Merge remote-tracking branch 'upstream/master' into stm32-meowbit

2019-12-30 11:17:12 -05:00 · 2019-12-30 11:17:12 -05:00 · 5b9209aa02
commit 5b9209aa02
parent 902e242237 7387f60920
297 changed files with 2934 additions and 3065 deletions
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@ -155,12 +155,15 @@ jobs:
        - "stm32f411ve_discovery"
        - "stm32f412zg_discovery"
        - "stringcar_m0_express"
        - "teknikio_bluebird"
        - "trellis_m4_express"
        - "trinket_m0"
        - "trinket_m0_haxpress"
        - "uchip"
        - "ugame10"
        - "winterbloom_sol"
        - "xinabox_cc03"
        - "xinabox_cs11"
    steps:
    - name: Set up Python 3.5
@ -171,7 +174,7 @@ jobs:
      run: |
        sudo apt-get install -y gettext
        pip install requests sh click setuptools awscli
-        wget https://developer.arm.com/-/media/Files/downloads/gnu-rm/9-2019q4/RC2.1/gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2
+        wget https://adafruit-circuit-python.s3.amazonaws.com/gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2
        sudo tar -C /usr --strip-components=1 -xaf gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2
    - name: Versions
      run: |
--- a/.gitignore
+++ b/.gitignore
@ -65,6 +65,8 @@ TAGS
 *~
 *.DS_Store
 **/*.DS_Store
 *.icloud
 # POEdit mo files
 ####################
--- a/.gitmodules
+++ b/.gitmodules
@ -102,6 +102,9 @@
 [submodule "ports/cxd56/spresense-exported-sdk"]
 	path = ports/cxd56/spresense-exported-sdk
 	url = https://github.com/sonydevworld/spresense-exported-sdk.git
 [submodule "frozen/Adafruit_CircuitPython_SD"]
 	path = frozen/Adafruit_CircuitPython_SD
 	url = https://github.com/adafruit/Adafruit_CircuitPython_SD.git
 [submodule "lib/mp3"]
 	path = lib/mp3
 	url = https://github.com/adafruit/Adafruit_MP3
--- a/BUILDING.md
+++ b/BUILDING.md
@ -0,0 +1,82 @@
 # Building CircuitPython
 Welcome to CircuitPython!  
 This document is a quick-start guide only.
 Detailed guides on how to build CircuitPython can be found in the Adafruit Learn system at
 https://learn.adafruit.com/building-circuitpython/
 ## Setup
 Please ensure you setup your build environment appropriately, as per the guide.  You will need:
 * Linux: https://learn.adafruit.com/building-circuitpython/linux
 * MacOS: https://learn.adafruit.com/building-circuitpython/macos
 * Windows Subsystem for Linux (WSL): https://learn.adafruit.com/building-circuitpython/windows-subsystem-for-linux
 ### Submodules
 This project has a bunch of git submodules.  You will need to update them regularly.
    git submodule sync
    git submodule update --init
 ### mpy-cross
 As part of the build process, mpy-cross is needed to compile .py files into .mpy files.
 To compile (or recompile) mpy-cross:
    make -C mpy-cross 
 # Building
 There a number of ports of CircuitPython!  To build for your board, change to the appropriate ports directory and build.
 Examples:
    cd ports/atmel-samd
    make BOARD=circuitplayground_express
    cd ports/nrf
    make BOARD=circuitplayground_bluefruit
 If you aren't sure what boards exist, have a peek in the boards subdirectory of your port.
 If you have a fast computer with many cores, consider adding `-j` to your build flags, such as `-j17` on
 a 6-core 12-thread machine.
 # Testing
 If you are working on changes to the core language, you might find it useful to run the test suite.
 The test suite in the top level `tests` directory.  It needs the unix port to run.
    cd ports/unix
    make axtls
    make micropython
 Then you can run the test suite:
    cd ../../tests
    ./run-tests
 A successful run will say something like
    676 tests performed (19129 individual testcases)
    676 tests passed
    30 tests skipped: buffered_writer builtin_help builtin_range_binop class_delattr_setattr cmd_parsetree extra_coverage framebuf1 framebuf16 framebuf2 framebuf4 framebuf8 framebuf_subclass mpy_invalid namedtuple_asdict non_compliant resource_stream schedule sys_getsizeof urandom_extra ure_groups ure_span ure_sub ure_sub_unmatched vfs_basic vfs_fat_fileio1 vfs_fat_fileio2 vfs_fat_more vfs_fat_oldproto vfs_fat_ramdisk vfs_userfs
 # Debugging
 The easiest way to debug CircuitPython on hardware is with a JLink device, JLinkGDBServer, and an appropriate GDB.   
 Instructions can be found at https://learn.adafruit.com/debugging-the-samd21-with-gdb
 If using JLink, you'll need both the `JLinkGDBServer` and `arm-none-eabi-gdb` running.
 Example:
    JLinkGDBServer -if SWD -device ATSAMD51J19
    arm-none-eabi-gdb build-metro_m4_express/firmware.elf -iex "target extended-remote :2331"
 If your port/build includes `arm-none-eabi-gdb-py`, consider using it instead, as it can be used for better register
 debugging with https://github.com/bnahill/PyCortexMDebug
--- a/docs/index.rst
+++ b/docs/index.rst
@ -43,6 +43,7 @@ Full Table of Contents
   ../README
   ../CONTRIBUTING
   ../BUILDING
   ../CODE_OF_CONDUCT
   ../license.rst
--- a/frozen/Adafruit_CircuitPython_BusDevice
+++ b/frozen/Adafruit_CircuitPython_BusDevice
@ -1 +1 @@
-Subproject commit 52d87bd7e571af66ecb57ee32b5af92531134150
+Subproject commit 2000ae3a7c5d60b850c9546a16425aee279e2a36
--- a/frozen/Adafruit_CircuitPython_CircuitPlayground
+++ b/frozen/Adafruit_CircuitPython_CircuitPlayground
@ -1 +1 @@
-Subproject commit d87ea261c40ecbc6d893d72d337beefbea1cf932
+Subproject commit 82ba9e40dfff41fdc0541636afde4936c930d86c
--- a/frozen/Adafruit_CircuitPython_Crickit
+++ b/frozen/Adafruit_CircuitPython_Crickit
@ -1 +1 @@
-Subproject commit a6100fb5d867c7f4980f071119bfa7e0a76e1d47
+Subproject commit 5534662902a223ac8562e6f999d6359e4c17dab1
--- a/frozen/Adafruit_CircuitPython_DotStar
+++ b/frozen/Adafruit_CircuitPython_DotStar
@ -1 +1 @@
-Subproject commit 409e90902ac49720c4add985e8e1a1660bbe63a0
+Subproject commit 01e89a8437c78b62d4d655c745ded57e26dc747a
--- a/frozen/Adafruit_CircuitPython_HID
+++ b/frozen/Adafruit_CircuitPython_HID
@ -1 +1 @@
-Subproject commit 89faee0eb08a6855e14f117c514fecf2dd90769d
+Subproject commit a23b80569f23ef109667dd8c595d319e8a30d620
--- a/frozen/Adafruit_CircuitPython_Motor
+++ b/frozen/Adafruit_CircuitPython_Motor
@ -1 +1 @@
-Subproject commit ddc74844983b35b027bd45091c7b8bb3c8d7a2d1
+Subproject commit f69fc9b47fa25ba1414eb3d5c82f05013280c0d2
--- a/frozen/Adafruit_CircuitPython_NeoPixel
+++ b/frozen/Adafruit_CircuitPython_NeoPixel
@ -1 +1 @@
-Subproject commit c0bdd8b10383725ee9293f5d88fb8d47eb1272bd
+Subproject commit ff99d55115f81899902c2c4a84fdfbea9ae83823
--- a/frozen/Adafruit_CircuitPython_SD
+++ b/frozen/Adafruit_CircuitPython_SD
@ -0,0 +1 @@
 Subproject commit dd0fe8530a2dcc64ac95bb3e116af2158dcd7cd2
--- a/lib/mp3
+++ b/lib/mp3
@ -1 +1 @@
-Subproject commit 2a3cc7873b5c642d4bb60043dc14d2555e3377a5
+Subproject commit c3c664bf4db6a36d11808dfcbb5dbf7cff1715b8
--- a/locale/ID.po
+++ b/locale/ID.po
@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@ -294,7 +307,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -406,6 +419,10 @@ msgstr "Tidak bisa mendapatkan pull pada saat mode output"
 msgid "Cannot get temperature"
 msgstr "Tidak bisa mendapatkan temperatur. status: 0x%02x"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@ -454,6 +471,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@ -515,7 +542,7 @@ msgid "Couldn't allocate second buffer"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@ -632,28 +659,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Gagal untuk melepaskan mutex, status: 0x%08lX"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -826,13 +843,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@ -847,11 +857,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
@ -920,6 +930,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@ -1103,10 +1117,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
@ -1116,21 +1127,11 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
 #, fuzzy
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 "Tegangan dari mikrokontroler turun atau mati. Pastikan sumber tegangan "
 "memberikan daya\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@ -1164,10 +1165,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Untuk keluar, silahkan reset board tanpa "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Terlalu banyak channel dalam sampel"
@ -1246,6 +1243,10 @@ msgstr ""
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1323,12 +1324,8 @@ msgstr ""
 "Untuk menampilkan modul built-in silahkan ketik `help(\"modules\")`.\n"
 #: supervisor/shared/safe_mode.c
-#, fuzzy
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgid ""
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 "Anda sedang menjalankan mode aman (safe mode) yang berarti sesuatu yang "
 "sangat buruk telah terjadi.\n"
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@ -2853,6 +2850,19 @@ msgstr ""
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Dukungan soft device, id: 0x%08lX, pc: 0x%08l"
 #, fuzzy
 #~ msgid ""
 #~ "The microcontroller's power dipped. Please make sure your power supply "
 #~ "provides\n"
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ msgstr ""
 #~ "Tegangan dari mikrokontroler turun atau mati. Pastikan sumber tegangan "
 #~ "memberikan daya\n"
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "Untuk keluar, silahkan reset board tanpa "
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) tidak ada"
@ -2870,6 +2880,14 @@ msgstr ""
 #~ "Gunakan esptool untuk menghapus flash dan upload ulang Python sebagai "
 #~ "gantinya"
 #, fuzzy
 #~ msgid ""
 #~ "You are running in safe mode which means something unanticipated "
 #~ "happened.\n"
 #~ msgstr ""
 #~ "Anda sedang menjalankan mode aman (safe mode) yang berarti sesuatu yang "
 #~ "sangat buruk telah terjadi.\n"
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[addrinfo error %d]"
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@ -292,7 +305,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -400,6 +413,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr ""
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@ -444,6 +461,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@ -505,7 +532,7 @@ msgid "Couldn't allocate second buffer"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@ -621,28 +648,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -815,13 +832,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@ -836,11 +846,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
@ -909,6 +919,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@ -1087,10 +1101,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
@ -1101,18 +1112,11 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@ -1145,10 +1149,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@ -1227,6 +1227,10 @@ msgstr ""
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1297,8 +1301,7 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Pascal Deneaux\n"
 "Language-Team: Sebastian Plamauer, Pascal Deneaux\n"
@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "Der Code wurde ausgeführt. Warte auf reload.\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Datei \"%q\""
@ -294,7 +307,7 @@ msgid "Array values should be single bytes."
 msgstr "Array-Werte sollten aus Einzelbytes bestehen."
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -404,6 +417,10 @@ msgstr "Pull up im Ausgabemodus nicht möglich"
 msgid "Cannot get temperature"
 msgstr "Kann Temperatur nicht holen"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Kann nicht beite Kanäle auf dem gleichen Pin ausgeben"
@ -448,6 +465,16 @@ msgstr "Kann nicht ohne MOSI-Pin schreiben."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "Schreiben von CharacteristicBuffer ist nicht vorgesehen"
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Clock pin init fehlgeschlagen."
