Merge branch 'adafruit:main' into settings-toml-pystack

.github/actions/deps/external/action.yml

@@ -1,6 +1,14 @@
 name: Fetch external deps
 
 inputs:
+  action:
+    required: false
+    default: restore
+    type: choice
+    options:
+    - cache
+    - restore
+
   platform:
     required: false
     default: none
@@ -78,7 +86,7 @@ runs:
       if: inputs.platform != 'esp'
       uses: ./.github/actions/deps/python
       with:
-        action: ${{ fromJSON('["restore", "cache"]')[github.job == 'scheduler'] }}
+        action: ${{ inputs.action }}
     - name: Install python dependencies
       run: pip install -r requirements-dev.txt
       shell: bash

.github/actions/upload_aws/action.yml

@@ -24,7 +24,8 @@ runs:
         (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested'))
       run: >-
         [ -z "$AWS_ACCESS_KEY_ID" ] ||
-        aws s3 cp ${{ inputs.source }} s3://adafruit-circuit-python/bin/${{ inputs.destination }} --recursive --no-progress --region us-east-1
+        aws s3 cp ${{ inputs.source }} s3://adafruit-circuit-python/bin/${{ inputs.destination }}
+        ${{ endsWith(inputs.source, '/') && '--recursive' || '' }} --no-progress --region us-east-1
       env:
         AWS_PAGER: ''
         AWS_ACCESS_KEY_ID: ${{ inputs.AWS_ACCESS_KEY_ID }}

.github/workflows/build-boards-custom.yml

@@ -0,0 +1,104 @@
+name: Custom board build
+
+on:
+  workflow_dispatch:
+    inputs:
+      board:
+        description: 'Board: Found in ports/*/boards/[board_id]'
+        required: true
+        type: string
+      version:
+        description: 'Version: Can be a tag or a commit (>=8.1.0)'
+        required: false
+        default: latest
+        type: string
+      language:
+        description: 'Language: Found in locale/[language].po'
+        required: false
+        default: en_US
+        type: string
+      flags:
+        description: 'Flags: Build flags (e.g. CIRCUITPY_WIFI=1)'
+        required: false
+        type: string
+      debug:
+        description: 'Make a debug build'
+        required: false
+        default: false
+        type: boolean
+
+run-name: ${{ inputs.board }}-${{ inputs.language }}-${{ inputs.version }}${{ inputs.flags != '' && '-custom' || '' }}${{ inputs.debug && '-debug' || '' }}
+
+jobs:
+  build:
+    runs-on: ubuntu-22.04
+    env:
+      PLATFORM_atmel-samd: arm
+      PLATFORM_broadcom: aarch
+      PLATFORM_cxd56: arm
+      PLATFORM_espressif: esp
+      PLATFORM_litex: riscv
+      PLATFORM_mimxrt10xx: arm
+      PLATFORM_nrf: arm
+      PLATFORM_raspberrypi: arm
+      PLATFORM_stm: arm
+    steps:
+    - name: Set up repository
+      run: |
+        git clone --filter=tree:0 https://github.com/adafruit/circuitpython.git $GITHUB_WORKSPACE
+        git checkout ${{ inputs.version == 'latest' && 'HEAD' || inputs.version }}
+    - name: Set up identifier
+      if: inputs.debug || inputs.flags != ''
+      run: |
+        > custom-build && git add custom-build
+    - name: Get port
+      id: get-port
+      run: |
+        PORT=$(find ports/*/boards/ -type d -name ${{ inputs.board }} | sed 's/^ports\///g;s/\/boards.*//g')
+        if [ -z $PORT ]; then (exit 1); else echo >> $GITHUB_OUTPUT "port=$PORT"; fi
+    - name: Port to platform
+      run: echo >> $GITHUB_ENV "PLATFORM=${{ env[format('PLATFORM_{0}', steps.get-port.outputs.port)] }}"
+    - name: Set up python
+      uses: actions/setup-python@v4
+      with:
+        python-version: 3.x
+    - name: Set up port
+      if: env.PLATFORM == 'esp'
+      uses: ./.github/actions/deps/ports/espressif
+    - name: Set up submodules
+      id: set-up-submodules
+      uses: ./.github/actions/deps/submodules
+      with:
+        action: cache
+        target: ${{ inputs.board }}
+    - name: Set up external
+      uses: ./.github/actions/deps/external
+      with:
+        action: cache
+        platform: ${{ env.PLATFORM }}
+    - name: Set up mpy-cross
+      if: steps.set-up-submodules.outputs.frozen == 'True'
+      uses: ./.github/actions/mpy_cross
+      with:
+        download: false
+    - name: Versions
+      run: |
+        tools/describe
+        gcc --version
+        python3 --version
+        cmake --version || true
+        ninja --version || true
+        aarch64-none-elf-gcc --version || true
+        arm-none-eabi-gcc --version || true
+        xtensa-esp32-elf-gcc --version || true
+        riscv32-esp-elf-gcc --version || true
+        riscv64-unknown-elf-gcc --version || true
+        mkfs.fat --version || true
+    - name: Build board
+      run: make -j2 ${{ inputs.flags }} BOARD=${{ inputs.board }} DEBUG=${{ inputs.debug && '1' || '0' }} TRANSLATION=${{ inputs.language }}
+      working-directory: ports/${{ steps.get-port.outputs.port }}
+    - name: Upload artifact
+      uses: actions/upload-artifact@v3
+      with:
+        name: ${{ inputs.board }}-${{ inputs.language }}-${{ inputs.version }}${{ inputs.flags != '' && '-custom' || '' }}${{ inputs.debug && '-debug' || '' }}
+        path: ports/${{ steps.get-port.outputs.port }}/build-${{ inputs.board }}/firmware.*

.github/workflows/build.yml

@@ -52,6 +52,8 @@ jobs:
         version: true
     - name: Set up external
       uses: ./.github/actions/deps/external
+      with:
+        action: cache
     # Disabled: Needs to be updated
     # - name: Get last commit with checks
     #   id: get-last-commit-with-checks
@@ -200,16 +202,11 @@ jobs:
       with:
         name: docs
         path: _build/latex
-    - name: Zip stubs
-      if: >-
-        (github.event_name == 'push' && github.ref == 'refs/heads/main' && github.repository_owner == 'adafruit') ||
-        (github.event_name == 'release' && (github.event.action == 'published' || github.event.action == 'rerequested'))
-      run: zip -9r circuitpython-stubs.zip circuitpython-stubs
     - name: Upload to S3
       uses: ./.github/actions/upload_aws
       with:
         source: circuitpython-stubs/dist/*.tar.gz
-        destination: stubs/circuitpython-stubs-${{ env.CP_VERSION }}.zip
+        destination: stubs/circuitpython-stubs-${{ env.CP_VERSION }}.tar.gz
         AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
         AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
     - name: Upload stubs to PyPi

README.rst

@@ -138,6 +138,16 @@ Behavior
 -  Adds a safe mode that does not run user code after a hard crash or brown out. This makes it
    possible to fix code that causes nasty crashes by making it available through mass storage after
    the crash. A reset (the button) is needed after it's fixed to get back into normal mode.
+-  Safe mode may be handled programmatically by providing a ``safemode.py``.
+   ``safemode.py`` is run if the board has reset due to entering safe mode, unless the safe mode
+   initiated by the user by pressing button(s).
+   USB is not available so nothing can be printed.
+   ``safemode.py`` can determine why the safe mode occurred
+   using ``supervisor.runtime.safe_mode_reason``, and take appropriate action. For instance,
+   if a hard crash occurred, ``safemode.py`` may do a ``microcontroller.reset()``
+   to automatically restart despite the crash.
+   If the battery is low, but is being charged, ``safemode.py`` may put the board in deep sleep
+   for a while. Or it may simply reset, and have ``code.py`` check the voltage and do the sleep.
 -  RGB status LED indicating CircuitPython state.
    - One green flash - code completed without error.
    - Two red flashes - code ended due to an exception.
@@ -145,9 +155,9 @@ Behavior
 -  Re-runs ``code.py`` or other main file after file system writes by a workflow. (Disable with
    ``supervisor.disable_autoreload()``)
 -  Autoreload is disabled while the REPL is active.
--  Main is one of these: ``code.txt``, ``code.py``, ``main.py``,
-   ``main.txt``
--  Boot is one of these: ``boot.py``, ``boot.txt``
+-  ``code.py`` may also be named``code.txt``, ``main.py``, or ``main.txt``.
+-  ``boot.py`` may also be named ``boot.txt``.
+-  ``safemode.py`` may also be named ``safemode.txt``.
 
 API
 ~~~

locale/ID.po

@@ -2441,6 +2441,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init __() harus mengembalikan None"

locale/circuitpython.pot

@@ -39,8 +39,20 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
-"Please file an issue with the contents of your CIRCUITPY drive at \n"
-"https://github.com/adafruit/circuitpython/issues\n"
+"Please file an issue with your program at https://github.com/adafruit/"
+"circuitpython/issues."
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Press reset to exit safe mode.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"You are in safe mode because:\n"
 msgstr ""
 
 #: py/obj.c
@@ -93,7 +105,7 @@ msgstr ""
 #: ports/raspberrypi/common-hal/alarm/__init__.c
 #: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 #: ports/raspberrypi/common-hal/rtc/RTC.c ports/stm/common-hal/alarm/__init__.c
-#: ports/stm/common-hal/rtc/RTC.c
+#: ports/stm/common-hal/canio/Listener.c ports/stm/common-hal/rtc/RTC.c
 msgid "%q"
 msgstr ""
 
@@ -538,10 +550,6 @@ msgstr ""
 msgid "Attempt to allocate %d blocks"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when VM not running."
-msgstr ""
-
 #: ports/raspberrypi/audio_dma.c
 msgid "Audio conversion not implemented"
 msgstr ""
@@ -590,20 +598,13 @@ msgid "Bitmap size and bits per value must match"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Boot device must be first device (interface #0)."
+msgid "Boot device must be first (interface #0)."
