide"
@@ -3360,10 +3359,6 @@ msgstr "spécification de format invalide"
 msgid "invalid hostname"
 msgstr "hostname incorrect"
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "clé invalide"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "décorateur micropython invalide"
@@ -4384,6 +4379,21 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Fichier .mpy corrompu"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Code brut corrompu"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "ne peut sauvegarder que du bytecode"
+
+#~ msgid "invalid cert"
+#~ msgstr "certificat invalide"
+
+#~ msgid "invalid key"
+#~ msgstr "clé invalide"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr ""
 #~ "les fonctions de Viper ne supportent pas plus de 4 arguments actuellement"

locale/hi.po

@@ -681,6 +681,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -733,14 +734,6 @@ msgid ""
 "connection."
 msgstr ""
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr ""
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr ""
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr ""
@@ -1293,7 +1286,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr ""
@@ -1671,6 +1665,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2574,10 +2569,6 @@ msgstr ""
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr ""
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr ""
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3090,6 +3081,14 @@ msgstr ""
 msgid "identifier redefined as nonlocal"
 msgstr ""
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr ""
@@ -3209,6 +3208,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -3218,10 +3221,6 @@ msgstr ""
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr ""
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3252,10 +3251,6 @@ msgstr ""
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr ""
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr ""

locale/it_IT.po

@@ -698,6 +698,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -751,14 +752,6 @@ msgid ""
 "connection."
 msgstr ""
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr ""
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr ""
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr ""
@@ -1319,7 +1312,8 @@ msgstr "Fase non valida"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Pin non valido"
@@ -1703,6 +1697,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2621,10 +2616,6 @@ msgstr "sono disponibili fino a 4 parametri per il Xtensa assembly"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "sono disponibili fino a 4 parametri per il Xtensa assembly"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "È possibile salvare solo bytecode"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3144,6 +3135,14 @@ msgstr "identificatore ridefinito come globale"
 msgid "identifier redefined as nonlocal"
 msgstr "identificatore ridefinito come nonlocal"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "formato incompleto"
@@ -3263,6 +3262,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "argomenti non validi"
@@ -3272,10 +3275,6 @@ msgstr "argomenti non validi"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "certificato non valido"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3306,10 +3305,6 @@ msgstr "specificatore di formato non valido"
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "chiave non valida"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "decoratore non valido in micropython"
@@ -4336,6 +4331,15 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "can only save bytecode"
+#~ msgstr "È possibile salvare solo bytecode"
+
+#~ msgid "invalid cert"
+#~ msgstr "certificato non valido"
+
+#~ msgid "invalid key"
+#~ msgstr "chiave non valida"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Le funzioni Viper non supportano più di 4 argomenti al momento"
 

locale/ja.po

@@ -690,6 +690,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "使用中のタイマー上では周波数を変えられません"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -744,14 +745,6 @@ msgid ""
 "connection."
 msgstr "接続は切断済みでもう使えません。新しい接続を作成してください"
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "破損した .mpy ファイル"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "破損したraw code"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "カメラを初期化できません"
@@ -1306,7 +1299,8 @@ msgstr "不正なphase"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "不正なピン"
@@ -1686,6 +1680,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2597,10 +2592,6 @@ msgstr ""
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr ""
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr ""
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr "サブクラス化済みのクラスに特殊メソッドを追加できません"
@@ -3117,6 +3108,14 @@ msgstr ""
 msgid "identifier redefined as nonlocal"
 msgstr ""
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr ""
@@ -3237,6 +3236,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr "intervalは%s-%sの範囲でなければなりません"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "不正な引数"
@@ -3246,10 +3249,6 @@ msgstr "不正な引数"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "不正な証明書"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3280,10 +3279,6 @@ msgstr ""
 msgid "invalid hostname"
 msgstr "不正なホスト名"
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "不正な鍵"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "不正なmicropythonデコレータ"
@@ -4295,6 +4290,18 @@ msgstr "ziはfloat値でなければなりません"
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "破損した .mpy ファイル"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "破損したraw code"
+
+#~ msgid "invalid cert"
+#~ msgstr "不正な証明書"
+
+#~ msgid "invalid key"
+#~ msgstr "不正な鍵"
+
 #~ msgid "parameter annotation must be an identifier"
 #~ msgstr "引数アノテーションは識別子でなければなりません"
 

locale/ko.po

@@ -684,6 +684,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -736,14 +737,6 @@ msgid ""
 "connection."
 msgstr ""
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr ""
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr ""
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr ""
@@ -1296,7 +1289,8 @@ msgstr "단계가 잘못되었습니다"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "핀이 잘못되었습니다"
@@ -1674,6 +1668,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2578,10 +2573,6 @@ msgstr ""
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr ""
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr ""
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3094,6 +3085,14 @@ msgstr ""
 msgid "identifier redefined as nonlocal"
 msgstr ""
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr ""
@@ -3213,6 +3212,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -3222,10 +3225,6 @@ msgstr ""
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "cert가 유효하지 않습니다"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3256,10 +3255,6 @@ msgstr "형식 지정자(format specifier)가 유효하지 않습니다"
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "키가 유효하지 않습니다"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr ""
@@ -4268,6 +4263,12 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "invalid cert"
+#~ msgstr "cert가 유효하지 않습니다"
+
+#~ msgid "invalid key"
+#~ msgstr "키가 유효하지 않습니다"
+
 #~ msgid "bits must be 7, 8 or 9"
 #~ msgstr "비트(bits)는 7, 8 또는 9 여야합니다"
 

locale/nl.po

@@ -688,6 +688,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Kan de frequentie van een timer die al in gebruik is niet variëren"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -744,14 +745,6 @@ msgstr ""
 "Verbinding is verbroken en kan niet langer gebruikt worden. Creëer een "
 "nieuwe verbinding."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Corrupt .mpy bestand"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Corrupt raw code"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "Kon camera niet initialiseren"
@@ -1307,7 +1300,8 @@ msgstr "Ongeldige fase"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Ongeldige pin"
@@ -1691,6 +1685,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr "Slechts één alarm.time alarm kan worden ingesteld."
 
@@ -2625,10 +2620,6 @@ msgstr "kan slechts 4 parameters aan Thumb assembly geven"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "kan slechts 4 parameters aan Xtensa assembly geven"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "kan alleen byte-code opslaan"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr ""
@@ -3146,6 +3137,14 @@ msgstr "identifier is opnieuw gedefinieerd als global"
 msgid "identifier redefined as nonlocal"
 msgstr "identifier is opnieuw gedefinieerd als nonlocal"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "incompleet formaat"
@@ -3265,6 +3264,10 @@ msgstr "interp is gedefinieerd voor eendimensionale arrays van gelijke lengte"
 msgid "interval must be in range %s-%s"
 msgstr "interval moet binnen bereik %s-%s vallen"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "ongeldige argumenten"
@@ -3274,10 +3277,6 @@ msgstr "ongeldige argumenten"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "ongeldig certificaat"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3308,10 +3307,6 @@ msgstr "ongeldige formaatspecificatie"
 msgid "invalid hostname"
 msgstr "onjuiste hostnaam"
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "ongeldige sleutel"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "ongeldige micropython decorator"
@@ -4326,6 +4321,21 @@ msgstr "zi moet van type float zijn"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi moet vorm (n_section, 2) hebben"
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Corrupt .mpy bestand"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Corrupt raw code"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "kan alleen byte-code opslaan"
+
+#~ msgid "invalid cert"
+#~ msgstr "ongeldig certificaat"
+
+#~ msgid "invalid key"
+#~ msgstr "ongeldige sleutel"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Viper-functies ondersteunen momenteel niet meer dan 4 argumenten"
 

locale/pl.po

@@ -688,6 +688,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Nie można zmieniać częstotliwości timera, który jest już używany"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr ""
 
@@ -744,14 +745,6 @@ msgstr ""
 "Połączenie zostało rozłączone i nie można go już używać. Utwórz nowe "
 "połączenie."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Uszkodzony plik .mpy"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr ""
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr ""
@@ -1306,7 +1299,8 @@ msgstr "Zła faza"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Zła nóżka"
@@ -1684,6 +1678,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr ""
 
@@ -2593,10 +2588,6 @@ msgstr "asembler Thumb może przyjąć do 4 parameterów"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "asembler Xtensa może przyjąć do 4 parameterów"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "można zapisać tylko bytecode"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr "nie można dodać specjalnej metody do podklasy"
@@ -3110,6 +3101,14 @@ msgstr "nazwa przedefiniowana jako globalna"
 msgid "identifier redefined as nonlocal"
 msgstr "nazwa przedefiniowana jako nielokalna"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "niepełny format"
@@ -3229,6 +3228,10 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr "interwał musi mieścić się w zakresie %s-%s"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "złe arguemnty"
@@ -3238,10 +3241,6 @@ msgstr "złe arguemnty"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "zły ceryfikat"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr ""
@@ -3272,10 +3271,6 @@ msgstr "zła specyfikacja formatu"
 msgid "invalid hostname"
 msgstr ""
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "zły klucz"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "zły dekorator micropythona"
@@ -4286,6 +4281,18 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Uszkodzony plik .mpy"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "można zapisać tylko bytecode"
+
+#~ msgid "invalid cert"
+#~ msgstr "zły ceryfikat"
+
+#~ msgid "invalid key"
+#~ msgstr "zły klucz"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Funkcje Viper nie obsługują obecnie więcej niż 4 argumentów"
 

locale/pt_BR.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-25 18:43+0000\n"
+"PO-Revision-Date: 2021-04-28 16:11+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -705,6 +705,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Não é possível variar a frequência em um timer que já esteja em uso"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr "Não é possível acordar (wake) no pino edge. Nível apenas."
 
@@ -761,14 +762,6 @@ msgid ""
 msgstr ""
 "A conexão foi desconectada e não pode mais ser usada. Crie uma nova conexão."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Arquivo .mpy corrompido"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Código bruto corrompido"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "Não foi possível inicializar a Câmera"
@@ -1330,7 +1323,8 @@ msgstr "Fase Inválida"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Pino inválido"
@@ -1715,6 +1709,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Apenas um TouchAlarm pode ser colocado em deep sleep."
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr "Apenas um alarme alarm.time pode ser definido."
 