@ -509,8 +536,8 @@ msgid "Couldn't allocate second buffer"
 msgstr "Konnte second buffer nicht zuteilen"
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Absturz in HardFault_Handler.\n"
+msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@ -625,28 +652,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Mutex konnte nicht freigegeben werden. Status: 0x%04x"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Datei existiert"
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -823,17 +840,6 @@ msgstr "Länge muss ein int sein"
 msgid "Length must be non-negative"
 msgstr "Länge darf nicht negativ sein"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 "Sieht aus, als wäre der CircuitPython-Kernel-Code abgestürzt. Uups!\n"
 "Bitte melde das Problem unter https://github.com/adafruit/circuitpython/"
 "issues\n"
 "mit dem Inhalt deines CIRCUITPY-Laufwerks und dieser Nachricht:\n"
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "MISO pin Initialisierung fehlgeschlagen"
@ -848,14 +854,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Maximaler x-Wert beim Spiegeln ist %d"
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 "MicroPython-NLR-Sprung ist fehlgeschlagen. Wahrscheinlich "
 "Speicherbeschädigung.\n"
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Schwerwiegender MicroPython-Fehler\n"
+msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@ -924,6 +928,10 @@ msgstr "Kein Speicherplatz mehr verfügbar auf dem Gerät"
 msgid "No such file/directory"
 msgstr "Keine solche Datei/Verzeichnis"
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@ -1110,17 +1118,8 @@ msgstr "Stream fehlt readinto() oder write() Methode."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 "Der CircuitPython-Heap war beschädigt, weil der Stack zu klein war.\n"
 "Bitte erhöhe die stack size limits und drücke die Reset-Taste (nach Auswurf "
 "des CIRCUITPY-Laufwerks)\n"
 "Wenn du den Stack nicht geändert hast, melde bitte das Problem unter https://"
 "github.com/adafruit/circuitpython/issues\n"
 "mit dem Inhalt deines CIRCUITPY-Laufwerks.\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
@ -1132,23 +1131,10 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 "Die Stromversorgung des Mikrocontrollers ist eingebrochen. Stelle sicher, "
 "dass deine Stromversorgung genug Leistung für die gesamte Schaltung zur "
 "Verfügung stellt und drücke die Reset-Taste (nach Auswurf des CIRCUITPY-"
 "Laufwerks)\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 "Die Reset-Taste wurde beim Booten von CircuitPython gedrückt. Drücke sie "
 "erneut um den abgesicherten Modus zu verlassen. \n"
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@ -1182,10 +1168,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Zum beenden, resette bitte das board ohne "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Zu viele Kanäle im sample"
@ -1264,6 +1246,10 @@ msgstr "Unerwarteter nrfx uuid-Typ"
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1343,11 +1329,8 @@ msgstr ""
 "aus.\n"
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 "Sie laufen im abgesicherten Modus, was bedeutet, dass etwas Unerwartetes "
 "passiert ist.\n"
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@ -2737,6 +2720,9 @@ msgstr ""
 #~ msgid "Could not decode ble_uuid, err 0x%04x"
 #~ msgstr "Konnte ble_uuid nicht decodieren. Status: 0x%04x"
 #~ msgid "Crash into the HardFault_Handler.\n"
 #~ msgstr "Absturz in HardFault_Handler.\n"
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Daten sind zu groß für das advertisement packet"
@ -2871,9 +2857,27 @@ msgstr ""
 #~ msgid "Invalid data pin"
 #~ msgstr "Ungültiger data pin"
 #~ msgid ""
 #~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 #~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 #~ " with the contents of your CIRCUITPY drive and this message:\n"
 #~ msgstr ""
 #~ "Sieht aus, als wäre der CircuitPython-Kernel-Code abgestürzt. Uups!\n"
 #~ "Bitte melde das Problem unter https://github.com/adafruit/circuitpython/"
 #~ "issues\n"
 #~ "mit dem Inhalt deines CIRCUITPY-Laufwerks und dieser Nachricht:\n"
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "Maximale PWM Frequenz ist %dHz"
 #~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
 #~ msgstr ""
 #~ "MicroPython-NLR-Sprung ist fehlgeschlagen. Wahrscheinlich "
 #~ "Speicherbeschädigung.\n"
 #~ msgid "MicroPython fatal error.\n"
 #~ msgstr "Schwerwiegender MicroPython-Fehler\n"
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "Minimale PWM Frequenz ist %dHz"
@ -2920,6 +2924,41 @@ msgstr ""
 #~ msgid "STA required"
 #~ msgstr "STA erforderlich"
 #~ msgid ""
 #~ "The CircuitPython heap was corrupted because the stack was too small.\n"
 #~ "Please increase stack size limits and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ "If you didn't change the stack, then file an issue here with the contents "
 #~ "of your CIRCUITPY drive:\n"
 #~ msgstr ""
 #~ "Der CircuitPython-Heap war beschädigt, weil der Stack zu klein war.\n"
 #~ "Bitte erhöhe die stack size limits und drücke die Reset-Taste (nach "
 #~ "Auswurf des CIRCUITPY-Laufwerks)\n"
 #~ "Wenn du den Stack nicht geändert hast, melde bitte das Problem unter "
 #~ "https://github.com/adafruit/circuitpython/issues\n"
 #~ "mit dem Inhalt deines CIRCUITPY-Laufwerks.\n"
 #~ msgid ""
 #~ "The microcontroller's power dipped. Please make sure your power supply "
 #~ "provides\n"
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ msgstr ""
 #~ "Die Stromversorgung des Mikrocontrollers ist eingebrochen. Stelle sicher, "
 #~ "dass deine Stromversorgung genug Leistung für die gesamte Schaltung zur "
 #~ "Verfügung stellt und drücke die Reset-Taste (nach Auswurf des CIRCUITPY-"
 #~ "Laufwerks)\n"
 #~ msgid ""
 #~ "The reset button was pressed while booting CircuitPython. Press again to "
 #~ "exit safe mode.\n"
 #~ msgstr ""
 #~ "Die Reset-Taste wurde beim Booten von CircuitPython gedrückt. Drücke sie "
 #~ "erneut um den abgesicherten Modus zu verlassen. \n"
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "Zum beenden, resette bitte das board ohne "
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) existiert nicht"
@ -2942,6 +2981,13 @@ msgstr ""
 #~ msgid "Voice index too high"
 #~ msgstr "Voice index zu hoch"
 #~ msgid ""
 #~ "You are running in safe mode which means something unanticipated "
 #~ "happened.\n"
 #~ msgstr ""
 #~ "Sie laufen im abgesicherten Modus, was bedeutet, dass etwas Unerwartetes "
 #~ "passiert ist.\n"
 #~ msgid "buffer too long"
 #~ msgstr "Buffer zu lang"
--- a/locale/en_US.po
+++ b/locale/en_US.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@ -292,7 +305,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -400,6 +413,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr ""
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@ -444,6 +461,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@ -505,7 +532,7 @@ msgid "Couldn't allocate second buffer"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@ -621,28 +648,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -815,13 +832,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@ -836,11 +846,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
@ -909,6 +919,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@ -1087,10 +1101,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
@ -1101,18 +1112,11 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@ -1145,10 +1149,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@ -1227,6 +1227,10 @@ msgstr ""
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1297,8 +1301,7 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
--- a/locale/en_x_pirate.po
+++ b/locale/en_x_pirate.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: @sommersoft, @MrCertainly\n"
@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "Captin's orders are complete. Holdin' fast fer reload.\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@ -294,7 +307,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -404,6 +417,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr ""
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@ -448,6 +465,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@ -509,7 +536,7 @@ msgid "Couldn't allocate second buffer"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@ -625,28 +652,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -819,13 +836,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@ -840,11 +850,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
@ -913,6 +923,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@ -1091,10 +1105,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
@ -1105,18 +1116,11 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@ -1149,10 +1153,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@ -1231,6 +1231,10 @@ msgstr ""
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1301,8 +1305,7 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
--- a/locale/es.po
+++ b/locale/es.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "El código terminó su ejecución. Esperando para recargar.\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Archivo \"%q\""
@ -296,10 +309,8 @@ msgid "Array values should be single bytes."
 msgstr "Valores del array deben ser bytes individuales."
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 "Intento de allocation de heap cuando la VM de MicroPython no estaba "
 "corriendo.\n"
 #: main.c
 msgid "Auto-reload is off.\n"
@ -408,6 +419,10 @@ msgstr "No puede ser pull mientras este en modo de salida"
 msgid "Cannot get temperature"
 msgstr "No se puede obtener la temperatura."
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "No se puede tener ambos canales en el mismo pin"
@ -452,6 +467,16 @@ msgstr "No se puede escribir sin pin MOSI."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "CharateristicBuffer escritura no proporcionada"
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Clock pin init fallido"
@ -513,8 +538,8 @@ msgid "Couldn't allocate second buffer"
 msgstr "No se pudo asignar el segundo buffer"
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Choque en el HardFault_Handler.\n"
+msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@ -629,28 +654,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "No se puede liberar el mutex, err 0x%04x"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "El archivo ya existe"
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr "Falló borrado de flash"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr "Falló el iniciar borrado de flash, err 0x%04x"
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "Falló la escritura"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr "Falló el iniciar la escritura de flash, err 0x%04x"
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr "Frecuencia capturada por encima de la capacidad. Captura en pausa."
@ -825,17 +840,6 @@ msgstr "Length debe ser un int"
 msgid "Length must be non-negative"
 msgstr "Longitud no deberia ser negativa"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 "Parece que nuestro código de CircuitPython ha fallado con fuerza. Whoops!\n"
 "Por favor, crea un issue en https://github.com/adafruit/circuitpython/"
 "issues\n"
 " con el contenido de su unidad CIRCUITPY y este mensaje:\n"
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "MISO pin init fallido."
@ -850,12 +854,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Valor máximo de x cuando se refleja es %d"
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr "MicroPython NLR salto fallido. Probable corrupción de memoria.\n"
+msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Error fatal de MicroPython.\n"
+msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@ -923,6 +927,10 @@ msgstr "No queda espacio en el dispositivo"
 msgid "No such file/directory"
 msgstr "No existe el archivo/directorio"
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@ -1112,17 +1120,8 @@ msgstr "A Stream le falta el método readinto() o write()."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 "El heap de CircuitPython estaba corrupto porque el stack era demasiado "
 "pequeño.\n"
 "Aumente los límites del tamaño del stacj y presione reset (después de "
 "expulsarCIRCUITPY).\n"
 "Si no cambió el stack, entonces reporte un issue aquí con el contenido desu "
 "unidad CIRCUITPY:\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
@ -1132,23 +1131,10 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 "La alimentación del microcontrolador cayó. Por favor asegurate de que tu "
 "fuente de alimentación provee\n"
 "suficiente energia para todo el circuito y presiona el botón de reset "
 "(despuesde expulsar CIRCUITPY).\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 "El botón reset fue presionado mientras arrancaba CircuitPython. Presiona "
 "otra vez para salir del modo seguro.\n"
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@ -1182,10 +1168,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr "Ancho del Tile debe dividir exactamente el ancho de mapa de bits"
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Para salir, por favor reinicia la tarjeta sin "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Demasiados canales en sample."
@ -1264,6 +1246,10 @@ msgstr "Tipo de uuid nrfx inesperado"
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1341,11 +1327,8 @@ msgstr ""
 "Para listar los módulos incorporados por favor haga `help(\"modules\")`.\n"
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 "Estás ejecutando en modo seguro, lo cual significa que algo realmente malo "
 "ha sucedido.\n"
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@ -2702,6 +2685,11 @@ msgstr "paso cero"
 #~ msgid "Address is not %d bytes long or is in wrong format"
 #~ msgstr "Direción no es %d bytes largo o esta en el formato incorrecto"
 #~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
 #~ msgstr ""
 #~ "Intento de allocation de heap cuando la VM de MicroPython no estaba "
 #~ "corriendo.\n"
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "No se pueden agregar servicio en modo Central"
@ -2735,6 +2723,9 @@ msgstr "paso cero"
 #~ msgid "Could not decode ble_uuid, err 0x%04x"
 #~ msgstr "No se puede descodificar ble_uuid, err 0x%04x"
 #~ msgid "Crash into the HardFault_Handler.\n"
 #~ msgstr "Choque en el HardFault_Handler.\n"
 #, fuzzy
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Los datos no caben en el paquete de anuncio."
@ -2849,6 +2840,15 @@ msgstr "paso cero"
 #~ msgid "Failed to write gatts value, err 0x%04x"
 #~ msgstr "No se puede escribir el valor del atributo. err: 0x%04x"
 #~ msgid "Flash erase failed"
 #~ msgstr "Falló borrado de flash"
 #~ msgid "Flash erase failed to start, err 0x%04x"
 #~ msgstr "Falló el iniciar borrado de flash, err 0x%04x"
 #~ msgid "Flash write failed to start, err 0x%04x"
 #~ msgstr "Falló el iniciar la escritura de flash, err 0x%04x"
 #~ msgid "Function requires lock."
 #~ msgstr "La función requiere lock"
@ -2864,9 +2864,26 @@ msgstr "paso cero"
 #~ msgid "Invalid data pin"
 #~ msgstr "Pin de datos inválido"
 #~ msgid ""
 #~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 #~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 #~ " with the contents of your CIRCUITPY drive and this message:\n"
 #~ msgstr ""
 #~ "Parece que nuestro código de CircuitPython ha fallado con fuerza. "
 #~ "Whoops!\n"
 #~ "Por favor, crea un issue en https://github.com/adafruit/circuitpython/"
 #~ "issues\n"
 #~ " con el contenido de su unidad CIRCUITPY y este mensaje:\n"
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "La frecuencia máxima del PWM es %dhz."