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr ""
 
-#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
-#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
-#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
-#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
-msgid "Both buttons were pressed at start up.\n"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -669,12 +670,6 @@ msgstr ""
 msgid "Bus pin %d is already in use"
 msgstr ""
 
-#: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
-#: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
-#: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
-msgid "Button A was pressed at start up.\n"
-msgstr ""
-
 #: shared-bindings/_bleio/UUID.c
 msgid "Byte buffer must be 16 bytes."
 msgstr ""
@@ -805,10 +800,6 @@ msgstr ""
 msgid "CircuitPython core code crashed hard. Whoops!\n"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "CircuitPython was unable to allocate the heap."
-msgstr ""
-
 #: shared-module/bitbangio/I2C.c
 msgid "Clock stretch too long"
 msgstr ""
@@ -847,10 +838,6 @@ msgstr ""
 msgid "Couldn't allocate decoder"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler."
-msgstr ""
-
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
 msgstr ""
@@ -942,6 +929,10 @@ msgstr ""
 msgid "Error in regex"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Error in safemode.py."
+msgstr ""
+
 #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
 msgid "Error: Failure to bind"
 msgstr ""
@@ -1015,7 +1006,7 @@ msgid "Failed to write internal flash."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Fatal error."
+msgid "Fault detected by hardware."
 msgstr ""
 
 #: py/moduerrno.c
@@ -1103,6 +1094,15 @@ msgstr ""
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Heap allocation when VM not running."
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"Heap was corrupted because the stack was too small. Increase stack size."
+msgstr ""
+
 #: extmod/vfs_posix_file.c py/objstringio.c
 msgid "I/O operation on closed file"
 msgstr ""
@@ -1217,6 +1217,10 @@ msgstr ""
 msgid "Internal watchdog timer expired."
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Interrupt error."
+msgstr ""
+
 #: py/argcheck.c shared-bindings/digitalio/DigitalInOut.c
 msgid "Invalid %q"
 msgstr ""
@@ -1265,10 +1269,6 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "Invalid memory access."
-msgstr ""
-
 #: ports/espressif/common-hal/wifi/Radio.c
 msgid "Invalid multicast MAC address"
 msgstr ""
@@ -1557,10 +1557,6 @@ msgstr ""
 msgid "No timer available"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "Nordic system firmware failure assertion."
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Nordic system firmware out of memory"
 msgstr ""
@@ -2012,53 +2008,19 @@ msgid "Temperature read timed out"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "The BOOT button was pressed at start up.\n"
-msgstr ""
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The CircuitPython heap was corrupted because the stack was too small.\n"
-"Increase the stack size if you know how. If not:"
-msgstr ""
-
-#: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
-msgid "The SW38 button was pressed at start up.\n"
-msgstr ""
-
-#: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
-msgid "The VOLUME button was pressed at start up.\n"
-msgstr ""
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The `microcontroller` module was used to boot into safe mode. Press reset to "
-"exit safe mode."
+msgid "The `microcontroller` module was used to boot into safe mode."
 msgstr ""
 
 #: py/obj.c
 msgid "The above exception was the direct cause of the following exception:"
 msgstr ""
 
-#: ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h
-#: ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h
-#: ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h
-#: ports/espressif/boards/m5stack_atom_u/mpconfigboard.h
-msgid "The central button was pressed at start up.\n"
-msgstr ""
-
-#: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
-msgid "The left button was pressed at start up.\n"
-msgstr ""
-
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid ""
-"The microcontroller's power dipped. Make sure your power supply provides\n"
-"enough power for the whole circuit and press reset (after ejecting "
-"CIRCUITPY)."
+msgid "The power dipped. Make sure you are providing enough power."
 msgstr ""
 
 #: shared-module/audiomixer/MixerVoice.c
@@ -2077,6 +2039,10 @@ msgstr ""
 msgid "The sample's signedness does not match the mixer's"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Third-party firmware fatal error."
+msgstr ""
+
 #: shared-module/imagecapture/ParallelImageCapture.c
 msgid "This microcontroller does not support continuous capture."
 msgstr ""
@@ -2109,10 +2075,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without requesting safe mode."
-msgstr ""
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample"
 msgstr ""
@@ -2204,6 +2166,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Unable to allocate the heap."
+msgstr ""
+
 #: ports/espressif/common-hal/busio/I2C.c
 msgid "Unable to create lock"
 msgstr ""
@@ -2409,13 +2375,44 @@ msgstr ""
 msgid "Writes not supported on Characteristic"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "You are in safe mode because:\n"
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "You pressed both buttons at start up."
+msgstr ""
+
+#: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
+#: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+msgid "You pressed button A at start up."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid ""
-"You pressed the reset button during boot. Press again to exit safe mode."
+msgid "You pressed the BOOT button at start up"
+msgstr ""
+
+#: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
+msgid "You pressed the SW38 button at start up."
+msgstr ""
+
+#: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
+msgid "You pressed the VOLUME button at start up."
+msgstr ""
+
+#: ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h
+#: ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h
+#: ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h
+#: ports/espressif/boards/m5stack_atom_u/mpconfigboard.h
+msgid "You pressed the central button at start up."
+msgstr ""
+
+#: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
+msgid "You pressed the left button at start up."
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "You pressed the reset button during boot."
 msgstr ""
 
 #: supervisor/shared/micropython.c

locale/cs.po

@@ -2428,6 +2428,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr ""

locale/de_DE.po

@@ -2486,6 +2486,10 @@ msgstr ""
 "Du hast beim Booten die Reset-Taste gedrückt. Drücke sie erneut, um den "
 "abgesicherten Modus zu beenden."
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init__() sollte None zurückgeben"

locale/el.po

@@ -2437,6 +2437,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr ""

locale/en_GB.po

@@ -2444,6 +2444,10 @@ msgid ""
 msgstr ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init__() should return None"

locale/es.po

@@ -2494,6 +2494,10 @@ msgstr ""
 "Has presionado el botón de reset durante el arranque. Presiones de nuevo "
 "para salir del modo seguro."
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init__() deberia devolver None"

locale/fil.po

@@ -2428,6 +2428,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init__() dapat magbalik na None"

locale/fr.po

@@ -2512,6 +2512,10 @@ msgstr ""
 "Vous avez pressé le bouton reset pendant le démarrage. Pressez-le à nouveau "
 "pour sortir du mode sûr."
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init__() doit retourner None"

locale/hi.po

@@ -2410,6 +2410,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr ""

locale/it_IT.po

@@ -2438,6 +2438,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init__() deve ritornare None"

locale/ja.po

@@ -2430,6 +2430,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr ""

locale/ko.po

@@ -2414,6 +2414,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr ""

locale/nl.po

@@ -2440,6 +2440,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init __() zou None moeten retourneren"

locale/pl.po

@@ -2421,6 +2421,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init__() powinien zwracać None"

locale/pt_BR.po

@@ -2493,6 +2493,10 @@ msgstr ""
 "Você pressionou o botão reset durante a inicialização. Pressione-o novamente "
 "para sair do modo de segurança."
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "O __init__() deve retornar Nenhum"

locale/ru.po

@@ -2478,6 +2478,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr ""

locale/sv.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-01-29 16:16+0000\n"
+"PO-Revision-Date: 2023-02-15 21:55+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -2466,6 +2466,10 @@ msgstr ""
 "Du tryckte på resetknappen under uppstarten. Tryck igen för att avsluta "
 "felsäkert läge."
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr "[trunkerad på grund av längd]"
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init __() ska returnera None"
@@ -2537,7 +2541,7 @@ msgstr "array har för många dimensioner"
 
 #: extmod/ulab/code/ndarray.c
 msgid "array is too big"
-msgstr ""
+msgstr "matrisen är för stor"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
@@ -3796,7 +3800,7 @@ msgstr "endast mono stöds"
 
 #: extmod/ulab/code/numpy/create.c
 msgid "only ndarrays can be concatenated"
-msgstr ""
+msgstr "endast ndarrays kan sammanfogas"
 
 #: ports/stm/common-hal/audiobusio/PDMIn.c
 msgid "only oversample=64 is supported"

locale/tr.po

@@ -2436,6 +2436,10 @@ msgid ""
 "You pressed the reset button during boot. Press again to exit safe mode."
 msgstr ""
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr ""

locale/zh_Latn_pinyin.po

@@ -2472,6 +2472,10 @@ msgstr ""
 "zài qǐ dòng guò chéng zhōng, nín àn xià le chóng zhì àn niǔ. zài cì àn xià "
 "yǐ tuì chū ān quán mó shì."
 
+#: supervisor/shared/micropython.c
+msgid "[truncated due to length]"
+msgstr ""
+
 #: py/objtype.c
 msgid "__init__() should return None"
 msgstr "__init__() fǎnhuí not"

main.c

@@ -384,7 +384,7 @@ STATIC void print_code_py_status_message(safe_mode_t safe_mode) {
     } else {
         serial_write_compressed(translate("Auto-reload is off.\n"));
     }
-    if (safe_mode != NO_SAFE_MODE) {
+    if (safe_mode != SAFE_MODE_NONE) {
         serial_write_compressed(translate("Running in safe mode! Not running saved code.\n"));
     }
 }
@@ -410,11 +410,11 @@ STATIC bool run_code_py(safe_mode_t safe_mode, bool *simulate_reset) {
 
     // Do the filesystem flush check before reload in case another write comes
     // in while we're doing the flush.
-    if (safe_mode == NO_SAFE_MODE) {
+    if (safe_mode == SAFE_MODE_NONE) {
         stack_resize();
         filesystem_flush();
     }
-    if (safe_mode == NO_SAFE_MODE && !autoreload_pending()) {
+    if (safe_mode == SAFE_MODE_NONE && !autoreload_pending()) {
         static const char *const supported_filenames[] = {
             "code.txt", "code.py", "main.py", "main.txt"
         };
@@ -538,7 +538,7 @@ STATIC bool run_code_py(safe_mode_t safe_mode, bool *simulate_reset) {
     } else
     #endif
     if (_exec_result.return_code != PYEXEC_EXCEPTION) {
-        if (safe_mode == NO_SAFE_MODE) {
+        if (safe_mode == SAFE_MODE_NONE) {
             color = ALL_DONE;
             blink_count = ALL_DONE_BLINKS;
         } else {
@@ -758,8 +758,34 @@ STATIC bool run_code_py(safe_mode_t safe_mode, bool *simulate_reset) {
 
 vstr_t *boot_output;
 
+#if CIRCUITPY_SAFEMODE_PY
+STATIC void __attribute__ ((noinline)) run_safemode_py(safe_mode_t safe_mode) {
+    // Don't run if we aren't in safe mode or we won't be able to find safemode.py.
