Merge pull request #31 from adafruit/main

Update from adafruit/main

.github/workflows/build.yml

@@ -28,7 +28,7 @@ jobs:
     - name: CircuitPython version
       run: |
         git describe --dirty --tags
-        echo "::set-env name=CP_VERSION::$(git describe --dirty --tags)"
+        echo >>$GITHUB_ENV CP_VERSION=$(git describe --dirty --tags)
     - name: Set up Python 3.8
       uses: actions/setup-python@v1
       with:
@@ -132,7 +132,7 @@ jobs:
     - name: Install dependencies
       run: |
         brew install gettext awscli
-        echo "::set-env name=PATH::/usr/local/opt/gettext/bin:$PATH"
+        echo >>$GITHUB_PATH /usr/local/opt/gettext/bin
     - name: Versions
       run: |
         gcc --version
@@ -146,7 +146,7 @@ jobs:
     - name: CircuitPython version
       run: |
         git describe --dirty --tags
-        echo "::set-env name=CP_VERSION::$(git describe --dirty --tags)"
+        echo >>$GITHUB_ENV CP_VERSION=$(git describe --dirty --tags)
     - name: Build mpy-cross
       run: make -C mpy-cross -j2
     - uses: actions/upload-artifact@v2
@@ -180,6 +180,7 @@ jobs:
         - "arduino_zero"
         - "bast_pro_mini_m0"
         - "bdmicro_vina_d21"
+        - "bdmicro_vina_d51"
         - "bless_dev_board_multi_sensor"
         - "blm_badge"
         - "capablerobot_usbhub"
@@ -243,6 +244,7 @@ jobs:
         - "metro_m0_express"
         - "metro_m4_airlift_lite"
         - "metro_m4_express"
+        - "metro_m7_1011"
         - "metro_nrf52840_express"
         - "mini_sam_m4"
         - "monster_m4sk"

.github/workflows/pre-commit.yml

@@ -16,7 +16,7 @@ jobs:
     - uses: actions/checkout@v1
     - uses: actions/setup-python@v1
     - name: set PY
-      run: echo "::set-env name=PY::$(python -c 'import hashlib, sys;print(hashlib.sha256(sys.version.encode()+sys.executable.encode()).hexdigest())')"
+      run: echo >>$GITHUB_ENV PY="$(python -c 'import hashlib, sys;print(hashlib.sha256(sys.version.encode()+sys.executable.encode()).hexdigest())')"
     - uses: actions/cache@v1
       with:
         path: ~/.cache/pre-commit

.gitmodules

@@ -144,12 +144,12 @@
 [submodule "frozen/Adafruit_CircuitPython_BLE_Apple_Notification_Center"]
 	path = frozen/Adafruit_CircuitPython_BLE_Apple_Notification_Center
 	url = https://github.com/adafruit/Adafruit_CircuitPython_BLE_Apple_Notification_Center
-[submodule "ports/esp32s2/esp-idf"]
-	path = ports/esp32s2/esp-idf
-	url = https://github.com/tannewt/esp-idf.git
 [submodule "frozen/Adafruit_CircuitPython_RFM9x"]
 	path = frozen/Adafruit_CircuitPython_RFM9x
 	url = https://github.com/adafruit/Adafruit_CircuitPython_RFM9x.git
 [submodule "frozen/Adafruit_CircuitPython_RFM69"]
 	path = frozen/Adafruit_CircuitPython_RFM69
 	url = https://github.com/adafruit/Adafruit_CircuitPython_RFM69.git
+[submodule "ports/esp32s2/esp-idf"]
+	path = ports/esp32s2/esp-idf
+	url = https://github.com/espressif/esp-idf.git

devices/ble_hci/common-hal/_bleio/__init__.c

@@ -98,7 +98,7 @@ bleio_adapter_obj_t *common_hal_bleio_allocate_adapter_or_raise(void) {
 
 void common_hal_bleio_check_connected(uint16_t conn_handle) {
     if (conn_handle == BLE_CONN_HANDLE_INVALID) {
-        mp_raise_bleio_ConnectionError(translate("Not connected"));
+        mp_raise_ConnectionError(translate("Not connected"));
     }
 }
 

extmod/vfs_fat_diskio.c

@@ -123,7 +123,7 @@ DRESULT disk_write (
 
 DRESULT disk_ioctl (
     bdev_t pdrv,      /* Physical drive nmuber (0..) */
-    BYTE cmd,        /* Control code */
+    BYTE cmd,         /* Control code */
     void *buff        /* Buffer to send/receive control data */
 )
 {
@@ -133,7 +133,7 @@ DRESULT disk_ioctl (
     }
 
     // First part: call the relevant method of the underlying block device
-    mp_obj_t ret = mp_const_none;
+    mp_int_t out_value = 0;
     if (vfs->flags & FSUSER_HAVE_IOCTL) {
         // new protocol with ioctl
         static const uint8_t op_map[8] = {
@@ -144,9 +144,19 @@ DRESULT disk_ioctl (
         };
         uint8_t bp_op = op_map[cmd & 7];
         if (bp_op != 0) {
-            vfs->u.ioctl[2] = MP_OBJ_NEW_SMALL_INT(bp_op);
+            if (vfs->flags & FSUSER_NATIVE) {
-            vfs->u.ioctl[3] = MP_OBJ_NEW_SMALL_INT(0); // unused
+                bool (*f)(size_t, mp_int_t*) = (void*)(uintptr_t)vfs->u.ioctl[2];
-            ret = mp_call_method_n_kw(2, 0, vfs->u.ioctl);
+                if (!f(bp_op, (mp_int_t*) &out_value)) {
+                    return RES_ERROR;
+                }
+            } else {
+                vfs->u.ioctl[2] = MP_OBJ_NEW_SMALL_INT(bp_op);
+                vfs->u.ioctl[3] = MP_OBJ_NEW_SMALL_INT(0); // unused
+                mp_obj_t ret = mp_call_method_n_kw(2, 0, vfs->u.ioctl);
+                if (ret != mp_const_none) {
+                    out_value = mp_obj_get_int(ret);
+                }
+            }
         }
     } else {
         // old protocol with sync and count
@@ -157,10 +167,13 @@ DRESULT disk_ioctl (
                 }
                 break;
 
-            case GET_SECTOR_COUNT:
+            case GET_SECTOR_COUNT: {
-                ret = mp_call_method_n_kw(0, 0, vfs->u.old.count);
+                mp_obj_t ret = mp_call_method_n_kw(0, 0, vfs->u.old.count);
+                if (ret != mp_const_none) {
+                    out_value = mp_obj_get_int(ret);
+                }
                 break;
-
+            }
             case GET_SECTOR_SIZE:
                 // old protocol has fixed sector size of 512 bytes
                 break;
@@ -177,16 +190,16 @@ DRESULT disk_ioctl (
             return RES_OK;
 
         case GET_SECTOR_COUNT: {
-            *((DWORD*)buff) = mp_obj_get_int(ret);
+            *((DWORD*)buff) = out_value;
             return RES_OK;
         }
 
         case GET_SECTOR_SIZE: {
-            if (ret == mp_const_none) {
+            if (out_value == 0) {
                 // Default sector size
                 *((WORD*)buff) = 512;
             } else {
-                *((WORD*)buff) = mp_obj_get_int(ret);
+                *((WORD*)buff) = out_value;
             }
             #if _MAX_SS != _MIN_SS
             // need to store ssize because we use it in disk_read/disk_write
@@ -202,7 +215,7 @@ DRESULT disk_ioctl (
         case IOCTL_INIT:
         case IOCTL_STATUS: {
             DSTATUS stat;
-            if (ret != mp_const_none && MP_OBJ_SMALL_INT_VALUE(ret) != 0) {
+            if (out_value != 0) {
                 // error initialising
                 stat = STA_NOINIT;
             } else if (vfs->writeblocks[0] == MP_OBJ_NULL) {

lib/protomatter

@@ -1 +1 @@
-Subproject commit 2a1ba8fa4753b2bcb158c9b17351cf18eade0d2b
+Subproject commit de6b7704c530d886ad8dfa0fa1864764d86117ee

locale/ID.po

@@ -5,8 +5,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
-"PO-Revision-Date: 2020-07-06 18:10+0000\n"
+"PO-Revision-Date: 2020-10-10 23:51+0000\n"
 "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: ID\n"
@@ -14,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Weblate 4.2-dev\n"
+"X-Generator: Weblate 4.3-dev\n"
 
 #: main.c
 msgid ""
@@ -250,6 +250,10 @@ msgstr "'label' membutuhkan 1 argumen"
 msgid "'return' outside function"
 msgstr "'return' diluar fungsi"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' diluar fungsi"
@@ -275,6 +279,10 @@ msgstr "pow() 3-arg tidak didukung"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Sebuah channel hardware interrupt sedang digunakan"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -289,6 +297,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Semua perangkat I2C sedang digunakan"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -910,6 +919,7 @@ msgid "File exists"
 msgstr "File sudah ada"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -947,7 +957,8 @@ msgid "Group full"
 msgstr "Grup penuh"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "Perangkat keras sibuk, coba pin alternatif"
 
@@ -1019,7 +1030,8 @@ msgid "Invalid %q pin"
 msgstr "%q pada tidak valid"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1218,34 +1230,35 @@ msgstr "Kesalahan fatal MicroPython."
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
-msgstr ""
+msgstr "Penundaan mulai mikrofon harus dalam kisaran 0,0 hingga 1,0"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
 msgid "Missing MISO or MOSI Pin"
-msgstr ""
+msgstr "Tidak menemukan Pin MISO atau MOSI"
 
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
-msgstr ""
+msgstr "Harus berupa subclass %q."
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c
 msgid "Must provide MISO or MOSI pin"
-msgstr ""
+msgstr "Harus menyediakan pin MISO atau MOSI"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
-msgstr ""
+msgstr "Harus menggunakan kelipatan 6 pin rgb, bukan %d"
 
 #: py/parse.c
 msgid "Name too long"
-msgstr ""
+msgstr "Nama terlalu panjang"
 
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
-msgstr ""
+msgstr "Tidak ada CCCD untuk Karakteristik ini"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip"
@@ -1258,12 +1271,12 @@ msgstr "tidak ada channel DMA ditemukan"
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
-msgstr ""
+msgstr "Tidak ada Pin MISO"
 
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
-msgstr ""
+msgstr "Tidak ada Pin MOSI"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
@@ -1281,11 +1294,11 @@ msgstr "Tidak ada pin TX"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
-msgstr ""
+msgstr "Tidak ada clocks yang tersedia"
 
 #: shared-bindings/_bleio/PacketBuffer.c
 msgid "No connection: length cannot be determined"
-msgstr ""
+msgstr "Tidak ada koneksi: panjang tidak dapat ditentukan"
 
 #: shared-bindings/board/__init__.c
 msgid "No default %q bus"
@@ -1297,11 +1310,11 @@ msgstr "Tidak ada GCLK yang kosong"
 
 #: shared-bindings/os/__init__.c
 msgid "No hardware random available"
-msgstr ""
+msgstr "Tidak ada perangkat keras acak yang tersedia"
 
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 msgid "No hardware support on clk pin"
-msgstr ""
+msgstr "Tidak ada dukungan perangkat keras pada pin clk"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -1310,11 +1323,11 @@ msgstr "Tidak ada dukungan hardware untuk pin"
 
 #: shared-bindings/aesio/aes.c
 msgid "No key was specified"
-msgstr ""
+msgstr "Tidak ada kunci yang ditentukan"
 
 #: shared-bindings/time/__init__.c
 msgid "No long integer support"
-msgstr ""
+msgstr "Tidak ada dukungan bilangan bulat yang panjang"
 
 #: ports/esp32s2/common-hal/pwmio/PWMOut.c
 msgid "No more channels available"
@@ -1326,7 +1339,7 @@ msgstr ""
 
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
-msgstr ""
+msgstr "Tidak ada lagi penghitung waktu yang tersedia pada pin ini."
 
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
@@ -1334,23 +1347,23 @@ msgstr ""
 
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
-msgstr ""
+msgstr "Tidak ada pull-down pada pin; 1Mohm direkomendasikan"
 
 #: py/moduerrno.c
 msgid "No space left on device"
-msgstr ""
+msgstr "Tidak ada ruang yang tersisa di perangkat"
 
 #: py/moduerrno.c
 msgid "No such file/directory"
-msgstr ""
+msgstr "Tidak ada file/direktori"
 
 #: shared-module/rgbmatrix/RGBMatrix.c
 msgid "No timer available"
-msgstr ""
+msgstr "Penghitung waktu tidak tersedia"
 
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
-msgstr ""
+msgstr "Pernyataan kegagalan Perangkat Lunak Nordic."
 
 #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
 msgid "Not a valid IP string"
@@ -1365,7 +1378,7 @@ msgstr "Tidak dapat menyambungkan ke AP"
 #: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
 #: shared-bindings/audiopwmio/PWMAudioOut.c
 msgid "Not playing"
-msgstr ""
+msgstr "Tidak berfungsi"
 
 #: main.c
 msgid "Not running saved code.\n"
@@ -1379,6 +1392,7 @@ msgstr ""
 msgid ""
 "Object has been deinitialized and can no longer be used. Create a new object."
 msgstr ""
+"Objek telah dideinisialisasi dan tidak dapat lagi digunakan. Buat objek baru."
 
 #: ports/nrf/common-hal/busio/UART.c
 msgid "Odd parity is not supported"
@@ -1401,6 +1415,8 @@ msgstr ""
 msgid ""
 "Only Windows format, uncompressed BMP supported: given header size is %d"
 msgstr ""
+"Hanya format Windows, mendukung BMP tidak dikompresi: ukuran header yang "
+"diberikan adalah %d"
 
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
@@ -1408,6 +1424,8 @@ msgid ""
 "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
 "%d bpp given"
 msgstr ""
+"Hanya monokrom, 4bpp atau 8bpp yang diindeks, dan 16bpp atau lebih yang "
+"didukung: %d bpp diberikan"
 
 #: shared-bindings/ipaddress/__init__.c
 msgid "Only raw int supported for ip"
@@ -1419,30 +1437,33 @@ msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
-msgstr ""
+msgstr "Sampel berlebihan harus kelipatan 8."
 
 #: shared-bindings/pwmio/PWMOut.c
 msgid ""
 "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)"
-msgstr ""
+msgstr "PWM duty_cycle harus antara 0 dan 65535 inklusif (resolusi 16 bit)"
 
 #: shared-bindings/pwmio/PWMOut.c
 msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
+"Frekuensi PWM tidak dapat ditulis ketika variabel_frequency Salah pada "
+"konstruksi."
 
 #: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
-msgstr ""
+msgstr "ParallelBus belum didukung"
 
 #: py/moduerrno.c
 msgid "Permission denied"
-msgstr ""
+msgstr "Izin ditolak"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -1455,11 +1476,11 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
-msgstr ""
+msgstr "Pin harus mendukung interupsi perangkat keras"
 
 #: ports/stm/common-hal/pulseio/PulseIn.c
 msgid "Pin number already reserved by EXTI"
-msgstr ""
+msgstr "Nomor pin sudah dipesan oleh EXTI"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
@@ -1468,6 +1489,9 @@ msgid ""
 "bytes.  If this cannot be avoided, pass allow_inefficient=True to the "
 "constructor"
 msgstr ""
+"Pinout menggunakan %d byte per elemen, yang mengonsumsi lebih dari %d byte "
+"ideal. Jika ini tidak dapat dihindari, berikan allow_inefficient=True ke "
+"konstruktor"
 
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
@@ -1494,7 +1518,7 @@ msgstr ""
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Prefix buffer must be on the heap"
-msgstr ""
+msgstr "Buffer awalan harus ada di heap"
 
 #: main.c
 msgid "Press any key to enter the REPL. Use CTRL-D to reload."
@@ -1504,43 +1528,43 @@ msgstr ""
 
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
-msgstr ""
+msgstr "Pull tidak digunakan saat arah output."
 
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
-msgstr ""
+msgstr "Kesalahan DeInit RNG"
 
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG Init Error"
-msgstr ""
+msgstr "Kesalahan Init RNG"
 
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
-msgstr ""
+msgstr "Pembalikan RS485 ditentukan saat tidak dalam mode RS485"
 
 #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
 #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
-msgstr ""
+msgstr "Kalibrasi RTC tidak didukung pada board ini"
 
 #: shared-bindings/time/__init__.c
 msgid "RTC is not supported on this board"
-msgstr ""
+msgstr "RTC tidak didukung di board ini"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "RTS/CTS/RS485 Not yet supported on this device"
-msgstr ""
+msgstr "RTS/CTS/RS485 Belum didukung pada perangkat ini"
 
 #: ports/stm/common-hal/os/__init__.c
 msgid "Random number generation error"
-msgstr ""
+msgstr "Kesalahan pembuatan nomor acak"
 
 #: shared-bindings/memorymonitor/AllocationSize.c
 #: shared-bindings/pulseio/PulseIn.c
 msgid "Read-only"
-msgstr ""
+msgstr "Baca-saja"
 
 #: extmod/vfs_fat.c py/moduerrno.c
 msgid "Read-only filesystem"
@@ -1553,7 +1577,7 @@ msgstr "sistem file (filesystem) bersifat Read-only"
 
 #: shared-bindings/displayio/EPaperDisplay.c
 msgid "Refresh too soon"
-msgstr ""
+msgstr "Segarkan terlalu cepat"
 
 #: shared-bindings/canio/RemoteTransmissionRequest.c
 msgid "RemoteTransmissionRequests limited to 8 bytes"
@@ -1561,7 +1585,7 @@ msgstr ""
 
 #: shared-bindings/aesio/aes.c
 msgid "Requested AES mode is unsupported"
-msgstr ""
+msgstr "Mode AES yang diminta tidak didukung"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Right channel unsupported"
@@ -1569,7 +1593,7 @@ msgstr "Channel Kanan tidak didukung"
 
 #: shared-bindings/_pew/PewPew.c
 msgid "Row entry must be digitalio.DigitalInOut"
-msgstr ""
+msgstr "Entri baris harus digitalio.DigitalInOut"
 
 #: main.c
 msgid "Running in safe mode! "
@@ -1596,15 +1620,15 @@ msgstr ""
 
 #: ports/stm/common-hal/busio/SPI.c
 msgid "SPI Init Error"
-msgstr ""
+msgstr "Kesalahan Init SPI"
 
 #: ports/stm/common-hal/busio/SPI.c
 msgid "SPI Re-initialization error"
-msgstr ""
+msgstr "Kesalahan Inisialisasi ulang SPI"
 
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
-msgstr ""
+msgstr "Tingkat sampel harus positif"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #, c-format
@@ -1613,15 +1637,15 @@ msgstr "Nilai sampel terlalu tinggi. Nilai harus kurang dari %d"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Scan already in progess. Stop with stop_scan."
-msgstr ""
+msgstr "Pindai sudah dalam proses. Hentikan dengan stop_scan."
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Selected CTS pin not valid"
-msgstr ""
+msgstr "Pin CTS yang dipilih tidak valid"
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Selected RTS pin not valid"
-msgstr ""
+msgstr "Pin RTS yang dipilih tidak valid"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
@@ -1638,14 +1662,14 @@ msgstr ""
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
-msgstr ""
+msgstr "Potongan dan nilai panjangnya berbeda."
 