 #~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
 #~ msgstr "MicroPython NLR salto fallido. Probable corrupción de memoria.\n"
 #~ msgid "MicroPython fatal error.\n"
 #~ msgstr "Error fatal de MicroPython.\n"
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "La frecuencia mínima del PWM es 1hz"
@ -2926,9 +2943,44 @@ msgstr "paso cero"
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgid ""
 #~ "The CircuitPython heap was corrupted because the stack was too small.\n"
 #~ "Please increase stack size limits and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ "If you didn't change the stack, then file an issue here with the contents "
 #~ "of your CIRCUITPY drive:\n"
 #~ msgstr ""
 #~ "El heap de CircuitPython estaba corrupto porque el stack era demasiado "
 #~ "pequeño.\n"
 #~ "Aumente los límites del tamaño del stacj y presione reset (después de "
 #~ "expulsarCIRCUITPY).\n"
 #~ "Si no cambió el stack, entonces reporte un issue aquí con el contenido "
 #~ "desu unidad CIRCUITPY:\n"
 #~ msgid ""
 #~ "The microcontroller's power dipped. Please make sure your power supply "
 #~ "provides\n"
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ msgstr ""
 #~ "La alimentación del microcontrolador cayó. Por favor asegurate de que tu "
 #~ "fuente de alimentación provee\n"
 #~ "suficiente energia para todo el circuito y presiona el botón de reset "
 #~ "(despuesde expulsar CIRCUITPY).\n"
 #~ msgid ""
 #~ "The reset button was pressed while booting CircuitPython. Press again to "
 #~ "exit safe mode.\n"
 #~ msgstr ""
 #~ "El botón reset fue presionado mientras arrancaba CircuitPython. Presiona "
 #~ "otra vez para salir del modo seguro.\n"
 #~ msgid "Tile indices must be 0 - 255"
 #~ msgstr "Los índices de Tile deben ser 0 - 255"
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "Para salir, por favor reinicia la tarjeta sin "
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) no existe"
@ -2951,6 +3003,13 @@ msgstr "paso cero"
 #~ msgid "Voice index too high"
 #~ msgstr "Index de voz demasiado alto"
 #~ msgid ""
 #~ "You are running in safe mode which means something unanticipated "
 #~ "happened.\n"
 #~ msgstr ""
 #~ "Estás ejecutando en modo seguro, lo cual significa que algo realmente "
 #~ "malo ha sucedido.\n"
 #~ msgid "bad GATT role"
 #~ msgstr "mal GATT role"
--- a/locale/fil.po
+++ b/locale/fil.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  File \"%q\""
@ -296,7 +309,7 @@ msgid "Array values should be single bytes."
 msgstr "Array values ay dapat single bytes."
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -408,6 +421,10 @@ msgstr "Hindi makakakuha ng pull habang nasa output mode"
 msgid "Cannot get temperature"
 msgstr "Hindi makuha ang temperatura. status 0x%02x"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Hindi maaaring output ang mga parehong channel sa parehong pin"
@ -452,6 +469,16 @@ msgstr "Hindi maaring isulat kapag walang MOSI pin."
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Nabigo sa pag init ng Clock pin."
@ -514,8 +541,8 @@ msgid "Couldn't allocate second buffer"
 msgstr "Hindi ma-iallocate ang second buffer"
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Nagcrash sa HardFault_Handler.\n"
+msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@ -635,28 +662,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Nabigo sa pagrelease ng mutex, status: 0x%08lX"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Mayroong file"
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -831,17 +848,6 @@ msgstr "Haba ay dapat int"
 msgid "Length must be non-negative"
 msgstr "Haba ay dapat hindi negatibo"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 "Mukhang ang core CircuitPython code nag crash. Ay!\n"
 "Maaring mag file ng issue sa https://github.com/adafruit/circuitpython/"
 "issues\n"
 "kasama ng laman ng iyong CIRCUITPY drive at ang message na ito:\n"
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "Hindi ma-initialize ang MISO pin."
@ -856,12 +862,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr "CircuitPython NLR jump nabigo. Maaring memory corruption.\n"
+msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "CircuitPython fatal na pagkakamali.\n"
+msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@ -929,6 +935,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr "Walang file/directory"
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@ -1116,16 +1126,8 @@ msgstr "Stream kulang ng readinto() o write() method."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 "Ang CircuitPython heap ay na corrupt dahil ang stack ay maliit.\n"
 "Maaring i-increase ang stack size limit at i-press ang reset (pagkatapos i-"
 "eject ang CIRCUITPY.\n"
 "Kung hindi mo pinalitan ang stack, mag file ng issue dito kasama ng laman ng "
 "CIRCUITPY drive:\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
@ -1135,22 +1137,10 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 "Ang kapangyarihan ng mikrokontroller ay bumaba. Mangyaring suriin ang power "
 "supply \n"
 "pindutin ang reset (pagkatapos i-eject ang CIRCUITPY).\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 "Ang reset button ay pinindot habang nag boot ang CircuitPython. Pindutin "
 "ulit para lumabas sa safe mode.\n"
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@ -1184,10 +1174,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Para lumabas, paki-reset ang board na wala ang "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Sobra ang channels sa sample."
@ -1267,6 +1253,10 @@ msgstr "hindi inaasahang indent"
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1346,9 +1336,8 @@ msgstr ""
 "Para makita ang listahan ng modules, `help(“modules”)`.\n"
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
-"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
 msgstr "Ikaw ay tumatakbo sa safe mode dahil may masamang nangyari.\n"
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@ -2735,6 +2724,9 @@ msgstr "zero step"
 #~ msgid "Cannot update i/f status"
 #~ msgstr "Hindi ma-update i/f status"
 #~ msgid "Crash into the HardFault_Handler.\n"
 #~ msgstr "Nagcrash sa HardFault_Handler.\n"
 #, fuzzy
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Hindi makasya ang data sa loob ng advertisement packet"
@ -2871,9 +2863,25 @@ msgstr "zero step"
 #~ msgid "Invalid data pin"
 #~ msgstr "Mali ang data pin"
 #~ msgid ""
 #~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 #~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 #~ " with the contents of your CIRCUITPY drive and this message:\n"
 #~ msgstr ""
 #~ "Mukhang ang core CircuitPython code nag crash. Ay!\n"
 #~ "Maaring mag file ng issue sa https://github.com/adafruit/circuitpython/"
 #~ "issues\n"
 #~ "kasama ng laman ng iyong CIRCUITPY drive at ang message na ito:\n"
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "Pinakamataas na PWM frequency ay %dhz."
 #~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
 #~ msgstr "CircuitPython NLR jump nabigo. Maaring memory corruption.\n"
 #~ msgid "MicroPython fatal error.\n"
 #~ msgstr "CircuitPython fatal na pagkakamali.\n"
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "Pinakamababang PWM frequency ay 1hz."
@ -2918,6 +2926,39 @@ msgstr "zero step"
 #~ msgid "STA required"
 #~ msgstr "STA kailangan"
 #~ msgid ""
 #~ "The CircuitPython heap was corrupted because the stack was too small.\n"
 #~ "Please increase stack size limits and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ "If you didn't change the stack, then file an issue here with the contents "
 #~ "of your CIRCUITPY drive:\n"
 #~ msgstr ""
 #~ "Ang CircuitPython heap ay na corrupt dahil ang stack ay maliit.\n"
 #~ "Maaring i-increase ang stack size limit at i-press ang reset (pagkatapos "
 #~ "i-eject ang CIRCUITPY.\n"
 #~ "Kung hindi mo pinalitan ang stack, mag file ng issue dito kasama ng laman "
 #~ "ng CIRCUITPY drive:\n"
 #~ msgid ""
 #~ "The microcontroller's power dipped. Please make sure your power supply "
 #~ "provides\n"
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ msgstr ""
 #~ "Ang kapangyarihan ng mikrokontroller ay bumaba. Mangyaring suriin ang "
 #~ "power supply \n"
 #~ "pindutin ang reset (pagkatapos i-eject ang CIRCUITPY).\n"
 #~ msgid ""
 #~ "The reset button was pressed while booting CircuitPython. Press again to "
 #~ "exit safe mode.\n"
 #~ msgstr ""
 #~ "Ang reset button ay pinindot habang nag boot ang CircuitPython. Pindutin "
 #~ "ulit para lumabas sa safe mode.\n"
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "Para lumabas, paki-reset ang board na wala ang "
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "Walang UART(%d)"
@ -2937,6 +2978,11 @@ msgstr "zero step"
 #~ msgid "Voice index too high"
 #~ msgstr "Index ng Voice ay masyadong mataas"
 #~ msgid ""
 #~ "You are running in safe mode which means something unanticipated "
 #~ "happened.\n"
 #~ msgstr "Ikaw ay tumatakbo sa safe mode dahil may masamang nangyari.\n"
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[addrinfo error %d]"
--- a/locale/fr.po
+++ b/locale/fr.po
@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2019-04-14 20:05+0100\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "Fin d'éxecution du code. En attente de recharge.\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Fichier \"%q\""
@ -300,9 +313,8 @@ msgid "Array values should be single bytes."
 msgstr "Les valeurs du tableau doivent être des octets simples 'bytes'."
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 "Tentative d'allocation de tas alors que la VM MicroPython ne tourne pas.\n"
 #: main.c
 msgid "Auto-reload is off.\n"
@ -413,6 +425,10 @@ msgstr "Ne peut être tiré ('pull') en mode 'output'"
 msgid "Cannot get temperature"
 msgstr "Impossible de lire la température"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Les 2 canaux de sortie ne peuvent être sur la même broche"
@ -458,6 +474,16 @@ msgstr "Impossible d'écrire sans broche MOSI."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "Ecriture sur 'CharacteristicBuffer' non fournie"
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Echec de l'init. de la broche d'horloge"
@ -520,8 +546,8 @@ msgid "Couldn't allocate second buffer"
 msgstr "Impossible d'allouer le 2e tampon"
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Plantage vers le 'HardFault_Handler'.\n"
+msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@ -639,28 +665,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Impossible de libérer mutex, err 0x%04x"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Le fichier existe"
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr "L'effacement de la flash a échoué"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr "Echec du démarrage de l'effacement de la flash, err 0x%04x"
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "L'écriture de la flash échoué"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr "Echec du démarrage de l'écriture de la flash, err 0x%04x"
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr "La fréquence capturée est au delà des capacités. Capture en pause."
@ -839,17 +855,6 @@ msgstr "La longueur doit être un nombre entier"
 msgid "Length must be non-negative"
 msgstr "La longueur ne doit pas être négative"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 "On dirait que notre code CircuitPython a durement planté. Oups !\n"
 "Merci de remplir un ticket sur https://github.com/adafruit/circuitpython/"
 "issues\n"
 "avec le contenu de votre lecteur CIRCUITPY et ce message:\n"
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "Echec de l'init. de la broche MISO"
@ -864,12 +869,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "La valeur max. de x est %d lors d'une opération miroir"
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr "Saut MicroPython NLR a échoué. Corruption de mémoire possible.\n"
+msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Erreur fatale de MicroPython.\n"
+msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@ -937,6 +942,10 @@ msgstr "Il n'y a plus d'espace libre sur le périphérique"
 msgid "No such file/directory"
 msgstr "Fichier/dossier introuvable"
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@ -1131,17 +1140,8 @@ msgstr "Il manque une méthode readinto() ou write() au flux."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 "Le tas (heap) de CircuitPython a été corrompu parce que la pile était trop "
 "petite.\n"
 "Augmentez la limite de taille de la pile et appuyez sur 'reset' (après avoir "
 "éjecté CIRCUITPY).\n"
 "Si vous n'avez pas modifié la pile, merci de remplir un ticket avec le "
 "contenu  de votre lecteur CIRCUITPY :\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
@ -1150,25 +1150,11 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
 #, fuzzy
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 "L'alimentation du microcontroleur a chuté. Merci de vérifier que votre "
 "alimentation fournit\n"
 "suffisamment de puissance pour l'ensemble du circuit et appuyez sur "
 "'reset' (après avoir éjecté CIRCUITPY).\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 "Le bouton 'reset' a été appuyé pendant le démarrage de CircuitPython. "
 "Appuyer de nouveau pour quitter de le mode sans-échec.\n"
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@ -1203,10 +1189,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr "La largeur de la tuile doit diviser exactement la largeur de l'image"
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Pour quitter, redémarrez la carte SVP sans "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Trop de canaux dans l'échantillon."
@ -1289,6 +1271,10 @@ msgstr "Type inattendu pour l'uuid nrfx"
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1367,11 +1353,8 @@ msgstr ""
 "Pour lister les modules inclus, tapez `help(\"modules\")`.\n"
 #: supervisor/shared/safe_mode.c
-#, fuzzy
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgid ""
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 "Vous êtes en mode sans-échec ce qui signifie qu'un imprévu est survenu.\n"
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@ -2753,6 +2736,10 @@ msgstr "'step' nul"
 #~ msgid "Address is not %d bytes long or is in wrong format"
 #~ msgstr "L'adresse n'est pas longue de %d octets ou est d'un format erroné"
 #~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
 #~ msgstr ""
 #~ "Tentative d'allocation de tas alors que la VM MicroPython ne tourne pas.\n"
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "Impossible d'ajouter des services en mode Central"
@ -2786,6 +2773,9 @@ msgstr "'step' nul"
 #~ msgid "Could not decode ble_uuid, err 0x%04x"
 #~ msgstr "Impossible de décoder le 'ble_uuid', err 0x%04x"
 #~ msgid "Crash into the HardFault_Handler.\n"
 #~ msgstr "Plantage vers le 'HardFault_Handler'.\n"
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Données trop volumineuses pour le paquet de diffusion"
@ -2912,6 +2902,15 @@ msgstr "'step' nul"
 #~ msgid "Failed to write gatts value, err 0x%04x"
 #~ msgstr "Impossible d'écrire la valeur de 'gatts', err 0x%04x"
 #~ msgid "Flash erase failed"
 #~ msgstr "L'effacement de la flash a échoué"
 #~ msgid "Flash erase failed to start, err 0x%04x"
 #~ msgstr "Echec du démarrage de l'effacement de la flash, err 0x%04x"
 #~ msgid "Flash write failed to start, err 0x%04x"
 #~ msgstr "Echec du démarrage de l'écriture de la flash, err 0x%04x"
 #~ msgid "Function requires lock."
 #~ msgstr "La fonction nécessite un verrou."
