diff --git a/stm/Makefile b/stm/Makefile
index 3752e694ab..fa98c6c8e8 100644
--- a/stm/Makefile
+++ b/stm/Makefile
@@ -73,6 +73,7 @@ SRC_STM = \
 	stm32f4xx_usart.c \
 	stm32f4xx_spi.c \
 	stm32f4xx_dac.c \
+	stm32f4xx_rng.c \
 	stm_misc.c \
 	usb_core.c \
 	usb_dcd.c \
diff --git a/stm/lib/stm32f4xx_rng.c b/stm/lib/stm32f4xx_rng.c
new file mode 100644
index 0000000000..3fb52f2911
--- /dev/null
+++ b/stm/lib/stm32f4xx_rng.c
@@ -0,0 +1,398 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_rng.c
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    11-January-2013
+  * @brief This file provides firmware functions to manage the following 
+  *          functionalities of the Random Number Generator (RNG) peripheral:           
+  *           + Initialization and Configuration 
+  *           + Get 32 bit Random number      
+  *           + Interrupts and flags management       
+  *         
+@verbatim
+                                 
+ ===================================================================      
+                 ##### How to use this driver #####
+ ===================================================================          
+ [..]
+   (#) Enable The RNG controller clock using 
+       RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_RNG, ENABLE) function.
+                
+   (#) Activate the RNG peripheral using RNG_Cmd() function.
+            
+   (#) Wait until the 32 bit Random number Generator contains a valid  random data
+      (using polling/interrupt mode). For more details, refer to "Interrupts and 
+      flags management functions" module description.
+             
+   (#) Get the 32 bit Random number using RNG_GetRandomNumber() function
+            
+   (#) To get another 32 bit Random number, go to step 3.       
+         
+                
+@endverbatim
+  *         
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************  
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_conf.h"
+#include "stm32f4xx_rng.h"
+#include "stm32f4xx_rcc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup RNG 
+  * @brief RNG driver modules
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RNG_Private_Functions
+  * @{
+  */ 
+
+/** @defgroup RNG_Group1 Initialization and Configuration functions
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+             ##### Initialization and Configuration functions #####
+ ===============================================================================  
+ [..] This section provides functions allowing to 
+   (+) Initialize the RNG peripheral
+   (+) Enable or disable the RNG peripheral
+   
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  De-initializes the RNG peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void RNG_DeInit(void)
+{
+  /* Enable RNG reset state */
+  RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, ENABLE);
+
+  /* Release RNG from reset state */
+  RCC_AHB2PeriphResetCmd(RCC_AHB2Periph_RNG, DISABLE);
+}
+
+/**
+  * @brief  Enables or disables the RNG peripheral.
+  * @param  NewState: new state of the RNG peripheral.
+  *          This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RNG_Cmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if (NewState != DISABLE)
+  {
+    /* Enable the RNG */
+    RNG->CR |= RNG_CR_RNGEN;
+  }
+  else
+  {
+    /* Disable the RNG */
+    RNG->CR &= ~RNG_CR_RNGEN;
+  }
+}
+/**
+  * @}
+  */
+
+/** @defgroup RNG_Group2 Get 32 bit Random number function
+ *  @brief    Get 32 bit Random number function 
+ *
+
+@verbatim    
+ ===============================================================================
+                 ##### Get 32 bit Random number function #####
+ ===============================================================================  
+ [..] This section provides a function allowing to get the 32 bit Random number  
+  
+   (@)  Before to call this function you have to wait till DRDY flag is set,
+        using RNG_GetFlagStatus(RNG_FLAG_DRDY) function. 
+   
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Returns a 32-bit random number.
+  *   
+  * @note   Before to call this function you have to wait till DRDY (data ready)
+  *         flag is set, using RNG_GetFlagStatus(RNG_FLAG_DRDY) function.
+  * @note   Each time the the Random number data is read (using RNG_GetRandomNumber()
+  *         function), the RNG_FLAG_DRDY flag is automatically cleared.
+  * @note   In the case of a seed error, the generation of random numbers is 
+  *         interrupted for as long as the SECS bit is '1'. If a number is 
+  *         available in the RNG_DR register, it must not be used because it may 
+  *         not have enough entropy. In this case, it is recommended to clear the 
+  *         SEIS bit(using RNG_ClearFlag(RNG_FLAG_SECS) function), then disable 
+  *         and enable the RNG peripheral (using RNG_Cmd() function) to 
+  *         reinitialize and restart the RNG.
+  * @note   In the case of a clock error, the RNG is no more able to generate 
+  *         random numbers because the PLL48CLK clock is not correct. User have 
+  *         to check that the clock controller is correctly configured to provide
+  *         the RNG clock and clear the CEIS bit (using RNG_ClearFlag(RNG_FLAG_CECS) 
+  *         function) . The clock error has no impact on the previously generated 
+  *         random numbers, and the RNG_DR register contents can be used.