 #: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
 #: shared-bindings/displayio/TileGrid.c
 #: shared-bindings/memorymonitor/AllocationSize.c
 #: shared-bindings/pulseio/PulseIn.c
 msgid "Slices not supported"
-msgstr ""
+msgstr "Potongan tidak didukung"
 
 #: ports/esp32s2/common-hal/socketpool/SocketPool.c
 msgid "SocketPool can only be used with wifi.radio"
@@ -1653,7 +1677,7 @@ msgstr ""
 
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
-msgstr ""
+msgstr "Buffer sumber dan tujuan harus memiliki panjang yang sama"
 
 #: extmod/modure.c
 msgid "Splitting with sub-captures"
@@ -1661,15 +1685,15 @@ msgstr "Memisahkan dengan menggunakan sub-captures"
 
 #: shared-bindings/supervisor/__init__.c
 msgid "Stack size must be at least 256"
-msgstr ""
+msgstr "Ukuran stack minimal harus 256"
 
 #: shared-bindings/multiterminal/__init__.c
 msgid "Stream missing readinto() or write() method."
-msgstr ""
+msgstr "Aliran tidak menemukan metode readinto() atau write()."
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
-msgstr ""
+msgstr "Berikan setidaknya satu pin UART"
 
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
@@ -1677,19 +1701,23 @@ msgstr ""
 
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
-msgstr ""
+msgstr "Waktu baca suhu habis"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
 "Please increase the stack size if you know how, or if not:"
 msgstr ""
+"heap dari CircuitPython rusak karena stack terlalu kecil.\n"
+"Harap tambah ukuran stack jika Anda tahu caranya, atau jika tidak:"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The `microcontroller` module was used to boot into safe mode. Press reset to "
 "exit safe mode.\n"
 msgstr ""
+"Modul `microcontroller` digunakan untukboot ke mode aman. Tekan reset untuk "
+"keluar dari mode aman.\n"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
@@ -3178,6 +3206,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3185,6 +3214,7 @@ msgstr ""
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3453,6 +3483,10 @@ msgstr ""
 msgid "type object '%q' has no attribute '%q'"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr ""

locale/circuitpython.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -246,6 +246,10 @@ msgstr ""
 msgid "'return' outside function"
 msgstr ""
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr ""
@@ -271,6 +275,10 @@ msgstr ""
 msgid "A hardware interrupt channel is already in use"
 msgstr ""
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -285,6 +293,7 @@ msgid "All I2C peripherals are in use"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -892,6 +901,7 @@ msgid "File exists"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -928,7 +938,8 @@ msgid "Group full"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
@@ -998,7 +1009,8 @@ msgid "Invalid %q pin"
 msgstr ""
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1225,6 +1237,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
@@ -1421,6 +1434,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3144,6 +3158,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3151,6 +3166,7 @@ msgstr ""
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3418,6 +3434,10 @@ msgstr ""
 msgid "type object '%q' has no attribute '%q'"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr ""

locale/cs.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: 2020-05-24 03:22+0000\n"
 "Last-Translator: dronecz <mzuzelka@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -250,6 +250,10 @@ msgstr ""
 msgid "'return' outside function"
 msgstr ""
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr ""
@@ -275,6 +279,10 @@ msgstr ""
 msgid "A hardware interrupt channel is already in use"
 msgstr ""
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -289,6 +297,7 @@ msgid "All I2C peripherals are in use"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -896,6 +905,7 @@ msgid "File exists"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -932,7 +942,8 @@ msgid "Group full"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
@@ -1002,7 +1013,8 @@ msgid "Invalid %q pin"
 msgstr ""
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1229,6 +1241,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
@@ -1425,6 +1438,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3148,6 +3162,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3155,6 +3170,7 @@ msgstr ""
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3422,6 +3438,10 @@ msgstr ""
 msgid "type object '%q' has no attribute '%q'"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr ""

locale/de_DE.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: 2020-06-16 18:24+0000\n"
 "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n"
 "Language: de_DE\n"
@@ -249,6 +249,10 @@ msgstr "'label' erfordert genau ein Argument"
 msgid "'return' outside function"
 msgstr "'return' außerhalb einer Funktion"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' außerhalb einer Funktion"
@@ -274,6 +278,10 @@ msgstr "3-arg pow() wird nicht unterstützt"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Ein Hardware Interrupt Kanal wird schon benutzt"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -288,6 +296,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Alle I2C-Peripheriegeräte sind in Benutzung"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -907,6 +916,7 @@ msgid "File exists"
 msgstr "Datei existiert"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -947,7 +957,8 @@ msgid "Group full"
 msgstr "Gruppe voll"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "Hardware beschäftigt, versuchen Sie alternative Pins"
 
@@ -1019,7 +1030,8 @@ msgid "Invalid %q pin"
 msgstr "Ungültiger %q pin"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1248,6 +1260,7 @@ msgid "No CCCD for this Characteristic"
 msgstr "Kein CCCD für diese Charakteristik"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Kein DAC im Chip vorhanden"
@@ -1450,6 +1463,7 @@ msgstr "Zugang verweigert"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3229,6 +3243,7 @@ msgstr "pow() drittes Argument darf nicht 0 sein"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow () mit 3 Argumenten erfordert Integer"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3236,6 +3251,7 @@ msgstr "pow () mit 3 Argumenten erfordert Integer"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3506,6 +3522,10 @@ msgstr "Typ ist kein akzeptierter Basis-Typ"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "Typ vom Objekt '%q' hat kein Attribut '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "Typ akzeptiert 1 oder 3 Argumente"

locale/el.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -245,6 +245,10 @@ msgstr ""
 msgid "'return' outside function"
 msgstr ""
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr ""
@@ -270,6 +274,10 @@ msgstr ""
 msgid "A hardware interrupt channel is already in use"
 msgstr ""
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -284,6 +292,7 @@ msgid "All I2C peripherals are in use"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -891,6 +900,7 @@ msgid "File exists"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -927,7 +937,8 @@ msgid "Group full"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
@@ -997,7 +1008,8 @@ msgid "Invalid %q pin"
 msgstr ""
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1224,6 +1236,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
@@ -1420,6 +1433,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3143,6 +3157,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3150,6 +3165,7 @@ msgstr ""
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3417,6 +3433,10 @@ msgstr ""
 msgid "type object '%q' has no attribute '%q'"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr ""

locale/es.po

@@ -7,9 +7,9 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
-"PO-Revision-Date: 2020-10-01 21:24+0000\n"
+"PO-Revision-Date: 2020-10-09 17:19+0000\n"
-"Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
+"Last-Translator: dherrada <dylan.herrada@adafruit.com>\n"
 "Language-Team: \n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
@@ -253,6 +253,10 @@ msgstr "'label' requiere 1 argumento"
 msgid "'return' outside function"
 msgstr "'return' fuera de una función"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' fuera de una función"
@@ -278,6 +282,10 @@ msgstr "pow() con 3 argumentos no soportado"
 msgid "A hardware interrupt channel is already in use"
 msgstr "El canal EXTINT ya está siendo utilizado"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -292,6 +300,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Todos los periféricos I2C están siendo usados"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr "Todos los FIFOs de RX en uso"
 
@@ -911,6 +920,7 @@ msgid "File exists"
 msgstr "El archivo ya existe"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr "Filtros muy complejos"
 
@@ -948,7 +958,8 @@ msgid "Group full"
 msgstr "Group lleno"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "Hardware ocupado, pruebe pines alternativos"
 
@@ -1020,7 +1031,8 @@ msgid "Invalid %q pin"
 msgstr "Pin %q inválido"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr "selección inválida de pin %q"
 
@@ -1247,6 +1259,7 @@ msgid "No CCCD for this Characteristic"
 msgstr "No hay CCCD para esta característica"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "El chip no tiene DAC"
@@ -1451,6 +1464,7 @@ msgstr "Permiso denegado"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -1709,7 +1723,7 @@ msgstr ""
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
-msgstr ""
+msgstr "La longitud de rgb_pins debe ser 6, 12, 18, 24, o 30"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -3219,6 +3233,7 @@ msgstr "el 3er argumento de pow() no puede ser 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() con 3 argumentos requiere enteros"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3226,6 +3241,7 @@ msgstr "pow() con 3 argumentos requiere enteros"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr "presionando botón de arranque al inicio.\n"
 
@@ -3496,6 +3512,10 @@ msgstr "type no es un tipo de base aceptable"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "objeto de tipo '%q' no tiene atributo '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "type acepta 1 ó 3 argumentos"
@@ -3604,7 +3624,7 @@ msgstr "el tiempo de espera del perro guardián debe ser mayor a 0"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "width must be greater than zero"
-msgstr ""
+msgstr "el ancho debe ser mayor que cero"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"

locale/fil.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -247,6 +247,10 @@ msgstr "'label' kailangan ng 1 argument"
 msgid "'return' outside function"
 msgstr "'return' sa labas ng function"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' sa labas ng function"
@@ -272,6 +276,10 @@ msgstr "3-arg pow() hindi suportado"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Isang channel ng hardware interrupt ay ginagamit na"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, fuzzy, c-format
 msgid "Address must be %d bytes long"
@@ -286,6 +294,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Lahat ng I2C peripherals ginagamit"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -904,6 +913,7 @@ msgid "File exists"
 msgstr "Mayroong file"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -940,7 +950,8 @@ msgid "Group full"
 msgstr "Puno ang group"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
@@ -1012,7 +1023,8 @@ msgid "Invalid %q pin"
 msgstr "Mali ang %q pin"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1239,6 +1251,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Walang DAC sa chip"
@@ -1439,6 +1452,7 @@ msgstr "Walang pahintulot"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3194,6 +3208,7 @@ msgstr "pow() 3rd argument ay hindi maaring 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() na may 3 argumento kailangan ng integers"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3201,6 +3216,7 @@ msgstr "pow() na may 3 argumento kailangan ng integers"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3472,6 +3488,10 @@ msgstr "hindi puede ang type para sa base type"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "type object '%q' ay walang attribute '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "type kumuhuha ng 1 o 3 arguments"

locale/fr.po

@@ -7,9 +7,9 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
-"PO-Revision-Date: 2020-09-16 13:47+0000\n"
+"PO-Revision-Date: 2020-10-12 21:00+0000\n"
-"Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n"
+"Last-Translator: Noel Gaetan <gaetan.noel@viacesi.fr>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=utf-8\n"
@@ -102,7 +102,7 @@ msgstr "%q doit être un tuple de longueur 2"
 
 #: shared-bindings/canio/Match.c
 msgid "%q out of range"
-msgstr ""
+msgstr "%q est hors de porté"
 
 #: ports/atmel-samd/common-hal/microcontroller/Pin.c
 msgid "%q pin invalid"
@@ -254,6 +254,10 @@ msgstr "'label' nécessite 1 argument"
 msgid "'return' outside function"
 msgstr "'return' en dehors d'une fonction"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' en dehors d'une fonction"
@@ -279,6 +283,10 @@ msgstr "pow() non supporté avec 3 arguments"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Un canal d'interruptions matérielles est déjà utilisé"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr "ADC2 est utilisé pars le Wifi"
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -293,8 +301,9 @@ msgid "All I2C peripherals are in use"
 msgstr "Tous les périphériques I2C sont utilisés"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
-msgstr ""
+msgstr "Tout les RX FIFOs sont utilisé"
 
 #: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
@@ -660,7 +669,7 @@ msgstr "Code brut corrompu"
 
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
-msgstr ""
+msgstr "Impossible d'initialisé la Camera"
 
 #: ports/cxd56/common-hal/gnss/GNSS.c
 msgid "Could not initialize GNSS"
@@ -791,7 +800,7 @@ msgstr "La BCE ne fonctionne que sur 16 octets à la fois"
 
 #: ports/esp32s2/common-hal/busio/SPI.c
 msgid "ESP-IDF memory allocation failed"
-msgstr ""
+msgstr "ESP-IDF échec d'allocation de la mémoire"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
@@ -896,7 +905,7 @@ msgstr "Impossible de se connecter : délai d'expiration"
 
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Failed to init wifi"
-msgstr ""
+msgstr "Echec de l'initialisation du Wifi"
 
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
@@ -916,6 +925,7 @@ msgid "File exists"
 msgstr "Le fichier existe"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -953,7 +963,8 @@ msgid "Group full"
 msgstr "Groupe plein"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "Matériel occupé, essayez d'autres broches"
 
@@ -971,7 +982,7 @@ msgstr "Erreur d'initialisation I2C"
 
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
-msgstr ""
+msgstr "I2SOut n'est pas disponible"
 
 #: shared-bindings/aesio/aes.c
 #, c-format
@@ -1025,7 +1036,8 @@ msgid "Invalid %q pin"
 msgstr "Broche invalide pour '%q'"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1039,7 +1051,7 @@ msgstr "Fichier BMP invalide"
 
 #: shared-bindings/wifi/Radio.c
 msgid "Invalid BSSID"
-msgstr ""
+msgstr "BSSID Invalide"
 
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "Invalid DAC pin supplied"
@@ -1089,7 +1101,7 @@ msgstr "Taille de bloc de formatage invalide"
 
 #: ports/esp32s2/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency"
-msgstr ""
+msgstr "fréquence non Valide"
 
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
@@ -1212,7 +1224,7 @@ msgstr "La valeur max. de x est %d lors d'une opération miroir"
 
 #: shared-bindings/canio/Message.c
 msgid "Messages limited to 8 bytes"
-msgstr ""
+msgstr "Message limité a 8 bytes"
 
 #: supervisor/shared/safe_mode.c
 msgid "MicroPython NLR jump failed. Likely memory corruption."
@@ -1252,6 +1264,7 @@ msgid "No CCCD for this Characteristic"
 msgstr "Pas de CCCD pour cette caractéristique"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Pas de DAC sur la puce"
@@ -1324,11 +1337,11 @@ msgstr "Pas de support entier long"
 
 #: ports/esp32s2/common-hal/pwmio/PWMOut.c
 msgid "No more channels available"
-msgstr ""
+msgstr "Pas de canal supplémentaire disponible"
 
 #: ports/esp32s2/common-hal/pwmio/PWMOut.c
 msgid "No more timers available"
-msgstr ""
+msgstr "Pas d'horloge supplémentaire disponible"
 
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
@@ -1336,7 +1349,7 @@ msgstr "Plus de minuteurs disponibles sur cette broche."
 
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
-msgstr ""
+msgstr "Aucun réseau avec ce ssid"
 
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
@@ -1360,7 +1373,7 @@ msgstr "Affirmation de défaillance du Nordic Soft Device."
 
 #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
 msgid "Not a valid IP string"
-msgstr ""
+msgstr "Chaîne IP non valide"
 
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -1458,6 +1471,7 @@ msgstr "Permission refusée"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3237,6 +3251,7 @@ msgstr "le 3e argument de pow() ne peut être 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() avec 3 arguments nécessite des entiers"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3244,6 +3259,7 @@ msgstr "pow() avec 3 arguments nécessite des entiers"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3514,6 +3530,10 @@ msgstr "le type n'est pas un type de base accepté"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "l'objet de type '%q' n'a pas d'attribut '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "le type prend 1 ou 3 arguments"
@@ -3593,7 +3613,7 @@ msgstr "caractère de format '%c' (0x%x) non supporté à l'index %d"
 
 #: py/runtime.c
 msgid "unsupported type for %q: '%q'"
-msgstr "type non supporté pour %q: '%q'"
+msgstr "type non supporté pour %q : '%q'"
 
 #: py/runtime.c
 msgid "unsupported type for operator"

locale/hi.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -245,6 +245,10 @@ msgstr ""
 msgid "'return' outside function"
 msgstr ""
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr ""
@@ -270,6 +274,10 @@ msgstr ""
 msgid "A hardware interrupt channel is already in use"
 msgstr ""
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -284,6 +292,7 @@ msgid "All I2C peripherals are in use"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -891,6 +900,7 @@ msgid "File exists"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -927,7 +937,8 @@ msgid "Group full"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
@@ -997,7 +1008,8 @@ msgid "Invalid %q pin"
 msgstr ""
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1224,6 +1236,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
@@ -1420,6 +1433,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3143,6 +3157,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3150,6 +3165,7 @@ msgstr ""
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3417,6 +3433,10 @@ msgstr ""
 msgid "type object '%q' has no attribute '%q'"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr ""

locale/it_IT.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -246,6 +246,10 @@ msgstr "'label' richiede 1 argomento"
 msgid "'return' outside function"
 msgstr "'return' al di fuori della funzione"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' al di fuori della funzione"
@@ -271,6 +275,10 @@ msgstr "pow() con tre argmomenti non supportata"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Un canale di interrupt hardware è già in uso"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, fuzzy, c-format
 msgid "Address must be %d bytes long"
@@ -285,6 +293,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Tutte le periferiche I2C sono in uso"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -904,6 +913,7 @@ msgid "File exists"
 msgstr "File esistente"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -940,7 +950,8 @@ msgid "Group full"
 msgstr "Gruppo pieno"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
@@ -1012,7 +1023,8 @@ msgid "Invalid %q pin"
 msgstr "Pin %q non valido"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1243,6 +1255,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Nessun DAC sul chip"
@@ -1448,6 +1461,7 @@ msgstr "Permesso negato"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3201,6 +3215,7 @@ msgstr "il terzo argomento di pow() non può essere 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() con 3 argomenti richiede interi"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3208,6 +3223,7 @@ msgstr "pow() con 3 argomenti richiede interi"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3479,6 +3495,10 @@ msgstr "il tipo non è un tipo di base accettabile"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "l'oggetto di tipo '%q' non ha l'attributo '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "tipo prende 1 o 3 argomenti"

locale/ja.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: 2020-09-25 18:20+0000\n"
 "Last-Translator: Taku Fukada <naninunenor@gmail.com>\n"
 "Language-Team: none\n"
@@ -252,6 +252,10 @@ msgstr ""
 msgid "'return' outside function"
 msgstr "関数外でのreturn"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "関数外でのyield"
@@ -277,6 +281,10 @@ msgstr "引数3つのpow()は非対応"
 msgid "A hardware interrupt channel is already in use"
 msgstr "ハードウェア割り込みチャネルは使用中"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -291,6 +299,7 @@ msgid "All I2C peripherals are in use"
 msgstr "全てのI2C周辺機器が使用中"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr "全てのRX FIFOが使用中"
 
@@ -904,6 +913,7 @@ msgid "File exists"
 msgstr "ファイルが存在します"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -940,7 +950,8 @@ msgid "Group full"
 msgstr "グループが一杯"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "ハードウェアビジー。代替のピンを試してください"
 
@@ -1012,7 +1023,8 @@ msgid "Invalid %q pin"
 msgstr "不正な%qピン"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr "不正な%qピン選択"
 
@@ -1239,6 +1251,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "チップにDACがありません"
@@ -1438,6 +1451,7 @@ msgstr "パーミッション拒否"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3175,6 +3189,7 @@ msgstr "pow()の3つ目の引数は0にできません"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow()の第3引数には整数が必要"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3182,6 +3197,7 @@ msgstr "pow()の第3引数には整数が必要"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3450,6 +3466,10 @@ msgstr "この型はベース型にできません"
 msgid "type object '%q' has no attribute '%q'"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "typeは1つか3つの引数をとります"

locale/ko.po

@@ -6,14 +6,16 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
-"PO-Revision-Date: 2019-05-06 14:22-0700\n"
+"PO-Revision-Date: 2020-10-05 12:12+0000\n"
-"Last-Translator: \n"
+"Last-Translator: Michal Čihař <michal@cihar.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: ko\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Weblate 4.3-dev\n"
 