@ -2927,9 +2926,25 @@ msgstr "'step' nul"
 #~ msgid "Invalid data pin"
 #~ msgstr "Broche de données invalide"
 #~ msgid ""
 #~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 #~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 #~ " with the contents of your CIRCUITPY drive and this message:\n"
 #~ msgstr ""
 #~ "On dirait que notre code CircuitPython a durement planté. Oups !\n"
 #~ "Merci de remplir un ticket sur https://github.com/adafruit/circuitpython/"
 #~ "issues\n"
 #~ "avec le contenu de votre lecteur CIRCUITPY et ce message:\n"
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "La fréquence de PWM maximale est %dHz"
 #~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
 #~ msgstr "Saut MicroPython NLR a échoué. Corruption de mémoire possible.\n"
 #~ msgid "MicroPython fatal error.\n"
 #~ msgstr "Erreur fatale de MicroPython.\n"
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "La fréquence de PWM minimale est 1Hz"
@ -2986,9 +3001,45 @@ msgstr "'step' nul"
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Assertion en mode 'soft-device', id: 0x%08lX, pc: 0x%08lX"
 #~ msgid ""
 #~ "The CircuitPython heap was corrupted because the stack was too small.\n"
 #~ "Please increase stack size limits and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ "If you didn't change the stack, then file an issue here with the contents "
 #~ "of your CIRCUITPY drive:\n"
 #~ msgstr ""
 #~ "Le tas (heap) de CircuitPython a été corrompu parce que la pile était "
 #~ "trop petite.\n"
 #~ "Augmentez la limite de taille de la pile et appuyez sur 'reset' (après "
 #~ "avoir éjecté CIRCUITPY).\n"
 #~ "Si vous n'avez pas modifié la pile, merci de remplir un ticket avec le "
 #~ "contenu  de votre lecteur CIRCUITPY :\n"
 #, fuzzy
 #~ msgid ""
 #~ "The microcontroller's power dipped. Please make sure your power supply "
 #~ "provides\n"
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ msgstr ""
 #~ "L'alimentation du microcontroleur a chuté. Merci de vérifier que votre "
 #~ "alimentation fournit\n"
 #~ "suffisamment de puissance pour l'ensemble du circuit et appuyez sur "
 #~ "'reset' (après avoir éjecté CIRCUITPY).\n"
 #~ msgid ""
 #~ "The reset button was pressed while booting CircuitPython. Press again to "
 #~ "exit safe mode.\n"
 #~ msgstr ""
 #~ "Le bouton 'reset' a été appuyé pendant le démarrage de CircuitPython. "
 #~ "Appuyer de nouveau pour quitter de le mode sans-échec.\n"
 #~ msgid "Tile indices must be 0 - 255"
 #~ msgstr "Les indices des tuiles doivent être compris entre 0 et 255 "
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "Pour quitter, redémarrez la carte SVP sans "
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) n'existe pas"
@ -3011,6 +3062,13 @@ msgstr "'step' nul"
 #~ msgid "Voice index too high"
 #~ msgstr "Index de la voix trop grand"
 #, fuzzy
 #~ msgid ""
 #~ "You are running in safe mode which means something unanticipated "
 #~ "happened.\n"
 #~ msgstr ""
 #~ "Vous êtes en mode sans-échec ce qui signifie qu'un imprévu est survenu.\n"
 #~ msgid "bad GATT role"
 #~ msgstr "mauvais rôle GATT"
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  File \"%q\""
@ -295,7 +308,7 @@ msgid "Array values should be single bytes."
 msgstr "Valori di Array dovrebbero essere bytes singulari"
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -408,6 +421,10 @@ msgstr "non si può tirare quando nella modalita output"
 msgid "Cannot get temperature"
 msgstr "Impossibile leggere la temperatura. status: 0x%02x"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Impossibile dare in output entrambi i canal sullo stesso pin"
@ -453,6 +470,16 @@ msgstr "Impossibile scrivere senza pin MOSI."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "CharacteristicBuffer scritura non dato"
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Inizializzazione del pin di clock fallita."
@ -515,7 +542,7 @@ msgid "Couldn't allocate second buffer"
 msgstr "Impossibile allocare il secondo buffer"
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@ -635,28 +662,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "File esistente"
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr "Cancellamento di Flash fallito"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr "Iniziamento di Cancellamento di Flash fallito, err 0x%04x"
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "Impostazione di Flash fallito"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr "Iniziamento di Impostazione di Flash dallito, err 0x%04x"
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -834,13 +851,6 @@ msgstr "Length deve essere un intero"
 msgid "Length must be non-negative"
 msgstr "Length deve essere non negativo"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "inizializzazione del pin MISO fallita."
@ -855,12 +865,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Valore massimo di x quando rispachiato è %d"
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Errore fatale in MicroPython.\n"
+msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@ -929,6 +939,10 @@ msgstr "Non che spazio sul dispositivo"
 msgid "No such file/directory"
 msgstr "Nessun file/directory esistente"
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@ -1123,10 +1137,7 @@ msgstr "Metodi mancanti readinto() o write() allo stream."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
@ -1136,21 +1147,11 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
 #, fuzzy
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 "La potenza del microcontrollore è calata. Assicurati che l'alimentazione sia "
 "attaccata correttamente\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@ -1184,10 +1185,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Per uscire resettare la scheda senza "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@ -1267,6 +1264,10 @@ msgstr "indentazione inaspettata"
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1338,12 +1339,8 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
-#, fuzzy
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgid ""
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 "Sei nella modalità sicura che significa che qualcosa di molto brutto è "
 "successo.\n"
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@ -2862,6 +2859,15 @@ msgstr "zero step"
 #~ msgid "Failed to write gatts value, err 0x%04x"
 #~ msgstr "Impossibile scrivere valore dell'attributo. status: 0x%02x"
 #~ msgid "Flash erase failed"
 #~ msgstr "Cancellamento di Flash fallito"
 #~ msgid "Flash erase failed to start, err 0x%04x"
 #~ msgstr "Iniziamento di Cancellamento di Flash fallito, err 0x%04x"
 #~ msgid "Flash write failed to start, err 0x%04x"
 #~ msgstr "Iniziamento di Impostazione di Flash dallito, err 0x%04x"
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 non supporta pull-up"
@ -2877,6 +2883,9 @@ msgstr "zero step"
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "Frequenza massima su PWM è %dhz"
 #~ msgid "MicroPython fatal error.\n"
 #~ msgstr "Errore fatale in MicroPython.\n"
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "Frequenza minima su PWM è 1hz"
@ -2922,6 +2931,19 @@ msgstr "zero step"
 #~ msgid "STA required"
 #~ msgstr "STA richiesta"
 #, fuzzy
 #~ msgid ""
 #~ "The microcontroller's power dipped. Please make sure your power supply "
 #~ "provides\n"
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ msgstr ""
 #~ "La potenza del microcontrollore è calata. Assicurati che l'alimentazione "
 #~ "sia attaccata correttamente\n"
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "Per uscire resettare la scheda senza "
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) non esistente"
@ -2937,6 +2959,14 @@ msgstr "zero step"
 #~ msgid "Use esptool to erase flash and re-upload Python instead"
 #~ msgstr "Usa esptool per cancellare la flash e ricaricare Python invece"
 #, fuzzy
 #~ msgid ""
 #~ "You are running in safe mode which means something unanticipated "
 #~ "happened.\n"
 #~ msgstr ""
 #~ "Sei nella modalità sicura che significa che qualcosa di molto brutto è "
 #~ "successo.\n"
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[errore addrinfo %d]"
--- a/locale/ko.po
+++ b/locale/ko.po
@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2019-05-06 14:22-0700\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "실행 완료 코드. 재장전 을 기다리는 중입니다\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr " 파일 \"%q\""
@ -294,7 +307,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -404,6 +417,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr "온도 데이터를 수신 할 수 없습니다"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@ -448,6 +465,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@ -509,7 +536,7 @@ msgid "Couldn't allocate second buffer"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@ -625,28 +652,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -819,13 +836,6 @@ msgstr "길이는 정수(int) 여야합니다"
 msgid "Length must be non-negative"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@ -840,11 +850,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
@ -913,6 +923,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@ -1091,10 +1105,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
@ -1105,18 +1116,11 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@ -1149,10 +1153,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@ -1232,6 +1232,10 @@ msgstr ""
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1302,8 +1306,7 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
--- a/locale/pl.po
+++ b/locale/pl.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@ -24,6 +24,19 @@ msgstr ""
 "\n"
 "Kod wykonany. Czekam na przeładowanie.\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Plik \"%q\""
@ -293,8 +306,8 @@ msgid "Array values should be single bytes."
 msgstr "Wartości powinny być bajtami."
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
-msgstr "Próba alokacji pamięci na stercie gdy VM nie działa.\n"
+msgstr ""
 #: main.c
 msgid "Auto-reload is off.\n"
@ -403,6 +416,10 @@ msgstr "Nie ma podciągnięcia w trybie wyjścia"
 msgid "Cannot get temperature"
 msgstr "Nie można odczytać temperatury"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Nie można mieć obu kanałów na tej samej nóżce"
@ -447,6 +464,16 @@ msgstr "Nie można pisać bez nóżki MOSI."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "Pisanie do CharacteristicBuffer niewspierane"
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Nie powiodło się ustawienie nóżki zegara"
@ -508,8 +535,8 @@ msgid "Couldn't allocate second buffer"
 msgstr "Nie udała się alokacja drugiego bufora"
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Katastrofa w HardFault_Handler.\n"
+msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@ -624,28 +651,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Nie udało się zwolnić blokady, błąd 0x%04x"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Plik istnieje"
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr "Nie udało się skasować flash"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr "Nie udało się rozpocząć kasowania flash, błąd 0x%04x"
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "Zapis do flash nie powiódł się"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr "Nie udało się rozpocząć zapisu do flash, błąd 0x%04x"
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr "Uzyskana częstotliwość jest niemożliwa. Spauzowano."
@ -820,17 +837,6 @@ msgstr "Długość musi być całkowita"
 msgid "Length must be non-negative"
 msgstr "Długość musi być nieujemna"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 "Ojej, wygląda na to, że CircuitPython natrafił na poważny problem!\n"
 "Prosimy o zgłoszenie błędu pod adresem https://github.com/adafruit/"
 "circuitpython/issues\n"
 " z zawartością dysku CIRCUITPY oraz tym komunikatem:\n"
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "Nie powiodło się ustawienie nóżki MISO."
@ -845,13 +851,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Największa wartość x przy odwróceniu to %d"
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 "Skok NLR MicroPythona nie powiódł się. Prawdopodobne skażenie pamięci.\n"
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Krytyczny błąd MicroPythona.\n"
+msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@ -919,6 +924,10 @@ msgstr "Brak miejsca"
 msgid "No such file/directory"
 msgstr "Brak pliku/katalogu"
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@ -1097,16 +1106,8 @@ msgstr "Strumień nie ma metod readinto() lub write()."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 "Sterta CircuitPythona jest skażona z powodu zbyt małego stosu.\n"
 "Proszę zwiększyć limity wielkości stosu i nazisnąć reset (po odmontowaniu "
 "CIRCUITPY).\n"
 "Jeśli wielkość stosu nie była zmieniana, proszę zgłosić błąd zawierający "
 "zawartość CIRCUITPY tutaj:\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
@ -1116,22 +1117,10 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 "Zasilanie mikrokontrolera gwałtownie spadło. Proszę upewnić się,\n"
 "że zasilanie jest wystarczające dla całego obwodu in nacisnąć reset (po "
 "odmontowaniu CIRCUITPY).\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 "Przycisk reset został wciśnięty podczas startu CircuitPythona. Wciśnij go "
 "ponownie aby wyjść z trybu bezpieczeństwa.\n"
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@ -1165,10 +1154,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr "Szerokość bitmapy musi być wielokrotnością szerokości kafelka"
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "By wyjść, proszę zresetować płytkę bez "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Zbyt wiele kanałów."
@ -1247,6 +1232,10 @@ msgstr "Nieoczekiwany typ nrfx uuid."
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1320,10 +1309,8 @@ msgstr ""
 "Aby zobaczyć wbudowane moduły, wpisz `help(\"modules\")`.\n"
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 "Uruchomiono w trybie bezpieczeństwa, gdyż nastąpiło coś nieoczekiwanego.\n"
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@ -2660,6 +2647,9 @@ msgstr "zerowy krok"
 #~ msgid "Address is not %d bytes long or is in wrong format"
 #~ msgstr "Adres nie ma długości %d bajtów lub zły format"
 #~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
 #~ msgstr "Próba alokacji pamięci na stercie gdy VM nie działa.\n"
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "Nie można dodać serwisów w trybie Central"
@ -2681,6 +2671,9 @@ msgstr "zerowy krok"
 #~ msgid "Could not decode ble_uuid, err 0x%04x"
 #~ msgstr "Nie można zdekodować ble_uuid, błąd 0x%04x"
 #~ msgid "Crash into the HardFault_Handler.\n"
 #~ msgstr "Katastrofa w HardFault_Handler.\n"
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Zbyt dużo danych pakietu rozgłoszeniowego"
@ -2763,6 +2756,15 @@ msgstr "zerowy krok"
 #~ msgid "Failed to write gatts value, err 0x%04x"
 #~ msgstr "Nie udało się zapisać gatts, błąd 0x%04x"
 #~ msgid "Flash erase failed"
 #~ msgstr "Nie udało się skasować flash"
 #~ msgid "Flash erase failed to start, err 0x%04x"
 #~ msgstr "Nie udało się rozpocząć kasowania flash, błąd 0x%04x"
 #~ msgid "Flash write failed to start, err 0x%04x"
 #~ msgstr "Nie udało się rozpocząć zapisu do flash, błąd 0x%04x"
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Zła nóżka zegara"
@ -2772,6 +2774,23 @@ msgstr "zerowy krok"
 #~ msgid "Invalid data pin"
 #~ msgstr "Zła nóżka danych"
 #~ msgid ""
 #~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 #~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 #~ " with the contents of your CIRCUITPY drive and this message:\n"
 #~ msgstr ""
 #~ "Ojej, wygląda na to, że CircuitPython natrafił na poważny problem!\n"
 #~ "Prosimy o zgłoszenie błędu pod adresem https://github.com/adafruit/"
 #~ "circuitpython/issues\n"
 #~ " z zawartością dysku CIRCUITPY oraz tym komunikatem:\n"
 #~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
 #~ msgstr ""
 #~ "Skok NLR MicroPythona nie powiódł się. Prawdopodobne skażenie pamięci.\n"
 #~ msgid "MicroPython fatal error.\n"
 #~ msgstr "Krytyczny błąd MicroPythona.\n"
 #~ msgid "Must be a Group subclass."