@@ -2658,10 +2653,6 @@ msgstr "só pode haver até 4 parâmetros para a montagem Thumb"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "só pode haver até 4 parâmetros para a montagem Xtensa"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "apenas o bytecode pode ser salvo"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr "não é possível adicionar o método especial à classe já subclassificada"
@@ -3183,6 +3174,14 @@ msgstr "o identificador foi redefinido como global"
 msgid "identifier redefined as nonlocal"
 msgstr "o identificador foi redefinido como não-local"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr "arquivo .mpy incompatível"
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr "arquivo .mpy com arquitetura nativa incompatível"
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "formato incompleto"
@@ -3303,6 +3302,10 @@ msgstr "o interp é definido para matrizes 1D de igual comprimento"
 msgid "interval must be in range %s-%s"
 msgstr "o intervalo deve estar entre %s-%s"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr "arquitetura inválida"
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "argumentos inválidos"
@@ -3312,10 +3315,6 @@ msgstr "argumentos inválidos"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr "bits_per_pixel %d é inválido, deve ser, 1, 4, 8, 16, 24, ou 32"
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "certificado inválido"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr "decorador inválido"
@@ -3346,10 +3345,6 @@ msgstr "o especificador do formato é inválido"
 msgid "invalid hostname"
 msgstr "o nome do host é inválido"
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "chave inválida"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "o decorador micropython é inválido"
@@ -4370,6 +4365,21 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Arquivo .mpy corrompido"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Código bruto corrompido"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "apenas o bytecode pode ser salvo"
+
+#~ msgid "invalid cert"
+#~ msgstr "certificado inválido"
+
+#~ msgid "invalid key"
+#~ msgstr "chave inválida"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Atualmente, as funções do Viper não suportam mais de 4 argumentos"
 

locale/sv.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-24 14:29+0000\n"
+"PO-Revision-Date: 2021-04-28 16:11+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -694,6 +694,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Det går inte att ändra frekvensen på en timer som redan används"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr "Kan inte vakna på nivåskift, enbart nivå."
 
@@ -750,14 +751,6 @@ msgstr ""
 "Anslutningen har kopplats bort och kan inte längre användas. Skapa en ny "
 "anslutning."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Skadad .mpy-fil"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Korrupt rå kod"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "Kunde inte initiera Camera"
@@ -1314,7 +1307,8 @@ msgstr "Ogiltig fas"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Ogiltig pinne"
@@ -1698,6 +1692,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Endast ett TouchAlarm kan ställas in för djupsömn."
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr "Endast ett alarm.time kan ställas in."
 
@@ -2628,10 +2623,6 @@ msgstr "kan bara ha upp till 4 parametrar för Thumbs assembly"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "kan bara ha upp till 4 parametrar att Xtensa assembly"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "kan bara spara bytecode"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr "kan inte lägga till särskild metod för redan subklassad klass"
@@ -3149,6 +3140,14 @@ msgstr "identifieraren omdefinierad till global"
 msgid "identifier redefined as nonlocal"
 msgstr "identifieraren omdefinierad som icke-lokal"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr "inkompatibel .mpy-fil"
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr "inkompatibel nativ .mpy-arkitektur"
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "ofullständigt format"
@@ -3268,6 +3267,10 @@ msgstr "interp är definierad för 1D-matriser med samma längd"
 msgid "interval must be in range %s-%s"
 msgstr "interval måste vara i intervallet %s-%s"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr "ogiltig arkitektur"
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "ogiltiga argument"
@@ -3277,10 +3280,6 @@ msgstr "ogiltiga argument"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr "ogiltig bits_per_pixel %d, måste vara 1, 4, 8, 16, 24 eller 32"
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "ogiltigt certifikat"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr "ogiltig dekorator"
@@ -3311,10 +3310,6 @@ msgstr "ogiltig formatspecificerare"
 msgid "invalid hostname"
 msgstr "Ogiltigt värdnamn"
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "ogiltig nyckel"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "ogiltig mikropython-dekorator"
@@ -4329,6 +4324,21 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Skadad .mpy-fil"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Korrupt rå kod"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "kan bara spara bytecode"
+
+#~ msgid "invalid cert"
+#~ msgstr "ogiltigt certifikat"
+
+#~ msgid "invalid key"
+#~ msgstr "ogiltig nyckel"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Viper-funktioner stöder för närvarande inte mer än fyra argument"
 

locale/zh_Latn_pinyin.po

@@ -695,6 +695,7 @@ msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Wúfǎ gēnggǎi yǐ zài shǐyòng de jìshí qì shàng de pínlǜ"
 
 #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
 msgid "Cannot wake on pin edge. Only level."
 msgstr "wú fǎ zài yǐn jiǎo biān yuán huàn xǐng. jǐn jí bié."
 
@@ -749,14 +750,6 @@ msgid ""
 "connection."
 msgstr "Liánjiē yǐ duàn kāi, wúfǎ zài shǐyòng. Chuàngjiàn yīgè xīn de liánjiē."
 
-#: py/persistentcode.c
-msgid "Corrupt .mpy file"
-msgstr "Fǔbài de .mpy wénjiàn"
-
-#: py/emitglue.c
-msgid "Corrupt raw code"
-msgstr "Sǔnhuài de yuánshǐ dàimǎ"
-
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
 msgstr "Wúfǎ chūshǐhuà xiàngjī"
@@ -1316,7 +1309,8 @@ msgstr "Jiēduàn wúxiào"
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
 #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c
-#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/touchio/TouchIn.c
+#: ports/nrf/common-hal/alarm/pin/PinAlarm.c shared-bindings/pwmio/PWMOut.c
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid pin"
 msgstr "Wúxiào de yǐn jiǎo"
@@ -1700,6 +1694,7 @@ msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "zhǐ yǒu yí gè chù mō bì kě yǐ shè zhì zài shēn dù shuì mián."
 
 #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 msgid "Only one alarm.time alarm can be set."
 msgstr "zhǐ néng shè zhì yí gè bào jǐng."
 
@@ -2626,10 +2621,6 @@ msgstr "zhǐyǒu Thumb zǔjiàn zuìduō 4 cānshù"
 msgid "can only have up to 4 parameters to Xtensa assembly"
 msgstr "zhǐyǒu Xtensa zǔjiàn zuìduō 4 cānshù"
 
-#: py/persistentcode.c
-msgid "can only save bytecode"
-msgstr "zhǐ néng bǎocún zì jié mǎ jìlù"
-
 #: py/objtype.c
 msgid "can't add special method to already-subclassed class"
 msgstr "wúfǎ tiānjiā tèshū fāngfǎ dào zi fēnlèi lèi"
@@ -3148,6 +3139,14 @@ msgstr "biāozhì fú chóngxīn dìngyì wèi quánjú"
 msgid "identifier redefined as nonlocal"
 msgstr "biāozhì fú chóngxīn dìngyì wéi fēi běndì"
 
+#: py/persistentcode.c
+msgid "incompatible .mpy file"
+msgstr ""
+
+#: py/persistentcode.c
+msgid "incompatible native .mpy architecture"
+msgstr ""
+
 #: py/objstr.c
 msgid "incomplete format"
 msgstr "géshì bù wánzhěng"
@@ -3267,6 +3266,10 @@ msgstr "interp shì wèi děng zhǎng de 1D shùzǔ dìngyì de"
 msgid "interval must be in range %s-%s"
 msgstr "Jiàngé bìxū zài %s-%s fànwéi nèi"
 
+#: py/compile.c
+msgid "invalid architecture"
+msgstr ""
+
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr "wúxiào de cānshù"
@@ -3276,10 +3279,6 @@ msgstr "wúxiào de cānshù"
 msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32"
 msgstr "wú xiào bits_per_pixel %d， bì xū shì, 1, 4, 8, 16, 24, huò 32"
 
-#: extmod/modussl_axtls.c
-msgid "invalid cert"
-msgstr "zhèngshū wúxiào"
-
 #: py/compile.c
 msgid "invalid decorator"
 msgstr "wú xiào zhuāng shì"
@@ -3310,10 +3309,6 @@ msgstr "wúxiào de géshì biāozhù"
 msgid "invalid hostname"
 msgstr "wú xiào zhǔ jī míng"
 
-#: extmod/modussl_axtls.c
-msgid "invalid key"
-msgstr "wúxiào de mì yào"
-
 #: py/compile.c
 msgid "invalid micropython decorator"
 msgstr "wúxiào de MicroPython zhuāngshì qì"
@@ -4325,6 +4320,21 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 
+#~ msgid "Corrupt .mpy file"
+#~ msgstr "Fǔbài de .mpy wénjiàn"
+
+#~ msgid "Corrupt raw code"
+#~ msgstr "Sǔnhuài de yuánshǐ dàimǎ"
+
+#~ msgid "can only save bytecode"
+#~ msgstr "zhǐ néng bǎocún zì jié mǎ jìlù"
+
+#~ msgid "invalid cert"
+#~ msgstr "zhèngshū wúxiào"
+
+#~ msgid "invalid key"
+#~ msgstr "wúxiào de mì yào"
+
 #~ msgid "Viper functions don't currently support more than 4 arguments"
 #~ msgstr "Viper hánshù mùqián bù zhīchí chāoguò 4 gè cānshù"
 

main.c

@@ -427,6 +427,7 @@ STATIC bool run_code_py(safe_mode_t safe_mode) {
             // it may also return due to another interrupt, that's why we check
             // for deep sleep alarms above. If it wasn't a deep sleep alarm,
             // then we'll idle here again.
+
             #if CIRCUITPY_ALARM
                 common_hal_alarm_pretending_deep_sleep();
             #else

ports/nrf/Makefile

@@ -94,6 +94,11 @@ else
   CFLAGS += -flto -flto-partition=none
 endif
 
+ifeq ($(NRF_DEBUG_PRINT), 1)
+  CFLAGS += -DNRF_DEBUG_PRINT=1
+  SRC_SUPERVISOR += supervisor/debug_uart.c
+endif
+
 # option to override compiler optimization level, set in boards/$(BOARD)/mpconfigboard.mk
 CFLAGS += $(OPTIMIZATION_FLAGS)
 