+    // Also don't run if it's a user-initiated safemode (pressing button(s) during boot),
+    // since that's deliberate.
+    if (safe_mode == SAFE_MODE_NONE || safe_mode == SAFE_MODE_USER || !filesystem_present()) {
+        return;
+    }
+
+    supervisor_allocation *heap = allocate_remaining_memory();
+    start_mp(heap);
+
+    static const char *const safemode_py_filenames[] = {"safemode.py", "safemode.txt"};
+    maybe_run_list(safemode_py_filenames, MP_ARRAY_SIZE(safemode_py_filenames));
+
+    // If safemode.py itself caused an error, change the safe_mode state to indicate that.
+    if (_exec_result.exception != MP_OBJ_NULL &&
+        _exec_result.exception != MP_OBJ_SENTINEL) {
+        set_safe_mode(SAFE_MODE_SAFEMODE_PY_ERROR);
+    }
+
+    cleanup_after_vm(heap, _exec_result.exception);
+    _exec_result.exception = NULL;
+}
+#endif
+
 STATIC void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
-    if (safe_mode == NO_HEAP) {
+    if (safe_mode == SAFE_MODE_NO_HEAP) {
         return;
     }
 
@@ -767,7 +793,7 @@ STATIC void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) {
 
     // There is USB setup to do even if boot.py is not actually run.
     const bool ok_to_run = filesystem_present()
-        && safe_mode == NO_SAFE_MODE
+        && safe_mode == SAFE_MODE_NONE
         && MP_STATE_VM(vfs_mount_table) != NULL;
 
     static const char *const boot_py_filenames[] = {"boot.py", "boot.txt"};
@@ -949,7 +975,7 @@ STATIC int run_repl(void) {
 int __attribute__((used)) main(void) {
 
     // initialise the cpu and peripherals
-    safe_mode_t safe_mode = port_init();
+    set_safe_mode(port_init());
 
     // Turn on RX and TX LEDs if we have them.
     init_rxtx_leds();
@@ -965,8 +991,8 @@ int __attribute__((used)) main(void) {
     serial_early_init();
 
     // Wait briefly to give a reset window where we'll enter safe mode after the reset.
-    if (safe_mode == NO_SAFE_MODE) {
-        safe_mode = wait_for_safe_mode_reset();
+    if (get_safe_mode() == SAFE_MODE_NONE) {
+        set_safe_mode(wait_for_safe_mode_reset());
     }
 
     stack_init();
@@ -992,8 +1018,8 @@ int __attribute__((used)) main(void) {
 
     // Check whether CIRCUITPY is available. No need to reset to get safe mode
     // since we haven't run user code yet.
-    if (!filesystem_init(safe_mode == NO_SAFE_MODE, false)) {
-        safe_mode = NO_CIRCUITPY;
+    if (!filesystem_init(get_safe_mode() == SAFE_MODE_NONE, false)) {
+        set_safe_mode(SAFE_MODE_NO_CIRCUITPY);
     }
 
     #if CIRCUITPY_ALARM
@@ -1018,16 +1044,23 @@ int __attribute__((used)) main(void) {
     supervisor_set_run_reason(RUN_REASON_STARTUP);
 
     // If not in safe mode turn on autoreload by default but before boot.py in case it wants to change it.
-    if (safe_mode == NO_SAFE_MODE) {
+    if (get_safe_mode() == SAFE_MODE_NONE) {
         autoreload_enable();
     }
 
     // By default our internal flash is readonly to local python code and
-    // writable over USB. Set it here so that boot.py can change it.
+    // writable over USB. Set it here so that safemode.py or boot.py can change it.
     filesystem_set_internal_concurrent_write_protection(true);
     filesystem_set_internal_writable_by_usb(CIRCUITPY_USB == 1);
 
-    run_boot_py(safe_mode);
+    #if CIRCUITPY_SAFEMODE_PY
+    // Run safemode.py if we ARE in safe mode.
+    // If safemode.py does not do a hard reset, and exits normally, we will continue on
+    // and report the safe mode as usual.
+    run_safemode_py(get_safe_mode());
+    #endif
+
+    run_boot_py(get_safe_mode());
 
     supervisor_workflow_start();
 
@@ -1052,7 +1085,7 @@ int __attribute__((used)) main(void) {
                 // If code.py did a fake deep sleep, pretend that we
                 // are running code.py for the first time after a hard
                 // reset. This will preserve any alarm information.
-                skip_repl = run_code_py(safe_mode, &simulate_reset);
+                skip_repl = run_code_py(get_safe_mode(), &simulate_reset);
             } else {
                 skip_repl = false;
             }
@@ -1112,14 +1145,14 @@ void gc_collect(void) {
 }
 
 void NORETURN nlr_jump_fail(void *val) {
-    reset_into_safe_mode(MICROPY_NLR_JUMP_FAIL);
+    reset_into_safe_mode(SAFE_MODE_NLR_JUMP_FAIL);
     while (true) {
     }
 }
 
 #ifndef NDEBUG
 static void NORETURN __fatal_error(const char *msg) {
-    reset_into_safe_mode(MICROPY_FATAL_ERROR);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
     }
 }

ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h

@@ -23,7 +23,7 @@
 #define CALIBRATE_CRYSTALLESS 1
 
 // Explanation of how a user got into safe mode.
-#define BOARD_USER_SAFE_MODE_ACTION translate("Both buttons were pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed both buttons at start up.")
 
 // Increase stack size slightly due to CPX library import nesting
 #define CIRCUITPY_DEFAULT_STACK_SIZE  (4248) // divisible by 8

ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h

@@ -23,7 +23,7 @@
 #define CALIBRATE_CRYSTALLESS 1
 
 // Explanation of how a user got into safe mode.
-#define BOARD_USER_SAFE_MODE_ACTION translate("Both buttons were pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed both buttons at start up.")
 
 // Increase stack size slightly due to CPX library import nesting
 #define CIRCUITPY_DEFAULT_STACK_SIZE  (4248) // divisible by 8

ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h

@@ -23,7 +23,7 @@
 #define CALIBRATE_CRYSTALLESS 1
 
 // Explanation of how a user got into safe mode.
-#define BOARD_USER_SAFE_MODE_ACTION translate("Both buttons were pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed both buttons at start up.")
 
 // Increase stack size slightly due to CPX library import nesting.
 #define CIRCUITPY_DEFAULT_STACK_SIZE  (4248)  // divisible by 8

ports/atmel-samd/boards/meowmeow/mpconfigboard.h

@@ -6,7 +6,7 @@
 #define CALIBRATE_CRYSTALLESS 1
 
 // Explanation of how a user got into safe mode.
-#define BOARD_USER_SAFE_MODE_ACTION translate("Both buttons were pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed both buttons at start up.")
 
 #define DEFAULT_I2C_BUS_SCL (&pin_PA01)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA00)

ports/atmel-samd/boards/pewpew_m4/mpconfigboard.mk

@@ -53,3 +53,13 @@ CIRCUITPY_DISPLAY_FONT = $(TOP)/ports/atmel-samd/boards/ugame10/brutalist-6.bdf
 
 # Override optimization to keep binary small
 OPTIMIZATION_FLAGS = -Os
+
+# We don't have room for the fonts for terminalio for certain languages,
+# so turn off terminalio, and if it's off and displayio is on,
+# force a clean build.
+# Note that we cannot test $(CIRCUITPY_DISPLAYIO) directly with an
+# ifeq, because it's not set yet.
+ifneq (,$(filter $(TRANSLATION),ja ko ru))
+CIRCUITPY_TERMINALIO = 0
+RELEASE_NEEDS_CLEAN_BUILD = $(CIRCUITPY_DISPLAYIO)
+endif

ports/atmel-samd/common-hal/microcontroller/__init__.c

@@ -51,9 +51,8 @@ void common_hal_mcu_disable_interrupts(void) {
 
 void common_hal_mcu_enable_interrupts(void) {
     if (nesting_count == 0) {
-        // This is very very bad because it means there was mismatched disable/enables so we
-        // "HardFault".
-        HardFault_Handler();
+        // This is very very bad because it means there was mismatched disable/enables.
+        reset_into_safe_mode(SAFE_MODE_INTERRUPT_ERROR);
     }
     nesting_count--;
     if (nesting_count > 0) {
@@ -76,7 +75,7 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
         _bootloader_dbl_tap = DBL_TAP_MAGIC_QUICK_BOOT;
     }
     if (runmode == RUNMODE_SAFE_MODE) {
-        safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);
+        safe_mode_on_next_reset(SAFE_MODE_PROGRAMMATIC);
     }
 }
 

ports/atmel-samd/mpconfigport.mk

@@ -57,6 +57,7 @@ CIRCUITPY_ZLIB = 0
 
 ifeq ($(INTERNAL_FLASH_FILESYSTEM),1)
 CIRCUITPY_ONEWIREIO ?= 0
+CIRCUITPY_SAFEMODE_PY ?= 0
 CIRCUITPY_USB_IDENTIFICATION ?= 0
 endif
 
@@ -77,10 +78,8 @@ SUPEROPT_VM = 0
 
 CIRCUITPY_LTO_PARTITION = one
 
-ifeq ($(CIRCUITPY_FULL_BUILD),0)
-# On the smallest boards, this saves about 180 bytes. On other boards, it may -increase- space used.
+# On smaller builds this saves about 180 bytes. On other boards, it may -increase- space used, so use with care.