 #~ msgstr "Musi dziedziczyć z Group."
@ -2783,15 +2802,54 @@ msgstr "zerowy krok"
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgid ""
 #~ "The CircuitPython heap was corrupted because the stack was too small.\n"
 #~ "Please increase stack size limits and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ "If you didn't change the stack, then file an issue here with the contents "
 #~ "of your CIRCUITPY drive:\n"
 #~ msgstr ""
 #~ "Sterta CircuitPythona jest skażona z powodu zbyt małego stosu.\n"
 #~ "Proszę zwiększyć limity wielkości stosu i nazisnąć reset (po odmontowaniu "
 #~ "CIRCUITPY).\n"
 #~ "Jeśli wielkość stosu nie była zmieniana, proszę zgłosić błąd zawierający "
 #~ "zawartość CIRCUITPY tutaj:\n"
 #~ msgid ""
 #~ "The microcontroller's power dipped. Please make sure your power supply "
 #~ "provides\n"
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ msgstr ""
 #~ "Zasilanie mikrokontrolera gwałtownie spadło. Proszę upewnić się,\n"
 #~ "że zasilanie jest wystarczające dla całego obwodu in nacisnąć reset (po "
 #~ "odmontowaniu CIRCUITPY).\n"
 #~ msgid ""
 #~ "The reset button was pressed while booting CircuitPython. Press again to "
 #~ "exit safe mode.\n"
 #~ msgstr ""
 #~ "Przycisk reset został wciśnięty podczas startu CircuitPythona. Wciśnij go "
 #~ "ponownie aby wyjść z trybu bezpieczeństwa.\n"
 #~ msgid "Tile indices must be 0 - 255"
 #~ msgstr "Indeks kafelka musi być pomiędzy 0 a 255 włącznie"
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "By wyjść, proszę zresetować płytkę bez "
 #~ msgid "UUID integer value not in range 0 to 0xffff"
 #~ msgstr "Wartość UUID poza zakresem 0 do 0xffff"
 #~ msgid "Voice index too high"
 #~ msgstr "Zbyt wysoki indeks głosu"
 #~ msgid ""
 #~ "You are running in safe mode which means something unanticipated "
 #~ "happened.\n"
 #~ msgstr ""
 #~ "Uruchomiono w trybie bezpieczeństwa, gdyż nastąpiło coś nieoczekiwanego.\n"
 #~ msgid "bad GATT role"
 #~ msgstr "zła rola GATT"
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Arquivo \"%q\""
@ -295,7 +308,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 #: main.c
@ -405,6 +418,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr "Não pode obter a temperatura. status: 0x%02x"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@ -449,6 +466,16 @@ msgstr "Não é possível ler sem um pino MOSI"
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Inicialização do pino de Clock falhou."
@ -511,7 +538,7 @@ msgid "Couldn't allocate second buffer"
 msgstr "Não pôde alocar segundo buffer"
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@ -630,28 +657,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Arquivo já existe"
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@ -827,13 +844,6 @@ msgstr "Tamanho deve ser um int"
 msgid "Length must be non-negative"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "Inicialização do pino MISO falhou"
@ -848,11 +858,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
@ -921,6 +931,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@ -1104,10 +1118,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
@ -1118,18 +1129,11 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@ -1162,10 +1166,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Para sair, por favor, reinicie a placa sem "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Muitos canais na amostra."
@ -1244,6 +1244,10 @@ msgstr ""
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1315,8 +1319,7 @@ msgid ""
 msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
@ -2837,6 +2840,9 @@ msgstr "passo zero"
 #~ msgid "STA required"
 #~ msgstr "STA requerido"
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "Para sair, por favor, reinicie a placa sem "
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) não existe"
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-12-10 13:55-0600\n"
+"POT-Creation-Date: 2019-12-12 15:33-0800\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "Dàimǎ yǐ wánchéng yùnxíng. Zhèngzài děngdài chóngxīn jiāzài.\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Wénjiàn \"%q\""
@ -294,8 +307,8 @@ msgid "Array values should be single bytes."
 msgstr "Shùzǔ zhí yīnggāi shì dāngè zì jié."
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
-msgstr "MicroPython VM wèi yùnxíng shí chángshì duī fēnpèi.\n"
+msgstr ""
 #: main.c
 msgid "Auto-reload is off.\n"
@ -404,6 +417,10 @@ msgstr "Zài shūchū móshì xià wúfǎ huòqǔ lādòng"
 msgid "Cannot get temperature"
 msgstr "Wúfǎ huòqǔ wēndù"
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Wúfǎ shūchū tóng yīgè yǐn jiǎo shàng de liǎng gè píndào"
@ -448,6 +465,16 @@ msgstr "Wúfǎ xiě rù MOSI de yǐn jiǎo."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "Wèi tígōng zìfú huǎncún xiě rù"
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Shízhōng de yǐn jiǎo chūshǐhuà shībài."
@ -509,8 +536,8 @@ msgid "Couldn't allocate second buffer"
 msgstr "Wúfǎ fēnpèi dì èr gè huǎnchōng qū"
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Bēngkuì dào HardFault_Handler.\n"
+msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@ -625,28 +652,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Wúfǎ shìfàng mutex, err 0x%04x"
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
 msgstr ""
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Wénjiàn cúnzài"
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
 msgid "Flash erase failed"
 msgstr "Flash cā chú shībài"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash erase failed to start, err 0x%04x"
 msgstr "Flash cā chú shībài, err 0x%04x"
 #: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "Flash xiě rù shībài"
 #: ports/nrf/peripherals/nrf/nvm.c
 #, c-format
 msgid "Flash write failed to start, err 0x%04x"
 msgstr "Flash xiě rù shībài, err 0x%04x"
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr "Pínlǜ bǔhuò gāo yú nénglì. Bǔhuò zàntíng."
@ -821,17 +838,6 @@ msgstr "Chángdù bìxū shì yīgè zhěngshù"
 msgid "Length must be non-negative"
 msgstr "Chángdù bìxū shìfēi fùshù"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 " with the contents of your CIRCUITPY drive and this message:\n"
 msgstr ""
 "Kàn lái wǒmen de héxīn CircuitPython dàimǎ bēngkuì dé hěn lìhài. Āi yōu!\n"
 "Qǐng zài https://Github.Com/adafruit/circuitpython/issues\n"
 "shàng tíjiāo yīgè wèntí, qízhōng bāohán nín de CIRCUITPY qūdòngqì de nèiróng "
 "hé cǐ xiāoxī:\n"
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "MISO yǐn jiǎo chūshǐhuà shībài."
@ -846,12 +852,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Jìngxiàng shí de zuìdà X zhí wèi%d"
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr "MicroPython NLR tiàoyuè shībài. Kěnéng nèicún fǔbài.\n"
+msgstr ""
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "MicroPython zhìmìng cuòwù.\n"
+msgstr ""
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@ -919,6 +925,10 @@ msgstr "Shèbèi shàng méiyǒu kònggé"
 msgid "No such file/directory"
 msgstr "Méiyǒu cǐ lèi wénjiàn/mùlù"
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@ -1101,16 +1111,8 @@ msgstr "Liú quēshǎo readinto() huò write() fāngfǎ."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
 "CIRCUITPY).\n"
 "If you didn't change the stack, then file an issue here with the contents of "
 "your CIRCUITPY drive:\n"
 msgstr ""
 "Yóuyú duīzhàn tài xiǎo, huánliú Python rè sǔnhuài.\n"
 "Qǐng zēngjiā duīzhàn chǐcùn xiànzhì, ránhòu chóngxīn shèzhì (zài dànchū "
 "CIRCUITPY).\n"
 "Rúguǒ nín méiyǒu gǎibiàn duīzhàn, qǐng zài cǐ chù tíchū yīgè wèntí, bìng zài "
 "rù nín de CIRCUITPY qūdòngqì:\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
@ -1122,22 +1124,10 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 "Wēi kòngzhì qì de diànliàng bèi chōng chū. Qǐng quèbǎo nín de diànyuán wèi\n"
 "zhěnggè diànlù tígōng zúgòu de diànyuán bìng àn xià fùwèi (zài dànchū "
 "CIRCUITPY hòu).\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The reset button was pressed while booting CircuitPython. Press again to "
 "exit safe mode.\n"
 msgstr ""
 "Qǐdòng CircuitPython shí, chóng zhì ànniǔ bèi àn xià. Zàicì àn xià yǐ tuìchū "
 "ānquán móshì\n"
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@ -1171,10 +1161,6 @@ msgstr "Píng pū zhí chāochū fànwéi"
 msgid "Tile width must exactly divide bitmap width"
 msgstr "Píng pū kuāndù bìxū huàfēn wèi tú kuāndù"
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr "Yào tuìchū, qǐng chóng zhì bǎnkuài ér bùyòng "
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Chōuyàng zhōng de píndào tài duō."
@ -1253,6 +1239,10 @@ msgstr "Yìwài de nrfx uuid lèixíng"
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@ -1328,11 +1318,8 @@ msgstr ""
 "Ruò yào liè chū nèizài de mókuài, qǐng qǐng zuò yǐxià `help(\"modules\")`.\n"
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
 "You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 "Nǐ zhèngzài ānquán móshì xià yùnxíng, zhè yì wèi zhuó yìwài fāshēng de "
 "shìqíng.\n"
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@ -2673,6 +2660,9 @@ msgstr "líng bù"
 #~ msgid "Address is not %d bytes long or is in wrong format"
 #~ msgstr "Dìzhǐ bùshì %d zì jié zhǎng, huòzhě géshì cuòwù"
 #~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
 #~ msgstr "MicroPython VM wèi yùnxíng shí chángshì duī fēnpèi.\n"
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "Wúfǎ zài zhōngyāng móshì xià tiānjiā fúwù"
@ -2697,6 +2687,9 @@ msgstr "líng bù"
 #~ msgid "Could not decode ble_uuid, err 0x%04x"
 #~ msgstr "Wúfǎ jiěmǎ kě dú_uuid, err 0x%04x"
 #~ msgid "Crash into the HardFault_Handler.\n"
 #~ msgstr "Bēngkuì dào HardFault_Handler.\n"
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Guǎnggào bāo de shùjù tài dà"
@ -2802,6 +2795,15 @@ msgstr "líng bù"
 #~ msgid "Failed to write gatts value, err 0x%04x"
 #~ msgstr "Xiě rù gatts zhí,err 0x%04x shībài"
 #~ msgid "Flash erase failed"
 #~ msgstr "Flash cā chú shībài"
 #~ msgid "Flash erase failed to start, err 0x%04x"
 #~ msgstr "Flash cā chú shībài, err 0x%04x"
 #~ msgid "Flash write failed to start, err 0x%04x"
 #~ msgstr "Flash xiě rù shībài, err 0x%04x"
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Wúxiào de wèi shízhōng yǐn jiǎo"
@ -2811,6 +2813,22 @@ msgstr "líng bù"
 #~ msgid "Invalid data pin"
 #~ msgstr "Wúxiào de shùjù yǐn jiǎo"
 #~ msgid ""
 #~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
 #~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
 #~ " with the contents of your CIRCUITPY drive and this message:\n"
 #~ msgstr ""
 #~ "Kàn lái wǒmen de héxīn CircuitPython dàimǎ bēngkuì dé hěn lìhài. Āi yōu!\n"
 #~ "Qǐng zài https://Github.Com/adafruit/circuitpython/issues\n"
 #~ "shàng tíjiāo yīgè wèntí, qízhōng bāohán nín de CIRCUITPY qūdòngqì de "
 #~ "nèiróng hé cǐ xiāoxī:\n"
 #~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
 #~ msgstr "MicroPython NLR tiàoyuè shībài. Kěnéng nèicún fǔbài.\n"
 #~ msgid "MicroPython fatal error.\n"
 #~ msgstr "MicroPython zhìmìng cuòwù.\n"
 #~ msgid "Must be a Group subclass."
 #~ msgstr "Bìxū shì fēnzǔ zi lèi."