ports/nrf/boards/pca10100/mpconfigboard.mk

@@ -7,6 +7,7 @@ MCU_CHIP = nrf52833
 
 INTERNAL_FLASH_FILESYSTEM = 1
 
+CIRCUITPY_ALARM = 0
 CIRCUITPY_AUDIOMP3 = 0
 CIRCUITPY_BITBANGIO = 0
 CIRCUITPY_BITMAPTOOLS = 0

ports/nrf/boards/simmel/mpconfigboard.mk

@@ -10,6 +10,7 @@ MCU_CHIP = nrf52833
 
 INTERNAL_FLASH_FILESYSTEM = 1
 
+CIRCUITPY_ALARM = 0
 CIRCUITPY_AESIO = 1
 CIRCUITPY_AUDIOMP3 = 0
 CIRCUITPY_BITMAPTOOLS = 0
@@ -24,6 +25,8 @@ CIRCUITPY_MSGPACK = 0
 CIRCUITPY_NEOPIXEL_WRITE = 0
 CIRCUITPY_NVM = 0
 CIRCUITPY_PIXELBUF  = 0
+CIRCUITPY_PULSEIO = 0
+CIRCUITPY_PWMIO = 1
 CIRCUITPY_RGBMATRIX = 0
 CIRCUITPY_ROTARYIO = 0
 CIRCUITPY_RTC = 1

ports/nrf/common-hal/alarm/SleepMemory.c

@@ -0,0 +1,118 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Junji Sakai
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <string.h>
+#include "py/runtime.h"
+#include "common-hal/alarm/__init__.h"
+#include "common-hal/alarm/SleepMemory.h"
+#include "nrf_power.h"
+
+#ifdef NRF_DEBUG_PRINT
+extern void dbg_dump_RAMreg(void);
+#include "supervisor/serial.h" // dbg_printf()
+#endif
+
+__attribute__((section(".uninitialized"))) static uint8_t _sleepmem[SLEEP_MEMORY_LENGTH];
+__attribute__((section(".uninitialized"))) uint8_t sleepmem_wakeup_event;
+__attribute__((section(".uninitialized"))) uint8_t sleepmem_wakeup_pin;
+__attribute__((section(".uninitialized"))) static uint32_t _sleepmem_magicnum;
+#define SLEEP_MEMORY_DATA_GUARD 0xad0000af
+#define SLEEP_MEMORY_DATA_GUARD_MASK 0xff0000ff
+
+static int is_sleep_memory_valid(void) {
+    if ((_sleepmem_magicnum & SLEEP_MEMORY_DATA_GUARD_MASK)
+         == SLEEP_MEMORY_DATA_GUARD) {
+      return 1;
+    }
+    return 0;
+}
+
+void set_memory_retention(void) {
+    // set RAM[n].POWER register for RAM retention
+    // nRF52840 has RAM[0..7].Section[0..1] and RAM[8].Section[0..5]
+    // nRF52833 has RAM[0..7].Section[0..1] and RAM[8].Section[0,1]
+    for(int block = 0; block <= 7; ++block) {
+        nrf_power_rampower_mask_on(NRF_POWER, block,
+                   NRF_POWER_RAMPOWER_S0RETENTION_MASK |
+                   NRF_POWER_RAMPOWER_S1RETENTION_MASK);
+    };
+#ifdef NRF52840
+    nrf_power_rampower_mask_on(NRF_POWER, 8,
+                   NRF_POWER_RAMPOWER_S0RETENTION_MASK |
+                   NRF_POWER_RAMPOWER_S1RETENTION_MASK |
+                   NRF_POWER_RAMPOWER_S2RETENTION_MASK |
+                   NRF_POWER_RAMPOWER_S3RETENTION_MASK |
+                   NRF_POWER_RAMPOWER_S4RETENTION_MASK |
+                   NRF_POWER_RAMPOWER_S5RETENTION_MASK);
+#endif
+#ifdef NRF52833
+    nrf_power_rampower_mask_on(NRF_POWER, 8,
+                   NRF_POWER_RAMPOWER_S0RETENTION_MASK |
+                   NRF_POWER_RAMPOWER_S1RETENTION_MASK);
+#endif
+}
+
+static void initialize_sleep_memory(void) {
+    memset((uint8_t *)_sleepmem, 0, SLEEP_MEMORY_LENGTH);
+    sleepmem_wakeup_event = 0;
+    sleepmem_wakeup_pin   = 0;
+
+    set_memory_retention();
+#ifdef NRF_DEBUG_PRINT
+    //dbg_dump_RAMreg();
+#endif
+
+    _sleepmem_magicnum = SLEEP_MEMORY_DATA_GUARD;
+}
+
+void alarm_sleep_memory_reset(void) {
+    if (!is_sleep_memory_valid()) {
+        initialize_sleep_memory();
+#ifdef NRF_DEBUG_PRINT
+    dbg_printf("sleep memory initialized\r\n");
+#endif
+    }
+}
+
+uint32_t common_hal_alarm_sleep_memory_get_length(alarm_sleep_memory_obj_t *self) {
+    return sizeof(_sleepmem);
+}
+
+bool common_hal_alarm_sleep_memory_set_bytes(alarm_sleep_memory_obj_t *self, uint32_t start_index, const uint8_t* values, uint32_t len) {
+    if (start_index + len > sizeof(_sleepmem)) {
+        return false;
+    }
+
+    memcpy((uint8_t *) (_sleepmem + start_index), values, len);
+    return true;
+}
+
+void common_hal_alarm_sleep_memory_get_bytes(alarm_sleep_memory_obj_t *self, uint32_t start_index, uint8_t* values, uint32_t len) {
+    if (start_index + len > sizeof(_sleepmem)) {
+        return;
+    }
+    memcpy(values, (uint8_t *) (_sleepmem + start_index), len);
+}

ports/nrf/common-hal/alarm/SleepMemory.h

@@ -0,0 +1,41 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Junji Sakai
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM_SLEEPMEMORY_H
+#define MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM_SLEEPMEMORY_H
+
+#include "py/obj.h"
+
+#define SLEEP_MEMORY_LENGTH (256)
+
+typedef struct {
+    mp_obj_base_t base;
+} alarm_sleep_memory_obj_t;
+
+extern void set_memory_retention(void);
+extern void alarm_sleep_memory_reset(void);
+
+#endif // MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM_SLEEPMEMORY_H