 CFLAGS_BOARD = -fweb -frename-registers
-endif
 
 endif # samd21
 ######################################################################

ports/atmel-samd/supervisor/port.c

@@ -368,20 +368,20 @@ safe_mode_t port_init(void) {
 
     #ifdef SAMD21
     if (PM->RCAUSE.bit.BOD33 == 1 || PM->RCAUSE.bit.BOD12 == 1) {
-        return BROWNOUT;
+        return SAFE_MODE_BROWNOUT;
     }
     #endif
     #ifdef SAM_D5X_E5X
     if (RSTC->RCAUSE.bit.BODVDD == 1 || RSTC->RCAUSE.bit.BODCORE == 1) {
-        return BROWNOUT;
+        return SAFE_MODE_BROWNOUT;
     }
     #endif
 
     if (board_requests_safe_mode()) {
-        return USER_SAFE_MODE;
+        return SAFE_MODE_USER;
     }
 
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void reset_port(void) {
@@ -720,7 +720,7 @@ __attribute__((used)) void HardFault_Handler(void) {
     REG_MTB_MASTER = 0x00000000 + 6;
     #endif
 
-    reset_into_safe_mode(HARD_CRASH);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }

ports/broadcom/common-hal/microcontroller/__init__.c

@@ -46,7 +46,7 @@ void common_hal_mcu_disable_interrupts(void) {
 
 void common_hal_mcu_enable_interrupts(void) {
     if (nesting_count == 0) {
-        // reset_into_safe_mode(LOCKING_ERROR);
+        // reset_into_safe_mode(SAFE_MODE_INTERRUPT_ERROR);
     }
     nesting_count--;
     if (nesting_count > 0) {

ports/broadcom/supervisor/port.c

@@ -78,10 +78,10 @@ safe_mode_t port_init(void) {
     // Check brownout.
 
     if (board_requests_safe_mode()) {
-        return USER_SAFE_MODE;
+        return SAFE_MODE_USER;
     }
 
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void reset_port(void) {

ports/cxd56/common-hal/microcontroller/__init__.c

@@ -74,7 +74,7 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
     if (runmode == RUNMODE_BOOTLOADER) {
         mp_raise_ValueError(translate("Cannot reset into bootloader because no bootloader is present"));
     } else if (runmode == RUNMODE_SAFE_MODE) {
-        safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);
+        safe_mode_on_next_reset(SAFE_MODE_PROGRAMMATIC);
     }
 }
 

ports/cxd56/supervisor/port.c

@@ -66,10 +66,10 @@ safe_mode_t port_init(void) {
     heap_size = size / sizeof(uint32_t);
 
     if (board_requests_safe_mode()) {
-        return USER_SAFE_MODE;
+        return SAFE_MODE_USER;
     }
 
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void reset_cpu(void) {

ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h

@@ -47,7 +47,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO38)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("The SW38 button was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the SW38 button at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h

@@ -35,7 +35,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("The VOLUME button was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the VOLUME button at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h

@@ -38,7 +38,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO39)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("The central button was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the central button at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h

@@ -42,7 +42,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO39)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("The central button was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the central button at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h

@@ -42,7 +42,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO39)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("The central button was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the central button at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/boards/m5stack_atom_u/mpconfigboard.h

@@ -41,7 +41,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO39)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("The central button was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the central button at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/boards/m5stack_core_basic/mpconfigboard.h

@@ -42,7 +42,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO39)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("Button A was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed button A at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/boards/m5stack_core_fire/mpconfigboard.h

@@ -43,7 +43,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO39)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("Button A was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed button A at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/boards/m5stack_stick_c/mpconfigboard.h

@@ -39,7 +39,7 @@
 #define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO37)
 
 // Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("Button A was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed button A at start up.")
 
 // UART pins attached to the USB-serial converter chip
 #define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)

ports/espressif/common-hal/microcontroller/__init__.c

@@ -108,7 +108,7 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
             break;
         case RUNMODE_SAFE_MODE:
             // enter safe mode on next boot
-            safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);
+            safe_mode_on_next_reset(SAFE_MODE_PROGRAMMATIC);
             break;
         case RUNMODE_BOOTLOADER:
             // DFU download

ports/espressif/supervisor/port.c

@@ -318,25 +318,25 @@ safe_mode_t port_init(void) {
     }
     if (heap == NULL) {
         heap_size = 0;
-        return NO_HEAP;
+        return SAFE_MODE_NO_HEAP;
     }
 
     esp_reset_reason_t reason = esp_reset_reason();
     switch (reason) {
         case ESP_RST_BROWNOUT:
-            return BROWNOUT;
+            return SAFE_MODE_BROWNOUT;
         case ESP_RST_PANIC:
-            return HARD_CRASH;
+            return SAFE_MODE_HARD_FAULT;
         case ESP_RST_INT_WDT:
             // The interrupt watchdog is used internally to make sure that latency sensitive
             // interrupt code isn't blocked. User watchdog resets come through ESP_RST_WDT.
-            return WATCHDOG_RESET;
+            return SAFE_MODE_WATCHDOG;
         case ESP_RST_WDT:
         default:
             break;
     }
 
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void reset_port(void) {

ports/litex/common-hal/microcontroller/__init__.c

@@ -70,9 +70,8 @@ void common_hal_mcu_disable_interrupts(void) {
 __attribute__((section(".ramtext")))
 void common_hal_mcu_enable_interrupts(void) {
     if (nesting_count == 0) {
-        // This is very very bad because it means there was mismatched disable/enables so we
-        // "HardFault".
-        asm ("ebreak");
+        // This is very very bad because it means there was mismatched disable/enables.
+        reset_into_safe_mode(SAFE_MODE_INTERRUPT_ERROR);
     }
     nesting_count--;
     if (nesting_count > 0) {
@@ -83,7 +82,7 @@ void common_hal_mcu_enable_interrupts(void) {
 
 void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
     if (runmode == RUNMODE_SAFE_MODE) {
-        safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);
+        safe_mode_on_next_reset(SAFE_MODE_PROGRAMMATIC);
     }
 }
 

ports/litex/supervisor/port.c

@@ -71,7 +71,7 @@ safe_mode_t port_init(void) {
     irq_setmask(0);
     irq_setie(1);
     tick_init();
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 extern uint32_t _ebss;

ports/mimxrt10xx/common-hal/microcontroller/__init__.c

@@ -52,12 +52,10 @@ void common_hal_mcu_disable_interrupts(void) {
     nesting_count++;
 }
 
-void HardFault_Handler(void);
 void common_hal_mcu_enable_interrupts(void) {
     if (nesting_count == 0) {
-        // This is very very bad because it means there was mismatched disable/enables so we
-        // "HardFault".
-        HardFault_Handler();
+        // This is very very bad because it means there was mismatched disable/enables
+        reset_into_safe_mode(SAFE_MODE_INTERRUPT_ERROR);
     }
     nesting_count--;
     if (nesting_count > 0) {
@@ -80,7 +78,7 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
         DBL_TAP_REG = DBL_TAP_MAGIC_QUICK_BOOT;
     }
     if (runmode == RUNMODE_SAFE_MODE) {
-        safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);
+        safe_mode_on_next_reset(SAFE_MODE_PROGRAMMATIC);
     }
 }
 

ports/mimxrt10xx/supervisor/port.c

@@ -259,10 +259,10 @@ safe_mode_t port_init(void) {
     // run yet, which uses `never_reset` to protect critical pins from being reset by  `reset_port`.
 
     if (board_requests_safe_mode()) {
-        return USER_SAFE_MODE;
+        return SAFE_MODE_USER;
     }
 
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void reset_port(void) {
@@ -419,7 +419,7 @@ void port_idle_until_interrupt(void) {
  */
 void MemManage_Handler(void);
 __attribute__((used)) void MemManage_Handler(void) {
-    reset_into_safe_mode(MEM_MANAGE);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }
@@ -430,7 +430,7 @@ __attribute__((used)) void MemManage_Handler(void) {
  */
 void BusFault_Handler(void);
 __attribute__((used)) void BusFault_Handler(void) {
-    reset_into_safe_mode(MEM_MANAGE);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }
@@ -441,7 +441,7 @@ __attribute__((used)) void BusFault_Handler(void) {
  */
 void UsageFault_Handler(void);
 __attribute__((used)) void UsageFault_Handler(void) {
-    reset_into_safe_mode(MEM_MANAGE);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }
@@ -452,7 +452,7 @@ __attribute__((used)) void UsageFault_Handler(void) {
  */
 void HardFault_Handler(void);
 __attribute__((used)) void HardFault_Handler(void) {
-    reset_into_safe_mode(HARD_CRASH);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }

ports/nrf/boards/aramcon2_badge/mpconfigboard.h

@@ -52,7 +52,7 @@
 
 #define CIRCUITPY_BOOT_BUTTON (&pin_P0_29)
 
-#define BOARD_USER_SAFE_MODE_ACTION translate("The left button was pressed at start up.\n")
+#define BOARD_USER_SAFE_MODE_ACTION translate("You pressed the left button at start up.")
 
 #define CIRCUITPY_INTERNAL_NVM_SIZE (4096)
 

ports/nrf/common-hal/_bleio/Adapter.c

@@ -91,7 +91,7 @@ const nvm_bytearray_obj_t common_hal_bleio_nvm_obj = {
 };
 
 STATIC void softdevice_assert_handler(uint32_t id, uint32_t pc, uint32_t info) {
-    reset_into_safe_mode(NORDIC_SOFT_DEVICE_ASSERT);
+    reset_into_safe_mode(SAFE_MODE_SDK_FATAL_ERROR);
 }
 
 bleio_connection_internal_t bleio_connections[BLEIO_TOTAL_CONNECTION_COUNT];

ports/nrf/common-hal/microcontroller/__init__.c

@@ -68,9 +68,8 @@ void common_hal_mcu_disable_interrupts() {
 
 void common_hal_mcu_enable_interrupts() {
     if (nesting_count == 0) {
-        // This is very very bad because it means there was mismatched disable/enables so we
-        // crash.
-        reset_into_safe_mode(HARD_CRASH);
+        // This is very very bad because it means there was mismatched disable/enables.