+  *         
+  * @param  None
+  * @retval 32-bit random number.
+  */
+uint32_t RNG_GetRandomNumber(void)
+{
+  /* Return the 32 bit random number from the DR register */
+  return RNG->DR;
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup RNG_Group3 Interrupts and flags management functions
+ *  @brief   Interrupts and flags management functions
+ *
+@verbatim   
+ ===============================================================================
+             ##### Interrupts and flags management functions #####
+ ===============================================================================  
+
+ [..] This section provides functions allowing to configure the RNG Interrupts and 
+      to get the status and clear flags and Interrupts pending bits.
+  
+ [..] The RNG provides 3 Interrupts sources and 3 Flags:
+  
+ *** Flags : ***
+ ===============
+ [..] 
+    (#) RNG_FLAG_DRDY :  In the case of the RNG_DR register contains valid 
+        random data. it is cleared by reading the valid data(using 
+        RNG_GetRandomNumber() function).
+
+    (#) RNG_FLAG_CECS : In the case of a seed error detection. 
+      
+    (#) RNG_FLAG_SECS : In the case of a clock error detection.
+              
+ *** Interrupts ***
+ ==================
+ [..] If enabled, an RNG interrupt is pending :
+    
+   (#) In the case of the RNG_DR register contains valid random data. 
+       This interrupt source is cleared once the RNG_DR register has been read 
+       (using RNG_GetRandomNumber() function) until a new valid value is 
+       computed; or 
+   (#) In the case of a seed error : One of the following faulty sequences has 
+       been detected:
+       (++) More than 64 consecutive bits at the same value (0 or 1)
+       (++) More than 32 consecutive alternance of 0 and 1 (0101010101...01)
+       This interrupt source is cleared using RNG_ClearITPendingBit(RNG_IT_SEI)
+       function; or
+   (#) In the case of a clock error : the PLL48CLK (RNG peripheral clock source) 
+       was not correctly detected (fPLL48CLK< fHCLK/16). This interrupt source is
+       cleared using RNG_ClearITPendingBit(RNG_IT_CEI) function.
+       -@- note In this case, User have to check that the clock controller is 
+           correctly configured to provide the RNG clock. 
+
+ *** Managing the RNG controller events : ***
+ ============================================
+ [..] The user should identify which mode will be used in his application to manage 
+      the RNG controller events: Polling mode or Interrupt mode.
+  
+   (#) In the Polling Mode it is advised to use the following functions:
+       (++) RNG_GetFlagStatus() : to check if flags events occur. 
+       (++) RNG_ClearFlag()     : to clear the flags events.
+  
+       -@@- RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag(). it is cleared only 
+            by reading the Random number data.      
+  
+   (#)  In the Interrupt Mode it is advised to use the following functions:
+        (++) RNG_ITConfig()       : to enable or disable the interrupt source.
+        (++) RNG_GetITStatus()    : to check if Interrupt occurs.
+        (++) RNG_ClearITPendingBit() : to clear the Interrupt pending Bit 
+             (corresponding Flag). 
+  
+@endverbatim
+  * @{
+  */ 
+
+/**
+  * @brief  Enables or disables the RNG interrupt.
+  * @note   The RNG provides 3 interrupt sources,
+  *           - Computed data is ready event (DRDY), and           
+  *           - Seed error Interrupt (SEI) and 
+  *           - Clock error Interrupt (CEI), 
+  *         all these interrupts sources are enabled by setting the IE bit in 
+  *         CR register. However, each interrupt have its specific status bit
+  *         (see RNG_GetITStatus() function) and clear bit except the DRDY event
+  *         (see RNG_ClearITPendingBit() function).
+  * @param  NewState: new state of the RNG interrupt.
+  *          This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RNG_ITConfig(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if (NewState != DISABLE)
+  {
+    /* Enable the RNG interrupt */
+    RNG->CR |= RNG_CR_IE;
+  }
+  else
+  {
+    /* Disable the RNG interrupt */
+    RNG->CR &= ~RNG_CR_IE;
+  }
+}
+
+/**
+  * @brief  Checks whether the specified RNG flag is set or not.
+  * @param  RNG_FLAG: specifies the RNG flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg RNG_FLAG_DRDY: Data Ready flag.
+  *            @arg RNG_FLAG_CECS: Clock Error Current flag.
+  *            @arg RNG_FLAG_SECS: Seed Error Current flag.
+  * @retval The new state of RNG_FLAG (SET or RESET).
+  */
+FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_RNG_GET_FLAG(RNG_FLAG));
+
+  /* Check the status of the specified RNG flag */
+  if ((RNG->SR & RNG_FLAG) != (uint8_t)RESET)
+  {
+    /* RNG_FLAG is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* RNG_FLAG is reset */
+    bitstatus = RESET;
+  }
+  /* Return the RNG_FLAG status */
+  return  bitstatus;
+}
+
+
+/**
+  * @brief  Clears the RNG flags.