ports/nrf/common-hal/alarm/__init__.c

@@ -0,0 +1,349 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ * Copyright (c) 2020 Dan Halbert for Adafruit Industries
+ * Copyright (c) 2021 Junji Sakai
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/gc.h"
+#include "py/obj.h"
+#include "py/objtuple.h"
+#include "py/runtime.h"
+#include <stdio.h>
+#include <string.h>
+
+#include "shared-bindings/alarm/__init__.h"
+#include "shared-bindings/alarm/SleepMemory.h"
+#include "shared-bindings/alarm/pin/PinAlarm.h"
+#include "shared-bindings/alarm/time/TimeAlarm.h"
+#include "shared-bindings/alarm/touch/TouchAlarm.h"
+#include "shared-bindings/time/__init__.h"
+
+#include "supervisor/port.h"
+#include "supervisor/serial.h"  // serial_connected()
+#ifdef NRF_DEBUG_PRINT
+#include "supervisor/serial.h" // dbg_printf()
+extern int dbg_check_RTCprescaler(void);
+#endif
+#include "supervisor/qspi_flash.h"
+
+#include "nrf.h"
+#include "nrf_power.h"
+#include "nrfx.h"
+#include "nrfx_gpiote.h"
+
+// Singleton instance of SleepMemory.
+const alarm_sleep_memory_obj_t alarm_sleep_memory_obj = {
+    .base = {
+        .type = &alarm_sleep_memory_type,
+    },
+};
+
+void alarm_reset(void) {
+    alarm_sleep_memory_reset();
+    alarm_pin_pinalarm_reset();
+    alarm_time_timealarm_reset();
+    alarm_touch_touchalarm_reset();
+}
+
+extern uint32_t reset_reason_saved;
+STATIC nrf_sleep_source_t _get_wakeup_cause(void) {
+    if (alarm_pin_pinalarm_woke_us_up()) {
+        return NRF_SLEEP_WAKEUP_GPIO;
+    }
+    if (alarm_time_timealarm_woke_us_up()) {
+        return NRF_SLEEP_WAKEUP_TIMER;
+    }
+    if (alarm_touch_touchalarm_woke_us_up()) {
+        return NRF_SLEEP_WAKEUP_TOUCHPAD;
+    }
+    if (reset_reason_saved & NRF_POWER_RESETREAS_RESETPIN_MASK) {
+        return NRF_SLEEP_WAKEUP_RESETPIN;
+    }
+    else if (reset_reason_saved & NRF_POWER_RESETREAS_OFF_MASK) {
+        return NRF_SLEEP_WAKEUP_GPIO;
+    }
+    else if (reset_reason_saved & NRF_POWER_RESETREAS_VBUS_MASK) {
+        return NRF_SLEEP_WAKEUP_VBUS;
+    }
+    return NRF_SLEEP_WAKEUP_UNDEFINED;
+}
+
+#ifdef NRF_DEBUG_PRINT
+static const char* cause_str[] = {
+  "UNDEFINED",
+  "GPIO",
+  "TIMER",
+  "TOUCHPAD",
+  "VBUS",
+  "RESETPIN",
+};
+void print_wakeup_cause(nrf_sleep_source_t cause) {
+    if (cause >= 0 && cause < NRF_SLEEP_WAKEUP_ZZZ) {
+        dbg_printf("wakeup cause = NRF_SLEEP_WAKEUP_%s\r\n",
+           cause_str[(int)cause]);
+    }
+}
+#endif
+
+bool common_hal_alarm_woken_from_sleep(void) {
+   nrf_sleep_source_t cause = _get_wakeup_cause();
+#ifdef NRF_DEBUG_PRINT
+   if (cause != NRF_SLEEP_WAKEUP_UNDEFINED) {
+       //print_wakeup_cause(cause);
+   }
+#endif
+   return (cause == NRF_SLEEP_WAKEUP_GPIO || cause == NRF_SLEEP_WAKEUP_TIMER
+       || cause == NRF_SLEEP_WAKEUP_TOUCHPAD);
+}
+
+STATIC mp_obj_t _get_wake_alarm(size_t n_alarms, const mp_obj_t *alarms) {
+    nrf_sleep_source_t cause = _get_wakeup_cause();
+    switch (cause) {
+        case NRF_SLEEP_WAKEUP_TIMER: {
+            return alarm_time_timealarm_get_wakeup_alarm(n_alarms, alarms);
+        }
+        case NRF_SLEEP_WAKEUP_TOUCHPAD: {
+            return alarm_touch_touchalarm_get_wakeup_alarm(n_alarms, alarms);
+        }
+        case NRF_SLEEP_WAKEUP_GPIO: {
+            return alarm_pin_pinalarm_get_wakeup_alarm(n_alarms, alarms);
+        }
+        default:
+        break;
+    }
+    return mp_const_none;
+}
+
+mp_obj_t common_hal_alarm_get_wake_alarm(void) {
+    mp_obj_t obj = _get_wake_alarm(0, NULL);
+    return obj;
+}
+
+// Set up light sleep or deep sleep alarms.
+STATIC void _setup_sleep_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms) {
+    alarm_pin_pinalarm_set_alarms(deep_sleep, n_alarms, alarms);
+    alarm_time_timealarm_set_alarms(deep_sleep, n_alarms, alarms);
+    alarm_touch_touchalarm_set_alarm(deep_sleep, n_alarms, alarms);
+}
+
+// TODO: this handles all possible types of wakeup, which is redundant with main.
+// revise to extract all parts essential to enabling sleep wakeup, but leave the
+// alarm/non-alarm sorting to the existing main loop.
+void system_on_idle_until_alarm(int64_t timediff_ms, uint32_t prescaler) {
+    bool have_timeout = false;
+    uint64_t start_tick = 0, end_tick = 0;
+    int64_t tickdiff;
+
+#if defined(MICROPY_QSPI_CS)
+    qspi_flash_enter_sleep();
+#endif
+
+    if (timediff_ms != -1) {
+        have_timeout = true;
+#if 0
+    int64_t now = common_hal_time_monotonic_ms();
+    dbg_printf("now_ms=%ld timediff_ms=%ld\r\n", (long)now, (long)timediff_ms);
+#endif
+    if (timediff_ms < 0)  timediff_ms = 0;
+    if (prescaler == 0) {
+        // 1 tick = 1/1024 sec = 1000/1024 ms
+        // -> 1 ms = 1024/1000 ticks
+        tickdiff = (mp_uint_t)(timediff_ms * 1024 / 1000); // ms -> ticks
+    }
+    else {
+        // 1 tick = prescaler/1024 sec = prescaler*1000/1024 ms
+        // -> 1ms = 1024/(1000*prescaler) ticks
+        tickdiff = (mp_uint_t)(timediff_ms * 1024 / (1000 * prescaler));
+    }
+    start_tick = port_get_raw_ticks(NULL);
+    end_tick = start_tick + tickdiff;
+    }
+#if 0
+    dbg_printf("start_tick=%ld end_tick=%ld have_timeout=%c\r\n", (long)start_tick, (long)end_tick, have_timeout ? 'T' : 'F');
+#endif
+
+    int64_t remaining;
+    sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_NONE;
+    sleepmem_wakeup_pin   = WAKEUP_PIN_UNDEF;
+
+#ifdef NRF_DEBUG_PRINT
+    int ct = 40;
+    char reason = '?';
+#define WAKEUP_REASON(x) reason = (x)
+#else
+#define WAKEUP_REASON(x)
+#endif
+
+    while(1) {
+        if (mp_hal_is_interrupted()) {
+            WAKEUP_REASON('I');
+            break;
+        }
+        if (serial_connected() && serial_bytes_available()) {
+            WAKEUP_REASON('S');
+            break;
+        }
+        RUN_BACKGROUND_TASKS;
+        if (common_hal_alarm_woken_from_sleep()) {
+            WAKEUP_REASON('W');
+            break;
+        }
+        if (have_timeout) {
+            remaining = end_tick - port_get_raw_ticks(NULL);
+            // We break a bit early so we don't risk setting the alarm before the time when we call
+            // sleep.
+            if (remaining < 1) {
+                WAKEUP_REASON('t');
+                break;
+            }
+            port_interrupt_after_ticks(remaining);
+        }
+        // Idle until an interrupt happens.
+        port_idle_until_interrupt();
+#ifdef NRF_DEBUG_PRINT
+        if (ct > 0) {
+            dbg_printf("_");
+            --ct;
+        }
+#endif
+        if (have_timeout) {
+            remaining = end_tick - port_get_raw_ticks(NULL);
+            if (remaining <= 0) {
+                sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_TIMER;
+                WAKEUP_REASON('T');
+                break;
+            }
+        }
+    }
+#ifdef NRF_DEBUG_PRINT
+    dbg_printf("%c\r\n", reason);
+#endif
+
+#if defined(MICROPY_QSPI_CS)
+    qspi_flash_exit_sleep();
+#endif
+
+#ifdef NRF_DEBUG_PRINT
+    tickdiff = port_get_raw_ticks(NULL) - start_tick;
+    double sec;
+    if (prescaler == 0) {
+        sec = (double)tickdiff / 1024;
+    }
+    else {
+        sec = (double)(tickdiff * prescaler) / 1024;
+    }
+    dbg_printf("lapse %6.1f sec\r\n", sec);
+#endif
+}
+
+mp_obj_t common_hal_alarm_light_sleep_until_alarms(size_t n_alarms, const mp_obj_t *alarms) {
+    mp_obj_t wake_alarm;
+    alarm_time_timealarm_clear_wakeup_time();
+    _setup_sleep_alarms(false, n_alarms, alarms);
+
+#ifdef NRF_DEBUG_PRINT
+    dbg_printf("\r\nlight sleep...");
+#endif
+
+    int64_t timediff_ms = alarm_time_timealarm_get_wakeup_timediff_ms();
+    system_on_idle_until_alarm(timediff_ms, 0);
+
+    if (mp_hal_is_interrupted()) {
+        wake_alarm = mp_const_none;
+    }
+    else {
+        wake_alarm = _get_wake_alarm(n_alarms, alarms);
+    }
+    alarm_reset();
+    return wake_alarm;
+}
+
+void common_hal_alarm_set_deep_sleep_alarms(size_t n_alarms, const mp_obj_t *alarms) {
+    alarm_time_timealarm_clear_wakeup_time();
+    _setup_sleep_alarms(true, n_alarms, alarms);
+}
+
+#define PRESCALER_VALUE_IN_DEEP_SLEEP (1024)
+
+void NORETURN common_hal_alarm_enter_deep_sleep(void) {
+    alarm_pin_pinalarm_prepare_for_deep_sleep();
+    alarm_time_timealarm_prepare_for_deep_sleep();
+
+#ifdef NRF_DEBUG_PRINT
+    dbg_printf("\r\ndeep sleep...");
+#endif
+    int64_t timediff_ms = alarm_time_timealarm_get_wakeup_timediff_ms();
+    tick_set_prescaler(PRESCALER_VALUE_IN_DEEP_SLEEP -1);
+#ifdef NRF_DEBUG_PRINT
+    dbg_check_RTCprescaler(); //XXX
+#endif
+    system_on_idle_until_alarm(timediff_ms, PRESCALER_VALUE_IN_DEEP_SLEEP);
+
+#ifdef NRF_DEBUG_PRINT
+    dbg_printf("RESET...\r\n\r\n");
+#endif
+
+    reset_cpu();
+
+    // should not reach here..
+    while(1) ;
+}
+
+// old version deep sleep code that was used in common_hal_alarm_enter_deep_sleep()
+//   for anyone who might want true System OFF sleep ..
+#if 0
+void OLD_go_system_off(void) {
+    sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_NONE;
+    sleepmem_wakeup_pin   = WAKEUP_PIN_UNDEF;
+    uint8_t sd_enabled;
+    sd_softdevice_is_enabled(&sd_enabled);
+    set_memory_retention();
+    dbg_printf("OLD go system off.. %d\r\n", sd_enabled);
+    if (sd_enabled) {
+        sd_power_system_off();
+    }
+    else {
+        NRF_POWER->SYSTEMOFF = 1;
+    }
+}
+#endif
+
+void common_hal_alarm_pretending_deep_sleep(void) {
+    alarm_pin_pinalarm_prepare_for_deep_sleep();
+    alarm_time_timealarm_prepare_for_deep_sleep();
+
+#ifdef NRF_DEBUG_PRINT
+    dbg_printf("\r\npretending to deep sleep...");
+#endif
+
+    int64_t timediff_ms = alarm_time_timealarm_get_wakeup_timediff_ms();
+    system_on_idle_until_alarm(timediff_ms, 0);
+
+    alarm_reset();
+}
+
+void common_hal_alarm_gc_collect(void) {
+    gc_collect_ptr(shared_alarm_get_wake_alarm());
+}

ports/nrf/common-hal/alarm/__init__.h

@@ -0,0 +1,56 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Dan Halbert for Adafruit Industries.
+ * Copyright (c) 2021 Junji Sakai
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM__INIT__H
+#define MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM__INIT__H
+
+#include "common-hal/alarm/SleepMemory.h"
+
+typedef enum {
+    NRF_SLEEP_WAKEUP_UNDEFINED,
+    NRF_SLEEP_WAKEUP_GPIO,
+    NRF_SLEEP_WAKEUP_TIMER,
+    NRF_SLEEP_WAKEUP_TOUCHPAD,
+    NRF_SLEEP_WAKEUP_VBUS,
+    NRF_SLEEP_WAKEUP_RESETPIN,
+    NRF_SLEEP_WAKEUP_ZZZ
+} nrf_sleep_source_t;
+
+extern const alarm_sleep_memory_obj_t alarm_sleep_memory_obj;
+
+enum {
+    SLEEPMEM_WAKEUP_BY_NONE  = 0,
+    SLEEPMEM_WAKEUP_BY_PIN   = 1,
+    SLEEPMEM_WAKEUP_BY_TIMER = 2,
+};
+#define WAKEUP_PIN_UNDEF 0xFF
+extern uint8_t sleepmem_wakeup_event;
+extern uint8_t sleepmem_wakeup_pin;
+
+extern void alarm_reset(void);
+
+#endif // MICROPY_INCLUDED_NRF_COMMON_HAL_ALARM__INIT__H