+        reset_into_safe_mode(SAFE_MODE_INTERRUPT_ERROR);
     }
     nesting_count--;
     if (nesting_count > 0) {
@@ -88,7 +87,7 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
         sd_power_gpregret_set(0,0);
     }
     if (runmode == RUNMODE_SAFE_MODE) {
-        safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);
+        safe_mode_on_next_reset(SAFE_MODE_PROGRAMMATIC);
     }
 }
 

ports/nrf/supervisor/internal_flash.c

@@ -75,7 +75,7 @@ void port_internal_flash_flush(void) {
     // Skip if data is the same
     if (memcmp(_flash_cache, (void *)_flash_page_addr, FLASH_PAGE_SIZE) != 0) {
         if (!nrf_nvm_safe_flash_page_write(_flash_page_addr, _flash_cache)) {
-            reset_into_safe_mode(FLASH_WRITE_FAIL);
+            reset_into_safe_mode(SAFE_MODE_FLASH_WRITE_FAIL);
         }
     }
 }

ports/nrf/supervisor/port.c

@@ -77,7 +77,7 @@ extern void qspi_disable(void);
 #endif
 
 static void power_warning_handler(void) {
-    reset_into_safe_mode(BROWNOUT);
+    reset_into_safe_mode(SAFE_MODE_BROWNOUT);
 }
 
 uint32_t reset_reason_saved = 0;
@@ -204,11 +204,11 @@ safe_mode_t port_init(void) {
         // If USB is connected, then the user might be editing `code.py`,
         // in which case we should reboot into Safe Mode.
         if (usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk) {
-            return WATCHDOG_RESET;
+            return SAFE_MODE_WATCHDOG;
         }
     }
 
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void reset_port(void) {
@@ -399,7 +399,7 @@ void port_idle_until_interrupt(void) {
 
 extern void HardFault_Handler(void);
 void HardFault_Handler(void) {
-    reset_into_safe_mode(HARD_CRASH);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }

ports/raspberrypi/common-hal/microcontroller/__init__.c

@@ -60,7 +60,7 @@ void common_hal_mcu_disable_interrupts(void) {
 
 void common_hal_mcu_enable_interrupts(void) {
     if (nesting_count == 0) {
-        // reset_into_safe_mode(LOCKING_ERROR);
+        // reset_into_safe_mode(SAFE_MODE_INTERRUPT_ERROR);
     }
     nesting_count--;
     if (nesting_count > 0) {
@@ -79,7 +79,7 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
             next_reset_to_bootloader = true;
             break;
         case RUNMODE_SAFE_MODE:
-            safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);
+            safe_mode_on_next_reset(SAFE_MODE_PROGRAMMATIC);
             break;
         default:
             break;

ports/raspberrypi/supervisor/port.c

@@ -161,10 +161,10 @@ safe_mode_t port_init(void) {
     }
     #endif
     if (board_requests_safe_mode()) {
-        return USER_SAFE_MODE;
+        return SAFE_MODE_USER;
     }
 
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void reset_port(void) {
@@ -312,7 +312,7 @@ __attribute__((used)) void HardFault_Handler(void) {
     REG_MTB_MASTER = 0x00000000 + 6;
     #endif
 
-    reset_into_safe_mode(HARD_CRASH);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }

ports/stm/common-hal/canio/Listener.c

@@ -105,8 +105,7 @@ STATIC int next_filter(canio_can_obj_t *can) {
             return i;
         }
     }
-    reset_into_safe_mode(MICROPY_FATAL_ERROR);
-    return -1;
+    mp_raise_msg_varg(&mp_type_RuntimeError, translate("%q"), MP_QSTR_Listener);
 }
 
 // IDE = "extended ID" flag of packet header.  We always add this bit to the

ports/stm/common-hal/microcontroller/__init__.c

@@ -61,9 +61,8 @@ void common_hal_mcu_disable_interrupts(void) {
 
 void common_hal_mcu_enable_interrupts(void) {
     if (nesting_count == 0) {
-        // This is very very bad because it means there was mismatched disable/enables so we
-        // "HardFault".
-        asm ("bkpt");
+        // This is very very bad because it means there was mismatched disable/enables.
+        reset_into_safe_mode(SAFE_MODE_INTERRUPT_ERROR);
     }
     nesting_count--;
     if (nesting_count > 0) {
@@ -77,7 +76,7 @@ static bool next_reset_to_bootloader = false;
 
 void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) {
     if (runmode == RUNMODE_SAFE_MODE) {
-        safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE);
+        safe_mode_on_next_reset(SAFE_MODE_PROGRAMMATIC);
     }
     if (runmode == RUNMODE_BOOTLOADER) {
         next_reset_to_bootloader = true;

ports/stm/supervisor/internal_flash.c

@@ -215,7 +215,7 @@ void port_internal_flash_flush(void) {
     EraseInitStruct.NbSectors = 1;
     #endif
     if (sector_size > sizeof(_flash_cache) || sector_start_addr == 0xffffffff) {
-        reset_into_safe_mode(FLASH_WRITE_FAIL);
+        reset_into_safe_mode(SAFE_MODE_FLASH_WRITE_FAIL);
     }
 
     // Skip if data is the same
@@ -228,7 +228,7 @@ void port_internal_flash_flush(void) {
         if (HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK) {
             // error occurred during sector erase
             HAL_FLASH_Lock(); // lock the flash
-            reset_into_safe_mode(FLASH_WRITE_FAIL);
+            reset_into_safe_mode(SAFE_MODE_FLASH_WRITE_FAIL);
         }
 
         uint32_t *cache_addr = (uint32_t *)_flash_cache;
@@ -240,7 +240,7 @@ void port_internal_flash_flush(void) {
                 (uint32_t)cache_addr) != HAL_OK) {
                 // error occurred during flash write
                 HAL_FLASH_Lock(); // lock the flash
-                reset_into_safe_mode(FLASH_WRITE_FAIL);
+                reset_into_safe_mode(SAFE_MODE_FLASH_WRITE_FAIL);
             }
             // RAM memory is by word (4 byte), but flash memory is by byte
             cache_addr += 8;
@@ -253,7 +253,7 @@ void port_internal_flash_flush(void) {
                 *(uint64_t *)cache_addr) != HAL_OK) {
                 // error occurred during flash write
                 HAL_FLASH_Lock(); // lock the flash
-                reset_into_safe_mode(FLASH_WRITE_FAIL);
+                reset_into_safe_mode(SAFE_MODE_FLASH_WRITE_FAIL);
             }
             // RAM memory is by word (4 byte), but flash memory is by byte
             cache_addr += 2;
@@ -267,7 +267,7 @@ void port_internal_flash_flush(void) {
                 (uint64_t)*cache_addr) != HAL_OK) {
                 // error occurred during flash write
                 HAL_FLASH_Lock(); // lock the flash
-                reset_into_safe_mode(FLASH_WRITE_FAIL);
+                reset_into_safe_mode(SAFE_MODE_FLASH_WRITE_FAIL);
             }
             // RAM memory is by word (4 byte), but flash memory is by byte
             cache_addr += 1;
@@ -335,7 +335,7 @@ mp_uint_t supervisor_flash_write_blocks(const uint8_t *src, uint32_t block_num,
 
         // Fail for any sector outside what's supported by the cache
         if (sector_size > sizeof(_flash_cache)) {
-            reset_into_safe_mode(FLASH_WRITE_FAIL);
+            reset_into_safe_mode(SAFE_MODE_FLASH_WRITE_FAIL);
         }
 
         // Find how many blocks are left in the sector

ports/stm/supervisor/port.c

@@ -211,7 +211,7 @@ safe_mode_t port_init(void) {
     // Turn off SysTick
     SysTick->CTRL = 0;
 
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void HAL_Delay(uint32_t delay_ms) {
@@ -357,28 +357,28 @@ uint32_t port_get_saved_word(void) {
 }
 
 __attribute__((used)) void MemManage_Handler(void) {
-    reset_into_safe_mode(MEM_MANAGE);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }
 }
 
 __attribute__((used)) void BusFault_Handler(void) {
-    reset_into_safe_mode(MEM_MANAGE);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }
 }
 
 __attribute__((used)) void UsageFault_Handler(void) {
-    reset_into_safe_mode(MEM_MANAGE);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }
 }
 
 __attribute__((used)) void HardFault_Handler(void) {
-    reset_into_safe_mode(HARD_CRASH);
+    reset_into_safe_mode(SAFE_MODE_HARD_FAULT);
     while (true) {
         asm ("nop;");
     }

py/circuitpy_defns.mk

@@ -530,6 +530,11 @@ $(filter $(SRC_PATTERNS), \
 	wifi/Packet.c \
 )
 
+ifeq ($(CIRCUITPY_SAFEMODE_PY),1)
+SRC_BINDINGS_ENUMS += \
+	supervisor/SafeModeReason.c
+endif
+
 SRC_BINDINGS_ENUMS += \
 	util.c
 

py/circuitpy_mpconfig.mk

@@ -372,6 +372,10 @@ CFLAGS += -DCIRCUITPY_ROTARYIO_SOFTENCODER=$(CIRCUITPY_ROTARYIO_SOFTENCODER)
 CIRCUITPY_RTC ?= 1
 CFLAGS += -DCIRCUITPY_RTC=$(CIRCUITPY_RTC)
 
+# Enable support for safemode.py
+CIRCUITPY_SAFEMODE_PY ?= 1
+CFLAGS += -DCIRCUITPY_SAFEMODE_PY=$(CIRCUITPY_SAFEMODE_PY)
+
 # CIRCUITPY_SAMD is handled in the atmel-samd tree.
 # Only for SAMD chips.
 # Assume not a SAMD build.

py/gc.c

@@ -518,7 +518,7 @@ void *gc_alloc(size_t n_bytes, unsigned int alloc_flags, bool long_lived) {
     }
 
     if (MP_STATE_MEM(gc_pool_start) == 0) {
-        reset_into_safe_mode(GC_ALLOC_OUTSIDE_VM);
+        reset_into_safe_mode(SAFE_MODE_GC_ALLOC_OUTSIDE_VM);
     }
 
     GC_ENTER();
@@ -712,7 +712,7 @@ void gc_free(void *ptr) {
         GC_EXIT();
     } else {
         if (MP_STATE_MEM(gc_pool_start) == 0) {
-            reset_into_safe_mode(GC_ALLOC_OUTSIDE_VM);
+            reset_into_safe_mode(SAFE_MODE_GC_ALLOC_OUTSIDE_VM);
         }
         // get the GC block number corresponding to this pointer
         assert(VERIFY_PTR(ptr));

shared-bindings/microcontroller/ResetReason.c

@@ -42,7 +42,7 @@ MAKE_ENUM_VALUE(mcu_reset_reason_type, reset_reason, RESCUE_DEBUG, RESET_REASON_
 //|     """The reason the microntroller was last reset"""
 //|
 //|     POWER_ON: object
-//|     """The microntroller was started from power off."""