 #: main.c
 msgid ""
@@ -156,7 +158,7 @@ msgstr "'%s' 에는 라벨이 필요합니다"
 #: py/emitinlinethumb.c py/emitinlinextensa.c
 #, c-format
 msgid "'%s' expects a register"
-msgstr "'%s%' 에는 레지스터가 필요합니다"
+msgstr "'%s' 에는 레지스터가 필요합니다"
 
 #: py/emitinlinethumb.c
 #, c-format
@@ -246,6 +248,10 @@ msgstr "'label' 에는 1 개의 독립변수가 필요합니다"
 msgid "'return' outside function"
 msgstr "'return' 는 함수 외부에 존재합니다"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' 는 함수 외부에 존재합니다"
@@ -271,6 +277,10 @@ msgstr ""
 msgid "A hardware interrupt channel is already in use"
 msgstr ""
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -285,6 +295,7 @@ msgid "All I2C peripherals are in use"
 msgstr "사용중인 모든 I2C주변 기기"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -894,6 +905,7 @@ msgid "File exists"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -930,7 +942,8 @@ msgid "Group full"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
@@ -1000,7 +1013,8 @@ msgid "Invalid %q pin"
 msgstr ""
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1227,6 +1241,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
@@ -1423,6 +1438,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3147,6 +3163,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3154,6 +3171,7 @@ msgstr ""
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3421,6 +3439,10 @@ msgstr ""
 msgid "type object '%q' has no attribute '%q'"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr ""

locale/nl.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: 2020-09-09 16:05+0000\n"
 "Last-Translator: Jelle Jager <jell@jjc.id.au>\n"
 "Language-Team: none\n"
@@ -250,6 +250,10 @@ msgstr "'label' vereist 1 argument"
 msgid "'return' outside function"
 msgstr "'return' buiten de functie"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' buiten de functie"
@@ -275,6 +279,10 @@ msgstr "3-arg pow() niet ondersteund"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Een hardware interrupt kanaal is al in gebruik"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -289,6 +297,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Alle I2C peripherals zijn in gebruik"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -904,6 +913,7 @@ msgid "File exists"
 msgstr "Bestand bestaat"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -942,7 +952,8 @@ msgid "Group full"
 msgstr "Groep is vol"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "Hardware bezig, probeer alternatieve pinnen"
 
@@ -1014,7 +1025,8 @@ msgid "Invalid %q pin"
 msgstr "Ongeldige %q pin"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr "Ongeldige %q pin selectie"
 
@@ -1241,6 +1253,7 @@ msgid "No CCCD for this Characteristic"
 msgstr "Geen CCCD voor deze Characteristic"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Geen DAC op de chip"
@@ -1446,6 +1459,7 @@ msgstr "Toegang geweigerd"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3204,6 +3218,7 @@ msgstr "derde argument van pow() mag geen 0 zijn"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() met 3 argumenten vereist integers"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3211,6 +3226,7 @@ msgstr "pow() met 3 argumenten vereist integers"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3480,6 +3496,10 @@ msgstr "type is geen aanvaardbaar basistype"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "objecttype '%q' heeft geen attribuut '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "type accepteert 1 of 3 argumenten"

locale/pl.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
 "PO-Revision-Date: 2020-09-29 01:39+0000\n"
 "Last-Translator: Maciej Stankiewicz <tawezik@gmail.com>\n"
 "Language-Team: pl\n"
@@ -252,6 +252,10 @@ msgstr "'label' wymaga 1 argumentu"
 msgid "'return' outside function"
 msgstr "'return' poza funkcją"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' poza funkcją"
@@ -277,6 +281,10 @@ msgstr "3-argumentowy pow() jest niewspierany"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Kanał przerwań sprzętowych w użyciu"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -291,6 +299,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Wszystkie peryferia I2C w użyciu"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr ""
 
@@ -904,6 +913,7 @@ msgid "File exists"
 msgstr "Plik istnieje"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr ""
 
@@ -940,7 +950,8 @@ msgid "Group full"
 msgstr "Grupa pełna"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "Sprzęt zajęty, wypróbuj alternatywne piny"
 
@@ -1012,7 +1023,8 @@ msgid "Invalid %q pin"
 msgstr "Zła nóżka %q"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr ""
 
@@ -1240,6 +1252,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Brak DAC"
@@ -1436,6 +1449,7 @@ msgstr "Odmowa dostępu"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -3167,6 +3181,7 @@ msgstr "trzeci argument pow() nie może być 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3174,6 +3189,7 @@ msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr ""
 
@@ -3442,6 +3458,10 @@ msgstr "typ nie może być bazowy"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "typ '%q' nie ma atrybutu '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "type wymaga 1 lub 3 argumentów"

locale/pt_BR.po

@@ -5,8 +5,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
-"PO-Revision-Date: 2020-10-01 14:20+0000\n"
+"PO-Revision-Date: 2020-10-13 17:11+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -254,6 +254,10 @@ msgstr "'label' exige 1 argumento"
 msgid "'return' outside function"
 msgstr "função externa 'return'"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr "'yield a partir' de dentro da função async"
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "função externa 'yield'"
@@ -279,6 +283,10 @@ msgstr "3-arg pow() não compatível"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Um canal de interrupção de hardware já está em uso"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr "O ADC2 está sendo usado pelo WiFi"
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -293,6 +301,7 @@ msgid "All I2C peripherals are in use"
 msgstr "Todos os periféricos I2C estão em uso"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr "Todos os FIFOs RX estão em uso"
 
@@ -913,6 +922,7 @@ msgid "File exists"
 msgstr "Arquivo já existe"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr "Os filtros são muito complexos"
 
@@ -951,7 +961,8 @@ msgid "Group full"
 msgstr "Grupo cheio"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "O hardware está ocupado, tente os pinos alternativos"
 
@@ -1023,7 +1034,8 @@ msgid "Invalid %q pin"
 msgstr "Pino do %q inválido"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr "Seleção inválida dos pinos %q"
 
@@ -1250,6 +1262,7 @@ msgid "No CCCD for this Characteristic"
 msgstr "Não há nenhum CCCD para esta característica"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Nenhum DAC no chip"
@@ -1455,6 +1468,7 @@ msgstr "Permissão negada"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -1717,7 +1731,7 @@ msgstr ""
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
-msgstr ""
+msgstr "O comprimento dos rgb_pins devem ser 6, 12, 18, 24, ou 30"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -3234,6 +3248,7 @@ msgstr "O terceiro argumento pow() não pode ser 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "o pow() com 3 argumentos requer números inteiros"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3241,6 +3256,7 @@ msgstr "o pow() com 3 argumentos requer números inteiros"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr "pressionando o botão de boot na inicialização.\n"
 
@@ -3510,6 +3526,10 @@ msgstr "tipo não é um tipo base aceitável"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "o objeto tipo '%q' não possuí atributo '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr "o tipo do objeto 'generator' não possui qualquer atributo '__await__'"
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "o tipo usa 1 ou 3 argumentos"
@@ -3618,7 +3638,7 @@ msgstr "o tempo limite do watchdog deve ser maior que 0"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "width must be greater than zero"
-msgstr ""
+msgstr "a largura deve ser maior que zero"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"

locale/sv.po

@@ -5,8 +5,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
-"PO-Revision-Date: 2020-10-01 21:24+0000\n"
+"PO-Revision-Date: 2020-10-02 22:53+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -250,6 +250,10 @@ msgstr "'label' kräver 1 argument"
 msgid "'return' outside function"
 msgstr "'return' utanför funktion"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr ""
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' utanför funktion"
@@ -275,6 +279,10 @@ msgstr "3-arguments pow() stöds inte"
 msgid "A hardware interrupt channel is already in use"
 msgstr "En kanal för hårdvaruavbrott används redan"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr ""
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -289,6 +297,7 @@ msgid "All I2C peripherals are in use"
 msgstr "All I2C-kringutrustning används"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
 msgstr "Alla RX FIFO i bruk"
 
@@ -904,6 +913,7 @@ msgid "File exists"
 msgstr "Filen finns redan"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
 msgstr "Filter för komplexa"
 
@@ -940,7 +950,8 @@ msgid "Group full"
 msgstr "Gruppen är full"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "Hårdvaran är upptagen, prova alternativa pinnar"
 
@@ -1012,7 +1023,8 @@ msgid "Invalid %q pin"
 msgstr "Ogiltig %q-pinne"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr "Ogiltigt val av %q pinne"
 
@@ -1240,6 +1252,7 @@ msgid "No CCCD for this Characteristic"
 msgstr "Ingen CCCD för denna karaktäristik"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Ingen DAC på chipet"
@@ -1443,6 +1456,7 @@ msgstr "Åtkomst nekad"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -1702,7 +1716,7 @@ msgstr ""
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
-msgstr ""
+msgstr "Längden på rgb_pins vara 6, 12, 18, 24 eller 30"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -3201,6 +3215,7 @@ msgstr "pow() 3: e argument kan inte vara 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() med 3 argument kräver heltal"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3208,6 +3223,7 @@ msgstr "pow() med 3 argument kräver heltal"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
 msgstr "trycka på startknappen vid start.\n"
 
@@ -3477,6 +3493,10 @@ msgstr "typ är inte en acceptabel bastyp"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "typobjektet '%q' har inget attribut '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr ""
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "typen tar 1 eller 3 argument"
@@ -3585,7 +3605,7 @@ msgstr "watchdog timeout måste vara större än 0"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "width must be greater than zero"
-msgstr ""
+msgstr "width måste vara större än noll"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"

locale/zh_Latn_pinyin.po

@@ -6,15 +6,16 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-29 20:14-0500\n"
+"POT-Creation-Date: 2020-10-10 23:49-0700\n"
-"PO-Revision-Date: 2019-04-13 10:10-0700\n"
+"PO-Revision-Date: 2020-10-13 17:11+0000\n"
-"Last-Translator: hexthat\n"
+"Last-Translator: hexthat <hexthat@gmail.com>\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
-"Language: zh\n"
+"Language: zh_Latn_pinyin\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Poedit 2.2.1\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Weblate 4.3-dev\n"
 
 #: main.c
 msgid ""
@@ -99,7 +100,7 @@ msgstr "%q bìxū shì chángdù wèi 2 de yuán zǔ"
 
 #: shared-bindings/canio/Match.c
 msgid "%q out of range"
-msgstr ""
+msgstr "%q chāochū fànwéi"
 
 #: ports/atmel-samd/common-hal/microcontroller/Pin.c
 msgid "%q pin invalid"
@@ -119,7 +120,7 @@ msgstr "xūyào '%q' cānshù"
 
 #: py/runtime.c
 msgid "'%q' object cannot assign attribute '%q'"
-msgstr "'%q' duì xiàng wú fǎ fēn pèi shǔ xìng  '%q'"
+msgstr "'%q' duì xiàng wú fǎ fēn pèi shǔ xìng '%q'"
 
 #: py/proto.c
 msgid "'%q' object does not support '%q'"
@@ -251,6 +252,10 @@ msgstr "'label' xūyào 1 cānshù"
 msgid "'return' outside function"
 msgstr "'return' wàibù gōngnéng"
 
+#: py/compile.c
+msgid "'yield from' inside async function"
+msgstr "Yì bù hán shù zhōng de 'yield from'"
+
 #: py/compile.c
 msgid "'yield' outside function"
 msgstr "'yield' wàibù gōngnéng"
@@ -276,6 +281,10 @@ msgstr "bù zhīchí 3-arg pow ()"
 msgid "A hardware interrupt channel is already in use"
 msgstr "Yìngjiàn zhōngduàn tōngdào yǐ zài shǐyòng zhōng"
 
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
+msgid "ADC2 is being used by WiFi"
+msgstr "ADC2 zhèng yóu WiFi shǐ yòng"
+
 #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
 #, c-format
 msgid "Address must be %d bytes long"
@@ -290,8 +299,9 @@ msgid "All I2C peripherals are in use"
 msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "All RX FIFOs in use"
-msgstr ""
+msgstr "Suǒyǒu shǐyòng zhōng de RX FIFO"
 
 #: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
@@ -330,11 +340,11 @@ msgstr "Suǒyǒu jìshí qì shǐyòng"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Already advertising."
-msgstr "Mùqián zhèngzài guǎngbò"
+msgstr "Mùqián zhèngzài guǎngbò."
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
 msgid "Already have all-matches listener"
-msgstr ""
+msgstr "yǐ jù yǒu quán pǐ pèi zhēn tīng qì"
 
 #: shared-module/memorymonitor/AllocationAlarm.c
 #: shared-module/memorymonitor/AllocationSize.c
@@ -343,7 +353,7 @@ msgstr "yǐ zài yùn xíng"
 
 #: ports/esp32s2/common-hal/wifi/Radio.c
 msgid "Already scanning for wifi networks"
-msgstr ""
+msgstr "yǐ jīng sǎo miáo WIFI wǎng luò"
 
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
@@ -391,7 +401,7 @@ msgstr "MicroPython VM zài wèi yùnxíng shí chángshì fēnpèi duī."
 
 #: shared-bindings/wifi/Radio.c
 msgid "Authentication failure"
-msgstr ""
+msgstr "shēn fèn yàn zhèng shī bài"
 
 #: main.c
 msgid "Auto-reload is off.\n"
@@ -454,7 +464,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè. Yīnggāi shì %d zì jié."
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Buffer is not a bytearray."
-msgstr "Huǎnchōng qū bùshì bytearray"
+msgstr "Huǎnchōng qū bùshì bytearray."
 
 #: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
@@ -508,7 +518,7 @@ msgstr "CBC kuài bì xū shì 16 zì jié de bèi shù"
 
 #: py/objtype.c
 msgid "Call super().__init__() before accessing native object."
-msgstr "Zài fǎngwèn běn jī wùjiàn zhīqián diàoyòng super().__init__()"
+msgstr "Zài fǎngwèn běn jī wùjiàn zhīqián diàoyòng super().__init__()."
 
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
@@ -516,7 +526,7 @@ msgstr "Wúfǎ jiāng CCCD shèzhì wéi běndì tèzhēng"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot create a new Adapter; use _bleio.adapter;"
-msgstr ""
+msgstr "Wúfǎ chuàngjiàn xīn de shìpèiqì; shǐyòng_bleio.Adapter;"
 
 #: shared-bindings/displayio/Bitmap.c
 #: shared-bindings/memorymonitor/AllocationSize.c
@@ -607,7 +617,7 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython was unable to allocate the heap.\n"
-msgstr ""
+msgstr "CircuitPython wúfǎ fēnpèi duī.\n"
 
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
@@ -646,7 +656,7 @@ msgstr "Sǔnhuài de yuánshǐ dàimǎ"
 
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Could not initialize Camera"
-msgstr ""
+msgstr "Wúfǎ chūshǐhuà xiàngjī"
 
 #: ports/cxd56/common-hal/gnss/GNSS.c
 msgid "Could not initialize GNSS"
@@ -683,7 +693,7 @@ msgstr "Wúfǎ chóngqǐ PWM"
 
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 msgid "Could not retrieve clock"
-msgstr ""
+msgstr "Wúfǎ huòqǔ shízhōng"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
@@ -777,7 +787,7 @@ msgstr "ECB yí cì zhǐ shǐ yòng 16 gè zì jié"
 
 #: ports/esp32s2/common-hal/busio/SPI.c
 msgid "ESP-IDF memory allocation failed"
-msgstr ""
+msgstr "ESP-IDF nèicún fēnpèi shībài"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
@@ -804,7 +814,7 @@ msgstr "Yùqí de tèdiǎn"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Expected a DigitalInOut"
-msgstr ""
+msgstr "yù qī shù zì huà"
 
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
@@ -812,7 +822,7 @@ msgstr "Yùqí fúwù"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Expected a UART"
-msgstr ""
+msgstr "qī dài UART"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
 #: shared-bindings/_bleio/Service.c
@@ -838,7 +848,7 @@ msgstr "FFT jǐn wéi ndarrays dìng yì"
 
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Failed SSL handshake"
-msgstr ""
+msgstr "SSL wòshǒu shībài"
 
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
@@ -865,11 +875,11 @@ msgstr "Fēnpèi RX huǎnchōng qū%d zì jié shībài"
 
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Failed to allocate Wifi memory"
-msgstr ""
+msgstr "Wúfǎ fēnpèi Wifi nèicún"
 
 #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
 msgid "Failed to allocate wifi scan memory"
-msgstr ""
+msgstr "Wúfǎ fēnpèi wifi sǎomiáo nèicún"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
@@ -881,7 +891,7 @@ msgstr "Liánjiē shībài: Chāoshí"
 
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Failed to init wifi"
-msgstr ""
+msgstr "Wúfǎ chūshǐhuà wifi"
 
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
@@ -901,12 +911,13 @@ msgid "File exists"
 msgstr "Wénjiàn cúnzài"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
+#: ports/stm/common-hal/canio/Listener.c
 msgid "Filters too complex"
-msgstr ""
+msgstr "guò lǜ qì tài fù zá"
 
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
-msgstr ""
+msgstr "Bù zhīyuán géshì"
 
 #: shared-module/framebufferio/FramebufferDisplay.c
 #, c-format
@@ -937,7 +948,8 @@ msgid "Group full"
 msgstr "Fēnzǔ yǐ mǎn"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Hardware busy, try alternative pins"
 msgstr "Yìngjiàn máng, qǐng chángshì qítā zhēnjiǎo"
 
@@ -976,7 +988,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "Input taking too long"
-msgstr ""
+msgstr "Shūrù shíjiānguò zhǎng"
 
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
@@ -1009,7 +1021,8 @@ msgid "Invalid %q pin"
 msgstr "Wúxiào de %q yǐn jiǎo"
 
 #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
+#: ports/stm/common-hal/sdioio/SDCard.c
 msgid "Invalid %q pin selection"
 msgstr "wú xiào %q yǐn jiǎo xuǎn zé"
 
@@ -1023,7 +1036,7 @@ msgstr "Wúxiào de BMP wénjiàn"
 
 #: shared-bindings/wifi/Radio.c
 msgid "Invalid BSSID"
-msgstr ""
+msgstr "Wúxiào de BSSID"
 
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "Invalid DAC pin supplied"
@@ -1073,7 +1086,7 @@ msgstr "Géshì kuài dàxiǎo wúxiào"
 
 #: ports/esp32s2/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency"
-msgstr ""
+msgstr "Wúxiào de pínlǜ"
 
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
@@ -1196,7 +1209,7 @@ msgstr "Jìngxiàng shí de zuìdà X zhí wèi%d"
 
 #: shared-bindings/canio/Message.c
 msgid "Messages limited to 8 bytes"
-msgstr ""
+msgstr "Yóujiàn xiànzhì wèi 8 gè zì jié"
 
 #: supervisor/shared/safe_mode.c
 msgid "MicroPython NLR jump failed. Likely memory corruption."
@@ -1236,6 +1249,7 @@ msgid "No CCCD for this Characteristic"
 msgstr "Zhège tèzhēng méiyǒu CCCD"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/esp32s2/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr "Méiyǒu DAC zài xīnpiàn shàng de"
@@ -1308,11 +1322,11 @@ msgstr "Méiyǒu zhǎng zhěngshù zhīchí"
 
 #: ports/esp32s2/common-hal/pwmio/PWMOut.c
 msgid "No more channels available"
-msgstr ""
+msgstr "Méiyǒu gèng duō kěyòng píndào"
 
 #: ports/esp32s2/common-hal/pwmio/PWMOut.c
 msgid "No more timers available"
-msgstr ""
+msgstr "Méiyǒu gèng duō kěyòng de jìshí qì"
 
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
@@ -1320,7 +1334,7 @@ msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì."
 