ports/nrf/common-hal/alarm/pin/PinAlarm.c

@@ -0,0 +1,242 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Dan Halbert for Adafruit Industries
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ * Copyright (c) 2021 Junji Sakai
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/runtime.h"
+#include <stdio.h>
+#include <assert.h>
+
+#include "shared-bindings/alarm/pin/PinAlarm.h"
+#include "shared-bindings/microcontroller/__init__.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "common-hal/alarm/__init__.h"
+
+#include "nrfx.h"
+#include "nrf_gpio.h"
+#include "nrfx_gpiote.h"
+#include "nrf_soc.h"
+#include <string.h>
+
+#include "supervisor/serial.h"  // dbg_print
+
+#define WPIN_UNUSED 0xFF
+volatile char _pinhandler_gpiote_count;
+static bool pins_configured = false;
+
+extern uint32_t reset_reason_saved;
+extern void dbg_dump_GPIOregs(void);
+
+void common_hal_alarm_pin_pinalarm_construct(alarm_pin_pinalarm_obj_t *self, mcu_pin_obj_t *pin, bool value, bool edge, bool pull) {
+    if (edge) {
+        mp_raise_ValueError(translate("Cannot wake on pin edge. Only level."));
+    }
+    if (pin->number >= NUMBER_OF_PINS) {
+        mp_raise_ValueError(translate("Invalid pin"));
+    }
+    self->pin = pin;
+    self->value = value;
+    self->pull = pull;
+}
+
+mcu_pin_obj_t *common_hal_alarm_pin_pinalarm_get_pin(alarm_pin_pinalarm_obj_t *self) {
+    return self->pin;
+}
+
+bool common_hal_alarm_pin_pinalarm_get_value(alarm_pin_pinalarm_obj_t *self) {
+    return self->value;
+}
+
+bool common_hal_alarm_pin_pinalarm_get_edge(alarm_pin_pinalarm_obj_t *self) {
+    return false;
+}
+
+bool common_hal_alarm_pin_pinalarm_get_pull(alarm_pin_pinalarm_obj_t *self) {
+    return self->pull;
+}
+
+
+static void pinalarm_gpiote_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) {
+    ++_pinhandler_gpiote_count;
+    sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_PIN;
+    sleepmem_wakeup_pin   = pin & 0xFF;
+}
+
+bool alarm_pin_pinalarm_woke_us_up(void) {
+    return (sleepmem_wakeup_event == SLEEPMEM_WAKEUP_BY_PIN &&
+        sleepmem_wakeup_pin != WAKEUP_PIN_UNDEF);
+}
+
+mp_obj_t alarm_pin_pinalarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *alarms) {
+    // First, check to see if we match any given alarms.
+    for (size_t i = 0; i < n_alarms; i++) {
+        if (!mp_obj_is_type(alarms[i], &alarm_pin_pinalarm_type)) {
+            continue;
+        }
+        alarm_pin_pinalarm_obj_t *alarm  = MP_OBJ_TO_PTR(alarms[i]);
+    if (alarm->pin->number == sleepmem_wakeup_pin) {
+            return alarms[i];
+        }
+    }
+    alarm_pin_pinalarm_obj_t *alarm = m_new_obj(alarm_pin_pinalarm_obj_t);
+    alarm->base.type = &alarm_pin_pinalarm_type;
+    alarm->pin = NULL;
+    // Map the pin number back to a pin object.
+    for (size_t i = 0; i < mcu_pin_globals.map.used; i++) {
+        const mcu_pin_obj_t* pin_obj = MP_OBJ_TO_PTR(mcu_pin_globals.map.table[i].value);
+        if ((size_t) pin_obj->number == sleepmem_wakeup_pin) {
+            alarm->pin = mcu_pin_globals.map.table[i].value;
+            break;
+        }
+    }
+    return alarm;
+}
+
+// These must be static because we need to configure pulls later, right before
+// deep sleep.
+static uint64_t high_alarms = 0;
+static uint64_t low_alarms = 0;
+static uint64_t pull_pins = 0;
+
+void alarm_pin_pinalarm_reset(void) {
+    for (size_t i = 0; i < 64; i++) {
+        uint64_t mask = 1ull << i;
+        bool high = (high_alarms & mask) != 0;
+        bool low = (low_alarms & mask) != 0;
+        if (!(high || low)) {
+            continue;
+        }
+        reset_pin_number(i);
+    nrfx_gpiote_in_event_disable((nrfx_gpiote_pin_t)i);
+    nrfx_gpiote_in_uninit((nrfx_gpiote_pin_t)i);
+    }
+
+    high_alarms = 0;
+    low_alarms = 0;
+    pull_pins = 0;
+}
+
+static void configure_pins_for_sleep(void) {
+    nrfx_err_t err;
+    if ( nrfx_gpiote_is_init() ) {
+        nrfx_gpiote_uninit();
+    }
+    err = nrfx_gpiote_init(NRFX_GPIOTE_CONFIG_IRQ_PRIORITY);
+    assert(err == NRFX_SUCCESS);
+    (void)err; // to suppress unused warning
+
+    _pinhandler_gpiote_count = 0;
+
+    nrfx_gpiote_in_config_t cfg = {
+        .sense = NRF_GPIOTE_POLARITY_TOGGLE,
+        .pull = NRF_GPIO_PIN_PULLUP,
+        .is_watcher = false,
+        .hi_accuracy = true,
+        .skip_gpio_setup = false
+    };
+    for(size_t i = 0; i < 64; ++i) {
+        uint64_t mask = 1ull << i;
+        if (((high_alarms & mask) == 0) && ((low_alarms & mask) == 0)) {
+            continue;
+        }
+        if (((high_alarms & mask) != 0) && ((low_alarms & mask) == 0)) {
+            cfg.sense = NRF_GPIOTE_POLARITY_LOTOHI;
+            cfg.pull = ((pull_pins & mask) != 0) ?
+                        NRF_GPIO_PIN_PULLDOWN : NRF_GPIO_PIN_NOPULL;
+        }
+        else
+        if (((high_alarms & mask) == 0) && ((low_alarms & mask) != 0)) {
+            cfg.sense = NRF_GPIOTE_POLARITY_HITOLO;
+            cfg.pull = ((pull_pins & mask) != 0) ?
+                        NRF_GPIO_PIN_PULLUP : NRF_GPIO_PIN_NOPULL;
+        }
+        else {
+            cfg.sense = NRF_GPIOTE_POLARITY_TOGGLE;
+            cfg.pull = NRF_GPIO_PIN_NOPULL;
+        }
+        err = nrfx_gpiote_in_init((nrfx_gpiote_pin_t)i, &cfg,
+                  pinalarm_gpiote_handler);
+    assert(err == NRFX_SUCCESS);
+        nrfx_gpiote_in_event_enable((nrfx_gpiote_pin_t)i, true);
+        if (((high_alarms & mask) != 0) && ((low_alarms & mask) == 0)) {
+            nrf_gpio_cfg_sense_set((uint32_t)i, NRF_GPIO_PIN_SENSE_HIGH);
+    }
+        if (((high_alarms & mask) == 0) && ((low_alarms & mask) != 0)) {
+            nrf_gpio_cfg_sense_set((uint32_t)i, NRF_GPIO_PIN_SENSE_LOW);
+    }
+    }
+}
+
+void alarm_pin_pinalarm_set_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms) {
+    // Bitmask of wake up settings.
+    size_t high_count = 0;
+    size_t low_count = 0;
+    int pin_number = -1;
+
+    for (size_t i = 0; i < n_alarms; i++) {
+        if (!mp_obj_is_type(alarms[i], &alarm_pin_pinalarm_type)) {
+            continue;
+        }
+        alarm_pin_pinalarm_obj_t *alarm  = MP_OBJ_TO_PTR(alarms[i]);
+
+        pin_number = alarm->pin->number;
+    //dbg_printf("alarm_pin_pinalarm_set_alarms(pin#=%d, val=%d, pull=%d)\r\n", pin_number, alarm->value, alarm->pull);
+        if (alarm->value) {
+            high_alarms |= 1ull << pin_number;
+            high_count++;
+        } else {
+            low_alarms |= 1ull << pin_number;
+            low_count++;
+        }
+        if (alarm->pull) {
+            pull_pins |= 1ull << pin_number;
+        }
+    }
+    if (pin_number != -1) {
+        if (!deep_sleep) {
+            configure_pins_for_sleep();
+        }
+        else {
+            // we don't setup gpio HW here but do them in
+            // alarm_pin_pinalarm_prepare_for_deep_sleep() below
+        reset_reason_saved = 0;
+        pins_configured = false;
+        }
+    }
+    else {
+        //dbg_printf("alarm_pin_pinalarm_set_alarms() no valid pins\r\n");
+    }
+}
+
+void alarm_pin_pinalarm_prepare_for_deep_sleep(void) {
+    if (!pins_configured) {
+        configure_pins_for_sleep();
+    pins_configured = true;
+#ifdef NRF_DEBUG_PRINT
+    //dbg_dump_GPIOregs();
+#endif
+    }
+}

ports/nrf/common-hal/alarm/pin/PinAlarm.h

@@ -0,0 +1,41 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Junji Sakai
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/obj.h"
+#include "py/objtuple.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    mcu_pin_obj_t *pin;
+    bool value;
+    bool pull;
+} alarm_pin_pinalarm_obj_t;
+
+void alarm_pin_pinalarm_reset(void);
+void alarm_pin_pinalarm_set_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms);
+void alarm_pin_pinalarm_prepare_for_deep_sleep(void);
+mp_obj_t alarm_pin_pinalarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *alarms);
+bool alarm_pin_pinalarm_woke_us_up(void);

ports/nrf/common-hal/alarm/time/TimeAlarm.c

@@ -0,0 +1,102 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Dan Halbert for Adafruit Industries
+ * Copyright (c) 2021 Junji Sakai
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/runtime.h"
+#include <stdio.h>
+
+#include "common-hal/alarm/__init__.h"
+#include "shared-bindings/alarm/time/TimeAlarm.h"
+#include "shared-bindings/time/__init__.h"
+
+void common_hal_alarm_time_timealarm_construct(alarm_time_timealarm_obj_t *self, mp_float_t monotonic_time) {
+    self->monotonic_time = monotonic_time;
+}
+
+mp_float_t common_hal_alarm_time_timealarm_get_monotonic_time(alarm_time_timealarm_obj_t *self) {
+    return self->monotonic_time;
+}
+
+mp_obj_t alarm_time_timealarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *alarms) {
+    // First, check to see if we match
+    for (size_t i = 0; i < n_alarms; i++) {
+        if (mp_obj_is_type(alarms[i], &alarm_time_timealarm_type)) {
+            return alarms[i];
+        }
+    }
+    alarm_time_timealarm_obj_t *timer = m_new_obj(alarm_time_timealarm_obj_t);
+    timer->base.type = &alarm_time_timealarm_type;
+    // TODO: Set monotonic_time based on the RTC state.
+    timer->monotonic_time = 0.0f;
+    return timer;
+}
+
+bool alarm_time_timealarm_woke_us_up(void) {
+  return sleepmem_wakeup_event == SLEEPMEM_WAKEUP_BY_TIMER;
+}
+
+int64_t wakeup_time_saved =0;
+
+int64_t alarm_time_timealarm_get_wakeup_timediff_ms(void) {
+    if (wakeup_time_saved == 0) {
+        return -1;
+    }
+    return wakeup_time_saved - common_hal_time_monotonic_ms();
+}
+
+void alarm_time_timealarm_clear_wakeup_time(void) {
+    wakeup_time_saved = 0;
+}
+
+void alarm_time_timealarm_reset(void) {
+    port_disable_interrupt_after_ticks_ch(1);
+    wakeup_time_saved = 0;
+}
+
+void alarm_time_timealarm_set_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms) {
+    bool timealarm_set = false;
+    alarm_time_timealarm_obj_t *timealarm = MP_OBJ_NULL;
+    wakeup_time_saved = 0;
+
+    for (size_t i = 0; i < n_alarms; i++) {
+        if (!mp_obj_is_type(alarms[i], &alarm_time_timealarm_type)) {
+            continue;
+        }
+        if (timealarm_set) {
+            mp_raise_ValueError(translate("Only one alarm.time alarm can be set."));
+        }
+        timealarm  = MP_OBJ_TO_PTR(alarms[i]);
+        timealarm_set = true;
+    }
+    if (!timealarm_set) {
+        return;
+    }
+
+    wakeup_time_saved = (int64_t)(timealarm->monotonic_time * 1000.0f);
+}
+
+void alarm_time_timealarm_prepare_for_deep_sleep(void) {
+}