+  * @param  RNG_FLAG: specifies the flag to clear. 
+  *          This parameter can be any combination of the following values:
+  *            @arg RNG_FLAG_CECS: Clock Error Current flag.
+  *            @arg RNG_FLAG_SECS: Seed Error Current flag.
+  * @note   RNG_FLAG_DRDY can not be cleared by RNG_ClearFlag() function. 
+  *         This flag is cleared only by reading the Random number data (using 
+  *         RNG_GetRandomNumber() function).                           
+  * @retval None
+  */
+void RNG_ClearFlag(uint8_t RNG_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_RNG_CLEAR_FLAG(RNG_FLAG));
+  /* Clear the selected RNG flags */
+  RNG->SR = ~(uint32_t)(((uint32_t)RNG_FLAG) << 4);
+}
+
+/**
+  * @brief  Checks whether the specified RNG interrupt has occurred or not.
+  * @param  RNG_IT: specifies the RNG interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg RNG_IT_CEI: Clock Error Interrupt.
+  *            @arg RNG_IT_SEI: Seed Error Interrupt.                   
+  * @retval The new state of RNG_IT (SET or RESET).
+  */
+ITStatus RNG_GetITStatus(uint8_t RNG_IT)
+{
+  ITStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_RNG_GET_IT(RNG_IT));
+
+  /* Check the status of the specified RNG interrupt */
+  if ((RNG->SR & RNG_IT) != (uint8_t)RESET)
+  {
+    /* RNG_IT is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* RNG_IT is reset */
+    bitstatus = RESET;
+  }
+  /* Return the RNG_IT status */
+  return bitstatus;
+}
+
+
+/**
+  * @brief  Clears the RNG interrupt pending bit(s).
+  * @param  RNG_IT: specifies the RNG interrupt pending bit(s) to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg RNG_IT_CEI: Clock Error Interrupt.
+  *            @arg RNG_IT_SEI: Seed Error Interrupt.
+  * @retval None
+  */
+void RNG_ClearITPendingBit(uint8_t RNG_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_RNG_IT(RNG_IT));
+
+  /* Clear the selected RNG interrupt pending bit */
+  RNG->SR = (uint8_t)~RNG_IT;
+}
+/**
+  * @}
+  */ 
+  
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm/lib/stm32f4xx_rng.h b/stm/lib/stm32f4xx_rng.h
new file mode 100644
index 0000000000..6de413c861
--- /dev/null
+++ b/stm/lib/stm32f4xx_rng.h
@@ -0,0 +1,120 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_rng.h
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    11-January-2013
+  * @brief   This file contains all the functions prototypes for the Random 
+  *          Number Generator(RNG) firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_RNG_H
+#define __STM32F4xx_RNG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup RNG
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/ 
+
+/** @defgroup RNG_Exported_Constants
+  * @{
+  */
+  
+/** @defgroup RNG_flags_definition  
+  * @{
+  */ 
+#define RNG_FLAG_DRDY               ((uint8_t)0x0001) /*!< Data ready */
+#define RNG_FLAG_CECS               ((uint8_t)0x0002) /*!< Clock error current status */
+#define RNG_FLAG_SECS               ((uint8_t)0x0004) /*!< Seed error current status */
+
+#define IS_RNG_GET_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_DRDY) || \
+                                   ((RNG_FLAG) == RNG_FLAG_CECS) || \
+                                   ((RNG_FLAG) == RNG_FLAG_SECS))
+#define IS_RNG_CLEAR_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_CECS) || \
+                                    ((RNG_FLAG) == RNG_FLAG_SECS))
+/**
+  * @}
+  */ 
+
+/** @defgroup RNG_interrupts_definition   
+  * @{
+  */  
+#define RNG_IT_CEI                  ((uint8_t)0x20) /*!< Clock error interrupt */
+#define RNG_IT_SEI                  ((uint8_t)0x40) /*!< Seed error interrupt */
+
+#define IS_RNG_IT(IT) ((((IT) & (uint8_t)0x9F) == 0x00) && ((IT) != 0x00))
+#define IS_RNG_GET_IT(RNG_IT) (((RNG_IT) == RNG_IT_CEI) || ((RNG_IT) == RNG_IT_SEI))
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/ 
+
+/*  Function used to set the RNG configuration to the default reset state *****/ 
+void RNG_DeInit(void);
+
+/* Configuration function *****************************************************/
+void RNG_Cmd(FunctionalState NewState);
+
+/* Get 32 bit Random number function ******************************************/
+uint32_t RNG_GetRandomNumber(void);
+
+/* Interrupts and flags management functions **********************************/
+void RNG_ITConfig(FunctionalState NewState);
+FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG);
+void RNG_ClearFlag(uint8_t RNG_FLAG);
+ITStatus RNG_GetITStatus(uint8_t RNG_IT);
+void RNG_ClearITPendingBit(uint8_t RNG_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_RNG_H */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/