@ -2835,15 +2853,56 @@ msgstr "líng bù"
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Ruǎn shèbèi wéihù, id: 0X%08lX, pc: 0X%08lX"
 #~ msgid ""
 #~ "The CircuitPython heap was corrupted because the stack was too small.\n"
 #~ "Please increase stack size limits and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ "If you didn't change the stack, then file an issue here with the contents "
 #~ "of your CIRCUITPY drive:\n"
 #~ msgstr ""
 #~ "Yóuyú duīzhàn tài xiǎo, huánliú Python rè sǔnhuài.\n"
 #~ "Qǐng zēngjiā duīzhàn chǐcùn xiànzhì, ránhòu chóngxīn shèzhì (zài dànchū "
 #~ "CIRCUITPY).\n"
 #~ "Rúguǒ nín méiyǒu gǎibiàn duīzhàn, qǐng zài cǐ chù tíchū yīgè wèntí, bìng "
 #~ "zài rù nín de CIRCUITPY qūdòngqì:\n"
 #~ msgid ""
 #~ "The microcontroller's power dipped. Please make sure your power supply "
 #~ "provides\n"
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
 #~ msgstr ""
 #~ "Wēi kòngzhì qì de diànliàng bèi chōng chū. Qǐng quèbǎo nín de diànyuán "
 #~ "wèi\n"
 #~ "zhěnggè diànlù tígōng zúgòu de diànyuán bìng àn xià fùwèi (zài dànchū "
 #~ "CIRCUITPY hòu).\n"
 #~ msgid ""
 #~ "The reset button was pressed while booting CircuitPython. Press again to "
 #~ "exit safe mode.\n"
 #~ msgstr ""
 #~ "Qǐdòng CircuitPython shí, chóng zhì ànniǔ bèi àn xià. Zàicì àn xià yǐ "
 #~ "tuìchū ānquán móshì\n"
 #~ msgid "Tile indices must be 0 - 255"
 #~ msgstr "Píng pū zhǐshù bìxū wèi 0 - 255"
 #~ msgid "To exit, please reset the board without "
 #~ msgstr "Yào tuìchū, qǐng chóng zhì bǎnkuài ér bùyòng "
 #~ msgid "UUID integer value not in range 0 to 0xffff"
 #~ msgstr "UUID zhěngshù zhí bùzài fànwéi 0 zhì 0xffff"
 #~ msgid "Voice index too high"
 #~ msgstr "Yǔyīn suǒyǐn tài gāo"
 #~ msgid ""
 #~ "You are running in safe mode which means something unanticipated "
 #~ "happened.\n"
 #~ msgstr ""
 #~ "Nǐ zhèngzài ānquán móshì xià yùnxíng, zhè yì wèi zhuó yìwài fāshēng de "
 #~ "shìqíng.\n"
 #~ msgid "bad GATT role"
 #~ msgstr "zǒng xiédìng de bùliáng juésè"
--- a/main.c
+++ b/main.c
@ -204,7 +204,7 @@ void cleanup_after_vm(supervisor_allocation* heap) {
 bool run_code_py(safe_mode_t safe_mode) {
    bool serial_connected_at_start = serial_connected();
-    #ifdef CIRCUITPY_AUTORELOAD_DELAY_MS
+    #if CIRCUITPY_AUTORELOAD_DELAY_MS > 0
    if (serial_connected_at_start) {
        serial_write("\n");
        if (autoreload_is_enabled()) {
@ -264,9 +264,7 @@ bool run_code_py(safe_mode_t safe_mode) {
    rgb_status_animation_t animation;
    prep_rgb_status_animation(&result, found_main, safe_mode, &animation);
    while (true) {
-        #ifdef MICROPY_VM_HOOK_LOOP
+        RUN_BACKGROUND_TASKS;
            MICROPY_VM_HOOK_LOOP
        #endif
        if (reload_requested) {
            reload_requested = false;
            return true;
--- a/ports/atmel-samd/Makefile
+++ b/ports/atmel-samd/Makefile
@ -157,7 +157,7 @@ endif
-LDFLAGS = $(CFLAGS) -nostartfiles -fshort-enums -Wl,-nostdlib -Wl,-T,$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs
+LDFLAGS = $(CFLAGS) -nostartfiles -fshort-enums -Wl,-nostdlib -Wl,-T,$(GENERATED_LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs
 LIBS := -lgcc -lc
 # Use toolchain libm if we're not using our own.
@ -301,12 +301,17 @@ SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE))
                             $(addprefix shared-module/, $(SRC_SHARED_MODULE)) \
                             $(addprefix shared-module/, $(SRC_SHARED_MODULE_INTERNAL))
 # There may be duplicates between SRC_COMMON_HAL_EXPANDED and SRC_SHARED_MODULE_EXPANDED,
 # because a few modules have files both in common-hal/ and shared-modules/.
 # Doing a $(sort ...) removes duplicates as part of sorting.
 SRC_COMMON_HAL_SHARED_MODULE_EXPANDED = $(sort $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED))
 SRC_S = supervisor/$(CHIP_FAMILY)_cpu.s
 OBJ = $(PY_O) $(SUPERVISOR_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
 OBJ += $(addprefix $(BUILD)/, $(SRC_ASF:.c=.o))
-OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_EXPANDED:.c=.o))
+OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_SHARED_MODULE_EXPANDED:.c=.o))
 OBJ += $(addprefix $(BUILD)/, $(SRC_SHARED_MODULE_EXPANDED:.c=.o))
 ifeq ($(INTERNAL_LIBM),1)
 OBJ += $(addprefix $(BUILD)/, $(SRC_LIBM:.c=.o))
 endif
@ -319,10 +324,10 @@ SRC_QSTR_PREPROCESSOR += peripherals/samd/$(CHIP_FAMILY)/clocks.c
 all: $(BUILD)/firmware.bin $(BUILD)/firmware.uf2
-$(BUILD)/firmware.elf: $(OBJ)
+$(BUILD)/firmware.elf: $(OBJ) $(GENERATED_LD_FILE)
 	$(STEPECHO) "LINK $@"
-	$(Q)$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group
+	$(Q)$(CC) -o $@ $(LDFLAGS) $(OBJ) -Wl,--start-group $(LIBS) -Wl,--end-group
-	$(Q)$(SIZE) $@ | $(PYTHON3) $(TOP)/tools/build_memory_info.py $(LD_FILE)
+	$(Q)$(SIZE) $@ | $(PYTHON3) $(TOP)/tools/build_memory_info.py $(GENERATED_LD_FILE)
 $(BUILD)/firmware.bin: $(BUILD)/firmware.elf
 	$(STEPECHO) "Create $@"
--- a/ports/atmel-samd/bindings/samd/Clock.c
+++ b/ports/atmel-samd/bindings/samd/Clock.c
@ -163,3 +163,263 @@ const mp_obj_type_t samd_clock_type = {
    .print = samd_clock_print,
    .locals_dict = (mp_obj_t)&samd_clock_locals_dict,
 };
 #ifdef SAMD21
 #ifdef SAMD21_EXPOSE_ALL_CLOCKS
 CLOCK_SOURCE(XOSC);
 CLOCK_SOURCE(GCLKIN);
 CLOCK_SOURCE(GCLKGEN1);
 CLOCK_SOURCE(OSCULP32K);
 #endif
 CLOCK_SOURCE(OSC32K);
 CLOCK_SOURCE(XOSC32K);
 #ifdef SAMD21_EXPOSE_ALL_CLOCKS
 CLOCK_SOURCE(OSC8M);
 CLOCK_SOURCE(DFLL48M);
 CLOCK_SOURCE(DPLL96M);
 CLOCK_GCLK_(SYSCTRL, DFLL48);
 CLOCK_GCLK_(SYSCTRL, FDPLL);
 CLOCK_GCLK_(SYSCTRL, FDPLL32K);
 CLOCK_GCLK(WDT);
 #endif
 CLOCK_GCLK(RTC);
 #ifdef SAMD21_EXPOSE_ALL_CLOCKS
 CLOCK_GCLK(EIC);
 CLOCK_GCLK(USB);
 CLOCK_GCLK_(EVSYS, 0);
 CLOCK_GCLK_(EVSYS, 1);
 CLOCK_GCLK_(EVSYS, 2);
 CLOCK_GCLK_(EVSYS, 3);
 CLOCK_GCLK_(EVSYS, 4);
 CLOCK_GCLK_(EVSYS, 5);
 CLOCK_GCLK_(EVSYS, 6);
 CLOCK_GCLK_(EVSYS, 7);
 CLOCK_GCLK_(EVSYS, 8);
 CLOCK_GCLK_(EVSYS, 9);
 CLOCK_GCLK_(EVSYS, 10);
 CLOCK_GCLK_(EVSYS, 11);
 CLOCK(SERCOMx_SLOW, 1, 19);
 CLOCK_GCLK_(SERCOM0, CORE);
 CLOCK_GCLK_(SERCOM1, CORE);
 CLOCK_GCLK_(SERCOM2, CORE);
 CLOCK_GCLK_(SERCOM3, CORE);
 CLOCK_GCLK_(SERCOM4, CORE);
 CLOCK_GCLK_(SERCOM5, CORE);
 CLOCK(TCC0_TCC1, 1, 26);
 CLOCK(TCC2_TCC3, 1, 27);
 CLOCK(TC4_TC5, 1, 28);
 CLOCK(TC6_TC7, 1, 29);
 CLOCK_GCLK(ADC);
 CLOCK_GCLK_(AC, DIG);
 CLOCK_GCLK_(AC, ANA);
 CLOCK_GCLK(DAC);
 CLOCK_GCLK(PTC);
 CLOCK_GCLK_(I2S, 0);
 CLOCK_GCLK_(I2S, 1);
 CLOCK(SYSTICK, 2, 0);
 #endif
 STATIC const mp_rom_map_elem_t samd_clock_global_dict_table[] = {
 #ifdef SAMD21_EXPOSE_ALL_CLOCKS
    CLOCK_ENTRY(XOSC),
    CLOCK_ENTRY(GCLKIN),
    CLOCK_ENTRY(GCLKGEN1),
    CLOCK_ENTRY(OSCULP32K),
 #endif
    CLOCK_ENTRY(OSC32K),
    CLOCK_ENTRY(XOSC32K),
 #ifdef SAMD21_EXPOSE_ALL_CLOCKS
    CLOCK_ENTRY(OSC8M),
    CLOCK_ENTRY(DFLL48M),
    CLOCK_ENTRY(DPLL96M),
    CLOCK_ENTRY_(SYSCTRL, DFLL48),
    CLOCK_ENTRY_(SYSCTRL, FDPLL),
    CLOCK_ENTRY_(SYSCTRL, FDPLL32K),
    CLOCK_ENTRY(WDT),
 #endif
    CLOCK_ENTRY(RTC),
 #ifdef SAMD21_EXPOSE_ALL_CLOCKS
    CLOCK_ENTRY(EIC),
    CLOCK_ENTRY(USB),
    CLOCK_ENTRY_(EVSYS, 0),
    CLOCK_ENTRY_(EVSYS, 1),
    CLOCK_ENTRY_(EVSYS, 2),
    CLOCK_ENTRY_(EVSYS, 3),
    CLOCK_ENTRY_(EVSYS, 4),
    CLOCK_ENTRY_(EVSYS, 5),
    CLOCK_ENTRY_(EVSYS, 6),
    CLOCK_ENTRY_(EVSYS, 7),
    CLOCK_ENTRY_(EVSYS, 8),
    CLOCK_ENTRY_(EVSYS, 9),
    CLOCK_ENTRY_(EVSYS, 10),
    CLOCK_ENTRY_(EVSYS, 11),
    CLOCK_ENTRY(SERCOMx_SLOW),
    CLOCK_ENTRY_(SERCOM0, CORE),
    CLOCK_ENTRY_(SERCOM1, CORE),
    CLOCK_ENTRY_(SERCOM2, CORE),
    CLOCK_ENTRY_(SERCOM3, CORE),
    CLOCK_ENTRY_(SERCOM4, CORE),
    CLOCK_ENTRY_(SERCOM5, CORE),
    CLOCK_ENTRY(TCC0_TCC1),
    CLOCK_ENTRY(TCC2_TCC3),
    CLOCK_ENTRY(TC4_TC5),
    CLOCK_ENTRY(TC6_TC7),
    CLOCK_ENTRY(ADC),
    CLOCK_ENTRY_(AC, DIG),
    CLOCK_ENTRY_(AC, ANA),
    CLOCK_ENTRY(DAC),
    CLOCK_ENTRY(PTC),
    CLOCK_ENTRY_(I2S, 0),
    CLOCK_ENTRY_(I2S, 1),
    CLOCK_ENTRY(SYSTICK),
 #endif
 };
 MP_DEFINE_CONST_DICT(samd_clock_globals, samd_clock_global_dict_table);
 #endif // SAMD21
 #ifdef SAMD51
 #include <instance/can0.h>
 #include <instance/can1.h>
 #include <instance/i2s.h>
 #include <instance/sdhc1.h>
 #include <instance/sercom6.h>
 #include <instance/sercom7.h>
 #include <instance/tcc4.h>
 CLOCK_SOURCE(XOSC0);
 CLOCK_SOURCE(XOSC1);
 CLOCK_SOURCE(GCLKIN);
 CLOCK_SOURCE(GCLKGEN1);
 CLOCK_SOURCE(OSCULP32K);
 CLOCK_SOURCE(XOSC32K);
 CLOCK_SOURCE(DFLL);
 CLOCK_SOURCE(DPLL0);
 CLOCK_SOURCE(DPLL1);
 CLOCK_GCLK_(OSCCTRL, DFLL48);
 CLOCK_GCLK_(OSCCTRL, FDPLL0);
 CLOCK_GCLK_(OSCCTRL, FDPLL1);
 CLOCK_GCLK_(OSCCTRL, FDPLL032K); // GCLK_OSCCTRL_FDPLL1_32K, GCLK_SDHC0_SLOW, GCLK_SDHC1_SLOW, GCLK_SERCOM[0..7]_SLOW
 CLOCK_GCLK(EIC);
 CLOCK_GCLK_(FREQM, MSR);
 // 6: GCLK_FREQM_REF
 CLOCK_GCLK_(SERCOM0, CORE);
 CLOCK_GCLK_(SERCOM1, CORE);
 CLOCK(TC0_TC1, 1, 9);
 CLOCK_GCLK(USB);
 CLOCK_GCLK_(EVSYS, 0);
 CLOCK_GCLK_(EVSYS, 1);
 CLOCK_GCLK_(EVSYS, 2);
 CLOCK_GCLK_(EVSYS, 3);
 CLOCK_GCLK_(EVSYS, 4);
 CLOCK_GCLK_(EVSYS, 5);
 CLOCK_GCLK_(EVSYS, 6);
 CLOCK_GCLK_(EVSYS, 7);
 CLOCK_GCLK_(EVSYS, 8);
 CLOCK_GCLK_(EVSYS, 9);
 CLOCK_GCLK_(EVSYS, 10);
 CLOCK_GCLK_(EVSYS, 11);
 CLOCK_GCLK_(SERCOM2, CORE);
 CLOCK_GCLK_(SERCOM3, CORE);
 CLOCK(TCC0_TCC1, 1, 25);
 CLOCK(TC2_TC3, 1, 26);
 CLOCK_GCLK(CAN0);
 CLOCK_GCLK(CAN1);
 CLOCK(TCC2_TCC3, 1, 29);
 CLOCK(TC4_TC5, 1, 30);
 // CLOCK_GCLK(PDEC);
 // CLOCK_GCLK(AC);
 // CLOCK_GCLK(CCL);
 CLOCK_GCLK_(SERCOM4, CORE);
 CLOCK_GCLK_(SERCOM5, CORE);
 CLOCK_GCLK_(SERCOM6, CORE);
 CLOCK_GCLK_(SERCOM7, CORE);
 CLOCK_GCLK(TCC4);
 CLOCK(TC6_TC7, 1, 39);
 CLOCK_GCLK(ADC0);
 CLOCK_GCLK(ADC1);
 CLOCK_GCLK(DAC);
 CLOCK_GCLK_(I2S, 0);