ports/nrf/common-hal/alarm/time/TimeAlarm.h

@@ -0,0 +1,50 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Junji Sakai
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+#include "py/obj.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    mp_float_t monotonic_time;      // values compatible with time.monotonic_time()
+} alarm_time_timealarm_obj_t;
+
+extern volatile int rtc_woke_up_counter;
+extern void port_disable_interrupt_after_ticks_ch(uint32_t channel);
+extern void port_interrupt_after_ticks_ch(uint32_t channel, uint32_t ticks);
+
+// Find the alarm object that caused us to wake up or create an equivalent one.
+mp_obj_t alarm_time_timealarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *alarms);
+// Check for the wake up alarm from pretend deep sleep.
+bool alarm_time_timealarm_woke_us_up(void);
+void alarm_time_timealarm_set_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms);
+void alarm_time_timealarm_reset(void);
+
+extern void alarm_time_timealarm_prepare_for_deep_sleep(void);
+extern int64_t alarm_time_timealarm_get_wakeup_timediff_ms(void);
+extern void alarm_time_timealarm_clear_wakeup_time(void);
+extern void dbg_dump_RTCreg(void);
+extern void tick_set_prescaler(uint32_t prescaler_val);

ports/nrf/common-hal/alarm/touch/TouchAlarm.c

@@ -0,0 +1,53 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 microDev
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/runtime.h"
+#include "shared-bindings/alarm/touch/TouchAlarm.h"
+#include "shared-bindings/microcontroller/__init__.h"
+
+//static volatile bool woke_up = false;
+
+void common_hal_alarm_touch_touchalarm_construct(alarm_touch_touchalarm_obj_t *self, const mcu_pin_obj_t *pin) {
+    mp_raise_NotImplementedError(NULL);
+    (void)pin;
+}
+
+mp_obj_t alarm_touch_touchalarm_get_wakeup_alarm(const size_t n_alarms, const mp_obj_t *alarms) {
+    return mp_const_none;
+}
+
+void alarm_touch_touchalarm_set_alarm(const bool deep_sleep, const size_t n_alarms, const mp_obj_t *alarms) {
+}
+
+void alarm_touch_touchalarm_prepare_for_deep_sleep(void) {
+}
+
+bool alarm_touch_touchalarm_woke_us_up(void) {
+    return false;
+}
+
+void alarm_touch_touchalarm_reset(void) {
+}

ports/nrf/common-hal/alarm/touch/TouchAlarm.h

@@ -0,0 +1,46 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 microDev
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_COMMON_HAL_ALARM_TOUCH_TOUCHALARM_H
+#define MICROPY_INCLUDED_COMMON_HAL_ALARM_TOUCH_TOUCHALARM_H
+
+#include "py/obj.h"
+#include "common-hal/microcontroller/Pin.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    const mcu_pin_obj_t *pin;
+} alarm_touch_touchalarm_obj_t;
+
+// Find the alarm object that caused us to wake up or create an equivalent one.
+mp_obj_t alarm_touch_touchalarm_get_wakeup_alarm(const size_t n_alarms, const mp_obj_t *alarms);
+// Check for the wake up alarm from pretend deep sleep.
+void alarm_touch_touchalarm_set_alarm(const bool deep_sleep, const size_t n_alarms, const mp_obj_t *alarms);
+void alarm_touch_touchalarm_prepare_for_deep_sleep(void);
+bool alarm_touch_touchalarm_woke_us_up(void);
+void alarm_touch_touchalarm_reset(void);
+
+#endif  // MICROPY_INCLUDED_COMMON_HAL_ALARM_TOUCH_TOUCHALARM_H

ports/nrf/common-hal/microcontroller/Processor.c

@@ -127,5 +127,24 @@ void common_hal_mcu_processor_get_uid(uint8_t raw_id[]) {
 }
 
 mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) {
-    return RESET_REASON_UNKNOWN;
+    mcu_reset_reason_t r = RESET_REASON_UNKNOWN;
+    if (reset_reason_saved == 0) {
+      r = RESET_REASON_POWER_ON;
+    }
+    else if (reset_reason_saved & POWER_RESETREAS_RESETPIN_Msk) {
+      r = RESET_REASON_RESET_PIN;
+    }
+    else if (reset_reason_saved & POWER_RESETREAS_DOG_Msk) {
+      r = RESET_REASON_WATCHDOG;
+    }
+    else if (reset_reason_saved & POWER_RESETREAS_SREQ_Msk) {
+      r = RESET_REASON_SOFTWARE;
+    }
+    else if ((reset_reason_saved & POWER_RESETREAS_OFF_Msk) ||
+         (reset_reason_saved & POWER_RESETREAS_LPCOMP_Msk) ||
+         (reset_reason_saved & POWER_RESETREAS_NFC_Msk) ||
+         (reset_reason_saved & POWER_RESETREAS_VBUS_Msk))  {
+      r = RESET_REASON_DEEP_SLEEP_ALARM;
+    }
+    return r;
 }

ports/nrf/common-hal/microcontroller/Processor.h

@@ -36,4 +36,6 @@ typedef struct {
     // Stores no state currently.
 } mcu_processor_obj_t;
 
+extern uint32_t reset_reason_saved;
+
 #endif // MICROPY_INCLUDED_NRF_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H

ports/nrf/mpconfigport.mk

@@ -46,6 +46,9 @@ CIRCUITPY_FRAMEBUFFERIO ?= 1
 CIRCUITPY_COUNTIO ?= 1
 CIRCUITPY_WATCHDOG ?= 1
 
+# Sleep and Wakeup
+CIRCUITPY_ALARM ?= 1
+
 # nRF52840-specific
 
 ifeq ($(MCU_CHIP),nrf52840)

ports/nrf/nrfx_config.h

@@ -116,7 +116,7 @@
 
 // GPIO interrupt
 #define NRFX_GPIOTE_ENABLED 1
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
+#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 2
 #define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
 