+//|     """The microcontroller was started from power off."""
 //|
 //|     BROWNOUT: object
 //|     """The microntroller was reset due to too low a voltage."""

shared-bindings/supervisor/Runtime.c

@@ -32,6 +32,7 @@
 
 #include "shared-bindings/supervisor/RunReason.h"
 #include "shared-bindings/supervisor/Runtime.h"
+#include "shared-bindings/supervisor/SafeModeReason.h"
 
 #include "supervisor/shared/reload.h"
 #include "supervisor/shared/stack.h"
@@ -106,7 +107,7 @@ void supervisor_set_run_reason(supervisor_run_reason_t run_reason) {
 }
 
 //|     run_reason: RunReason
-//|     """Why CircuitPython started running this particular time."""
+//|     """Why CircuitPython started running this particular time (read-only)."""
 STATIC mp_obj_t supervisor_runtime_get_run_reason(mp_obj_t self) {
     return cp_enum_find(&supervisor_run_reason_type, _run_reason);
 }
@@ -115,6 +116,23 @@ MP_DEFINE_CONST_FUN_OBJ_1(supervisor_runtime_get_run_reason_obj, supervisor_runt
 MP_PROPERTY_GETTER(supervisor_runtime_run_reason_obj,
     (mp_obj_t)&supervisor_runtime_get_run_reason_obj);
 
+//|     safe_mode_reason: SafeModeReason
+//|     """Why CircuitPython went into safe mode this particular time (read-only).
+//|
+//|     **Limitations**: Raises ``NotImplementedError`` on builds that do not implement ``safemode.py``.
+//|     """
+STATIC mp_obj_t supervisor_runtime_get_safe_mode_reason(mp_obj_t self) {
+    #if CIRCUITPY_SAFEMODE_PY
+    return cp_enum_find(&supervisor_safe_mode_reason_type, get_safe_mode());
+    #else
+    mp_raise_NotImplementedError(NULL);
+    #endif
+}
+MP_DEFINE_CONST_FUN_OBJ_1(supervisor_runtime_get_safe_mode_reason_obj, supervisor_runtime_get_safe_mode_reason);
+
+MP_PROPERTY_GETTER(supervisor_runtime_safe_mode_reason_obj,
+    (mp_obj_t)&supervisor_runtime_get_safe_mode_reason_obj);
+
 //|     autoreload: bool
 //|     """Whether CircuitPython may autoreload based on workflow writes to the filesystem."""
 //|
@@ -198,6 +216,7 @@ STATIC const mp_rom_map_elem_t supervisor_runtime_locals_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_serial_connected), MP_ROM_PTR(&supervisor_runtime_serial_connected_obj) },
     { MP_ROM_QSTR(MP_QSTR_serial_bytes_available), MP_ROM_PTR(&supervisor_runtime_serial_bytes_available_obj) },
     { MP_ROM_QSTR(MP_QSTR_run_reason), MP_ROM_PTR(&supervisor_runtime_run_reason_obj) },
+    { MP_ROM_QSTR(MP_QSTR_safe_mode_reason), MP_ROM_PTR(&supervisor_runtime_safe_mode_reason_obj) },
     { MP_ROM_QSTR(MP_QSTR_autoreload), MP_ROM_PTR(&supervisor_runtime_autoreload_obj) },
     { MP_ROM_QSTR(MP_QSTR_ble_workflow),  MP_ROM_PTR(&supervisor_runtime_ble_workflow_obj) },
     { MP_ROM_QSTR(MP_QSTR_rgb_status_brightness),  MP_ROM_PTR(&supervisor_runtime_rgb_status_brightness_obj) },

shared-bindings/supervisor/Runtime.h

@@ -31,12 +31,16 @@
 #include "py/obj.h"
 
 #include "shared-bindings/supervisor/RunReason.h"
+#include "shared-bindings/supervisor/SafeModeReason.h"
 
 extern const mp_obj_type_t supervisor_runtime_type;
 
 supervisor_run_reason_t supervisor_get_run_reason(void);
 void supervisor_set_run_reason(supervisor_run_reason_t run_reason);
 
+safe_mode_t supervisor_get_safe_mode(void);
+void supervisor_set_safe_mode(safe_mode_t safe_mode);
+
 bool common_hal_supervisor_runtime_get_serial_connected(void);
 
 bool common_hal_supervisor_runtime_get_serial_bytes_available(void);

shared-bindings/supervisor/SafeModeReason.c

@@ -0,0 +1,158 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Dan Halbert for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/enum.h"
+
+#include "shared-bindings/supervisor/SafeModeReason.h"
+
+// Reuse the non-Python safe_mode_t enum
+#include "supervisor/shared/safe_mode.h"
+
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, NONE, SAFE_MODE_NONE);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, BROWNOUT, SAFE_MODE_BROWNOUT);
+// alphabetical from here down
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, FLASH_WRITE_FAIL, SAFE_MODE_FLASH_WRITE_FAIL);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, GC_ALLOC_OUTSIDE_VM, SAFE_MODE_GC_ALLOC_OUTSIDE_VM);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, HARD_FAULT, SAFE_MODE_HARD_FAULT);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, INTERRUPT_ERROR, SAFE_MODE_INTERRUPT_ERROR);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, NLR_JUMP_FAIL, SAFE_MODE_NLR_JUMP_FAIL);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, NO_CIRCUITPY, SAFE_MODE_NO_CIRCUITPY);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, NO_HEAP, SAFE_MODE_NO_HEAP);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, PROGRAMMATIC, SAFE_MODE_PROGRAMMATIC);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, SDK_FATAL_ERROR, SAFE_MODE_SDK_FATAL_ERROR);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, STACK_OVERFLOW, SAFE_MODE_STACK_OVERFLOW);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, USB_BOOT_DEVICE_NOT_INTERFACE_ZERO, SAFE_MODE_USB_BOOT_DEVICE_NOT_INTERFACE_ZERO);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, USB_TOO_MANY_ENDPOINTS, SAFE_MODE_USB_TOO_MANY_ENDPOINTS);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, USB_TOO_MANY_INTERFACE_NAMES, SAFE_MODE_USB_TOO_MANY_INTERFACE_NAMES);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, USER, SAFE_MODE_USER);
+MAKE_ENUM_VALUE(supervisor_safe_mode_reason_type, safe_mode_reason, WATCHDOG, SAFE_MODE_WATCHDOG);
+
+
+//| class SafeModeReason:
+//|     """The reason that CircuitPython went into safe mode.
+//|
+//|     **Limitations**: Class not available on builds that do not implement ``safemode.py``.
+//|     """
+//|
+MAKE_ENUM_MAP(supervisor_safe_mode_reason) {
+
+//|     NONE: object
+//|     """CircuitPython is not in safe mode."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, NONE),
+
+//|     BROWNOUT: object
+//|     """The microcontroller voltage dropped too low."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, BROWNOUT),
+
+// alphabetical from here down
+
+//|     FLASH_WRITE_FAIL: object
+//|     """Could not write to flash memory."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, FLASH_WRITE_FAIL),
+
+//|     GC_ALLOC_OUTSIDE_VM: object
+//|     """CircuitPython tried to allocate storage when its virtual machine was not running."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, GC_ALLOC_OUTSIDE_VM),
+
+//|     HARD_FAULT: object
+//|     """The microcontroller detected a fault, such as an out-of-bounds memory write."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, HARD_FAULT),
+
+//|     INTERRUPT_ERROR: object
+//|     """Internal error related to interrupts."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, INTERRUPT_ERROR),
+
+//|     NLR_JUMP_FAIL: object
+//|     """An error occurred during exception handling, possibly due to memory corruption."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, NLR_JUMP_FAIL),
+
+//|     NO_CIRCUITPY: object
+//|     """The CIRCUITPY drive was not available."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, NO_CIRCUITPY),
+
+//|     NO_HEAP: object
+//|     """Heap storage was not present."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, NO_HEAP),
+
+//|     PROGRAMMATIC: object
+//|     """The program entered safe mode using the `supervisor` module."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, PROGRAMMATIC),
+
+//|     SDK_FATAL_ERROR: object
+//|     """Third party firmware reported a fatal error."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, SDK_FATAL_ERROR),
+
+//|     STACK_OVERFLOW: object
+//|     """The CircuitPython heap was corrupted because the stack was too small."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, STACK_OVERFLOW),
+
+//|     USB_BOOT_DEVICE_NOT_INTERFACE_ZERO: object
+//|     """The USB HID boot device was not set up to be the first device, on interface #0."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, USB_BOOT_DEVICE_NOT_INTERFACE_ZERO),
+
+//|     USB_TOO_MANY_ENDPOINTS: object
+//|     """USB devices need more endpoints than are available."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, USB_TOO_MANY_ENDPOINTS),
+
+//|     USB_TOO_MANY_INTERFACE_NAMES: object
+//|     """USB devices specify too many interface names."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, USB_TOO_MANY_INTERFACE_NAMES),
+
+//|     USER: object
+//|     """The user pressed one or more buttons to enter safe mode.
+//|     This safe mode does **not** cause ``safemode.py`` to be run, since its purpose
+//|     is to prevent all user code from running.
+//|     This allows errors in ``safemode.py`` to be corrected easily.
+//|     """
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, USER),
+
+//|     SAFE_MODE_WATCHDOG: object
+//|     """An internal watchdog timer expired."""