 CLOCK_GCLK_(I2S, 1);
 // CLOCK_GCLK(SDHC0);
 // CLOCK_GCLK(SDHC1);
 // 47: GCLK_CM4_TRACE
 CLOCK(SYSTICK, 2, 0);
 CLOCK(CPU, 2, 1);
 CLOCK(RTC, 2, 2);
 STATIC const mp_rom_map_elem_t samd_clock_global_dict_table[] = {
    CLOCK_ENTRY(XOSC0),
    CLOCK_ENTRY(XOSC1),
    CLOCK_ENTRY(GCLKIN),
    CLOCK_ENTRY(GCLKGEN1),
    CLOCK_ENTRY(OSCULP32K),
    CLOCK_ENTRY(XOSC32K),
    CLOCK_ENTRY(DFLL),
    CLOCK_ENTRY(DPLL0),
    CLOCK_ENTRY(DPLL1),
    CLOCK_ENTRY_(OSCCTRL, DFLL48),
    CLOCK_ENTRY_(OSCCTRL, FDPLL0),
    CLOCK_ENTRY_(OSCCTRL, FDPLL1),
    CLOCK_ENTRY_(OSCCTRL, FDPLL032K),
    CLOCK_ENTRY(EIC),
    CLOCK_ENTRY_(FREQM, MSR),
    CLOCK_ENTRY_(SERCOM0, CORE),
    CLOCK_ENTRY_(SERCOM1, CORE),
    CLOCK_ENTRY(TC0_TC1),
    CLOCK_ENTRY(USB),
    CLOCK_ENTRY_(EVSYS, 0),
    CLOCK_ENTRY_(EVSYS, 1),
    CLOCK_ENTRY_(EVSYS, 2),
    CLOCK_ENTRY_(EVSYS, 3),
    CLOCK_ENTRY_(EVSYS, 4),
    CLOCK_ENTRY_(EVSYS, 5),
    CLOCK_ENTRY_(EVSYS, 6),
    CLOCK_ENTRY_(EVSYS, 7),
    CLOCK_ENTRY_(EVSYS, 8),
    CLOCK_ENTRY_(EVSYS, 9),
    CLOCK_ENTRY_(EVSYS, 10),
    CLOCK_ENTRY_(EVSYS, 11),
    CLOCK_ENTRY_(SERCOM2, CORE),
    CLOCK_ENTRY_(SERCOM3, CORE),
    CLOCK_ENTRY(TCC0_TCC1),
    CLOCK_ENTRY(TC2_TC3),
    CLOCK_ENTRY(CAN0),
    CLOCK_ENTRY(CAN1),
    CLOCK_ENTRY(TCC2_TCC3),
    CLOCK_ENTRY(TC4_TC5),
    // CLOCK_ENTRY(PDEC),
    // CLOCK_ENTRY(AC),
    // CLOCK_ENTRY(CCL),
    CLOCK_ENTRY_(SERCOM4, CORE),
    CLOCK_ENTRY_(SERCOM5, CORE),
    CLOCK_ENTRY_(SERCOM6, CORE),
    CLOCK_ENTRY_(SERCOM7, CORE),
    CLOCK_ENTRY(TCC4),
    CLOCK_ENTRY(TC6_TC7),
    CLOCK_ENTRY(ADC0),
    CLOCK_ENTRY(ADC1),
    CLOCK_ENTRY(DAC),
    CLOCK_ENTRY_(I2S, 0),
    CLOCK_ENTRY_(I2S, 1),
    // CLOCK_ENTRY(SDHC0),
    // CLOCK_ENTRY(SDHC1),
    CLOCK_ENTRY(SYSTICK),
    CLOCK_ENTRY(CPU),
    CLOCK_ENTRY(RTC),
 };
 MP_DEFINE_CONST_DICT(samd_clock_globals, samd_clock_global_dict_table);
 #endif // SAMD51
--- a/ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.h
+++ b/ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.h
@ -7,10 +7,6 @@
 #define MICROPY_HW_LED_STATUS   (&pin_PB23)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA09)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA08)
--- a/ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x2341
 USB_PID = 0x8053
 USB_PRODUCT = "Arduino MKR1300"
--- a/ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.h
+++ b/ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.h
@ -5,10 +5,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA09)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA08)
--- a/ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x239A
 USB_PID = 0x8050
 USB_PRODUCT = "Arduino MKRZero"
--- a/ports/atmel-samd/boards/arduino_zero/mpconfigboard.h
+++ b/ports/atmel-samd/boards/arduino_zero/mpconfigboard.h
@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (PORT_PB03)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x2341
 USB_PID = 0x824D
 USB_PRODUCT = "Arduino Zero"
--- a/ports/atmel-samd/boards/bast_pro_mini_m0/mpconfigboard.h
+++ b/ports/atmel-samd/boards/bast_pro_mini_m0/mpconfigboard.h
@ -5,6 +5,7 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 // No microcontroller.nvm
 #define CIRCUITPY_INTERNAL_NVM_SIZE 0
 #define DEFAULT_I2C_BUS_SCL (&pin_PA08)
@ -17,8 +18,6 @@
 #define DEFAULT_UART_BUS_RX (&pin_PA01)
 #define DEFAULT_UART_BUS_TX (&pin_PA00)
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000)
 #define IGNORE_PIN_PA03     1
 #define IGNORE_PIN_PA12     1
 #define IGNORE_PIN_PA13     1
--- a/ports/atmel-samd/boards/bast_pro_mini_m0/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/bast_pro_mini_m0/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x1209
 USB_PID = 0xBAB3
 USB_PRODUCT = "Bast Pro Mini M0"
--- a/ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.h
+++ b/ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.h
@ -3,7 +3,6 @@
 #define CIRCUITPY_MCU_FAMILY samd51
 #define MICROPY_HW_LED_STATUS   (&pin_PA22)
 // These are pins not to reset.
@ -14,14 +13,6 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 #define AUTORESET_DELAY_MS 500
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd51x19-bootloader-external-flash.ld
 USB_VID = 0x04D8
 USB_PID = 0xEDB3
 USB_PRODUCT = "Programmable USB Hub"
--- a/ports/atmel-samd/boards/catwan_usbstick/mpconfigboard.h
+++ b/ports/atmel-samd/boards/catwan_usbstick/mpconfigboard.h
@ -7,14 +7,10 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define DEFAULT_SPI_BUS_SCK (&pin_PA19)
 #define DEFAULT_SPI_BUS_MOSI (&pin_PA18)
 #define DEFAULT_SPI_BUS_MISO (&pin_PA22)
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define IGNORE_PIN_PA00     1
 #define IGNORE_PIN_PA01     1
 #define IGNORE_PIN_PA02     1
--- a/ports/atmel-samd/boards/catwan_usbstick/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/catwan_usbstick/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x1209
 USB_PID = 0xBAB2
 USB_PRODUCT = "CatWAN USBStick"
--- a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
@ -22,17 +22,14 @@
 #define SPEAKER_ENABLE_PIN    (&pin_PA30)
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define CALIBRATE_CRYSTALLESS 1
 // Explanation of how a user got into safe mode.
 #define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up"
 // Increase stack size slightly due to CPX library import nesting
 #define CIRCUITPY_DEFAULT_STACK_SIZE  (4504)
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)
 #define DEFAULT_I2C_BUS_SDA (&pin_PB02)
--- a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
 USB_VID = 0x239A
 USB_PID = 0x8019
 USB_PRODUCT = "CircuitPlayground Express"
--- a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+++ b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
@ -22,17 +22,14 @@
 #define SPEAKER_ENABLE_PIN    (&pin_PA30)
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define CALIBRATE_CRYSTALLESS 1
 // Explanation of how a user got into safe mode.
 #define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up"
 // Increase stack size slightly due to CPX library import nesting
 #define CIRCUITPY_DEFAULT_STACK_SIZE  (4504)
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)
 #define DEFAULT_I2C_BUS_SDA (&pin_PB02)
--- a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
 USB_VID = 0x239A
 USB_PID = 0x8019
 USB_PRODUCT = "CircuitPlayground Express with Crickit libraries"
@ -14,9 +13,10 @@ EXTERNAL_FLASH_DEVICES = "S25FL216K, GD25Q16C"
 # Turn off features and optimizations for Crickit build to make room for additional frozen libs.
 LONGINT_IMPL = NONE
 CIRCUITPY_DISPLAYIO = 0
 CIRCUITPY_PIXELBUF = 0
 CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_GAMEPAD = 0
 CIRCUITPY_I2CSLAVE = 0
 CIRCUITPY_PIXELBUF = 0
 SUPEROPT_GC = 0
 CFLAGS_INLINE_LIMIT = 55
--- a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+++ b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
@ -22,17 +22,14 @@
 #define SPEAKER_ENABLE_PIN    (&pin_PA30)
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define CALIBRATE_CRYSTALLESS 1
 // Explanation of how a user got into safe mode.
 #define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up"
 // Increase stack size slightly due to CPX library import nesting.
 #define CIRCUITPY_DEFAULT_STACK_SIZE  (4504)  // divisible by 8
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)
 #define DEFAULT_I2C_BUS_SDA (&pin_PB02)
@ -46,3 +43,5 @@
 // USB is always used internally so skip the pin objects for it.
 #define IGNORE_PIN_PA24     1
 #define IGNORE_PIN_PA25     1
 #define MICROPY_PY_URE 0
--- a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
 USB_VID = 0x239A
 USB_PID = 0x8019
 USB_PRODUCT = "CircuitPlayground Express with displayio"
--- a/ports/atmel-samd/boards/samd21x18-bootloader-crystalless.ld
+++ b/ports/atmel-samd/boards/samd21x18-bootloader-crystalless.ld
@ -1,13 +1,16 @@
-/*
+/* Template for SAMD21/SAMD51 linking. dollar-sign-curly-bracket items are replaced with strings. */
    GNU linker script for SAMD21x18 (256K flash, 32K RAM)
 */
 /* Specify the memory areas */
 MEMORY
 {
-    /* Leave 8KiB for the bootloader, 256b for persistent config (clock), 64k for the flash file system and 256b for the user config. */
+    FLASH_BOOTLOADER (rx): ORIGIN = ${BOOTLOADER_START_ADDR}, LENGTH = ${BOOTLOADER_SIZE}
-    FLASH (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 256K - 8K - 256 - 64K - 256
+
-    RAM (xrw)  : ORIGIN = 0x20000000, LENGTH = 32K
+    FLASH_FIRMWARE (rx) : ORIGIN = ${CIRCUITPY_FIRMWARE_START_ADDR}, LENGTH = ${CIRCUITPY_FIRMWARE_SIZE}
    FLASH_FILESYSTEM (r) : ORIGIN = ${CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_START_ADDR}, LENGTH = ${CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE}
    FLASH_CONFIG (r) : ORIGIN = ${CIRCUITPY_INTERNAL_CONFIG_START_ADDR}, LENGTH = ${CIRCUITPY_INTERNAL_CONFIG_SIZE}
    FLASH_NVM (r) : ORIGIN = ${CIRCUITPY_INTERNAL_NVM_START_ADDR}, LENGTH = ${CIRCUITPY_INTERNAL_NVM_SIZE}
    RAM (xrw)  : ORIGIN = 0x20000000, LENGTH = ${RAM_SIZE}
 }
 /* top end of the stack */
@ -30,7 +33,7 @@ SECTIONS
        *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
        . = ALIGN(4);
-    } >FLASH
+    } >FLASH_FIRMWARE
    .ARM.exidx :
    {
@ -38,12 +41,12 @@ SECTIONS
        *(.gnu.linkonce.armexidx.*)
        _etext = .;        /* define a global symbol at end of code */
        _sidata = .;       /* start of .data section */
-    } > FLASH
+    } >FLASH_FIRMWARE
    /* This is the initialized data section
    The program executes knowing that the data is in the RAM
-    but the loader puts the initial values in the FLASH (inidata).