 // NVM controller

ports/nrf/supervisor/debug_uart.c

@@ -0,0 +1,234 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Jun2Sak
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdint.h>
+#include <string.h>
+
+#ifdef NRF_DEBUG_PRINT
+
+#define DEBUG_UART_TXPIN 26
+#define DEBUG_UART_RXPIN 15
+
+#include "nrfx.h"
+#include "nrf_uart.h"
+#include "nrf_gpio.h"
+#include "nrf_rtc.h"
+#include "nrfx_uarte.h"
+#include "nrfx_rtc.h"
+#include "supervisor/serial.h" // dbg_printf()
+#include "shared-bindings/microcontroller/Processor.h"
+#include "common-hal/alarm/__init__.h"
+
+extern const nrfx_rtc_t rtc_instance;    // port.c
+extern uint32_t reset_reason_saved;
+
+const nrfx_uarte_t _dbg_uart_inst = NRFX_UARTE_INSTANCE(1);
+static int _dbg_uart_initialized = 0;
+#define DBG_PBUF_LEN 80
+static char _dbg_pbuf[DBG_PBUF_LEN+1];
+
+void _debug_uart_uninit(void) {
+    nrf_gpio_cfg(DEBUG_UART_TXPIN,
+         NRF_GPIO_PIN_DIR_INPUT,
+         NRF_GPIO_PIN_INPUT_DISCONNECT,
+         NRF_GPIO_PIN_NOPULL,
+         NRF_GPIO_PIN_S0S1,
+         NRF_GPIO_PIN_NOSENSE);
+    nrfx_uarte_uninit(&_dbg_uart_inst);
+}
+
+void _debug_uart_init(void) {
+    //if (_dbg_uart_initialized) return;
+    nrfx_uarte_config_t config = {
+        .pseltxd = DEBUG_UART_TXPIN,
+        .pselrxd = DEBUG_UART_RXPIN,
+        .pselcts = NRF_UARTE_PSEL_DISCONNECTED,
+        .pselrts = NRF_UARTE_PSEL_DISCONNECTED,
+        .p_context = NULL,
+        .baudrate = NRF_UART_BAUDRATE_115200,
+        .interrupt_priority = 7,
+        .hal_cfg = {
+            .hwfc = NRF_UARTE_HWFC_DISABLED,
+            .parity = NRF_UARTE_PARITY_EXCLUDED
+        }
+    };
+    nrfx_uarte_init(&_dbg_uart_inst, &config, NULL);
+    // drive config
+    nrf_gpio_cfg(config.pseltxd,
+         NRF_GPIO_PIN_DIR_OUTPUT,
+         NRF_GPIO_PIN_INPUT_DISCONNECT,
+         NRF_GPIO_PIN_PULLUP, // orig=NOPULL
+         NRF_GPIO_PIN_H0H1,  // orig=S0S1
+         NRF_GPIO_PIN_NOSENSE);
+    _dbg_uart_initialized = 1;
+    return;
+}
+
+void _debug_print_substr(const char* text, uint32_t length) {
+    char* data = (char*)text;
+    int   siz;
+    while(length != 0) {
+        if (length <= DBG_PBUF_LEN) {
+      siz = length;
+    }
+    else {
+      siz = DBG_PBUF_LEN;
+    }
+    memcpy(_dbg_pbuf, data, siz);
+    _dbg_pbuf[siz] = 0;
+    nrfx_uarte_tx(&_dbg_uart_inst, (uint8_t const*)_dbg_pbuf, siz);
+    data += siz;
+    length -= siz;
+    }
+}
+
+void _debug_uart_deinit(void) {
+    nrfx_uarte_uninit(&_dbg_uart_inst);
+}
+
+int dbg_printf(const char *fmt, ...) {
+    va_list ap;
+    va_start(ap, fmt);
+    int ret = vprintf(fmt, ap);
+    va_end(ap);
+    return ret;
+}
+
+void dbg_dump_RTCreg(void) {
+    dbg_printf("\r\nRTC2\r\n");
+    NRF_RTC_Type  *r = rtc_instance.p_reg;
+    dbg_printf("PRESCALER=%08X, ", (int)r->PRESCALER);
+    dbg_printf("COUNTER=%08X  ", (int)r->COUNTER);
+    dbg_printf("INTENSET=%08X ", (int)r->INTENSET);
+    dbg_printf("EVTENSET=%08X\r\n", (int)r->EVTENSET);
+    dbg_printf("EVENTS_COMPARE[0..3]=%X,%X,%X,%X ", (int)r->EVENTS_COMPARE[0], (int)r->EVENTS_COMPARE[1], (int)r->EVENTS_COMPARE[2], (int)r->EVENTS_COMPARE[3]);
+    dbg_printf("CC[0..3]=%08X,%08X,%08X,%08X\r\n", (int)r->CC[0], (int)r->CC[1], (int)r->CC[2], (int)r->CC[3]);
+}
+
+int dbg_check_RTCprescaler(void) {
+    NRF_RTC_Type  *r = rtc_instance.p_reg;
+    if ((int)r->PRESCALER == 0) {
+        dbg_printf("****** PRESCALER == 0\r\n");
+    return -1;
+    }
+    return 0;
+}
+
+void dbg_dump_RAMreg(void) {
+    int i;
+    for(i = 0; i <= 8; ++i) {
+        dbg_printf(" RAM%d:%08X", i, (int)(NRF_POWER->RAM[i].POWER));
+        if (i==4) dbg_printf("\r\n");
+    }
+    dbg_printf("\r\n");
+}
+
+void dbg_dump_GPIOregs(void) {
+    int i, port, col;
+
+    NRF_GPIO_Type *gpio[] = { NRF_P0, NRF_P1 };
+    const char cnf_pull_chr[] = "-D*U";  // pull down, pull up
+    const char cnf_sense_chr[] = "-?HL"; // sense high, sense low
+    for(port=0, col=0; port<=1; ++port) {
+        for(i=0; i<32; ++i) {
+        uint32_t cnf = gpio[port]->PIN_CNF[i];
+        if (cnf != 0x0002) { // changed from default value
+            dbg_printf("[%d_%02d]:%c%c%c%d%c ", port, i,
+               (cnf & 1) ? 'O' : 'I',  // output, input
+               (cnf & 2) ? 'd' : 'c',  // disconnected, connected
+               cnf_pull_chr[(cnf >> 2) & 3],
+               (int)((cnf >> 8) & 7),  // drive config 0-7
+               cnf_sense_chr[(cnf >> 16) & 3]);
+        if (++col >= 6) {
+            dbg_printf("\r\n");
+            col = 0;
+        }
+        }
+    }
+    }
+    if (col > 0) dbg_printf("\r\n");
+
+    dbg_printf("GPIOTE\r\n");
+    NRF_GPIOTE_Type const *reg = NRF_GPIOTE;
+    const char config_mode_chr[] = "-E-T"; // event, task
+    const char config_pol_chr[] = "-HLT"; // low-to-Hi, hi-to-Low, Toggle
+    const char config_outinit_chr[] = "01"; // initial value is 0 or 1
+    for(i=0, col=0; i<8; ++i) {
+        uint32_t conf = reg->CONFIG[i];
+    if (conf != 0) {  // changed from default value
+        dbg_printf("CONFIG[%d]:%d_%02d,%c%c%c ", i,
+               (int)((conf >> 13) & 1), (int)((conf >> 8) & 0x1F),
+               config_mode_chr[conf & 3],
+               config_pol_chr[(conf >> 16) & 3],
+               (conf & 3) == 3 ?
+                   config_outinit_chr[(conf >> 20) & 1] : '-');
+        if (++col >= 4) {
+            dbg_printf("\r\n");
+        col = 0;
+        }
+    }
+    }
+    if (col > 0) dbg_printf("\r\n");
+    for(i=0; i<8; ++i) {
+        dbg_printf("EVENTS_IN[%d]:%X ", i, (int)(reg->EVENTS_IN[i]));
+    if ((i & 3) == 3) dbg_printf("\r\n");
+    }
+    dbg_printf("EVENTS_PORT:%X INTENSET:%08X\r\n",
+           (int)(reg->EVENTS_PORT), (int)(reg->INTENSET));
+}
+
+void dbg_dumpQSPIreg(void) {
+    uint32_t r;
+    dbg_printf("QSPI\r\n");
+    r = NRF_QSPI->IFCONFIG0;
+    dbg_printf("IFCONFIG0 READ=%ld write=%ld ADDR=%ld DPM=%ld PPSIZE=%ld\r\n",
+           r & 7, (r >> 3) & 7, (r >> 6) & 1, (r >> 7) & 1, (r >> 12) & 1);
+    r = NRF_QSPI->IFCONFIG1;
+    dbg_printf("IFCONFIG1 SCKDELAY=%ld SPIMODE=%ld SCKFREQ=%ld\r\n",
+           r & 0xFF, (r >> 25) & 1, (r >> 28) & 0xF);
+    r = NRF_QSPI->STATUS;
+    dbg_printf("STATUS    DPM=%ld READY=%ld SREG=0x%02lX\r\n",
+           (r >> 2) & 1, (r >> 3) & 1, (r >> 24) & 0xFF);
+    r = NRF_QSPI->DPMDUR;
+    dbg_printf("DPMDUR    ENTER=%ld EXIT=%ld\r\n", r & 0xFFFF, (r >> 16) & 0xFFFF);
+}
+
+void dbg_dump_reset_reason(void) {
+    int reset_reason = (int)common_hal_mcu_processor_get_reset_reason();
+    const char* rr_str[] = {
+      "POWER_ON", "BROWNOUT", "SOFTWARE", "DEEPSLEEPALARM",
+      "RESET_PIN", "WATCHDOG", "UNKNOWN"
+    };
+    dbg_printf("reset_reason=%s\r\n", rr_str[reset_reason]);
+}
+
+#else /*!NRF_DEBUG_PRINT*/
+int dbg_printf(const char *fmt, ...) {
+    return 0;
+}
+#endif /*!NRF_DEBUG_PRINT*/

ports/nrf/supervisor/port.c

@@ -4,6 +4,7 @@
  * The MIT License (MIT)
  *
  * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
+ * Copyright (c) 2021 Junji Sakai
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -51,6 +52,7 @@
 #include "common-hal/rtc/RTC.h"
 #include "common-hal/neopixel_write/__init__.h"
 #include "common-hal/watchdog/WatchDogTimer.h"
+#include "common-hal/alarm/__init__.h"
 
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/rtc/__init__.h"
@@ -73,9 +75,14 @@ static void power_warning_handler(void) {
     reset_into_safe_mode(BROWNOUT);
 }
 
+#ifdef NRF_DEBUG_PRINT
+extern void _debug_uart_init(void);
+#endif
+
+uint32_t reset_reason_saved = 0;
 const nrfx_rtc_t rtc_instance = NRFX_RTC_INSTANCE(2);
 
-const nrfx_rtc_config_t rtc_config = {
+nrfx_rtc_config_t rtc_config = {
     .prescaler = RTC_FREQ_TO_PRESCALER(0x8000),
     .reliable = 0,
     .tick_latency = 0,
@@ -100,6 +107,12 @@ void rtc_handler(nrfx_rtc_int_type_t int_type) {
         supervisor_tick();
     } else if (int_type == NRFX_RTC_INT_COMPARE0) {
         nrfx_rtc_cc_set(&rtc_instance, 0, 0, false);
+    } else if (int_type == NRFX_RTC_INT_COMPARE1) {
+        // used in light sleep
+        #if CIRCUITPY_ALARM
+        sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_TIMER;
+        #endif
+        nrfx_rtc_cc_set(&rtc_instance, 1, 0, false);
     }
 }
 
@@ -124,6 +137,22 @@ void tick_init(void) {
     }
 }
 
+void tick_uninit(void) {
+    nrfx_rtc_counter_clear(&rtc_instance);
+    nrfx_rtc_disable(&rtc_instance);
+    nrfx_rtc_uninit(&rtc_instance);
+}
+
+void tick_set_prescaler(uint32_t prescaler_val) {
+    tick_uninit();
+    // update of prescaler value sometimes fails if we skip this delay..
+    NRFX_DELAY_US(1000);
+    uint16_t prescaler_saved = rtc_config.prescaler;
+    rtc_config.prescaler = prescaler_val;
+    tick_init();
+    rtc_config.prescaler = prescaler_saved;
+}
+
 safe_mode_t port_init(void) {
     nrf_peripherals_clocks_init();
 
@@ -153,11 +182,21 @@ safe_mode_t port_init(void) {
     analogin_init();
     #endif
 
+    reset_reason_saved = NRF_POWER->RESETREAS;
+    // clear all RESET reason bits
+    NRF_POWER->RESETREAS = reset_reason_saved;
+    // clear wakeup event/pin when reset by reset-pin
+    if (reset_reason_saved & NRF_POWER_RESETREAS_RESETPIN_MASK) {
+        #if CIRCUITPY_ALARM
+        sleepmem_wakeup_event = SLEEPMEM_WAKEUP_BY_NONE;
+        #endif
+    }
+
     // If the board was reset by the WatchDogTimer, we may
     // need to boot into safe mode. Reset the RESETREAS bit
     // for the WatchDogTimer so we don't encounter this the
     // next time we reboot.
-    if (NRF_POWER->RESETREAS & POWER_RESETREAS_DOG_Msk) {
+    if (reset_reason_saved & POWER_RESETREAS_DOG_Msk) {
         NRF_POWER->RESETREAS = POWER_RESETREAS_DOG_Msk;
         uint32_t usb_reg = NRF_POWER->USBREGSTATUS;
 