+//|
+    MAKE_ENUM_MAP_ENTRY(safe_mode_reason, WATCHDOG),
+};
+
+STATIC MP_DEFINE_CONST_DICT(supervisor_safe_mode_reason_locals_dict, supervisor_safe_mode_reason_locals_table);
+
+MAKE_PRINTER(supervisor, supervisor_safe_mode_reason);
+
+MAKE_ENUM_TYPE(supervisor, SafeModeReason, supervisor_safe_mode_reason);

shared-bindings/supervisor/SafeModeReason.h

@@ -0,0 +1,31 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Dan Halbert for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#pragma once
+
+#include "supervisor/shared/safe_mode.h"
+
+extern const mp_obj_type_t supervisor_safe_mode_reason_type;

shared-bindings/supervisor/__init__.c

@@ -336,6 +336,11 @@ STATIC const mp_rom_map_elem_t supervisor_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_runtime),  MP_ROM_PTR(&common_hal_supervisor_runtime_obj) },
     { MP_ROM_QSTR(MP_QSTR_reload),  MP_ROM_PTR(&supervisor_reload_obj) },
     { MP_ROM_QSTR(MP_QSTR_RunReason),  MP_ROM_PTR(&supervisor_run_reason_type) },
+    #if CIRCUITPY_SAFEMODE_PY
+    { MP_ROM_QSTR(MP_QSTR_SafeModeReason),  MP_ROM_PTR(&supervisor_safe_mode_reason_type) },
+    #else
+    { MP_ROM_QSTR(MP_QSTR_SafeModeReason),  MP_ROM_NONE },
+    #endif
     { MP_ROM_QSTR(MP_QSTR_set_next_code_file),  MP_ROM_PTR(&supervisor_set_next_code_file_obj) },
     { MP_ROM_QSTR(MP_QSTR_ticks_ms),  MP_ROM_PTR(&supervisor_ticks_ms_obj) },
     { MP_ROM_QSTR(MP_QSTR_get_previous_traceback),  MP_ROM_PTR(&supervisor_get_previous_traceback_obj) },

supervisor/messages/default.h

@@ -1,99 +0,0 @@
-/*
- * This file is part of the MicroPython project, http://micropython.org/
- *
- * The MIT License (MIT)
- *
- * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef MICROPY_SUPERVISOR_MESSAGES_DEFAULT_H
-#define MICROPY_SUPERVISOR_MESSAGES_DEFAULT_H
-
-#ifndef MSG_OUTPUT_SUFFIX
-#define MSG_OUTPUT_SUFFIX " output:\r\n"
-#endif
-
-#ifndef MSG_NEWLINE
-#define MSG_NEWLINE "\r\n"
-#endif
-
-#ifndef MSG_AUTORELOAD_ON
-#define MSG_AUTORELOAD_ON "Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\r\n"
-#endif
-
-#ifndef MSG_AUTORELOAD_OFF
-#define MSG_AUTORELOAD_OFF "Auto-reload is off.\r\n"
-#endif
-
-#ifndef MSG_SAFE_MODE_ON
-#define MSG_SAFE_MODE_ON "Running in safe mode! Auto-reload is off.\r\n"
-#endif
-
-#ifndef MSG_SAFE_MODE_NO_MAIN
-#define MSG_SAFE_MODE_NO_MAIN "Running in safe mode! Not running saved code.\r\n"
-#endif
-
-#ifndef MSG_SAFE_MODE_USER_REQUESTED
-#define MSG_SAFE_MODE_USER_REQUESTED "You requested starting safe mode by "
-#endif
-
-#ifndef MSG_SAFE_MODE_USER_EXIT
-#define MSG_SAFE_MODE_USER_EXIT "To exit, please reset the board without "
-#endif
-
-#ifndef MSG_BAD_SAFE_MODE
-#define MSG_BAD_SAFE_MODE "You are running in safe mode which means something really bad happened."
-#endif
-
-#ifndef MSG_SAFE_MODE_CRASH
-#define MSG_SAFE_MODE_CRASH "Looks like our core CircuitPython code crashed hard. Whoops!"
-#endif
-
-#ifndef MSG_SAFE_MODE_FILE_ISSUE
-#define MSG_SAFE_MODE_FILE_ISSUE "Please file an issue here with the contents of your CIRCUITPY drive:"
-#endif
-
-#ifndef MSG_SAFE_MODE_ISSUE_LINK
-#define MSG_SAFE_MODE_ISSUE_LINK "https://github.com/adafruit/circuitpython/issues"
-#endif
-
-#ifndef MSG_SAFE_MODE_BROWN_OUT_LINE_1
-#define MSG_SAFE_MODE_BROWN_OUT_LINE_1 "The microcontroller's power dipped. Please make sure your power supply provides"
-#endif
-
-#ifndef MSG_SAFE_MODE_BROWN_OUT_LINE_2
-#define MSG_SAFE_MODE_BROWN_OUT_LINE_2 "enough power for the whole circuit and press reset (after ejecting CIRCUITPY)."
-#endif
-
-#ifndef MSG_WAIT_BEFORE_REPL
-#define MSG_WAIT_BEFORE_REPL "Press any key to enter the REPL. Use CTRL-D to reload."
-#endif
-
-// Be careful, some tools depend on this.
-#ifndef MSG_SOFT_REBOOT
-#define MSG_SOFT_REBOOT "soft reboot"
-#endif
-
-#ifndef MSG_DOUBLE_FILE_EXTENSION
-#define MSG_DOUBLE_FILE_EXTENSION "WARNING: Your code filename has two extensions\r\n"
-#endif
-
-#endif  // MICROPY_SUPERVISOR_MESSAGES_DEFAULT_H

supervisor/shared/safe_mode.c

@@ -43,20 +43,28 @@
 #define SAFE_MODE_DATA_GUARD 0xad0000af
 #define SAFE_MODE_DATA_GUARD_MASK 0xff0000ff
 
-static safe_mode_t current_safe_mode;
+static safe_mode_t _safe_mode;
+
+safe_mode_t get_safe_mode(void) {
+    return _safe_mode;
+}
+
+void set_safe_mode(safe_mode_t safe_mode) {
+    _safe_mode = safe_mode;
+}
 
 safe_mode_t wait_for_safe_mode_reset(void) {
     uint32_t reset_state = port_get_saved_word();
-    safe_mode_t safe_mode = NO_SAFE_MODE;
+    safe_mode_t safe_mode = SAFE_MODE_NONE;
     if ((reset_state & SAFE_MODE_DATA_GUARD_MASK) == SAFE_MODE_DATA_GUARD) {
         safe_mode = (reset_state & ~SAFE_MODE_DATA_GUARD_MASK) >> 8;
     }
-    if (safe_mode != NO_SAFE_MODE) {
+    if (safe_mode != SAFE_MODE_NONE) {
         port_set_saved_word(SAFE_MODE_DATA_GUARD);
-        current_safe_mode = safe_mode;
+        _safe_mode = safe_mode;
         return safe_mode;
     } else {
-        current_safe_mode = 0;
+        _safe_mode = SAFE_MODE_NONE;
     }
 
     const mcu_reset_reason_t reset_reason = common_hal_mcu_processor_get_reset_reason();
@@ -64,12 +72,12 @@ safe_mode_t wait_for_safe_mode_reset(void) {
         reset_reason != RESET_REASON_RESET_PIN &&
         reset_reason != RESET_REASON_UNKNOWN &&
         reset_reason != RESET_REASON_SOFTWARE) {
-        return NO_SAFE_MODE;
+        return SAFE_MODE_NONE;
     }
     #if CIRCUITPY_SKIP_SAFE_MODE_WAIT
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
     #endif
-    port_set_saved_word(SAFE_MODE_DATA_GUARD | (MANUAL_SAFE_MODE << 8));
+    port_set_saved_word(SAFE_MODE_DATA_GUARD | (SAFE_MODE_USER << 8));
     // Wait for a while to allow for reset.
 
     #if CIRCUITPY_STATUS_LED
@@ -106,11 +114,11 @@ safe_mode_t wait_for_safe_mode_reset(void) {
     status_led_deinit();
     #endif
     if (boot_in_safe_mode) {
-        return USER_SAFE_MODE;
+        return SAFE_MODE_USER;
     }
     // Restore the original state of the saved word if no reset occured during our wait period.
     port_set_saved_word(reset_state);
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void safe_mode_on_next_reset(safe_mode_t reason) {
@@ -119,7 +127,7 @@ void safe_mode_on_next_reset(safe_mode_t reason) {
 
 // Don't inline this so it's easy to break on it from GDB.
 void __attribute__((noinline,)) reset_into_safe_mode(safe_mode_t reason) {
-    if (current_safe_mode > BROWNOUT && reason > BROWNOUT) {
+    if (_safe_mode > SAFE_MODE_BROWNOUT && reason > SAFE_MODE_BROWNOUT) {
         while (true) {
             // This very bad because it means running in safe mode didn't save us. Only ignore brownout
             // because it may be due to a switch bouncing.
@@ -133,105 +141,95 @@ void __attribute__((noinline,)) reset_into_safe_mode(safe_mode_t reason) {
 
 
 void print_safe_mode_message(safe_mode_t reason) {
-    if (reason == NO_SAFE_MODE) {
+    if (reason == SAFE_MODE_NONE) {
         return;
     }
 
-    serial_write("\r\n");
-    serial_write_compressed(translate("You are in safe mode because:\n"));
+    serial_write_compressed(translate("\nYou are in safe mode because:\n"));
 
     const compressed_string_t *message = NULL;
 
     // First check for safe mode reasons that do not necessarily reflect bugs.
 
     switch (reason) {
-        case USER_SAFE_MODE:
+        case SAFE_MODE_BROWNOUT:
+            message = translate("The power dipped. Make sure you are providing enough power.");
+            break;
+        case SAFE_MODE_USER:
             #if defined(BOARD_USER_SAFE_MODE_ACTION)
             message = BOARD_USER_SAFE_MODE_ACTION;
             #elif defined(CIRCUITPY_BOOT_BUTTON)
-            message = translate("The BOOT button was pressed at start up.\n");
-            #endif
-            #if defined(BOARD_USER_SAFE_MODE_ACTION) || defined(CIRCUITPY_BOOT_BUTTON)
-            // Output a user safe mode string if it's set.
-            serial_write_compressed(message);
-            message = translate("To exit, please reset the board without requesting safe mode.");
-            // The final piece is printed below.