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
-msgstr ""
+msgstr "Méiyǒu wǎngluò yǔ gāi ssid"
 
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
@@ -1344,7 +1358,7 @@ msgstr "Nordic ruǎn shèbèi gùzhàng shēngmíng."
 
 #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
 msgid "Not a valid IP string"
-msgstr ""
+msgstr "Wúxiào de IP zìfú chuàn"
 
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -1362,7 +1376,7 @@ msgstr "Méiyǒu yùnxíng yǐ bǎocún de dàimǎ.\n"
 
 #: shared-bindings/_bleio/__init__.c
 msgid "Not settable"
-msgstr ""
+msgstr "bù kě shè zhì"
 
 #: shared-bindings/util.c
 msgid ""
@@ -1380,11 +1394,11 @@ msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi "
 
 #: ports/esp32s2/common-hal/socketpool/SocketPool.c
 msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
+msgstr "Jǐn zhīchí IPv4 SOCK_STREAM tào jiē zì"
 
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
-msgstr ""
+msgstr "Jǐn zhīchí IPv4 dìzhǐ"
 
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
@@ -1405,11 +1419,11 @@ msgstr ""
 
 #: shared-bindings/ipaddress/__init__.c
 msgid "Only raw int supported for ip"
-msgstr ""
+msgstr "Ip jǐn zhīchí raw int"
 
 #: ports/esp32s2/common-hal/socketpool/SocketPool.c
 msgid "Out of sockets"
-msgstr ""
+msgstr "tào jiē zì wài"
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
@@ -1438,6 +1452,7 @@ msgstr "Quánxiàn bèi jùjué"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
@@ -1479,7 +1494,7 @@ msgstr "Duōbiānxíng zhìshǎo xūyào 3 diǎn"
 msgid ""
 "Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
 "instead"
-msgstr ""
+msgstr "Duānkǒu bù jiēshòu PWM zàibō. Tōngguò yǐn jiǎo, pínlǜ hé zhàn kōng bǐ"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
@@ -1489,6 +1504,7 @@ msgid ""
 "Port does not accept pins or frequency. Construct and pass a PWMOut Carrier "
 "instead"
 msgstr ""
+"Duānkǒu bù jiēshòu yǐn jiǎo huò pínlǜ. Gòuzào bìng chuándì PWMOut zàibō"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Prefix buffer must be on the heap"
@@ -1552,7 +1568,7 @@ msgstr "Shuāxīn tài kuàile"
 
 #: shared-bindings/canio/RemoteTransmissionRequest.c
 msgid "RemoteTransmissionRequests limited to 8 bytes"
-msgstr ""
+msgstr "RemoteTransmissionRequests xiànzhì wèi 8 gè zì jié"
 
 #: shared-bindings/aesio/aes.c
 msgid "Requested AES mode is unsupported"
@@ -1568,7 +1584,7 @@ msgstr "Xíng xiàng bìxū shì digitalio.DigitalInOut"
 
 #: main.c
 msgid "Running in safe mode! "
-msgstr "Zài ānquán móshì xià yùnxíng!"
+msgstr "Zài ānquán móshì xià yùnxíng! "
 
 #: shared-module/sdcardio/SDCard.c
 msgid "SD card CSD format not supported"
@@ -1625,11 +1641,11 @@ msgstr "Xùliè huà yǐjīng shǐyòngguò"
 
 #: shared-bindings/ssl/SSLContext.c
 msgid "Server side context cannot have hostname"
-msgstr ""
+msgstr "Fúwùqì duān shàngxiàwén bùnéng jùyǒu zhǔjī míng"
 
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
-msgstr ""
+msgstr "bù zhī chí dà xiǎo"
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
@@ -1644,7 +1660,7 @@ msgstr "Qiēpiàn bù shòu zhīchí"
 
 #: ports/esp32s2/common-hal/socketpool/SocketPool.c
 msgid "SocketPool can only be used with wifi.radio"
-msgstr ""
+msgstr "SocketPool zhǐ néng yǔ wifi.Radio yīqǐ shǐyòng"
 
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
@@ -1692,7 +1708,7 @@ msgstr ""
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
-msgstr ""
+msgstr "Rgb_pins de chángdù bìxū wèi 6,12,18,24 huò 30"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -1823,7 +1839,7 @@ msgstr "Wúfǎ fēnpèi huǎnchōng qū yòng yú qiānmíng zhuǎnhuàn"
 
 #: ports/esp32s2/common-hal/busio/I2C.c
 msgid "Unable to create lock"
-msgstr ""
+msgstr "Wúfǎ chuàngjiàn suǒ"
 
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
@@ -1854,11 +1870,11 @@ msgstr "Yìwài de nrfx uuid lèixíng"
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 #, c-format
 msgid "Unhandled ESP TLS error %d %d %x %d"
-msgstr ""
+msgstr "Wèi chǔlǐ de ESP TLS cuòwù %d %d %x %d"
 
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
-msgstr ""
+msgstr "Wèizhī gùzhàng"
 
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
@@ -1946,7 +1962,7 @@ msgstr "WatchDogTimer dāngqián wèi yùnxíng"
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET"
 msgstr ""
-"Yīdàn shèzhì wèi WatchDogMode.RESET, zé bùnéng gēnggǎi WatchDogTimer.Mode."
+"Yīdàn shèzhì wèi WatchDogMode.RESET, zé bùnéng gēnggǎi WatchDogTimer.Mode"
 
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer.timeout must be greater than 0"
@@ -1967,13 +1983,14 @@ msgid ""
 msgstr ""
 "Huānyíng lái dào Adafruit CircuitPython%s!\n"
 "\n"
-"Qǐng fǎngwèn xuéxí. learn.Adafruit.com/category/circuitpython.\n"
+"Qǐng fǎngwèn learn.Adafruit.Com/category/circuitpython yǐ huòqǔ xiàngmù "
+"zhǐnán.\n"
 "\n"
-"Ruò yào liè chū nèizài de mókuài, qǐng qǐng zuò yǐxià `help(\"modules\")`.\n"
+"Yào liè chū nèizhì mókuài, qǐng zhíxíng `help(“modules”)`\n"
 
 #: shared-bindings/wifi/Radio.c
 msgid "WiFi password must be between 8 and 63 characters"
-msgstr ""
+msgstr "WiFi mìmǎ bìxū jiè yú 8 dào 63 gè zìfú zhī jiān"
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
@@ -1989,7 +2006,7 @@ msgstr "Nín qǐngqiú qǐdòng ānquán móshì "
 
 #: py/objtype.c
 msgid "__init__() should return None"
-msgstr "__init__() fǎnhuí  not"
+msgstr "__init__() fǎnhuí not"
 
 #: py/objtype.c
 msgid "__init__() should return None, not '%q'"
@@ -2145,7 +2162,7 @@ msgstr "zì jié > 8 wèi"
 
 #: py/objarray.c
 msgid "bytes length not a multiple of item size"
-msgstr ""
+msgstr "zì jié chángdù, bùshì xiàngmù dàxiǎo de bèishù"
 
 #: py/objstr.c
 msgid "bytes value out of range"
@@ -2405,7 +2422,8 @@ msgstr "mòrèn 'except' bìxū shì zuìhòu yīgè"
 msgid ""
 "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
 msgstr ""
-"mùbiāo huǎnchōng qū bìxū shì zì yǎnlèi huò lèixíng 'B' wèi wèi shēndù = 8"
+"Duìyú bit_depth = 8, mùbiāo huǎnchōng qū bìxū shì zì jié shùzǔ huò lèixíng "
+"wèi 'B' de shùzǔ"
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
@@ -2463,11 +2481,11 @@ msgstr "lìwài bìxū láizì BaseException"
 
 #: shared-bindings/canio/CAN.c
 msgid "expected '%q' but got '%q'"
-msgstr ""
+msgstr "yùqí wèi'%q'dàn dédàole'%q'"
 
 #: shared-bindings/canio/CAN.c
 msgid "expected '%q' or '%q' but got '%q'"
-msgstr ""
+msgstr "yùqí wèi'%q'huò'%q', dàn huòdéle'%q'"
 
 #: py/objstr.c
 msgid "expected ':' after format specifier"
@@ -2680,7 +2698,7 @@ msgstr "chūshǐ zhí bìxū shì kě diédài de"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
 msgid "initial_value length is wrong"
-msgstr ""
+msgstr "Initial_value chángdù cuòwù"
 
 #: py/compile.c
 msgid "inline assembler must be a function"
@@ -2877,7 +2895,7 @@ msgstr "Dāng gùdìng chángdù wèi %s shí, zuìdà chángdù bìxū wèi 0-%
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
 msgid "max_length must be > 0"
-msgstr ""
+msgstr "Max_length bìxū > 0"
 
 #: py/runtime.c
 msgid "maximum recursion depth exceeded"
@@ -2937,9 +2955,8 @@ msgid "name reused for argument"
 msgstr "cān shǔ míngchēng bèi chóngxīn shǐyòng"
 
 #: py/emitnative.c
-#, fuzzy
 msgid "native yield"
-msgstr "yuánshēng chǎnliàng"
+msgstr "yuán chǎn"
 
 #: py/runtime.c
 #, c-format
@@ -3116,11 +3133,11 @@ msgstr "ord() yùqí zìfú, dàn chángdù zìfú chuàn %d"
 
 #: shared-bindings/displayio/Bitmap.c
 msgid "out of range of source"
-msgstr ""
+msgstr "yuán fàn wéi wài"
 
 #: shared-bindings/displayio/Bitmap.c
 msgid "out of range of target"
-msgstr ""
+msgstr "mù biāo fàn wéi wài"
 
 #: py/objint_mpz.c
 msgid "overflow converting long int to machine word"
@@ -3129,7 +3146,7 @@ msgstr "chāo gāo zhuǎnhuàn zhǎng zhěng shùzì shí"
 #: py/modstruct.c
 #, c-format
 msgid "pack expected %d items for packing (got %d)"
-msgstr ""
+msgstr "bāo zhuāng yù qī de %d bāo zhuāng xiàng mù （dé dào %d)"
 
 #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
 msgid "palette must be 32 bytes long"
@@ -3169,7 +3186,7 @@ msgstr "duōbiānxíng zhī néng zài yīgè fù jí zhōng zhùcè"
 
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 msgid "pop from an empty PulseIn"
-msgstr "cóng kōng de PulseIn dànchū dànchū"
+msgstr "cóng kōng mài chōng tán chū"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
@@ -3187,6 +3204,7 @@ msgstr "pow() 3 cān shǔ bùnéng wéi 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
 
+#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3194,8 +3212,9 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
 #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
 #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
 #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
 msgid "pressing boot button at start up.\n"
-msgstr ""
+msgstr "Zài qǐdòng shí àn qǐdòng ànniǔ.\n"
 
 #: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
 #: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
@@ -3203,7 +3222,7 @@ msgstr ""
 #: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
 #: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
 msgid "pressing both buttons at start up.\n"
-msgstr ""
+msgstr "zài qǐdòng shí tóngshí àn xià liǎng gè ànniǔ.\n"
 
 #: extmod/modutimeq.c
 msgid "queue overflow"
@@ -3250,7 +3269,7 @@ msgstr "yòubiān bìxū shì ndarray huò biāoliàng"
 
 #: py/objstr.c
 msgid "rsplit(None,n)"
-msgstr ""
+msgstr "Rchāifēn(wú ，N）"
 
 #: shared-bindings/audiocore/RawSample.c
 msgid ""
@@ -3330,7 +3349,7 @@ msgstr "sosfilt xūyào diédài cānshù"
 
 #: shared-bindings/displayio/Bitmap.c
 msgid "source palette too large"
-msgstr ""
+msgstr "yuán miànbǎn tài dà"
 
 #: py/objstr.c
 msgid "start/end indices"
@@ -3463,6 +3482,10 @@ msgstr "lèixíng bùshì kě jiēshòu de jīchǔ lèixíng"
 msgid "type object '%q' has no attribute '%q'"
 msgstr "lèixíng duìxiàng '%q' méiyǒu shǔxìng '%q'"
 
+#: py/objgenerator.c
+msgid "type object 'generator' has no attribute '__await__'"
+msgstr "lèi xíng duì xiàng 'generator' méi yǒu shǔ xìng '__await__'"
+
 #: py/objtype.c
 msgid "type takes 1 or 3 arguments"
 msgstr "lèixíng wèi 1 huò 3 gè cānshù"
@@ -3571,7 +3594,7 @@ msgstr "kān mén gǒu chāoshí bìxū dàyú 0"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "width must be greater than zero"
-msgstr ""
+msgstr "kuāndù bìxū dàyú líng"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"

main.c

@@ -242,19 +242,24 @@ void cleanup_after_vm(supervisor_allocation* heap) {
     reset_status_led();
 }
 
+void print_code_py_status_message(safe_mode_t safe_mode) {
+    if (autoreload_is_enabled()) {
+        serial_write_compressed(translate("Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\n"));
+    } else {
+        serial_write_compressed(translate("Auto-reload is off.\n"));
+    }
+    if (safe_mode != NO_SAFE_MODE) {
+        serial_write_compressed(translate("Running in safe mode! "));
+        serial_write_compressed(translate("Not running saved code.\n"));
+    }
+}
+
 bool run_code_py(safe_mode_t safe_mode) {
     bool serial_connected_at_start = serial_connected();
     #if CIRCUITPY_AUTORELOAD_DELAY_MS > 0
     if (serial_connected_at_start) {
         serial_write("\n");
-        if (autoreload_is_enabled()) {
+        print_code_py_status_message(safe_mode);
-            serial_write_compressed(translate("Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\n"));
-        } else if (safe_mode != NO_SAFE_MODE) {
-            serial_write_compressed(translate("Running in safe mode! "));
-            serial_write_compressed(translate("Auto-reload is off.\n"));
-        } else if (!autoreload_is_enabled()) {
-            serial_write_compressed(translate("Auto-reload is off.\n"));
-        }
     }
     #endif
 
@@ -266,10 +271,7 @@ bool run_code_py(safe_mode_t safe_mode) {
 
     bool found_main = false;
 
-    if (safe_mode != NO_SAFE_MODE) {
+    if (safe_mode == NO_SAFE_MODE) {
-        serial_write_compressed(translate("Running in safe mode! "));
-        serial_write_compressed(translate("Not running saved code.\n"));
-    } else {
         new_status_color(MAIN_RUNNING);
 
         static const char * const supported_filenames[] = STRING_LIST("code.txt", "code.py", "main.py", "main.txt");
@@ -322,16 +324,8 @@ bool run_code_py(safe_mode_t safe_mode) {
         }
 
         if (!serial_connected_before_animation && serial_connected()) {
-            if (serial_connected_at_start) {
-                serial_write("\n\n");
-            }
-
             if (!serial_connected_at_start) {
-                if (autoreload_is_enabled()) {
+                print_code_py_status_message(safe_mode);
-                    serial_write_compressed(translate("Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\n"));
-                } else {
-                    serial_write_compressed(translate("Auto-reload is off.\n"));
-                }
             }
             print_safe_mode_message(safe_mode);
             serial_write("\n");
@@ -486,8 +480,10 @@ int __attribute__((used)) main(void) {
     reset_devices();
     reset_board();
 
-    // Turn on autoreload by default but before boot.py in case it wants to change it.
+    // If not in safe mode turn on autoreload by default but before boot.py in case it wants to change it.
-    autoreload_enable();
+    if (safe_mode == NO_SAFE_MODE) {
+        autoreload_enable();
+    }
 
     // By default our internal flash is readonly to local python code and
     // writable over USB. Set it here so that boot.py can change it.

ports/atmel-samd/boards/bdmicro_vina_d51/board.c

@@ -0,0 +1,48 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "boards/board.h"
+#include "mpconfigboard.h"
+
+void board_init(void)
+{
+    // struct port_config pin_conf;
+    // port_get_config_defaults(&pin_conf);
+    //
+    // pin_conf.direction  = PORT_PIN_DIR_OUTPUT;
+    // port_pin_set_config(MICROPY_HW_LED_TX, &pin_conf);
+    // port_pin_set_output_level(MICROPY_HW_LED_TX, true);
+    //
+    // port_pin_set_config(MICROPY_HW_LED_RX, &pin_conf);
+    // port_pin_set_output_level(MICROPY_HW_LED_RX, true);
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}

ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h

@@ -0,0 +1,28 @@
+#define MICROPY_HW_BOARD_NAME "BDMICRO VINA-D51"
+#define MICROPY_HW_MCU_NAME "samd51n20"
+
+#define CIRCUITPY_MCU_FAMILY samd51
+
+// These are pins not to reset.
+// Don't reset QSPI data pins
+#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11)
+#define MICROPY_PORT_B (PORT_PB10 | PORT_PB11)
+#define MICROPY_PORT_C (0)
+#define MICROPY_PORT_D (0)
+
+#define BOARD_HAS_CRYSTAL 1
+
+#define DEFAULT_I2C_BUS_SDA (&pin_PB02)
+#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
+#define DEFAULT_SPI_BUS_MISO (&pin_PB23)
+#define DEFAULT_UART_BUS_TX (&pin_PB24)
+#define DEFAULT_UART_BUS_RX (&pin_PB25)
+#define DEFAULT_SPI_BUS_MOSI (&pin_PC27)
+#define DEFAULT_SPI_BUS_SCK (&pin_PC28)
+#define MICROPY_HW_LED_STATUS (&pin_PA15)
+#define MICROPY_HW_LED_RX (&pin_PC05)
+#define MICROPY_HW_LED_TX (&pin_PC06)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24 1
+#define IGNORE_PIN_PA25 1

ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.mk

@@ -0,0 +1,12 @@
+USB_VID = 0x31e2
+USB_PID = 0x2011
+USB_PRODUCT = "VINA-D51"
+USB_MANUFACTURER = "BDMICRO LLC"
+
+CHIP_VARIANT = SAMD51N20A
+CHIP_FAMILY = samd51
+
+QSPI_FLASH_FILESYSTEM = 1
+EXTERNAL_FLASH_DEVICE_COUNT = 2
+EXTERNAL_FLASH_DEVICES = "MX25L51245G","GD25S512MD"
+LONGINT_IMPL = MPZ

ports/atmel-samd/boards/bdmicro_vina_d51/pins.c

@@ -0,0 +1,82 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PB08) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB09) },
+    { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PC00) },
+    { MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_PC01) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA04) },
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA06) },
+    { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA07) },
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB00) },
+    { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PB01) },
+    { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PB05) },
+    { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PB06) },
+    { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PB07) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PC10) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PC11) },
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA14) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA13) },
+    { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PB14) },
+    { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PB15) },
+    { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PC20) },
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PC21) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA12) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB31) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA16) },
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA17) },
+    { MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_PA02) },
+    { MP_ROM_QSTR(MP_QSTR_DAC1), MP_ROM_PTR(&pin_PA05) },
+    { MP_ROM_QSTR(MP_QSTR_ESP01_EN), MP_ROM_PTR(&pin_PC03) },
+    { MP_ROM_QSTR(MP_QSTR_ESP01_GPIO0), MP_ROM_PTR(&pin_PA18) },
+    { MP_ROM_QSTR(MP_QSTR_UART3_RTS), MP_ROM_PTR(&pin_PA18) },
+    { MP_ROM_QSTR(MP_QSTR_ESP01_GPIO2), MP_ROM_PTR(&pin_PA19) },
+    { MP_ROM_QSTR(MP_QSTR_UART3_CTS), MP_ROM_PTR(&pin_PA19) },
+    { MP_ROM_QSTR(MP_QSTR_ESP01_RESET), MP_ROM_PTR(&pin_PC02) },
+    { MP_ROM_QSTR(MP_QSTR_ESP01_RX), MP_ROM_PTR(&pin_PB21) },
+    { MP_ROM_QSTR(MP_QSTR_UART3_RX), MP_ROM_PTR(&pin_PB21) },
+    { MP_ROM_QSTR(MP_QSTR_ESP01_TX), MP_ROM_PTR(&pin_PB20) },
+    { MP_ROM_QSTR(MP_QSTR_UART3_TX), MP_ROM_PTR(&pin_PB20) },
+    { MP_ROM_QSTR(MP_QSTR_I2C_SCL), MP_ROM_PTR(&pin_PB03) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB03) },
+    { MP_ROM_QSTR(MP_QSTR_I2C_SDA), MP_ROM_PTR(&pin_PB02) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB02) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_FS_0), MP_ROM_PTR(&pin_PA20) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_FS_1), MP_ROM_PTR(&pin_PA23) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_MCK_0), MP_ROM_PTR(&pin_PB17) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_MCK_1), MP_ROM_PTR(&pin_PB13) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_SCK_0), MP_ROM_PTR(&pin_PB16) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_SCK_1), MP_ROM_PTR(&pin_PB12) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_SDI), MP_ROM_PTR(&pin_PA22) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_SDO), MP_ROM_PTR(&pin_PA21) },
+    { MP_ROM_QSTR(MP_QSTR_LED_B), MP_ROM_PTR(&pin_PA15) },
+    { MP_ROM_QSTR(MP_QSTR_LED_STATUS), MP_ROM_PTR(&pin_PA15) },
+    { MP_ROM_QSTR(MP_QSTR_LED_G), MP_ROM_PTR(&pin_PB18) },
+    { MP_ROM_QSTR(MP_QSTR_LED_R), MP_ROM_PTR(&pin_PB19) },
+    { MP_ROM_QSTR(MP_QSTR_LED_RX), MP_ROM_PTR(&pin_PC05) },
+    { MP_ROM_QSTR(MP_QSTR_LED_TX), MP_ROM_PTR(&pin_PC06) },
+    { MP_ROM_QSTR(MP_QSTR_RS485_RE), MP_ROM_PTR(&pin_PC15) },
+    { MP_ROM_QSTR(MP_QSTR_RS485_RX), MP_ROM_PTR(&pin_PC13) },
+    { MP_ROM_QSTR(MP_QSTR_RS485_TE), MP_ROM_PTR(&pin_PC14) },
+    { MP_ROM_QSTR(MP_QSTR_RS485_TX), MP_ROM_PTR(&pin_PC12) },
+    { MP_ROM_QSTR(MP_QSTR_SPI_MISO), MP_ROM_PTR(&pin_PB23) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB23) },
+    { MP_ROM_QSTR(MP_QSTR_SPI_MOSI), MP_ROM_PTR(&pin_PC27) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PC27) },
+    { MP_ROM_QSTR(MP_QSTR_SPI_SCK), MP_ROM_PTR(&pin_PC28) },
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PC28) },
+    { MP_ROM_QSTR(MP_QSTR_SPI_SS), MP_ROM_PTR(&pin_PB22) },
+    { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PB22) },
+    { MP_ROM_QSTR(MP_QSTR_UART1_CTS), MP_ROM_PTR(&pin_PC19) },
+    { MP_ROM_QSTR(MP_QSTR_UART1_RTS), MP_ROM_PTR(&pin_PC18) },
+    { MP_ROM_QSTR(MP_QSTR_UART1_RX), MP_ROM_PTR(&pin_PC17) },
+    { MP_ROM_QSTR(MP_QSTR_UART1_TX), MP_ROM_PTR(&pin_PC16) },
+    { MP_ROM_QSTR(MP_QSTR_UART2_RX), MP_ROM_PTR(&pin_PB25) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB25) },
+    { MP_ROM_QSTR(MP_QSTR_UART2_TX), MP_ROM_PTR(&pin_PB24) },
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB24) },
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk

@@ -16,6 +16,7 @@ CIRCUITPY_COUNTIO = 0
 CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_I2CPERIPHERAL = 0
 CIRCUITPY_VECTORIO = 0
+MICROPY_PY_ASYNC_AWAIT = 0
 
 SUPEROPT_GC = 0
 

ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk

@@ -15,6 +15,7 @@ LONGINT_IMPL = MPZ
 CIRCUITPY_DISPLAYIO = 0
 CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_I2CPERIPHERAL = 0
+MICROPY_PY_ASYNC_AWAIT = 0
 
 SUPEROPT_GC = 0
 CFLAGS_INLINE_LIMIT = 55

ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk

@@ -22,6 +22,7 @@ CIRCUITPY_USB_MIDI = 0
 CIRCUITPY_USB_HID = 0
 CIRCUITPY_TOUCHIO = 0
 CFLAGS_INLINE_LIMIT = 35
+
 # Make more room.
 SUPEROPT_GC = 0
 

ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk

@@ -22,6 +22,7 @@ CIRCUITPY_SAMD = 0
 CIRCUITPY_USB_MIDI = 0
 CIRCUITPY_USB_HID = 0
 CIRCUITPY_TOUCHIO = 0
+
 CFLAGS_INLINE_LIMIT = 35
 # Make more room.
 SUPEROPT_GC = 0

ports/atmel-samd/boards/matrixportal_m4/mpconfigboard.h

@@ -15,8 +15,8 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 
-#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
+#define DEFAULT_I2C_BUS_SCL (&pin_PB30)
-#define DEFAULT_I2C_BUS_SDA (&pin_PB02)
+#define DEFAULT_I2C_BUS_SDA (&pin_PB31)
 
 #define DEFAULT_SPI_BUS_SCK (&pin_PA16)
 #define DEFAULT_SPI_BUS_MOSI (&pin_PA19)

ports/atmel-samd/boards/trinket_m0_haxpress/mpconfigboard.mk

@@ -17,6 +17,7 @@ CIRCUITPY_COUNTIO = 0
 CIRCUITPY_RTC = 0
 CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_I2CPERIPHERAL = 0
+MICROPY_PY_ASYNC_AWAIT = 0
 
 SUPEROPT_GC = 0
 

ports/atmel-samd/common-hal/canio/CAN.h

@@ -41,9 +41,6 @@ typedef struct canio_can_obj {
     mp_obj_base_t base;
     Can *hw;
     canio_can_state_t *state;
-    volatile uint32_t error_warning_state_count;
-    volatile uint32_t error_passive_state_count;
-    volatile uint32_t bus_off_state_count;
     int baudrate;
     uint8_t rx_pin_number:8;
     uint8_t tx_pin_number:8;

ports/atmel-samd/common-hal/pulseio/PulseIn.h

@@ -51,7 +51,6 @@ void pulsein_reset(void);
 void pulsein_interrupt_handler(uint8_t channel);
 void pulsein_timer_interrupt_handler(uint8_t index);
 #ifdef SAMD21
-void rtc_set_continuous(void);
 void rtc_start_pulsein(void);
 void rtc_end_pulsein(void);
 #endif

ports/atmel-samd/peripherals

@@ -1 +1 @@
-Subproject commit 2ff4ab05101ce7d3e105009cc6612df6e992123f
+Subproject commit a7e39c4d01aa5916015beecb021777617e77b0ad

ports/atmel-samd/supervisor/port.c

@@ -96,19 +96,20 @@
 #endif
 volatile bool hold_interrupt = false;
 #ifdef SAMD21
+static void rtc_set_continuous(bool continuous) {
+    while (RTC->MODE0.STATUS.bit.SYNCBUSY);
+    RTC->MODE0.READREQ.reg = (continuous ? RTC_READREQ_RCONT : 0) | 0x0010;
+    while (RTC->MODE0.STATUS.bit.SYNCBUSY);
+}
+
 void rtc_start_pulsein(void) {
-    rtc_set_continuous();
+    rtc_set_continuous(true);
     hold_interrupt = true;
 }
 
 void rtc_end_pulsein(void) {
     hold_interrupt = false;
-}
+    rtc_set_continuous(false);
-
-void rtc_set_continuous(void) {
-    while (RTC->MODE0.STATUS.bit.SYNCBUSY);
-    RTC->MODE0.READREQ.reg = RTC_READREQ_RREQ | RTC_READREQ_RCONT | 0x0010;
-    while (RTC->MODE0.STATUS.bit.SYNCBUSY);
 }
 #endif
 
@@ -430,6 +431,42 @@ uint32_t port_get_saved_word(void) {
 static volatile uint64_t overflowed_ticks = 0;
 static volatile bool _ticks_enabled = false;
 
+static uint32_t _get_count(uint32_t* overflow_count) {
+    #ifdef SAM_D5X_E5X
+    while ((RTC->MODE0.SYNCBUSY.reg & (RTC_MODE0_SYNCBUSY_COUNTSYNC | RTC_MODE0_SYNCBUSY_COUNT)) != 0) {}
+    #endif
+    #ifdef SAMD21
+    // Request a read so we don't stall the bus later. See section 14.3.1.5 Read Request
+    RTC->MODE0.READREQ.reg = RTC_READREQ_RREQ | 0x0010;
+    while (RTC->MODE0.STATUS.bit.SYNCBUSY != 0) {}
+    #endif
+    // Disable interrupts so we can grab the count and the overflow.
+    common_hal_mcu_disable_interrupts();
+    uint32_t count = RTC->MODE0.COUNT.reg;
+    if (overflow_count != NULL) {
+        *overflow_count = overflowed_ticks;
+    }
+    common_hal_mcu_enable_interrupts();
+
+    return count;
+}
+
+static void _port_interrupt_after_ticks(uint32_t ticks) {
+    uint32_t current_ticks = _get_count(NULL);
+    if (ticks > 1 << 28) {
+        // We'll interrupt sooner with an overflow.
+        return;
+    }
+#ifdef SAMD21
+    if (hold_interrupt) {
+        return;
+    }
+#endif
+    RTC->MODE0.COMP[0].reg = current_ticks + (ticks << 4);
+    RTC->MODE0.INTFLAG.reg = RTC_MODE0_INTFLAG_CMP0;
+    RTC->MODE0.INTENSET.reg = RTC_MODE0_INTENSET_CMP0;
+}
+
 void RTC_Handler(void) {
     uint32_t intflag = RTC->MODE0.INTFLAG.reg;
     if (intflag & RTC_MODE0_INTFLAG_OVF) {
@@ -452,7 +489,7 @@ void RTC_Handler(void) {
             supervisor_tick();
             // Check _ticks_enabled again because a tick handler may have turned it off.
             if (_ticks_enabled) {
-                port_interrupt_after_ticks(1);
+                _port_interrupt_after_ticks(1);
             }
         }
         #endif
@@ -462,24 +499,14 @@ void RTC_Handler(void) {
     }
 }
 
-static uint32_t _get_count(void) {
-    #ifdef SAM_D5X_E5X
-    while ((RTC->MODE0.SYNCBUSY.reg & (RTC_MODE0_SYNCBUSY_COUNTSYNC | RTC_MODE0_SYNCBUSY_COUNT)) != 0) {}
-    #endif
-    #ifdef SAMD21
-    while (RTC->MODE0.STATUS.bit.SYNCBUSY != 0) {}
-    #endif
-
-    return RTC->MODE0.COUNT.reg;
-}
-
 uint64_t port_get_raw_ticks(uint8_t* subticks) {
-    uint32_t current_ticks = _get_count();
+    uint32_t overflow_count;
+    uint32_t current_ticks = _get_count(&overflow_count);
     if (subticks != NULL) {
         *subticks = (current_ticks % 16) * 2;
     }
 
-    return overflowed_ticks + current_ticks / 16;
+    return overflow_count + current_ticks / 16;
 }
 
 // Enable 1/1024 second tick.
@@ -489,8 +516,9 @@ void port_enable_tick(void) {
     RTC->MODE0.INTENSET.reg = RTC_MODE0_INTENSET_PER2;
     #endif
     #ifdef SAMD21
+    // TODO: Switch to using the PER *event* from the RTC to generate an interrupt via EVSYS.
     _ticks_enabled = true;
-    port_interrupt_after_ticks(1);
+    _port_interrupt_after_ticks(1);
     #endif
 }
 
@@ -505,20 +533,14 @@ void port_disable_tick(void) {
     #endif
 }
 
+// This is called by sleep, we ignore it when our ticks are enabled because
+// they'll wake us up earlier. If we don't, we'll mess up ticks by overwriting
+// the next RTC wake up time.
 void port_interrupt_after_ticks(uint32_t ticks) {
-    uint32_t current_ticks = _get_count();
+    if (_ticks_enabled) {
-    if (ticks > 1 << 28) {
-        // We'll interrupt sooner with an overflow.
         return;
     }
-#ifdef SAMD21
+    _port_interrupt_after_ticks(ticks);
-    if (hold_interrupt) {
-        return;
-    }
-#endif
-    RTC->MODE0.COMP[0].reg = current_ticks + (ticks << 4);
-    RTC->MODE0.INTFLAG.reg = RTC_MODE0_INTFLAG_CMP0;
-    RTC->MODE0.INTENSET.reg = RTC_MODE0_INTENSET_CMP0;
 }
 
 void port_sleep_until_interrupt(void) {

ports/esp32s2/CMakeLists.txt

@@ -6,7 +6,7 @@ set(ENV{IDF_PATH} ${CMAKE_SOURCE_DIR}/esp-idf)
 
 # The component list here determines what options we get in menuconfig and what the ninja file
 # can build.
-set(COMPONENTS esptool_py soc driver log main esp-tls mbedtls esp_event esp_netif esp_wifi lwip wpa_supplicant freertos)
+set(COMPONENTS esptool_py soc driver log main esp-tls mbedtls esp_event esp_adc_cal esp_netif esp_wifi lwip wpa_supplicant freertos)
 
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 project(circuitpython)

ports/esp32s2/Makefile

@@ -73,30 +73,37 @@ INC += -I./peripherals
 INC += -I../../lib/mp-readline
 INC += -I../../lib/tinyusb/src
 INC += -I../../supervisor/shared/usb
-INC += -Iesp-idf/components/freertos/include/freertos
+
-INC += -Iesp-idf/components/freertos/xtensa/include
+INC += -isystem esp-idf
-INC += -Iesp-idf/components/esp32s2/include
+INC += -isystem esp-idf/components/driver/include
-INC += -Iesp-idf/components/xtensa/esp32s2/include
+INC += -isystem esp-idf/components/freertos/include/freertos
-INC += -Iesp-idf/components/esp_common/include
+INC += -isystem esp-idf/components/freertos/xtensa/include
-INC += -Iesp-idf/components/esp_event/include
+INC += -isystem esp-idf/components/esp32s2/include
-INC += -Iesp-idf/components/esp_netif/include
+INC += -isystem esp-idf/components/xtensa/esp32s2/include
-INC += -Iesp-idf/components/esp_ringbuf/include
+INC += -isystem esp-idf/components/esp_common/include
-INC += -Iesp-idf/components/esp_rom/include
+INC += -isystem esp-idf/components/esp_event/include
-INC += -Iesp-idf/components/esp_wifi/include
+INC += -isystem esp-idf/components/esp_netif/include
-INC += -Iesp-idf/components/xtensa/include
+INC += -isystem esp-idf/components/esp_ringbuf/include
-INC += -Iesp-idf/components/esp_timer/include
+INC += -isystem esp-idf/components/esp_rom/include
-INC += -Iesp-idf/components/mbedtls/mbedtls/include
+INC += -isystem esp-idf/components/esp_wifi/include
-INC += -Iesp-idf/components/mbedtls/port/include/
+INC += -isystem esp-idf/components/xtensa/include
-INC += -Iesp-idf/components/newlib/platform_include
+INC += -isystem esp-idf/components/esp_timer/include
-INC += -Iesp-idf/components/lwip/lwip/src/include
+INC += -isystem esp-idf/components/mbedtls/mbedtls/include
-INC += -Iesp-idf/components/lwip/port/esp32/include
+INC += -isystem esp-idf/components/mbedtls/port/include/
-INC += -Iesp-idf/components/lwip/include/apps/sntp
+INC += -isystem esp-idf/components/newlib/platform_include
-INC += -Iesp-idf/components/soc/include
+INC += -isystem esp-idf/components/lwip/lwip/src/include
-INC += -Iesp-idf/components/soc/src/esp32s2/include
+INC += -isystem esp-idf/components/lwip/port/esp32/include
-INC += -Iesp-idf/components/soc/soc/include
+INC += -isystem esp-idf/components/lwip/include/apps/sntp
-INC += -Iesp-idf/components/soc/soc/esp32s2/include
+INC += -isystem esp-idf/components/hal/include
-INC += -Iesp-idf/components/heap/include
+INC += -isystem esp-idf/components/hal/esp32s2/include
-INC += -Iesp-idf/components/esp_system/include
+INC += -isystem esp-idf/components/log/include/
+INC += -isystem esp-idf/components/driver/esp32s2/include
+INC += -isystem esp-idf/components/soc/include
+INC += -isystem esp-idf/components/soc/src/esp32s2/include
+INC += -isystem esp-idf/components/soc/soc/include
+INC += -isystem esp-idf/components/soc/soc/esp32s2/include
+INC += -isystem esp-idf/components/heap/include
+INC += -isystem esp-idf/components/esp_system/include
 INC += -I$(BUILD)/esp-idf/config
 
 CFLAGS += -DHAVE_CONFIG_H \
@@ -262,14 +269,13 @@ menuconfig: $(BUILD)/esp-idf/config
 	$(Q)grep -Fvxf $(DEBUG_SDKCONFIG) -f $(FLASH_SDKCONFIG) $(BUILD)/sdkconfig.diff > boards/$(BOARD)/sdkconfig
 
 # qstr builds include headers so we need to make sure they are up to date
-$(HEADER_BUILD)/qstr.i.last: | $(BUILD)/esp-idf/config/sdkconfig.h
+$(HEADER_BUILD)/qstr.split: | $(BUILD)/esp-idf/config/sdkconfig.h
 
-# Order here matters
+ESP_IDF_COMPONENTS_LINK = freertos log hal esp_system esp_adc_cal esp32s2 bootloader_support pthread esp_timer vfs spi_flash app_update esp_common esp32s2 heap newlib driver xtensa soc esp_ringbuf esp_wifi esp_event wpa_supplicant mbedtls efuse nvs_flash esp_netif lwip esp_rom esp-tls
-ESP_IDF_COMPONENTS_LINK = freertos log esp_system esp32s2 bootloader_support pthread esp_timer vfs spi_flash app_update esp_common esp32s2 heap newlib driver xtensa soc esp_ringbuf esp_wifi esp_event wpa_supplicant mbedtls efuse nvs_flash esp_netif lwip esp_rom esp-tls
 