@@ -219,6 +258,10 @@ void reset_port(void) {
     #endif
 
     reset_all_pins();
+
+#ifdef NRF_DEBUG_PRINT
+    _debug_uart_init();
+#endif
 }
 
 void reset_to_bootloader(void) {
@@ -295,7 +338,7 @@ void port_disable_tick(void) {
     nrfx_rtc_tick_disable(&rtc_instance);
 }
 
-void port_interrupt_after_ticks(uint32_t ticks) {
+void port_interrupt_after_ticks_ch(uint32_t channel, uint32_t ticks) {
     uint32_t current_ticks = nrfx_rtc_counter_get(&rtc_instance);
     uint32_t diff = 3;
     if (ticks > diff) {
@@ -304,7 +347,15 @@ void port_interrupt_after_ticks(uint32_t ticks) {
     if (diff > 0xffffff) {
         diff = 0xffffff;
     }
-    nrfx_rtc_cc_set(&rtc_instance, 0, current_ticks + diff, true);
+    nrfx_rtc_cc_set(&rtc_instance, channel, current_ticks + diff, true);
+}
+
+void port_disable_interrupt_after_ticks_ch(uint32_t channel) {
+    nrfx_rtc_cc_disable(&rtc_instance, channel);
+}
+
+void port_interrupt_after_ticks(uint32_t ticks) {
+    port_interrupt_after_ticks_ch(0, ticks);
 }
 
 void port_idle_until_interrupt(void) {
@@ -355,3 +406,9 @@ void HardFault_Handler(void) {
         asm ("nop;");
     }
 }
+
+#if CIRCUITPY_ALARM
+// in case boards/xxx/board.c does not provide board_deinit()
+MP_WEAK void board_deinit(void) {
+}
+#endif

ports/nrf/supervisor/qspi_flash.c

@@ -37,6 +37,31 @@
 
 #include "supervisor/shared/external_flash/common_commands.h"
 #include "supervisor/shared/external_flash/qspi_flash.h"
+#ifdef NRF_DEBUG_PRINT
+#include "supervisor/serial.h" // dbg_printf()
+#endif
+
+#ifdef QSPI_FLASH_POWERDOWN
+// Parameters for external QSPI Flash power-down
+// for W25Q128FV,
+//   tDP (nCS high to Power-down mode) = 3us
+//   tRES (nCS high to Standby mode)   = 3us
+//   sck_delay = max(tDP, tRES) / 62.5ns = 48  -> 50 (w/ margin)
+#define DUR_DPM_ENTER  1  // tDP  in (256*62.5ns) units
+#define DUR_DPM_EXIT   1  // tRES in (256*62.5ns) units
+#define SCK_DELAY      50 // max(tDP, tRES) in (62.5ns) units
+//   wait necessary just after DPM enter/exit (cut and try)
+#define WAIT_AFTER_DPM_ENTER 10 // usec
+#define WAIT_AFTER_DPM_EXIT  50 // usec
+
+static int sck_delay_saved = 0;
+#endif
+
+#ifdef NRF_DEBUG_PRINT
+extern void dbg_dumpQSPIreg(void);
+#else
+#define dbg_dumpQSPIreg(...)
+#endif
 
 // When USB is disconnected, disable QSPI in sleep mode to save energy
 void qspi_disable(void) {
@@ -188,7 +213,11 @@ void spi_flash_init(void) {
             .readoc = NRF_QSPI_READOC_FASTREAD,
             .writeoc = NRF_QSPI_WRITEOC_PP,
             .addrmode = NRF_QSPI_ADDRMODE_24BIT,
+#ifdef QSPI_FLASH_POWERDOWN
+            .dpmconfig = true
+#else
             .dpmconfig = false
+#endif
         },
         .phy_if = {
             .sck_freq = NRF_QSPI_FREQ_32MDIV16, // Start at a slow 2MHz and speed up once we know what we're talking to.
@@ -213,6 +242,13 @@ void spi_flash_init(void) {
 
     // No callback for blocking API
     nrfx_qspi_init(&qspi_cfg, NULL, NULL);
+
+#ifdef QSPI_FLASH_POWERDOWN
+    // If pin-reset while flash is in power-down mode,
+    // the flash cannot accept any commands. Send CMD_WAKE to release it.
+    spi_flash_write_command(CMD_WAKE, NULL, 0);
+    NRFX_DELAY_US(WAIT_AFTER_DPM_EXIT);
+#endif
 }
 
 void spi_flash_init_device(const external_flash_device *device) {
@@ -236,3 +272,61 @@ void spi_flash_init_device(const external_flash_device *device) {
     NRF_QSPI->IFCONFIG1 &= ~QSPI_IFCONFIG1_SCKFREQ_Msk;
     NRF_QSPI->IFCONFIG1 |= sckfreq << QSPI_IFCONFIG1_SCKFREQ_Pos;
 }
+
+void qspi_flash_enter_sleep(void) {
+#ifdef QSPI_FLASH_POWERDOWN
+    uint32_t r;
+    NRF_QSPI->DPMDUR =
+        ((DUR_DPM_ENTER & 0xFFFF) << 16) | (DUR_DPM_EXIT & 0xFFFF);
+    // set sck_delay tempolarily
+    r = NRF_QSPI->IFCONFIG1;
+    sck_delay_saved = (r & QSPI_IFCONFIG1_SCKDELAY_Msk)
+                >> QSPI_IFCONFIG1_SCKDELAY_Pos;
+    NRF_QSPI->IFCONFIG1
+        = (NRF_QSPI->IFCONFIG1 & ~QSPI_IFCONFIG1_SCKDELAY_Msk)
+        | (SCK_DELAY << QSPI_IFCONFIG1_SCKDELAY_Pos);
+
+    // enabling IFCONFIG0.DPMENABLE here won't work.
+    //  -> do it in spi_flash_init()
+    //NRF_QSPI->IFCONFIG0 |= QSPI_IFCONFIG0_DPMENABLE_Msk;
+    //dbg_dumpQSPIreg();
+
+    // enter deep power-down mode (DPM)
+    NRF_QSPI->IFCONFIG1 |= QSPI_IFCONFIG1_DPMEN_Msk;
+    NRFX_DELAY_US(WAIT_AFTER_DPM_ENTER);
+    if (!(NRF_QSPI->STATUS & QSPI_STATUS_DPM_Msk)) {
+#ifdef NRF_DEBUG_PRINT
+        dbg_printf("qspi flash: DPM failed\r\n");
+#endif
+    }
+#endif
+
+    qspi_disable();
+    //dbg_dumpQSPIreg();
+}
+
+void qspi_flash_exit_sleep(void) {
+    qspi_enable();
+
+#ifdef QSPI_FLASH_POWERDOWN
+    if (NRF_QSPI->STATUS & QSPI_STATUS_DPM_Msk) {
+        // exit deep power-down mode
+        NRF_QSPI->IFCONFIG1 &= ~QSPI_IFCONFIG1_DPMEN_Msk;
+    NRFX_DELAY_US(WAIT_AFTER_DPM_EXIT);
+
+    if (NRF_QSPI->STATUS & QSPI_STATUS_DPM_Msk) {
+#ifdef NRF_DEBUG_PRINT
+        dbg_printf("qspi flash: exiting DPM failed\r\n");
+#endif
+    }
+    // restore sck_delay
+    if (sck_delay_saved == 0) {
+        sck_delay_saved = 10; // default
+    }
+    NRF_QSPI->IFCONFIG1
+        = (NRF_QSPI->IFCONFIG1 & ~QSPI_IFCONFIG1_SCKDELAY_Msk)
+        | (sck_delay_saved << QSPI_IFCONFIG1_SCKDELAY_Pos);
+    }
+    //dbg_dumpQSPIreg();
+#endif
+}

ports/nrf/supervisor/qspi_flash.h

@@ -0,0 +1,2 @@
+extern void qspi_flash_enter_sleep(void);
+extern void qspi_flash_exit_sleep(void);

shared-bindings/alarm/__init__.c

@@ -244,6 +244,7 @@ const mp_obj_module_t alarm_module = {
 };
 
 extern void port_idle_until_interrupt(void);
+
 MP_WEAK void common_hal_alarm_pretending_deep_sleep(void) {
     port_idle_until_interrupt();
 }

shared-bindings/displayio/Bitmap.c

@@ -49,7 +49,7 @@
 //| but the `displayio.Bitmap.dirty` method must be used to inform
 //| displayio when a bitmap was modified through the buffer interface.
 //|
-//| `bitmaptools.arrayblit` can also be useful to omve data efficiently
+//| `bitmaptools.arrayblit` can also be useful to move data efficiently
 //| into a Bitmap.
 //| """
 //|

supervisor/serial.h

@@ -29,6 +29,7 @@
 
 #include <stdbool.h>
 #include <stdint.h>
+#include <stdio.h>
 
 #include "py/mpconfig.h"
 
@@ -47,4 +48,7 @@ char serial_read(void);
 bool serial_bytes_available(void);
 bool serial_connected(void);
 
+// XXX  used in nrf52-sleep debug
+int dbg_printf(const char *fmt, ...)__attribute__((format (printf, 1, 2)));
+
 #endif  // MICROPY_INCLUDED_SUPERVISOR_SERIAL_H

supervisor/shared/serial.c

@@ -37,6 +37,12 @@
 
 #include "tusb.h"
 
+#ifdef NRF_DEBUG_PRINT
+// XXX  these functions are in nrf/supervisor/debug_uart.c
+extern void _debug_uart_init(void);
+extern void _debug_print_substr(const char *text, uint32_t length);
+#endif
+
 /*
  * Note: DEBUG_UART currently only works on STM32,
  * enabling on another platform will cause a crash.
@@ -64,10 +70,17 @@ void serial_early_init(void) {
         buf_array, true);
     common_hal_busio_uart_never_reset(&debug_uart);
     #endif
+
+    #ifdef NRF_DEBUG_PRINT
+    _debug_uart_init();
+    #endif
 }
 
 void serial_init(void) {
     usb_init();
+    #ifdef NRF_DEBUG_PRINT
+    _debug_uart_init();
+    #endif
 }
 
 bool serial_connected(void) {
@@ -146,8 +159,14 @@ void serial_write_substring(const char *text, uint32_t length) {
 
     #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX)
     int uart_errcode;
+
     common_hal_busio_uart_write(&debug_uart, (const uint8_t *)text, length, &uart_errcode);
     #endif
+
+    #ifdef NRF_DEBUG_PRINT
+    _debug_print_substr(text, length);
+    #endif
+
 }
 
 void serial_write(const char *text) {