+            message = translate("You pressed the BOOT button at start up");
+            #else
+            message = translate("You pressed the reset button during boot.");
             #endif
             break;
-        case MANUAL_SAFE_MODE:
-            message = translate("You pressed the reset button during boot. Press again to exit safe mode.");
+        case SAFE_MODE_NO_CIRCUITPY:
+            message = translate("CIRCUITPY drive could not be found or created.");
             break;
-        case PROGRAMMATIC_SAFE_MODE:
-            message = translate("The `microcontroller` module was used to boot into safe mode. Press reset to exit safe mode.");
+        case SAFE_MODE_PROGRAMMATIC:
+            message = translate("The `microcontroller` module was used to boot into safe mode.");
             break;
-        case BROWNOUT:
-            message = translate("The microcontroller's power dipped. Make sure your power supply provides\nenough power for the whole circuit and press reset (after ejecting CIRCUITPY).");
+        #if CIRCUITPY_SAFEMODE_PY
+        case SAFE_MODE_SAFEMODE_PY_ERROR:
+            message = translate("Error in safemode.py.");
             break;
-        case USB_TOO_MANY_ENDPOINTS:
+        #endif
+        case SAFE_MODE_STACK_OVERFLOW:
+            message = translate("Heap was corrupted because the stack was too small. Increase stack size.");
+            break;
+        case SAFE_MODE_USB_TOO_MANY_ENDPOINTS:
             message = translate("USB devices need more endpoints than are available.");
             break;
-        case USB_TOO_MANY_INTERFACE_NAMES:
+        case SAFE_MODE_USB_TOO_MANY_INTERFACE_NAMES:
             message = translate("USB devices specify too many interface names.");
             break;
-        case USB_BOOT_DEVICE_NOT_INTERFACE_ZERO:
-            message = translate("Boot device must be first device (interface #0).");
+        case SAFE_MODE_USB_BOOT_DEVICE_NOT_INTERFACE_ZERO:
+            message = translate("Boot device must be first (interface #0).");
             break;
-        case WATCHDOG_RESET:
+        case SAFE_MODE_WATCHDOG:
             message = translate("Internal watchdog timer expired.");
             break;
-        case NO_CIRCUITPY:
-            message = translate("CIRCUITPY drive could not be found or created.");
-            break;
         default:
             break;
     }
 
     if (message) {
+        // Non-crash safe mode.
         serial_write_compressed(message);
-        serial_write("\r\n");
-        return;
-    }
-
+    } else {
         // Something worse happened.
-
         serial_write_compressed(translate("CircuitPython core code crashed hard. Whoops!\n"));
-
         switch (reason) {
-        case HARD_CRASH:
-            message = translate("Crash into the HardFault_Handler.");
+            case SAFE_MODE_GC_ALLOC_OUTSIDE_VM:
+                message = translate("Heap allocation when VM not running.");
                 break;
-        case MICROPY_NLR_JUMP_FAIL:
-            message = translate("NLR jump failed. Likely memory corruption.");
-            break;
-        case MICROPY_FATAL_ERROR:
-            message = translate("Fatal error.");
-            break;
-        case NO_HEAP:
-            message = translate("CircuitPython was unable to allocate the heap.");
-            break;
-        case HEAP_OVERWRITTEN:
-            message = translate("The CircuitPython heap was corrupted because the stack was too small.\nIncrease the stack size if you know how. If not:");
-            break;
-        case GC_ALLOC_OUTSIDE_VM:
-            message = translate("Attempted heap allocation when VM not running.");
-            break;
-            #ifdef SOFTDEVICE_PRESENT
-        // defined in ports/nrf/bluetooth/bluetooth_common.mk
-        // will print "Unknown reason" if somehow encountered on other ports
-        case NORDIC_SOFT_DEVICE_ASSERT:
-            message = translate("Nordic system firmware failure assertion.");
-            break;
-            #endif
-        case FLASH_WRITE_FAIL:
+            case SAFE_MODE_FLASH_WRITE_FAIL:
                 message = translate("Failed to write internal flash.");
                 break;
-        case MEM_MANAGE:
-            message = translate("Invalid memory access.");
+            case SAFE_MODE_HARD_FAULT:
+                message = translate("Fault detected by hardware.");
+                break;
+            case SAFE_MODE_INTERRUPT_ERROR:
+                message = translate("Interrupt error.");
+                break;
+            case SAFE_MODE_NLR_JUMP_FAIL:
+                message = translate("NLR jump failed. Likely memory corruption.");
+                break;
+            case SAFE_MODE_NO_HEAP:
+                message = translate("Unable to allocate the heap.");
+                break;
+            case SAFE_MODE_SDK_FATAL_ERROR:
+                message = translate("Third-party firmware fatal error.");
                 break;
             default:
                 message = translate("Unknown reason.");
                 break;
         }
         serial_write_compressed(message);
-    serial_write_compressed(translate("\nPlease file an issue with the contents of your CIRCUITPY drive at \nhttps://github.com/adafruit/circuitpython/issues\n"));
+        serial_write_compressed(translate("\nPlease file an issue with your program at https://github.com/adafruit/circuitpython/issues."));
+    }
+
+    // Always tell user how to get out of safe mode.
+    serial_write_compressed(translate("\nPress reset to exit safe mode.\n"));
 }

supervisor/shared/safe_mode.h

@@ -30,27 +30,32 @@
 #include "py/mpconfig.h"
 
 typedef enum {
-    NO_SAFE_MODE = 0,
-    BROWNOUT,
-    HARD_CRASH,
-    USER_SAFE_MODE,
-    HEAP_OVERWRITTEN,
-    MANUAL_SAFE_MODE,
-    MICROPY_NLR_JUMP_FAIL,
-    MICROPY_FATAL_ERROR,
-    GC_ALLOC_OUTSIDE_VM,
-    PROGRAMMATIC_SAFE_MODE,
-    NORDIC_SOFT_DEVICE_ASSERT,
-    FLASH_WRITE_FAIL,
-    MEM_MANAGE,
-    WATCHDOG_RESET,
-    USB_TOO_MANY_ENDPOINTS,
-    USB_TOO_MANY_INTERFACE_NAMES,
-    USB_BOOT_DEVICE_NOT_INTERFACE_ZERO,
-    NO_HEAP,
-    NO_CIRCUITPY,
+    SAFE_MODE_NONE = 0,
+    // BROWNOUT should be lowest after SAFE_MODE_NONE.
+    SAFE_MODE_BROWNOUT,
+    // alphabetical from here down
+    SAFE_MODE_FLASH_WRITE_FAIL,
+    SAFE_MODE_GC_ALLOC_OUTSIDE_VM,
+    SAFE_MODE_HARD_FAULT,
+    SAFE_MODE_INTERRUPT_ERROR,
+    SAFE_MODE_MANUAL,
+    SAFE_MODE_NLR_JUMP_FAIL,
+    SAFE_MODE_NO_CIRCUITPY,
+    SAFE_MODE_NO_HEAP,
+    SAFE_MODE_PROGRAMMATIC,
+    SAFE_MODE_SAFEMODE_PY_ERROR,
+    SAFE_MODE_SDK_FATAL_ERROR,
+    SAFE_MODE_STACK_OVERFLOW,
+    SAFE_MODE_USB_BOOT_DEVICE_NOT_INTERFACE_ZERO,
+    SAFE_MODE_USB_TOO_MANY_ENDPOINTS,
+    SAFE_MODE_USB_TOO_MANY_INTERFACE_NAMES,
+    SAFE_MODE_USER,
+    SAFE_MODE_WATCHDOG,
 } safe_mode_t;
 
+safe_mode_t get_safe_mode(void);
+void set_safe_mode(safe_mode_t safe_mode);
+
 safe_mode_t wait_for_safe_mode_reset(void);
 
 void safe_mode_on_next_reset(safe_mode_t reason);

supervisor/shared/stack.c

@@ -74,7 +74,7 @@ inline bool stack_ok(void) {
 
 inline void assert_heap_ok(void) {
     if (!stack_ok()) {
-        reset_into_safe_mode(HEAP_OVERWRITTEN);
+        reset_into_safe_mode(SAFE_MODE_STACK_OVERFLOW);
     }
 }
 

supervisor/shared/usb/usb_desc.c

@@ -228,7 +228,7 @@ static void usb_build_configuration_descriptor(void) {
         if (usb_hid_boot_device() > 0 && descriptor_counts.current_interface > 0) {
             // Hosts using boot devices generally to expect them to be at interface zero,
             // and will not work properly otherwise.
-            reset_into_safe_mode(USB_BOOT_DEVICE_NOT_INTERFACE_ZERO);
+            reset_into_safe_mode(SAFE_MODE_USB_BOOT_DEVICE_NOT_INTERFACE_ZERO);
         }
         descriptor_buf_remaining += usb_hid_add_descriptor(
             descriptor_buf_remaining, &descriptor_counts, &current_interface_string,
@@ -258,14 +258,14 @@ static void usb_build_configuration_descriptor(void) {
     if (descriptor_counts.current_endpoint > USB_NUM_ENDPOINT_PAIRS ||
         descriptor_counts.num_in_endpoints > USB_NUM_IN_ENDPOINTS ||
         descriptor_counts.num_out_endpoints > USB_NUM_OUT_ENDPOINTS) {
-        reset_into_safe_mode(USB_TOO_MANY_ENDPOINTS);
+        reset_into_safe_mode(SAFE_MODE_USB_TOO_MANY_ENDPOINTS);
     }
 }
 
 // str must not be on the heap.
 void usb_add_interface_string(uint8_t interface_string_index, const char str[]) {
     if (interface_string_index > MAX_INTERFACE_STRINGS) {
-        reset_into_safe_mode(USB_TOO_MANY_INTERFACE_NAMES);
+        reset_into_safe_mode(SAFE_MODE_USB_TOO_MANY_INTERFACE_NAMES);
     }
 
     collected_interface_strings[interface_string_index].char_str = str;

supervisor/stub/safe_mode.c

@@ -29,7 +29,7 @@
 #include <stdlib.h>
 
 safe_mode_t wait_for_safe_mode_reset(void) {
-    return NO_SAFE_MODE;
+    return SAFE_MODE_NONE;
 }
 
 void reset_into_safe_mode(safe_mode_t reason) {