 ESP_IDF_COMPONENTS_INCLUDE = driver freertos log soc
 
-INC += $(foreach component, $(ESP_IDF_COMPONENTS_INCLUDE), -Iesp-idf/components/$(component)/include)
+INC += $(foreach component, $(ESP_IDF_COMPONENTS_INCLUDE), -isystem esp-idf/components/$(component)/include)
 
 ESP_IDF_COMPONENTS_EXPANDED = $(foreach component, $(ESP_IDF_COMPONENTS_LINK), $(BUILD)/esp-idf/esp-idf/$(component)/lib$(component).a)
 ESP_IDF_WIFI_COMPONENTS_EXPANDED = $(foreach component, $(ESP_IDF_WIFI_COMPONENTS_LINK), $(BUILD)/esp-idf/esp-idf/$(component)/lib$(component).a)
@@ -277,11 +283,11 @@ ESP_IDF_WIFI_COMPONENTS_EXPANDED = $(foreach component, $(ESP_IDF_WIFI_COMPONENT
 MBEDTLS_COMPONENTS_LINK = crypto tls x509
 MBEDTLS_COMPONENTS_LINK_EXPANDED = $(foreach component, $(MBEDTLS_COMPONENTS_LINK), $(BUILD)/esp-idf/esp-idf/mbedtls/mbedtls/library/libmbed$(component).a)
 
-BINARY_BLOBS = esp-idf/components/xtensa/esp32s2/libhal.a
+BINARY_BLOBS = esp-idf/components/xtensa/esp32s2/libxt_hal.a
 BINARY_WIFI_BLOBS = libcoexist.a libcore.a libespnow.a libmesh.a libnet80211.a libpp.a librtc.a libsmartconfig.a libphy.a
 BINARY_BLOBS += $(addprefix esp-idf/components/esp_wifi/lib/esp32s2/, $(BINARY_WIFI_BLOBS))
 
-ESP_IDF_COMPONENTS_EXPANDED += $(BUILD)/esp-idf/esp-idf/soc/soc/esp32s2/libsoc_esp32s2.a esp-idf/components/xtensa/esp32s2/libhal.a
+ESP_IDF_COMPONENTS_EXPANDED += $(BUILD)/esp-idf/esp-idf/soc/soc/esp32s2/libsoc_esp32s2.a esp-idf/components/xtensa/esp32s2/libxt_hal.a
 ESP_AUTOGEN_LD = $(BUILD)/esp-idf/esp-idf/esp32s2/esp32s2_out.ld $(BUILD)/esp-idf/esp-idf/esp32s2/ld/esp32s2.project.ld
 
 FLASH_FLAGS = --flash_mode $(CIRCUITPY_ESP_FLASH_MODE) --flash_freq $(CIRCUITPY_ESP_FLASH_FREQ) --flash_size $(CIRCUITPY_ESP_FLASH_SIZE)

ports/esp32s2/bindings/espidf/__init__.c

@@ -29,7 +29,7 @@
 
 #include "bindings/espidf/__init__.h"
 
-#include "esp-idf/components/heap/include/esp_heap_caps.h"
+#include "components/heap/include/esp_heap_caps.h"
 
 //| """Direct access to a few ESP-IDF details. This module *should not* include any functionality
 //|    that could be implemented by other frameworks. It should only include ESP-IDF specific

ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h

@@ -35,5 +35,5 @@
 
 #define AUTORESET_DELAY_MS 500
 
-#define MICROPY_HW_APA102_MOSI   (&pin_GPIO40)
+// #define MICROPY_HW_APA102_MOSI   (&pin_GPIO40)
-#define MICROPY_HW_APA102_SCK    (&pin_GPIO45)
+// #define MICROPY_HW_APA102_SCK    (&pin_GPIO45)

ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h

@@ -26,7 +26,7 @@
 
 //Micropython setup
 
-#define MICROPY_HW_BOARD_NAME       "FeatherS2"
+#define MICROPY_HW_BOARD_NAME       "FeatherS2 PreRelease"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
@@ -34,5 +34,5 @@
 
 #define AUTORESET_DELAY_MS 500
 
-#define MICROPY_HW_APA102_MOSI   (&pin_GPIO40)
+// #define MICROPY_HW_APA102_MOSI   (&pin_GPIO40)
-#define MICROPY_HW_APA102_SCK    (&pin_GPIO45)
+// #define MICROPY_HW_APA102_SCK    (&pin_GPIO45)

ports/esp32s2/common-hal/analogio/AnalogIn.c

@@ -0,0 +1,98 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Lucian Copeland for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "common-hal/analogio/AnalogIn.h"
+#include "py/mperrno.h"
+#include "py/runtime.h"
+#include "supervisor/shared/translate.h"
+
+#include "components/driver/include/driver/adc_common.h"
+#include "components/esp_adc_cal/include/esp_adc_cal.h"
+
+#include "shared-bindings/microcontroller/Pin.h"
+
+#define DEFAULT_VREF        1100
+#define NO_OF_SAMPLES       64
+#define ATTENUATION         ADC_ATTEN_DB_11
+#define DATA_WIDTH          ADC_WIDTH_BIT_13
+
+void common_hal_analogio_analogin_construct(analogio_analogin_obj_t* self,
+        const mcu_pin_obj_t *pin) {
+    if (pin->adc_index == 0 || pin->adc_channel == ADC_CHANNEL_MAX) {
+        mp_raise_ValueError(translate("Pin does not have ADC capabilities"));
+    }
+    common_hal_mcu_pin_claim(pin);
+    self->pin = pin;
+}
+
+bool common_hal_analogio_analogin_deinited(analogio_analogin_obj_t *self) {
+    return self->pin == NULL;
+}
+
+void common_hal_analogio_analogin_deinit(analogio_analogin_obj_t *self) {
+    if (common_hal_analogio_analogin_deinited(self)) {
+        return;
+    }
+    reset_pin_number(self->pin->number);
+    self->pin = NULL;
+}
+
+uint16_t common_hal_analogio_analogin_get_value(analogio_analogin_obj_t *self) {
+    if (self->pin->adc_index == ADC_UNIT_1) {
+        adc1_config_width(DATA_WIDTH);
+        adc1_config_channel_atten((adc1_channel_t)self->pin->adc_channel, ATTENUATION);
+    } else if (self->pin->adc_index == ADC_UNIT_2) {
+        adc2_config_channel_atten((adc2_channel_t)self->pin->adc_channel, ATTENUATION);
+    }
+
+    // Automatically select calibration process depending on status of efuse
+    esp_adc_cal_characteristics_t *adc_chars = calloc(1, sizeof(esp_adc_cal_characteristics_t));
+    esp_adc_cal_characterize(self->pin->adc_index, ATTENUATION, DATA_WIDTH, DEFAULT_VREF, adc_chars);
+
+    uint32_t adc_reading = 0;
+    //Multisampling
+    for (int i = 0; i < NO_OF_SAMPLES; i++) {
+        if (self->pin->adc_index == ADC_UNIT_1) {
+            adc_reading += adc1_get_raw((adc1_channel_t)self->pin->adc_channel);
+        } else {
+            int raw;
+            esp_err_t r = adc2_get_raw((adc2_channel_t)self->pin->adc_channel, DATA_WIDTH, &raw);
+            if ( r != ESP_OK ) {
+                mp_raise_ValueError(translate("ADC2 is being used by WiFi"));
+            }
+            adc_reading += raw;
+        }
+    }
+    adc_reading /= NO_OF_SAMPLES;
+
+    // This corrects non-linear regions of the ADC range with a LUT, so it's a better reading than raw
+    uint32_t voltage = esp_adc_cal_raw_to_voltage(adc_reading, adc_chars);
+    return voltage * ((1 << 16) - 1)/3300;
+}
+
+float common_hal_analogio_analogin_get_reference_voltage(analogio_analogin_obj_t *self) {
+    return 3.3f;
+}

ports/esp32s2/common-hal/analogio/AnalogIn.h

@@ -0,0 +1,42 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Lucian Copeland for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ANALOGIO_ANALOGIN_H
+#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ANALOGIO_ANALOGIN_H
+
+#include "common-hal/microcontroller/Pin.h"
+
+#include "components/hal/include/hal/adc_types.h"
+#include "FreeRTOS.h"
+#include "freertos/semphr.h"
+#include "py/obj.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    const mcu_pin_obj_t * pin;
+} analogio_analogin_obj_t;
+
+#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ANALOGIO_ANALOGIN_H

ports/esp32s2/common-hal/analogio/AnalogOut.c

@@ -0,0 +1,73 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * SPDX-FileCopyrightText: Copyright (c) 2013, 2014 Damien P. George
+ * Copyright (c) 2019, Lucian Copeland for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include "py/mperrno.h"
+#include "py/runtime.h"
+
+#include "shared-bindings/analogio/AnalogOut.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "supervisor/shared/translate.h"
+
+#include "components/driver/include/driver/dac_common.h"
+
+#include "common-hal/microcontroller/Pin.h"
+
+void common_hal_analogio_analogout_construct(analogio_analogout_obj_t* self,
+        const mcu_pin_obj_t *pin) {
+    if (pin == &pin_GPIO17) {
+        self->channel = DAC_CHANNEL_1;
+    } else if (pin == &pin_GPIO18) {
+        self->channel = DAC_CHANNEL_2;
+    } else {
+        mp_raise_ValueError(translate("Invalid DAC pin supplied"));
+    }
+    dac_output_enable(self->channel);
+}
+
+bool common_hal_analogio_analogout_deinited(analogio_analogout_obj_t *self) {
+    return (self->channel == DAC_CHANNEL_MAX);
+}
+
+void common_hal_analogio_analogout_deinit(analogio_analogout_obj_t *self) {
+    dac_output_disable(self->channel);
+    self->channel = DAC_CHANNEL_MAX;
+}
+
+void common_hal_analogio_analogout_set_value(analogio_analogout_obj_t *self,
+        uint16_t value) {
+    uint8_t dac_value = (value * 255) / 65535;
+    dac_output_enable(self->channel);
+    dac_output_voltage(self->channel, dac_value);
+}
+
+void analogout_reset(void) {
+    dac_output_disable(DAC_CHANNEL_1);
+    dac_output_disable(DAC_CHANNEL_2);
+}

ports/esp32s2/common-hal/analogio/AnalogOut.h

@@ -0,0 +1,43 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2016 Scott Shawcroft
+ * Copyright (c) 2019 Lucian Copeland for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ANALOGIO_ANALOGOUT_H
+#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ANALOGIO_ANALOGOUT_H
+
+#include "common-hal/microcontroller/Pin.h"
+
+#include "py/obj.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    const mcu_pin_obj_t * pin;
+    uint8_t channel;
+} analogio_analogout_obj_t;
+
+void analogout_reset(void);
+
+#endif // MICROPY_INCLUDED_STM32F4_COMMON_HAL_ANALOGIO_ANALOGOUT_H

ports/esp32s2/common-hal/analogio/__init__.c

@@ -0,0 +1 @@
+// No analogio module functions.

ports/esp32s2/common-hal/busio/I2C.c

@@ -28,7 +28,7 @@
 #include "py/mperrno.h"
 #include "py/runtime.h"
 
-#include "driver/i2c.h"
+#include "components/driver/include/driver/i2c.h"
 
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"

ports/esp32s2/common-hal/busio/I2C.h

@@ -29,7 +29,7 @@
 
 #include "common-hal/microcontroller/Pin.h"
 
-#include "esp-idf/components/soc/include/hal/i2c_types.h"
+#include "components/hal/include/hal/i2c_types.h"
 #include "FreeRTOS.h"
 #include "freertos/semphr.h"
 #include "py/obj.h"

ports/esp32s2/common-hal/busio/SPI.c

@@ -266,7 +266,7 @@ bool common_hal_busio_spi_configure(busio_spi_obj_t *self,
     self->bits = bits;
     self->target_frequency = baudrate;
     self->hal_context.timing_conf = &self->timing_conf;
-    esp_err_t result =  spi_hal_get_clock_conf(&self->hal_context,
+    esp_err_t result =  spi_hal_cal_clock_conf(&self->hal_context,
                                                self->target_frequency,
                                                128 /* duty_cycle */,
                                                self->connected_through_gpio,

ports/esp32s2/common-hal/busio/SPI.h

@@ -29,9 +29,9 @@
 
 #include "common-hal/microcontroller/Pin.h"
 
-#include "esp-idf/components/driver/include/driver/spi_common_internal.h"
+#include "components/driver/include/driver/spi_common_internal.h"
-#include "esp-idf/components/soc/include/hal/spi_hal.h"
+#include "components/hal/include/hal/spi_hal.h"
-#include "esp-idf/components/soc/include/hal/spi_types.h"
+#include "components/hal/include/hal/spi_types.h"
 #include "py/obj.h"
 
 typedef struct {

ports/esp32s2/common-hal/busio/UART.c

@@ -27,7 +27,7 @@
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/busio/UART.h"
 
-#include "driver/uart.h"
+#include "components/driver/include/driver/uart.h"
 
 #include "mpconfigport.h"
 #include "lib/utils/interrupt_char.h"

ports/esp32s2/common-hal/busio/UART.h

@@ -29,7 +29,7 @@
 
 #include "common-hal/microcontroller/Pin.h"
 
-#include "esp-idf/components/soc/include/hal/uart_types.h"
+#include "components/hal/include/hal/uart_types.h"
 #include "py/obj.h"
 
 typedef struct {

ports/esp32s2/common-hal/digitalio/DigitalInOut.c

@@ -28,9 +28,9 @@
 #include "py/runtime.h"
 #include "supervisor/shared/translate.h"
 
-#include "driver/gpio.h"
+#include "components/driver/include/driver/gpio.h"
 
-#include "esp-idf/components/soc/include/hal/gpio_hal.h"
+#include "components/hal/include/hal/gpio_hal.h"
 
 void common_hal_digitalio_digitalinout_never_reset(
         digitalio_digitalinout_obj_t *self) {

ports/esp32s2/common-hal/microcontroller/Pin.c

@@ -31,8 +31,8 @@
 
 #include "py/mphal.h"
 
-#include "esp-idf/components/driver/include/driver/gpio.h"
+#include "components/driver/include/driver/gpio.h"
-#include "esp-idf/components/soc/include/hal/gpio_hal.h"
+#include "components/hal/include/hal/gpio_hal.h"
 
 #ifdef MICROPY_HW_NEOPIXEL
 bool neopixel_in_use;

ports/esp32s2/common-hal/microcontroller/Processor.c

@@ -34,7 +34,7 @@
 
 #include "soc/efuse_reg.h"
 
-#include "esp-idf/components/driver/esp32s2/include/driver/temp_sensor.h"
+#include "components/driver/esp32s2/include/driver/temp_sensor.h"
 
 float common_hal_mcu_processor_get_temperature(void) {
     float tsens_out;

ports/esp32s2/common-hal/neopixel_write/__init__.c

@@ -43,8 +43,8 @@
 #include "py/mphal.h"
 #include "py/runtime.h"
 #include "shared-bindings/neopixel_write/__init__.h"
-#include "driver/rmt.h"
+#include "components/driver/include/driver/rmt.h"
-#include "rmt.h"
+#include "peripherals/rmt.h"
 
 #define WS2812_T0H_NS (350)
 #define WS2812_T0L_NS (1000)

ports/esp32s2/common-hal/pulseio/PulseIn.h

@@ -30,8 +30,8 @@
 #include "common-hal/microcontroller/Pin.h"
 
 #include "py/obj.h"
-#include "driver/rmt.h"
+#include "components/driver/include/driver/rmt.h"
-#include "rmt.h"
+#include "peripherals/rmt.h"
 
 typedef struct {
     mp_obj_base_t base;

ports/esp32s2/common-hal/pulseio/PulseOut.h

@@ -28,8 +28,8 @@
 #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PULSEIO_PULSEOUT_H
 
 #include "common-hal/microcontroller/Pin.h"
-#include "driver/rmt.h"
+#include "components/driver/include/driver/rmt.h"
-#include "rmt.h"
+#include "peripherals/rmt.h"
 
 #include "py/obj.h"
 

ports/esp32s2/common-hal/pwmio/PWMOut.c

@@ -28,7 +28,7 @@
 #include "common-hal/pwmio/PWMOut.h"
 #include "shared-bindings/pwmio/PWMOut.h"
 #include "py/runtime.h"
-#include "driver/ledc.h"
+#include "components/driver/include/driver/ledc.h"
 
 #define INDEX_EMPTY 0xFF
 

ports/esp32s2/common-hal/pwmio/PWMOut.h

@@ -28,7 +28,7 @@
 #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PWMIO_PWMOUT_H
 
 #include "common-hal/microcontroller/Pin.h"
-#include "driver/ledc.h"
+#include "components/driver/include/driver/ledc.h"
 
 typedef struct {
     mp_obj_base_t base;

ports/esp32s2/common-hal/rtc/RTC.c

@@ -28,7 +28,7 @@
 
 #include "py/obj.h"
 #include "py/runtime.h"
-#include "soc/rtc_periph.h"
+#include "components/soc/soc/include/soc/rtc_periph.h"
 #include "shared-bindings/rtc/RTC.h"
 
 void common_hal_rtc_get_time(timeutils_struct_time_t *tm) {

ports/esp32s2/common-hal/socketpool/Socket.h

@@ -32,7 +32,7 @@
 #include "common-hal/socketpool/SocketPool.h"
 #include "common-hal/ssl/SSLContext.h"
 
-#include "esp-idf/components/esp-tls/esp_tls.h"
+#include "components/esp-tls/esp_tls.h"
 
 typedef struct {
     mp_obj_base_t base;

ports/esp32s2/common-hal/socketpool/SocketPool.c

@@ -29,7 +29,7 @@
 #include "py/runtime.h"
 #include "shared-bindings/wifi/__init__.h"
 
-#include "esp-idf/components/lwip/lwip/src/include/lwip/netdb.h"
+#include "components/lwip/lwip/src/include/lwip/netdb.h"
 
 #include "bindings/espidf/__init__.h"
 

ports/esp32s2/common-hal/ssl/SSLContext.h

@@ -29,7 +29,7 @@
 
 #include "py/obj.h"
 
-#include "esp-idf/components/esp-tls/esp_tls.h"
+#include "components/esp-tls/esp_tls.h"
 
 typedef struct {
     mp_obj_base_t base;

ports/esp32s2/common-hal/ssl/__init__.c

@@ -26,7 +26,7 @@
 
 #include "shared-bindings/ssl/SSLContext.h"
 
-#include "esp-idf/components/mbedtls/esp_crt_bundle/include/esp_crt_bundle.h"
+#include "components/mbedtls/esp_crt_bundle/include/esp_crt_bundle.h"
 
 void common_hal_ssl_create_default_context(ssl_sslcontext_obj_t* self) {
     memset(&self->ssl_config, 0, sizeof(esp_tls_cfg_t));

ports/esp32s2/common-hal/wifi/Network.h

@@ -29,7 +29,7 @@
 
 #include "py/obj.h"
 
-#include "esp-idf/components/esp_wifi/include/esp_wifi_types.h"
+#include "components/esp_wifi/include/esp_wifi_types.h"
 
 typedef struct {
     mp_obj_base_t base;

ports/esp32s2/common-hal/wifi/Radio.c

@@ -35,8 +35,8 @@
 #include "shared-bindings/wifi/ScannedNetworks.h"
 #include "shared-module/ipaddress/__init__.h"
 