+    but the loader puts the initial values in the FLASH_FIRMWARE (inidata).
-    It is one task of the startup to copy the initial values from FLASH to RAM. */
+    It is one task of the startup to copy the initial values from FLASH_FIRMWARE to RAM. */
    .data : AT ( _sidata )
    {
        . = ALIGN(4);
@ -72,11 +75,11 @@ SECTIONS
        _ebss = .;
    } >RAM
-    /* this just checks there is enough RAM for a minimal stack */
+    /* this just checks there is enough RAM for the requested stack. */
    .stack :
    {
        . = ALIGN(4);
-        . = . + 2K; /* Reserve a minimum of 2K for the stack. */
+        . = . + ${CIRCUITPY_DEFAULT_STACK_SIZE};
        . = ALIGN(4);
    } >RAM
--- a/ports/atmel-samd/boards/cp32-m4/mpconfigboard.h
+++ b/ports/atmel-samd/boards/cp32-m4/mpconfigboard.h
@ -12,14 +12,6 @@
 #define MICROPY_PORT_C        (0)
 #define MICROPY_PORT_D        (0)
 #define AUTORESET_DELAY_MS 500
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PB09)
 #define DEFAULT_I2C_BUS_SDA (&pin_PB08)
--- a/ports/atmel-samd/boards/cp32-m4/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/cp32-m4/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd51x20-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8021
 USB_PRODUCT = "CP32-M4"
--- a/ports/atmel-samd/boards/datalore_ip_m4/mpconfigboard.h
+++ b/ports/atmel-samd/boards/datalore_ip_m4/mpconfigboard.h
@ -20,14 +20,6 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 #define AUTORESET_DELAY_MS 500
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define BOARD_HAS_CRYSTAL 1
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)
--- a/ports/atmel-samd/boards/datalore_ip_m4/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/datalore_ip_m4/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd51x19-bootloader-external-flash.ld
 USB_VID = 0x4097
 USB_PID = 0x0001
 USB_PRODUCT = "Datalore IP M4"
--- a/ports/atmel-samd/boards/datum_distance/mpconfigboard.h
+++ b/ports/atmel-samd/boards/datum_distance/mpconfigboard.h
@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/datum_distance/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/datum_distance/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xEE8C
 USB_PRODUCT = "datum-Distance"
--- a/ports/atmel-samd/boards/datum_imu/mpconfigboard.h
+++ b/ports/atmel-samd/boards/datum_imu/mpconfigboard.h
@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/datum_imu/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/datum_imu/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xEE8D
 USB_PRODUCT = "datum-IMU"
--- a/ports/atmel-samd/boards/datum_light/mpconfigboard.h
+++ b/ports/atmel-samd/boards/datum_light/mpconfigboard.h
@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/datum_light/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/datum_light/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xEE8E
 USB_PRODUCT = "datum-Light"
--- a/ports/atmel-samd/boards/datum_weather/mpconfigboard.h
+++ b/ports/atmel-samd/boards/datum_weather/mpconfigboard.h
@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/datum_weather/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/datum_weather/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xEE8F
 USB_PRODUCT = "datum-Weather"
--- a/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+++ b/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
@ -8,12 +8,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define CALIBRATE_CRYSTALLESS 1
 // Explanation of how a user got into safe mode.
--- a/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x1209
 USB_PID = 0xBAB6
 USB_PRODUCT = "Escornabot Makech"
--- a/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.h
@ -8,10 +8,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA22)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA23)
--- a/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x239A
 USB_PID = 0x8015
 USB_PRODUCT = "Feather M0 Adalogger"
--- a/ports/atmel-samd/boards/feather_m0_basic/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_m0_basic/mpconfigboard.h
@ -8,10 +8,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/feather_m0_basic/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_m0_basic/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x239A
 USB_PID = 0x8015
 USB_PRODUCT = "Feather M0"
--- a/ports/atmel-samd/boards/feather_m0_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_m0_express/mpconfigboard.h
@ -15,13 +15,6 @@
 #define MICROPY_PORT_B        ( 0 )
 #define MICROPY_PORT_C        ( 0 )
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define BOARD_HAS_CRYSTAL 1
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
--- a/ports/atmel-samd/boards/feather_m0_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_m0_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8023
 USB_PRODUCT = "Feather M0 Express"
--- a/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.h
@ -15,12 +15,6 @@
 #define MICROPY_PORT_B        ( 0 )
 #define MICROPY_PORT_C        ( 0 )
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define BOARD_HAS_CRYSTAL 1
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
--- a/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8023
 USB_PRODUCT = "Feather M0 Express"
--- a/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.h
@ -8,10 +8,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x239A
 USB_PID = 0x8015
 USB_PRODUCT = "Feather M0 RFM69"
--- a/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.h
@ -8,10 +8,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x239A
 USB_PID = 0x8015
 USB_PRODUCT = "Feather M0 RFM9x"
--- a/ports/atmel-samd/boards/feather_m0_supersized/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_m0_supersized/mpconfigboard.h
@ -17,12 +17,6 @@
 #define MICROPY_PORT_B        ( 0 )
 #define MICROPY_PORT_C        ( 0 )
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/feather_m0_supersized/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_m0_supersized/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8023
 USB_PRODUCT = "Feather M0 Supersized"
--- a/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h
@ -16,14 +16,6 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 #define AUTORESET_DELAY_MS 500
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define EXTERNAL_FLASH_QSPI_DUAL
 #define BOARD_HAS_CRYSTAL 1
--- a/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd51x19-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8026
 USB_PRODUCT = "Feather M4 Express"
--- a/ports/atmel-samd/boards/feather_radiofruit_zigbee/mpconfigboard.h
+++ b/ports/atmel-samd/boards/feather_radiofruit_zigbee/mpconfigboard.h
@ -14,12 +14,6 @@
 #define MICROPY_PORT_B        ( 0 )
 #define MICROPY_PORT_C        ( 0 )
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define BOARD_HAS_CRYSTAL 1
 #define DEFAULT_I2C_BUS_SCL (&pin_PA13)
--- a/ports/atmel-samd/boards/feather_radiofruit_zigbee/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/feather_radiofruit_zigbee/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8023
 USB_PRODUCT = "Feather RadioFruit Zigbee"
--- a/ports/atmel-samd/boards/gemma_m0/mpconfigboard.h
+++ b/ports/atmel-samd/boards/gemma_m0/mpconfigboard.h
@ -10,16 +10,12 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define DEFAULT_I2C_BUS_SCL (&pin_PA05)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA04)
 #define DEFAULT_UART_BUS_RX (&pin_PA05)
 #define DEFAULT_UART_BUS_TX (&pin_PA04)
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define IGNORE_PIN_PA03     1
 #define IGNORE_PIN_PA06     1
 #define IGNORE_PIN_PA07     1
--- a/ports/atmel-samd/boards/gemma_m0/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/gemma_m0/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x239A
 USB_PID = 0x801D
 USB_PRODUCT = "Gemma M0"
--- a/ports/atmel-samd/boards/grandcentral_m4_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/grandcentral_m4_express/mpconfigboard.h
@ -21,14 +21,6 @@
 #define MICROPY_PORT_C ( PORT_PC24 | PORT_PC30 | PORT_PC31 )
 #define MICROPY_PORT_D (0)
 #define AUTORESET_DELAY_MS 500
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define BOARD_HAS_CRYSTAL 1
 #define DEFAULT_I2C_BUS_SCL (&pin_PB21)
--- a/ports/atmel-samd/boards/grandcentral_m4_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/grandcentral_m4_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd51x20-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8032
 USB_PRODUCT = "Grand Central M4 Express"
--- a/ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.h
@ -16,12 +16,6 @@
 #define MICROPY_PORT_B        ( PORT_PB22 | PORT_PB23 )
 #define MICROPY_PORT_C        ( 0 )
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA17)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA16)
--- a/ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0xD1ED
 USB_PRODUCT = "HalloWing M0 Express"
--- a/ports/atmel-samd/boards/hallowing_m4_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/hallowing_m4_express/mpconfigboard.h
@ -16,14 +16,6 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 #define AUTORESET_DELAY_MS 500
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA13)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA12)
--- a/ports/atmel-samd/boards/hallowing_m4_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/hallowing_m4_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd51x19-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x804A
 USB_PRODUCT = "Hallowing M4 Express"
--- a/ports/atmel-samd/boards/itsybitsy_m0_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/itsybitsy_m0_express/mpconfigboard.h
@ -16,12 +16,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
--- a/ports/atmel-samd/boards/itsybitsy_m0_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/itsybitsy_m0_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
 USB_VID = 0x239A
 USB_PID = 0x8012
 USB_PRODUCT = "ItsyBitsy M0 Express"
@ -21,4 +20,3 @@ CIRCUITPY_RTC = 0
 CFLAGS_INLINE_LIMIT = 60
 SUPEROPT_GC = 0
--- a/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.h
@ -17,14 +17,6 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 #define AUTORESET_DELAY_MS 500
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define DEFAULT_I2C_BUS_SCL (&pin_PA13)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA12)
--- a/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd51x19-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x802C
 USB_PRODUCT = "ItsyBitsy M4 Express"
--- a/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.h
+++ b/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.h
@ -10,12 +10,8 @@
 #define MICROPY_PORT_C        (0)
 #define MICROPY_PORT_D 		  (0)
 #define CALIBRATE_CRYSTALLESS 1
 #define CIRCUITPY_INTERNAL_NVM_SIZE 0
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - 0x010000)
 #define DEFAULT_I2C_BUS_SCL  (&pin_PA17)
 #define DEFAULT_I2C_BUS_SDA  (&pin_PA16)
--- a/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd51x19-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xED94
 USB_PRODUCT = "kicksat-sprite"
@ -7,7 +6,6 @@ USB_MANUFACTURER = "maholli"
 CHIP_VARIANT = SAMD51G19A
 CHIP_FAMILY = samd51
 QSPI_FLASH_FILESYSTEM = 0
 INTERNAL_FLASH_FILESYSTEM = 1
 LONGINT_IMPL = MPZ
--- a/ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+++ b/ports/atmel-samd/boards/meowmeow/mpconfigboard.h
@ -8,12 +8,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define CALIBRATE_CRYSTALLESS 1
 // Explanation of how a user got into safe mode.
--- a/ports/atmel-samd/boards/meowmeow/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/meowmeow/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x1209
 USB_PID = 0xBAB1
 USB_PRODUCT = "Meow Meow"
--- a/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h
+++ b/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.h
@ -21,12 +21,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code.
 #define CIRCUITPY_INTERNAL_NVM_SIZE 256
 #define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define BOARD_HAS_CRYSTAL 1
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
--- a/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/metro_m0_express/mpconfigboard.mk
@ -1,4 +1,3 @@
 LD_FILE = boards/samd21x18-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8014
 USB_PRODUCT = "Metro M0 Express"
--- a/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.h
+++ b/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.h
@ -18,14 +18,6 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 #define AUTORESET_DELAY_MS 500
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
 #define BOARD_HAS_CRYSTAL 1
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)
--- a/Show More
+++ b/Show More
		`@ -1 +1 @@`
			`Subproject commit 52d87bd7e571af66ecb57ee32b5af92531134150`				`Subproject commit 2000ae3a7c5d60b850c9546a16425aee279e2a36`
		`@ -1 +1 @@`
			`Subproject commit d87ea261c40ecbc6d893d72d337beefbea1cf932`				`Subproject commit 82ba9e40dfff41fdc0541636afde4936c930d86c`
		`@ -1 +1 @@`
			`Subproject commit a6100fb5d867c7f4980f071119bfa7e0a76e1d47`				`Subproject commit 5534662902a223ac8562e6f999d6359e4c17dab1`
		`@ -1 +1 @@`
			`Subproject commit 409e90902ac49720c4add985e8e1a1660bbe63a0`				`Subproject commit 01e89a8437c78b62d4d655c745ded57e26dc747a`
		`@ -1 +1 @@`
			`Subproject commit 89faee0eb08a6855e14f117c514fecf2dd90769d`				`Subproject commit a23b80569f23ef109667dd8c595d319e8a30d620`
		`@ -1 +1 @@`
			`Subproject commit ddc74844983b35b027bd45091c7b8bb3c8d7a2d1`				`Subproject commit f69fc9b47fa25ba1414eb3d5c82f05013280c0d2`
		`@ -1 +1 @@`
			`Subproject commit c0bdd8b10383725ee9293f5d88fb8d47eb1272bd`				`Subproject commit ff99d55115f81899902c2c4a84fdfbea9ae83823`
		`@ -0,0 +1 @@`
							`Subproject commit dd0fe8530a2dcc64ac95bb3e116af2158dcd7cd2`
		`@ -1 +1 @@`
			`Subproject commit 2a3cc7873b5c642d4bb60043dc14d2555e3377a5`				`Subproject commit c3c664bf4db6a36d11808dfcbb5dbf7cff1715b8`