-#include "esp-idf/components/esp_wifi/include/esp_wifi.h"
+#include "components/esp_wifi/include/esp_wifi.h"
-#include "esp-idf/components/lwip/include/apps/ping/ping_sock.h"
+#include "components/lwip/include/apps/ping/ping_sock.h"
 
 static void start_station(wifi_radio_obj_t *self) {
     if (self->sta_mode) {

ports/esp32s2/common-hal/wifi/Radio.h

@@ -29,7 +29,7 @@
 
 #include "py/obj.h"
 
-#include "esp-idf/components/esp_event/include/esp_event.h"
+#include "components/esp_event/include/esp_event.h"
 
 #include "shared-bindings/wifi/ScannedNetworks.h"
 

ports/esp32s2/common-hal/wifi/ScannedNetworks.c

@@ -37,7 +37,7 @@
 #include "shared-bindings/wifi/Radio.h"
 #include "shared-bindings/wifi/ScannedNetworks.h"
 
-#include "esp-idf/components/esp_wifi/include/esp_wifi.h"
+#include "components/esp_wifi/include/esp_wifi.h"
 
 static void wifi_scannednetworks_done(wifi_scannednetworks_obj_t *self) {
     self->done = true;

ports/esp32s2/common-hal/wifi/ScannedNetworks.h

@@ -35,7 +35,7 @@
 #include "FreeRTOS.h"
 #include "freertos/event_groups.h"
 
-#include "esp-idf/components/esp_wifi/include/esp_wifi_types.h"
+#include "components/esp_wifi/include/esp_wifi_types.h"
 
 typedef struct {
     mp_obj_base_t base;

ports/esp32s2/common-hal/wifi/__init__.c

@@ -31,13 +31,14 @@
 
 #include "py/runtime.h"
 
-#include "esp-idf/components/esp_wifi/include/esp_wifi.h"
+#include "components/esp_wifi/include/esp_wifi.h"
 
-#include "esp-idf/components/heap/include/esp_heap_caps.h"
+#include "components/heap/include/esp_heap_caps.h"
 
 wifi_radio_obj_t common_hal_wifi_radio_obj;
 
-#include "esp_log.h"
+#include "components/log/include/esp_log.h"
+
 static const char* TAG = "wifi";
 
 static void event_handler(void* arg, esp_event_base_t event_base,

ports/esp32s2/esp-idf

@@ -1 +1 @@
-Subproject commit de733cdab556c5713c94ba95078f4024dd56fd87
+Subproject commit 8bc19ba893e5544d571a753d82b44a84799b94b1

ports/esp32s2/mpconfigport.h

@@ -31,8 +31,8 @@
 #define CIRCUITPY_INTERNAL_NVM_SIZE         (0)
 #define MICROPY_NLR_THUMB                   (0)
 
-#define MICROPY_PY_UJSON                 (1)
+#define MICROPY_PY_UJSON                    (1)
-#define MICROPY_USE_INTERNAL_PRINTF      (0)
+#define MICROPY_USE_INTERNAL_PRINTF         (0)
 
 #include "py/circuitpy_mpconfig.h"
 

ports/esp32s2/mpconfigport.mk

@@ -14,7 +14,6 @@ LONGINT_IMPL = MPZ
 
 # These modules are implemented in ports/<port>/common-hal:
 CIRCUITPY_FULL_BUILD = 1
-CIRCUITPY_ANALOGIO = 0
 CIRCUITPY_AUDIOBUSIO = 0
 CIRCUITPY_AUDIOIO = 0
 CIRCUITPY_COUNTIO = 0

ports/esp32s2/mphalport.c

@@ -31,8 +31,8 @@
 #include "py/mpstate.h"
 #include "py/gc.h"
 
-#include "esp-idf/components/xtensa/include/esp_debug_helpers.h"
+#include "components/xtensa/include/esp_debug_helpers.h"
-#include "esp-idf/components/esp_rom/include/esp32s2/rom/ets_sys.h"
+#include "components/esp_rom/include/esp32s2/rom/ets_sys.h"
 
 void mp_hal_delay_us(mp_uint_t delay) {
     ets_delay_us(delay);

ports/esp32s2/peripherals/pins.c

@@ -26,56 +26,58 @@
 
 #include "peripherals/pins.h"
 
-#define NO_ADC 0xff
+#define NO_ADC 0
+#define NO_ADC_CHANNEL ADC_CHANNEL_MAX
 
 // This macro is used to simplify pin definition in boards/<board>/pins.c
-#define PIN(p_name, p_number) \
+#define PIN(p_name, p_number, p_adc_index, p_adc_channel) \
 const mcu_pin_obj_t pin_## p_name = { \
     PIN_PREFIX_VALUES \
     .number = p_number, \
+    .adc_index = p_adc_index, \
+    .adc_channel = p_adc_channel, \
 }
 
-PIN(GPIO0, 0);
+PIN(GPIO0, 0, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO1, 1);
+PIN(GPIO1, 1, ADC_UNIT_1, ADC_CHANNEL_0);
-PIN(GPIO2, 2);
+PIN(GPIO2, 2, ADC_UNIT_1, ADC_CHANNEL_1);
-PIN(GPIO3, 3);
+PIN(GPIO3, 3, ADC_UNIT_1, ADC_CHANNEL_2);
-PIN(GPIO4, 4);
+PIN(GPIO4, 4, ADC_UNIT_1, ADC_CHANNEL_3);
-PIN(GPIO5, 5);
+PIN(GPIO5, 5, ADC_UNIT_1, ADC_CHANNEL_4);
-PIN(GPIO6, 6);
+PIN(GPIO6, 6, ADC_UNIT_1, ADC_CHANNEL_5);
-PIN(GPIO7, 7);
+PIN(GPIO7, 7, ADC_UNIT_1, ADC_CHANNEL_6);
-PIN(GPIO8, 8);
+PIN(GPIO8, 8, ADC_UNIT_1, ADC_CHANNEL_7);
-PIN(GPIO9, 9);
+PIN(GPIO9, 9, ADC_UNIT_1, ADC_CHANNEL_8);
-PIN(GPIO10, 10);
+PIN(GPIO10, 10, ADC_UNIT_1, ADC_CHANNEL_9);
-PIN(GPIO11, 11);
+PIN(GPIO11, 11, ADC_UNIT_2, ADC_CHANNEL_0);
-PIN(GPIO12, 12);
+PIN(GPIO12, 12, ADC_UNIT_2, ADC_CHANNEL_1);
-PIN(GPIO13, 13);
+PIN(GPIO13, 13, ADC_UNIT_2, ADC_CHANNEL_2);
-PIN(GPIO14, 14);
+PIN(GPIO14, 14, ADC_UNIT_2, ADC_CHANNEL_3);
-PIN(GPIO15, 15);
+PIN(GPIO15, 15, ADC_UNIT_2, ADC_CHANNEL_4);
-PIN(GPIO16, 16);
+PIN(GPIO16, 16, ADC_UNIT_2, ADC_CHANNEL_5);
-PIN(GPIO17, 17);
+PIN(GPIO17, 17, ADC_UNIT_2, ADC_CHANNEL_6);
-PIN(GPIO18, 18);
+PIN(GPIO18, 18, ADC_UNIT_2, ADC_CHANNEL_7);
-
+PIN(GPIO19, 19, ADC_UNIT_2, ADC_CHANNEL_8);
-PIN(GPIO19, 19);
+PIN(GPIO20, 20, ADC_UNIT_2, ADC_CHANNEL_9);
-PIN(GPIO20, 20);
+PIN(GPIO21, 21, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO21, 21);
+PIN(GPIO26, 26, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO26, 26);
+PIN(GPIO27, 27, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO27, 27);
+PIN(GPIO28, 28, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO28, 28);
+PIN(GPIO29, 29, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO29, 29);
+PIN(GPIO30, 30, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO30, 30);
+PIN(GPIO31, 31, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO31, 31);
+PIN(GPIO32, 32, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO32, 32);
+PIN(GPIO33, 33, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO33, 33);
+PIN(GPIO34, 34, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO34, 34);
+PIN(GPIO35, 35, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO35, 35);
+PIN(GPIO36, 36, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO36, 36);
+PIN(GPIO37, 37, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO37, 37);
+PIN(GPIO38, 38, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO38, 38);
+PIN(GPIO39, 39, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO39, 39);
+PIN(GPIO40, 40, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO40, 40);
+PIN(GPIO41, 41, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO41, 41);
+PIN(GPIO42, 42, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO42, 42);
+PIN(GPIO43, 43, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO43, 43);
+PIN(GPIO44, 44, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO44, 44);
+PIN(GPIO45, 45, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO45, 45);
+PIN(GPIO46, 46, NO_ADC, NO_ADC_CHANNEL);
-PIN(GPIO46, 46);

ports/esp32s2/peripherals/pins.h

@@ -34,11 +34,15 @@
 
 #include "esp32s2_peripherals_config.h"
 #include "esp-idf/config/sdkconfig.h"
-#include "esp-idf/components/soc/include/hal/gpio_types.h"
+
+#include "components/hal/include/hal/gpio_types.h"
+#include "components/hal/include/hal/adc_types.h"
 
 typedef struct {
     PIN_PREFIX_FIELDS
     gpio_num_t number;
+    uint8_t adc_index:2;
+    uint8_t adc_channel:6;
 } mcu_pin_obj_t;
 
 extern const mcu_pin_obj_t pin_GPIO0;

ports/esp32s2/peripherals/rmt.c

@@ -24,7 +24,7 @@
  * THE SOFTWARE.
  */
 
-#include "rmt.h"
+#include "peripherals/rmt.h"
 #include "py/runtime.h"
 
 bool rmt_reserved_channels[RMT_CHANNEL_MAX];

ports/esp32s2/peripherals/rmt.h

@@ -28,7 +28,7 @@
 #define MICROPY_INCLUDED_ESP32S2_PERIPHERALS_RMT_H
 
 #include "py/mphal.h"
-#include "driver/rmt.h"
+#include "components/driver/include/driver/rmt.h"
 #include <stdint.h>
 
 void esp32s2_peripherals_rmt_reset(void);

ports/esp32s2/supervisor/internal_flash.c

@@ -37,7 +37,7 @@
 #include "py/runtime.h"
 #include "lib/oofatfs/ff.h"
 
-#include "esp-idf/components/spi_flash/include/esp_partition.h"
+#include "components/spi_flash/include/esp_partition.h"
 
 #include "supervisor/usb.h"
 

ports/esp32s2/supervisor/port.c

@@ -35,6 +35,7 @@
 #include "freertos/task.h"
 
 #include "common-hal/microcontroller/Pin.h"
+#include "common-hal/analogio/AnalogOut.h"
 #include "common-hal/busio/I2C.h"
 #include "common-hal/busio/SPI.h"
 #include "common-hal/busio/UART.h"
@@ -46,8 +47,8 @@
 #include "shared-bindings/rtc/__init__.h"
 
 #include "peripherals/rmt.h"
-#include "esp-idf/components/heap/include/esp_heap_caps.h"
+#include "components/heap/include/esp_heap_caps.h"
-#include "esp-idf/components/soc/soc/esp32s2/include/soc/cache_memory.h"
+#include "components/soc/soc/esp32s2/include/soc/cache_memory.h"
 
 #define HEAP_SIZE (48 * 1024)
 
@@ -95,6 +96,10 @@ void reset_port(void) {
     // A larger delay so the idle task can run and do any IDF cleanup needed.
     vTaskDelay(4);
 
+#if CIRCUITPY_ANALOGIO
+    analogout_reset();
+#endif
+
 #if CIRCUITPY_PULSEIO
     esp32s2_peripherals_rmt_reset();
     pulsein_reset();

ports/esp32s2/supervisor/usb.c

@@ -29,10 +29,12 @@
 #include "lib/utils/interrupt_char.h"
 #include "lib/mp-readline/readline.h"
 
-#include "esp-idf/components/soc/soc/esp32s2/include/soc/usb_periph.h"
+#include "components/soc/soc/esp32s2/include/soc/usb_periph.h"
-#include "esp-idf/components/driver/include/driver/periph_ctrl.h"
+#include "components/driver/include/driver/periph_ctrl.h"
-#include "esp-idf/components/driver/include/driver/gpio.h"
+#include "components/driver/include/driver/gpio.h"
-#include "esp-idf/components/esp_rom/include/esp32s2/rom/gpio.h"
+#include "components/esp_rom/include/esp32s2/rom/gpio.h"
+#include "components/esp_rom/include/esp_rom_gpio.h"
+#include "components/hal/esp32s2/include/hal/gpio_ll.h"
 
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
@@ -68,6 +70,33 @@ void usb_device_task(void* param)
   }
 }
 
+static void configure_pins (usb_hal_context_t *usb)
+{
+    /* usb_periph_iopins currently configures USB_OTG as USB Device.
+     * Introduce additional parameters in usb_hal_context_t when adding support
+     * for USB Host.
+     */
+    for ( const usb_iopin_dsc_t *iopin = usb_periph_iopins; iopin->pin != -1; ++iopin ) {
+        if ( (usb->use_external_phy) || (iopin->ext_phy_only == 0) ) {
+            esp_rom_gpio_pad_select_gpio(iopin->pin);
+            if ( iopin->is_output ) {
+                esp_rom_gpio_connect_out_signal(iopin->pin, iopin->func, false, false);
+            }
+            else {
+                esp_rom_gpio_connect_in_signal(iopin->pin, iopin->func, false);
+                if ( (iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH) ) {
+                    gpio_ll_input_enable(&GPIO, iopin->pin);
+                }
+            }
+            esp_rom_gpio_pad_unhold(iopin->pin);
+        }
+    }
+    if ( !usb->use_external_phy ) {
+        gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3);
+        gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3);
+    }
+}
+
 void init_usb_hardware(void) {
     periph_module_reset(PERIPH_USB_MODULE);
     periph_module_enable(PERIPH_USB_MODULE);
@@ -75,10 +104,7 @@ void init_usb_hardware(void) {
         .use_external_phy = false // use built-in PHY
     };
     usb_hal_init(&hal);
-
+    configure_pins(&hal);
-    // Initialize the pin drive strength.
-    gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3);
-    gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3);
 
     (void) xTaskCreateStatic(usb_device_task,
                              "usbd",

ports/litex/supervisor/port.c

@@ -128,7 +128,11 @@ uint32_t port_get_saved_word(void) {
 }
 
 uint64_t port_get_raw_ticks(uint8_t* subticks) {
-    return raw_ticks;
+    // Reading 64 bits may take two loads, so turn of interrupts while we do it.
+    irq_setie(false);
+    uint64_t raw_tick_snapshot = raw_ticks;
+    irq_setie(true);
+    return raw_tick_snapshot;
 }
 
 // Enable 1/1024 second tick.

ports/mimxrt10xx/Makefile

@@ -75,7 +75,7 @@ INC += \
 
 # NDEBUG disables assert() statements. This reduces code size pretty dramatically, per tannewt.
 
-CFLAGS += -Os -DNDEBUG
+CFLAGS += -Os -DNDEBUG -ffreestanding
 
 # TinyUSB defines
 CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX -DCFG_TUD_MIDI_RX_BUFSIZE=512 -DCFG_TUD_CDC_RX_BUFSIZE=512 -DCFG_TUD_MIDI_TX_BUFSIZE=512 -DCFG_TUD_CDC_TX_BUFSIZE=512 -DCFG_TUD_MSC_BUFSIZE=1024

ports/mimxrt10xx/boards/board.h

@@ -33,6 +33,7 @@
 
 #include "py/mpconfig.h"
 #include "fsl_common.h"
+#include "fsl_flexspi_nor_config.h"
 
 // Initializes board related state once on start up.
 void board_init(void);
@@ -45,4 +46,11 @@ bool board_requests_safe_mode(void);
 // Reset the state of off MCU components such as neopixels.
 void reset_board(void);
 
+#define SEQUENCE(first, second, third, fourth) first, second, third, fourth
+#define TWO_EMPTY_STEPS 0x00000000
+#define EMPTY_SEQUENCE SEQUENCE(TWO_EMPTY_STEPS, TWO_EMPTY_STEPS, TWO_EMPTY_STEPS, TWO_EMPTY_STEPS)
+
+// FlexSPI configuration that stores command info.
+extern const flexspi_nor_config_t qspiflash_config;
+
 #endif  // MICROPY_INCLUDED_MIMXRT10XX_BOARDS_BOARD_H

ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c

@@ -6,7 +6,7 @@
  */
 
 #include "fsl_flexspi_nor_boot.h"
-#include "fsl_flexspi_nor_config.h"
+#include "boards/board.h"
 
 
 __attribute__((section(".boot_hdr.ivt")))
@@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = {
   0xFFFFFFFF                  /* empty - extra data word */
 };
 
+// Config for W25Q32JV with QSPI routed.
 __attribute__((section(".boot_hdr.conf")))
-// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39
 const flexspi_nor_config_t qspiflash_config = {
-    .memConfig =
-        {
-            .tag              = FLEXSPI_CFG_BLK_TAG,
-            .version          = FLEXSPI_CFG_BLK_VERSION,
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
-            .csHoldTime       = 1u,
-            .csSetupTime      = 2u,
-            // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
-            .deviceType    = kFlexSpiDeviceType_SerialNOR,
-            .sflashPadType = kSerialFlash_4Pads,
-            .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03
-            .sflashA1Size  = FLASH_SIZE,
-            .lookupTable =
-                {
-                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
-                    // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) |
-                    //  FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
-                    // Read LUTs
-                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
-                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
-                    0,
-                    0,
-
-                    0x24040405,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000406,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x08180420,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x081804D8,
-                    0,
-                    0,
-                    0,
-
-                    0x08180402,
-                    0x00002004,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000460,
-                },
-        },
     .pageSize           = 256u,
     .sectorSize         = 4u * 1024u,
     .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
     .blockSize          = 0x00010000,
     .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x02, // Bit pattern for setting Quad Enable.
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_133MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                                             READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    // FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                    //                 RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                    // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                    //                 READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x02),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status -2
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x31  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x01 /* number of bytes to write */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
 };

ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c

@@ -6,7 +6,7 @@
  */
 
 #include "fsl_flexspi_nor_boot.h"
-#include "fsl_flexspi_nor_config.h"
+#include "boards/board.h"
 
 
 __attribute__((section(".boot_hdr.ivt")))
@@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = {
   0xFFFFFFFF                  /* empty - extra data word */
 };
 
+// Config for W25Q64JV with QSPI routed.
 __attribute__((section(".boot_hdr.conf")))
-// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39
 const flexspi_nor_config_t qspiflash_config = {
-    .memConfig =
-        {
-            .tag              = FLEXSPI_CFG_BLK_TAG,
-            .version          = FLEXSPI_CFG_BLK_VERSION,
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
-            .csHoldTime       = 1u,
-            .csSetupTime      = 2u,
-            // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
-            .deviceType    = kFlexSpiDeviceType_SerialNOR,
-            .sflashPadType = kSerialFlash_4Pads,
-            .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03
-            .sflashA1Size  = FLASH_SIZE,
-            .lookupTable =
-                {
-                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
-                    // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) |
-                    //  FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
-                    // Read LUTs
-                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
-                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
-                    0,
-                    0,
-
-                    0x24040405,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000406,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x08180420,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x081804D8,
-                    0,
-                    0,
-                    0,
-
-                    0x08180402,
-                    0x00002004,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000460,
-                },
-        },
     .pageSize           = 256u,
     .sectorSize         = 4u * 1024u,
     .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
     .blockSize          = 0x00010000,
     .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x02,
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_133MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                                             READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    // FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                    //                 RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                    // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                    //                 READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x31  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
 };

ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c

@@ -6,7 +6,7 @@
  */
 
 #include "fsl_flexspi_nor_boot.h"
-#include "fsl_flexspi_nor_config.h"
+#include "boards/board.h"
 
 
 __attribute__((section(".boot_hdr.ivt")))
@@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = {
   0xFFFFFFFF                  /* empty - extra data word */
 };
 
+// Config for W25Q64JV with QSPI routed.
 __attribute__((section(".boot_hdr.conf")))
-// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39
 const flexspi_nor_config_t qspiflash_config = {
-    .memConfig =
-        {
-            .tag              = FLEXSPI_CFG_BLK_TAG,
-            .version          = FLEXSPI_CFG_BLK_VERSION,
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
-            .csHoldTime       = 1u,
-            .csSetupTime      = 2u,
-            // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
-            .deviceType    = kFlexSpiDeviceType_SerialNOR,
-            .sflashPadType = kSerialFlash_4Pads,
-            .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03
-            .sflashA1Size  = FLASH_SIZE,
-            .lookupTable =
-                {
-                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
-                    // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) |
-                    //  FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
-                    // Read LUTs
-                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
-                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
-                    0,
-                    0,
-
-                    0x24040405,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000406,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x08180420,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x081804D8,
-                    0,
-                    0,
-                    0,
-
-                    0x08180402,
-                    0x00002004,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000460,
-                },
-        },
     .pageSize           = 256u,
     .sectorSize         = 4u * 1024u,
     .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
     .blockSize          = 0x00010000,
     .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x02,
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_133MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                                             READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    // FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                    //                 RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                    // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                    //                 READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x31  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
 };

ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c

@@ -6,7 +6,8 @@
  */
 
 #include "fsl_flexspi_nor_boot.h"
-#include "fsl_flexspi_nor_config.h"
+#include "boards/board.h"
+
 
 __attribute__((section(".boot_hdr.ivt")))
 /*************************************
@@ -34,88 +35,135 @@ const BOOT_DATA_T boot_data = {
   0xFFFFFFFF                  /* empty - extra data word */
 };
 
+// Config for AT25SF128A with QSPI routed.
 __attribute__((section(".boot_hdr.conf")))
-// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39
 const flexspi_nor_config_t qspiflash_config = {
-    .memConfig =
-        {
-            .tag              = FLEXSPI_CFG_BLK_TAG,
-            .version          = FLEXSPI_CFG_BLK_VERSION,
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
-            .csHoldTime       = 1u,
-            .csSetupTime      = 2u,
-            // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
-            .deviceType    = kFlexSpiDeviceType_SerialNOR,
-            .sflashPadType = kSerialFlash_4Pads,
-            .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03
-            .sflashA1Size  = FLASH_SIZE,
-            .lookupTable =
-                {
-                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
-                    // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) |
-                    //  FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
-                    // Read LUTs
-                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
-                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
-                    0,
-                    0,
-
-                    0x24040405,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000406,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x08180420,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x081804D8,
-                    0,
-                    0,
-                    0,
-
-                    0x08180402,
-                    0x00002004,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000460,
-                },
-        },
     .pageSize           = 256u,
     .sectorSize         = 4u * 1024u,
     .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
     .blockSize          = 0x00010000,
     .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x02,
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_60MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                                             READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    // FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                    //                 RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                    // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                    //                 READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x02),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x31  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
 };

ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c

@@ -6,7 +6,7 @@
  */
 
 #include "fsl_flexspi_nor_boot.h"
-#include "fsl_flexspi_nor_config.h"
+#include "boards/board.h"
 
 
 __attribute__((section(".boot_hdr.ivt")))
@@ -35,92 +35,135 @@ const BOOT_DATA_T boot_data = {
   0xFFFFFFFF                  /* empty - extra data word */
 };
 
+// Config for IS25LP064A with QSPI routed.
 __attribute__((section(".boot_hdr.conf")))
-// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39
 const flexspi_nor_config_t qspiflash_config = {
-    .memConfig =
-        {
-            .tag              = FLEXSPI_CFG_BLK_TAG,
-            .version          = FLEXSPI_CFG_BLK_VERSION,
-#ifdef BOARD_USING_SECONDARY_QSPI_PINMUX
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromInternally,
-#else
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
-#endif
-            .csHoldTime       = 1u,
-            .csSetupTime      = 2u,
-            // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
-            .deviceType    = kFlexSpiDeviceType_SerialNOR,
-            .sflashPadType = kSerialFlash_4Pads,
-            .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03
-            .sflashA1Size  = FLASH_SIZE,
-            .lookupTable =
-                {
-                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
-                    // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) |
-                    //  FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
-                    // Read LUTs
-                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
-                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
-                    0,
-                    0,
-
-                    0x24040405,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000406,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x08180420,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x081804D8,
-                    0,
-                    0,
-                    0,
-
-                    0x08180402,
-                    0x00002004,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000460,
-                },
-        },
     .pageSize           = 256u,
     .sectorSize         = 4u * 1024u,
     .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
     .blockSize          = 0x00010000,
     .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x40,
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_30MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    // SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                    //                          RADDR_SDR, FLEXSPI_4PAD, 24  bits to transmit ),
+                    //          FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                    //                          READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                                             READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x01  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
 };

ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c

@@ -6,10 +6,10 @@
  */
 
 #include "fsl_flexspi_nor_boot.h"
-#include "fsl_flexspi_nor_config.h"
+#include "boards/board.h"
+
 
 __attribute__((section(".boot_hdr.ivt")))
-
 /*************************************
  *  IVT Data
  *************************************/
@@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = {
   0xFFFFFFFF                  /* empty - extra data word */
 };
 
+// Config for IS25WP064A with QSPI routed.
 __attribute__((section(".boot_hdr.conf")))
-// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39
 const flexspi_nor_config_t qspiflash_config = {
-    .memConfig =
-        {
-            .tag              = FLEXSPI_CFG_BLK_TAG,
-            .version          = FLEXSPI_CFG_BLK_VERSION,
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
-            .csHoldTime       = 1u,
-            .csSetupTime      = 2u,
-            // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
-            .deviceType    = kFlexSpiDeviceType_SerialNOR,
-            .sflashPadType = kSerialFlash_4Pads,
-            .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03
-            .sflashA1Size  = FLASH_SIZE,
-            .lookupTable =
-                {
-                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
-                    // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) |
-                    //  FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
-                    // Read LUTs
-                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
-                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
-                    0,
-                    0,
-
-                    0x24040405,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000406,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x08180420,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x081804D8,
-                    0,
-                    0,
-                    0,
-
-                    0x08180402,
-                    0x00002004,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000460,
-                },
-        },
     .pageSize           = 256u,
     .sectorSize         = 4u * 1024u,
     .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
     .blockSize          = 0x00010000,
     .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x40,
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_60MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                                             READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    // FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                    //                 RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                    // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                    //                 READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x02),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x01  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
 };

ports/mimxrt10xx/boards/metro_m7_1011/board.c

@@ -0,0 +1,52 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ * Copyright (c) 2019 Artur Pacholec
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "boards/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+void board_init(void) {
+    // SWD Pins
+    common_hal_never_reset_pin(&pin_GPIO_AD_13);//SWDIO
+    common_hal_never_reset_pin(&pin_GPIO_AD_12);//SWCLK
+
+    // FLEX flash
+    common_hal_never_reset_pin(&pin_GPIO_SD_12);
+    common_hal_never_reset_pin(&pin_GPIO_SD_11);
+    common_hal_never_reset_pin(&pin_GPIO_SD_10);
+    common_hal_never_reset_pin(&pin_GPIO_SD_09);
+    common_hal_never_reset_pin(&pin_GPIO_SD_08);
+    common_hal_never_reset_pin(&pin_GPIO_SD_07);
+    common_hal_never_reset_pin(&pin_GPIO_SD_06);
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}

ports/mimxrt10xx/boards/metro_m7_1011/flash_config.c

@@ -0,0 +1,179 @@
+/*
+ * Copyright 2017 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "fsl_flexspi_nor_boot.h"
+#include "boards/board.h"
+
+
+__attribute__((section(".boot_hdr.ivt")))
+/*************************************
+ *  IVT Data
+ *************************************/
+const ivt image_vector_table = {
+  IVT_HEADER,                         /* IVT Header */
+  IMAGE_ENTRY_ADDRESS,                /* Image Entry Function */
+  IVT_RSVD,                           /* Reserved = 0 */
+  (uint32_t)DCD_ADDRESS,              /* Address where DCD information is stored */
+  (uint32_t)BOOT_DATA_ADDRESS,        /* Address where BOOT Data Structure is stored */
+  (uint32_t)&image_vector_table,      /* Pointer to IVT Self (absolute address */
+  (uint32_t)CSF_ADDRESS,              /* Address where CSF file is stored */
+  IVT_RSVD                            /* Reserved = 0 */
+};
+
+__attribute__((section(".boot_hdr.boot_data")))
+/*************************************
+ *  Boot Data
+ *************************************/
+const BOOT_DATA_T boot_data = {
+  FLASH_BASE,                 /* boot start location */
+  FLASH_SIZE,                 /* size */
+  PLUGIN_FLAG,                /* Plugin flag*/
+  0xFFFFFFFF                  /* empty - extra data word */
+};
+
+// Config for W25Q16JV with QSPI routed.
+__attribute__((section(".boot_hdr.conf")))
+const flexspi_nor_config_t qspiflash_config = {
+    .pageSize           = 256u,
+    .sectorSize         = 4u * 1024u,
+    .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
+    .blockSize          = 0x00010000,
+    .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x0200,
+            .configCmdEnable = 1u,
+            .configModeType[0] = kDeviceConfigCmdType_Generic,
+            .configCmdSeqs[0] = {
+              .seqId = 2u,
+              .seqNum = 1u,
+            },
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_60MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                                             READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    // FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                    //                 RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                    // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                    //                 READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x02),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x35 /* the command to send */,
+                                             DUMMY_SDR, FLEXSPI_1PAD, 8),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x01  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x02),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
+};

ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.h

@@ -0,0 +1,20 @@
+#define MICROPY_HW_BOARD_NAME "Metro MIMXRT1011"
+#define MICROPY_HW_MCU_NAME "IMXRT1011DAE5A"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO_00)
+
+// If you change this, then make sure to update the linker scripts as well to
+// make sure you don't overwrite code
+#define CIRCUITPY_INTERNAL_NVM_SIZE 0
+
+#define BOARD_FLASH_SIZE (2 * 1024 * 1024)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO_02)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO_01)
+
+#define DEFAULT_SPI_BUS_SCK  (&pin_GPIO_AD_06)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO_AD_04)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO_AD_03)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO_09)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO_10)

ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.mk

@@ -0,0 +1,12 @@
+USB_VID = 0x239A
+USB_PID = 0x80E2
+USB_PRODUCT = "Metro M7 1011"
+USB_MANUFACTURER = "Adafruit"
+
+CHIP_VARIANT = MIMXRT1011DAE5A
+CHIP_FAMILY = MIMXRT1011
+FLASH = W25Q16JV
+
+# Include these Python libraries in the firmware
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_ESP32SPI
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Requests

ports/mimxrt10xx/boards/metro_m7_1011/pins.c

@@ -0,0 +1,59 @@
+#include "shared-bindings/board/__init__.h"
+
+#include "boards/board.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    // Analog
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO_AD_02) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO_AD_01) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO_AD_00) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO_AD_05) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO_AD_10) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO_AD_08) },
+
+    // Digital
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO_09) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO_09) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO_10) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO_10) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO_13) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO_12) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO_SD_00) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO_SD_01) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO_SD_02) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO_11) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO_08) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO_07) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO_06) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO_05) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO_04) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D13),MP_ROM_PTR(&pin_GPIO_03) },
+
+    // ESP control
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_CS), MP_ROM_PTR(&pin_GPIO_AD_14) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_GPIO0), MP_ROM_PTR(&pin_GPIO_SD_05) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_GPIO_AD_11) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_GPIO_AD_07) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_GPIO_09) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_GPIO_10) },
+
+    // SPI
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO_AD_06) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO_AD_03) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO_AD_04) },
+
+    // UART
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO_10) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO_09) },
+
+    // I2C
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO_01) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO_02) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO_00) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

ports/mimxrt10xx/boards/teensy40/flash_config.c

@@ -6,12 +6,8 @@
  */
 
 #include "fsl_flexspi_nor_boot.h"
-#include "fsl_flexspi_nor_config.h"
+#include "boards/board.h"
 
-/* Component ID definition, used by tools. */
-#ifndef FSL_COMPONENT_ID
-#define FSL_COMPONENT_ID "platform.drivers.xip_device"
-#endif
 
 __attribute__((section(".boot_hdr.ivt")))
 /*************************************
@@ -39,88 +35,145 @@ const BOOT_DATA_T boot_data = {
   0xFFFFFFFF                  /* empty - extra data word */
 };
 
+// Config for W25Q16JV with QSPI routed.
 __attribute__((section(".boot_hdr.conf")))
-// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39
 const flexspi_nor_config_t qspiflash_config = {
-    .memConfig =
-        {
-            .tag              = FLEXSPI_CFG_BLK_TAG,
-            .version          = FLEXSPI_CFG_BLK_VERSION,
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
-            .csHoldTime       = 1u,
-            .csSetupTime      = 2u,
-            // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
-            .deviceType    = kFlexSpiDeviceType_SerialNOR,
-            .sflashPadType = kSerialFlash_4Pads,
-            .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03
-            .sflashA1Size  = FLASH_SIZE,
-            .lookupTable =
-                {
-                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
-                    // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) |
-                    //  FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
-                    // Read LUTs
-                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
-                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
-                    0,
-                    0,
-
-                    0x24040405,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000406,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x08180420,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x081804D8,
-                    0,
-                    0,
-                    0,
-
-                    0x08180402,
-                    0x00002004,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000460,
-                },
-        },
     .pageSize           = 256u,
     .sectorSize         = 4u * 1024u,
     .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
     .blockSize          = 0x00010000,
     .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x0200,
+            .configCmdEnable = 1u,
+            .configModeType[0] = kDeviceConfigCmdType_Generic,
+            .configCmdSeqs[0] = {
+              .seqId = 2u,
+              .seqNum = 1u,
+            },
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_60MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                                             READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    // FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                    //                 RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                    // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                    //                 READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x02),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x35 /* the command to send */,
+                                             DUMMY_SDR, FLEXSPI_1PAD, 8),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x01  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x02),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
 };

ports/mimxrt10xx/boards/teensy41/flash_config.c

@@ -6,12 +6,8 @@
  */
 
 #include "fsl_flexspi_nor_boot.h"
-#include "fsl_flexspi_nor_config.h"
+#include "boards/board.h"
 
-/* Component ID definition, used by tools. */
-#ifndef FSL_COMPONENT_ID
-#define FSL_COMPONENT_ID "platform.drivers.xip_device"
-#endif
 
 __attribute__((section(".boot_hdr.ivt")))
 /*************************************
@@ -39,88 +35,135 @@ const BOOT_DATA_T boot_data = {
   0xFFFFFFFF                  /* empty - extra data word */
 };
 
+// Config for W25Q64JV with QSPI routed.
 __attribute__((section(".boot_hdr.conf")))
-// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39
 const flexspi_nor_config_t qspiflash_config = {
-    .memConfig =
-        {
-            .tag              = FLEXSPI_CFG_BLK_TAG,
-            .version          = FLEXSPI_CFG_BLK_VERSION,
-            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
-            .csHoldTime       = 1u,
-            .csSetupTime      = 2u,
-            // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock
-            .deviceType    = kFlexSpiDeviceType_SerialNOR,
-            .sflashPadType = kSerialFlash_4Pads,
-            .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03
-            .sflashA1Size  = FLASH_SIZE,
-            .lookupTable =
-                {
-                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
-                    // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) |
-                    //  FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
-                    // Read LUTs
-                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
-                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
-                    0,
-                    0,
-
-                    0x24040405,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000406,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x08180420,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x081804D8,
-                    0,
-                    0,
-                    0,
-
-                    0x08180402,
-                    0x00002004,
-                    0,
-                    0,
-
-                    0,
-                    0,
-                    0,
-                    0,
-
-                    0x00000460,
-                },
-        },
     .pageSize           = 256u,
     .sectorSize         = 4u * 1024u,
     .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz,
     .blockSize          = 0x00010000,
     .isUniformBlockSize = false,
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+
+            .busyOffset = 0u, // Status bit 0 indicates busy.
+            .busyBitPolarity = 0u, // Busy when the bit is 1.
+
+            .deviceModeCfgEnable = 1u,
+            .deviceModeType = kDeviceConfigCmdType_QuadEnable,
+            .deviceModeSeq = {
+              .seqId = 4u,
+              .seqNum = 1u,
+            },
+            .deviceModeArg = 0x02,
+            .deviceType    = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType = kSerialFlash_4Pads,
+            .serialClkFreq = kFlexSpiSerialClk_60MHz,
+            .sflashA1Size  = FLASH_SIZE,
+            .lookupTable =
+                {
+                    // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)
+                    // The high 16 bits is command 1 and the low are command 0.
+                    // Within a command, the top 6 bits are the opcode, the next two are the number
+                    // of pads and then last byte is the operand. The operand's meaning changes
+                    // per opcode.
+
+                    // Indices with ROM should always have the same function because the ROM
+                    // bootloader uses it.
+
+                    // 0: ROM: Read LUTs
+                    // Quad version
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xEB /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */),
+                             FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */,
+                                             READ_SDR,  FLEXSPI_4PAD, 0x04),
+                    // Single fast read version, good for debugging.
+                    // FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x0B /* the command to send */,
+                    //                 RADDR_SDR, FLEXSPI_1PAD, 24  /* bits to transmit */),
+                    // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */,
+                    //                 READ_SDR,  FLEXSPI_1PAD, 0x04),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 1: ROM: Read status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,  FLEXSPI_1PAD, 0x05  /* the command to send */,
+                                             READ_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 2: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 3: ROM: Write Enable
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0x00),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 4: Config: Write Status
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x31  /* the command to send */,
+                                             WRITE_SDR, FLEXSPI_1PAD, 0x01),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 5: ROM: Erase Sector
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x20  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 6: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 7: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 8: Block Erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0xD8  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 9: ROM: Page program
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR,   FLEXSPI_1PAD, 0x02  /* the command to send */,
+                                             RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */),
+
+                             FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04  /* data out */,
+                                             STOP,      FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 10: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 11: ROM: Chip erase
+                    SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60  /* the command to send */,
+                                             STOP,    FLEXSPI_1PAD, 0),
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS,
+                             TWO_EMPTY_STEPS),
+
+                    // 12: Empty
+                    EMPTY_SEQUENCE,
+
+                    // 13: ROM: Read SFDP
+                    EMPTY_SEQUENCE,
+
+                    // 14: ROM: Restore no cmd
+                    EMPTY_SEQUENCE,
+
+                    // 15: ROM: Dummy
+                    EMPTY_SEQUENCE
+                },
+        },
 };